vendex and Postoperative-Complications

Most orthodontic mini-implants (OMIs) are inserted between dental roots. The prevalence of contacting these structures is high. Such contacts can cause permanent root damage and implant instability. Increased torque levels during implant insertion (the index test) could be a more accurate and immediate measure for diagnosing implant-root contact (the target condition) than radiographs (the reference standard) and could ultimately lead to a reduction or elimination of X-ray exposure. To address this issue, we asked three questions: (1) whether OMIs with root contact had higher insertion torque values than those without, (2) what is the accuracy of the index test compared with the reference standard to diagnose the target condition and what are the adverse effects of the index test, and (3) whether intermediate torque values have clinical diagnostic utility.. Methods were conducted according to our published protocol, which was based on the PRISMA-P 2015 statement. We applied broad spectrum eligibility criteria that included randomized and non-randomized studies on clinical, animal, and cadaver models. Not including such models would be unethical because it could slow down knowledge creation on the adverse effects of implant insertion. We conducted searches in more than 40 electronic databases including MEDLINE and 10 journals were hand-searched. Grey literature and reference lists were also searched. All research procedures were conducted independently by three reviewers. Authors of selected studies were contacted to obtain additional information. Outcomes on the three different research models were analysed separately. Systematic error was assessed with the Cochrane 'Risk of bias tool' for non-randomized studies.. One clinical, two animal, and two cadaver studies fulfilled the eligibility criteria of the first research question. All studies and subgroups demonstrated higher insertion torque values for OMIs with the target condition than those without. Mean differences (MD) between these effect estimates were statistically significant in one beagle model (MD, 4.64; 95 % CI, 3.50 to 5.79) and three subgroups of cadaver studies (MD, 2.70; 95 % CI, 1.42 to 3.98) (MD, 3.97; 95 % CI, 2.17 to 5.78) (MD, 0.93; 95 % CI, 0.67 to 1.20). Highest mean differences were identified in most self-drilling compared with pre-drilling groups. Clinical heterogeneity between studies was high, and many items were underreported. All studies except one cadaver study scored at least one domain as 'serious risk' of bias. No studies addressed the second research question. One cadaver study addressed the third question which showed the importance of recording torque levels during the entire implant insertion process. Responses of contacted authors were helpful, but often difficult to obtain. Implants fractured in one animal and in one cadaver model.. All eligible studies scored higher insertion torque values for implants with root contact than those without, but none of these studies assessed the diagnostic accuracy of the index test. The inclusion of non-randomized and animal and cadaver models in this systematic review provided key findings that otherwise would have been wasted. Such studies are important in the context of the wide applicability of this test, the high prevalence of the target condition, and the underreporting of adverse effects of interventions. A protocol for a potential new diagnostic pathway was presented, and the importance of contacting authors was addressed. The applicability of the findings should be interpreted in the context of underreporting and the many limitations of the included studies.

Topics: Animals; Cadaver; Dental Implantation; Dental Implants; Humans; Orthodontic Anchorage Procedures; Postoperative Complications; Tooth Root; Torque

In this review we describe the advantages, complications, and preventive considerations encountered as a result of the use of a halo for distraction of a retrusive nasomaxillary complex. Distraction osteogenesis is a well accepted combined orthodontic-surgical technique used in the treatment of patients with hypoplastic craniofacial components. The rigid external distraction (RED) system is a useful external distraction device for the advancement of severe retrusive maxilla especially in cleft palate patients. However, the addition of this new technique to the surgeon's armamentarium is accompanied by new complications and risks. Review of the literature on complications of the use of halo revealed that most complications are pin related. Complications with the use of RED have mainly included the penetration of intracranial pins. Risk management and preventive considerations propose several procedures to minimize the side effects when using RED: preoperative skull computerized tomography, pediatric neurosurgical consultation, proper pin care during distraction, frequent monitoring of the patient's general condition, proper pin and torque design, and special attention to the removal process of the RED.

Topics: Adult; Bone Nails; Child; Cleft Palate; Equipment Design; Humans; Maxilla; Micrognathism; Oral Surgical Procedures; Osteogenesis, Distraction; Postoperative Complications; Risk Management; Torque

To determine whether knee stability, range of motion (ROM) and clinical scores differ between anterior-stabilized (AS) and posterior-stabilized (PS) total knee arthroplasty (TKA).. This prospective randomized controlled trial included 34 patients with severe bilateral knee osteoarthritis who underwent bilateral TKA between June 2010 and July 2011 using AS and PS designs of a single-implant system. AS TKA with ultracongruent inserts was performed in one knee and PS TKA with a cam-post mechanism was performed in the other knee in each patient. Clinical and radiological data from a mean follow-up period of 5 years, including ROM, clinical scores, peak knee torque determined by isokinetic test, knee joint laxity determined by Telos stress views, tourniquet time and subjects' preference were analyzed.. The mean postoperative knee flexion angle did not differ between groups until 1 year. Beginning 2 years postoperatively, the knee flexion angle decreased slightly in the AS group and was smaller than that in the PS group (p = 0.004). The mean Knee Society knee score was higher in the PS group than in the AS group after 2 years. The quadriceps strength did not differ between groups. The mean posterior laxity after TKA was 6-8 mm greater in the AS group than in the PS group. No radiological loosening was observed in either group. More subjects preferred PS knees to AS knees. However, this difference was not significant.. AS primary TKA was inferior to PS TKA in terms of posterior knee stability, postoperative knee flexion and clinical scores after 2 years.. Therapeutic study, Level 1.

Topics: Aged; Aged, 80 and over; Arthroplasty, Replacement, Knee; Female; Follow-Up Studies; Humans; Joint Instability; Knee Joint; Knee Prosthesis; Male; Middle Aged; Muscle Strength; Osteoarthritis, Knee; Postoperative Complications; Prospective Studies; Prosthesis Design; Quadriceps Muscle; Radiography; Range of Motion, Articular; Single-Blind Method; Torque

To compare the "all-inside technique" for anterior cruciate ligament (ACL) reconstruction using a short, quadrupled semitendinosus tendon (ST4) autograft and suspensory cortical fixation on both the femoral and tibial side vs the "conventional technique" using a semitendinosus/gracilis (ST/G) autograft fixed with a suspensory device on the femoral side and with an interference screw on the tibial side, in terms of clinical and functional outcomes.. A total of 90 patients were enrolled, randomised into two groups, and prospectively followed. Group A comprised 45 patients treated with the all-inside technique and Group B included 45 patients treated with the conventional ACL technique (55 males, 35 females; mean age 28.7 ± 11.3 years). Patients completed the Lysholm knee score, the International Knee Documentation Committee (IKDC) score, the Knee Injury and Osteoarthritis Score (KOOS), and the Knee Society Score (KSS) preoperatively and at 2 years postoperatively. Anterior tibial translation measurement (KT-1000 arthrometer) and isokinetic testing of the operative vs non-operative limb were also conducted and the limb symmetry index (LSI) was determined.. At 24 months, the Lysholm, IKDC, KOOS, and KSS scores between the two groups were similar (n.s.). Anterior tibial translation between the operative and non-operative knee was also similar among the two groups (n.s.). Patients of Group A had significantly higher mean LSIs in terms of flexor peak torque (1.0 ± 0.1 vs 0.9 ± 0.1; p < 0.001), time-to-peak (0.9 ± 0.1 vs 0.8 ± 0.1; p < 0.001) and total work (0.9 ± 0.1 vs 0.8 ± 0.1; p < 0.001) at 180°/s, and significantly better mean LSI for isometric flexor/extensor ratio at 90° (1.1 ± 0.3 vs 0.8 ± 0.2; p < 0.001).. The all-inside ACL reconstruction with an ST4 autograft and cortical button fixation on both ends is a viable alternative to the conventional technique. It affords preservation of knee flexor strength, which is of advantage, especially when treating athletes with ACL injury.. I.

Topics: Adolescent; Adult; Anterior Cruciate Ligament Injuries; Anterior Cruciate Ligament Reconstruction; Female; Femur; Follow-Up Studies; Hamstring Tendons; Humans; Joint Instability; Knee; Lysholm Knee Score; Male; Muscle Strength; Osteoarthritis, Knee; Postoperative Complications; Prospective Studies; Tibia; Torque; Transplantation, Autologous; Young Adult

To compare the clinical outcome of single, partial and complete fixed implant supported prostheses immediately loaded (within 48 h), early loaded at 6 weeks, and conventionally loaded at 3 months (delayed loading).. A total of 54 patients (18 requiring single implants, 18 partial fixed prostheses, and 18 total fixed cross-arch prostheses) were randomised in equal numbers at two private practices to immediate loading (18 patients), early loading (18 patients), and conventional loading (18 patients) according to a parallel group design with three arms. To be immediately or early loaded, implants had to be inserted with a torque superior to 40 Ncm. Implants were initially loaded with provisional prostheses, replaced after 4 months by definitive ones. Outcome measures were prosthesis and implant failures, complications and peri-implant marginal bone levels.. Two conventionally loaded patients rehabilitated with cross-arch fixed total prostheses dropped-out up to 1 year post-loading. No implant or prosthesis failed and three complications occurred, one in each loading group. Peri-implant marginal bone loss was 0.19 ± 0.44 mm at immediately loaded implants, 0.18 ± 0.66 mm at early loaded implants and 0.25 ± 0.28 mm at conventional loaded implants. There were no statistically significant differences in complications (P = 1.000) and bone loss (P = 0.806) between the three loading strategies.. All loading strategies were highly successful and no differences could be observed for implant survival and complications when loading implants immediately, early or conventionally.

Topics: Adult; Aged; Dental Implantation, Endosseous; Dental Implants; Dental Implants, Single-Tooth; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Female; Humans; Immediate Dental Implant Loading; Male; Middle Aged; Postoperative Complications; Torque; Treatment Outcome

  To quantify quadriceps weakness after anterior cruciate ligament reconstruction (ACLR), researchers have often analyzed only peak torque. However, analyzing other characteristics of the waveform, such as the rate of torque development (RTD), time to peak torque (TTP), and central activation ratio (CAR), can lend insight into the underlying neuromuscular factors that regulate torque development..   To determine if interlimb neuromuscular asymmetry was present in patients with ACLR at the time of clearance to return to activity..   Cross-sectional study..   Laboratory..   A total of 10 individuals serving as controls (6 men, 4 women; age = 23.50 ± 3.44 years, height = 1.73 ± 0.09 m, mass = 71.79 ± 9.91 kg) and 67 patients with ACLR (43 men, 24 women; age = 21.34 ± 5.73 years, height = 1.74 ± 0.11 m, mass = 77.85 ± 16.03 kg, time postsurgery = 7.52 ± 1.36 months) participated..   Isokinetic (60°/s) and isometric quadriceps strength were measured. Peak torque, TTP, and RTD were calculated across isometric and isokinetic trials, and CAR was calculated from the isometric trials via the superimposed burst. Repeated-measures analyses of variance were used to compare limbs in the ACLR and control groups..   No between-limbs differences were detected in the control group ( P > .05). In the ACLR group, the involved limb demonstrated a longer TTP for isokinetic strength ( P = .04; Cohen d effect size [ES] = 0.18; 95% confidence interval [CI] = -0.16, 0.52), lower RTD for isometric ( P < .001; Cohen d ES = 0.73; 95% CI = 0.38, 1.08) and isokinetic ( P < .001; Cohen d ES = 0.84; 95% CI = 0.49, 1.19) strength, lower CAR ( P < .001; Cohen d ES = 0.37; 95% CI = 0.03, 0.71), and lower peak torque for isometric ( P < .001; Cohen d ES = 1.28; 95% CI = 0.91, 1.65) and isokinetic ( P < .001; Cohen d ES = 1.15; 95% CI = 0.78, 1.52) strength..   Interlimb asymmetries at return to activity after ACLR appeared to be regulated by several underlying neuromuscular factors. We theorize that interlimb asymmetries in isometric and isokinetic quadriceps strength were associated with changes in muscle architecture. Reduced CAR, TTP, and RTD were also present, indicating a loss of motor-unit recruitment or decrease in firing rate.

