zirconium has been researched along with yttrium in 902 studies
Timeframe | Studies, this research(%) | All Research% |
---|---|---|
pre-1990 | 22 (2.44) | 18.7374 |
1990's | 9 (1.00) | 18.2507 |
2000's | 152 (16.85) | 29.6817 |
2010's | 588 (65.19) | 24.3611 |
2020's | 131 (14.52) | 2.80 |
Authors | Studies |
---|---|
Nishikawa, S; Shirota, Y | 1 |
Bump, RL; Hooker, SP; Salimeno, T; Wilkinson, EG | 1 |
Ali, M; Bukhari, SJ; Hashmi, FH; Husain, A; Shoaib, KA | 1 |
Williams, C | 1 |
Baerveldt, G; Berns, MW; Hill, RA; Ozler, SA; Pickford, M; Profeta, GA | 1 |
Christel, P; Heller, M; Meunier, A; Peille, CN; Torre, JP | 1 |
Ganrot, PO | 1 |
Haug, A; Suhayda, CG | 1 |
Goh, CH; Kanapilly, GM | 1 |
Knoch, W; Lahr, H; Muju, B | 1 |
Siekierski, S; Tomazic, B | 1 |
Loyalka, SK; Tompson, RV; Yaparpalvi, R | 1 |
Bruzzese, N; Burger, W; Cittadini, A; Covacci, V; Maccauro, G; Marmo, E; Piconi, C; Ricci, GA; Richter, HG | 1 |
Kern, M; Wegner, SM | 2 |
Ahmad, I | 1 |
Christel, P | 1 |
Ito, A; Niwa, S; Tange, S; Tateishi, T | 1 |
Jung, YG; Kim, DK; Lawn, BR; Peterson, IM | 1 |
Funduk, N; Jevnikar, P; Kosmac, T; Marion, L; Oblak, C | 2 |
Bergman, M; Sjölin, R; Sundh, A | 1 |
Ceballos, L; Marshall, GW; Osorio, R; Toledano, M | 1 |
Carlén, A; Karlsson, S; Milleding, P; Wennerberg, A | 1 |
Roebuck, EM; Saunders, WP; Whitters, CJ | 1 |
Ceballos, L; Flaitz, C; García-Godoy, F; Hicks, J; Osorio, R; Toledano, M | 1 |
Ceballo, L; Marshall, GW; Osorio, R; Tay, FR; Toledano, M | 1 |
Herold, V; Holzhüter, M; Kuhlisch, E; Luthardt, RG; Sandkuhl, O; Schnapp, JD; Walter, M | 1 |
Aldini, NN; Bossi, MG; Dubini, B; Fini, M; Giardino, R; Giavaresi, G; Krajewski, A; Mazzocchi, M; Ravaglioli, A; Rustichelli, F; Stanic, V | 1 |
Boey, YC; Guo, H; Khor, KA; Miao, X | 1 |
Abu-Bakr, N; Iwaku, M; Okamoto, A; Shigetani, Y; Tate, Y | 1 |
Cheang, P; Khor, KA; Li, H | 1 |
Bergman, M; Lerner, U; Sjögren, G; Sundh, A; Uo, M; Watari, F | 1 |
Armstrong, TR; Becher, PF; Dong, J; Hu, MZ; Payzant, EA | 1 |
Chen, JH; Sun, LJ; Zhang, B | 1 |
Raigrodski, AJ | 3 |
HOWARD, JM; SALAK, WW | 1 |
KAWIN, B | 1 |
MOGHISSI, A | 1 |
LEDERER, M; SARACINO, F | 1 |
BLATTNER, L; SCHIESSLE, W; SCHMIDTKE, I | 1 |
CERRAI, E; GHERSINI, G | 1 |
Salinas, TJ | 1 |
SCHUBERT, J; WHITE, MR | 2 |
Cheang, P; Gu, YW; Khor, KA; Pan, D | 2 |
Hussein, A; Kakaboura, A; Koutayas, SO; Strub, JR | 1 |
Albakry, M; Guazzato, M; Ringer, SP; Swain, MV | 1 |
Chevalier, J; Deville, S; Jullian, R; Lair, F; Münch, E | 1 |
Herold, V; Holzhüter, MS; Luthardt, RG; Rudolph, H; Walter, MH | 1 |
Lawn, BR; Pajares, A; Zhang, Y | 1 |
COCHRAN, KW; DOULL, J; DUBOIS, KP; MAZUR, M | 1 |
Davis, R; Jiang, G; Mishler, D; Mobley, JP; Schulman, JH | 1 |
Lawn, BR; Zhang, Y | 2 |
Albakry, M; Guazzato, M; Quach, L; Swain, MV | 1 |
Chevalier, J; Deville, S; Fantozzi, G; Gremillard, L | 1 |
Abe, T; Ambe, S; Francis, AJ; Ozaki, T | 1 |
Kuretzky, T; Lauer, HC; Ottl, P; Piwowarczyk, A | 1 |
Vollmann, M | 1 |
Devigus, A; Lombardi, G | 2 |
Molin, M; Sjögren, G; Sundh, A | 1 |
Filser, F; Gauckler, LJ; Hammerle, CH; Loeffel, O; Lüthy, H; Schumacher, M | 1 |
Chian, KS; Hao, L; Lawrence, J | 1 |
Derand, T; Kvam, K; Molin, M | 1 |
Caputo, AA; Lang, LA; McLaren, EA; Miklus, VG; White, SN | 1 |
Burke, FJ; Douglas, WH; Fleming, GJ; Marquis, PM; Palin, WM; Pintado, MR; Randall, RC | 1 |
Curtis, AR; Fleming, GJ; Wright, AJ | 2 |
Denry, IL; Holloway, JA | 1 |
Chevalier, J; Deville, S; Gremillard, L | 1 |
Courpied, JP; Hamadouche, M; Kerboull, L; Kerboull, M; Madi, F | 1 |
Sjögren, G; Sundh, A | 2 |
Filser, F; Gauckler, LJ; Kocher, P; Studart, AR | 2 |
Filser, F; Gauckler, LJ; Kocher, P; Lüthy, H; Studart, AR | 2 |
Gabbert, O; Gilde, H; Ohlmann, B; Rammelsberg, P; Schmitter, M | 1 |
Andersson, M; Oden, A; Persson, A; Sandborgh-Englund, G | 1 |
Polack, MA | 1 |
Bindl, A; Lüthy, H; Mörmann, WH | 1 |
Shannon, A | 1 |
Giordano, RA; Morgano, SM; Papanagiotou, HP; Pober, R | 1 |
Sakka, Y; Skorokhod, VV; Vasylkiv, O | 1 |
Ascencio, JA; Chávez-Carvayar, JA; González, G; Santoyo-Salazar, J; Schabes-Retchkiman, PS; Tartaj-Salvador, J | 1 |
Ali, A; Burke, FJ; Palin, WM | 1 |
Knowles, JC; McDonald, A; Petrie, A; Pittayachawan, P | 1 |
Bo, ZJ; Chen, Y; Li, WJ; Maochu, G; Min, LZ; Ming, Z | 1 |
Kou, S; Kou, W; Liu, H; Sjögren, G | 1 |
Fernández-Fairén, M; Gil, FJ; Sala, P | 1 |
Mah, J; Mercer, C; Shrotriya, P; Soboyejo, WO; Zhou, J | 1 |
Bächle, M; Bakalinis, E; Butz, F; Hübner, U; Kohal, RJ | 1 |
Bürki, G; Kern, P; Michler, J; Radice, S; Textor, M | 1 |
Atsuta, M; Tsuo, Y; Yoshida, K | 1 |
Kern, M; Ludwig, K; Uphaus, A; Wolfart, S | 1 |
Fischer, J; Stawarczyk, B | 1 |
Bouhy, A; Moureau, T; Raepsaet, N; Vanheusden, A | 1 |
Parker, RM | 1 |
Piascik, JR; Stoner, BR; Teixeira, EC; Thompson, JY | 2 |
Pinero, J | 1 |
Goldstein, JH; Werrin, SR | 1 |
Blanco, A; Fernandez-Fairen, M; Gil, FJ; Murcia, A; Sevilla, P | 1 |
Gjerdet, NR; Oilo, M; Tvinnereim, HM | 1 |
Denry, I; Kelly, JR | 1 |
Cattell, MJ; Knowles, JC; McDonald, A; Pittayachawan, P; Tsalouchou, E | 1 |
Pilathadka, S; Vahalová, D; Vosáhlo, T | 1 |
Konsolakis, M; Yentekakis, IV | 1 |
Awad, MA; Marghalani, TY | 1 |
Fischer, H; Telle, R; Waindich, A | 1 |
Kanno, T; Milleding, P; Wennerberg, A | 1 |
Katerberg, BJ; Nayfeh, T; Roy, ME; Steiger, JA; Whiteside, LA | 1 |
Jian Li, W; Jun Bo, Z; Mao Chu, G; Sheng Hui, Y; Yao Qiang, C; Zhi Min, L | 1 |
Kerkdijk, S; Ozcan, M; Valandro, LF | 1 |
de Jager, N; de Kler, M; Meegdes, M; van der Zel, JM | 1 |
de Andrade, OS; Hirata, R; Reis, AF; Viotti, R | 1 |
Bindl, A; Mörmann, WH | 1 |
GOFMAN, JW | 1 |
DOBSON, EL; GOFMAN, JW | 1 |
SCHUBERT, J | 1 |
Fischer, J; Hämmerle, CH; Stawarczyk, B; Strub, JR; Tomic, M | 1 |
Brandon, NP; Brett, DJ; Cohen, LF; Lohsoontorn, P; Maher, RC | 1 |
Koçak, A; Mecholsky, JJ; Sertgöz, A; Taskonak, B; Yan, J | 1 |
Nijhuis, H; Ozcan, M; Valandro, LF | 1 |
Anusavice, KJ; Borges, GA; Mecholsky, JJ; Moore, BK; Taskonak, B; Yan, J | 1 |
Andersson, M; Odén, A; Persson, AS; Sandborgh-Englund, G | 1 |
Knowles, JC; McDonald, A; Pittayachawan, P; Young, A | 1 |
Goddard, WA; Jang, SS; Merinov, BV; van Duin, AC | 1 |
El-Mowafy, O; Finer, Y; Tam, L; Watson, PA; Zahran, M | 1 |
Cruz, R; Gonçalvez, F; Granjeiro, JM; Takamori, ER; Zanetti, A; Zanetti, RV | 1 |
Arnetzl, G; Arnetzl, GV; Dornhofer, R; Koller, M | 1 |
Lohbauer, U; Petschelt, A; Reich, S | 1 |
Hämmerle, CH; Roos, M; Sailer, I; Wettstein, F | 1 |
Gomi, H; Lassila, LV; Shinya, A; Tsukakoshi, M; Vallittu, PK | 1 |
Amaral, R; Bottino, MC; Bressiani, AH; Lazar, DR; Ozcan, M; Ussui, V; Valandro, LF | 1 |
Gabbert, O; Ohlmann, B; Rammelsberg, P; Schmitter, M; Schwarz, S | 1 |
Gabbert, O; Gilde, H; Ohlmann, B; Rammelsberg, P; Ruef, T; Schmitter, M | 1 |
Fröberg, K; Hjerppe, J; Lassila, LV; Vallittu, PK | 1 |
Fröberg, K; Hjerppe, J; Lassila, LV; Närhi, T; Vallittu, PK | 1 |
Andreiotelli, M; Kohal, RJ | 1 |
Hayaishi, Y; Miki, H; Sugano, N; Yoshikawa, H | 1 |
Anselmi-Tamburini, U; De Souza, RA; Kim, S; Martin, M; Munir, ZA; Pietrowski, MJ | 1 |
Beuer, F; Naumann, M; Sorensen, JA; Steff, B | 1 |
Ban, S; Nawa, M; Pezzotti, G; Sato, H; Yamada, K | 1 |
Fischer, J; Grohmann, P; Stawarczyk, B | 1 |
Papadopoulos, TD; Spyropoulos, KD | 1 |
Finke, HC; Klaus, G; Kohal, RJ | 1 |
Fischer, J; Hämmerle, CH; Stawarczyk, B; Trottmann, A | 1 |
Behr, M; Feilzer, AJ; Rosentritt, M; van der Zel, JM | 1 |
Dorso, CO; Goddard, WA; Han, SS; Merinov, BV; van Duin, AC | 1 |
El-Megharbel, SM; El-Wahed, MG; Refat, MS | 1 |
Arvidson, K; Haag, P; Karlsson, S; Messelt, EB; Mustafa, K; Wennerberg, A | 1 |
Fischer, J; Hämmerle, CH; Stawarzcyk, B; Trottmann, A | 1 |
Burke, FJ; Cowan, AJ; Crisp, RJ; Lamb, J; Thompson, O; Tulloch, N | 3 |
Bulpakdi, P; Mecholsky, JJ; Taskonak, B; Yan, J | 1 |
Adatia, ND; Bayne, SC; Cooper, LF; Thompson, JY | 1 |
Kim, JW; Zhang, Y | 2 |
Guess, P; Rekow, ED; Santana, T; Silva, NR; Thompson, VP; Zhang, Y | 1 |
Swain, MV; Thiel, N; Tholey, MJ | 2 |
Guo, TW; Jin, ZH; Liu, HC; Wang, L; Yang, LQ; Yang, SF | 1 |
Irie, M; Maruo, Y; Minagi, S; Nagaoka, N; Nishigawa, G; Oka, M; Suzuki, K; Yoshida, Y; Yoshihara, K | 1 |
Bonfante, EA; Coelho, PG; Guess, PC; Rekow, ED; Silva, NR; Thompson, VP | 1 |
Cavalcanti, AN; Foxton, RM; Gianinni, M; Marchi, GM; Oliveira, MT; Pilecki, P; Watson, TF | 1 |
Kern, M; Ludwig, K; Puschmann, D; Wolfart, S | 1 |
Karakoca, S; Yılmaz, H | 1 |
Canale, A; Cortellini, D; Valenti, M | 1 |
Augusti, D; Cerutti, A; Re, D; Sailer, I; Spreafico, D | 1 |
Koidis, P; Koutayas, SO; Strub, JR; Vagkopoulou, T | 1 |
Coelho, PG; Nourian, P; Rekow, ED; Silva, NR; Thompson, VP | 1 |
Behr, M; Handel, G; Kolbeck, C; Rosentritt, M; Steiger, D | 1 |
Guess, PC; Thompson, VP; Zhang, Y | 1 |
Ban, S; Izumi, Y; Machigashira, M; Miyamoto, M; Noguchi, K; Takeuchi, H; Yamashita, D | 1 |
Kovacevska, G; Vankovski, V | 1 |
Parry, EE; Quinn, GD; Quinn, JB; Sundar, V | 1 |
Barcikowski, S; Bärsch, N; Jakobi, J; Weiler, S | 1 |
Anunmana, C; Anusavice, KJ; Mecholsky, JJ | 1 |
Kern, M; Ludwig, K; Mehl, C; Steiner, M | 1 |
Adams, JB; Berend, KR; Clarke, IC; Lombardi, AV; Seng, BE | 1 |
Lin, YZ; Tian, JM; Wang, C; Wen, N; Yi, YF | 1 |
Roy, ME; Whiteside, LA | 1 |
Nothdurft, FP; Pospiech, PR | 1 |
Covel, NS; Guess, PC; Kim, JW; Rekow, ED; Zhang, Y | 1 |
Bahat, Z; Mahmood, DJ; Vult von Steyern, P | 1 |
Eliades, G; Silikas, N; Syres, K; Thomas, A; Zinelis, S | 1 |
Bonfante, EA; Coelho, PG; Guess, PC; Silva, NR; Thompson, VP | 2 |
Burnett, LH; Magne, P; Paranhos, MP | 2 |
Hauser-Gerspach, I; Meyer, J; Stübinger, S | 1 |
Ai, HJ; Bao, Y; Si, WJ; Yin, JY; Zhang, ZT | 1 |
Denry, IL; Holloway, JA; Peacock, JJ | 1 |
Foxton, RM; Ikeda, M; Kitayama, S; Nikaido, T; Sadr, A; Tagami, J; Takahashi, R; Zhu, L | 1 |
Koidis, P; Koutayas, SO; Pelekanos, S; Strub, JR; Vagkopoulou, T | 1 |
Ma, F; Yang, DW; Zhu, J | 1 |
Eschbach, S; Harder, S; Kern, M; Lehmann, F; Wolfart, S | 1 |
Blatz, MB; Koizumi, H; Komine, F; Matsumura, H; Nakayama, D; Tanoue, N | 1 |
Imbihl, R; Rösken, LM; Toghan, A | 1 |
Chai, H; Lawn, BR; Zhang, Y | 1 |
Berthold, C; Swain, MV; Thiel, N; Tholey, MJ | 1 |
Degrange, M; Zhang, C | 1 |
Guess, PC; Kim, JW; Rekow, ED; Thompson, VP; Zhang, Y | 1 |
Brewer, JD; Monaco, EA; Muñoz, CA; Qeblawi, DM | 1 |
Funduk, N; Jevnikar, P; Kocjan, A; Kosmac, T; Krnel, K | 1 |
Bonfante, EA; Coelho, PG; Dianne Rekow, E; Sailer, I; Silva, NR; Thompson, VP | 1 |
Al-Amleh, B; Lyons, K; Swain, M | 1 |
Fischer, J; Hämmerle, CH; Sailer, I; Stawarczyk, B | 1 |
Ha, SR; Kim, SH; Lee, JB; Yun, JY | 1 |
Bonfante, EA; Bonfante, G; Coelho, PG; Guess, PC; Lorenzoni, FC; Martins, LM; Silva, NR; Thompson, VP | 1 |
Fujishima, A; Hotta, Y; Kuriyama, S; Manabe, A; Miyazaki, T; Takeuchi, K; Tamaki, Y | 1 |
Bonfante, EA; Coelho, PG; Rafferty, B; Rekow, ED; Silva, NR; Thompson, VP; Zavanelli, RA | 1 |
Bittner, N; Hill, T; Randi, A | 1 |
Borchers, L; Dittmer, MP; Junghanns, J; Kohorst, P; Stiesch, M | 1 |
Deng, B; Hou, KL; Liu, HC; Ma, TT; Shao, LQ; Tian, JM; Wen, N; Yi, YF; Zhang, WW | 1 |
Lughi, V; Sergo, V | 1 |
Luo, XP; Zhang, L | 1 |
Gédet, P; Hefti, T; Schliephake, H; Schlottig, F; Staedt, H | 1 |
Collares, FM; Fontanella, VR; Lima, GS; Ogliari, FA; Piva, E; Samuel, SM | 1 |
Grunder, U; Snétivy, D; Spielmann, HP | 1 |
Cattell, M; Chen, X; Niggli, J; Ntala, P | 1 |
Bonfante, EA; Coelho, PG; Ferencz, JL; Silva, NR; Thompson, VP; Zavanelli, RA | 1 |
Kern, M; Kocjan, A; Kosmac, T; Lehmann, F; Zhang, S | 1 |
Balestrino, G; Esposito, V; Licoccia, S; Sanna, S; Tebano, A; Traversa, E | 1 |
Bottino, MA; Capelli, DB; May, LG; Ozcan, M; Passos, SP; Valandro, LF | 1 |
Begand, S; Fischer, H; Kirsten, A; Oberbach, T; Telle, R | 1 |
Beuerman, RW; Khor, KA; Mehta, JS; Perera, AP; Tan, A; Tan, D; Tan, XW | 1 |
Arola, D; Hebert, C; Quinn, GD; Studart, AR; VerHoef, JR | 1 |
Amez-Droz, M; Cattani Lorente, M; Demellayer, R; Richard, J; Scherrer, SS; Wiskott, HW | 1 |
Ammann, P; Cattani-Lorente, M; Jobin, M; Scherrer, SS; Wiskott, HW | 1 |
Gao, Y; Gui, LH; Huang, H; Zhang, FQ | 2 |
Baig, MR; Nicholls, JI; Tan, KB | 1 |
Ban, S; Minesaki, Y; Noda, M; Okuda, Y; Takenouchi, Y; Tsuruki, J | 1 |
Bohl, C; Davis, G; Franklin, W; Guazzato, M; Klineberg, I; Walton, TR | 1 |
Cattell, MJ; Chadwick, TC; Chen, X; Hill, R; Wilson, RM | 1 |
Shinozaki, N; Shiraishi, T; van Noort, R; Wood, DJ | 1 |
Cattani-Lorente, M; de Mestral, F; Griggs, JA; Scherrer, SS; Vittecoq, E; Wiskott, HW | 1 |
Bonfante, EA; Coelho, PG; Rafferty, BT; Rekow, ED; Silva, NR; Thompson, VP; Zavanelli, RA | 1 |
Baba, S; Kulunk, S; Kulunk, T; Kurt, M; Ural, C | 1 |
Albrecht, T; Fischer, H; Kappert, HF; Kirsten, A | 1 |
Fan, Y; Guo, G; Xu, X | 1 |
Jiang, L; Li, W; Liao, YM; Zhang, JC; Zhao, YQ | 1 |
Att, W; Guess, PC; Strub, JR | 1 |
Blatz, MB; Komine, F; Matsumura, H | 1 |
El-Didamony, AM; El-Shwiniy, WH; Sadeek, SA; Zordok, WA | 1 |
Coelho, PG; Guess, P; Rekow, ED; Silva, NR; Thompson, VP; Zhang, Y | 1 |
Linderoth, EH; Mahmood, DJ; Vult Von Steyern, P | 1 |
Mainjot, AK; Sadoun, MJ; Schajer, GS; Vanheusden, AJ | 4 |
da Silva, EM; de Goes, MF; Maia, LC; Miragaya, L; Sabrosa, CE | 1 |
Bergler, M; Blatz, MB; Chiche, GJ; Holst, S; Ozer, F; Phark, JH | 1 |
Akin, GE; Akin, H; Guney, U; Mutaf, B; Tugut, F | 1 |
Işerı, U; Kazazoğlu, E; Küçükoğlu, D; Ozkurt, Z | 1 |
Cura, C; Özcan, M; Valandro, LF | 1 |
Cardelli, P; Monaco, C; Scotti, R; Valandro, LF | 1 |
Kohal, RJ; Tsakona, A; Wolkewitz, M | 1 |
Li, L; Lv, PJ; Wang, Y | 1 |
Ramanathan, S; Sankaranarayanan, SK | 1 |
Aras, MA; Bachhav, VC | 1 |
Atsuta, M; Doi, M; Sawase, T; Yoshida, K | 1 |
Coelho, PG; Esquivel-Upshaw, J; Farah, JW; Powers, JM; Silva, NR; Thompson, VP; Valverde, GB | 1 |
De Aza, AH; Fernandes, MH; Gallego-Perez, D; Hansford, DJ; Magallanes-Perdomo, M; Monteiro, FJ; Pelaez-Vargas, A; Pena, P | 1 |
Lai, BK; Ramanathan, S; Tsuchiya, M | 1 |
Chai, J; Chow, TW; Chu, FC | 1 |
Ereifej, N; Rodrigues, FP; Silikas, N; Watts, DC | 1 |
Gessner, J; Lohbauer, U; Mitov, G; Muecklich, F; Pospiech, P; Woll, K | 1 |
Behr, M; Hahnel, S; Handel, G; Kolbeck, C; Preis, V; Rosentritt, M | 1 |
Aydin, C; Bal, BT; Nemli, SK; Tıraş, T; Yilmaz, H | 2 |
Choi, YS; Ha, SR; Kim, SH; Lee, JB; Moon, JE | 1 |
Borba, M; Cesar, PF; de Araújo, MD; Della Bona, A; Fukushima, KA; Griggs, JA; Yoshimura, HN | 1 |
Baldassarri, M; Rekow, ED; Stappert, CF; Thompson, VP; Zhang, Y | 1 |
Goto, D; Higuchi, D; Hotta, Y; Kuriyama, S; Manabe, A; Miyazaki, T; Terui, Y | 1 |
Kawai, Y; Kono, S; Ohnuki, S; Uo, M; Wang, Y; Watari, F | 1 |
Nakamura, T; Nishida, H; Ohnishi, H; Sekino, T; Takeuchi, M; Usami, H; Yatani, H | 1 |
Bianchi, A; Borgonovo, A; Censi, R; Dolci, M; Maiorana, C; Vavassori, V | 1 |
Borchers, L; Dittmer, MP; Jörn, D; Kohorst, P; Sarafidou, K; Stiesch, M | 1 |
El Madhoun, S; Larsson, C; Vult von Steyern, P; Wennerberg, A | 1 |
Madan, N; Pannu, K | 1 |
Becker, HW; Chakraborty, S; Dey, GK; Rogalla, D; Sengupta, P | 1 |
Gomi, H; Lin, J; Shinya, A | 1 |
Miho, O; Nomoto, S; Onodera, K; Sato, T; Yotsuya, M | 1 |
Becker, K; Coelho, PG; Ihrke, R; Quade, A; Silva, NR; Thompson, VP; Valverde, GB | 1 |
Cardelli, P; Monaco, C; Ozcan, M | 1 |
Deguchi, M; Endo, T; Fujii, T; Ikemura, K; Kadoma, Y; Negoro, N; Tanaka, H | 1 |
Kazama, M; Ogura, H; Ohkuma, K | 1 |
Haller, WK; Lawn, BR; Lloyd, IK; Saied, MA | 1 |
Gabbert, O; Karatzogiannis, E; Karl, J; Ohlmann, B; Rammelsberg, P; Schmitter, M | 1 |
Bussi, G; Gale, JD; Raiteri, P | 1 |
Dard, M; Deronjic, I; Gass, C; Hauser-Gerspach, I; Mauth, C; Meyer, J; Stübinger, S; Vadaszan, J; Waltimo, T | 1 |
Field, CJ; Swain, MV; Thompson, MC | 2 |
Prithviraj, DR; Regish, KM; Sharma, D | 1 |
Larsson, C | 1 |
Borba, M; Cesar, PF; Della Bona, Á; Griggs, JA | 1 |
Jiang, L; Li, W; Liao, Y; Wan, Q | 1 |
Choi, JE; Swain, MV; Torr, B; Waddell, JN | 1 |
Borba, M; Cesar, PF; de Araújo, MD; de Lima, E; Della Bona, A; Griggs, JA; Yoshimura, HN | 1 |
Corcodel, N; Luthardt, RG; Moldovan, O; Rudolph, H | 1 |
Allahkarami, M; Hanan, JC | 1 |
Rojas-Vizcaya, F | 1 |
Gao, Y; He, F; Zhang, FQ | 1 |
Hallmann, L; Hämmerle, CH; Mehl, A; Özcan, M; Reusser, E; Stadler, J; Stawarczyk, B; Ulmer, P; Zenobi, R | 1 |
Hashimoto, K; Inoue, T; Matsuzaka, K; Shiba, K; Yoshinari, M | 1 |
Rinke, S; Roediger, M; Schäfer, S | 1 |
Fan, Y; Guo, G; Hagan, JL; Xu, X; Zhang, JF | 1 |
Aboushelib, MN; de Jager, N; Feilzer, AJ; Kleverlaan, CJ | 1 |
Gao, L; Huang, H; Li, J; Sun, J; Zhang, F | 1 |
Li, Q; Li, W; Swain, MV; Zhang, Z; Zhou, S | 1 |
Deng, QH; Liu, YH; Zhu, YH | 1 |
Bonfante, EA; Coelho, PG; Ferencz, JL; Martins, LM; Silva, NR; Thompson, VP; Valverde, GB | 1 |
Addison, O; Burke, FJ; Everson, P; Palin, WM | 1 |
Breedon, M; Jin, H; Miura, N | 1 |
John, E; Juhnke, M; Märtin, D | 1 |
Nakamura, T; Nishida, H; Ohnishi, H; Sekino, T; Tang, X; Usami, H; Wakabayashi, K; Yatani, H | 1 |
Bruno, FY; Diaz-Guillen, MR; Dura, OJ; Garcia- Barriocanal, J; Garcia-Hernandez, M; Leon, C; Nemes, NM; Pantelides, ST; Pennycook, SJ; Pennycook, TJ; Rivera-Calzada, A; Sanchez-Santolino, G; Santamaria, J; Schmidt, R; Sefrioui, Z; Varela, M | 1 |
Cekic-Nagas, I; Egilmez, F; Ergun, G; Lassila, LV; Vallittu, PK | 2 |
Ender, A; Hallmann, L; Hämmerlet, CH; Mehl, A; Ozcan, M; Stawarczyk, B | 1 |
Alghazzawi, TF; Bartolucci, AA; Essig, ME; Janowski, GM; Lemons, J; Liu, PR | 1 |
McLaren, EA; Polansky, JR; Sederstrom, D; Tan, JP; White, SN | 1 |
Gao, J; Gao, Y; Zhang, F | 1 |
Kukk, E; Lung, CY; Matinlinna, JP | 1 |
Giordano, R | 1 |
Harding, AB; Norling, BK; Teixeira, EC | 1 |
Braz Fernandes, FM; Laranjeira, P; Monteiro, RC; Perdigão, J; Pinto, AM; Veiga, JP | 1 |
Sato, T; Tada, K; Yoshinari, M | 1 |
Cuisinier, FJ; Durand, JC; Jacquot, B; Margerit, J; Salehi, H | 1 |
Ercoli, C; Feng, C; Lin, WS; Morton, D | 1 |
Kobayashi, A; Paraskevopoulos, KM; Subramanian, B; Yoganand, CP; Yugeswaran, S | 1 |
Butz, F; Knauf, M; Kohal, RJ; Larsson, B; Sahlin, H | 1 |
Alghazzawi, TF; Essig, ME; Janowski, GM; Lemons, J; Liu, PR | 2 |
Li, J; Li, W; Liao, YM; Lu, JJ; Zhang, JC; Zhao, YQ | 1 |
Adolfsson, E; Kanno, T; Milleding, P; Nakamura, K; Örtengren, U | 1 |
Heintze, SD; Mitov, G; Muecklich, F; Pospiech, P; Walz, S; Woll, K | 1 |
Hallmann, L; Hämmerle, CH; Reusser, E; Ulmer, P | 1 |
Liang, X; Liao, Y; Teng, J; Wang, H | 1 |
Lee, HW; Lee, JH; Lee, YR; Oh, EO; Park, SY; Prasad, DH; Son, JW; Whang, CM; Yoon, KJ | 1 |
Awad, MA; Elragi, AF; Hamed, MT; Marghalani, TY; Naguib, GH | 1 |
Bonfante, E; Coehlo, PG; Martins, LL; Rafferty, BT; Rekow, ED; Silva, NR; Thompson, VP; Zavanelli, RA | 1 |
Bonfante, EA; Coelho, PG; Hanan, JC; Rafferty, BT; Rekow, ED; Silva, NR; Thompson, VP | 1 |
Inoue, T; Kimura, Y; Matsuzaka, K; Yoshinari, M | 1 |
Hamano, N; Ino, S; Okada, S; Teranaka, T; Yamaguchi, H | 1 |
Hallmann, L; Hämmerle, CH; Ozcan, M; Roos, M; Stawarczyk, B; Trottmann, A | 1 |
Hamdemirci, N; Koroglu, BY; Parlar, O; Sari, T; Simsek, I; Usumez, A | 1 |
Fukada, M; Fukumura, T; Minegishi, K; Nagatsu, K; Suzuki, H; Tsuji, A | 1 |
Sakurai, K; Takano, T; Tasaka, A; Yoshinari, M | 1 |
Koneru, A; Li, J; Manivannan, A; Wu, N; Yang, F; Zhi, M | 1 |
