titanium and feldspar
titanium has been researched along with feldspar in 18 studies
Research
Studies (18)
| Timeframe | Studies, this research(%) | All Research% |
|---|---|---|
| pre-1990 | 0 (0.00) | 18.7374 |
| 1990's | 0 (0.00) | 18.2507 |
| 2000's | 8 (44.44) | 29.6817 |
| 2010's | 10 (55.56) | 24.3611 |
| 2020's | 0 (0.00) | 2.80 |
Authors
| Authors | Studies |
|---|---|
| Heydecke, G; Razzoog, ME; Zhang, F | 1 |
| Eskitascioglu, G; Sevimay, M; Soykan, E; Unsal, E; Usumez, A | 1 |
| Driscoll, CF; Masri, R; Prestipino, V; Rasetto, FH; von Fraunhofer, JA | 1 |
| Homann, F; Swain, MV; Waddell, JN | 1 |
| Bouhy, A; Moureau, T; Raepsaet, N; Vanheusden, A | 1 |
| Blatz, MB; Chiche, G; Holst, S; Oppes, S; Sadan, A | 1 |
| Kimpara, ET; Ozcan, M; Vásquez, VZ | 1 |
| Burnett, LH; da Silva, IN; Mota, EG; Oshima, HM; Segundo, RM; Silva, LL | 1 |
| de Carvalho, PS; Falcón-Antenucci, RM; Goiato, MC; Noritomi, PY; Pellizzer, EP | 1 |
| Brüllmann, DD; d'Hoedt, B; Klein, MO; Lehmann, KM; Pabst, A; Ziebart, T | 1 |
| Bressan, E; Corazza, B; Favero, G; Lops, D; Paniz, G; Romeo, E | 1 |
| Erkmen, E; Eser, A; Kurt, A; Merıç, G; özden, AU | 1 |
| Bukelskiene, V; Juciute, R; Puriene, A; Rutkunas, V; Sabaliauskas, V; Trumpaite-Vanagiene, R | 1 |
| Chen, XY; Nie, EM; Zhang, CY; Zhang, MC | 1 |
| Gotfredsen, K; Hosseini, M; Kleven, E | 1 |
| de Carvalho, PS; de Faria Almeida, DA; Pellizzer, EP; Santiago, JF; Verri, FR | 1 |
| Bertolini, Mde M; Kempen, J; Lourenço, EJ; Telles, Dde M | 1 |
| El-Bediwi, AB; El-Fallal, A; Ozcan, M; Saker, S | 1 |
Trials
4 trial(s) available for titanium and feldspar
| Article | Year |
|---|---|
Influence of water, loading rate and bonder on the adhesion of porcelain to titanium.
Topics: Adhesiveness; Aluminum Silicates; Dental Bonding; Dental Materials; Dental Porcelain; Dental Veneers; Elasticity; Gold Alloys; Humans; Kerosene; Materials Testing; Metal Ceramic Alloys; Palladium; Pliability; Potassium Compounds; Solvents; Stress, Mechanical; Surface Properties; Titanium; Water | 2006 |
Influence of cementation technique on fracture strength and leakage of alumina all-ceramic crowns after cyclic loading.
Topics: Aluminum Oxide; Aluminum Silicates; Bite Force; Cementation; Composite Resins; Crowns; Dental Bonding; Dental Cements; Dental Leakage; Dental Porcelain; Dental Restoration Failure; Dentin-Bonding Agents; Humans; Materials Testing; Metal Ceramic Alloys; Methacrylates; Potassium Compounds; Resin Cements; Saliva, Artificial; Stress, Mechanical; Titanium; Zinc Phosphate Cement | 2008 |
Evaluation of interface characterization and adhesion of glass ceramics to commercially pure titanium and gold alloy after thermal- and mechanical-loading.