Topics: Adolescent; Adult; Anterior Cruciate Ligament Injuries; Anterior Cruciate Ligament Reconstruction; Cross-Sectional Studies; Female; Humans; Isometric Contraction; Male; Motor Neurons; Muscle Strength; Postoperative Complications; Quadriceps Muscle; Torque; Young Adult

The purpose of this prospective randomized study was to assess whether uncomplicated mandible fractures could be treated successfully in an open or closed fashion using maxillomandibular fixation (MMF) screws.. This was a prospective institutional review board-approved study involving 20 adult patients who presented to the university emergency department or oral and maxillofacial surgical clinic with uncomplicated mandible fractures. Patients who met the exclusion criteria consented to enter the study in the open reduction internal fixation (ORIF) or the closed (MMF) study group. Six to 8 MMF screws were used to obtain intermaxillary fixation (IMF) in the 2 groups. Screw failure was documented. All screws were removed at 5 to 6 weeks postoperatively. Insertional torque (IT) was measured at time of screw placement to assess primary stability. Clinical and photographic documentation was performed to assess fracture healing, occlusion, and gingival health. Ten-centimeter visual analog scales were used to assess patient-centered outcomes. Cone-beam computed tomography was performed to assess the long-term effects on the periodontium and roots. A cost comparison was performed to determine whether the use of screws was cost effective compared with arch bars.. Fifteen men and 5 women (mean age, 25.2 yr) entered the study. All patients displayed adequate fracture healing based on clinical examination. All patients had acceptable occlusion at 5 to 6 weeks postoperatively. Total screw failure was 27 of 106 screws (25.5%). Forty percent of screws placed in the MMF group failed compared with only 6% in the ORIF group. Gingival health scores were favorable. Factors that had a significant effect on screw failure included a lower IT (P = .002), use in closed (MMF) treatment (P < .001), and use in the posterior jaw (P = .012). Minimal pain was associated with the MMF screws and pre-existing occlusion was re-established based on patients' subjective responses. The MMF group reported a statistically significant lower quality of life (P < .001) compared with the ORIF group. There was only 1 screw site that had a facial cortical bone defect noted at 6-month follow-up CBCT examination. There were no discernible long-term root defects. Cost analysis showed that the use of MMF screws saved around $600 per patient in operating room usage cost alone compared with the estimated use of arch bars.. Uncomplicated mandible fractures were successfully treated using MMF screws in open and closed treatments. However, the utility in closed treatment was decreased because of significant screw failure and patient noncompliance. The screws were well tolerated by the patients. There was minimal long-term damage to the periodontium and dental roots. The cost of screws was more than offset by time savings.

Topics: Activities of Daily Living; Adult; Alveolar Process; Bone Screws; Cone-Beam Computed Tomography; Cost-Benefit Analysis; Dental Occlusion, Centric; Equipment Failure; Female; Follow-Up Studies; Fracture Fixation, Internal; Fracture Healing; Gingiva; Gingivitis; Humans; Jaw Fixation Techniques; Male; Mandibular Fractures; Pain, Postoperative; Photography, Dental; Pilot Projects; Postoperative Complications; Prospective Studies; Quality of Life; Tooth Root; Torque; Treatment Outcome

To compare planning and patient rehabilitation using a 3D dental planning software and dedicated surgical guides with conventional rehabilitation of partially or fully edentulous patients using flapless or mini-flap procedures and immediate loading.. Fifty-one fully or partially edentulous patients requiring at least 2 implants to be restored with a single prosthesis, having at least 7 mm of bone height and 4 mm in bone width, had their implant rehabilitation planned on three-dimensional (3D) cone beam computed tomography (CBCT) scans using a dedicated software. Afterwards they were randomised according to a parallel group study design into two arms: computer-guided implant placement aided with templates (computer-guided group) versus conventional implant placement without templates (conventional group) in three different centres. Implants were to be placed flapless and loaded immediately; if inserted with a torque over 35 Ncm with reinforced provisional prostheses, then replaced, after 4 months, by definitive prostheses. Outcome measures, assessed by masked assessors were: prosthesis and implant failures, complications, peri-implant bone level changes, number of treatment sessions, duration of treatment, post-surgical pain and swelling, consumption of pain killers, treatment time, time required to solve complications, additional treatment cost, patient satisfaction. Patients were followed up to 1 year after loading.. Twenty-six patients were randomised to the conventional treatment and 25 to computerguided rehabilitation. No patient dropped out. One provisional prosthesis failed, since one of the two supporting implants failed 11 days after implantation in the conventional group (P = 1.0). Four patients of the conventionally loaded groups experienced one complication each, versus five patients (6 complications) in the computer-guided group (P = 0.726). There were no statistically significant differences between the two groups for any of the tested outcomes with the exception of more postoperative surgical pain (P = 0.002) and swelling (P = 0.024) at conventionally treated patients.. When treatment planning was made on 3D CBTC scan using a dedicated software, no statistically significant differences were observed between computer-guided and a free-hand rehabilitations, with the exception of more postoperative pain and swelling at sites treated freehand because more frequently flaps were elevated.

Topics: Adult; Aged; Aged, 80 and over; Analgesics; Cone-Beam Computed Tomography; Dental Implantation, Endosseous; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Edema; Female; Follow-Up Studies; Humans; Imaging, Three-Dimensional; Immediate Dental Implant Loading; Jaw, Edentulous, Partially; Male; Middle Aged; Mouth, Edentulous; Operative Time; Pain, Postoperative; Patient Care Planning; Patient Satisfaction; Postoperative Complications; Surgery, Computer-Assisted; Surgical Flaps; Torque; Treatment Outcome

To evaluate the outcome of 2 versus 4 implants placed flapless in fully edentulous mandibles and immediately restored with metal-resin screw-retained cross-arch prostheses.. Sixty patients from two different centres were randomised: 30 to the allon- 2 group and 30 to the all-on-4 group according to a parallel group design. To be immediately loaded, implants had to be inserted with a minimum torque of 40 Ncm. Outcome measures were prosthesis and implant failures, complications, and marginal bone level changes.. Flaps were raised in 18 patients. A total of 2 implants in 2 patients did not reach the planned insertion torque and were immediately replaced by larger diameter ones. One year after loading, no drop-out or implant failure occurred. Eight biomechanical complications occurred in the all-on-2 group versus 8 complications in the all-on-4 group. There were no statistically significant differences for complications between groups. There were no statistically significant differences for marginal peri-implant bone levels between the two groups (estimate of the difference = -0.16; 95%CI -0.40 to 0.08; P (ANCOVA) = 0.074), with both groups losing a statistically significant amount of marginal bone (0.74 mm for all-on-2 implants and 0.58 mm for all-on-4 implants). There were statistically significant differences between the two centres, with more bone being lost for the Bologna centre (0.26 mm versus 1.07 mm).. These preliminary results, up to 1 year after loading, suggest that immediately loaded mandibular cross-arch fixed prostheses can be supported by only 2 dental implants. Longer followups (approximately 10 years) are needed to properly evaluate this therapeutic option.

Topics: Adult; Aged; Aged, 80 and over; Alveolar Bone Loss; Biomechanical Phenomena; Dental Alloys; Dental Implant-Abutment Design; Dental Implants; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Denture Design; Denture Repair; Denture Retention; Denture, Complete, Lower; Female; Follow-Up Studies; Humans; Immediate Dental Implant Loading; Jaw, Edentulous; Male; Mandible; Middle Aged; Pilot Projects; Postoperative Complications; Surgical Flaps; Tooth, Artificial; Torque; Treatment Outcome

To conduct a randomised controlled trial to evaluate the short-term clinical and radiographic efficacy of the NobelActive™ system and to evaluate the relative importance of achieving primary stability at placement.. A total of 32 subjects were recruited and, using a split-mouth design, the NobelActive(TM) implant was compared with a contralaterally matched Brånemark implant. Both implants were placed in a single surgical procedure into healed sites using a one-stage protocol and reviewed at monthly intervals. NobelActive(TM) implants were functionally loaded with provisional restorations at 1 month and all implants were restored with final crowns 3 months post-implant placement. The implant was assessed using peak insertion torque values, resonance frequency analysis (RFA), clinical parameters, digital subtraction radiography, and cone beam computed tomography.. The insertion torque was significantly greater for the NobelActive(TM) implant group (P = 0.02), although no observable difference in RFA values were found. Preliminary results of 6 months follow-up suggest comparable clinical and radiographic healing responses between the test and control implants. Within the limits of the sample population, the survival rates were lower with the test implants, although this difference was not statistically significant.. The NobelActive(TM) implant system requires higher insertion torques and can also achieve greater primary stability compared with a control implant system. Short-term survival and marginal bone levels of NobelActive(TM) and control implants are comparable, although the NobelActive(TM) implant system appeared to be more technique-sensitive.

Topics: Bone Density; Cone-Beam Computed Tomography; Crowns; Dental Implants; Dental Prosthesis Design; Female; Humans; Immediate Dental Implant Loading; Jaw, Edentulous, Partially; Male; Mandible; Middle Aged; Postoperative Complications; Prospective Studies; Radiography, Dental, Digital; Torque; Treatment Outcome

The purpose of this study was to compare the tibial rotational stability of anatomical double-bundle anterior cruciate ligament reconstructed knees with single-bundle anterior cruciate ligament reconstructed knees during a high-demand activity. Total of 66 subjects, (22 with double-bundle anterior cruciate ligament reconstruction, 22 with single-bundle anterior cruciate ligament reconstruction, and 22 healthy control individuals) were examined in this study. Using a 9-camera motion analysis system, motion subjects were recorded performing during a drop landing and cutting. Using the point cluster technique, the internal-external tibial rotation of both knees was calculated. The mean maximum range of motion for each knee was evaluated for 3 groups (double-bundle group, single-bundle group, and control group). Clinical assessment, including Tegner score, Lysholm score, and knee arthrometric measurement, revealed restoration of the reconstructed knee stability with no differences between the two anterior cruciate ligament reconstruction groups. The results showed that both groups resulted in tibial rotation values that were significantly smaller than those in the intact legs and those in the healthy controls. There were no significant differences in tibial rotation between the DB group and the SB group. Therefore anatomical double-bundle reconstruction restores normal tibial rotation no more than single-bundle reconstruction during this high-demand dynamic activity. These results suggest a trend towards dynamic overcorrection after the ACL reconstruction.

Topics: Anterior Cruciate Ligament Reconstruction; Exercise Test; Female; Humans; Joint Instability; Male; Movement; Muscle Contraction; Muscle Strength; Muscle Strength Dynamometer; Postoperative Complications; Tibia; Torque; Young Adult

To compare the effectiveness of immediate post-extractive single implants with delayed implants placed in preserved sockets after 4 months of healing. Implants that achieved an insertion torque of at least 35 Ncm were immediately non-occlusally loaded.. Just after tooth extraction and in the presence of a loss of the buccal plate bone less than 4 mm, compared to the palatal wall, 106 patients requiring a single immediate postextractive implant in the maxilla from second premolar to second premolar were randomly allocated to immediate implant placement (immediate group; 54 patients) or to socket preservation using anorganic bovine bone covered by a resorbable collagen barrier (delayed group; 52 patients) according to a parallel group design at three different centres. Bone-to-implant gaps were to be filled with anorganic bovine bone, however this was not done in 17 patients (corresponding to 40% of those who should have been grafted). Four months after socket preservation, delayed implants were placed. Implants placed with an insertion torque >35 Ncm were immediately loaded with non-occluding provisional single crowns, replaced, after 4 months, by definitive crowns. Outcome measures were implant failures, complications, aesthetics assessed using the pink esthetic score (PES), and patient satisfaction, recorded by blinded assessors. All patients were followed up to 4 months after loading.. Nineteen (35%) implants were not immediately loaded in the immediate group versus 39 (75%) implants in the delayed placement group because an insertion torque >35 Ncm could not be obtained. No patient dropped out. Two implants failed in the immediate group (4%) versus none in the delayed group. More minor complications occurred in the immediate group (8) than the in the delayed group (1) and this was statistically significant (P = 0.032). At delivery of definitive crowns, 4 months after loading, aesthetics were scored as 12.8 and 12.6 in the immediate and delayed groups, respectively. There was no statistically significant difference (P = 0.5). Patients of both groups were equally satisfied.. There were more complications at immediate post-extractive implants when compared to delayed implants. The aesthetic outcome appears to be similar for both groups and it seems more difficult to obtain a high insertion torque in sockets preserved with anorganic bovine bone.