Martínez-Rus, F; Pradíes, G; Rivera, B; Suárez, MJ | 1 |
Fazi, G; Ferrari, M; Vichi, A | 1 |
Brown, D; Chen, L; Chen, X; Suh, BI | 1 |
Esposito, L; Monaco, C; Scotti, R; Tucci, A | 2 |
Nakamura, T; Tan, Z; Tang, X; Yatani, H | 1 |
Bhatia, K; Ibbetson, R; Millen, C | 1 |
Fornefett, D; Gersdorff, N; Lange, K; Rinke, S; Roediger, M | 1 |
Cao, JK; Chu, BF; Xiao, R; Zhang, L | 1 |
Ahn, JS; Ju, SW; Jun, SH; Kim, JH; Kim, MJ; Oh, SH; Ryu, JJ; Seo, DG | 1 |
Berthold, C; Eder, K; Keuper, M; Nickel, KG | 1 |
Borgonovo, AE; Censi, R; Fabbri, A; Maiorana, C; Vavassori, V | 1 |
Jiang, S; Niu, Y; Shao, Z; Zhou, W; Zhu, Z | 1 |
Nazarian, A | 1 |
Corazza, PH; de Castro, HL; Della Bona, A; Paes-Júnior, Tde A | 1 |
George, A; Nijland, M; ten Elshof, JE; Veldhuis, SA | 1 |
deGroot, DA; Flinn, BD; Mancl, LA; Raigrodski, AJ | 1 |
Eiffler, C; Ohlmann, B; Rammelsberg, P | 1 |
Kusano, K; Okazaki, M; Satoda, T; Shimoe, S; Tanoue, N | 1 |
Kokubun, K; Saito, K; Sasaki, H; Watanabe, H; Yoshinari, M | 1 |
Carvalho, RM; Coelho, PG; Janal, MN; Lorenzoni, FC; Silva, NR; Thompson, VP; Valverde, GB; Weltemann, KD | 1 |
Finkelman, MD; Hirayama, H; Ishikawa-Nagai, S; Kumagai, N | 1 |
Kano, T; Kokubo, Y; Tsumita, M | 1 |
Almazdi, AA; Khajah, HM; Kim, H; Monaco, EA | 1 |
Aoki, H; Bhargava, S; Doi, H; Hanawa, T; Kasugai, S; Kondo, R | 1 |
Fleck, C; Fleckenstein, C; Frank, S; Maerten, A; Mochales, C; Mueller, WD; Traykova, T; Zehbe, R | 1 |
De Munck, J; Inokoshi, M; Kameyama, A; Minakuchi, S; Van Meerbeek, B | 1 |
Eliades, G; Kypraiou, V; Pelekanos, S | 1 |
Hwang, J; Schweiss, DT; Voyles, PM | 1 |
Goller, G; Sen, D; Tuncelli, B; Turp, V | 1 |
Koyama, T; Sato, T; Yoshinari, M | 1 |
Fleck, C; Fratzl, P; Maerten, A; Mochales, C; Mueller, WD; Traykova, T; Zaslansky, P | 1 |
de Almeida, AL; do Valle, AL; Insaurralde, E; Pereira, JR; Vidotti, HA | 1 |
Ambré, MJ; Aschan, F; Vult von Steyern, P | 1 |
Borges, AL; Corazza, PH; Della Bona, A; Feitosa, SA | 1 |
Adabo, GL; Almeida, AA; Domingues, NB; Longhini, D; Santos, C | 1 |
Honma, S; Ito, H; Saito, K; Sasaki, H; Yajima, Y; Yoshinari, M | 1 |
Komada, W; Miura, H; Omori, S; Yoshida, K | 1 |
Griffin, JD | 1 |
Alhasanyah, A; Flinton, RJ; Vaidyanathan, TK | 1 |
El-Hossary, MM; Ezzat, HA; Hamza, TA; Katamish, HA; Rosenstiel, SF; Shokry, TE | 1 |
Rabiei, A; Sandukas, S | 1 |
Chevalier, J; Coelho, PG; Douillard, T; Hjerppe, J; Kohal, RJ; Sanon, C; Silva, NR | 1 |
Brinck, T; Johansson, AJ; Jonsson, M; Lousada, CM | 1 |
Benetti, P; Borba, M; Della Bona, A; Duan, Y; Griggs, JA | 1 |
Handel, G; Preis, V; Rosentritt, M; Weiser, F | 1 |
Butz, F; Kohal, RJ; Patzelt, SB; Sahlin, H | 1 |
Aquilino, SA; Diaz-Arnold, AM; Gratton, DG; Lund, PS; Marinis, A; Qian, F; Stanford, CM | 1 |
Aguiar, TR; Cavalcanti, AN; de Oliveira, MT; de Sá Barbosa, WF; Francescantonio, MD; Giannini, M | 1 |
Bottino, MA; Massi, M; Nogueira, L; Ozcan, M; Queiroz, JR; Sobrinho, AS | 1 |
Anglada, M; Chintapalli, RK; Jimenez-Pique, E; Marro, FG | 1 |
Homma, S; Iijima, T; Sasaki, H; Sekine, H; Yajima, Y; Yoshinari, M | 1 |
Cekic-Nagas, I; Egilmez, F; Ergun, G; Lassila, LVJ; Ozcan, M; Vallittu, PK | 1 |
Arola, D; Lu, C; Wang, R; Zhang, D | 1 |
Ballester, RY; Cesar, PF; Meira, JB; Reis, BR; Swain, MV; Tanaka, CB; Versluis, A | 1 |
Asavapanumas, C; Leevailoj, C | 1 |
Bottino, MC; Cook, NB; Hara, AT; Luangruangrong, P; Sabrah, AH | 2 |
Godlewski, M; Godlewski, MM; Grzyb, J; Kaszewski, J; Mijowska, E; Narkiewicz, U; Pełech, I; Yatsunenko, S | 1 |
Kelly, JR; Megremis, S; Rungruanganut, P; Spink, LS | 1 |
Hasegawa, M; Sudo, A | 1 |
Becerra, N; Chang, A; Duan, H; Gregoire, JM; Small, LJ; van Dover, RB; Yuan, CC | 1 |
Baldissara, P; Fonseca, RG; Monaco, C; Querzè, M; Scotti, R | 1 |
Altmann, B; Att, W; Bächle, M; Butz, F; Chaar, S; Kohal, RJ; Renz, A | 1 |
Bazazan, A; Ganjali, A; Harati, MP; Jahanshahi, A; Sotoudeh, A; Takhtfooladi, MA | 1 |
Adhikari, S; Maiti, HS; Reddy, BS; Sarkar, D; Swain, SK | 1 |
Goller, G; Özcan, M; Sen, D; Tuncelli, B; Turp, V | 1 |
Bellinger, SL; Kay, HB; Keough, BE; Sager, RD | 1 |
Caputo, AA; McLaren, EA; Seto, KB; White, SN | 1 |
Cattani-Lorente, M; Karvonen, L; Kuebler, J; Pokrant, S; Rothbrust, F; Scherrer, SS; Yoon, S | 1 |
Behr, M; Handel, G; Letsch, C; Preis, V; Rosentritt, M; Schneider-Feyrer, S | 1 |
Anusavice, KJ; Clark, AE; Esquivel-Upshaw, JF; Shuster, JJ | 1 |
Chan, RN; Piascik, JR; Scattergood, RO; Stoner, BR; Thompson, JY | 1 |
Johansson, C; Kmet, G; Larsson, C; Rivera, J; Vult Von Steyern, P | 1 |
Elsaka, SE | 1 |
Finkelman, MD; Schaus, SE; Talua, NA; Zandparsa, R | 1 |
Amorim, EM; Bressiani, AH; Cesar, PF; Lazar, DR; Marchi, J; Ussui, V | 1 |
Clark, RJ; Darr, JA; Hyett, G; Quesada-Cabrera, R; Wang, XZ; Weng, X | 1 |
Miho, O; Nomoto, S; Okabayashi, S; Sato, T | 1 |
Biswas, K; Dhara, S; Mandal, D; Pandey, AK; Pati, F | 1 |
Ananth, KP; Balamurugan, A; Ferreira, JM; Mangalaraj, D; Suganya, S | 1 |
Aguilar, G; Binder, DK; Damestani, Y; Garay, JE; Hsu, MS; Kodera, Y; Park, BH; Rao, MP; Reynolds, CL; Szu, J | 1 |
Anami, LC; Bottino, MA; de Melo, RM; Macedo, VC; Valandro, LF | 1 |
Girvan, L; Li, KC; Prior, DJ; Swain, MV; Ting, S; van Vuuren, LJ; Waddell, JN | 1 |
Borges, T; Carvalho, Á; Carvalho, V; Dourado, C; Lima, T | 1 |
Lee, K; Lim, HP; Park, SW; Song, JY; Yun, KD | 1 |
Karlsson, S; Kvam, K | 1 |
Berthold, C; Keuper, M; Nickel, KG | 1 |
Amaral, M; Bottino, MA; Souza, RO; Valandro, LF | 1 |
Griggs, JA; Neidigh, J; Piascik, JR; Stoner, BR | 1 |
Atieh, M; Duncan, W; Ma, S; Osman, RB; Swain, MV | 1 |
Jing, Z; Ke, Z; Yihong, L; Zhijian, S | 1 |
Bartala, M; Contrepois, M; Laviole, O; Soenen, A | 1 |
Nemati, A; Rajabzadeh, G; Salehi, S; Solati Hashjin, M; Tavakoli, R | 1 |
Censi, P; Raso, M; Saiano, F | 1 |
Aktas, G; Lassila, L; Ozcan, M; Sahin, E; Vallittu, P | 1 |
Baldissara, P; de Oliveira Abi-Rached, F; dos Santos Nunes Reis, JM; Garcia Fonseca, R; Rambaldi, E | 1 |
Lee, K; Lim, HP; Park, JH; Park, S; Yun, KD | 1 |
Cesar, PF; Fukushima, KA; Mainjot, AK; Sadoun, MJ | 1 |
Amaral, M; Belli, R; Cesar, PF; Lohbauer, U; Petschelt, A; Valandro, LF | 1 |
Forster, A; Györgyey, Á; Kukovecz, Á; Nagy, K; Turzó, K; Ungvári, K | 1 |
Alipour, HM; Bayati, MR; Estrich, NA; Molaei, R; Narayan, J | 1 |
Chakraborty, M; Mantry, S; Mishra, BK | 1 |
Nomoto, S; Sato, T; Sugihara, N; Takuma, Y | 1 |
Bellucci, D; Cannillo, V; Sola, A | 1 |
Fukui, K; Ichiseki, T; Kaneuji, A; Matsumoto, T; Sugimori, T | 1 |
Beuer, F; Erdelt, KJ; Raith, S; Schneider, JM; Stawarczyk, B; Wimmer, T | 1 |
Ali Güngör, M; Cömlekoğlu, EM; Dündar-Çömlekoğlu, M; Hakan Sen, B; Kanat, B; Ozcan, M | 1 |
Albosefi, A; Finkelman, M; Zandparsa, R | 1 |
Blay, A; Cassoni, A; Miranda, PV; Rodrigues, JA; Shibli, JA | 1 |
Arantes-Oliveira, S; Portugal, J; Seabra, B | 1 |
Ding, Y; Guo, C; Guo, T; Lin, S; Liu, D; Qin, X; Yu, S | 1 |
Chen, C; Hsieh, SC; Kao, CK; Lee, SY; Lin, CK; Teng, NC; Yang, JC | 1 |
Akar, GC; Çal, E; Eskitaşçıoğlu, G; Özcan, M; Pekkan, G | 1 |
Burgess, JO; Givan, D; Karimipour-Saryazdi, M; Liu, PR; Ramp, LC; Sadid-Zadeh, R | 1 |
Farhat, IA; Guastaldi, AC; Menani, LR; Ribeiro, RF; Tiossi, R | 1 |
Byrne, JP; DeGrado, TR; Engelbrecht, HP; Packard, AB; Pandey, MK | 1 |
Kern, M; Sasse, M | 1 |
Linderoth, EH; Mahmood, DJ; Von Steyern, PV; Wennerberg, A | 1 |
Ng, J; Ruse, D; Wyatt, C | 1 |
Hallmann, L; Kern, M; Ulmer, P; Wille, S | 1 |
Cekic-Nagas, I; Egilmez, F; Ergun, G; Guru, M; Yilmaz, D | 1 |
da Silva, EM; Maia, LC; Miragaya, L; Sabrosa, CE | 1 |
Burrow, MF; Chen, C; Chen, G; Song, X; Xie, H; Zhang, F | 1 |
Behr, M; Hagemann, A; Hahnel, S; Preis, V; Rosentritt, M | 1 |
Cesar, PF; de Souza Santos, J; Lia Mondelli, RF; Ramos, CM; Sanches Borges, AF; Tabata, AS | 1 |
Bian, C; Kong, H; Wang, G; Zhang, S | 1 |
Chatchaiganan, M; Kanchanavasita, W; Suputtamongkol, K; Thanapitak, A; Triwatana, P | 1 |
Han, CH; Kim, S; Sung, M | 1 |
Aggarwal, A; de Souza, G; Hennig, D; Tam, LE | 1 |
Ayyildiz, S; Dikicier, S; Ozen, J; Sipahi, C | 1 |
Bello-Silva, MS; Cesar, PF; de Paula Eduardo, C; Maeda, FA; Miranda Junior, WG | 1 |
Bollero, P; Gherlone, E; Perfetti, F; Sorrentino, R; Traini, T; Zarone, F | 1 |
Kosmac, T; Oblak, C; Swain, MV; Verdenik, I | 1 |
Liu, S; Ran, R; Shao, Z; Su, C; Tade, MO; Wang, W; Zhao, B | 1 |
Callegari, GL; Dorneles, LS; Druck, CC; Pozzobon, JL; Valandro, LF | 1 |
Hegedus, C; Pétercsák, A; Radics, T | 1 |
Amer, R; Kateeb, E; Kürklü, D; Seghi, RR | 1 |
Akin, I; Cavalu, S; Goller, G; Ormanci, O; Sahin, F; Simon, V; Yucel, O | 1 |
El-Korashy, DI; El-Refai, DA | 1 |
Del Siena, F; Ferrari, M; Louca, C; Sedda, M; Vichi, A | 1 |
Amaral, M; Cesar, PF; Pereira, GK; Rocha, GC; Simoneti, R; Valandro, LF | 1 |
Aleisa, KI; Almufleh, BS; Morgano, SM | 1 |
Flores-Mir, C; Linke, B; Major, P; Nychka, JA; Passos, SP; Torrealba, Y | 1 |
Andersson, M; Chrcanovic, BR; Jimbo, R; Papia, E; Vult von Steyern, P | 1 |
Flores-Mir, C; Linke, B; Major, P; Nychka, JA; Passos, SP | 1 |
Andrikopoulos, KS; Kantiranis, N; Koidis, P; Kontonasaki, E; Paraskevopoulos, KM; Siarampi, E; Voyiatzis, GA; Zorba, T | 1 |
Anusavice, KJ; Clark, AE; Esquivel-Upshaw, JF; Mehler, A; Neal, D | 1 |
Chen, L; Hua, N; Zhu, H; Zhuang, J | 1 |
Hmaidouch, R; Lauer, HC; Müller, WD; Weigl, P | 1 |
Li, G; Ren, R | 1 |
Aydın, C; Bankoğlu Güngör, M; Gül, EB; Yılmaz, H | 1 |
Abedi, G; Fathi, MH; Haghdost, IS; Jahanshahi, A; Veshkini, A | 1 |
Ahmadi, H; Ghasemi, A; Ghavam, M; Kermanshah, H; Nateghifard, A; Torabzadeh, H; Zolfagharnasab, K | 1 |
Addison, O; Borges, AL; Costa, AK; Fleming, GJ | 1 |
Arata, A; Campos, TM; Lazar, DR; Lima, NB; Machado, JP; Tango, RN; Ussui, V | 1 |
Bahrami, G; Finlay, S; Isidor, F; Nicolaisen, MH | 1 |
Ćorić, D; Ćurković, L; Majić Renjo, M; Štefančić, S | 1 |
Abdoh Tabrizi, M; Ahmadi, H; Akhavan Zanjani, V; Alikhani, F; Ghasemi, A; Nateghifard, A; Razi, R; Torabzadeh, H | 1 |
Abi-Rached, Fde O; da Silva, FS; Fonseca, RG; Henriques, BA; Pinelli, LA | 1 |
Zhang, Y | 1 |
Koshihara, T; Murase, T; Nomoto, S; Sato, T; Shinya, A; Yasuda, H | 1 |
Aglarci, OS; Bilgin, MS; Erdem, A | 1 |
Kocjan, A; Kosmač, T; Samodurova, A; Swain, MV | 1 |
Cárdenas, E; Carrillo de Albornoz, A; De Sanctis, M; Ferrantino, L; Sanz, M; Vignoletti, F | 1 |
Arata, A; Bottino, MA; Cotes, C; Machado, JP; Melo, RM; Souza, RO | 1 |
Bottino, MC; Nishigori, A; Platt, JA; Yoshida, T | 1 |
Abi-Rached, FO; Campos, JA; Fonseca, RG; Martins, SB | 1 |
Barbosa, GA; das Neves, FD; de França, DG; Morais, MH | 1 |
Flinn, BD; Mancl, LA; Raigrodski, AJ; Singh, A | 1 |
Borchers, L; Bruns, M; Dellinger, P; Hübsch, C; Maier, HJ; Stemme, F; Stiesch, M | 1 |
Kamibayashi, H; Sueyoshi, H; Tokuda, M; Torii, M; Tsukada, G | 1 |
Dupriez, ND; Kunzelmann, KH; von Koeckritz, AK | 1 |
Barutcugil, C; Harorli, OT; Kapdan, A; Kirmali, O; Ozarslan, MM | 1 |
Campillo-Funollet, M; Muñoz, CA; Qeblawi, DM | 1 |
Ilie, N; Stawarczyk, B | 1 |
Burgess, JO; Janowski, GM; Lawson, NC; Lucas, TJ | 2 |
Bemfica, V; Canabarro, A; Lins, L; Queiroz, C | 1 |
Abi-Rached, FO; Adabo, GL; Baldissara, P; Fonseca, RG; Sciasci, P | 1 |
Collares, FM; Feitosa, VP; Moraes, RR; Ogliari, FA; Oliveira-Ogliari, A; Sauro, S | 1 |
Belli, R; Lohbauer, U; Petschelt, A; Wagner, A; Zorzin, J | 1 |
Er, K; Kapdan, A; Kirmali, O; Kustarci, A | 2 |
Anglada, M; Jimenez-Pique, E; Rueda, AO | 1 |
De Munck, J; Eliades, G; Inokoshi, M; Minakuchi, S; Naert, I; Van Meerbeek, B; Vanmeensel, K; Vleugels, J; Zhang, F | 1 |
Hori, N; Nakamura, M; Namba, S; Nishimiya, N; Toyama, T; Yamashita, K | 1 |
Cho, Y; Han, J; Hong, J; Kim, D; Park, J; Ryoo, H | 1 |
Majewska, J; Nakonieczny, D; Paszenda, Z; Walke, W | 1 |
Anglada, M; Camposilvan, E; Marro, FG; Mestra, A | 1 |
Han, JS; Kim, SH; Lee, JB; Yeo, IS; Yi, YJ; Yoon, HI | 1 |
Bernasconi, M; Özcan, M | 1 |
Batuk, M; Hadermann, J; Inokoshi, M; Naert, I; Van Meerbeek, B; Vanmeensel, K; Vleugels, J; Zhang, F | 1 |
Corazza, PH; Della Bona, A; Duan, Y; Griggs, JA; Kimpara, ET | 1 |
Amaral, M; Bottino, MC; Cesar, PF; Kleverlaan, CJ; Pereira, G; Valandro, LF | 1 |
Happe, A; Röling, N; Rothamel, D; Schäfer, A | 1 |
Klimek, L; Smielak, B | 1 |
Jiang, D; Liu, R; Shao, L; Sun, T; Zhang, Y | 1 |
Kim, GH; Lee, K; Lim, HP; Oh, GJ; Park, SW | 1 |
de Jager, N; de Kok, P; Feilzer, AJ; Kleverlaan, CJ; Kuijs, R | 1 |
Endo, K; Furuichi, Y; Hidaka, T; Ito, D; Kado, T; Nagano-Takebe, F | 1 |
Buyakov, A; Chatzinikolaidou, M; Hadjicharalambous, C; Kulkov, S; Mygdali, E; Prymak, O | 1 |
Capperucci, A; Carrabba, M; Ferrari, M; Louca, C; Sedda, M; Vichi, A | 1 |
Aydın, C; Bankoğlu Güngör, M; Karakoca Nemli, S; Turhan Bal, B; Yılmaz, H | 1 |
Amaral, M; Cesar, PF; May, LG; Otani, A; Valandro, LF | 1 |
Anglada, M; Camposilvan, E; Flamant, Q | 1 |
Abdulmajeed, AA; Donovan, TE; Lassila, LV; Närhi, TO; Ritter, AV; Sulaiman, TA; Vallittu, PK | 1 |
Bömicke, W; Ohlmann, B; Rammelsberg, P; Zenthöfer, A | 1 |
Frasca, LC; Lopes, R; Pimenta, MA; Rivaldo, E | 1 |
Amer, R; Johnston, W; Kürklü, D | 1 |
Akpinar, YZ; Aslan, MA; Demirtag, Z; Kepceoglu, A; Kılıc, HS; Usumez, A; Yavuz, T | 1 |
Campos, F; Dal Piva, AM; Gondim, LD; Özcan, M; Pereira, Lde L; Souza, RO | 1 |
Cesar, PF; Fracisconi, PA; Ramos, CM; Rubo, JH; Sanches Borges, AF; Tabata, AS | 1 |
Corazza, PH; de Castro, HL; Della Bona, A; Feitosa, SA; Kimpara, ET | 1 |
Atai, M; Bahramian, N; Naimi-Jamal, MR | 1 |
Bielen, V; Inokoshi, M; Minakuchi, S; Munck, JD; Naert, I; Van Meerbeek, B; Vanmeensel, K; Vleugels, J; Zhang, F | 1 |
Linke, B; Major, PW; Nychka, JA; Passos, SP | 2 |
Jakubowicz-Kohen, BD; Mainjot, AK; Najjar, A; Sadoun, MJ | 1 |
Balmer, M; Kohal, RJ; Patzelt, SB; Spies, BC; Vach, K | 1 |
Assunção Souza, RO; Bottino, MA; de Cássia Papaiz Gonçalves, F; Marques de Melo, RM | 1 |
Hasankhani, A; Matinlinna, JP; Mirmohammadi, H; Samimi, P | 1 |
Chen, C; Qian, M; Shen, S; Tay, FR; Xie, H; Zhang, F | 1 |
Larsson, C; Nordahl, N; Vult von Steyern, P | 1 |
Adolfsson, E; Harada, A; Kanno, T; Milleding, P; Nakamura, K; Niwano, Y; Ono, M; Örtengren, U; Shibasaki, H | 1 |
Bottino, MA; dos Santos, C; Kimpara, ET; Michida, SM; Özcan, M; Souza, RO | 1 |
De Munck, J; Inokoshi, M; Minakuchi, S; Naert, I; Nagaoka, N; Nakanishi, M; Van Meerbeek, B; Vanmeensel, K; Vleugels, J; Yoshida, Y; Yoshihara, K; Zhang, F | 1 |
Dolores Hernando, M; Fernández-Alba, AR; Ferrer, C; Herrera López, S; Rosal, R; Uclés, A | 1 |
Bansal, A; Byrne, JF; DeGrado, TR; Engelbrecht, HP; Packard, AB; Pandey, MK | 1 |
Ganapathy, P; Manivasagam, G; Natarajan, A; Rajamanickam, A | 1 |
Akin, H; Guneri, P; Kaval, ME | 1 |
Cesar, PF; da Cruz, NC; da Silva, EV; dos Santos, DM; Goiato, MC; Rangel, EC; Vechiato-Filho, AJ | 1 |
Ahn, JS; Lee, Y; Seo, DG; Yi, YA | 1 |
Andrade e Silva, F; Buarque e Silva, WA; De Souza, GM; Lameira, DP | 1 |
Dapieve, KS; Montagner, AF; Pereira, GKR; Silvestri, T; Soares, FZM; Valandro, LF; Venturini, AB | 1 |
Esteban, J; Gómez-Barrena, E; Horwat, D; Kinnari, TJ; Migot, S; Pérez-Jorge, C; Pérez-Tanoira, R | 1 |
Adolfsson, E; Al-Ahmad, A; Bernsmann, F; Chevalier, J; Fürderer, T; Hellwig, E; Karygianni, L; Kohal, RJ; Montanaro, L; Palmero, P; Schienle, S | 1 |
Allen, MJ; Durham, JW; Rabiei, A | 1 |
Chavali, R; Lawson, NC; Lin, CP | 1 |
Furuya, Y; Hirano, T; Honma, S; Miura, T; Sasaki, H; Yajima, Y; Yoshinari, M | 1 |
Furuya, K; Honma, S; Matsuzaki, F; Sekine, H; Takanashi, T; Yajima, Y; Yoshinari, M | 1 |
Harada, R; Hattori, M; Kawada, E; Oda, Y; Takemoto, S; Yoshinari, M | 1 |
Busscher, HJ; Ren, Y; Rustema-Abbing, M; van der Mei, HC; Zhao, B | 1 |
Amaral, M; Bottino, MA; Pereira, GK; Ramos, GF; Valandro, LF | 1 |
Chen, J; Wang, B; Wang, R; Zhang, Y | 1 |
Amaral, M; Bottino, MA; Cesar, PF; Lohbauer, U; Valandro, LF | 1 |
Bonfante, EA; Borges, AF; Cesar, PF; Ramos, CM; Rubo, JH; Wang, L | 1 |
Chen, C; Gu, Y; Li, Q; Qian, M; Tay, FR; Xie, H; Zhang, F | 1 |
Canneto, JJ; Cattani-Lorente, M; Durual, S; Scherrer, SS; Wiskott, AH | 1 |
Chen, C; Li, Q; Lu, Y; Qian, M; Tay, FR; Xie, H; Zhang, F | 1 |
Amez-Droz, M; Cattani-Lorente, M; Durual, S; Scherrer, SS; Wiskott, HW | 1 |
Eliades, G; Kaitsas, V; Pilo, R; Zinelis, S | 1 |
Cotič, J; Jevnikar, P; Kocjan, A; Kosmač, T | 1 |
Arioli Filho, JN; Basílio, MA; Cesar, PF; Delben, JA; Rizkalla, AS; Santos Junior, GC | 1 |
Bömicke, W; Krisam, J; Rammelsberg, P; Rues, S; Schürz, A | 1 |
Amaral, M; Kleverlaan, CJ; Pereira, GKR; Rippe, MP; Silvestri, T; Valandro, LF | 1 |
Akay, C; Çakırbay Tanış, M; Şen, M | 1 |
Fraga, S; Freitas, M; Kleverlaan, CJ; May, LG; Pereira, GKR; Valandro, LF | 1 |
Kleverlaan, CJ; Muller, C; Pereira, GKR; Rippe, MP; Valandro, LF; Wandscher, VF | 1 |
Antonio, SG; Arioli Filho, JN; Basílio, Mde A; Cardoso, KV; Rizkalla, AS; Santos Junior, GC | 1 |
De Munck, J; Inokoshi, M; Minakuchi, S; Naert, I; Pongprueksa, P; Van Meerbeek, B; Vanmeensel, K; Vleugels, J; Zhang, F | 1 |
Amaral, M; Camargo, R; Kleverlaan, CJ; Pereira, GK; Rippe, MP; Silvestri, T; Valandro, LF | 1 |
Helvacioglu, DY; Pekkan, G; Pekkan, K; Saridag, S | 1 |
Jiazhen, Y; Ning, L; Qiang, Z; Wenbo, L; Yanan, Z | 1 |
Bahrami, L; Fereydouni, S; Khoshnavazi, R | 1 |
Brugnera, A; Cassoni, A; Kushima, SS; Nagasawa, M; Rodrigues, JA; Shibli, JA | 1 |
Gao, JH; Gao, Y; Zhang, FQ | 1 |
Aurélio, IL; Marchionatti, AM; May, LG; Montagner, AF; Soares, FZ | 1 |
Blay, A; Cassoni, A; Cesar, PF; Cruz, A; Gehrke, SA; Pasqua-Neto, JD; Rodrigues, JA; Shibli, JA; Simões, CO; Soares, RD | 1 |
Al Qahtani, MS; Al Qahtani, WM; Engel, E; Geis-Gerstorfer, J; Rupp, F; Scheideler, L; Schille, C; Spintzyk, S | 1 |
Aguilar, G; Cabrales, P; Damestani, Y; Galan-Hoffman, DE; Ortiz, D | 1 |
Cui, C; Qian, H; Su, T; Sun, J; Zhang, F | 1 |
Boukamp, BA; Cadafalch Gazquez, G; Chen, H; Moroni, L; Mota, C; Solmaz, A; Ten Elshof, JE; van Blitterswijk, CA; Veldhuis, SA | 1 |
Nomoto, S; Ogino, Y; Sato, T | 1 |
Aguilar, G; Damestani, Y; De Howitt, N; Garay, JE; Halaney, DL | 1 |
Alghazzawi, TF; Janowski, GM | 1 |
Liao, Y; Lu, X; Shen, J; Su, N; Wang, H; Yue, L; Zhang, H | 1 |
Fraga, S; Kleverlaan, CJ; Montagner, AF; Pereira, GKR; Soares, FZM; Valandro, LF | 1 |
Antonio, SG; Candido, LM; Fais, LM; Gimenes Olbera, AC; Miotto, LN; Pinelli, LA | 1 |
Nakamura, T; Nakano, Y; Ohnishi, H; Sekino, T; Usami, H; Wakabayashi, K; Yatani, H | 1 |
Bagheri, H; Karami, P; Madani, A; Nakhaei, M; Rajabzadeh, G; Salehi, S | 1 |
Allen, MJ; Durham, JW; Guda, T; Montelongo, SA; Ong, JL; Rabiei, A | 1 |
Cogun, C; Esen, Z; Gurun, H; Kucukturk, G; Rona, N; Yenisey, M | 1 |
Bahr, DF; De Souza, GM; Ghahnavyeh, RR; Lawrence, SK; Zykus, A | 1 |
Aminian, A; Azizi, Z; Hildebrand, N; Maas, M; Maedler, K; Rezwan, K; Shirzadi, B; Treccani, L; Volkmann, E | 1 |
Aivazi, M; HashemiBeni, B; Hossein Fathi, M; Matinlinna, JP; Mortazavi, V; Nejatidanesh, F; Savabi, O | 1 |
Batuk, M; Hadermann, J; Inokoshi, M; Naert, I; Van Meerbeek, B; Vleugels, J; Zhang, F | 1 |
Guilardi, LF; Gündel, A; Pereira, GKR; Rippe, MP; Valandro, LF | 1 |
Borges, AF; Duan, Y; Gonzaga, CC; Griggs, JA; Rezende, CE; Rubo, JH | 1 |
Arola, DD; Bollen, AM; Cook, BK; Fong, H; Raigrodski, AJ; Stout, MM | 1 |