Topics: Aluminum Oxide; Aluminum Silicates; Ceramics; Dental Bonding; Dental Etching; Dental Materials; Dental Porcelain; Dental Stress Analysis; Electron Probe Microanalysis; Gold Alloys; Humans; Materials Testing; Metal Ceramic Alloys; Microscopy, Electron, Scanning; Palladium; Potassium Compounds; Shear Strength; Silicon; Stress, Mechanical; Surface Properties; Temperature; Titanium; Water | 2009 |
Influence of abutment material on the gingival color of implant-supported all-ceramic restorations: a prospective multicenter study.
Topics: Aluminum Silicates; Color; Computer-Aided Design; Crowns; Dental Abutments; Dental Implantation, Endosseous; Dental Implants, Single-Tooth; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Gingiva; Gold Alloys; Humans; Image Processing, Computer-Assisted; Maxilla; Potassium Compounds; Prospective Studies; Software; Spectrophotometry; Titanium; Zirconium | 2011 |
Other Studies
14 other study(ies) available for titanium and feldspar
| Article | Year |
|---|---|
In vitro color stability of double-layer veneers after accelerated aging.
Topics: Aluminum Oxide; Aluminum Silicates; Analysis of Variance; Color; Colorimetry; Composite Resins; Dental Bonding; Dental Porcelain; Dental Veneers; Esthetics, Dental; Humans; Light; Materials Testing; Metal Ceramic Alloys; Potassium Compounds; Statistics as Topic; Thermodynamics; Time Factors; Titanium | 2001 |
The influence of occlusal loading location on stresses transferred to implant-supported prostheses and supporting bone: A three-dimensional finite element study.
Topics: Aluminum Silicates; Bicuspid; Bite Force; Chromium Alloys; Crowns; Dental Implants; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Denture, Partial, Fixed; Finite Element Analysis; Humans; Imaging, Three-Dimensional; Mandible; Metal Ceramic Alloys; Potassium Compounds; Stress, Mechanical; Surface Properties; Titanium; Weight-Bearing | 2004 |
Light transmission through all-ceramic dental materials: a pilot study.
Topics: Aluminum Oxide; Aluminum Silicates; Analysis of Variance; Ceramics; Dental Materials; Dental Porcelain; Dental Veneers; Humans; Light; Lighting; Materials Testing; Metal Ceramic Alloys; Optics and Photonics; Pilot Projects; Polymers; Potassium Compounds; Radiometry; Resin Cements; Surface Properties; Titanium | 2004 |
[The classification of ceramics according to its chemical nature and its method of production].
Topics: Aluminum Oxide; Aluminum Silicates; Biomimetic Materials; Ceramics; Computer-Aided Design; Dental Porcelain; Dental Prosthesis Design; Glass; Hot Temperature; Humans; Lithium Compounds; Magnesium Oxide; Metal Ceramic Alloys; Phase Transition; Potassium Compounds; Titanium; Yttrium; Zirconium | 2006 |
Stress distribution of an internal connection implant prostheses set: a 3D finite element analysis.
Topics: Alloys; Aluminum Silicates; Biomechanical Phenomena; Computer Simulation; Computer-Aided Design; Crowns; Dental Abutments; Dental Alloys; Dental Implants; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Finite Element Analysis; Gold Alloys; Humans; Imaging, Three-Dimensional; Materials Testing; Models, Biological; Potassium Compounds; Stress, Mechanical; Surface Properties; Titanium | 2009 |
Influence of cusp inclination on stress distribution in implant-supported prostheses. A three-dimensional finite element analysis.
Topics: Aluminum Silicates; Biomechanical Phenomena; Chromium Alloys; Computer Simulation; Computer-Aided Design; Crowns; Dental Abutments; Dental Implants, Single-Tooth; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Elastic Modulus; Finite Element Analysis; Humans; Imaging, Three-Dimensional; Mandible; Materials Testing; Metal Ceramic Alloys; Models, Biological; Potassium Compounds; Software; Stress, Mechanical; Surface Properties; Titanium; Tomography, X-Ray Computed | 2010 |
Counting touching cell nuclei using fast ellipse detection to assess in vitro cell characteristics: a feasibility study.