Topics: Absorbable Implants; Adult; Aged; Alveolar Ridge Augmentation; Bone Matrix; Bone Substitutes; Collagen; Crowns; Dental Implantation, Endosseous; Dental Implants, Single-Tooth; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Esthetics, Dental; Female; Follow-Up Studies; Humans; Immediate Dental Implant Loading; Male; Maxilla; Membranes, Artificial; Middle Aged; Minerals; Patient Satisfaction; Postoperative Complications; Tooth Extraction; Tooth Socket; Torque; Treatment Outcome

To compare immediate versus early (6 weeks) non-occlusal loading of dental implants placed flapless in partially edentulous patients 1 year after loading.. Sixty patients were randomised: 30 to the immediately loaded group and 30 to the early loaded group. In order to be immediately loaded, implants were inserted with a minimum torque of > or = 40Ncm. Implants were fully occlusally loaded after 6 months. Outcome measures were prosthesis and implant failures, and biological and biomechanical complications.. Five implants in five patients randomised to the immediately loaded group did not reach the required primary implant stability. Three of these implants (two prostheses) were not immediately loaded. Two patients who were randomised to the early loaded group were immediately loaded erroneously. Implants in five patients of the early loaded group were conventionally loaded. No patient dropped out and there were no failures. Two complications occurred in the early and one in the immediately loaded group (no statistically significant difference), but were solved.. The use of a flapless technique for placing dental implants in conjunction with non-occlusal immediate or early loading in selected patients can provide excellent clinical results. No differences were observed when comparing implants that were loaded immediately or early. Therefore, when a high primary implant stability is obtained, it might be preferable to load the implants immediately rather than waiting for a few weeks.

Topics: Adult; Aged; Biomechanical Phenomena; Bone Density; Crowns; Dental Abutments; Dental Implantation, Endosseous; Dental Implants; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Restoration, Temporary; Female; Follow-Up Studies; Humans; Jaw, Edentulous, Partially; Male; Middle Aged; Osseointegration; Postoperative Complications; Tooth Socket; Torque; Treatment Outcome; Young Adult

To evaluate the efficacy of 7-mm-long flapless placed single implants immediately or early loaded at 6 weeks.. Thirty patients received two single Nanotite External Hex Biomet 3i implants that were then randomised for immediate or early loading. All implants had to be inserted with a minimum torque >40Ncm. Provisional crowns were put in slight occlusal contact and replaced by definitive crowns 3 months after loading. Outcome measures were implant failures, biological and biomechanical complications, peri-implant marginal bone level changes and patient preference.. Twenty-nine implants were immediately loaded and 31 early loaded. Thirteen flaps had to be elevated in 12 patients. Eleven implants in ten patients did not reach the planned insertion torque. Eight implants in seven patients were immediately replaced by implants with a larger diameter, two were loaded anyway, and one implant that was randomised to immediate loading was early loaded instead. Nine months after loading, no drop-out occurred. One implant failed in each group. There were no statistically significant differences between groups for implant losses, complications, mean marginal bone level changes, and patient preferences.. Flapless placed 7-mm-long single implants can be successfully loaded the day of insertion. Longer follow-ups are needed to monitor the long-term prognosis of short implants.

Topics: Adolescent; Adult; Alveolar Bone Loss; Biomechanical Phenomena; Bone Density; Crowns; Dental Abutments; Dental Implantation, Endosseous; Dental Implants, Single-Tooth; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Esthetics, Dental; Female; Follow-Up Studies; Humans; Jaw, Edentulous, Partially; Male; Middle Aged; Patient Preference; Periodontitis; Postoperative Complications; Surgical Flaps; Tooth Socket; Torque; Treatment Outcome; Young Adult

To evaluate the efficacy of immediate loading versus early loading at 6 weeks of bar-retained mandibular overdentures supported by two implants placed with a flapless technique.. Sixty patients were randomised: 30 to the immediately loaded group and 30 to the early loaded group. To be immediately loaded, implants had to be inserted with a minimum torque > 48 Ncm. Outcome measures were prosthesis and implant failures, biological and biomechanical complications, patient satisfaction, and Implant Stability Quotient (ISQ) assessed with a resonance frequency analysis instrument.. Sixty implants were placed in each group. Flaps had to be raised in nine patients to check drill direction or to better visualise the area after multiple teeth extraction. Two implants in two patients did not reach the planned insertion torque and were immediately replaced by larger diameters ones. After 1 year no drop out occurred and two early loaded implants failed in two patients. There were no statistically significant differences between groups for prosthesis failures, implant losses, complications, and mean ISQ values; however, patients in the immediately loaded group were significantly more satisfied than those loaded early. When comparing mean ISQ values taken 6 weeks after placement with 1-year data within each group, values decreased significantly.. Mandibular overdentures can be successfully loaded the same day of implant placement with a minimally invasive surgery, increasing patient satisfaction while decreasing treatment time and patient discomfort. No apparent advantages were seen when loading the overdentures at 6 weeks.

Topics: Adult; Aged; Aged, 80 and over; Biomechanical Phenomena; Dental Abutments; Dental Implantation, Endosseous; Dental Implants; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Denture Design; Denture Retention; Denture, Complete, Lower; Denture, Overlay; Female; Follow-Up Studies; Humans; Male; Mandible; Middle Aged; Minimally Invasive Surgical Procedures; Oral Ulcer; Osseointegration; Patient Satisfaction; Postoperative Complications; Single-Blind Method; Torque; Treatment Outcome

We compared a group of 20 patients who had 24 minimally invasive total knee arthroplasties with a similar group of 21 patients who had 25 standard medial parapatellar approach total knee arthroplasties. We wanted to clarify whether the minimally invasive group had an advantage over the standard group in muscle strength, pain level, postoperative recovery, and clinical results and whether the patients were prone to radiographically poor results, more operative time, and increased complications. The extensor and flexor torque, visual analog scale, pace of rehabilitation, Knee Society scores, radiographic findings, operative time, and complications of each group were examined. The minimally invasive group showed higher extensor torque values, higher ratios of postoperative to preoperative extensor torque, and lower average visual analog scale scores at 1 and 2 weeks. The patients in this group achieved straight leg raising, 90[degrees] knee flexion, and T-cane gait earlier. There was no component malalignment, but the tibial component shifted to a more medial position. The mean operative time was 56 minutes longer in the minimally invasive group. We encountered no major perioperative complications in either group. We believe the minimally invasive technique positively contributes to the early restoration of quadriceps strength and a speedy return to normal function.

Topics: Aged; Aged, 80 and over; Arthroplasty, Replacement, Knee; Female; Humans; Isometric Contraction; Knee Joint; Male; Middle Aged; Minimally Invasive Surgical Procedures; Muscle Strength; Muscle, Skeletal; Patella; Postoperative Complications; Recovery of Function; Time Factors; Torque; Treatment Outcome

The aim of our prospective, randomized, clinical study was to compare two postoperative regimens after Achilles rupture repair and determine whether early functional treatment will give a better result than early immobilization in tension of the musculotendinous unit.. Fifty patients with acute Achilles tendon rupture were randomized postoperatively to receive either early movement of the ankle between neutral and plantar flexion in a brace for 6 weeks or Achilles tendon immobilization in tension using a below-knee cast with the ankle in a neutral position for 6 weeks. Full weight bearing was allowed after 3 weeks in both groups. The patients were assessed clinically at 1, 3, 6, 12, and 24 weeks, and the last control visit took place at a mean of 60 (SD 6.4) weeks postoperatively.. The isokinetic calf muscle strength scores were excellent in 56%, good in 32%, fair in 8%, and poor in 4% of the patients in the early motion group at the last control checkup; whereas the scores in the cast group were excellent in 29%, good in 50%, and fair in 21% of the patients. The ankle performance scores were excellent or good in 88%, fair in 4%, and poor in 8% of the patients in the early motion group, whereas the scores in the cast group were excellent or good in 92% and fair in 8% of the patients. At 3 months and at the last control checkup, no significant differences were seen between the two groups with regard to pain, stiffness, subjective calf muscle weakness, footwear restrictions, range of ankle motion, isokinetic calf muscle strength, or overall outcome. The complications included one rerupture in the early motion group and one deep infection and two reruptures in the cast group. Deep infection and the rerupture in the cast group occurred in the same patient. The outcome of the complications was good in two cases and poor in one.. The isokinetic calf muscle strength results were somewhat better in the early motion group, whereas the other outcome results obtained in the two groups of patients were very similar. We recommend early functional postoperative treatment after Achilles rupture repair for athletes and well-motivated patients and for less-motivated patients and nonathletes.

Topics: Achilles Tendon; Adult; Ankle; Casts, Surgical; Female; Humans; Immobilization; Isometric Contraction; Male; Middle Aged; Muscle, Skeletal; Pain Measurement; Patient Satisfaction; Physical Therapy Modalities; Postoperative Care; Postoperative Complications; Prospective Studies; Range of Motion, Articular; Recovery of Function; Rupture; Tendon Injuries; Torque; Treatment Outcome

The aim of this study was to describe the contrast-enhanced magnetic resonance imaging (MRI) appearance of bone tunnel enlargement detected on radiography after anterior cruciate ligament (ACL) reconstruction with semitendinosus and gracilis tendon endobutton (STG-endobutton) fixation technique. Fourteen patients with a STG-endobutton ACL reconstruction were examined 3 months (n = 1), 1 year (n = 1) and 2 years (n = 12) postoperatively. An age- and sex-matched group with a bone-patellar tendon-bone (BTB) autograft ACL reconstruction with similar follow-up was taken as control. Data on clinical examination, laxity and isokinetic muscle torque measurements, anteroposterior and lateral view radiography were obtained, and knee scores (Lysholm and Tegner) were collected. Contrast-enhanced MRI was performed in the STG-endobutton group with a 1.5-T imager. There were no statistical differences between the groups with respect to clinical findings, stability tests, or knee scores. In the STG-endobutton group the average femoral and tibial bone tunnel diameter detected on anteroposterior view radiography had increased at 2-year follow-up by 33% and 23%, respectively. On MRI the ligamentous graft itself was not enhanced by the contrast medium whereas periligamentous tissue within and around the STG graft bundles showed mild contrast enhancement. In conclusion, the MRI results suggest that enhancing periligamentous tissue accumulated in and around the STG graft associated with the tunnel expansion. In spite of the significant bone tunnel enlargement observed on the follow-up radiography the STG-endobutton knees were stable and the patients satisfied.