Fais, LMG; Hatanaka, GR; Pinelli, LAP; Polli, GS; Reis, JMDSN | 1 |
Arai, M; Tagami, J; Takagaki, T; Takahashi, A | 1 |
Akbar, SA; Pingguan-Murphy, B; Soon, G | 1 |
Basting, RT; Miranda, ME; Soares, C; Soares, LM | 1 |
Aziz, A; Carrabba, M; Fabian Fonzar, R; Ferrari, M; Keeling, AJ; Vichi, A; Wood, D | 1 |
Fraga, S; Guilardi, LF; May, LG; Pereira, GKR; Valandro, LF; Zucuni, CP | 1 |
Cakir-Omur, T; Gozneli, R; Ozkan, Y | 1 |
Babasafari, M; Jamshidian, M; Mohammadi-Bassir, M; Rezvani, MB | 1 |
Antonio, SG; Candido, LM; Fais, LMG; Hatanaka, GR; Pinelli, LAP; Ryan, DPO | 1 |
He, F; Ke, J; Ye, J | 1 |
Antunes Guimarães, JG; da Silva, EM; Guimarães, RB; Miragaya, LM; Santos Botelho, GD; Souza, ROAE | 1 |
Cottam, MA; Gross, MD; Muhoza, SP | 1 |
Guo, J; Liu, HG; Zhu, HS; Zhu, J | 1 |
Amaral, M; Bottino, MA; Melo, RM; Pereira, GKR; Valandro, LF; Villefort, RF; Zhang, Y | 1 |
Cotič, J; Jevnikar, P; Kocjan, A | 1 |
Dorneles, LS; Pereira, GKR; Pozzobon, JL; Valandro, LF; Wandscher, VF | 1 |
Adabo, GL; Almeida, AA; Fonseca, RG; Galvão Rabelo Caldas, MR; Galvão Ribeiro, BR | 1 |
Batuk, M; Chevalier, J; Hadermann, J; Olagnon, C; Van Meerbeek, B; Vleugels, J; Zhang, F | 1 |
Choi, J; Kang, J; Lawson, N; McLaren, EA; Trujillo, C | 1 |
Anami, LC; Bonfante, EA; Bottino, MA; Chun, EP | 1 |
Aida, J; Egusa, H; Izumida, A; Kasahara, S; Miura, S; Okuyama, Y; Yamauchi, S | 1 |
Chee, W; Ronaghi, G; Yeung, S | 1 |
Bömicke, W; Ohlmann, B; Rammelsberg, P; Rathmann, F | 1 |
Cune, MS; De Hosson, JTM; Ocelík, V; Rasoul, HH; Schepke, U | 1 |
Arena, A; Baldissara, P; Llukacej, A; Monaco, C; Scotti, R | 1 |
Aguilar, G; Garay, JE; Gutierrez, MI; Leija, L; Penilla, EH; Vera, A | 1 |
Bhave, A; Chughtai, M; Jawad, M; Khlopas, A; Mont, MA; Newman, JM; Sodhi, N | 1 |
Amaral, M; Bottino, MA; Fraga, S; Kleverlaan, CJ; May, LG; Valandro, LF | 1 |
Guilardi, LF; Pereira, GKR; Rippe, MP; Valandro, LF; Zucuni, CP | 1 |
Roy, ME; Sebastian, AM; Whiteside, LA | 1 |
Alharbi, N; Huiberts, D; Osman, RB; van der Veen, AJ; Wismeijer, D | 1 |
Chen, C; Chen, Y; Lu, Z; Qian, M; Xie, H; Zhang, H | 1 |
Cesar, PF; Favero, SS; Lima, E; Lohbauer, U; Miranda, RBP; Silva, LHD | 1 |
Deng, B; Jiang, D; Lai, X; Shao, L; Si, W; Sun, T | 1 |
Jessen, LK; Kaidas, V; Kern, M; Wille, S; Zumstrull, P | 1 |
Edwards Rezende, CE; Griggs, JA; Macedo, RM; Rubo, JH; Sanches Borges, AF | 1 |
Chen, C; Chen, Y; Lu, Z; Qian, M; Tay, FR; Xie, H; Zhang, H | 1 |
Arantes, RVN; Carbonari, MJ; Cestari, TM; Martins, R; Oliveira, RC; Santos, PS; Taga, R | 1 |
Meyer, S; Rohr, N; Zaugg, LK; Zehnder, I; Zitzmann, NU | 1 |
Bottino, MA; Melo, RM; Pereira, GKR; Prado, RD; Valandro, LF | 1 |
Godoy-Ruiz, L; Martínez-Rus, F; Moreno-Hay, I; Özcan, M; Pradíes, G | 1 |
Chen, C; Chen, Y; Cheng, Y; Qian, M; Xia, Y; Xie, H | 1 |
Chaofang, D; Helin, X; Jinshuang, W; Lei, Z; Sefei, Y; Zhe, W | 1 |
Abi-Rached, FO; Adabo, GL; Baldissara, P; Fonseca, RG; Martins, SB | 1 |
Bitencourt, SB; de Mello, CC; Dos Santos, DM; Goiato, MC; Pellizzer, EP; Pesqueira, AA | 1 |
Guilardi, LF; Pereira, GKR; Rippe, MP; Valandro, LF; Wandscher, VF | 1 |
Geis-Gerstorfer, J; Sawada, T; Schille, C; Schweizer, E; Spintzyk, S; Zöldföldi, J | 1 |
Burgess, JO; Kwon, SJ; Lawson, NC; McLaren, EE; Nejat, AH | 1 |
Farzin, M; Khaledi, AAR; Orandi, S; Pirouzi, S; Vojdani, M | 1 |
Cheng, Y; Guo, M; He, P; Lai, R; Liu, X; Ma, S; Ou, L; Sun, T | 1 |
Ballamurugan, AM; Kannan, S; Meenakshi, K; Nivedha, V; Vasanthavel, S | 1 |
Bottino, MA; Carvalho, RLA; Dal Piva, AMO; Lima, AL; Melo, RM; Valandro, LF | 1 |
Carter, JC; Morrison, SS; Murray, NJ; O'Hara, MJ | 1 |
Camposilvan, E; Chevalier, J; Ferrari, M; Gremillard, L; Leone, R; Sorrentino, R; Zarone, F | 1 |
Chang, L; Feng, K; Guan, S; Luo, Y; Song, X; Wang, J; Wang, L; Zhu, S | 1 |
Babu, S; Jain, RB; Jain, T; Kaur, C; Khan, ZA; Porwal, A | 1 |
Carvalho, A; Cesar, PF; Fernandes, MH; Grenho, L; Miranda, RBP; Monteiro, FJ | 1 |
Aurélio, IL; Marchionatti, AME; May, LG | 1 |
Dos Santos, AF; Furuse, AY; Lisboa-Filho, PN; Sanches Borges, AF; Sandes de Lucena, F | 1 |
Arola, D; Øilo, M | 1 |
Amaral, M; Guilardi, LF; Pereira, GKR; Silvestri, T; Valandro, LF; Weitzel, ISSL | 1 |
Antunes, MCF; Assunção E Souza, RO; Carvalho, RF; Carvalho, RLA; Kimpara, ET; Leite, FPP; Miranda, JS | 1 |
Chen, YC; Chuang, SF; Hsieh, JP; Hwang, CS; Kang, LL; Liu, YC | 1 |
Dapieve, KS; Guilardi, LF; Kleverlaan, CJ; Pereira, GKR; Rippe, MP; Valandro, LF | 1 |
Ghassemi, A; Hasegawa, M; Hirota, M; Ishijima, M; Nakhaei, K; Ogawa, T; Okubo, T; Park, W; Rezaei, NM; Tahsili, T; Taniyama, T | 1 |
Barbosa Dantas, DC; Bresciani, E; Rocha Lima Huhtala, MF; Vilas Boas Fernandes Júnior, V | 1 |
Gong, X; Li, SB; Wu, B; Wu, YL; Zhang, CB; Zhao, XY | 1 |
Chen, BZ; Chen, Y; He, F; Xie, HF; Yang, L; Zhang, HQ | 1 |
Anglada, M; Jiménez-Piqué, E; Mücklich, F; Roitero, E | 1 |
Jiao, T; Sun, J; Zhu, Z; Zhuang, Y | 1 |
Burchovetskiy, V; Danilenko, I; Konstantinova, T; Lakusta, M; Loladze, L; Volkova, G | 1 |
Carter, JC; Kellogg, CM; Link, JM; Murray, NJ; O'Hara, MJ | 1 |
Aslan, YU; Ates, SM; Boztoprak, Y; Caglar, I; Duymus, ZY | 1 |
Dapieve, KS; Guilardi, LSF; Pereira, GKR; Rippe, MP; Silvestri, T; Valandro, LF | 1 |
Barão, VAR; Bitencourt, SB; da Cruz, NC; da Silva, EVF; de Souza, GM; Dos Santos, DM; Goiato, MC; Pesqueira, AA; Rangel, EC | 1 |
Abi-Rached, FO; Góes, MS; Hatanaka, GR; Polli, GS; Reis, JMDSN | 1 |
Att, W; Haro Adanez, M; Nishihara, H | 1 |
Campos, F; de Jager, N; Fraga, S; Kleverlaan, CJ; Valandro, LF | 1 |
Butler, S; Linke, B; Torrealba, Y | 1 |
Gahlert, M; Roehling, S; Schlegel, KA; Woelfler, H | 1 |
Botelho Dos Santos, G; Cesar, PF; Elias, AB; Moreira da Silva, E; Prado, M; Simão, RA | 1 |
Fujiwara, A; Gu, H; Marin, E; Nakashima, S; Nishiike, N; Pezzotti, G; Sugano, N; Zhu, W | 1 |
Borges, ALS; Campos, TMB; de Melo, RM; Prado, PHCO; Ramos, GF; Reis, AFNE; Vasconcelos, G | 1 |
Bakitian, F; Larsson, C; Papia, E; Seweryniak, P; Vult von Steyern, P | 1 |
Arata, A; Campos, F; Dal Piva, AM; Gondim, LD; Ribeiro, IL; Souza, RO; Tribst, JP | 1 |
Irie, M; Matsumoto, T; Okada, M; Taketa, H; Torii, Y | 1 |
Baimpas, N; Chater, P; Kleppe, A; Korsunsky, AM; Lunt, AJG; Neo, TK | 1 |
Prochnow, C; Rocha Pereira, GK; Valandro, LF; Venturini, AB; Zucuni, CP | 1 |
Endo, K; Hong, G; Luo, F; Matsui, H; Sasaki, K; Wan, Q | 1 |
Donmez, MB; Gezer, T; Okutan, Y; Yucel, MT | 1 |
Duran, I; Ergun Kunt, G | 1 |
Egusa, H; Kasahara, S; Miura, S; Sun, J; Yamauchi, S | 1 |
Noel, OF; Roy, ME; Whiteside, LA | 1 |
Lin, Y; Wu, Y; Xu, J | 1 |
Cordeiro, WJB; Fonseca, EM; Martins, FV; Mattos, CT | 1 |
Bottino, MC; Dapieve, KS; Pereira, GKR; Rippe, MP; Valandro, LF; Zucuni, CP | 2 |
Kaizer, MR; Kim, DK; Kolakarnprasert, N; Zhang, Y | 1 |
Elsayed, A; Kern, M; Meyer, G; Wille, S | 1 |
Harai, T; Hayakawa, T; Hirota, M; Ishibashi, S; Mizutani, M | 1 |
Franco-Tabares, S; Hjalmarsson, L; Johansson, CB; Stenport, VF; Tam, PL | 1 |
Albuquerque, PPAC; Cesar, PF; Duarte, MFB; Moraes, RR; Moreno, MBP; Rodrigues Filho, LE; Schneider, LFJ | 1 |
Jansen, JU; Letz, I; Lümkemann, N; Pfefferle, R; Sener, B; Stawarczyk, B | 1 |
Bastos, NA; Borges, AFS; Costa, BC; Foschini, C; Francisconi, PAS; Furuse, AY; Gerlin Neto, V; Icochea, AL; Lisboa-Filho, PN; Zens, MA | 1 |
Akebono, H; Murayama, T; Peng, TY; Satoda, T; Shimoe, S; Tanoue, N | 1 |
Hara, ES; Irie, M; Matsumoto, T; Okada, M; Taketa, H; Torii, Y | 1 |
Fredel, M; Henriques, B; Madeira, S; Mesquita-Guimarães, J; Ribeiro, P; Silva, FS; Soares, D; Souza, JCM | 1 |
Bakopoulou, A; Koidis, P; Pandoleon, P; Papadopoulou, L | 1 |
Ashida, M; Chen, P; Doi, H; Hanawa, T; Nakaishi, M; Oishi, M; Tsutsumi, Y | 1 |
Ballester, RY; Jikihara, AN; Meira, JBC; Swain, MV; Tanaka, CB; Versluis, A | 1 |
Aguilar, G; Cano-Velázquez, MS; Davoodzadeh, N; Garay, JE; Halaney, DL; Sabzeghabae, A; Uahengo, G | 1 |
Cadore-Rodrigues, AC; Foletto, EL; Jahn, SL; Oliveira, JS; Pereira, GKR; Prochnow, C; Rippe, MP; Valandro, LF | 1 |
Aguilar, G; Binder, DK; Cano-Velázquez, MS; Davoodzadeh, N; Halaney, DL; Jonak, CR | 1 |
Oguz Ahmet, BS; Okutan, Y; Ozdere, E; Sayin Ozel, G | 1 |
Dayap, B; Exarhos, S; Liu, H; Mangolini, L; Mariano, C; Niacaris, M; Rutherford, D; Xu, C | 1 |
Abu Ruja, M; De Souza, GM; Finer, Y | 1 |
Özcan, M; Pekkan, G; Subaşı, MG | 1 |
Bayindir, BÇ; Karasu, B; Özcan, M; Pekkan, G; Pekkan, K | 1 |
Alshamrani, AA; De Souza, GM | 1 |
Baimpas, N; Dolbnya, I; Korsunsky, AM; Lunt, A; Neo, TK; Salvati, E | 1 |
Alarifi, S; Ali, D; Alzahrani, FM; Katubi, KMS | 1 |
Bittar, BF; de Carvalho Ramos, N; Leite, FPP; Machado, JPB; Miranda, JS; Simões, AC; Souza, ROA; Zhang, Y | 1 |
Hirata, I; Iwaguro, S; Murayama, T; Satoda, T; Shimoe, S | 1 |
Barreto, SC; de Goes, MF; de Souza, GM; Hajhamid, B; Lima, RBW | 1 |
Campos, TMB; de Melo, RM; Monteiro, JB; Prado, PHCO; Thim, GP | 1 |
Kim, TG; Lee, KW; Lim, MJ; Yu, MK | 1 |
Figueiredo, VMG; Massi, M; Nogueira Junior, L; Prado, RFD; Queiroz, JRC; Silva Sobrinho, ASD; Silva, AM | 1 |
Altan, B; Cinar, S; Tuncelli, B | 1 |
Chevalier, J; Müller, WD; Reveron, H; Spies, BC; van Meerbeek, B; Vleugels, J; Wesemann, C; Zhang, F | 1 |
Hawsawi, RA; Miller, CA; Moorehead, RD; Stokes, CW | 1 |
Aguiar, FHB; Barreto, SC; de Souza, GMD; Lima, RBW; Paulillo, LAMS; Santos, CTD | 1 |
Botelho, MG; Lam, WYH; Luk, HWK; Shih, K; Wang, Y; Øilo, M | 1 |
Abdulmajeed, A; Bencharit, S; Talmazov, G; Veilleux, N | 1 |
Hong, G; Xu, YL; Yang, H; Yu, H | 1 |
Benalcázar Jalkh, EB; Bergamo, ETP; Bonfante, EA; Bortolin, F; Cesar, PF; Coelho, PG; Genova, LA; Lisboa Filho, PN; Lopes, ACO; Monteiro, KN; Piza, MMT; Santos, CF | 1 |
Lümkemann, N; Stawarczyk, B; Wrzesień, M | 1 |
Hesaraki, S; Karimi, M; Nezafati, N | 1 |
Ahmed, WM; Carvalho, RM; McCullagh, AP; Stojkova, BJ; Troczynski, T; Wyatt, CC | 1 |
Burgo, TAL; Cadore-Rodrigues, AC; Foletto, EL; Jahn, SL; Oliveira, JS; Pereira, GKR; Prochnow, C; Rippe, MP; Valandro, LF | 1 |
Kim, WC; Lee, JK | 1 |
Kim, DS; Lee, JK | 2 |
Bottino, MA; Campos, TMB; Matos, JDM; Melo, RM; Ramos, NC; Souza, ROA; Thim, GP; Valandro, LF | 1 |
Ilha, BD; May, LG; May, MM; Valandro, LF; Zucuni, CP | 1 |
Bergfeldt, T; Fretwurst, T; Gross, C; Nelson, K; Rothweiler, R; Stricker, A | 1 |
Faria, ACL; Fiorin, L; Moris, ICM; Ribeiro, RF; Rodrigues, RCS | 1 |
Abdulmajeed, AA; Bencharit, S; Deeb, JG; Elkharashi, A; Grzech-Leśniak, K | 1 |
Anglada, M; Belli, R; Cicconi, MR; de Ligny, D; Lohbauer, U; Loher, C; Petschelt, A | 1 |
Amarante, JEV; De Souza, GM; Pais Alves, MFR; Santos, CD; Simba, BG; Soares Pereira, MV | 1 |
Benalcazar Jalkh, EB; Bergamo, ETP; Bonfante, EA; Borges, AFS; Campos, TMB; Cesar, PF; Coelho, PG; Genova, LA; Lima, E; Lisboa-Filho, PN; Lopes, ACO; Monteiro, KN; Witek, L | 1 |
Chen, S; Gruber, M; Liao, Y; Lukic, H; Megremis, S | 1 |
Ito, T; Miura, T; Mori, G; Oda, Y; Sasaki, H; Yajima, Y; Yoshinari, M | 1 |
Eichberger, M; Jerman, E; Reichert, A; Stawarczyk, B; Wiedenmann, F | 1 |
Chen, B; Chen, C; Meng, H; Xie, H; Yan, Y; Zhang, H | 1 |
Hong, G; Matsui, H; Sasaki, K; Song, YJ; Sun, L | 1 |
Barkarmo, S; Egusa, H; Harada, A; Inagaki, R; Kanno, T; Nakamura, K; Örtengren, U; Shishido, S | 1 |
Abdelaal, M; Dawson, DV; Denry, I; Holloway, JA; Kelly, JR | 1 |
Benalcázar Jalkh, EB; Bergamo, ETP; Bonfante, EA; Campos, TMB; Cesar, PF; de Araújo-Júnior, ENS; Lopes, ACO; Monteiro, KN; Tanaka, R; Tognolo, FC | 1 |
Aurélio, IL; Marchionatti, AME; Wandscher, VF | 1 |
Alsadon, O; Patrick, D; Pollington, S; Wood, D | 1 |
Borba, M; Kaizer, MR; Kim, D; Vardhaman, S; Zhang, Y | 1 |
Alves, LMM; Bottino, MA; Costa, AKF; Lobo, CMM; Melo, RM; Özcan, M; Sacorague, SCMC; Silva, NRD; Souza, ROAE | 1 |
Guilardi, LF; Machado, PS; Pereira, GKR; Rippe, MP; Rodrigues, CDS; Valandro, LF | 1 |
Rocha, MG; Roulet, JF; Schepker, KL; Schwarz, HC; Truco, A | 1 |
Cotič, J; Jevnikar, P; Kocjan, A; Kosmač, T; Panchevska, S | 1 |
Almeida Fonseca, SS; Antunes Guimarães, JG; Barquete, CG; Elias, AB; Herrera, EZ; Mello, A; Moreira da Silva, E; Simão, RA | 1 |
Ghatee, M; Manafi, S; Mohammadi, M; Naseri, H; Yazdani, A | 1 |
Carrico, C; Deeb, JG; Grzech-Leśniak, K; Kanduti, D; Saturno, AM; Skrjanc, L | 1 |
Agingu, C; Tsoi, JKH; Yu, H; Zhang, CY | 1 |
Lou, Y; Lu, Y; Mei, Z; Sun, M; Tan, X; Yu, H; Yu, P; Yue, L; Zhang, J | 1 |
Aboushelib, M; Elraggal, A; Silikas, N | 1 |
Hayashi, S; Hirano, T; Homma, S; Iijima, N; Iijima, T; Nakano, R; Yajima, Y | 1 |
Anami, LC; Ismatullaev, A; Kaizer, MDR; Luz, JN; Ramos, NC; Saavedra, GSFA; Taşın, S; Thompson, VP; Usumez, A; Zhang, Y | 1 |
Gupta, N; Kumar, S; Malhotra, BD | 1 |
Kawano, A; Nakamura, T; Nishida, H; Okamura, S; Sekino, T; Tamiya, S; Wakabayashi, K | 1 |
Eichberger, M; Hampe, R; Jerman, E; Lümkemann, N; Stawarczyk, B | 1 |
Amiard, F; Bekaert, S; Chevalier, J; Dardenne, N; Djaker, N; Douillard, T; Dupont, N; Koenig, V; Lamy de la Chapelle, M; Le Goff, S; Mainjot, A; Vanheusden, A; Wulfman, C | 1 |
Chen, CY; Kim, DM; Pham, CM | 1 |
Cadore-Rodrigues, AC; Dorneles, LS; Jahn, SL; Machado, PS; Oliveira, JS; Pereira, GKR; Rippe, MP; Valandro, LF | 1 |
Grambow, J; Kern, M; Wille, S | 1 |
Deste Gökay, G; Durkan, R; Şimşek, H; Yilmaz, B | 1 |
Juntavee, A; Juntavee, N; Plongniras, P | 1 |
Berrios, M; Bilgili, E; Guner, G; Kannan, M | 1 |
Agustín-Panadero, R; Fons-Badal, C; Montiel-Company, JM; Rico-Coderch, A; Solá-Ruíz, MF; Verdejo-Solá, B | 1 |
Inokoshi, M; Liu, H; Minakuchi, S; Nakai, H; Nozaki, K; Shimizubata, M; Too, TDC | 1 |
Caramês, JMM; Carvalho, Ó; da Cruz, MB; da Mata, ADSP; Fernandes, BF; Madeira, S; Marques, JF; Pinto, P; Silva, FS | 1 |
Haugli, K; Kvam, K; Ruud, A; Rønold, HJ; Ulsund, AH; Øilo, M | 1 |
Abreu, JLB; Benalcázar Jalkh, EB; Bergamo, ETP; Bonfante, EA; Campos, TMB; Canteenwala, A; Cesar, PF; Coelho, PG; Genova, LA; Lisboa-Filho, PN; Lopes, ACO; Monteiro, KN; Witek, L | 1 |
Bao, R; Ding, Q; Li, WJ; Sun, FB; Yuan, FS; Zhang, L; Zheng, JQ | 1 |
Bastos-Bitencourt, NA; Bitencourt, SB; De Souza, GM; Hatton, BD; Soares Bombonatti, JF | 1 |
Kong, MC; Park, MG | 1 |
Barkarmo, S; Nakamura, K; Niklasson, A; Örtengren, U; Shishido, S; Svanborg, P; Tarkeshi, A | 1 |
Bastos-Bitencourt, NA; Bitencourt, SB; Bonfante, EA; da Cruz, NC; De Souza, GM; Dos Santos, DM; Pesqueira, AA; Rangel, EC | 1 |
Attia, MA; Shokry, TE | 1 |
Kantiranis, N; Koidis, P; Kontonasaki, E; Papadopoulou, L; Sarafidou, K; Siarampi, E | 1 |
Alfrisany, NM; De Souza, GM | 1 |
Baltazar, J; Martins, MA; Olhero, S; Rodrigues Pais Alves, MF; Santos, C; Torres, PMC | 1 |
Cho Too, TD; Inokoshi, M; Liu, H; Minakuchi, S; Nakai, H; Nozaki, K; Shimizubata, M | 1 |
Agingu, C; Cheng, H; Yang, H; Yu, H; Zhang, CY | 1 |
Andrés-Sanz, D; Di Silvo, D; Diamanti, E; Gurauskis, J; López-Gallego, F | 1 |
Kwon, WC; Park, MG | 1 |
Candido, LM; Ferreira, EB; Pinelli, LAP | 1 |
Birand, C; Kurtulmus-Yilmaz, S | 1 |
Bastos-Bitencourt, NA; Bitencourt, SB; De Souza, GM; Dos Santos, DM; Hatton, BD; Pesqueira, AA | 1 |
Alfrisany, N; Hajhamid, B; Somogyi-Ganss, E | 1 |
López-García, S; Pérez-López, J; Raigrodski, AJ; Revilla-León, M; Rodríguez-Lozano, FJ; Sánchez-Bautista, S | 1 |
Bastos, TMC; Benalcázar Jalkh, EB; Bergamo, ETP; Bonfante, EA; Cesar, PF; de Araújo-Júnior, ENS; Lopes, ACO; Migliati, R; Monteiro, KN; Tanaka, R; Tognolo, FC | 1 |
Hahnel, S; Hoelzig, H; Kloess, G; Koenig, A; Rosentritt, M; Schmidt, MB; Wertz, M | 1 |
Alves, MFRP; Cipriano da Silva, P; Coutinho, IF; Moreira, LP; Santos, CD; Strecker, K | 1 |
A Sulaiman, T; Badr, Z; Culp, L; Duqum, I; Lim, CH; Zhang, Y | 1 |
Li, Y; Liu, XQ; Lyu, JZ; Tan, JG | 1 |
Čokić, SM; Cóndor, M; Inokoshi, M; Meerbeek, BV; Oosterwyck, HV; Vleugels, J; Zhang, F | 1 |
Campos, TMB; Dapieve, KS; Melo, RM; Prado, PHCO; Valandro, LF | 1 |
Bottino, MA; Caneppele, TMF; Dal Piva, AMO; Madruga, CFL; Pereira, GKR; Valandro, LF | 1 |
Aguilar, G; Bon, J; Camacho-López, S; Cano-Velázquez, MS; Hernández-Cordero, J; Llamazares, M; Trujillo, M | 1 |
Aguilar, G; Chen, Y; Garay, JE; Halaney, DL; Huang, A; Hung, C; Liu, HH; Mangolini, L; Rudnicki, C; Uahengo, G; Xu, C; Xu, Q | 1 |
Kim, JE; Moon, HS; Nam, NE; Seo, SH | 1 |
Ilani, A; Rammelsberg, P; Rues, S; Schmitt, C; Schwindling, FS; Zehender, N; Zenthöfer, A | 1 |
Bacchi, A; Cadore-Rodrigues, AC; Packaeser, MG; Pereira, GKR; Rippe, MP; Soares, PM; Valandro, LF | 1 |
Kongkiatkamon, S; Peampring, C | 1 |
Benalcázar Jalkh, EB; Bergamo, ETP; Bonfante, EA; Campos, TMB; Coelho, PG; de Araújo-Júnior, ENS; Genova, LA; Gierthmuehlen, PC; Lopes, ACO; Tebcherani, SM; Witek, L; Yamaguchi, S | 1 |
Li, KC; Lyons, KM; Singh, RG; Waddell, JN | 1 |
Pontes, S; Rocha, MG; Roulet, JF; Sinhoreti, MAC | 1 |
Ding, SJ; Huang, YW; Lin, CW; Wei, CL; Yan, M; Yang, CC | 1 |
Çelik, E; Gönüldaş, F; Öztürk, C | 1 |
da Rosa, LS; Kantorski, KZ; Pilecco, RO; Rocha Pereira, GK; Sarkis-Onofre, R; Valandro, LF | 1 |
Bacchi, A; Feitosa, VP; Machado, PS; Marini, G; Pereira, GKR; Saldanha da Rosa, L; Silvestre, FA; Valandro, LF | 1 |
Belli, R; Lohbauer, U; Lubauer, J; Schuenemann, FH | 1 |
Koenig, A; Koetzsch, T; Rosentritt, M; Strasser, T; Wertz, M | 1 |
Benino, Y; Inokoshi, M; Liu, H; Minakuchi, S; Tonprasong, W; Van Meerbeek, B; Vleugels, J; Yamamoto, M; Yoshihara, K; Zhang, F | 1 |
Akan, T; Etibarlı, N; Üstün, Ö | 1 |
Juntavee, A; Juntavee, N; Uasuwan, P | 1 |
Alshahrani, AM; Kim, J; Lim, CH; Zhang, Y | 1 |
Campos, TMB; Cruz, BS; Gomes, MM; Melo, RM; Rodrigues, JVM | 1 |
Kang, SU; Kim, CH; Kim, CK; Kim, HK; Kim, SJ; Kim, YK; Lee, DY; You, S | 1 |
He, Q; Qin, Y; Ye, J; Zhan, X; Zhang, W | 1 |
Carvalho, O; Henriques, B; Lasagni, AF; Özcan, M; Sahoo, N; Silva, F; Souza, JCM | 1 |
Kwon, YH; Seol, HJ; Shin, HJ | 1 |
Annese, E; Archanjo, B; Carvalho Prado, M; Dos Santos, HE; Neves, Y; Prado, M; Simão, R; Villanova, M | 1 |
Kern, M; Möller, R; Wille, S | 1 |
Dong, H; Jiang, Q; Wu, X; Zhang, X; Zhao, J | 1 |
De Bortoli, LS; Dos Santos, BC; Fabris, D; Fredel, MC; Henriques, B; Schabbach, LM | 1 |
Ding, Q; Gu, JH; Li, WJ; Lin, YH; Sun, FB; Zhang, L | 1 |
Barkarmo, S; Inagaki, R; Kanno, T; Nakamura, K; Örtengren, U; Shishido, S; Svanborg, P | 1 |
Aarts, JM; Choi, JJE; Liu, X; Ma, S | 1 |
Fujisawa, M; Fujita, T; Ishida, Y; Lassila, L; Miura, S; Shinya, A; Vallittu, P | 1 |
Cho, JH; Jo, YH; Lau, LN; Yeo, IL | 1 |
Augusto Bonfante, E; Moreira Bastos Campos, T; Patrocínio Thim, G; Pereira, RM | 1 |
Jung, BY; Kim, SH; Oh, NS; Pang, NS | 1 |
Bai, X; Bijle, MN; Ding, H; Han, A; Matinlinna, JP; Tsoi, JK; Yang, Y | 1 |
Aboushelib, MN; El Halawani, MT; Hammad, IA; Yousry, MA | 1 |
Dou, R; Hao, Z; Jiao, Y; Sheng, Y; Tang, W; Wang, L; Yao, L | 1 |
Aragonez, GC; Dalla-Nora, F; Dos Santos, SS; Pereira, GKR; Rippe, MP; Soares, PM; Valandro, LF | 1 |
42 review(s) available for zirconium and yttrium
Article | Year |
---|---|
Metabolism and possible health effects of aluminum.