Topics: Algorithms; Aluminum Silicates; Biocompatible Materials; Bone Density Conservation Agents; Cell Count; Cell Culture Techniques; Cell Nucleus; Cell Proliferation; Cell Size; Ceramics; Diphosphonates; Endothelial Cells; False Negative Reactions; False Positive Reactions; Feasibility Studies; Fibroblasts; Fluorescent Dyes; Humans; Ibandronic Acid; Image Processing, Computer-Assisted; Microscopy; Osteogenesis; Pamidronate; Potassium Compounds; Software; Stem Cells; Time Factors; Titanium | 2012 |
Biomechanical effects of two different collar implant structures on stress distribution under cantilever fixed partial dentures.
Topics: Alloys; Aluminum Silicates; Biomechanical Phenomena; Chromium Alloys; Computer Simulation; Dental Abutments; Dental Alloys; Dental Implant-Abutment Design; Dental Implants; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Veneers; Denture Design; Denture, Partial, Fixed; Elastic Modulus; Finite Element Analysis; Humans; Imaging, Three-Dimensional; Mandible; Models, Biological; Osseointegration; Potassium Compounds; Stress, Mechanical; Surface Properties; Titanium | 2011 |
In vitro evaluation of cytotoxicity of permanent prosthetic materials.
Topics: Aluminum Silicates; Cell Adhesion; Cell Proliferation; Cell Survival; Cells, Cultured; Chromium Alloys; Colorimetry; Coloring Agents; Dental Materials; Dental Porcelain; Dental Prosthesis; Fibroblasts; Gingiva; Gold Alloys; Humans; Materials Testing; Potassium Compounds; Temperature; Tetrazolium Salts; Thiazoles; Time Factors; Titanium | 2011 |
Treatment planning of implants when 3 mandibular posterior teeth are missing: a 3-dimensional finite element analysis.
Topics: Aluminum Silicates; Biomechanical Phenomena; Bite Force; Computer Simulation; Crowns; Dental Implants; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Finite Element Analysis; Humans; Imaging, Three-Dimensional; Jaw, Edentulous, Partially; Mandible; Models, Biological; Patient Care Planning; Potassium Compounds; Stress, Mechanical; Titanium | 2012 |
Fracture mode during cyclic loading of implant-supported single-tooth restorations.
Topics: Aluminum Silicates; Crowns; Dental Implants, Single-Tooth; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Humans; Materials Testing; Metal Ceramic Alloys; Potassium Compounds; Titanium; Weight-Bearing; Zirconium | 2012 |
Influence of tapered and external hexagon connections on bone stresses around tilted dental implants: three-dimensional finite element method with statistical analysis.
Topics: Aluminum Silicates; Alveolar Process; Bite Force; Chromium Alloys; Computer Simulation; Dental Implant-Abutment Design; Dental Implantation, Endosseous; Dental Implants; Dental Materials; Dental Porcelain; Elastic Modulus; Finite Element Analysis; Humans; Imaging, Three-Dimensional; Models, Biological; Poisson Distribution; Potassium Compounds; Stress, Mechanical; Titanium; Zinc Phosphate Cement | 2014 |
The use of CAD/CAM technology to fabricate a custom ceramic implant abutment: a clinical report.
Topics: Adult; Aluminum Silicates; Cementation; Ceramics; Computer-Aided Design; Crowns; Dental Abutments; Dental Implant-Abutment Design; Dental Implants, Single-Tooth; Dental Materials; Dental Porcelain; Dental Restoration, Temporary; Dental Veneers; Esthetics, Dental; Female; Follow-Up Studies; Gingiva; Humans; Potassium Compounds; Resin Cements; Surface Properties; Titanium; Zirconium | 2014 |
Effect of non-ionizing radio frequency signals of magnetic resonance imaging on physical properties of dental alloys and metal-ceramic adhesion.
Topics: Aluminum Oxide; Aluminum Silicates; Chromium Alloys; Dental Alloys; Dental Bonding; Dental Etching; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Hardness; Magnetic Fields; Magnetic Resonance Imaging; Physical Phenomena; Potassium Compounds; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Titanium; Ultrasonics; Water; X-Ray Diffraction | 2014 |