Topics: Adult; Anterior Cruciate Ligament; Anterior Cruciate Ligament Injuries; Case-Control Studies; Contrast Media; Female; Femur; Follow-Up Studies; Humans; Internal Fixators; Joint Instability; Knee Injuries; Knee Joint; Magnetic Resonance Imaging; Male; Muscle Contraction; Patellar Ligament; Patient Satisfaction; Postoperative Complications; Prospective Studies; Radiography; Range of Motion, Articular; Tendons; Tibia; Torque; Transplantation, Autologous

Posterior stabilization is a common surgical procedure, which aims for rigid stabilization by facet fusion. Facet non-union has a potential risk of the screw loosening and malalignment. Although some authors have reported the influencing factors about screw loosening in the lumbar spine, there are few reports about the risk factor contributing to the facet non-union in the cervical spine. In all, 22 patients (78 facets and 122 screws) with degenerative cervical kyphosis or spondylolisthesis who underwent decompression and lateral mass screw (LMS) fixation were analyzed. Age, gender, smoking, bone mineral density (BMD), the degree of facet decortication with bone packing, and screw loosening were investigated as risk factors contributing to the facet non-union at each segmental fused level. Facet fusion rate was 85.9% (67/78 facets) and the incidence of loosening was 4.9% (6/122 screws, 4 patients). Insufficient facet decortication with bone packing is a significant risk factor of facet non-union (p <0.05, odds ratio: 26.5). All six loosened screws were associated with bony non-union of the facet and were located in the uppermost or lowermost vertebrae. Comparing loosened screws and stable screws, the average maximal insertional screw torque (MIT) was 9.8 cNm and 39.5 cNm, respectively (p <0.05). Additionally, the length of the stable screws was significantly longer versus the loosened screws (p <0.05). Lower MIT and shorter screw length located near the ends of the lateral mass may predict loosening, which can lead to facet non-union. Sufficient facet decortication with bone packing is one of the important factors contributing to the facet fusion.

Topics: Aged; Aged, 80 and over; Bone Density; Bone Screws; Bone-Implant Interface; Cervical Vertebrae; Female; Humans; Incidence; Japan; Male; Middle Aged; Postoperative Complications; Retrospective Studies; Risk Factors; Spinal Fusion; Spondylolisthesis; Time Factors; Tomography, X-Ray Computed; Torque; Zygapophyseal Joint

Persistent neuromuscular deficits in the surgical limb after anterior cruciate ligament reconstruction (ACLR) have been repeatedly described in the literature, yet little is known regarding their association with physical performance and patient-reported function.. To describe (1) interlimb differences in neuromuscular and functional outcomes and (2) the associations of neuromuscular outcomes with measures of physical and knee-related patient-reported function.. Cross-sectional study.. Laboratory.. Thirty individuals after primary, unilateral ACLR (19 males; age = 21.5 years [range, 14-41 years]; 8 months [range = 6-23 months] postsurgery).. Knee-extensor isometric and isokinetic peak torque was measured with an isokinetic dynamometer. Cross-sectional area (CSA) was measured bilaterally for each of the quadriceps muscles via magnetic resonance imaging. We measured quadriceps central activation bilaterally via the superimposed-burst technique. Physical performance (single-legged hop tests, step length via spatiotemporal gait analysis) and patient-reported outcomes (International Knee Documentation Committee questionnaire and Knee Injury and Osteoarthritis Outcome Score Sport and Recreation subscale) were also recorded. We conducted Wilcoxon signed rank tests to identify interlimb differences. Spearman ρ correlation analyses revealed associations between limb symmetry and neuromuscular and functional outcomes, as well as with patient-reported function.. Deficits in the surgical limb as compared with the nonsurgical limb were present for all outcomes (. Although deficits were observed in the surgical limb for all neuromuscular measures, greater symmetry in the size and strength of the quadriceps, rather than activation, was more strongly associated with physical performance after ACLR. Greater symmetry in strength was also more strongly associated with patient-reported function.

Topics: Adolescent; Adult; Anterior Cruciate Ligament Injuries; Anterior Cruciate Ligament Reconstruction; Athletic Injuries; Cross-Sectional Studies; Exercise Test; Female; Gait Analysis; Humans; Knee Injuries; Knee Joint; Male; Muscle Strength; Patient Reported Outcome Measures; Postoperative Complications; Quadriceps Muscle; Torque; Young Adult

The purpose of this study was to evaluate and compare knee kinematics and kinetics following either single bundle, modified triangular or double-bundle reconstruction of the superficial medial collateral ligament (sMCL) with single bundle anatomic ACL reconstruction.. Using a cadaveric model (n = 10), the knee kinematics and kinetics following three MCL reconstructions (single-bundle (SB), double-bundle (DB), modified triangular) with single bundle anatomic ACL reconstruction were compared with the intact and deficient knee state. The knees were tested under (1) an 89-N anterior tibial load, (2) 5 N-m internal and external rotational tibial torques, and (3) a 7 N-m valgus torque.. Anatomic ACL reconstruction with SB MCL reconstruction was able to restore anterior tibial translation and external rotation to intact knee values but failed to the internal and valgus rotatory stability. Anatomical DB MCL reconstruction (with SB ACL reconstruction) and the modified triangular MCL reconstruction (with SB ACL reconstruction) restored all knee kinematics to the intact value.. This study shows that clinical presentation with combined ACL and severe sMCL injury, single-bundle MCL with single-bundle ACL reconstruction does not restore knee kinematics. Anatomical double-bundle MCL reconstruction may produce slightly better biomechanical stability than the modified triangular MCL reconstruction, but the modified triangular reconstruction might be more clinically practical with the advantages of being less invasive and technically simpler while at the same time can restore a nearly normal knee joint.

Topics: Anterior Cruciate Ligament Injuries; Anterior Cruciate Ligament Reconstruction; Biomechanical Phenomena; Cadaver; Humans; Joint Instability; Kinetics; Knee; Medial Collateral Ligament, Knee; Middle Aged; Postoperative Complications; Rotation; Tibia; Torque

Periprosthetic fracture is a leading reason for readmission following total hip arthroplasty. Most of these fractures occur during the early postoperative period before bone ingrowth. Before ingrowth occurs, the femoral component can rotate relative to the femoral canal, causing a spiral fracture pattern. We sought to evaluate, in a paired cadaver model, whether the torsional load to fracture was higher in collared stems. The hypothesis was that collared stems have greater load to fracture under axial and torsional loads compared with collarless stems.. Twenty-two cadaveric femora (11 matched pairs) with a mean age of 77 ± 10.2 years (range, 54 to 90 years) were harvested. Following dissection, the femora were evaluated with use of a dual x-ray absorptiometry scanner and T scores were recorded. We utilized a common stem that is available with the same intraosseous geometry with and without a collar. For each pair, 1 femur was implanted with a collared stem and the contralateral femur was implanted with a collarless stem with use of a standard broaching technique. A compressive 68-kg load was applied to simulate body weight during ambulation. A rotational displacement was then applied until fracture occurred. Peak torque prior to fracture was measured with use of a torque meter load cell and data acquisition software.. The median torque to fracture was 65.4 Nm for collared stems and 43.1 Nm for uncollared stems (p = 0.0014, Wilcoxon signed-rank test). The median T score was -1.95 (range, -4.1 to -0.15). The median difference in torque to fracture was 29.18 Nm. As expected in each case, the mode of failure was a spiral fracture around the implant.. Collared stems seemed to offer a protective effect in torsional loading in this biomechanical model comparing matched femora.. These results may translate into a protective effect against early periprosthetic Vancouver B2 femoral fractures that occur before osseous integration has occurred.

Topics: Aged; Aged, 80 and over; Arthroplasty, Replacement, Hip; Biomechanical Phenomena; Female; Femoral Fractures; Hip Prosthesis; Humans; Male; Middle Aged; Periprosthetic Fractures; Postoperative Complications; Torque

Quadriceps weakness is common after anterior cruciate ligament reconstruction (ACLR). Limited neuromuscular activation may have a role in the weakness. The purpose of this study was to use peripheral magnetic stimulation to measure changes in quadriceps inhibition in patients during rehabilitation from ACLR.. Ten patients (7M/3F; age 35 ± 8 years; BMI 26.0 ± 4.8 kg/m. Patients had marked deficits in MVIC, with improvement from 3 to 6 months that was more apparent at 65° versus 30° (P < 0.05). There was significant deficit in stimulation-evoked torque on the involved side that diminished over time, and this change occurred differently between the two angles (P < 0.05). Central activation ratio was lower on the involved side versus the noninvolved side and this effect was more prominent at 3 versus 6 months: combining the angles, mean central activation ratio on the involved and noninvolved sides, respectively, was 91.4 ± 7.6% and 97.5 ± 5.3% at 3 months, and 93.0 ± 7.8% and 95.8 ± 6.8% at 6 months.. At 3 and 6 months after ACLR, there were significant deficits in quadriceps strength and activation. Quadriceps activation levels were high (> 90%) for both sides at both time points. The substantial strength deficits at this postoperative period may be largely due to muscle atrophy with limited contribution from central inhibition. Rehabilitation interventions to normalize quadriceps strength should emphasize hypertrophic stimuli as opposed to neuromuscular activation strategies.. II, prospective cohort study.

Topics: Adult; Anterior Cruciate Ligament Injuries; Anterior Cruciate Ligament Reconstruction; Female; Humans; Isometric Contraction; Male; Middle Aged; Muscular Atrophy; Postoperative Complications; Prospective Studies; Quadriceps Muscle; Torque

The aim of this study was to evaluate the effects of knee biomechanics with an irreparable lateral meniscus defect using the centralization capsular meniscus support procedure in the setting of the ACL-reconstructed knee in a porcine model. The hypothesis is the arthroscopic centralization will decrease the laxity and rotation of the ACL-reconstructed knee.. Twelve fresh-frozen porcine knees were tested using a robotic testing system under the following loading conditions: (a) an 89.0 N anterior tibial load; (b) 4.0 N m internal and external rotational torques. Anatomic single-bundle ACL reconstruction with a 7 mm-diameter bovine extensor tendon graft was performed. A massive, middle segment, lateral meniscus defect was created via arthroscopy, and arthroscopic centralization was performed with a 1.4 mm anchor with a #2 suture. The LM states with ACL reconstruction evaluated were: intact, massive middle segment defect and with the lateral meniscus centralization procedure.. The rotation of the ACL reconstructed knee with the lateral meniscus defect was significantly higher than with the centralized lateral meniscus under an external rotational torque at 30° of knee flexion, and under an internal rotational torque at 30° and 45° of knee flexion. There were no systematic and consistent effects of LM centralization under anterior tibial translation.. In this porcine model, the capsular support of middle segment of the lateral meniscus using arthroscopic centralization improved the residual rotational laxity of the ACL-reconstructed knee accompanied with lateral meniscus dysfunction due to massive meniscus defect. This study quantifies the benefit to knee kinematics of arthroscopic centralization by restoring the lateral meniscal function.

Topics: Animals; Anterior Cruciate Ligament Injuries; Anterior Cruciate Ligament Reconstruction; Arthroscopy; Biomechanical Phenomena; Cattle; Humans; Joint Instability; Menisci, Tibial; Models, Animal; Postoperative Complications; Range of Motion, Articular; Rotation; Swine; Tendons; Tibia; Torque

To compare knee isokinetic performance six months after reconstruction of the anterior cruciate ligament using grafts from either the patellar tendon or the hamstrings among patients who underwent the same rehabilitation protocol.. Thirty-four patients were evaluated (17 with grafts from the patellar tendon and 17 with grafts from the hamstrings). Operated and non-operated knees were compared with regards to the variables of peak torque, work and the hamstring/quadriceps relationship at velocities of 60º/s and 180º/s and power of 180º/s after six months of surgery.. The patients with ACL reconstruction using the patellar tendon (BPTB) showed quadriceps deficits for all variables, but the flexor musculature was balanced. In the hamstring group, both the extensors and the flexors showed deficits for the variables analyzed, except for hamstring power at 180º/s.. Patients in the patellar tendon group had a greater quadriceps deficit compared with those in the hamstrings group. Patients in the hamstrings group had a greater muscular deficit in the flexor mechanism compared with the contralateral knee. An unbalanced H/Q ratio was observed regardless of graft type, but this was more evident in the BPTB group.