Topics: Actin Cytoskeleton; Aluminum; Alzheimer Disease; Amyotrophic Lateral Sclerosis; Aneuploidy; Animals; Autoimmune Diseases; Beryllium; Biological Transport; Bone and Bones; Brain; Cations; Cell Division; Cells; Chromium; Connective Tissue; Cytoplasm; DNA; Down Syndrome; Encephalitis; Erythrocytes; Feces; Gallium; Humans; Hypersensitivity; Immunity, Cellular; Indium; Intestinal Absorption; Intestinal Mucosa; Lung; Membrane Lipids; Microtubules; Muscular Dystrophies; Nondisjunction, Genetic; Osteomalacia; Parkinson Disease; Renal Dialysis; Scandium; Tissue Distribution; Transferrin; Yttrium; Zirconium | 1986 |
Contemporary all-ceramic fixed partial dentures: a review.
Topics: Ceramics; Computer-Aided Design; Dental Materials; Denture Design; Denture, Partial, Fixed; Esthetics, Dental; Humans; Yttrium; Zirconium | 2004 |
All-ceramic full-coverage restorations: concepts and guidelines for material selection.
Topics: Aluminum Oxide; Aluminum Silicates; Ceramics; Dental Cavity Preparation; Dental Porcelain; Dental Restoration, Permanent; Humans; Lithium; Magnesium Oxide; Yttrium; Zirconium | 2005 |
State of the art of zirconia for dental applications.
Topics: Aluminum Oxide; Crystallization; Dental Porcelain; Dental Prosthesis; Dental Stress Analysis; Glass; Humans; Magnesium Oxide; Materials Testing; Metal Ceramic Alloys; Oxides; Surface Properties; Yttrium; Zirconium | 2008 |
The Zirconia: a new dental ceramic material. An overview.
Topics: Ceramics; Crowns; Dental Materials; Denture, Partial; Humans; Yttrium; Zirconium | 2007 |
Zirconia in dentistry: Part 1. Discovering the nature of an upcoming bioceramic.
Topics: Biocompatible Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Drug Stability; Optical Phenomena; Surface Properties; Yttrium; Zirconium | 2009 |
Zirconia in dentistry: part 2. Evidence-based clinical breakthrough.
Topics: Computer-Aided Design; Crowns; Dental Abutments; Dental Implants, Single-Tooth; Dental Instruments; Dental Porcelain; Dental Prosthesis; Dental Prosthesis Design; Dental Veneers; Denture Precision Attachment; Denture, Partial, Fixed; Evidence-Based Dentistry; Humans; Orthodontic Brackets; Post and Core Technique; Yttrium; Zirconium | 2009 |
Clinical trials in zirconia: a systematic review.
Topics: Clinical Trials as Topic; Crowns; Dental Abutments; Dental Implants; Dental Materials; Dental Porcelain; Denture, Partial, Fixed; Humans; Yttrium; Zirconium | 2010 |
Low temperature degradation -aging- of zirconia: A critical review of the relevant aspects in dentistry.
Topics: Cold Temperature; Compressive Strength; Dental Porcelain; Dental Restoration, Permanent; Dental Stress Analysis; Guidelines as Topic; Materials Testing; Particle Size; Prosthodontics; Tensile Strength; Yttrium; Zirconium | 2010 |
Zirconia in fixed implant prosthodontics.
Topics: Computer-Aided Design; Crowns; Dental Abutments; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Denture, Partial, Fixed; Hot Temperature; Humans; Yttrium; Zirconium | 2012 |
Current status of zirconia-based fixed restorations.
Topics: Clinical Trials as Topic; Computer-Aided Design; Crowns; Dental Bonding; Dental Marginal Adaptation; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Denture, Partial, Fixed; Humans; Yttrium; Zirconium | 2010 |
Performance of dental ceramics: challenges for improvements.
Topics: Computer-Aided Design; Dental Porcelain; Dental Prosthesis; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Surface Properties; Survival Analysis; Yttrium; Zirconium | 2011 |
Zirconia-based fixed partial dentures: a clinical review.
Topics: Cementation; Computer-Aided Design; Dental Marginal Adaptation; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Humans; Prosthesis Coloring; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2011 |
An overview of immediate root analogue zirconia implants.
Topics: Biocompatible Materials; Dental Implants; Dental Materials; Dental Prosthesis Design; Humans; Immediate Dental Implant Loading; Tooth Root; Yttrium; Zirconium | 2013 |
Marginal adaptation of ceramic crowns: a systematic review.
Topics: Aluminum Silicates; Ceramics; Crowns; Dental Marginal Adaptation; Dental Porcelain; Dental Prosthesis Design; Humans; Silicates; Yttrium; Zirconium | 2013 |
In vitro wear behavior of zirconia opposing enamel: a systematic review.
Topics: Ceramics; Dental Enamel; Dental Materials; Dental Polishing; Dental Prosthesis; Humans; Materials Testing; Stress, Mechanical; Surface Properties; Tooth Wear; Yttrium; Zirconium | 2014 |
In vitro fracture toughness of commercial Y-TZP ceramics: a systematic review.
Topics: Dental Stress Analysis; Humans; Materials Testing; Stress, Mechanical; Tooth Fractures; Yttrium; Zirconium | 2015 |
An overview of zirconia dental implants: basic properties and clinical application of three cases.
Topics: Adult; Dental Implants; Dental Materials; Esthetics, Dental; Female; Follow-Up Studies; Humans; Incisor; Male; Maxilla; Osseointegration; Patient Satisfaction; Tooth Extraction; Tooth Fractures; Tooth Socket; Tooth, Nonvital; Young Adult; Yttrium; Zirconium | 2014 |
Adhesion to zirconia used for dental restorations: a systematic review and meta-analysis.
Topics: Ceramics; Dental Bonding; Dental Materials; Glass Ionomer Cements; Humans; Resin Cements; Surface Properties; Yttrium; Zirconium | 2015 |
Low-temperature degradation of Y-TZP ceramics: A systematic review and meta-analysis.
Topics: Ceramics; Mechanical Phenomena; Pressure; Temperature; Time Factors; Yttrium; Zirconium | 2015 |
Does air particle abrasion affect the flexural strength and phase transformation of Y-TZP? A systematic review and meta-analysis.
Topics: Humans; Materials Testing; Pressure; Surface Properties; Tooth Abrasion; Yttrium; Zirconium | 2016 |
The effect of grinding on the mechanical behavior of Y-TZP ceramics: A systematic review and meta-analyses.
Topics: Ceramics; Materials Testing; Surface Properties; Yttrium; Zirconium | 2016 |
Cryotherapy Treatment After Unicompartmental and Total Knee Arthroplasty: A Review.
Topics: Analgesics, Opioid; Arthroplasty, Replacement, Knee; Cryotherapy; Drainage; Female; Femur; Humans; Knee Joint; Magnesium; Male; Middle Aged; Optics and Photonics; Osteoarthritis, Knee; Postoperative Period; Range of Motion, Articular; Surface Properties; Treatment Outcome; Yttrium; Zirconium | 2017 |
Dental ceramics: a review of new materials and processing methods.
Topics: Ceramics; Computer-Aided Design; Dental Materials; Dental Prosthesis Design; Dental Veneers; Materials Testing; Yttrium; Zirconium | 2017 |
Novel Zirconia Materials in Dentistry.
Topics: Ceramics; Dental Materials; Dental Stress Analysis; Esthetics, Dental; Humans; Surface Properties; Yttrium; Zirconium | 2018 |
The Effect of Surface Treatment on Shear Bond Strength between Y-TZP and Veneer Ceramic: A Systematic Review and Meta-Analysis.
Topics: Ceramics; Dental Bonding; Dental Veneers; Humans; Materials Testing; Shear Strength; Surface Properties; Yttrium; Zirconium | 2018 |
Does veneering technique affect the flexural strength or load-to-failure of bilayer Y-TZP? A systematic review and meta-analysis.
Topics: Dental Restoration Failure; Dental Veneers; Flexural Strength; Humans; Yttrium; Zirconium | 2018 |
Current status of zirconia implants in dentistry: preclinical tests.
Topics: Biocompatible Materials; Dental Implants; Dental Materials; Dental Prosthesis Design; Flexural Strength; Humans; MEDLINE; Osseointegration; PubMed; Surface Properties; Yttrium; Zirconium | 2019 |
Performance and outcome of zirconia dental implants in clinical studies: A meta-analysis.
Topics: Alveolar Bone Loss; Databases, Factual; Dental Implants; Dental Materials; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Denture, Partial, Fixed; Humans; Survival Analysis; Treatment Outcome; Yttrium; Zirconium | 2018 |
Evaluation of zirconia surface roughness after aluminum oxide airborne-particle abrasion and the erbium-YAG, neodymium-doped YAG, or CO
Topics: Aluminum; Aluminum Oxide; Carbon Dioxide; Erbium; Lasers, Solid-State; Materials Testing; Neodymium; Surface Properties; Yttrium; Zirconium | 2019 |
Clinical factors affecting the translucency of monolithic Y-TZP ceramics.
Topics: Ceramics; Dental Materials; Materials Testing; Surface Properties; Yttrium; Zirconium | 2020 |
Factors affecting the translucency of monolithic zirconia ceramics: A review from materials science perspective.
Topics: Ceramics; Dental Materials; Materials Science; Materials Testing; Surface Properties; Yttrium; Zirconium | 2020 |
Effects of low-temperature degradation on the surface roughness of yttria-stabilized tetragonal zirconia polycrystal ceramics: A systematic review and meta-analysis.
Topics: Ceramics; Materials Testing; Surface Properties; Temperature; Yttrium; Zirconium | 2021 |
Effect of high-speed sintering on the flexural strength of hydrothermal and thermo-mechanically aged zirconia materials.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Surface Properties; Yttrium; Zirconium | 2020 |
Does veneering technique affect the bond strength of bilayer Y-TZP? A systematic review and meta-analysis.
Topics: Dental Porcelain; Dental Veneers; Materials Testing; Yttrium; Zirconium | 2021 |
Effects of Aging on the Color and Translucency of Monolithic Translucent Y-TZP Ceramics: A Systematic Review and Meta-Analysis of
Topics: Ceramics; Color; Materials Testing; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2021 |
Influence of the chemical composition of monolithic zirconia on its optical and mechanical properties. Systematic review and meta-regression.
Topics: Aluminum; Ceramics; Dental Materials; Materials Testing; Surface Properties; Yttrium; Zirconium | 2022 |
The effect of accelerated aging on crystalline structures and optical properties of different monolithic zirconia: A qualitative systematic review.
Topics: Ceramics; Dental Materials; Materials Testing; Surface Properties; Yttrium; Zirconium | 2022 |
Ultra-translucent zirconia processing and aging effect on microstructural, optical, and mechanical properties.
Topics: Ceramics; Dental Materials; Materials Testing; Powders; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2022 |
[Research progress on the low-temperature degradation of zirconia in prosthetic dentistry].
Topics: Ceramics; Dental Materials; Esthetics, Dental; Materials Testing; Prosthodontics; Surface Properties; Temperature; Yttrium; Zirconium | 2022 |
Should finishing, polishing or glazing be performed after grinding YSZ ceramics? A systematic review and meta-analysis.
Topics: Ceramics; Dental Polishing; Dental Porcelain; Humans; Materials Testing; Surface Properties; Yttrium; Zirconium | 2023 |
Ultrashort pulse laser patterning of zirconia (3Y-TZP) for enhanced adhesion to resin-matrix cements used in dentistry: An integrative review.
Topics: Dental Bonding; Dentistry; Lasers; Materials Testing; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2023 |
44 trial(s) available for zirconium and yttrium
Article | Year |
---|---|
Microleakage of composite restorations after acid or Er-YAG laser cavity treatments.
Topics: Acid Etching, Dental; Aluminum Silicates; Analysis of Variance; Composite Resins; Dental Bonding; Dental Cavity Preparation; Dental Enamel; Dental Leakage; Dental Restoration, Permanent; Dentin; Erbium; Humans; Lasers; Microscopy, Electron, Scanning; Phosphoric Acids; Resin Cements; Rosaniline Dyes; Silicon Dioxide; Statistics, Nonparametric; Surface Properties; Thermodynamics; Water; Yttrium; Zirconium | 2001 |
Influence of Erbium:YAG laser energies on the microleakage of Class V resin-based composite restorations.
Topics: Aluminum Silicates; Bicuspid; Coloring Agents; Composite Resins; Dental Bonding; Dental Cavity Preparation; Dental Enamel; Dental High-Speed Equipment; Dental Leakage; Dental Polishing; Dental Restoration, Permanent; Dentin; Dentin-Bonding Agents; Erbium; Humans; Lasers; Methylene Blue; Radiation Dosage; Resin Cements; Silicon Dioxide; Statistics, Nonparametric; Surface Properties; Temperature; Thermodynamics; Time Factors; Yttrium; Zirconium | 2000 |
ER-YAG laser pretreatment effect on in vitro secondary caries formation around composite restorations.
Topics: Acetates; Acid Etching, Dental; Aluminum Silicates; Composite Resins; Dental Caries; Dental Caries Susceptibility; Dental Cavity Preparation; Dental Enamel; Dental Restoration, Permanent; Dentin; Erbium; Humans; Hydrogen-Ion Concentration; Low-Level Light Therapy; Microscopy, Polarization; Molar; Phosphoric Acids; Recurrence; Resin Cements; Silicon Dioxide; Statistics as Topic; Thermodynamics; Tooth Demineralization; Tooth Root; Yttrium; Zirconium | 2001 |
Bonding to Er-YAG-laser-treated dentin.
Topics: Acid Etching, Dental; Aluminum Silicates; Analysis of Variance; Bisphenol A-Glycidyl Methacrylate; Collagen; Composite Resins; Dental Bonding; Dentin; Dentin-Bonding Agents; Erbium; Humans; Lasers; Microscopy, Electron; Phosphoric Acids; Radiation Dosage; Silicon Dioxide; Statistics as Topic; Stress, Mechanical; Surface Properties; Water; Yttrium; Zirconium | 2002 |
A study of cavity preparation by Er:YAG laser. Effects on the marginal leakage of composite resin restoration.
Topics: Aluminum Silicates; Analysis of Variance; Bisphenol A-Glycidyl Methacrylate; Coloring Agents; Composite Resins; Dental Bonding; Dental Cavity Preparation; Dental Enamel; Dental High-Speed Equipment; Dental Leakage; Dental Marginal Adaptation; Dental Restoration, Permanent; Dentin; Dentin-Bonding Agents; Erbium; Humans; Lasers; Methacrylates; Microscopy, Electron, Scanning; Resin Cements; Silicon Dioxide; Smear Layer; Statistics as Topic; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2002 |
Topography, microhardness, and precision of fit on ready-made zirconia abutment before/after sintering process.
Topics: Dental Abutments; Dental Materials; Dental Polishing; Dental Porcelain; Dental Prosthesis Design; Dental Veneers; Hardness; Humans; Interferometry; Materials Testing; Surface Properties; Yttrium; Zirconium | 2007 |
Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging.
Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Dental Bonding; Dental Cements; Dental Porcelain; Humans; Materials Testing; Methacrylates; Organophosphorus Compounds; Resin Cements; Shear Strength; Silanes; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Yttrium; Zirconium | 2008 |
All-ceramic inlay-retained fixed partial dentures: preliminary results from a clinical study.
Topics: Adult; Aged; Dental Porcelain; Dental Restoration Failure; Denture Design; Denture Retention; Denture, Partial, Fixed; Female; Humans; Inlays; Male; Middle Aged; Proportional Hazards Models; Prospective Studies; Resin Cements; Young Adult; Yttrium; Zirconium | 2008 |
Delta ceramic-on-alumina ceramic articulation in primary THA: prospective, randomized FDA-IDE study and retrieval analysis.
Topics: Adult; Aged; Aluminum Oxide; Arthroplasty, Replacement, Hip; Female; Hip Joint; Hip Prosthesis; Humans; Male; Middle Aged; Osteolysis; Polyethylene; Prospective Studies; Prosthesis Design; Prosthesis Failure; Radiography; Recovery of Function; Reoperation; Stress, Mechanical; Time Factors; Treatment Outcome; United States; Yttrium; Zirconium | 2010 |
Effect of veneering techniques on color and translucency of Y-TZP.
Topics: Apatites; Ceramics; Color; Colorimetry; Dental Casting Technique; Dental Porcelain; Dental Prosthesis Design; Dental Veneers; Humans; Light; Materials Testing; Optical Phenomena; Spectrophotometry; Yttrium; Zirconium | 2010 |
Evaluation of self-adhesive resin cement bond strength to yttria-stabilized zirconia ceramic (Y-TZP) using four surface treatments.
Topics: Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Coated Materials, Biocompatible; Dental Bonding; Dental Cements; Dental Etching; Dental Porcelain; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Shear Strength; Silanes; Spectrometry, X-Ray Emission; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Water; Yttrium; Zirconium | 2011 |
Bond strength of different veneering ceramics to zirconia and their susceptibility to thermocycling.
Topics: Aluminum Silicates; Dental Bonding; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Gold Alloys; Humans; Metal Ceramic Alloys; Potassium Compounds; Shear Strength; Sodium Chloride; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2010 |
Effect of surface treatment on shear bond strength of zirconia to human dentin.
Topics: Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Cementation; Dental Bonding; Dental Cements; Dental Etching; Dental Porcelain; Dental Stress Analysis; Dentin; Dentin-Bonding Agents; Humans; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Silanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2011 |
Effect of fatigue on biaxial flexural strength of bilayered porcelain/zirconia (Y-TZP) dental ceramics.
Topics: Algorithms; Crystallography; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Elastic Modulus; Hot Temperature; Humans; Humidity; Materials Testing; Pliability; Spectrum Analysis, Raman; Stress, Mechanical; Surface Properties; Temperature; Yttrium; Zirconium | 2011 |
Three-dimensional fit of CAD/CAM-made zirconia copings.
Topics: Aluminum Oxide; Bicuspid; Computer-Aided Design; Crowns; Dental Cements; Dental Marginal Adaptation; Dental Porcelain; Dental Prosthesis Design; Humans; Image Processing, Computer-Assisted; Imaging, Three-Dimensional; Materials Testing; Models, Dental; Molar; Photography; Replica Techniques; Silicones; Surface Properties; Tooth Preparation; User-Computer Interface; Yttrium; Zirconium | 2011 |
Complication rate of molar crowns: a practice-based clinical evaluation.
Topics: Adult; Aged; Cold Temperature; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis Retention; Dental Restoration Failure; Dental Veneers; Dentin Sensitivity; Glass Ionomer Cements; Hot Temperature; Humans; Kaplan-Meier Estimate; Metal Ceramic Alloys; Middle Aged; Molar; Proportional Hazards Models; Yttrium; Zirconium | 2011 |
Improved bonding of zirconia substructures to resin using a "glaze-on" technique.
Topics: Acid Etching, Dental; Aluminum Oxide; Carbon Compounds, Inorganic; Coated Materials, Biocompatible; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Porcelain; Dental Stress Analysis; Glass; Hot Temperature; Humans; Hydrofluoric Acid; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Water; Yttrium; Zirconium | 2012 |
A clinical evaluation of all-ceramic bridges placed in patients attending UK general dental practices: three-year results.
Topics: Adult; Community-Based Participatory Research; Dental Porcelain; Denture, Partial, Fixed; Female; General Practice, Dental; Humans; Male; Private Practice; Resin Cements; United Kingdom; Yttrium; Zirconium | 2012 |
The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio.
Topics: Ceramics; Color; Dental Materials; Elastic Modulus; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Pliability; Stress, Mechanical; Surface Properties; Time Factors; Yttrium; Zirconium | 2013 |
The use of slow heating and slow cooling regimens to strengthen porcelain fused to zirconia.