Topics: Adult; Anterior Cruciate Ligament; Anterior Cruciate Ligament Injuries; Anterior Cruciate Ligament Reconstruction; Female; Humans; Knee; Knee Joint; Male; Middle Aged; Muscle Strength; Muscle, Skeletal; Postoperative Complications; Quadriceps Muscle; Tendons; Torque; Treatment Outcome; Young Adult

The individual kinematic roles of the anterolateral ligament (ALL) and the distal iliotibial band Kaplan fibers in the setting of anterior cruciate ligament (ACL) deficiency require further clarification. This will improve understanding of their potential contribution to residual anterolateral rotational laxity after ACL reconstruction and may influence selection of an anterolateral extra-articular reconstruction technique, which is currently a matter of debate. Hypothesis/Purpose: To compare the role of the ALL and the Kaplan fibers in stabilizing the knee against tibial internal rotation, anterior tibial translation, and the pivot shift in ACL-deficient knees. We hypothesized that the Kaplan fibers would provide greater tibial internal rotation restraint than the ALL in ACL-deficient knees and that both structures would provide restraint against internal rotation during a simulated pivot-shift test.. Controlled laboratory study.. Ten paired fresh-frozen cadaveric knees (n = 20) were used to investigate the effect of sectioning the ALL and the Kaplan fibers in ACL-deficient knees with a 6 degrees of freedom robotic testing system. After ACL sectioning, sectioning was randomly performed for the ALL and the Kaplan fibers. An established robotic testing protocol was utilized to assess knee kinematics when the specimens were subjected to a 5-N·m internal rotation torque (0°-90° at 15° increments), a simulated pivot shift with 10-N·m valgus and 5-N·m internal rotation torque (15° and 30°), and an 88-N anterior tibial load (30° and 90°).. Sectioning of the ACL led to significantly increased tibial internal rotation (from 0° to 90°) and anterior tibial translation (30° and 90°) as compared with the intact state. Significantly increased internal rotation occurred with further sectioning of the ALL (15°-90°) and Kaplan fibers (15°, 60°-90°). At higher flexion angles (60°-90°), sectioning the Kaplan fibers led to significantly greater internal rotation when compared with ALL sectioning. On simulated pivot-shift testing, ALL sectioning led to significantly increased internal rotation and anterior translation at 15° and 30°; sectioning of the Kaplan fibers led to significantly increased tibial internal rotation at 15° and 30° and anterior translation at 15°. No significant difference was found when anterior tibial translation was compared between the ACL/ALL- and ACL/Kaplan fiber-deficient states on simulated pivot-shift testing or isolated anterior tibial load.. The ALL and Kaplan fibers restrain internal rotation in the ACL-deficient knee. Sectioning the Kaplan fibers led to greater tibial internal rotation at higher flexion angles (60°-90°) as compared with ALL sectioning. Additionally, the ALL and Kaplan fibers contribute to restraint of the pivot shift and anterior tibial translation in the ACL-deficient knee.. This study reports that the ALL and distal iliotibial band Kaplan fibers restrain anterior tibial translation, internal rotation, and pivot shift in the ACL-deficient knee. Furthermore, sectioning the Kaplan fibers led to significantly greater tibial internal rotation when compared with ALL sectioning at high flexion angles. These results demonstrate increased rotational knee laxity with combined ACL and anterolateral extra-articular knee injuries and may allow surgeons to optimize the care of patients with this injury pattern.

Topics: Anterior Cruciate Ligament Injuries; Anterior Cruciate Ligament Reconstruction; Biomechanical Phenomena; Cadaver; Fascia Lata; Humans; Joint Instability; Ligaments, Articular; Male; Middle Aged; Physical Examination; Postoperative Complications; Range of Motion, Articular; Robotics; Rotation; Torque

The aim of this study was to quantify the contributions of medial soft tissues to stability following cruciate-retaining (CR) or posterior-stabilised (PS) total knee arthroplasty (TKA).. Using a robotic system, eight cadaveric knees were subjected to ±90-N anterior-posterior force, ±5-Nm internal-external and ±8-Nm varus-valgus torques at various flexion angles. The knees were tested intact and then with CR and PS implants, and successive cuts of the deep and superficial medial collateral ligaments (dMCL, sMCL) and posteromedial capsule (PMC) quantified the percentage contributions of each structure to restraining the applied loads.. In implanted knees, the sMCL restrained valgus rotation (62 % across flexion angles), anterior-posterior drawer (24 and 10 %, respectively) and internal-external rotation (22 and 37 %). Changing from CR TKA to PS TKA increased the load on the sMCL when resisting valgus loads. The dMCL restrained 11 % of external and 13 % of valgus rotations, and the PMC was significant at low flexion angles.. This work has shown that medial release in the varus knee should be minimised, as it may inadvertently result in a combined laxity pattern. There is increasing interest in preserving constitutional varus in TKA, and this work argues for preservation of the sMCL to afford the surgeon consistent restraint and maintain a balanced knee for the patient.

Topics: Aged; Aged, 80 and over; Arthroplasty, Replacement, Knee; Cadaver; Female; Humans; Joint Instability; Knee Joint; Knee Prosthesis; Male; Medial Collateral Ligament, Knee; Middle Aged; Postoperative Complications; Range of Motion, Articular; Rotation; Torque

To evaluate the clinical outcome of fully edentulous patients rehabilitated with immediately loaded bimaxillary screw-retained metal-resin prostheses supported by five implants placed flapless: two in the mandible and three in the maxillae.. Twenty-five consecutively treated patients were recruited. To be immediately loaded, implants had to be inserted with a minimum torque of 80 Ncm. Outcome measures were prosthesis and implant failures, and complications.. Six months after loading no patients dropped out and no prosthesis or implant failed. Two maxillary prostheses were loaded early at 8 weeks because implants were inserted with a torque inferior to 45 Ncm. Three complications occurred in two patients but they were all successfully treated.. Six months after loading, immediately loaded bimaxillary cross-arch prostheses can be supported by only two mandibular and three maxillary flapless-placed dental implants. Longer follow-ups of approximately 10 years are needed to understand the prognosis of this treatment modality.

Topics: Adult; Aged; Bone Density; Cohort Studies; Dental Implantation, Endosseous; Dental Implants; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Denture Design; Denture Retention; Denture, Complete, Immediate; Female; Follow-Up Studies; Humans; Immediate Dental Implant Loading; Intraoperative Complications; Male; Middle Aged; Mouth, Edentulous; Postoperative Complications; Prospective Studies; Surface Properties; Torque; Treatment Outcome

Return to activity in the presence of quadriceps dysfunction may predispose individuals with anterior cruciate ligament reconstruction (ACLR) to long-term joint degeneration. Asymmetry may manifest during movement and result in altered knee-joint-loading patterns; however, the underlying neurophysiologic mechanisms remain unclear.. To compare limb symmetry of quadriceps neuromuscular function between participants with ACLR and participants serving as healthy controls.. Descriptive laboratory study.. Research laboratory.. A total of 22 individuals with ACLR (12 men, 10 women) and 24 individuals serving as healthy controls (12 men, 12 women).. Normalized knee-extension maximal voluntary isometric contraction (MVIC) torque (Nm/kg), quadriceps central activation ratio (CAR) (%), quadriceps motor-neuron-pool excitability (Hoffmann reflex to motor wave ratio), and quadriceps active motor threshold (AMT) (% 2.0 T) were measured bilaterally and used to calculate limb symmetry indices for comparison between groups. We used analyses of variance to compare quadriceps Hoffmann reflex to motor wave ratio, normalized knee-extension MVIC torque, quadriceps CAR, and quadriceps AMT between groups and limbs.. The ACLR group exhibited greater asymmetry in knee-extension MVIC torque (ACLR group = 0.85 ± 0.21, healthy group = 0.97 ± 0.14; t44 = 2.26, P = .03), quadriceps CAR (ACLR group = 0.94 ± 0.11, healthy group = 1.00 ± 0.08; t44 = 2.22, P = .04), and quadriceps AMT (ACLR group = 1.13 ± 0.18, healthy group = 1.02 ± 0.11; t34 = -2.46, P = .04) than the healthy control group.. Asymmetries in measures of quadriceps function and cortical excitability were present in patients with ACLR. Asymmetry in quadriceps strength, activation, and cortical excitability persisted in individuals with ACLR beyond return to recreational activity. Measuring the magnitude of asymmetry after ACLR represents an important step in understanding long-term reductions in self-reported function and increased rate of subsequent joint injury in otherwise healthy, active individuals after ACLR.

Topics: Adolescent; Adult; Anterior Cruciate Ligament; Anterior Cruciate Ligament Injuries; Anterior Cruciate Ligament Reconstruction; Athletic Injuries; Female; Humans; Isometric Contraction; Knee Joint; Male; Muscle Weakness; Postoperative Complications; Psychomotor Performance; Quadriceps Muscle; Torque

The incidence of the patellofemoral joint chondral lesions after anterior cruciate ligament reconstruction (ACLR) is disturbingly high. Few studies have assessed the factors affecting patellofemoral joint chondral lesions postoperatively.. The recovery of quadriceps strength after ACLR could be associated with patellofemoral joint cartilage damage.. Cohort study; Level of evidence, 3.. A total of 88 patients who underwent arthroscopic anatomic double-bundle ACLR with hamstring autografts received second-look arthroscopy at the time of metal staple removal at an average of 24.1 months (range, 12-51 months) postoperatively. All patients underwent standardized isokinetic strength testing for bilateral quadriceps and hamstrings 1 to 2 days before second-look arthroscopy. The patients were divided into 2 groups: Patients in group 1 had a ≥20% deficit on the peak torque measures for quadriceps compared with that of the contralateral knee, whereas those in group 2 had a <20% deficit on peak torque. Cartilage status at the patellofemoral joint and tibiofemoral joint were evaluated by second-look arthroscopy and the Outerbridge classification. Other assessments included the International Knee Documentation Committee (IKDC) score, Tegner and Lysholm scores, side-to-side difference on KT-2000 arthrometer, and range of motion.. There were 42 patients included in group 1 and 46 patients in group 2. The mean postoperative quadriceps peak torque of the involved knee compared with the contralateral knee was 70% (range, 57%-80%) in group 1 and 95% (range, 81%-116%) in group 2. For all patients, a significant worsening was seen in the patellar and trochlear cartilage (P = .030 and <.001, respectively) but not at the medial or lateral tibiofemoral joint after ACLR. A significant worsening in the status of both patellar and trochlear cartilage was seen after ACLR in group 1 (P = .013 and =.011, respectively) and of trochlear cartilage in group 2 (P = .006). Significantly fewer severe chondral lesions of the patella were found in group 2 than in group 1 (proportion of patients whose cartilage grade worsened: 26% vs 48%, P < .05; difference in cartilage grade: 0.09 vs 0.62, P < .05). There was no significant difference for trochlear chondral worsening between the 2 groups. No significant differences were detected between the 2 groups in terms of hamstring strength; Lysholm, Tegner, and IKDC scores; KT-2000 arthrometer anterior laxity; or range of motion.. Greater than 80% recovery of quadriceps strength after ACLR is associated with less severe patellar cartilage damage at short-term follow-up.

Topics: Adolescent; Adult; Anterior Cruciate Ligament Reconstruction; Arthroscopy; Autografts; Cartilage Diseases; Cartilage, Articular; Cohort Studies; Device Removal; Exercise Therapy; Female; Humans; Knee Joint; Male; Patella; Patellofemoral Joint; Postoperative Complications; Quadriceps Muscle; Range of Motion, Articular; Recovery of Function; Second-Look Surgery; Tendons; Torque; Transplantation, Autologous; Young Adult

This study aims to investigate which intramedullary nail is biomechanically better for establishing interfragmentary rotational stability.. Thirty composite femurs were utilized in this study. We analyzed interfragmentary rotational arc displacements between 10 Nm external-6 Nm internal torques and 6 Nm external-6 Nm internal torques which imitate rotation torques while walking on a flat surface and descending stairs by administering 10 interlocking nails, 10 compression nails, and 10 Mehmet anti-rotation nails with tube compression.. Maximum interfragmentary rotation arc displacement between 10 Nm external rotation and 6 Nm internal rotation torques was mean 1.64 mm in the Mehmet nail compressed by 7 Nm torque wrench. This value was lower by 309% (6.72 mm) from interlocking nail (p=0.000), 201% (5.42 mm) from compression nail compressed by 2.5 Nm torque wrench (p=0.000), and 26% (1.92 mm) from compression nail compressed by 7 Nm torque wrench (p>0.05).. In axially stable transvers and short oblique femur fractures, Mehmet nail is superior to other intramedullary nails with limited movement between locking screw and hole, more interfragmentary compression without locking screw deformation, and no proximal nail migration.

Topics: Biomechanical Phenomena; Bone Nails; Bone Screws; Fracture Fixation, Intramedullary; Humans; Postoperative Complications; Rotation; Torque; Torsion Abnormality

To evaluate the clinical outcome of two implants placed flapless in fully edentulous mandibles and immediately restored with a metal-resin screw-retained cross-arch prostheses 3 years after loading.. Eighty consecutively patients were recruited. Implants for immediate loading had to be inserted with a minimum torque of 80 Ncm. Outcome measures, evaluated by two independent assessors, were: prosthesis and implant failures, complications, marginal bone level changes, implant stability quotient (ISQ) values and patient satisfaction.. Three years after loading, all prostheses were in function although one patient did not come back for the 1- and 3-year follow-ups. Two implants failed early in two patients, but were successfully replaced and their prostheses remade. Twelve complications occurred in 10 patients but were all successfully treated. After 3 years, mean marginal bone loss was 0.43 mm, mean ISQ values decreased from 75.4 to 75.3, and all but four patients were fully satisfied with the therapy. Four patients were partially satisfied because, lacking molars, they could not chew as they wished.. Immediately loaded mandibular cross-arch partial dentures can be supported by only two dental implants up to 3 years. Longer follow-ups (around 10 years) are needed to know the prognosis of this treatment modality.

Topics: Adult; Aged; Aged, 80 and over; Alveolar Bone Loss; Cohort Studies; Dental Implants; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Denture Design; Denture Retention; Denture, Partial, Fixed; Female; Follow-Up Studies; Humans; Immediate Dental Implant Loading; Jaw, Edentulous; Male; Mandible; Middle Aged; Osseointegration; Patient Satisfaction; Peri-Implantitis; Postoperative Complications; Prospective Studies; Torque; Treatment Outcome

The aims of this study were to evaluate a surgical/prosthetic protocol for the immediate rehabilitation of the augmented edentulous maxilla, and to compare the outcomes of implants placed in grafted (test group) versus native (control group) sites in the same patients.. Twenty patients were included in the study. Each patient was treated with a bilateral sinus augmentation procedure using a 50:50 composite graft of autogenous mandibular bone and bovine hydroxyapatite. Four to 5 months later, 155 implants (90 test and 65 control) were placed and restored with screw-retained fixed definitive prostheses supported by titanium frameworks within 1 week. All patients were followed for 1 year. Implant stability quotient (ISQ) measurements and radiographic evaluation of the marginal bone resorption (MBR) were performed.. Two test implants failed in two patients, giving a cumulative 1-year success rate of 98.7%; the prostheses success rate was 100%. Insertion torque and ISQ values for test implants were significantly lower than those for control implants (unpaired t-test, p < .0001). The mean MBR around control and test implants at the 1-year evaluation were similar (0.47 ± 0.25 mm and 0.43 ± 0.21 mm, respectively).. The combination of implants placed in sinus-grafted and native sites can be immediately loaded with a fixed full-arch prosthesis and yield short-term successful outcomes.

Topics: Animals; Bone Substitutes; Bone Transplantation; Cattle; Dental Materials; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Denture Bases; Denture Design; Denture Retention; Denture, Complete, Upper; Durapatite; Follow-Up Studies; Humans; Immediate Dental Implant Loading; Jaw, Edentulous; Maxilla; Osseointegration; Patient Satisfaction; Peri-Implantitis; Pilot Projects; Postoperative Complications; Radiography, Dental, Digital; Sinus Floor Augmentation; Titanium; Torque; Transplantation, Autologous; Treatment Outcome

It has been suggested that limited active ROM of reverse shoulder prostheses relates to lack of strength. However, the postoperative strength has not been quantified.. We therefore measured joint torques in patients with reverse shoulder prostheses and correlated torques with functional scores.. We recruited 33 patients (age, 72 ± 8 years) with a reverse prosthesis (37 shoulders, 21 primary and 16 revisions). We obtained Constant-Murley, DASH, and Simple Shoulder Test ([D]SST) scores, and performed two isokinetic protocols (abduction/adduction and external/internal rotation) at 60° per second. Minimum followup was 4 months (average, 23 months; range, 4-63 months).. Twenty-three patients (24 shoulders; 13 primaries, 11 revisions) were able to perform at least one of the defined tasks. Mean abduction and adduction torques were 15 Nm ± 7 Nm and 16 Nm ± 10 Nm (19%-78% of normal shoulders). External and internal rotation tasks could be performed by only 13 patients (14 shoulders; nine primary, five revisions) generating 9 Nm ± 4 Nm and 8 Nm ± 3 Nm, respectively (13%-71% of normal shoulders). We found moderate correlations between Constant-Murley, DASH and (D)SST (D = Dutch translation) scores and abduction and external rotation.. Patients with a reverse prosthesis had reduced strength when compared with normal values reported in the literature (only 65% of patients could perform the protocol). This effect was greatest for external rotation and might explain clinical outcomes with which a moderately strong relationship was observed. Our observations suggest limited strength is a major factor in reduced ROM.

Topics: Aged; Arthroplasty, Replacement; Disability Evaluation; Female; Humans; Joint Prosthesis; Male; Muscle Strength; Muscle Strength Dynamometer; Pilot Projects; Postoperative Complications; Prosthesis Failure; Range of Motion, Articular; Recovery of Function; Shoulder; Shoulder Joint; Torque

To evaluate the clinical outcome of 2 implants placed flapless in fully edentulous mandibles and immediately restored with a metal-resin screw-retained cross-arch prosthesis 1 year after loading.. Eighty consecutive patients were recruited. To be immediately loaded, implants had to be inserted with a minimum torque of 80 Ncm. Outcome measures, evaluated by two independent assessors, were prosthesis and implant failures, complications, marginal bone level changes, implant stability quotient (ISQ) values and patient satisfaction.. Flaps were raised in 7 patients. Twelve implants in 7 patients did not reach the planned insertion torque. Four implants in 3 patients were immediately replaced by larger diameter implants and achieved the desired torque, whereas the remaining implants were immediately loaded anyway. Two implants failed early in 2 patients, but were successfully replaced and their prostheses remade. One month after loading, 72 (90%) patients declared to be completely satisfied with the therapy, 7 (9%) partially satisfied and 1 (1%) unsatisfied. One year after loading, all prostheses were in function, though one patient did not attend the 1-year control. Eight (10%) complications occurred, all successfully treated. After 1 year, the mean marginal bone loss was 0.3 mm and mean ISQ values decreased from 75.4 to 72.4.. These short-term results at 1 year after loading suggest that immediately loaded mandibular cross-arch fixed prostheses can be supported by only 2 dental implants. Longer follow-ups (around 10 years) are needed to know the prognosis of this treatment modality.

Topics: Adult; Aged; Aged, 80 and over; Alveolar Bone Loss; Cohort Studies; Dental Implants; Dental Prosthesis Retention; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Denture Design; Denture Retention; Denture, Complete, Lower; Female; Follow-Up Studies; Humans; Immediate Dental Implant Loading; Jaw, Edentulous; Male; Mandible; Middle Aged; Osseointegration; Patient Satisfaction; Postoperative Complications; Prospective Studies; Torque; Treatment Outcome

Intramedullary (IM) nailing is currently the most common method for treating patients with impending pathologic humeral fractures; however, this treatment is associated with known complications primarily owing to violation of the rotator cuff during insertion. A better option is needed. To determine if a humeral segmental replacement prosthesis would provide a stronger construct compared with an IM nail in this setting, we compared the mechanical properties of these two devices in a cadaver model simulating an impending pathologic fracture. In each of nine matched pairs of fresh human humeri one was randomly selected to undergo a 50% lateral middiaphyseal defect simulating an impending pathologic fracture and subsequent fixation with an IM nail and bone cement. The contralateral humerus underwent fixation using a humeral segmental defect prosthesis. We determined T-scores using DEXA. Each specimen subsequently was tested in torsion to failure. Peak torque and peak rotation at failure were greater for the prosthesis specimens whereas torsional stiffness was greater for the IM nail specimens. We found a linear relationship between peak torque and T-score for each device with the slopes of the lines suggesting the construct with the prosthesis can withstand greater forces than the IM nail and the differences between devices were greater in weaker bones.

Topics: Absorptiometry, Photon; Biomechanical Phenomena; Bone Nails; Cementation; Compressive Strength; Equipment Failure Analysis; Humans; Humeral Fractures; Humerus; Internal Fixators; Postoperative Complications; Prosthesis Failure; Prosthesis Implantation; Torque

The purpose of this study was to report the management and outcome of 11 patients presenting with chronic Achilles tendon (AT) rupture treated by a modified flexor hallucis longus (FHL) transfer. Seven patients presented with a neglected AT rupture, one with a chronic AT rupture associated with Achilles tendinosis and three with an AT re-rupture. AT defect after fibrosis debridement averaged 7.4 cm. In addition to FHL transfer, we performed an augmentation using the two remaining fibrous scar stumps of the ruptured AT. Functional assessment was performed using the AOFAS score and isokinetic evaluation was performed to assess ankle plantarflexion torque deficit. Follow-up averaged 79 months. Functional outcome was excellent with a significant improvement of the AOFAS score at latest follow-up. No re-rupture nor major complication, particularly of wound healing, was observed. All patients presented with a loss of active range of motion of the hallux interphalangeal joint without functional weakness during athletic or daily life activities. Isokinetic testing at 30 degrees/second and 120 degrees/second revealed a significant average decrease of 28 ± 11% and 36 ± 4.1%, respectively, in plantarflexion peak torque. Although strength deficit persisted at latest follow-up, functional improvement was significant without morbidity due to FHL harvesting. For patients with chronic AT rupture with a rupture gap of at least 5 cm, surgical repair using FHL transfer with fibrous AT stump reinforcement achieved excellent outcomes.