Topics: Aluminum Oxide; Aluminum Silicates; Cold Temperature; Dental Bonding; Dental Materials; Dental Porcelain; Dental Stress Analysis; Elastic Modulus; Hot Temperature; Humans; Materials Testing; Pliability; Potassium Compounds; Stress, Mechanical; Surface Properties; Tensile Strength; Time Factors; Yttrium; Zirconium | 2012 |
The effect of surface treatment of the interfacial surface on fatigue-related microtensile bond strength of milled zirconia to veneering porcelain.
Topics: Aluminum Oxide; Apatites; Butylene Glycols; Ceramics; Dental Bonding; Dental Etching; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Water; Yttrium; Zirconium | 2012 |
One-piece zirconia oral implants: one-year results from a prospective cohort study. 1. Single tooth replacement.
Topics: Alveolar Bone Loss; Analysis of Variance; Cohort Studies; Dental Implants, Single-Tooth; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Female; Gingival Recession; Humans; Life Tables; Male; Prospective Studies; Statistics, Nonparametric; Yttrium; Zirconium | 2012 |
Fatigue strength of Ce-TZP/Al2O3 nanocomposite with different surfaces.
Topics: Acid Etching, Dental; Aluminum Oxide; Biocompatible Materials; Cerium; Composite Resins; Dental Etching; Dental Materials; Dental Polishing; Dental Stress Analysis; Humans; Hydrofluoric Acid; Materials Testing; Nanocomposites; Pliability; Stress, Mechanical; Surface Properties; Temperature; Water; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
Microstructural changes produced by abrading Y-TZP in presintered and sintered conditions.
Topics: Algorithms; Aluminum Oxide; Carbon Compounds, Inorganic; Ceramics; Chemical Phenomena; Crystallography; Dental Etching; Dental Materials; Hardness; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Porosity; Silicon Compounds; Silicon Dioxide; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Multiple teeth replacement with endosseous one-piece yttrium-stabilized zirconia dental implants.
Topics: Aged; Dental Implantation, Endosseous; Dental Implants; Dental Prosthesis Design; Humans; Middle Aged; Prosthesis Failure; Yttrium; Zirconium | 2012 |
Clinical performance of all-ceramic cantilever fixed dental prostheses: results of a 2-year randomized pilot study.
Topics: Adult; Aged; Cementation; Chi-Square Distribution; Dental Plaque; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis Retention; Dental Pulp Diseases; Dental Restoration Failure; Dental Veneers; Denture, Partial, Fixed; Double-Blind Method; Esthetics, Dental; Female; Humans; Male; Metal Ceramic Alloys; Middle Aged; Periodontal Index; Pilot Projects; Statistics, Nonparametric; Yttrium; Zirconium | 2012 |
Surface characterisation and bonding of Y-TZP following non-thermal plasma treatment.
Topics: Adhesiveness; Aluminum Oxide; Argon; Carbon; Carbon Compounds, Inorganic; Cementation; Ceramics; Coated Materials, Biocompatible; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Humans; Interferometry; Materials Testing; Methacrylates; Oxygen; Photoelectron Spectroscopy; Plasma Gases; Resin Cements; Silicon Compounds; Silicon Dioxide; Stress, Mechanical; Surface Properties; Surface Tension; Tensile Strength; Wettability; Yttrium; Zirconium | 2013 |
Durable bonding to mechanically and/or chemically pre-treated dental zirconia.
Topics: Adhesiveness; Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Cements; Dental Etching; Dental Porcelain; Humans; Hydrophobic and Hydrophilic Interactions; Methacrylates; Microscopy, Electron, Scanning; Resin Cements; Silanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Water; Yttrium; Zirconium | 2013 |
Fracture toughness of yttria-stabilized zirconia sintered in conventional and microwave ovens.
Topics: Ceramics; Chemical Phenomena; Crystallography; Dental Materials; Feasibility Studies; Hot Temperature; Humans; Materials Testing; Microwaves; Pliability; Saliva, Artificial; Stress, Mechanical; Surface Properties; Time Factors; Yttrium; Zirconium | 2013 |
Influence of surface treatment of yttria-stabilized tetragonal zirconia polycrystal with hot isostatic pressing on cyclic fatigue strength.
Topics: Acid Etching, Dental; Aluminum Oxide; Crystallography; Dental Etching; Dental Materials; Dental Polishing; Dental Stress Analysis; Hot Temperature; Humans; Hydrofluoric Acid; Materials Testing; Microscopy, Electron, Scanning; Phase Transition; Pliability; Pressure; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2013 |
Full-contour Y-TZP ceramic surface roughness effect on synthetic hydroxyapatite wear.
Topics: Biocompatible Materials; Ceramics; Computer-Aided Design; Dental Polishing; Diamond; Durapatite; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Surface Properties; Yttrium; Zirconium | 2013 |
Efficacy of surface treatments on the bond strength of resin cements to two brands of zirconia ceramic.
Topics: Adhesiveness; Aluminum Oxide; Aluminum Silicates; Composite Resins; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Glass; Humans; Humidity; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2013 |
Randomized clinical trial of implant-supported ceramic-ceramic and metal-ceramic fixed dental prostheses: preliminary results.
Topics: Aged; Aluminum Silicates; Apatites; Cementation; Ceramics; Dental Etching; Dental Implant-Abutment Design; Dental Implants; Dental Materials; Dental Porcelain; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Veneers; Denture Design; Denture, Partial, Fixed; Female; Follow-Up Studies; Gold Alloys; Humans; Male; Metal Ceramic Alloys; Middle Aged; Palladium; Pilot Projects; Resin Cements; Single-Blind Method; Titanium; Yttrium; Zirconium | 2014 |
Ceramic implants (Y-TZP): are they a viable alternative to titanium implants for the support of overdentures? A randomized clinical trial.
Topics: Aged; Aged, 80 and over; Bone Remodeling; Ceramics; Dental Implants; Dental Materials; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Denture Design; Denture, Complete; Denture, Overlay; Female; Follow-Up Studies; Humans; Male; Mandible; Maxilla; Middle Aged; Osseointegration; Surface Properties; Survival Analysis; Titanium; Treatment Outcome; Yttrium; Zirconium | 2014 |
Effect of colouring green stage zirconia on the adhesion of veneering ceramics with different thermal expansion coefficients.
Topics: Adhesiveness; Ceramics; Color; Dental Bonding; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Gold Alloys; Humans; Materials Testing; Metal Ceramic Alloys; Prosthesis Coloring; Stress, Mechanical; Surface Properties; Thermodynamics; Yttrium; Zirconium | 2013 |
Fracture analysis of randomized implant-supported fixed dental prostheses.
Topics: Adult; Aged; Aluminum Silicates; Bite Force; Cementation; Ceramics; Dental Implant-Abutment Design; Dental Implants; Dental Porcelain; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Veneers; Denture Design; Denture, Partial, Fixed; Female; Follow-Up Studies; Gold Alloys; Humans; Jaw Relation Record; Male; Metal Ceramic Alloys; Middle Aged; Photography, Dental; Resin Cements; Single-Blind Method; Survival Analysis; Young Adult; Yttrium; Zirconium | 2014 |
A randomized trial on the aesthetic outcomes of implant-supported restorations with zirconia or titanium abutments.
Topics: Adult; Ceramics; Color; Computer-Aided Design; Crowns; Dental Abutments; Dental Implants, Single-Tooth; Dental Materials; Dental Plaque Index; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Double-Blind Method; Esthetics, Dental; Female; Follow-Up Studies; Humans; Male; Middle Aged; Patient Satisfaction; Periodontal Index; Surface Properties; Titanium; Treatment Outcome; Visual Analog Scale; Yttrium; Zirconium | 2014 |
Performance of zirconia ceramic cantilever fixed dental prostheses: 3-year results from a prospective, randomized, controlled pilot study.
Topics: Adult; Aged; Ceramics; Cohort Studies; Dental Abutments; Dental Caries; Dental Marginal Adaptation; Dental Materials; Dental Plaque Index; Dental Restoration Failure; Denture Design; Denture Retention; Denture, Partial, Fixed; Esthetics, Dental; Female; Follow-Up Studies; Humans; Male; Metal Ceramic Alloys; Middle Aged; Periodontal Attachment Loss; Periodontal Index; Periodontal Pocket; Pilot Projects; Prospective Studies; Prosthesis Coloring; Survival Analysis; Yttrium; Zirconium | 2015 |
Zirconia-based versus metal-based single crowns veneered with overpressing ceramic for restoration of posterior endodontically treated teeth: 5-year results of a randomized controlled clinical study.
Topics: Adolescent; Adult; Aged; Bicuspid; Ceramics; Computer-Aided Design; Crowns; Dental Alloys; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Veneers; Denture, Partial, Fixed; Female; Humans; Male; Metal Ceramic Alloys; Middle Aged; Molar; Time Factors; Tooth Fractures; Tooth, Nonvital; Treatment Outcome; Young Adult; Yttrium; Zirconium | 2017 |
Effect of crystalline phase assemblage on reliability of 3Y-TZP.
Topics: Ceramics; Dental Materials; Materials Testing; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2021 |
Evaluation of Er:YAG and Er,Cr:YSGG laser irradiation for the debonding of prefabricated zirconia crowns.
Topics: Crowns; Humans; Lasers, Solid-State; Yttrium; Zirconium | 2021 |
Effect of nonthermal argon plasma treatment on the surface properties and phase transformation of zirconia.
Topics: Air Abrasion, Dental; Argon; Ceramics; Dental Materials; Materials Testing; Microscopy, Electron, Scanning; Plasma Gases; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2023 |
Plasma Surface Modification of 3Y-TZP at Low and Atmospheric Pressures with Different Treatment Times.
Topics: Atmospheric Pressure; Ceramics; Materials Testing; Surface Properties; Wettability; Yttrium; Zirconium | 2023 |
Load-bearing capacity under fatigue of bonded-yttria tetragonal zirconia polycrystals and -yttria-stabilized zirconia: Effects of the viscosity of a dual-cured resin cement.
Topics: Ceramics; Dental Stress Analysis; Materials Testing; Resin Cements; Surface Properties; Viscosity; Weight-Bearing; Yttrium; Zirconium | 2023 |
816 other study(ies) available for zirconium and yttrium
Article | Year |
---|---|
[Sublimatographic separation of fission products by beta-diketones complexes (author's transl)].
Topics: Chelating Agents; Chemical Phenomena; Chemistry; Europium; Ketones; Nuclear Fission; Radioisotopes; Temperature; Time Factors; Vacuum; Yttrium; Zirconium | 1978 |
The use of woven ceramic fabric as a periodontal allograft.
Topics: Alveolar Process; Animals; Biocompatible Materials; Ceramics; Dogs; Gingival Pocket; Haplorhini; Macaca mulatta; Osteoblasts; Periodontitis; Surgical Mesh; Yttrium; Zirconium | 1975 |
Stabilized ZrO2 as a thermoluminescent dosimeter for high gamma doses.
Topics: Gamma Rays; Oxides; Thermoluminescent Dosimetry; Yttrium; Zirconium | 1977 |
The rapid determination of trace elements in soils and plants by x-ray fluorescence analysis.
Topics: Arsenic; Evaluation Studies as Topic; Lead; Nickel; Soil; Spectrometry, Fluorescence; Trace Elements; United Kingdom; Vegetables; X-Rays; Yttrium; Zirconium | 1976 |
Laser trabecular ablation (LTA).
Topics: Aluminum Oxide; Aluminum Silicates; Erbium; Fiber Optic Technology; Holmium; Humans; Laser Therapy; Microscopy, Electron, Scanning; Optical Fibers; Pilot Projects; Silicon Dioxide; Trabecular Meshwork; Trabeculectomy; Yttrium; Zirconium | 1991 |
Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia.
Topics: Aluminum Oxide; Animals; Biocompatible Materials; Ceramics; Connective Tissue; Elasticity; Inflammation; Macrophages; Prostheses and Implants; Rats; Rats, Inbred Strains; Sterilization; Surface Properties; Time Factors; Yttrium; Zirconium | 1989 |
Metal-induced conformational changes in calmodulin.
Topics: 2',3'-Cyclic-Nucleotide Phosphodiesterases; Calcium; Calmodulin; Fluorescence; Lithium; Metals; Protein Conformation; Yttrium; Zirconium | 1987 |
Some factors affecting the in vitro rates of dissolution of respirable particles of relatively low solubility.
Topics: Aerosols; Air Pollution, Radioactive; Cerium Isotopes; Cesium Isotopes; Lung; Niobium; Radioisotopes; Solubility; Strontium Radioisotopes; Yttrium; Zirconium | 1973 |
The separation of some fission products and actinides on paper treated with liquid anion exchanger.
Topics: Americium; Cesium; Chromatography, Paper; Lanthanum; Neptunium; Nitrates; Palladium; Radionuclide Imaging; Rubidium; Thallium; Uranium; Yttrium; Zirconium | 1965 |
Separation of some fission products from uranium(VI) by reversed-phase partition chromatography.
Topics: Barium; Cerium; Cesium; Chromatography; Europium; Lanthanum; Strontium; Terbium; Uranium; Yttrium; Zirconium | 1966 |
Production of spherical ZrO2-Y2O3 and ZnO particles.
Topics: Biocompatible Materials; Microscopy, Electron, Scanning; Microspheres; Spectroscopy, Fourier Transform Infrared; X-Ray Diffraction; Yttrium; Zinc Oxide; Zirconium | 1994 |
Y-TZP ceramics for artificial joint replacements.
Topics: Animals; Biocompatible Materials; Ceramics; Chemical Phenomena; Chemistry, Physical; Implants, Experimental; Joint Prosthesis; Prostheses and Implants; Rabbits; Time Factors; Yttrium; Zirconium | 1998 |
Bonding to zirconia ceramic: adhesion methods and their durability.
Topics: Bisphenol A-Glycidyl Methacrylate; Ceramics; Composite Resins; Dental Bonding; Dental Cements; Dental Porcelain; Friction; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Silanes; Statistics, Nonparametric; Surface Properties; Tensile Strength; Yttrium; Zirconium | 1998 |
Yttrium-partially stabilized zirconium dioxide posts: an approach to restoring coronally compromised nonvital teeth.
Topics: Ceramics; Dental Alloys; Humans; Post and Core Technique; Prosthesis Coloring; Tooth, Nonvital; Yttrium; Zirconium | 1998 |
Ceramics for human clinical use.
Topics: Aluminum; Biocompatible Materials; Carbon; Ceramics; Humans; Prostheses and Implants; Yttrium; Zirconium | 1993 |
In-vitro evaluation of the cytocompatibility of wear particles generated by UHMWPE/zirconia friction.
Topics: Biocompatible Materials; Cell Survival; Cells, Cultured; Friction; Humans; Materials Testing; Particle Size; Polyethylenes; Prostheses and Implants; Yttrium; Zirconium | 1993 |
Lifetime-limiting strength degradation from contact fatigue in dental ceramics.
Topics: Aluminum Oxide; Aluminum Silicates; Bite Force; Ceramics; Crystallization; Dental Porcelain; Dental Restoration Wear; Dental Stress Analysis; Glass; Humans; Materials Testing; Potassium Compounds; Stress, Mechanical; Surface Properties; Time Factors; Water; Yttrium; Zirconium | 2000 |
The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic.
Topics: Analysis of Variance; Dental Polishing; Dental Porcelain; Elasticity; Hardness; Materials Testing; Microscopy, Electron, Scanning; Pliability; Statistics, Nonparametric; Surface Properties; Survival Analysis; X-Ray Diffraction; Yttrium; Zirconium | 1999 |
Strength and reliability of surface treated Y-TZP dental ceramics.
Topics: Ceramics; Dental Materials; Surface Properties; Yttrium; Zirconium | 2000 |
Long-term resin bond strength to zirconia ceramic.
Topics: Acrylates; Air; Bisphenol A-Glycidyl Methacrylate; Ceramics; Compomers; Composite Resins; Dental Bonding; Dental Materials; Humans; Materials Testing; Microscopy, Electron, Scanning; Phosphates; Silanes; Silicon Dioxide; Statistics as Topic; Statistics, Nonparametric; Stress, Mechanical; Surface Properties; Tensile Strength; Thermodynamics; Time Factors; Ultrasonics; Yttrium; Zirconium | 2000 |
The Decim system for the production of dental restorations.
Topics: Ceramics; Computer-Aided Design; Dental Materials; Dental Restoration, Permanent; Equipment Design; Humans; Inlays; Internet; Local Area Networks; Microcomputers; Software; Stress, Mechanical; Systems Integration; Yttrium; Zirconium | 1999 |
Protein characterisation of salivary and plasma biofilms formed in vitro on non-corroded and corroded dental ceramic materials.
Topics: Adsorption; Biofilms; Blood Proteins; Ceramics; Corrosion; Humans; In Vitro Techniques; Male; Materials Testing; Microscopy, Atomic Force; Salivary Proteins and Peptides; Surface Properties; Yttrium; Zirconium | 2001 |
Reliability and properties of ground Y-TZP-zirconia ceramics.
Topics: Algorithms; Analysis of Variance; Biocompatible Materials; Ceramics; Chemical Phenomena; Chemistry, Physical; Compressive Strength; Computer-Aided Design; Dental Materials; Dental Polishing; Denture, Partial, Fixed; Elasticity; Hardness; Humans; Likelihood Functions; Matched-Pair Analysis; Materials Testing; Pliability; Statistics as Topic; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2002 |
Osteointegration of bioactive glass-coated zirconia in healthy bone: an in vivo evaluation.
Topics: Adsorption; Animals; Biocompatible Materials; Cell Line; Coated Materials, Biocompatible; Female; Femur; Glass; Microscopy, Electron, Scanning; Prostheses and Implants; Rats; Rats, Sprague-Dawley; Scattering, Radiation; Time Factors; Tissue Adhesions; Yttrium; Zirconium | 2002 |
Laminated and functionally graded hydroxyapatite/yttria stabilized tetragonal zirconia composites fabricated by spark plasma sintering.
Topics: Biocompatible Materials; Hydroxyapatites; Implants, Experimental; Microscopy, Electron, Scanning; Temperature; Tensile Strength; Yttrium; Zirconium | 2003 |
Processing-microstructure-property relations in HVOF sprayed calcium phosphate based bioceramic coatings.
Topics: Bone Substitutes; Calcium Phosphates; Calorimetry, Differential Scanning; Ceramics; Coated Materials, Biocompatible; Durapatite; Elasticity; Hardness; Manufactured Materials; Materials Testing; Microscopy, Electron; Microscopy, Electron, Scanning; Molecular Conformation; Particle Size; Powders; Surface Properties; Titanium; X-Ray Diffraction; Yttrium; Zirconium | 2003 |
Cytotoxicity and bonding property of dental ceramics.
Topics: Cells, Cultured; Coloring Agents; Dental Bonding; Dental Porcelain; DNA; Fibroblasts; Glass Ionomer Cements; Humans; Materials Testing; Oxazines; Resin Cements; Shear Strength; Xanthenes; Yttrium; Zinc Phosphate Cement; Zirconium | 2003 |
Grain growth in nanocrystalline yttrium-stabilized zirconia thin films synthesized by spin coating of polymeric precursors.
Topics: Air Pressure; Crystallization; Crystallography; Electric Power Supplies; Hot Temperature; Materials Testing; Microscopy, Electron; Models, Chemical; Models, Molecular; Nanotechnology; Particle Size; Polymers; X-Ray Diffraction; Yttrium; Zirconium | 2002 |
[The effect of sintering temperature on the physical and mechanical properties of dental zirconia toughened ceramic].
Topics: Dental Porcelain; Hardness; Temperature; Tensile Strength; Yttrium; Zirconium | 2003 |
Clinical and laboratory considerations for the use of CAD/CAM Y-TZP-based restorations.
Topics: Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Denture, Partial, Fixed; Humans; Yttrium; Zirconium | 2003 |
ABSORPTION OF RADIOACTIVE FALLOUT PRODUCTS THROUGH NORMAL SKIN, BURNS, AND OPEN WOUNDS.
Topics: Barium; Burns; Iodine Isotopes; Lanthanum; Niobium; Permeability; Radiation Injuries; Radiation Injuries, Experimental; Radioactive Fallout; Radioisotopes; Rats; Research; Skin; Sodium Isotopes; Strontium Isotopes; Wounds and Injuries; Yttrium; Zirconium | 1963 |
EFFECTS OF ZIRCONIUM CITRATE ON EARLY FEMUR UPTAKE AND URINARY EXCRETION OF RADIOISOTOPES.
Topics: Bone and Bones; Cesium Isotopes; Citrates; Citric Acid; Femur; Metabolism; Plutonium; Radioisotopes; Rats; Research; Yttrium; Zirconium | 1963 |
[INORGANIC THIN-LAYER RADIOCHROMATOGRAPHY].
Topics: Barium; Calcium; Cesium; Chromatography; Gallium; Iodides; Iodine; Lanthanum; Niobium; Radioisotopes; Radiometry; Research; Scandium; Strontium; Tantalum; Tellurium; Yttrium; Zinc; Zirconium | 1964 |
CHROMATOGRAPHY ON ION-EXCHANGE PAPERS. XV. THE ADSORPTION OF METAL IONS ON CATION EXCHANGERS FROM PERCHLORIC ACID SOLUTIONS.
Topics: Adsorption; Aluminum; Bismuth; Cadmium; Cations; Chromatography; Cobalt; Copper; Gallium; Ion Exchange Resins; Ions; Iron; Lanthanum; Lead; Manganese; Metals; Nickel; Perchlorates; Research; Rhenium; Scandium; Silver; Sulfonic Acids; Tellurium; Thorium; Uranium; Yttrium; Zinc; Zirconium | 1964 |
[ON SOME AUTORADIOGRAPHIC OBSERVATIONS AFTER INHALATION OF RADIOACTIVE YTTRIUM AND ZIRCONIUM].
Topics: Animals; Autoradiography; Bronchi; Guinea Pigs; Lung; Occupational Medicine; Pathology; Radioactivity; Research; Respiratory System; Trachea; Yttrium; Yttrium Isotopes; Zirconium | 1964 |
REVERSED-PHASE CHROMATOGRAPHY OF AL, GA, IN, TL AND THE TRANSITION METALS OF THE IRON GROUP ON PAPER TREATED WITH DI-(2-ETHYLHEXYL) ORTHOPHOSPHORIC ACID IN CHLORIDE MEDIUM.
Topics: Aluminum; Barium; Calcium; Chromatography; Chromatography, Reverse-Phase; Cobalt; Gallium; Hydrochloric Acid; Indium; Iron; Manganese; Nickel; Phosphates; Phosphoric Acids; Research; Strontium; Thallium; Titanium; Uranium; Yttrium; Zirconium | 1965 |
Contemporary ceramics for dentistry.
Topics: Crowns; Dental Porcelain; Dental Prosthesis Design; Humans; Materials Testing; Yttrium; Zirconium | 2003 |
The action of salts of zirconium and other metals on plutonium and yttrium distribution and excretion.
Topics: Metals; Plutonium; Salts; Yttrium; Zirconium | 1952 |
Activity of plasma sprayed yttria stabilized zirconia reinforced hydroxyapatite/Ti-6Al-4V composite coatings in simulated body fluid.
Topics: Alloys; Animals; Biomimetic Materials; Body Fluids; Coated Materials, Biocompatible; Durapatite; Elasticity; Gases; Hardness; Hot Temperature; Humans; Manufactured Materials; Materials Testing; Surface Properties; Tensile Strength; Titanium; Yttrium; Zirconium | 2004 |
Colorimetric evaluation of the influence of five different restorative materials on the color of veneered densely sintered alumina.
Topics: Aluminum Oxide; Analysis of Variance; Color; Colorimetry; Dental Alloys; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Veneers; Glass; Gold Alloys; Humans; Materials Testing; Metal Ceramic Alloys; Resin Cements; Titanium; Yttrium; Zirconium | 2003 |
Microstructure and mechanical properties of plasma sprayed HA/YSZ/Ti-6Al-4V composite coatings.
Topics: Aerosols; Alloys; Coated Materials, Biocompatible; Crystallization; Durapatite; Elasticity; Hardness; Hot Temperature; Manufactured Materials; Materials Testing; Molecular Conformation; Particle Size; Powders; Surface Properties; Tensile Strength; Titanium; Yttrium; Zirconium | 2004 |
Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics.
Topics: Analysis of Variance; Crystallography, X-Ray; Dental Porcelain; Dental Stress Analysis; Elasticity; Hardness; Materials Testing; Microscopy, Electron, Scanning; Phase Transition; Pliability; Porosity; Statistics, Nonparametric; Tensile Strength; Yttrium; Zirconium | 2004 |
Critical effect of cubic phase on aging in 3mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis.
Topics: Ceramics; Cold Temperature; Hip Prosthesis; Kinetics; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Yttrium; Zirconium | 2004 |
CAD/CAM-machining effects on Y-TZP zirconia.
Topics: Computer-Aided Design; Crowns; Dental Polishing; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Denture, Partial, Fixed; Metal Ceramic Alloys; Surface Properties; Yttrium; Zirconium | 2004 |
Fatigue and damage tolerance of Y-TZP ceramics in layered biomechanical systems.
Topics: Biocompatible Materials; Biomechanical Phenomena; Ceramics; Crowns; Humans; Materials Testing; Regression Analysis; Stress, Mechanical; Surface Properties; Tensile Strength; Tooth Fractures; Yttrium; Zirconium | 2004 |
The effect of different dose levels of zirconium on the excretion and distribution of plutonium and yttrium.
Topics: Body Fluids; Citrates; Plutonium; Yttrium; Yttrium Radioisotopes; Zirconium | 1950 |
Acute toxicity of zirconium, columbium, strontium, lanthanum, cesium, tantalum and yttrium.
Topics: Cesium; Lanthanum; Niobium; Strontium; Tantalum; Yttrium; Zirconium | 1950 |
Zirconia to Ti-6Al-4V braze joint for implantable biomedical device.
Topics: Alloys; Animals; Biocompatible Materials; Dental Porcelain; Electric Stimulation; Hypoglossal Nerve; Implants, Experimental; Materials Testing; Prostheses and Implants; Sheep; Titanium; Yttrium; Zirconium | 2005 |
Fatigue sensitivity of Y-TZP to microscale sharp-contact flaws.
Topics: Equipment Failure Analysis; Mechanics; Microscopy, Atomic Force; Prosthesis Failure; Surface Properties; Yttrium; Zirconium | 2005 |
Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramic.
Topics: Analysis of Variance; Ceramics; Compressive Strength; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Elasticity; Friction; Hot Temperature; Materials Testing; Pliability; Regression Analysis; Statistics, Nonparametric; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2005 |
A critical comparison of methods for the determination of the aging sensitivity in biomedical grade yttria-stabilized zirconia.
Topics: Biodegradation, Environmental; Dental Porcelain; Interferometry; Materials Testing; Methods; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2005 |
Competitive inhibition and selectivity enhancement by Ca in the uptake of inorganic elements (Be, Na, Mg, K, Ca, Sc, Mn, Co, Zn, Se, Rb, Sr, Y, Zr, Ce, Pm, Gd, Hf) by carrot (Daucus carota cv. U.S. harumakigosun).
Topics: Beryllium; Calcium; Cerium; Cobalt; Daucus carota; Gadolinium; Hafnium; Magnesium; Manganese; Metals, Alkaline Earth; Metals, Rare Earth; Plant Roots; Plant Shoots; Plutonium; Potassium; Radioisotopes; Rubidium; Scandium; Selenium; Sodium; Stimulation, Chemical; Strontium; Yttrium; Zinc; Zirconium | 2005 |
A clinical report and overview of scientific studies and clinical procedures conducted on the 3M ESPE Lava All-Ceramic System.
Topics: Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Denture, Partial, Fixed; Humans; Materials Testing; Yttrium; Zirconium | 2005 |
The innovative DeguDent all-ceramic system: benchmark for zirconia processing.
Topics: Computer-Aided Design; Crowns; Dental Porcelain; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Humans; Technology, Dental; Yttrium; Zirconium | 2004 |
Shading Vita YZ substructures: influence on value and chroma, part I.
Topics: Color; Computer-Aided Design; Crowns; Dental Porcelain; Dental Veneers; Denture Design; Denture, Partial, Fixed; Humans; Prosthesis Coloring; Yttrium; Zirconium | 2004 |
Fracture resistance of yttrium oxide partially-stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing.
Topics: Ceramics; Computer-Aided Design; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Denture Design; Denture, Partial, Fixed; Hot Temperature; Statistics, Nonparametric; Yttrium; Zirconium | 2005 |
Strength and reliability of four-unit all-ceramic posterior bridges.