Topics: Achilles Tendon; Adult; Aged; Ankle Joint; Biomechanical Phenomena; Chronic Disease; Female; Humans; Male; Middle Aged; Plastic Surgery Procedures; Postoperative Complications; Range of Motion, Articular; Recovery of Function; Rupture; Tendon Transfer; Torque; Treatment Outcome

Biomechanical analysis of derotational load-to-failure of pedicle screw (PS) instrumentation in cadaveric thoracic spinal segments.. To investigate the derotational torque that can be applied to the thoracic spine through different linked constructs and evaluate the modes of failure.. Thoracic derotation with PSs has been shown to provide better 3 plane correction than other methods but the effects of linked PS constructs has not been studied.. Four groups of thoracic segments with different PS constructs were loaded to failure with a rotational torque applied to the construct to simulate the left to right derotational force applied to a typical idiopathic dextrorotary thoracic scoliosis curve. Single screw T4 segments instrumented on the medial (group 1M) and lateral (group 1L) sides, bilaterally-linked T5 segments (group 2), unilaterally-linked T6-T9 segments on the medial (group 3M) and lateral (group 3L) sides, and quadrangularly-linked T6-T9 segments (group 4) were loaded with MTS machine in a simulated thoracic derotation model.. Single T4 PSs on the medial and lateral sides failed at 4.0 +/- 1.4 Nm (group 1M) and 6.1 +/- 2.5 Nm (group 1L), respectively. Bilaterally-linked T5 screws failed at 11.9 +/- 3.1 Nm (group 2). Unilaterally linked T6-T9 PS constructs on the medial and lateral sides failed at 21.2 +/- 7.5 Nm (group 3M) and 17.9 +/- 11.1 Nm (group 3L), respectively. Quadrangularly-linked PSs failed at 42.5 +/- 14.5 Nm (group 4). CONCLUSION.: A near linear increase in relative torque applied before failure was found with each additional PS linked. Linked constructs allow for significantly greater torque with less risk of PS breach of the spinal canal.

Topics: Aged; Aged, 80 and over; Biomechanical Phenomena; Bone Screws; Female; Humans; Internal Fixators; Male; Middle Aged; Models, Anatomic; Postoperative Complications; Range of Motion, Articular; Rotation; Scoliosis; Spinal Fusion; Stress, Mechanical; Thoracic Vertebrae; Torque

The main problems in intra-medullary nailing of femoral shaft-fractures are leg-length discrepancies and rotational differences with an incidence of 2-18% and 20-40% respectively. These may lead to severe postoperative sequelae such as additional correctional operations and difficult rehabilitation. Insufficient visualization can be considered the main reason for these complications. Finally, retention of the fragments in the correct alignment before nail insertion is difficult. To overcome these problems we established a robotic telemanipulator system to support the reduction process. It was evaluated in 30 fractures of embalmed human femora. Specially programmed software used an image-dataset which was acquired by an isocentric 3D fluoroscope. For visualization, a surface projection was generated. Localization and tracking of the fragments and the robot-arm as well as accuracy measurement was performed by using an optical navigation system. Manipulation was controlled via a force-feedback joystick. This way, collisions of the fragments were transmitted back to the surgeon. At the end of the reduction the robot could rigidly retain the fragments' position.

Topics: Algorithms; Analysis of Variance; Bone Malalignment; Bone Nails; Cadaver; Equipment Design; Femoral Fractures; Fluoroscopy; Fracture Fixation, Intramedullary; Humans; Imaging, Three-Dimensional; Leg Length Inequality; Postoperative Complications; Robotics; Software; Surgery, Computer-Assisted; Torque

The aim of this case series was to evaluate the Procera Software v1.6 and the surgical templates for flapless implant placement and immediate loading in atrophic fully edentulous maxillae.. The Procera Software was used to plan the exact position of the implants, and surgical templates were made to guide flapless implant placement. To allow for immediate loading, implants had to be placed with an insertion torque > 30 Ncm. Provisional cross-arch prostheses, produced before surgery using the software planning, were delivered immediately after implant placement, and replaced by final restorations after 6 months. Outcome measures were: prosthetic and implant failures, complications, post-operative pain and swelling, consumption of analgesics, and patient satisfaction. The followup stopped at 8 months post-loading.. Thirteen consecutive patients with atrophic maxillae were treated with 89 implants (6 to 8 implants per patient). Two flaps had to be elevated in two patients. One template fractured during surgery. Three implants in two patients were not loaded immediately. In four patients, impressions had to be taken to fit the provisional prostheses onto the implants. Five implants failed in four patients. One patient dropped out, due to financial reasons, with the provisional prosthesis still in function. Eight months after loading, all prostheses were successful and 11 out of 12 patients reported their quality of life and lifestyle had improved.. This software-based treatment planning may be useful in planning and treating challenging cases such as flapless implant placement and immediate loading of maxillary cross-arch bridges, but a learning curve is necessary.

Topics: Adult; Aged; Aged, 80 and over; Analgesics; Computer-Aided Design; Dental Implantation, Endosseous; Dental Implants; Dental Restoration Failure; Denture Design; Edema; Female; Follow-Up Studies; Humans; Jaw, Edentulous; Life Style; Male; Maxilla; Middle Aged; Pain, Postoperative; Patient Care Planning; Patient Satisfaction; Pilot Projects; Postoperative Complications; Prospective Studies; Quality of Life; Surgery, Computer-Assisted; Torque; Treatment Outcome

Distraction osteogenesis is useful for correcting limb length inequality, deformities, or short stature. Despite success with bone formation, soft tissue maladaptations including muscle and joint contracture may lead to undesirable results. Botulinum toxin A has been useful in treating spasticity in cerebral palsy, and has been used clinically in select cases to allay contracture in distraction osteogenesis. This study examines the toxin's efficacy in preventing distraction-induced loss of muscle strength and range of motion. The left tibias of 15 New Zealand White rabbits were distracted 1.5 mm/day until approximately a 20% gain was achieved. Each treatment group was divided into animals injected with saline or botulinum toxin in either the gastrocnemius or tibialis anterior muscles. A control group of two additional animals underwent no surgical procedure. Strength and range of motion were assessed prior to, and following, the experiment. At the study's end, animals were euthanized and muscles were harvested, when lengths and weights were recorded. All muscles injected with botulinum toxin showed decreased wet weight and persistent weakness upon completion of the study. Range of motion decreased in all distracted animals. When the gastrocnemius was injected, its strength was reduced but the tibialis anterior strength was preserved, and the limb achieved 22% greater dorsiflexion than saline controls (p = 0.016). When the tibialis anterior received the toxin, plantarflexion was increased by 23% (p = 0.049). Botulinum toxin injection prior to limb distraction increases the "post-lengthened" excursion of the injected muscle and this increased length may have a protective effect on its antagonist. In toxin-injected gastrocnemius muscles, the level of equinus contracture is reduced due to length gains in the Achilles tendon while the anterior tibialis maintains its ability to generate torque. Injection of botulinum toxin in the gastrocnemius may minimize equinus contracture and protect the anterior tibialis from damage during human tibial lengthening. Longer follow-up studies are needed to ensure that toxin-induced muscle weakness resolves with time.

Topics: Achilles Tendon; Animals; Bony Callus; Botulinum Toxins, Type A; Models, Animal; Muscle Contraction; Muscle, Skeletal; Neuromuscular Agents; Organ Size; Osteogenesis, Distraction; Postoperative Complications; Rabbits; Range of Motion, Articular; Recovery of Function; Tibia; Torque

The purpose of this study is to evaluate the clinical outcome of patients who had excision of a radioulnar heterotopic ossification (HO) as a complication of a distal biceps tendon repair. The hypothesis is that there are no measurable clinical losses that persist after excision.. Eight consecutive patients were identified between 1996 and 2005. All were treated with HO excision using a standard surgical technique and rehabilitation protocol. These individuals were studied and compared to a matched cohort of 8 patients who had a distal biceps tendon repair with a similar surgical technique that was uncomplicated. All study patients were evaluated at a minimum 1-year follow-up with physical examination, isokinetic dynamometry, and outcome measures. Comparisons were made both between groups as well as side-to-side within groups.. At follow-up examination, the mean arc of forearm rotation in the HO group measured 151 degrees. The mean arc of forearm rotation in the control group measured 165 degrees. With the numbers available, no measurable differences in arc of motion were identified between groups (p > .05). When compared to the normal, uninvolved side, patients who developed HO lost an average of 9 degrees of forearm pronation (p < .01). No differences were identified between the HO and control groups with respect to isokinetic torque, endurance strength, or Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire (American Academy of Orthopaedic Surgeons, Rosemont, IL) scores (p > .05).. When patients develop motion-limiting HO after distal biceps tendon repair, surgical resection can lead to a functional recovery of elbow and forearm motion. Biceps strength can be maintained with no measurable differences in clinical outcome when compared to individuals who do not suffer this complication following distal biceps repair.

Topics: Adult; Case-Control Studies; Elbow Joint; Follow-Up Studies; Forearm; Humans; Male; Middle Aged; Ossification, Heterotopic; Postoperative Complications; Radius; Range of Motion, Articular; Rotation; Supination; Tendons; Torque; Treatment Outcome; Ulna

The position of the acetabular cup is of decisive importance for the function of a total hip replacement (THR). Using the conventional surgical technique, correct placement of the cup often fails due to a lack of information about pelvic tilt. With CT-based and fluoroscopically-assisted navigation procedures the accuracy of implantation has been significantly improved. However, additional radiation exposure, high cost and the increased time requirement have hampered the acceptance of these techniques. The present anatomical study evaluates the accuracy of an alternative procedure--image-free navigation. This method requires little extra effort, does not substantially delay surgery, and needs no additional imaging. Press-fit cups were implanted in 10 human cadaveric hips with the help of the image-free navigation system, and the position of the cups was checked intraoperatively with a CT-based navigation system and postoperatively by computed tomography. All cups were implanted within the targeted safe zone with an average inclination of 44 degrees (range 40 degrees-48 degrees, SABW 2.7 degrees) and an average anteversion of 18 degrees (range 12-24 degrees, SABW 4.1 degrees). Analysis of accuracy of the image-free navigation software revealed only a small, clinically tolerable deviation in cup anteversion and cup inclination in comparison with the CT-based navigation system and the post operative CT scans. The evaluated image-free navigation system appears to be a practicable and reliable alternative to the computer-assisted implantation of acetabular cups in total hip arthroplasty.

Topics: Acetabulum; Algorithms; Arthroplasty, Replacement, Hip; Biomechanical Phenomena; Bone Malalignment; Computer Graphics; Humans; Infrared Rays; Photography; Postoperative Complications; Reproducibility of Results; Risk Assessment; Software Design; Surgery, Computer-Assisted; Technology Assessment, Biomedical; Tomography, X-Ray Computed; Torque

Coronary spasm and intimal injury may occur during selective right coronary arteriography. The safety and efficacy of right coronary arteriography in children and young adults were retrospectively reviewed for this report. Right coronary arteriography was performed in 200 patients. A standard-torque technique was used in 150 patients, a limited-torque technique was used with a reshaped left coronary catheter in 53 patients. The standard-torque technique was associated with proximal coronary spasm in nine patients, nonsustained ventricular tachycardia in one patient, and ST segment changes in one patient. The limited-torque technique was associated with no complications. The standard-torque technique was effective in one patient when the limited-torque technique failed to define distal coronary branches clearly. The limited-torque technique was effective in nine patients when the right coronary artery could not be engaged while attempting the standard-torque technique. In conclusion, right coronary arteriography may be performed in a safe and potentially more effective manner using a new catheter design and a limited-torque technique.