Topics: Aluminum Oxide; Ceramics; Dental Porcelain; Dental Restoration Failure; Denture Design; Denture, Partial, Fixed; Glass; Humans; Lithium Compounds; Materials Testing; Microscopy, Electron, Scanning; Reproducibility of Results; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2005 |
Osteoblast cell adhesion on a laser modified zirconia based bioceramic.
Topics: Biocompatible Materials; Cell Adhesion; Cell Movement; Cells, Cultured; Dental Porcelain; Humans; Lasers; Materials Testing; Osseointegration; Osteoblasts; Surface Properties; Yttrium; Zirconium | 2005 |
Bond strength of composite luting cement to zirconia ceramic surfaces.
Topics: Ceramics; Coated Materials, Biocompatible; Composite Resins; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Humans; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Silanes; Siloxanes; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2005 |
Flexural strength of a layered zirconia and porcelain dental all-ceramic system.
Topics: Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Elasticity; Materials Testing; Pliability; Tensile Strength; Yttrium; Zirconium | 2005 |
The frictional coefficients and associated wear resistance of novel low-shrink resin-based composites.
Topics: Animals; Cattle; Composite Resins; Ethylene Oxide; Fluorides; Friction; Hardness; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Polymers; Silanes; Silicon Dioxide; Siloxanes; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2005 |
The influence of surface modification techniques on the performance of a Y-TZP dental ceramic.
Topics: Air Abrasion, Dental; Aluminum Oxide; Dental Materials; Hardness; Hardness Tests; Materials Testing; Pliability; Stress, Mechanical; Surface Properties; Tensile Strength; Weight-Bearing; Yttrium; Zirconium | 2006 |
Shading Vita In-ceram YZ substructures: influence on value and chroma, part II.
Topics: Aluminum Oxide; Color; Colorimetry; Crowns; Dental Porcelain; Dental Veneers; Female; Humans; Magnesium Oxide; Prosthesis Coloring; Technology, Dental; Yttrium; Zirconium | 2004 |
The influence of simulated masticatory loading regimes on the bi-axial flexure strength and reliability of a Y-TZP dental ceramic.
Topics: Bite Force; Hardness; Hardness Tests; Materials Testing; Tensile Strength; Weight-Bearing; Yttrium; Zirconium | 2006 |
Microstructural and crystallographic surface changes after grinding zirconia-based dental ceramics.
Topics: Ceramics; Dental Materials; Dental Polishing; Materials Testing; Metal Ceramic Alloys; Microscopy, Electron, Scanning; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2006 |
Influence of surface finish and residual stresses on the ageing sensitivity of biomedical grade zirconia.
Topics: Biocompatible Materials; Dental Porcelain; Materials Testing; Microscopy, Atomic Force; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2006 |
[Early femoral osteolysis following Charnley-Kerboull total hip arthroplasty combining a 22-mm zirconia head on polyethylene].
Topics: Adult; Aged; Arthroplasty, Replacement, Hip; Dental Porcelain; Female; Femur; Follow-Up Studies; Hip Prosthesis; Humans; Male; Middle Aged; Osteolysis; Polyethylene; Prospective Studies; Prosthesis Design; Time Factors; Yttrium; Zirconium | 2005 |
Fracture resistance of all-ceramic zirconia bridges with differing phase stabilizers and quality of sintering.
Topics: Aluminum Silicates; Ceramics; Computer-Aided Design; Dental Materials; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Denture Design; Denture, Partial, Fixed; Hot Temperature; Humans; Magnesium; Materials Testing; Oxides; Potassium Compounds; Stress, Mechanical; Yttrium; Zirconium | 2006 |
Fatigue of zirconia under cyclic loading in water and its implications for the design of dental bridges.
Topics: Ceramics; Dental Materials; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Denture Design; Denture, Partial; Hardness; Humans; Materials Testing; Pliability; Stress, Mechanical; Surface Properties; Time Factors; Water; Yttrium; Zirconium | 2007 |
Mechanical and fracture behavior of veneer-framework composites for all-ceramic dental bridges.
Topics: Aluminum Oxide; Aluminum Silicates; Ceramics; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Veneers; Denture, Partial; Elasticity; Humans; Lithium Compounds; Materials Testing; Pliability; Potassium Compounds; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Yttrium; Zirconium | 2007 |
Cyclic fatigue in water of veneer-framework composites for all-ceramic dental bridges.
Topics: Aluminum Oxide; Aluminum Silicates; Apatites; Ceramics; Dental Materials; Dental Porcelain; Dental Veneers; Denture Design; Denture, Partial; Elasticity; Humans; Lithium Compounds; Materials Testing; Pliability; Potassium Compounds; Stress, Mechanical; Surface Properties; Water; Yttrium; Zirconium | 2007 |
Fracture resistance of the veneering on inlay-retained zirconia ceramic fixed partial dentures.
Topics: Composite Resins; Dental Veneers; Denture, Partial, Fixed; Materials Testing; Weight-Bearing; Yttrium; Zirconium | 2005 |
A three-dimensional evaluation of a laser scanner and a touch-probe scanner.
Topics: Computer-Aided Design; Crowns; Dental Materials; Dental Prosthesis Design; Humans; Image Processing, Computer-Assisted; Imaging, Three-Dimensional; Lasers; Models, Dental; Optics and Photonics; Reproducibility of Results; Software; Surface Properties; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2006 |
Restoration of maxillary incisors with a zirconia all-ceramic system: a case report.
Topics: Adult; Ceramics; Dental Abutments; Dental Materials; Dental Veneers; Denture Design; Denture, Partial, Fixed; Denture, Partial, Temporary; Follow-Up Studies; Humans; Incisor; Male; Maxilla; Stress, Mechanical; Yttrium; Zirconium | 2006 |
Thin-wall ceramic CAD/CAM crown copings: strength and fracture pattern.
Topics: Cementation; Ceramics; Computer-Aided Design; Crowns; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Humans; Materials Testing; Phosphates; Stress, Mechanical; Yttrium; Zinc Compounds; Zirconium | 2006 |
Restoring aesthetics and function with a metal-free crown: case report.
Topics: Adult; Crowns; Dental Porcelain; Esthetics, Dental; Humans; Male; Mandible; Molar; Retreatment; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2006 |
In vitro evaluation of low-temperature aging effects and finishing procedures on the flexural strength and structural stability of Y-TZP dental ceramics.
Topics: Crystallography, X-Ray; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Materials Testing; Pliability; Spectrometry, X-Ray Emission; Surface Properties; Survival Analysis; Temperature; Yttrium; Zirconium | 2006 |
Multiple nano-blast synthesis of PT/8Y-ZP composite nanopowders.
Topics: Hot Temperature; Microscopy, Electron; Nanostructures; Nanotechnology; Particle Size; Platinum; Powders; Triazines; Yttrium; Zirconium | 2006 |
Synthesis and characterisation of YSZ-Al2O3 nanostructured materials.
Topics: Aluminum Oxide; Crystallization; Dental Porcelain; Macromolecular Substances; Materials Testing; Molecular Conformation; Nanostructures; Nanotechnology; Particle Size; Surface Properties; Yttrium; Zirconium | 2006 |
Zirconia-based all-ceramic crowns and bridges: three case reports.
Topics: Adult; Cementation; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Denture, Partial, Fixed; Female; Humans; Male; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2006 |
The biaxial flexural strength and fatigue property of Lava Y-TZP dental ceramic.
Topics: Analysis of Variance; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Elasticity; Hardness; Materials Testing; Microscopy, Electron, Scanning; Pliability; X-Ray Diffraction; Yttrium; Zirconium | 2007 |
Effect of metal doping into Ce0.5Zr0.5O2 on photocatalytic activity of TiO2/Ce0.45Zr0.45M0.1OX (M=Y, La, Mn).
Topics: Air Pollutants; Benzene; Catalysis; Cerium; Lanthanum; Manganese; Metals; Photolysis; Spectrum Analysis; Titanium; X-Ray Diffraction; X-Rays; Yttrium; Zirconium | 2007 |
Numerical modeling of the fracture process in a three-unit all-ceramic fixed partial denture.
Topics: Acoustics; Birefringence; Compressive Strength; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Denture, Partial, Fixed; Elasticity; Equipment Failure Analysis; Materials Testing; Models, Theoretical; Numerical Analysis, Computer-Assisted; Tensile Strength; Yttrium; Zirconium | 2007 |
Failures of yttria-stabilised tetragonal zirconia: 52 retrieved ceramic femoral heads of total hip prostheses.
Topics: Aged; Aged, 80 and over; Biocompatible Materials; Ceramics; Female; Femur Head; Hip Prosthesis; Humans; Male; Middle Aged; Prosthesis Failure; X-Ray Diffraction; Yttrium; Zirconium | 2006 |
Contact damage in an yttria stabilized zirconia: implications.
Topics: Biocompatible Materials; Biophysical Phenomena; Biophysics; Ceramics; Compressive Strength; Dental Porcelain; Dental Stress Analysis; Elasticity; Equipment Failure; Finite Element Analysis; Humans; Materials Testing; Mathematics; Microscopy, Electron, Scanning; Models, Anatomic; Prostheses and Implants; Stress, Mechanical; X-Ray Diffraction; Yttrium; Zirconium | 2007 |
Behavior of CAL72 osteoblast-like cells cultured on zirconia ceramics with different surface topographies.
Topics: Acid Etching, Dental; Air Abrasion, Dental; Cell Line; Cell Movement; Cell Proliferation; Cell Shape; Cells, Cultured; Ceramics; Dental Materials; Humans; Microscopy, Electron, Scanning; Osteoblasts; Polystyrenes; Surface Properties; Time Factors; Titanium; Yttrium; Zirconium | 2007 |
Electrophoretic deposition of zirconia-Bioglass composite coatings for biomedical implants.
Topics: Alloys; Biomechanical Phenomena; Ceramics; Coated Materials, Biocompatible; Electrophoresis; Glass; Hot Temperature; Materials Testing; Microscopy, Electron, Scanning; Nanoparticles; Prostheses and Implants; Titanium; Yttrium; Zirconium | 2007 |
In vitro lifetime of dental ceramics under cyclic loading in water.
Topics: Biomechanical Phenomena; Dental Porcelain; Dental Stress Analysis; Denture Design; Time Factors; Water; Yttrium; Zirconium | 2007 |
Effects of alumina-blasting and adhesive primers on bonding between resin luting agent and zirconia ceramics.
Topics: Aluminum Oxide; Analysis of Variance; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Materials Testing; Methacrylates; Organophosphorus Compounds; Resin Cements; Shear Strength; Surface Properties; Tricarboxylic Acids; Yttrium; Zirconium | 2006 |
Fracture strength of all-ceramic posterior inlay-retained fixed partial dentures.
Topics: Bite Force; Ceramics; Computer-Aided Design; Dental Porcelain; Dental Stress Analysis; Denture Design; Denture Retention; Denture, Partial, Fixed; Inlays; Lithium Compounds; Materials Testing; Models, Dental; Molar; Resin Cements; Yttrium; Zirconium | 2007 |
Compatibility of machined Ce-TZP/Al2O3 nanocomposite and a veneering ceramic.
Topics: Aluminum Oxide; Cerium; Crowns; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Materials Testing; Nanocomposites; Pliability; Shear Strength; Survival Analysis; Tensile Strength; Yttrium; Zirconium | 2007 |
[The classification of ceramics according to its chemical nature and its method of production].
Topics: Aluminum Oxide; Aluminum Silicates; Biomimetic Materials; Ceramics; Computer-Aided Design; Dental Porcelain; Dental Prosthesis Design; Glass; Hot Temperature; Humans; Lithium Compounds; Magnesium Oxide; Metal Ceramic Alloys; Phase Transition; Potassium Compounds; Titanium; Yttrium; Zirconium | 2006 |
Use of zirconia in restorative dentistry.
Topics: Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Humans; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2007 |
Effect of YSZ thin film coating thickness on the strength of a ceramic substrate.
Topics: Coated Materials, Biocompatible; Dental Porcelain; Humans; Microscopy, Electron, Scanning; Stress, Mechanical; Yttrium; Zirconium | 2007 |
Zirconium CAD/CAM and bioesthetic layering of porcelain: color from within.
Topics: Aluminum Oxide; Ceramics; Color; Computer-Aided Design; Crowns; Dental Materials; Dental Occlusion; Dental Porcelain; Dental Prosthesis Design; Esthetics, Dental; Gingivectomy; Humans; Male; Maxilla; Optics and Photonics; Patient Satisfaction; Surface Properties; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2007 |
InLab CEREC restorations from a dual-arch impression.
Topics: Aged; Computer-Aided Design; Crowns; Dental Impression Technique; Dental Porcelain; Dental Prosthesis Design; Female; Humans; Yttrium; Zirconium | 2007 |
Aging of retrieved zirconia femoral heads.
Topics: Aged; Aged, 80 and over; Ceramics; Female; Femur Head; Hip Prosthesis; Humans; Male; Microscopy, Electron, Scanning; Middle Aged; Prosthesis Failure; Retrospective Studies; Surface Properties; Time Factors; Weight-Bearing; Yttrium; Zirconium | 2007 |
The firing procedure influences properties of a zirconia core ceramic.
Topics: Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Dental Veneers; Hardness; Hot Temperature; Pliability; Statistics, Nonparametric; Surface Properties; Yttrium; Zirconium | 2008 |
Fatigue and fracture properties of yttria partially stabilized zirconia crown systems.
Topics: Computer-Aided Design; Crowns; Crystallography, X-Ray; Dental Polishing; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Materials Testing; Metal Ceramic Alloys; Microscopy, Energy-Filtering Transmission Electron; Survival Analysis; Yttrium; Zirconium | 2008 |
A study of the bending resistance of implant-supported reinforced alumina and machined zirconia abutments and copies.
Topics: Aluminum Oxide; Ceramics; Computer-Aided Design; Crowns; Dental Abutments; Dental Bonding; Dental Implants; Dental Porcelain; Dental Prosthesis, Implant-Supported; Hot Temperature; Humans; Magnesium Oxide; Materials Testing; Pliability; Resin Cements; Stainless Steel; Stress, Mechanical; Titanium; Yttrium; Zirconium | 2008 |
NO reduction by propene or CO over alkali-promoted Pd/YSZ catalysts.
Topics: Adsorption; Air Pollutants; Alkenes; Carbon Monoxide; Catalysis; Chemistry, Physical; Models, Chemical; Nitric Oxide; Palladium; Pressure; Sodium; Vehicle Emissions; Yttrium; Zirconium | 2007 |
Fabrication of a custom-made ceramic post and core using CAD-CAM technology.
Topics: Acrylic Resins; Computer-Aided Design; Post and Core Technique; Root Canal Preparation; Yttrium; Zirconium | 2007 |
Influence of preparation of ceramic SEVNB specimens on fracture toughness testing results.
Topics: Biomechanical Phenomena; Ceramics; Dental Materials; Dental Porcelain; Humans; Materials Testing; Models, Theoretical; Pliability; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2008 |
Not all zirconia femoral heads degrade in vivo.
Topics: Arthroplasty, Replacement, Hip; Device Removal; Equipment Failure Analysis; Femur; Hardness; Hip Prosthesis; Humans; Magnesium Oxide; Prosthesis Design; Prosthesis Failure; Reoperation; Surface Properties; Time Factors; Treatment Outcome; Yttrium; Zirconium | 2007 |
Catalytic combustion of toluene over platinum supported on Ce-Zr-O solid solution modified by Y and Mn.
Topics: Catalysis; Cesium; Chemistry, Physical; Equipment Design; Gases; Incineration; Manganese; Metals; Oxygen; Platinum; Temperature; Toluene; X-Ray Diffraction; Yttrium; Zirconium | 2007 |
Comparison of resin cement adhesion to Y-TZP ceramic following manufacturers' instructions of the cements only.
Topics: Analysis of Variance; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Denture, Partial, Fixed; Materials Testing; Random Allocation; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2008 |
Influence of thermal expansion mismatch and fatigue loading on phase changes in porcelain veneered Y-TZP zirconia discs.
Topics: Dental Materials; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Hot Temperature; Humans; Materials Testing; Tensile Strength; Transition Temperature; Yttrium; Zirconium | 2007 |
All-ceramic inlay-retained fixed partial bridge using a CAD-CAM produced Y-TZP framework and fluoroapatite veneering ceramic: a clinical report.
Topics: Apatites; Bicuspid; Computer-Aided Design; Dental Abutments; Dental Cavity Preparation; Dental Porcelain; Dental Veneers; Denture Design; Denture, Partial, Fixed; Humans; Inlays; Male; Maxilla; Middle Aged; Yttrium; Zirconium | 2007 |
Fit of all-ceramic posterior fixed partial denture frameworks in vitro.
Topics: Analysis of Variance; Computer-Aided Design; Dental Marginal Adaptation; Dental Porcelain; Dental Prosthesis Design; Denture, Partial, Fixed; Prosthesis Fitting; Statistics, Nonparametric; Yttrium; Zirconium | 2007 |
Studies with colloids containing radioisotopes of yttrium, zirconium, columbium, and lanthanum; the chemical principles and methods involved in preparation of colloids of yttrium, zirconium, columbium, and lanthanum.
Topics: Colloids; Lanthanum; Niobium; Radioisotopes; Yttrium; Zirconium | 1949 |
Studies with colloids containing radioisotopes of yttrium, zirconium, columbium, and lanthanum; the controlled selective localization of radioisotopes of yttrium, zirconium, and columbium in the bone marrow, liver, and spleen.
Topics: Bone Marrow; Colloids; Lanthanum; Liver; Niobium; Radioisotopes; Spleen; Yttrium; Zirconium | 1949 |
An experimental study of the effect of zirconium and sodium citrate treatment on the metabolism of plutonium and radioyttrium.
Topics: Citrates; Plutonium; Sodium Citrate; Yttrium; Zirconium | 1949 |
Effect of thermal misfit between different veneering ceramics and zirconia frameworks on in vitro fracture load of single crowns.
Topics: Crowns; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Materials Testing; Survival Analysis; Transition Temperature; Yttrium; Zirconium | 2007 |
Raman spectroscopy as a probe of temperature and oxidation state for gadolinium-doped ceria used in solid oxide fuel cells.
Topics: Cerium; Electrolytes; Gadolinium; Oxidation-Reduction; Oxides; Reference Standards; Spectrum Analysis, Raman; Surface Properties; Temperature; Thermodynamics; Time Factors; Yttrium; Zirconium | 2008 |
Fractographic analyses of zirconia-based fixed partial dentures.
Topics: Ceramics; Dental Porcelain; Dental Veneers; Denture, Partial, Fixed; Elasticity; Glass; Hardness; Humans; Materials Testing; Microscopy, Electron, Scanning; Pliability; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2008 |
The effects of viscoelastic parameters on residual stress development in a zirconia/glass bilayer dental ceramic.
Topics: Algorithms; Ceramics; Crystallography; Dental Materials; Elasticity; Glass; Hot Temperature; Humans; Materials Testing; Mechanics; Pliability; Stress, Mechanical; Surface Properties; Time Factors; Transition Temperature; Viscosity; X-Ray Diffraction; Yttrium; Zirconium | 2008 |
Computer aided analysis of digitized dental stone replicas by dental CAD/CAM technology.
Topics: Bicuspid; Calcium Sulfate; Computer-Aided Design; Crowns; Cuspid; Dental Impression Materials; Dental Porcelain; Dental Prosthesis Design; Humans; Image Processing, Computer-Assisted; Incisor; Models, Dental; Molar; Polyvinyls; Reproducibility of Results; Siloxanes; Software; Surface Properties; Yttrium; Zirconium | 2008 |
Flexural strength, fatigue life, and stress-induced phase transformation study of Y-TZP dental ceramic.
Topics: Dental Porcelain; Materials Testing; Microscopy, Electron, Scanning; Spectrum Analysis, Raman; Stress, Mechanical; X-Ray Diffraction; Yttrium; Zirconium | 2009 |
ReaxFF reactive force field for solid oxide fuel cell systems with application to oxygen ion transport in yttria-stabilized zirconia.
Topics: Diffusion; Electrochemistry; Electrodes; Electrolytes; Ion Transport; Membranes, Artificial; Models, Chemical; Oxides; Oxygen; Quantum Theory; Thermodynamics; Yttrium; Zirconium | 2008 |
Fracture strength and fatigue resistance of all-ceramic molar crowns manufactured with CAD/CAM technology.
Topics: Aluminum Silicates; Cementation; Chi-Square Distribution; Compressive Strength; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Dental Veneers; Elasticity; Materials Testing; Molar; Pliability; Potassium Compounds; Random Allocation; Resin Cements; Yttrium; Zirconium | 2008 |
Effect of roughness of zirconia and titanium on fibroblast adhesion.
Topics: Animals; BALB 3T3 Cells; Biocompatible Materials; Cell Adhesion; Cell Shape; Dental Porcelain; Fibroblasts; Mice; Polystyrenes; Surface Properties; Time Factors; Titanium; Yttrium; Zirconium | 2008 |
Comparison of the static loading capacity of all-ceramic bridge frameworks in posterior teeth using three hard core materials.
Topics: Aluminum Oxide; Computer-Aided Design; Dental Abutments; Dental Porcelain; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Elasticity; Humans; Yttrium; Zirconium | 2007 |
The effect of finish line preparation and layer thickness on the failure load and fractography of ZrO2 copings.
Topics: Cementation; Crowns; Dental Abutments; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Glass Ionomer Cements; Hot Temperature; Humans; Materials Testing; Microscopy, Confocal; Microscopy, Electron, Scanning; Porosity; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Tooth Preparation, Prosthodontic; Water; Yttrium; Zirconium | 2008 |
Clinical study of the internal gaps of zirconia and metal frameworks for fixed partial dentures.
Topics: Computer-Aided Design; Dental Abutments; Dental Casting Technique; Dental Impression Materials; Dental Marginal Adaptation; Dental Porcelain; Denture Design; Denture, Partial, Fixed; Female; Gold Alloys; Humans; Male; Metal Ceramic Alloys; Prosthesis Fitting; Statistics, Nonparametric; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2008 |
Effects of dental adhesive cement and surface treatment on bond strength and leakage of zirconium oxide ceramics.
Topics: Compressive Strength; Dental Bonding; Dental Cements; Dental Leakage; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Glass Ionomer Cements; Materials Testing; Resin Cements; Shear Strength; Silanes; Surface Properties; Yttrium; Zirconium | 2008 |
Y-TZP ceramic processing from coprecipitated powders: a comparative study with three commercial dental ceramics.
Topics: Aluminum Oxide; Chemical Precipitation; Dental Porcelain; Dental Stress Analysis; Hardness; Materials Testing; Powders; Stress, Mechanical; Yttrium; Zirconium | 2008 |
Fracture behaviour of zirconia ceramic cantilever fixed dental prostheses in vitro.
Topics: Bicuspid; Bite Force; Computer-Aided Design; Crowns; Dental Abutments; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis Retention; Dental Restoration Failure; Humans; Inlays; Materials Testing; Stress, Mechanical; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2008 |
Effect of sintering time on biaxial strength of zirconium dioxide.
Topics: Ceramics; Dental Materials; Elastic Modulus; Hardness; Hot Temperature; Humans; Materials Testing; Particle Size; Phase Transition; Pliability; Stress, Mechanical; Temperature; Time Factors; Water; X-Ray Diffraction; Yttrium; Zirconium | 2009 |
Effect of shading the zirconia framework on biaxial strength and surface microhardness.
Topics: Crystallography, X-Ray; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Denture, Partial, Fixed; Hardness; Materials Testing; Pliability; Prosthesis Coloring; Spectrometry, X-Ray Emission; Surface Properties; Yttrium; Zirconium | 2008 |
Fracture strength of zirconia implants after artificial aging.
Topics: Aluminum Oxide; Bite Force; Ceramics; Crowns; Dental Cements; Dental Etching; Dental Implants; Dental Materials; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Phosphates; Resin Cements; Silanes; Stress, Mechanical; Surface Properties; Temperature; Titanium; Yttrium; Zirconium | 2009 |
Phase transformation of a new generation yttria-stabilized zirconia femoral head after total hip arthroplasty.
Topics: Aged; Arthroplasty, Replacement, Hip; Dental Porcelain; Female; Femur Head; Hip Prosthesis; Humans; Metal Ceramic Alloys; Prosthesis Design; Prosthesis Failure; Radiography; Surface Properties; Time Factors; Yttrium; Zirconium | 2008 |
Oxygen diffusion in nanocrystalline yttria-stabilized zirconia: the effect of grain boundaries.
Topics: Crystallization; Diffusion; Mass Spectrometry; Nanostructures; Oxygen; Yttrium; Zirconium | 2008 |
Load-bearing capacity of all-ceramic three-unit fixed partial dentures with different computer-aided design (CAD)/computer-aided manufacturing (CAM) fabricated framework materials.
Topics: Aluminum Oxide; Computer-Aided Design; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Hot Temperature; Mandible; Materials Testing; Survival Analysis; Time Factors; Yttrium; Zirconium | 2008 |
Mechanical properties of dental zirconia ceramics changed with sandblasting and heat treatment.
Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Ceramics; Cerium; Dental Etching; Dental Materials; Hot Temperature; Humans; Materials Testing; Mechanics; Microscopy, Electron, Scanning; Nanocomposites; Phase Transition; Pliability; Silicon Compounds; Spectrum Analysis, Raman; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2008 |
Effect of zirconia surface treatments on the shear strength of zirconia/veneering ceramic composites.
Topics: Aluminum Oxide; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Veneers; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Shear Strength; Silicon Dioxide; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2008 |
The effect of a ceramic coating on the cpTi-porcelain bond strength.
Topics: Adhesiveness; Aluminum Oxide; Ceramics; Coated Materials, Biocompatible; Dental Bonding; Dental Casting Investment; Dental Etching; Dental Materials; Dental Porcelain; Elastic Modulus; Electron Probe Microanalysis; Humans; Magnesium Oxide; Materials Testing; Metal Ceramic Alloys; Microscopy, Electron, Scanning; Pliability; Stress, Mechanical; Surface Properties; Titanium; Yttrium; Zirconium | 2009 |
Dynamic fatigue behavior of dental porcelain modified by surface deposition of a YSZ thin film.
Topics: Coated Materials, Biocompatible; Dental Porcelain; Dental Stress Analysis; Materials Testing; Pliability; Surface Properties; Survival Analysis; Yttrium; Zirconium | 2008 |
Stability of prototype two-piece zirconia and titanium implants after artificial aging: an in vitro pilot study.
Topics: Biomechanical Phenomena; Bite Force; Crowns; Dental Abutments; Dental Implants; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Humans; Lithium Compounds; Materials Testing; Metal Ceramic Alloys; Pilot Projects; Resin Cements; Silicates; Stress, Mechanical; Surface Properties; Titanium; Yttrium; Zirconium | 2009 |
Impact of thermal properties of veneering ceramics on the fracture load of layered Ce-TZP/A nanocomposite frameworks.
Topics: Aluminum Oxide; Ceramics; Cerium; Crowns; Dental Materials; Dental Porcelain; Dental Veneers; Glass; Humans; Materials Testing; Metal Ceramic Alloys; Nanocomposites; Shear Strength; Stress, Mechanical; Temperature; Thermodynamics; Transition Temperature; Yttrium; Zirconium | 2009 |
Approach for valuating the influence of laboratory simulation.
Topics: Bite Force; Cementation; Ceramics; Dental Abutments; Dental Bonding; Dental Materials; Dental Porcelain; Dental Restoration Failure; Dental Veneers; Denture, Partial, Fixed; Glass; Glass Ionomer Cements; Humans; Laboratories, Dental; Materials Testing; Stress, Mechanical; Surface Properties; Survival Analysis; Temperature; Yttrium; Zirconium | 2009 |
ReaxFF reactive force field for the Y-doped BaZrO3 proton conductor with applications to diffusion rates for multigranular systems.
Topics: Barium; Diffusion; Electric Power Supplies; Models, Chemical; Oxygen; Protons; Quantum Theory; Temperature; Yttrium; Zirconium | 2008 |
Spectroscopic, thermal and biological studies of the coordination compounds of sulfasalazine drug: Mn(II), Hg(II), Cr(III), ZrO(II), VO(II) and Y(III) transition metal complexes.