Topics: Adolescent; Adult; Age Factors; Cardiac Catheterization; Child; Child, Preschool; Coronary Angiography; Heart Diseases; Humans; Infant; Infant, Newborn; Postoperative Complications; Retrospective Studies; Spasm; Tachycardia, Ventricular; Torque

To study how well an anterior cruciate ligament (ACL) graft fixed at the 10 and 11 o'clock positions can restore knee function in response to both externally applied anterior tibial and combined rotatory loads by comparing the biomechanical results with each other and with the intact knee.. Biomechanical experiment using human cadaveric specimens.. Ten human cadaveric knees (age, 41+/-13 years) were reconstructed by placing a bone-patellar tendon-bone graft at the 10 and 11 o'clock positions, in a randomized order, and then tested using a robotic/universal force-moment sensor testing system. Two external loading conditions were applied: (1) 134 N anterior tibial load with the knee at full extension, 15 degrees, 30 degrees, 60 degrees, and 90 degrees of flexion, and (2) a combined rotatory load of 10 N-m valgus and 5 N-m internal tibial torque with the knee at 15 degrees and 30 degrees of flexion. The resulting kinematics of the reconstructed knee and in situ forces in the ACL graft were determined for each femoral tunnel position.. In response to a 134-N anterior tibial load, anterior tibial translation (ATT) for both femoral tunnel positions was not significantly different from the intact knee except at 90 degrees of knee flexion as well as at 60 degrees of knee flexion for the 10 o'clock position. There was no significant difference in the ATT between the 10 and 11 o'clock positions, except at 90 degrees of knee flexion. Under a combined rotatory load, however, the coupled ATT for the 11 o'clock position was approximately 130% of that for the intact knee at 15 degrees and 30 degrees of flexion. For the 10 o'clock position, the coupled ATT was not significantly different from the intact knee at 15 degrees of flexion and approximately 120% of that for the intact knee at 30 degrees of flexion. Coupled ATT for the 10 o'clock position was significantly smaller than for the 11 o'clock position at 15 degrees and 30 degrees of flexion. The in situ force in the ACL graft was also significantly higher for the 10 o'clock position than the 11 o'clock position at 30 degrees of flexion in response to the same loading condition (70 +/- 18 N v 60 +/- 15 N, respectively).. The 10 o'clock position more effectively resists rotatory loads when compared with the 11 o'clock position as evidenced by smaller ATT and higher in situ force in the graft. Despite the fact that ACL grafts placed at the 10 or 11 o'clock positions are equally effective under an anterior tibial load, neither femoral tunnel position was able to fully restore knee stability to the level of the intact knee.

Topics: Adult; Anterior Cruciate Ligament; Anterior Cruciate Ligament Injuries; Awards and Prizes; Biomechanical Phenomena; Bone Transplantation; Cadaver; Female; Femur; Humans; Joint Instability; Male; Middle Aged; Osteotomy; Postoperative Complications; Random Allocation; Range of Motion, Articular; Recovery of Function; Robotics; Tendons; Torque; Weight-Bearing

Topics: Aged; Equipment Design; Equipment Failure; Female; Humans; Postoperative Complications; Torque; Tracheostomy

There is no consensus over whether screw fixation for anterior cervical plating should include the posterior cortical shell of the vertebral bodies or not. Thus, the purpose of this study was to investigate the function of the posterior cortical shell with respect to maximal screw torque and pullout force. Twenty-four fresh frozen human cervical vertebrae coming from six spinal segments C4-C7 were used. They were scanned for bone mineral density (BMD) and then assigned to two groups with comparable bone density and segmental distribution. The posterior longitudinal ligament was resected carefully and two parallel burr holes were drilled into each vertebral body. The posterior cortical shell was removed in one burr hole, using a 6-mm steel burr, producing a shallow excavation with a depth of approximately 2 mm. An ABC screw was inserted into each burr hole. The screw to be inserted into the hole with the posterior excavation was called "monocortical". In contrast, the contralateral screw was called "bicortical". Peak torque was measured in one group, while pullout force was analyzed using the specimens of the second group. Mean value and standard deviation were calculated for peak torque and pullout force with respect to the type of fixation. A paired t-test was used to determine the effect of fixation type on peak torque and pullout force. Pearson moment correlation coefficients were calculated to determine the effect of BMD on peak torque and pullout force with respect to whether the screw was "mono- or bicortical". A 95% level of significance was used for all tests. No significant differences for peak torque and pullout force could be found comparing monocortical and bicortical screw fixation. However, for both monocortical and bicortical screw fixation, a positive correlation was seen for peak torque versus BMD and for pullout force versus bone mineral density, respectively. The importance of the posterior cortical shell for screw pullout force and screw peak torque seems to be negligible. In constrast, BMD greatly influences both peak torque and pullout force for both types of fixation.

Topics: Bone Density; Bone Screws; Cervical Vertebrae; Humans; Internal Fixators; Middle Aged; Postoperative Complications; Spinal Fusion; Torque

The current successful management of idiopathic scoliosis is an orthopaedic and not a paediatric responsibility. Hence the immediate aim of etiologic research is to improve surgical treatments based on a better understanding of the causation of the deformity. This focuses attention on the pathomechanisms of the spinal and ribcage deformities. The mechanisms of spinal deformity about the apex are unresolved but may be caused by forces created in the anterior spinal column. Some current theories with practical application involve (1) front-back spinal growth mechanisms, (2) rib growth asymmetry and (3) muscles.. The application of theory to surgical practice is advanced for concepts of front-back spinal growth asymmetry but rib hump reassertion occurs after surgery and these concepts ignore the ribcage as a possible factor in scoliosis pathogenesis. A theory of ribcage asymmetry involving concave rib overgrowth is beginning to be evaluated surgically. After surgery for IIS and AIS reassertion of the deformity has been shown to involve preoperative spinal and concave rib factors; the larger the concave rib-spinal angle the better results at 2-5 year. Muscular factors that may trigger/exacerbate the apical spinal deformity of scoliosis need more research. The concept that AIS pathogenesis involves putative neuromuscular dysfunction that deforms an immature spine is considered likely by several workers.

Topics: Adolescent; Biomechanical Phenomena; Bone Remodeling; Child; Functional Laterality; Humans; Isometric Contraction; Lordosis; Lumbar Vertebrae; Muscle, Skeletal; Postoperative Complications; Ribs; Scoliosis; Thoracic Vertebrae; Torque

Topics: Bone Screws; Fracture Fixation, Internal; Hip Fractures; Humans; Postoperative Complications; Torque

One treatment strategy for recurrent dislocation after total hip arthroplasty is the use of a constrained acetabular component. A major drawback of currently available constrained components is the limited range of motion (ROM). We present a novel constrained component that employs a monopolar, highly cross-linked polyethylene liner with cutouts oriented to allow increased ROM, while maintaining constraint against dislocation. ROM and lever-out tests comparing this novel design with a conventional constrained component showed that the cutaway monopolar component allowed ROM substantially greater than a currently available design. The lever-out torque for the cutaway monopolar constrained component was 243% higher than the conventional constrained component. This novel constrained acetabular component offers promise for providing excellent constraint against dislocation, while maintaining a wide ROM.

Topics: Acetabulum; Arthroplasty, Replacement, Hip; Hip Dislocation; Hip Prosthesis; Humans; Polyethylenes; Postoperative Complications; Prosthesis Design; Prosthesis Failure; Range of Motion, Articular; Torque

The authors investigated quadriceps muscle strength following operative treatment of femoral shaft fractures in 135 patients. Patients were categorized according to the kind of procedure performed: open Kuntscher intramedullary nailing--30 cases; Zespol--30 cases; AO plate osteosynthesis--47 cases and closed intramedullary nailing 28 cases. Two groups of patients were formed according to surgical technique: open method--107 cases and closed method--28 cases. 39 patients treated with an open method required re-operation. The best results were obtained in cases treated with closed technique--79.6%. The worst results were noted in the group requiring re-operation: 56.7%. The worst results were found in cases with comminuted fractures, and those located in the distal third of the femoral shaft.

Topics: Adolescent; Adult; External Fixators; Female; Femoral Fractures; Fracture Fixation; Fracture Fixation, Internal; Humans; Isometric Contraction; Male; Middle Aged; Muscle, Skeletal; Postoperative Complications; Rest; Time Factors; Torque

Any surgeon experienced with a laparoscopic approach to intra-abdominal surgery on morbidly obese patients is aware of the increased difficulty associated with the patients' obesity. We present a study of the mechanics of laparoscopic surgery that explains the difficulty subjectively experienced in terms of the decreased sensitivity felt by the surgeon as a result of the increased thickness of the abdominal wall and increasing force required for the repositioning of the tip of the operating instrument. We propose that the placement and angling of the trocar in the abdominal wall are of paramount importance in the successful and safe completion of laparoscopic procedures in obese patients.

Topics: Abdomen; Elasticity; Humans; Laparoscopes; Laparoscopy; Mathematics; Obesity, Morbid; Postoperative Complications; Radiography, Abdominal; Tomography, X-Ray Computed; Torque

Even nowadays the idea of most of the operations against strabismus is based on myectomy and reposition of the rectus muscles. At the Department of Ophthalmology of the University Medical School of Debrecen we use mainly these two methods of operation. At our Department we performed 1605 operations against strabismus during the last 10 years. 1269 of our patients had convergent, 336 had divergent strabismus. The majority of the operations were performed on patients less than 6 years of age, under general anesthesia. The outcome of the operation is successful if it results in a situation, in which torque affecting the eyeball stabilizes it in the normal position. The advantage of the combined surgical procedure is that the former muscular balance remains intact, and by relatively small intervention good results can be achieved. In the rectus muscles of squint patients anatomical and histopathological changes could be found, especially if they did not receive pleoptic treatment preoperatively. Depending on the direction of the strabismus one of the muscles is thicker, while the other is thinner, due to hyper- and hypofunction. Our surgical experience of many years showed that by modifying the classical technique of the operations with some fine technical tricks it was possible to increase the success rate. In our film we presented the right way of incising and handling the subconjunctival connective tissue (Tenon capsule) thus making it possible to lay it back to its original place at the end of the operation. This way the chance of postoperative scarring is reduced. We demonstrated how to test the contractility of the muscles by using muscle-hooks, that replaces the forceps test. In case of myectomy we demonstrated the tricks of how to handle the easiest and the finest way. In case of retroposition we can achieve perfect reconstruction and wound healing by using the shown simple technique. We also take much care of suturing the conjunctiva during operations performed on infants that is important because of their undisciplined behavior.

Topics: Anesthesia, General; Child; Cicatrix; Conjunctiva; Connective Tissue; Esotropia; Exotropia; Humans; Infant; Infant Behavior; Methods; Muscle Contraction; Oculomotor Muscles; Orthoptics; Postoperative Complications; Retrospective Studies; Strabismus; Suture Techniques; Torque; Treatment Outcome; Wound Healing

The intraoperative and early postoperative mechanical complications of a procedure combining an atrial screw-in lead and a ventricular screw-in lead insertion were prospectively evaluated. The procedure was performed in 119 consecutive patients (mean age 69 +/- 8 years), at first implant in 100 patients and at reoperation in 19. Nine patients had previously undergone cardiac surgery and three underwent transvenous ventricular defibrillator implantation. The double sets of leads were introduced through 2 separate veins in 5 cases, through a single venous route in 114 cases, using a percutaneous approach in 75 cases and a venous cutdown in 49, and a guidewire procedure following the venotomy in 19. The screw was mannitol coated in 102 cases, exposed in 111, and extendable/retractable in 25. The fixation of the ventricular lead was performed at the apex in 108 cases, at the outflow tract in 11, and was followed by the fixation of the atrial lead at the appendage in 112 cases and at the lateral wall in 7 cases. The lead positioning and fixation were successful at first attempt in 103 cases and after repeated lead manipulation in 19 cases. The rotational torque could be transferred to the helix in all cases except in one patient who required a second vein puncture. Unintentional fixation in the ventricular chamber with subsequent failure to remove the lead occurred in one patient. Reoperation for lead dislodgment was required in two patients. In one patient, symptomatic pericarditis with pericardial effusion was observed 1 day after the procedure and resolved spontaneously. Dual active fixation is feasible with a low incidence of mechanical complications.

Topics: Aged; Atrial Function; Cardiac Surgical Procedures; Catheterization, Peripheral; Defibrillators, Implantable; Diuretics, Osmotic; Electrodes, Implanted; Equipment Design; Evaluation Studies as Topic; Feasibility Studies; Female; Heart Atria; Heart Ventricles; Humans; Incidence; Intraoperative Complications; Male; Mannitol; Pacemaker, Artificial; Pericardial Effusion; Pericarditis; Postoperative Complications; Prospective Studies; Reoperation; Surface Properties; Torque; Venous Cutdown; Ventricular Function