Topics: Anti-Infective Agents; Bacillus subtilis; Chromium; Differential Thermal Analysis; Escherichia coli; Manganese; Mercury; Metals; Microbial Sensitivity Tests; Spectrophotometry, Infrared; Spectrophotometry, Ultraviolet; Spectroscopy, Fourier Transform Infrared; Sulfasalazine; Thermodynamics; Vanadium; Yttrium; Zirconium | 2008 |
Influence of modifying and veneering the surface of ceramic abutments on cellular attachment and proliferation.
Topics: Aluminum Oxide; Cell Adhesion; Cell Proliferation; Cells, Cultured; Dental Abutments; Dental Porcelain; Dental Prosthesis Design; Dental Veneers; Fibroblasts; Gingiva; Humans; Materials Testing; Surface Properties; Yttrium; Zirconium | 2008 |
Impact of thermal misfit on shear strength of veneering ceramic/zirconia composites.
Topics: Aluminum Oxide; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Dentin; Hot Temperature; Humans; Materials Testing; Metal Ceramic Alloys; Shear Strength; Transition Temperature; Yttrium; Zirconium | 2009 |
A clinical evaluation of all-ceramic bridges placed in UK general dental practices: first-year results.
Topics: Adult; Computer-Aided Design; Dental Health Surveys; Dental Porcelain; Dental Restoration Failure; Dental Restoration Wear; Dental Restoration, Permanent; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Follow-Up Studies; General Practice, Dental; Humans; Jaw, Edentulous, Partially; Resin Cements; Treatment Outcome; United Kingdom; Yttrium; Zirconium | 2008 |
Failure analysis of clinically failed all-ceramic fixed partial dentures using fractal geometry.
Topics: Corrosion; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Denture, Partial, Fixed; Equipment Failure Analysis; Fractals; Humans; Yttrium; Zirconium | 2009 |
Fracture resistance of yttria-stabilized zirconia dental implant abutments.
Topics: Dental Abutments; Dental Implants; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Materials Testing; Yttrium; Zirconium | 2009 |
Graded structures for damage resistant and aesthetic all-ceramic restorations.
Topics: Ceramics; Crowns; Crystallography, X-Ray; Dental Bonding; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Denture, Partial, Fixed; Elastic Modulus; Esthetics, Dental; Glass; Hardness; Materials Testing; Microscopy, Electron, Scanning; Pliability; Resin Cements; Yttrium; Zirconium | 2009 |
Off-axis sliding contact reliability and failure modes of veneered alumina and zirconia.
Topics: Aluminum Oxide; Cementation; Composite Resins; Dental Materials; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Microscopy, Polarization; Pliability; Reproducibility of Results; Stress, Mechanical; Surface Properties; Tungsten Compounds; Water; Yttrium; Zirconium | 2009 |
SEM observations of porcelain Y-TZP interface.
Topics: Acid Etching, Dental; Adhesiveness; Aluminum Oxide; Ceramics; Crystallography; Dental Bonding; Dental Materials; Dental Polishing; Dental Porcelain; Dental Veneers; Desiccation; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Solubility; Surface Properties; Time Factors; Water; Yttrium; Zirconium | 2009 |
New nano-sized Al2O3-BN coating 3Y-TZP ceramic composites for CAD/CAM-produced all-ceramic dental restorations. Part I. Fabrication of powders.
Topics: Aluminum Oxide; Biocompatible Materials; Boron Compounds; Ceramics; Computer-Aided Design; Dental Implants; Metal Nanoparticles; Microscopy, Electron, Transmission; Powders; X-Ray Diffraction; Yttrium; Zirconium | 2009 |
Ultrasonic cleaning of silica-coated zirconia influences bond strength between zirconia and resin luting material.
Topics: Air Abrasion, Dental; Coated Materials, Biocompatible; Dental Bonding; Dental Porcelain; Electron Probe Microanalysis; Humans; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Silicon Dioxide; Stress, Mechanical; Time Factors; Ultrasonics; Water; Yttrium; Zirconium | 2008 |
Fatigue testing of two porcelain-zirconia all-ceramic crown systems.
Topics: Bite Force; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Molar; Survival Analysis; Yttrium; Zirconium | 2009 |
Evaluation of the surface roughness and morphologic features of Y-TZP ceramics after different surface treatments.
Topics: Air Abrasion, Dental; Aluminum Oxide; Analysis of Variance; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Lasers; Materials Testing; Microscopy, Electron, Scanning; Random Allocation; Surface Properties; Yttrium; Zirconium | 2009 |
Load-bearing capacity of all-ceramic posterior inlay-retained fixed dental prostheses.
Topics: Bite Force; Cementation; Ceramics; Composite Resins; Computer-Aided Design; Dental Abutments; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Denture Design; Denture Retention; Denture, Partial, Fixed, Resin-Bonded; Humans; Inlays; Resin Cements; Stress, Mechanical; Tooth Preparation, Prosthodontic; Weight-Bearing; Yttrium; Zirconium | 2009 |
Influence of surface treatments on surface roughness, phase transformation, and biaxial flexural strength of Y-TZP ceramics.
Topics: Algorithms; Crystallography; Dental Materials; Materials Testing; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2009 |
The metal-free approach to restorative treatment planning.
Topics: Aluminum Oxide; Aluminum Silicates; Cementation; Ceramics; Crowns; Dental Alloys; Dental Porcelain; Dental Prosthesis Design; Dental Pulp; Denture Design; Denture, Partial, Fixed; Esthetics, Dental; Humans; Patient Care Planning; Periodontium; Potassium Compounds; Tooth Preparation; Yttrium; Zirconium | 2006 |
The effect of surface treatment on the adhesion of resin cements to Y-TZP.
Topics: Dental Bonding; Dental Porcelain; Dental Stress Analysis; Materials Testing; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2008 |
Impact fracture resistance of two titanium-abutment systems versus a single-piece ceramic implant.
Topics: Algorithms; Alloys; Bone Substitutes; Ceramics; Copper; Dental Abutments; Dental Materials; Dental Prosthesis Design; Dental Stress Analysis; Elastic Modulus; Humans; Materials Testing; Stress, Mechanical; Titanium; Yttrium; Zinc; Zirconium | 2011 |
Influence of substructure design and spacer settings on the in vitro performance of molar zirconia crowns.
Topics: Bite Force; Crowns; Dental Marginal Adaptation; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Veneers; Humans; Materials Testing; Metal Ceramic Alloys; Microscopy, Electron, Scanning; Molar; Post and Core Technique; Stress, Mechanical; Surface Properties; Temperature; Tooth Preparation, Prosthodontic; Yttrium; Zinc Phosphate Cement; Zirconium | 2009 |
Effect of veneering techniques on damage and reliability of Y-TZP trilayers.
Topics: Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Materials Testing; Random Allocation; Yttrium; Zirconium | 2009 |
Effect of surface roughness on initial responses of osteoblast-like cells on two types of zirconia.
Topics: 3T3 Cells; Actin Cytoskeleton; Aluminum Oxide; Animals; Cell Adhesion; Cerium; Dental Porcelain; Flow Cytometry; Integrin alpha5; Integrin beta1; Materials Testing; Mice; Osteoblasts; Surface Properties; Titanium; Yttrium; Zirconium | 2009 |
Zirconium - clinical experiences.
Topics: Adult; Computer-Aided Design; Crowns; Dental Materials; Dental Prosthesis Design; Female; Humans; Male; Middle Aged; Yttrium; Zirconium | 2009 |
Comparison of edge chipping resistance of PFM and veneered zirconia specimens.
Topics: Aluminum Silicates; Dental Materials; Dental Polishing; Dental Porcelain; Dental Veneers; Diamond; Gold Alloys; Hardness; Hot Temperature; Humans; Materials Testing; Metal Ceramic Alloys; Palladium; Potassium Compounds; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2010 |
Pure colloidal metal and ceramic nanoparticles from high-power picosecond laser ablation in water and acetone.
Topics: Acetone; Ceramics; Colloids; Copper; Crystallography, X-Ray; Dental Porcelain; Lasers; Light; Magnesium; Metal Nanoparticles; Microscopy, Electron, Transmission; Nanoparticles; Nanotechnology; Particle Size; Scattering, Radiation; Silver; Spectrophotometry; Spectrophotometry, Ultraviolet; Static Electricity; Water; Yttrium; Zirconium | 2009 |
Interfacial toughness of bilayer dental ceramics based on a short-bar, chevron-notch test.
Topics: Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Differential Thermal Analysis; Elastic Modulus; Glass; Materials Testing; Yttrium; Zirconium | 2010 |
Fracture strength of prefabricated all-ceramic posterior inlay-retained fixed dental prostheses.
Topics: Acid Etching, Dental; Bicuspid; Bite Force; Cementation; Composite Resins; Dental Abutments; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Dentin-Bonding Agents; Denture Design; Denture Retention; Denture, Partial, Fixed, Resin-Bonded; Humans; Hydrofluoric Acid; Inlays; Materials Testing; Molar; Resin Cements; Stress, Mechanical; Yttrium; Zirconium | 2010 |
[Structure and properties of colored dental tetragonal zirconia stabilized by yttrium ceramics].
Topics: Ceramics; Materials Testing; X-Ray Diffraction; Yttrium; Zirconium | 2009 |
Letter to the editor: Clinical comparison of polyethylene wear with zirconia or cobalt-chromium femoral heads.
Topics: Arthroplasty, Replacement, Hip; Chromium Alloys; Femur Head; Hip Prosthesis; Humans; Medical Device Recalls; Osteoarthritis, Hip; Polyethylene; Prosthesis Design; Prosthesis Failure; Stress, Mechanical; Terminology as Topic; Treatment Outcome; Yttrium; Zirconium | 2010 |
Zirconium dioxide implant abutments for posterior single-tooth replacement: first results.
Topics: Adult; Aged; Alveolar Ridge Augmentation; Ceramics; Crowns; Dental Abutments; Dental Implantation, Endosseous; Dental Implants, Single-Tooth; Dental Materials; Dental Plaque Index; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Veneers; Female; Follow-Up Studies; Gingival Crevicular Fluid; Humans; Male; Mandible; Maxilla; Middle Aged; Oral Hygiene; Osseointegration; Periodontal Index; Periodontal Pocket; Prospective Studies; Yttrium; Zirconium | 2009 |
Concerns of hydrothermal degradation in CAD/CAM zirconia.
Topics: Ceramics; Computer-Aided Design; Dental Polishing; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Hot Temperature; Humans; Materials Testing; Random Allocation; Surface Properties; Tensile Strength; Yttrium; Zirconium | 2010 |
Fracture strength of three-unit fixed partial denture cores (Y-TZP) with different connector dimension and design.
Topics: Dental Clasps; Dental Porcelain; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Humans; Materials Testing; Tensile Strength; Yttrium; Zirconium | 2009 |
Surface characterization of zirconia dental implants.
Topics: Analysis of Variance; Crystallography, X-Ray; Dental Implants; Dental Porcelain; Imaging, Three-Dimensional; Microscopy, Electron, Scanning; Photoelectron Spectroscopy; Spectrometry, X-Ray Emission; Spectrum Analysis, Raman; Statistics, Nonparametric; Surface Properties; Yttrium; Zirconium | 2010 |
Fatigue and damage accumulation of veneer porcelain pressed on Y-TZP.
Topics: Composite Resins; Dental Cements; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Humans; Imaging, Three-Dimensional; Materials Testing; Microscopy, Electron, Scanning; Microscopy, Polarization; Stress, Mechanical; Surface Properties; Time Factors; Water; Yttrium; Zirconium | 2010 |
New zirconia primer improves bond strength of resin-based cements.
Topics: Air Abrasion, Dental; Analysis of Variance; Carboxylic Acids; Composite Resins; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Materials Testing; Organophosphates; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2010 |
Bactericidal effects of different laser systems on bacteria adhered to dental implant surfaces: an in vitro study comparing zirconia with titanium.
Topics: Colony Count, Microbial; Dental Implants; Dental Porcelain; Lasers, Gas; Lasers, Semiconductor; Microbial Viability; Plankton; Porphyromonas gingivalis; Streptococcus sanguis; Titanium; Yttrium; Zirconium | 2010 |
[Study on the compatibility of yttria-stabilized zirconia framework bonded to the corresponding veneering ceramic].
Topics: Ceramics; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Materials Testing; Yttrium; Zirconium | 2009 |
Effect of heat treatment after accelerated aging on phase transformation in 3Y-TZP.
Topics: Dental Materials; Dental Stress Analysis; Hot Temperature; Humans; In Vitro Techniques; Materials Testing; Microscopy, Atomic Force; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2010 |
Effect of primer treatment on bonding of resin cements to zirconia ceramic.
Topics: Analysis of Variance; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Materials Testing; Methacrylates; Organophosphonates; Phosphonoacetic Acid; Resin Cements; Silanes; Silicon Dioxide; Statistics, Nonparametric; Tensile Strength; Yttrium; Zirconium | 2010 |
Feasibility study of a partially hollow configuration for zirconia dental implants.
Topics: Animals; Ceramics; Dental Implants; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Dogs; Feasibility Studies; Female; Hardness; Materials Testing; Osseointegration; Pliability; Porosity; Surface Properties; Yttrium; Zirconium | 2010 |
Four-year clinical results of fixed dental prostheses with zirconia substructures (Cercon): end abutments vs. cantilever design.
Topics: Adult; Aged; Bicuspid; Cementation; Crowns; Dental Abutments; Dental Marginal Adaptation; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Veneers; Denture Design; Denture Repair; Denture Retention; Denture, Partial, Fixed; Female; Follow-Up Studies; Glass Ionomer Cements; Humans; Male; Middle Aged; Molar; Patient Satisfaction; Periodontal Index; Prospective Studies; Surface Properties; Survival Analysis; Treatment Outcome; Young Adult; Yttrium; Zirconium | 2009 |
Adhesive bonding of zirconia with single-liquid acidic primers and a tri-n-butylborane initiated acrylic resin.
Topics: Acid Etching, Dental; Acrylic Resins; Boron Compounds; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Dentin-Bonding Agents; Methacrylates; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Statistics, Nonparametric; Surface Properties; Yttrium; Zirconium | 2010 |
The electrochemical promotion of ethylene oxidation at a Pt/YSZ catalyst.
Topics: Carbon Dioxide; Catalysis; Electrochemistry; Ethylenes; Oxidation-Reduction; Oxygen; Platinum; Surface Properties; Water; Yttrium; Zirconium | 2010 |
Graded structures for all-ceramic restorations.
Topics: Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Elastic Modulus; Glass; Materials Testing; Pliability; Tensile Strength; Yttrium; Zirconium | 2010 |
XRD2 micro-diffraction analysis of the interface between Y-TZP and veneering porcelain: role of application methods.
Topics: Aluminum Oxide; Computer-Aided Design; Crystallization; Dental Bonding; Dental Porcelain; Dental Veneers; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Phase Transition; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2010 |
Shear bond strengths of self-adhesive luting resins fixing dentine to different restorative materials.
Topics: Adhesives; Ceramics; Dental Cements; Dental Materials; Dentin; Glass Ionomer Cements; Humans; Resin Cements; Shear Strength; Silanes; Yttrium; Zirconium | 2010 |
Damage and reliability of Y-TZP after cementation surface treatment.
Topics: Aluminum Oxide; Cementation; Composite Resins; Computer-Aided Design; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dentin; Diamond; Humans; Materials Testing; Methacrylates; Microscopy, Polarization; Resin Cements; Stress, Mechanical; Surface Properties; Time Factors; Tungsten Compounds; Water; X-Ray Diffraction; Yttrium; Zirconium | 2010 |
The effect of zirconia surface treatment on flexural strength and shear bond strength to a resin cement.
Topics: Acid Etching, Dental; Air Abrasion, Dental; Analysis of Variance; Dental Bonding; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dentin; Humans; Materials Testing; Pliability; Resin Cements; Shear Strength; Silanes; Surface Properties; Yttrium; Zirconium | 2010 |
The effect of nano-structured alumina coating on resin-bond strength to zirconia ceramics.
Topics: Aluminum Oxide; Coated Materials, Biocompatible; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Hot Temperature; Materials Testing; Microscopy, Atomic Force; Microscopy, Electron; Nanostructures; Random Allocation; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2010 |
Failure modes of Y-TZP crowns at different cusp inclines.
Topics: Cementation; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Molar; Resin Cements; Stress, Mechanical; Surface Properties; Thiones; Tooth Preparation; Tungsten Compounds; Yttrium; Zirconium | 2010 |
Shear bond strength between veneering ceramics and ceria-stabilized zirconia/alumina.
Topics: Aluminum Oxide; Cerium; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Diamond; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Nanocomposites; Shear Strength; Stress, Mechanical; Surface Properties; Vacuum; Yttrium; Zirconium | 2010 |
Effect of sandblasting and various metal primers on the shear bond strength of resin cement to Y-TZP ceramic.
Topics: Analysis of Variance; Dental Bonding; Dental Etching; Dental Porcelain; Dental Stress Analysis; Methacrylates; Microscopy, Electron, Scanning; Random Allocation; Resin Cements; Shear Strength; Statistics, Nonparametric; Surface Properties; Thiones; Thiouracil; Triazines; Yttrium; Zirconium | 2010 |
Fatigue life and failure modes of crowns systems with a modified framework design.
Topics: Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Chromium Alloys; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Veneers; Manikins; Metal Ceramic Alloys; Polyethylene Glycols; Polymethacrylic Acids; Random Allocation; Resin Cements; Survival Analysis; Yttrium; Zirconium | 2010 |
Combination treatment of tribochemical treatment and phosphoric acid ester monomer of zirconia ceramics enhances the bonding durability of resin-based luting cements.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Etching; Dental Porcelain; Dental Stress Analysis; Friction; Materials Testing; Methacrylates; Organophosphates; Phosphonoacetic Acid; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Shear Strength; Yttrium; Zirconium | 2010 |
Thermal/mechanical simulation and laboratory fatigue testing of an alternative yttria tetragonal zirconia polycrystal core-veneer all-ceramic layered crown design.
Topics: Bite Force; Computer Simulation; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Dental Veneers; Elastic Modulus; Finite Element Analysis; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Models, Biological; Molar; Resin Cements; Stress, Mechanical; Surface Properties; Temperature; Thermodynamics; Thiones; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2010 |
Evaluation of a one-piece milled zirconia post and core with different post-and-core systems: An in vitro study.
Topics: Cuspid; Dental Porcelain; Dental Stress Analysis; Gold Alloys; Humans; Incisor; Post and Core Technique; Prosthesis Fitting; Resin Cements; Shear Strength; Titanium; Yttrium; Zirconium | 2010 |
Different CAD/CAM-processing routes for zirconia restorations: influence on fitting accuracy.
Topics: Computer-Aided Design; Dental Abutments; Dental Marginal Adaptation; Dental Materials; Dental Porcelain; Dental Veneers; Denture Design; Denture, Partial, Fixed; Hot Temperature; Humans; Lasers; Materials Testing; Replica Techniques; Surface Properties; Yttrium; Zirconium | 2011 |
[Effect of pigmentation on the strength of dental Y-TZP/porcelain bilayered structure].
Topics: Dental Bonding; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Materials Testing; Pigmentation; Tensile Strength; Yttrium; Zirconium | 2010 |
Mechanical anchorage and peri-implant bone formation of surface-modified zirconia in minipigs.
Topics: Acid Etching, Dental; Animals; Bone Density; Bone Regeneration; Ceramics; Dental Etching; Dental Implants; Dental Materials; Dental Prosthesis Design; Dental Prosthesis Retention; Mandible; Microscopy, Electron, Scanning; Models, Animal; Osseointegration; Osteogenesis; Rotation; Stress, Mechanical; Surface Properties; Swine; Swine, Miniature; Time Factors; Titanium; Torque; Wound Healing; Yttrium; Zirconium | 2010 |
Ytterbium trifluoride as a radiopaque agent for dental cements.
Topics: 4-Aminobenzoic Acid; Absorptiometry, Photon; Aluminum; Barium Sulfate; Biocompatible Materials; Bismuth; Bisphenol A-Glycidyl Methacrylate; Camphor; Contrast Media; Dental Cements; Fluorides; Humans; Materials Testing; Methacrylates; para-Aminobenzoates; Phase Transition; Photochemical Processes; Pliability; Polyethylene Glycols; Polymethacrylic Acids; Quartz; Spectroscopy, Fourier Transform Infrared; Stress, Mechanical; Time Factors; Titanium; Ytterbium; Yttrium; Zirconium | 2010 |
Development, in vitro testing, and clinical use of a 3.5 mm-diameter zirconia abutment.
Topics: Crowns; Dental Abutments; Dental Implants, Single-Tooth; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Humans; Yttrium; Zirconium | 2010 |
Development and testing of multi-phase glazes for adhesive bonding to zirconia substrates.
Topics: Acid Etching, Dental; Calorimetry, Differential Scanning; Ceramics; Coated Materials, Biocompatible; Crystallization; Dental Cements; Dental Materials; Dental Porcelain; Durapatite; Hot Temperature; Humans; Light-Curing of Dental Adhesives; Lithium Compounds; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Stress, Mechanical; Surface Properties; Time Factors; Water; X-Ray Diffraction; Yttrium; Zirconium | 2010 |
Graded zirconia glass for resistance to veneer fracture.
Topics: Cementation; Composite Resins; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Veneers; Elastic Modulus; Epoxy Resins; Esthetics, Dental; Friction; Glass; Humans; Materials Testing; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2010 |
Reliability of metalloceramic and zirconia-based ceramic crowns.
Topics: Cementation; Composite Resins; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Gold Alloys; Humans; Materials Testing; Metal Ceramic Alloys; Microscopy, Electron, Scanning; Molar; Palladium; Resin Cements; Silicon Dioxide; Stress, Mechanical; Surface Properties; Time Factors; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2010 |
Influence of contamination on resin bond strength to nano-structured alumina-coated zirconia ceramic.
Topics: Acid Etching, Dental; Aluminum Oxide; Carbon Compounds, Inorganic; Coated Materials, Biocompatible; Coloring Agents; Composite Resins; Dental Bonding; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Nanostructures; Phosphates; Phosphoric Acids; Resin Cements; Saliva; Silicon Compounds; Silicones; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Water; Yttrium; Zirconium | 2010 |
Enhancement of ionic conductivity in Sm-doped ceria/yttria-stabilized zirconia heteroepitaxial structures.
Topics: Cerium; Electric Conductivity; Samarium; X-Ray Diffraction; Yttrium; Zirconium | 2010 |
Effect of silica coating combined to a MDP-based primer on the resin bond to Y-TZP ceramic.
Topics: Coated Materials, Biocompatible; Dental Bonding; Materials Testing; Methacrylates; Organophosphorus Compounds; Resin Cements; Silicon Dioxide; Yttrium; Zirconium | 2010 |
Subcritical crack growth behavior of dispersion oxide ceramics.
Topics: Aluminum Oxide; Ceramics; Dental Implants; Joint Prosthesis; Materials Testing; Yttrium; Zirconium | 2010 |
Comparison of candidate materials for a synthetic osteo-odonto keratoprosthesis device.
Topics: Aluminum Oxide; Alveolar Process; Bacterial Adhesion; Biocompatible Materials; Blotting, Western; Cell Adhesion; Cell Proliferation; Cell Survival; Cells, Cultured; Corneal Diseases; Corneal Stroma; Cuspid; Cytoskeletal Proteins; Durapatite; Fibroblasts; Humans; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Prostheses and Implants; Staphylococcus aureus; Titanium; Yttrium; Zirconium | 2011 |
Fatigue of zirconia and dental bridge geometry: Design implications.
Topics: Dental Clasps; Dental Porcelain; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Humans; Materials Testing; Stress, Mechanical; Yttrium; Zirconium | 2010 |
Surface roughness and EDS characterization of a Y-TZP dental ceramic treated with the CoJet™ Sand.
Topics: Aluminum; Aluminum Oxide; Chemical Phenomena; Computer-Aided Design; Crystallography; Dental Etching; Dental Porcelain; Electron Probe Microanalysis; Ethanol; Humans; Materials Testing; Silicon; Silicon Dioxide; Solvents; Spectrometry, X-Ray Emission; Surface Properties; Time Factors; Ultrasonics; Water; X-Ray Diffraction; Yttrium; Zirconium | 2010 |
Low temperature degradation of a Y-TZP dental ceramic.
Topics: Cold Temperature; Dental Porcelain; Elastic Modulus; Hardness; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Nanotechnology; Phase Transition; Spectrometry, Fluorescence; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2011 |
[Preparation and color analysis of tooth-like yttria stabilized tetragonal zirconia polycrystal].
Topics: Color; Dental Porcelain; Humans; Materials Testing; Yttrium; Zirconium | 2010 |
Evaluation of the marginal fit of a zirconia ceramic computer-aided machined (CAM) crown system.
Topics: Analysis of Variance; Bicuspid; Computer-Aided Design; Crowns; Dental Abutments; Dental Casting Technique; Dental Impression Technique; Dental Marginal Adaptation; Dental Porcelain; Dental Prosthesis Design; Humans; Maxilla; Yttrium; Zirconium | 2010 |
Surface damages of zirconia by Nd:YAG dental laser irradiation.
Topics: Air; Aluminum Oxide; Cerium; Color; Dental Porcelain; Hot Temperature; Humans; Lasers, Solid-State; Materials Testing; Microscopy, Electron, Scanning; Nanocomposites; Oxygen; Spectrometry, X-Ray Emission; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2010 |
Influence of thickness and cooling rate on development of spontaneous cracks in porcelain/zirconia structures.
Topics: Chemical Phenomena; Dental Materials; Dental Porcelain; Dental Veneers; Humans; Materials Testing; Stress, Mechanical; Surface Properties; Temperature; Thermodynamics; Yttrium; Zirconium | 2010 |
Crystallization of high-strength fine-sized leucite glass-ceramics.
Topics: Aluminum Silicates; Ceramics; Chemical Phenomena; Crystallization; Dental Materials; Dental Porcelain; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Phase Transition; Pliability; Spectrophotometry, Atomic; Stress, Mechanical; Surface Properties; Transition Temperature; X-Ray Diffraction; Yttrium; Zirconium | 2010 |
Optical properties of base dentin ceramics for all-ceramic restorations.
Topics: Absorption; Aluminum Silicates; Ceramics; Color; Dental Polishing; Dental Porcelain; Dental Prosthesis; Dentin; Glass; Humans; Light; Materials Testing; Optical Phenomena; Potassium Compounds; Prosthesis Coloring; Scattering, Radiation; Spectrometry, X-Ray Emission; Tin Compounds; Vanadium Compounds; Yttrium; Zirconium | 2011 |
Fatigue behavior in water of Y-TZP zirconia ceramics after abrasion with 30 μm silica-coated alumina particles.
Topics: Aluminum Oxide; Chemical Phenomena; Dental Etching; Dental Porcelain; Dental Stress Analysis; Elastic Modulus; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Pliability; Silicates; Silicon Dioxide; Stress, Mechanical; Surface Properties; Water; X-Ray Diffraction; Yttrium; Zirconium | 2011 |
Modified Y-TZP core design improves all-ceramic crown reliability.
Topics: Cementation; Computer-Aided Design; Crowns; Dental Articulators; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Friction; Humans; Materials Testing; Microscopy, Electron, Scanning; Post and Core Technique; Reproducibility of Results; Resin Cements; Stress, Mechanical; Surface Properties; Time Factors; Tooth Preparation; Water; Yttrium; Zirconium | 2011 |
Effect of air abrasion particles on the bond strength of adhesive resin cement to zirconia core.
Topics: Aluminum Oxide; Boron Compounds; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Stress Analysis; Diamond; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Resin Cements; Shear Strength; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2011 |
Fracture load of different crown systems on zirconia implant abutments.
Topics: Bite Force; Crowns; Dental Abutments; Dental Porcelain; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Materials Testing; Stress, Mechanical; Yttrium; Zirconium | 2011 |
Fabrication and characterization of dense zirconia and zirconia-silica ceramic nanofibers.
Topics: Ceramics; Dental Materials; Microscopy, Electron, Scanning; Nanofibers; Nanotechnology; Silicon Dioxide; Spectroscopy, Fourier Transform Infrared; X-Ray Diffraction; Yttrium; Zirconium | 2010 |
[Evaluation of alumina effects on the mechanical property and translucency of nano-zirconia all-ceramics].
Topics: Aluminum Oxide; Ceramics; Dental Porcelain; Dental Stress Analysis; Elasticity; Hardness; Materials Testing; Microscopy, Electron, Scanning; Nanoparticles; Pliability; Surface Properties; Yttrium; Zirconium | 2010 |
[The effect of firing times on the chroma of tetragonal zirconia polycrystal by adding rare-earth oxides].
Topics: Dental Porcelain; Dental Stress Analysis; Materials Testing; Oxides; Surface Properties; Yttrium; Zirconium | 2010 |
Effect Of Nd:YAG laser and CO2 laser treatment on the resin bond strength to zirconia ceramic.
Topics: Air Abrasion, Dental; Analysis of Variance; Coated Materials, Biocompatible; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Lasers, Gas; Lasers, Solid-State; Materials Testing; Microscopy, Electron, Scanning; Random Allocation; Resin Cements; Shear Strength; Silicon Dioxide; Statistics, Nonparametric; Surface Properties; Yttrium; Zirconium | 2011 |
Spectroscopic, structure and antimicrobial activity of new Y(III) and Zr(IV) ciprofloxacin.
Topics: Anti-Infective Agents; Bacteria; Ciprofloxacin; Fungi; Kinetics; Magnetic Resonance Spectroscopy; Microbial Sensitivity Tests; Models, Molecular; Spectrophotometry, Infrared; Spectrophotometry, Ultraviolet; Temperature; Thermogravimetry; Yttrium; Zirconium | 2011 |
The influence of support properties and complexity on fracture strength and fracture mode of all-ceramic fixed dental prostheses.
Topics: Aluminum; Cementation; Computer-Aided Design; Dental Abutments; Dental Materials; Dental Porcelain; Dental Veneers; Denture Design; Denture, Partial, Fixed; Elastic Modulus; Hot Temperature; Humans; Materials Testing; Metal Ceramic Alloys; Methylmethacrylates; Polymers; Stress, Mechanical; Temperature; Titanium; Yttrium; Zirconium | 2011 |
Residual stress measurement in veneering ceramic by hole-drilling.
Topics: Aluminum Silicates; Ceramics; Chromium Alloys; Computer-Aided Design; Crowns; Dental Etching; Dental Polishing; Dental Porcelain; Dental Veneers; Denture, Partial, Fixed; Electric Conductivity; Hot Temperature; Humans; Materials Testing; Metal Ceramic Alloys; Potassium Compounds; Stress, Mechanical; Surface Properties; Thermodynamics; Transducers; Yttrium; Zirconium | 2011 |
Effect of Er:YAG laser application on the shear bond strength and microleakage between resin cements and Y-TZP ceramics.
Topics: Dental Bonding; Dental Leakage; Humans; Lasers, Solid-State; Materials Testing; Molar; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2012 |
Influence of grinding procedures on the flexural strength of zirconia ceramics.
Topics: Compressive Strength; Dental High-Speed Technique; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Elasticity; Materials Testing; Pliability; Yttrium; Zirconium | 2010 |
Early bond strength of two resin cements to Y-TZP ceramic using MPS or MPS/4-META silanes.
Topics: Dental Bonding; Dental Porcelain; Dental Stress Analysis; Drug Combinations; Materials Testing; Methacrylates; Resin Cements; Silanes; Surface Properties; Trimethylsilyl Compounds; Yttrium; Zirconium | 2011 |
Pilot evaluation of four experimental conditioning treatments to improve the bond strength between resin cement and Y-TZP ceramic.
Topics: Air Abrasion, Dental; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Hot Temperature; Pilot Projects; Resin Cements; Shear Strength; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2011 |
The effects of cyclic loading and preparation on the fracture strength of zirconium-dioxide implants: an in vitro investigation.
Topics: Bite Force; Compressive Strength; Dental Implants; Dental Materials; Dental Prosthesis Design; Dental Stress Analysis; Elastic Modulus; Hardness; Humans; Materials Testing; Pliability; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Titanium; Yttrium; Zirconium | 2011 |
[Study on low temperature degradation of dental zirconia ceramic].
Topics: Cold Temperature; Dental Porcelain; Dental Stress Analysis; Materials Testing; Metal Ceramic Alloys; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2011 |
Interface proximity effects on ionic conductivity in nanoscale oxide-ion conducting yttria stabilized zirconia: an atomistic simulation study.
Topics: Electric Conductivity; Ions; Membranes, Artificial; Molecular Dynamics Simulation; Nanostructures; Oxides; Yttrium; Zirconium | 2011 |
Influence of pre-treatments on flexural strength of zirconia and debonding crack-initiation strength of veneered zirconia.
Topics: Air Abrasion, Dental; Crystallography, X-Ray; Dental Debonding; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Electron Probe Microanalysis; Hot Temperature; Materials Testing; Microscopy, Electron, Scanning; Pliability; Surface Properties; Yttrium; Zirconium | 2011 |
Comparative reliability analyses of zirconium oxide and lithium disilicate restorations in vitro and in vivo.
Topics: Adult; Ceramics; Computer-Aided Design; Crowns; Dental Abutments; Dental Enamel; Dental Materials; Dental Porcelain; Dental Prosthesis; Dental Restoration Failure; Dental Restoration Wear; Dental Restoration, Permanent; Dental Stress Analysis; Dental Veneers; Denture, Partial, Fixed; Female; Follow-Up Studies; Humans; Male; Materials Testing; Metal Ceramic Alloys; Middle Aged; Randomized Controlled Trials as Topic; Stress, Mechanical; Tooth Abrasion; Young Adult; Yttrium; Zirconium | 2011 |
Isotropic micropatterned silica coatings on zirconia induce guided cell growth for dental implants.
Topics: Cell Adhesion; Cell Line; Cell Proliferation; Cell Survival; Ceramics; Coated Materials, Biocompatible; Crystallography; Dental Implants; Dental Materials; Guided Tissue Regeneration, Periodontal; Hot Temperature; Humans; Indicators and Reagents; Materials Testing; Microscopy, Confocal; Microscopy, Electron, Scanning; Osteoblasts; Oxazines; Phase Transition; Silicon Dioxide; Spectrum Analysis, Raman; Surface Properties; Time Factors; X-Ray Diffraction; Xanthenes; Yttrium; Zirconium | 2011 |
Scalable nanostructured membranes for solid-oxide fuel cells.
Topics: Electric Conductivity; Electric Power Supplies; Electrodes; Electrolytes; Equipment Design; Ions; Nanostructures; Oxides; Temperature; Yttrium; Zirconium | 2011 |
Experimental and FE shear-bonding strength at core/veneer interfaces in bilayered ceramics.
Topics: Adhesiveness; Apatites; Ceramics; Computer Simulation; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Finite Element Analysis; Humans; Materials Testing; Post and Core Technique; Shear Strength; Stress, Mechanical; Yttrium; Zirconium | 2011 |
Subcritical crack growth behavior and life data analysis of two types of dental Y-TZP ceramics.
Topics: Crowns; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Denture, Partial, Fixed; Elasticity; Equipment Failure Analysis; Hot Temperature; Materials Testing; Pressure; Surface Properties; Survival Analysis; Yttrium; Zirconium | 2011 |
Wear performance of substructure ceramics and veneering porcelains.
Topics: Aluminum Silicates; Bite Force; Ceramics; Dental Enamel; Dental Etching; Dental Polishing; Dental Porcelain; Dental Restoration Wear; Dental Veneers; Humans; Magnesium Oxide; Materials Testing; Microscopy, Electron, Scanning; Potassium Compounds; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2011 |
The effect of preparation order on the crystal structure of yttria-stabilized tetragonal zirconia polycrystal and the shear bond strength of dental resin cements.
Topics: Air Abrasion, Dental; Analysis of Variance; Crystallization; Crystallography, X-Ray; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Hot Temperature; Materials Testing; Microscopy, Confocal; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Spectrometry, X-Ray Emission; Statistics, Nonparametric; Surface Properties; Yttrium; Zirconium | 2011 |
Effect of the microstructure on the lifetime of dental ceramics.
Topics: Aluminum Oxide; Aluminum Silicates; Crystallization; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Denture, Partial, Fixed; Elasticity; Materials Testing; Microscopy, Electron, Scanning; Porosity; Potassium Compounds; Spectrometry, X-Ray Emission; Surface Properties; Survival Analysis; Tensile Strength; Yttrium; Zirconium | 2011 |
Reliability and failure modes of implant-supported zirconium-oxide fixed dental prostheses related to veneering techniques.
Topics: Computer-Aided Design; Dental Abutments; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Denture, Partial, Fixed; Hardness; Humans; Mandible; Models, Dental; Survival Analysis; Yttrium; Zirconium | 2011 |
Novel fabrication method for zirconia restorations: bonding strength of machinable ceramic to zirconia with resin cements.
Topics: Aluminum Oxide; Aluminum Silicates; Apatites; Ceramics; Computer-Aided Design; Dental Bonding; Dental Cements; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Restoration, Permanent; Dental Stress Analysis; Feasibility Studies; Hardness; Humans; Materials Testing; Methacrylates; Resin Cements; Shear Strength; Silanes; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2011 |
Phase transformation of zirconia ceramics by hydrothermal degradation.
Topics: Aluminum Oxide; Chemical Phenomena; Crystallography; Dental Polishing; Dental Porcelain; Humans; Materials Testing; Microscopy, Electron, Scanning; Microscopy, Electron, Transmission; Phase Transition; Scattering, Radiation; Surface Properties; Temperature; Time Factors; Water; X-Ray Diffraction; Yttrium; Zirconium | 2011 |
The effect of adding silica to zirconia to counteract zirconia's tendency to degrade at low temperatures.
Topics: Acetic Acid; Chemical Phenomena; Crystallography; Dental Porcelain; Desiccation; Elastic Modulus; Humans; Humidity; Materials Testing; Pliability; Silicon Dioxide; Solubility; Stress, Mechanical; Surface Properties; Temperature; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2011 |
Use of endosseous one-piece yttrium-stabilized zirconia dental implants in premolar region: a two-year clinical preliminary report.
Topics: Adult; Aged; Bicuspid; Dental Implantation, Endosseous; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Female; Follow-Up Studies; Humans; Male; Middle Aged; Time Factors; Yttrium; Zirconium | 2011 |
Load-bearing capacity of artificially aged zirconia fixed dental prostheses with heterogeneous abutment supports.
Topics: Analysis of Variance; Computer-Aided Design; Dental Abutments; Dental Implants; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Stress Analysis; Denture, Partial, Fixed; Humans; Models, Dental; Polyurethanes; Statistics, Nonparametric; Time Factors; Transition Temperature; Weight-Bearing; Yttrium; Zirconium | 2012 |
Fracture strength of yttria-stabilized tetragonal zirconia polycrystals crowns with different design: an in vitro study.
Topics: Analysis of Variance; Ceramides; Crowns; Dental Abutments; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Glass Ionomer Cements; Humans; In Vitro Techniques; Materials Testing; Statistics, Nonparametric; Titanium; Yttrium; Zirconium | 2012 |
Restoration of maxillary anterior esthetics using lava all-ceramic fixed dental prostheses.
Topics: Adult; Anodontia; Bicuspid; Biocompatible Materials; Cementation; Computer-Aided Design; Dental Abutments; Dental Porcelain; Dentin-Bonding Agents; Denture Design; Denture, Partial, Fixed; Diastema; Esthetics, Dental; Humans; Incisor; Male; Maxilla; Resin Cements; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2011 |
Influence of cooling rate on residual stress profile in veneering ceramic: measurement by hole-drilling.
Topics: Chromium Alloys; Cold Temperature; Compressive Strength; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Dental Veneers; Materials Testing; Metal Ceramic Alloys; Stress, Mechanical; Tensile Strength; Yttrium; Zirconium | 2011 |
Development of graded Ni-YSZ composite coating on Alloy 690 by Pulsed Laser Deposition technique to reduce hazardous metallic nuclear waste inventory.
Topics: Hazardous Substances; Nickel; Radioactive Waste; Yttrium; Zirconium | 2011 |
Finite element analysis to compare stress distribution of connector of lithia disilicate-reinforced glass-ceramic and zirconia-based fixed partial denture.
Topics: Computer Simulation; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Denture Design; Denture, Partial, Fixed; Finite Element Analysis; Humans; Yttrium; Zirconium | 2012 |
Effect of connector design on fracture resistance of zirconia all-ceramic fixed partial dentures.
Topics: Analysis of Variance; Bicuspid; Bite Force; Dental Abutments; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Denture Design; Denture Retention; Denture, Partial, Fixed; Molar; Statistics, Nonparametric; Yttrium; Zirconium | 2011 |
Surface characterization of Ti and Y-TZP following non-thermal plasma exposure.
Topics: Materials Testing; Photoelectron Spectroscopy; Plasma Gases; Surface Properties; Titanium; Wettability; Yttrium; Zirconium | 2011 |
Inlay-retained zirconia fixed dental prostheses: modified designs for a completely adhesive approach.
Topics: Composite Resins; Dental Abutments; Dental Materials; Dental Porcelain; Dental Veneers; Denture Design; Denture Precision Attachment; Denture Retention; Denture, Partial, Fixed; Humans; Inlays; Resin Cements; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2011 |
Design of a new, multi-purpose, light-curing adhesive comprising a silane coupling agent, acidic adhesive monomers and dithiooctanoate monomers for bonding to varied metal and dental ceramic materials.
Topics: Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Caprylates; Chromium Alloys; Composite Resins; Dental Alloys; Dental Cements; Dental Etching; Dental Porcelain; Gold Alloys; Humans; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Organophosphonates; Palladium; Phosphonoacetic Acid; Phthalic Acids; Polyethylene Glycols; Polymethacrylic Acids; Propionates; Shear Strength; Silanes; Silver; Stress, Mechanical; Surface Properties; Temperature; Yttrium; Zirconium | 2011 |
The grinding efficiency by diamond points developed for yttria partially stabilized zirconia.
Topics: Computer-Aided Design; Dental High-Speed Equipment; Dental Polishing; Dental Porcelain; Diamond; Elastic Modulus; Electroplating; Hardness; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Pliability; Pressure; Rotation; Stress, Mechanical; Surface Properties; Thermal Conductivity; Thermodynamics; Yttrium; Zirconium | 2011 |
Joining dental ceramic layers with glass.
Topics: Aluminum Oxide; Crowns; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Elastic Modulus; Glass; Hardness; Materials Testing; Vitrification; Yttrium; Zirconium | 2011 |
Fracture load of tooth-implant-retained zirconia ceramic fixed dental prostheses: effect of span length and preparation design.
Topics: Bite Force; Cementation; Computer-Aided Design; Dental Abutments; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Stress Analysis; Denture, Partial, Fixed; Humans; Jaw, Edentulous, Partially; Materials Testing; Models, Dental; Statistics, Nonparametric; Titanium; Torque; Yttrium; Zirconium | 2012 |
Reactive force field simulation of proton diffusion in BaZrO3 using an empirical valence bond approach.
Topics: Barium Compounds; Computer Simulation; Diffusion; Models, Chemical; Oxides; Oxygen; Protons; Thermodynamics; Yttrium; Zirconium | 2011 |
Influence of gaseous ozone in peri-implantitis: bactericidal efficacy and cellular response. An in vitro study using titanium and zirconia.
Topics: Acid Etching, Dental; Anti-Bacterial Agents; Anti-Infective Agents, Local; Bacterial Adhesion; Cell Adhesion; Cell Culture Techniques; Cell Line, Tumor; Cell Movement; Cell Proliferation; Cell Shape; Chlorhexidine; Dental Etching; Dental Materials; Dental Polishing; Humans; Microscopy, Electron, Scanning; Osteoblasts; Oxidants; Ozone; Peri-Implantitis; Porphyromonas gingivalis; Saliva; Streptococcus sanguis; Surface Properties; Time Factors; Titanium; Yttrium; Zirconium | 2012 |
The all-ceramic, inlay supported fixed partial denture. Part 2. Fixed partial denture design: a finite element analysis.
Topics: Biomechanical Phenomena; Bite Force; Computer Simulation; Crowns; Dental Abutments; Dental Cavity Preparation; Dental Porcelain; Dental Prosthesis Design; Denture Design; Denture Precision Attachment; Denture, Partial, Fixed; Finite Element Analysis; Humans; Imaging, Three-Dimensional; Inlays; Models, Biological; Stress, Mechanical; Tensile Strength; Yttrium; Zirconium | 2011 |
Thermal gradients and residual stresses in veneered Y-TZP frameworks.
Topics: Birefringence; Cold Temperature; Crowns; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Hot Temperature; Materials Testing; Stress, Mechanical; Transition Temperature; Yttrium; Zirconium | 2011 |
Zirconium dioxide based dental restorations. Studies on clinical performance and fracture behaviour.
Topics: Crowns; Dental Implants; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Stress Analysis; Denture, Partial, Fixed; Humans; Materials Testing; Stress, Mechanical; Yttrium; Zirconium | 2011 |
Adaptation of all-ceramic fixed partial dentures.
Topics: Analysis of Variance; Computer-Aided Design; Crowns; Dental Marginal Adaptation; Dental Porcelain; Denture Design; Denture, Partial, Fixed; Humans; Models, Dental; Statistics, Nonparametric; X-Ray Microtomography; Yttrium; Zirconium | 2011 |
Effects of sintering temperature and particle size on the translucency of zirconium dioxide dental ceramic.
Topics: Biocompatible Materials; Dental Materials; Hot Temperature; Microscopy, Electron, Scanning; Particle Size; Surface Properties; Yttrium; Zirconium | 2011 |
Pressed ceramics onto zirconia. Part 1: Comparison of crystalline phases present, adhesion to a zirconia system and flexural strength.
Topics: Algorithms; Aluminum Silicates; Ceramics; Crystallization; Dental Bonding; Dental Materials; Dental Porcelain; Dental Stress Analysis; Elastic Modulus; Hot Temperature; Humans; Materials Testing; Mechanical Phenomena; Microscopy, Electron, Scanning; Pliability; Stress, Mechanical; Surface Properties; Time Factors; Vacuum; X-Ray Diffraction; Yttrium; Zirconium | 2011 |
Flexural strength and failure modes of layered ceramic structures.
Topics: Algorithms; Aluminum Oxide; Aluminum Silicates; Ceramics; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Elastic Modulus; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Pliability; Potassium Compounds; Saliva, Artificial; Stress, Mechanical; Surface Properties; Temperature; Ultrasonics; Vacuum; Yttrium; Zirconium | 2011 |
Mapping the tetragonal to monoclinic phase transformation in zirconia core dental crowns.
Topics: Crowns; Dental Materials; Dental Porcelain; Dental Restoration Failure; Dental Veneers; Humans; Materials Testing; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2011 |
Full zirconia fixed detachable implant-retained restorations manufactured from monolithic zirconia: clinical report after two years in service.
Topics: Dental Implantation, Endosseous; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis Retention; Dental Prosthesis, Implant-Supported; Dental Restoration, Temporary; Denture, Complete, Lower; Denture, Complete, Upper; Humans; Male; Middle Aged; Mouth Rehabilitation; Mouth, Edentulous; Yttrium; Zirconium | 2011 |
Effect of fatigue on fracture toughness and phase transformation of Y-TZP ceramics by X-ray diffraction and Raman spectroscopy.
Topics: Materials Testing; Spectrum Analysis, Raman; Stress, Mechanical; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
[Interface compatibility between tooth-like yttria-stabilized tetragonal zirconia polycrystal by adding rare-earth oxide and Vita VM9 veneering porcelain].
Topics: Dental Alloys; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Materials Testing; Oxides; Shear Strength; Yttrium; Zirconium | 2011 |
The influence of grain size on low-temperature degradation of dental zirconia.
Topics: Dental Implants; Hot Temperature; Materials Testing; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
Identification of peptide motif that binds to the surface of zirconia.
Topics: Amino Acid Sequence; Bacteriophages; Dental Implants; Dental Materials; Peptide Library; Peptides; Protein Binding; Yttrium; Zirconium | 2011 |
Influence of veneer thickness on residual stress profile in veneering ceramic: measurement by hole-drilling.
Topics: Acid Etching, Dental; Aluminum Oxide; Aluminum Silicates; Carbon Compounds, Inorganic; Ceramics; Chromium Alloys; Computer-Aided Design; Dental Etching; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Hot Temperature; Humans; Hydrofluoric Acid; Materials Testing; Mechanical Phenomena; Metal Ceramic Alloys; Potassium Compounds; Silicon Compounds; Stress, Mechanical; Surface Properties; Thermodynamics; Yttrium; Zirconium | 2012 |
Novel dental composites reinforced with zirconia-silica ceramic nanofibers.
Topics: Composite Resins; Dental Porcelain; Dental Stress Analysis; Elasticity; Glass; Materials Testing; Mechanical Phenomena; Nanofibers; Pliability; Polymerization; Rheology; Silicon Dioxide; Viscosity; Yttrium; Zirconium | 2012 |
The influence of pigments on the slow crack growth in dental zirconia.
Topics: Coloring Agents; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Elastic Modulus; Finite Element Analysis; Materials Testing; Torsion, Mechanical; Yttrium; Zirconium | 2012 |
Influence of zirconia framework thickness on residual stress profile in veneering ceramic: measurement by hole-drilling.
Topics: Cold Temperature; Compressive Strength; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Denture Design; Denture, Partial, Fixed; Materials Testing; Phase Transition; Tensile Strength; Yttrium; Zirconium | 2012 |
[Influence of compaction pressure and pre-sintering temperature on the machinability of zirconia ceramic].
Topics: Ceramics; Temperature; Yttrium; Zirconium | 2011 |
Sensitivity analysis of bi-layered ceramic dental restorations.
Topics: Algorithms; Aluminum Oxide; Aluminum Silicates; Ceramics; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Veneers; Elastic Modulus; Energy Transfer; Finite Element Analysis; Hot Temperature; Humans; Materials Testing; Mechanical Phenomena; Potassium Compounds; Shear Strength; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Thermal Conductivity; Thermodynamics; Yttrium; Zirconium | 2012 |
[Strength of bi-layer dental ceramic evaluated by MSP testing].
Topics: Aluminum Oxide; Ceramics; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Tensile Strength; Yttrium; Zirconium | 2011 |
Reliability of reduced-thickness and thinly veneered lithium disilicate crowns.
Topics: Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Metal Ceramic Alloys; Models, Dental; Survival Analysis; Yttrium; Zirconium | 2012 |
Sensing behavior of YSZ-based amperometric NO₂ sensors consisting of Mn-based reference-electrode and In₂O₃ sensing-electrode.
Topics: Air Pollutants; Electrochemistry; Electrodes; Equipment Design; Indium; Manganese Compounds; Nitrogen Dioxide; Oxides; Platinum; Yttrium; Zirconium | 2012 |
Generation of wear during the production of drug nanosuspensions by wet media milling.
Topics: Drug Compounding; Drug Contamination; Nanoparticles; Particle Size; Pharmaceutical Preparations; Rheology; Suspensions; Yttrium; Zirconium | 2012 |
The relationship between milling a new silica-doped zirconia and its resistance to low-temperature degradation (LTD): a pilot study.
Topics: Ceramics; Computer-Aided Design; Crowns; Crystallography; Dental Abutments; Dental Marginal Adaptation; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Hot Temperature; Humans; Materials Testing; Pilot Projects; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Titanium; Water; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
Tailoring interface structure in highly strained YSZ/STO heterostructures.
Topics: Electric Conductivity; Oxides; Stress, Mechanical; Strontium; Temperature; Titanium; X-Ray Diffraction; Yttrium; Zirconium | 2011 |
Influence of cement thickness on the bond strength of tooth-colored posts to root dentin after thermal cycling.
Topics: Analysis of Variance; Chi-Square Distribution; Composite Resins; Computer-Aided Design; Dental Bonding; Dental Prosthesis Design; Dental Stress Analysis; Dentin; Dentin-Bonding Agents; Glass; Hot Temperature; Humans; Post and Core Technique; Resin Cements; Tooth Root; Yttrium; Zirconium | 2013 |
The all-ceramic, inlay supported fixed partial denture. Part 3. Experimental approach for validating the finite element analysis.
Topics: Computer-Aided Design; Dental Porcelain; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Finite Element Analysis; Humans; Inlays; Materials Testing; Mechanical Phenomena; Models, Dental; Yttrium; Zirconium | 2012 |
Influence of low-temperature environmental exposure on the mechanical properties and structural stability of dental zirconia.
Topics: Dental Materials; Dental Prosthesis Design; Dental Stress Analysis; Elastic Modulus; Hardness; Hot Temperature; Humans; Materials Testing; Mechanical Phenomena; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Phase Transition; Pliability; Saliva, Artificial; Spectrometry, X-Ray Emission; Surface Properties; Temperature; Thermodynamics; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
[Mechanical property of tooth-like yttria-stabilized tetragonal zirconia polycrystal by adding rare earth oxide].
Topics: Dental Stress Analysis; Humans; Materials Testing; Oxides; Yttrium; Zirconium | 2012 |
Shear bond strength between resin and zirconia with two different silane blends.
Topics: Adhesiveness; Composite Resins; Cross-Linking Reagents; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Organosilicon Compounds; Photoelectron Spectroscopy; Propylamines; Resin Cements; Shear Strength; Silanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2012 |
Zirconia: a proven, durable ceramic for esthetic restorations.
Topics: Ceramics; Chemical Phenomena; Computer-Aided Design; Dental Abutments; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Veneers; Esthetics, Dental; Humans; Porosity; Surface Properties; Temperature; Yttrium; Zirconium | 2012 |
Degradation of dental ZrO2-based materials after hydrothermal fatigue. Part I: XRD, XRF, and FESEM analyses.
Topics: Cerium; Corrosion; Dental Porcelain; Dental Stress Analysis; Hot Temperature; Materials Testing; Microscopy, Electron, Scanning; Nanoparticles; Phase Transition; Saliva, Artificial; Spectrometry, X-Ray Emission; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
Influence of surface treatment on bond strength of veneering ceramics fused to zirconia.
Topics: Crowns; Dental Bonding; Dental Etching; Dental Polishing; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Elastic Modulus; Electron Probe Microanalysis; Hot Temperature; Materials Testing; Metal Ceramic Alloys; Surface Properties; Yttrium; Zirconium | 2012 |
Confocal Raman microscopy and SEM/EDS investigations of the interface between the zirconia core and veneering ceramic: the influence of a liner and regeneration firing.
Topics: Ceramics; Dental Materials; Dental Restoration Failure; Dental Veneers; Hot Temperature; Humans; Materials Testing; Microscopy, Confocal; Microscopy, Electron, Scanning; Spectrometry, X-Ray Emission; Spectrum Analysis, Raman; Yttrium; Zirconium | 2012 |
The effect of core material, veneering porcelain, and fabrication technique on the biaxial flexural strength and weibull analysis of selected dental ceramics.
Topics: Algorithms; Aluminum Silicates; Apatites; Ceramics; Computer-Aided Design; Crystallization; Dental Porcelain; Dental Prosthesis Design; Dental Veneers; Elastic Modulus; Hot Temperature; Humans; Materials Testing; Pliability; Post and Core Technique; Potassium Compounds; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2012 |
Mechanical properties, electrochemical corrosion and in-vitro bioactivity of yttria stabilized zirconia reinforced hydroxyapatite coatings prepared by gas tunnel type plasma spraying.
Topics: Animals; Biocompatible Materials; Cells, Cultured; Durapatite; Electric Power Supplies; Electrochemistry; Equipment Design; Gases; In Vitro Techniques; Male; Powders; Rats; Rats, Sprague-Dawley; Spectroscopy, Fourier Transform Infrared; Stress, Mechanical; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
Evaluation of the optical properties of CAD-CAM generated yttria-stabilized zirconia and glass-ceramic laminate veneers.
Topics: Aluminum Silicates; Analysis of Variance; Ceramics; Color; Composite Resins; Computer-Aided Design; Dental Abutments; Dental Cements; Dental Porcelain; Dental Prosthesis Design; Dental Veneers; Humans; Materials Testing; Models, Dental; Optical Phenomena; Potassium Compounds; Spectrophotometry; Yttrium; Zirconium | 2012 |
Shear bond strengths between alumina-toughened zirconia cores and veneering ceramics and their susceptibility to aging.
Topics: Aluminum Oxide; Ceramics; Dental Veneers; Microscopy, Electron, Scanning; Prosthesis Failure; Saliva, Artificial; Shear Strength; Spectrum Analysis; Yttrium; Zirconium | 2012 |
Influence of grain size and veneer firing process on the flexural strength of zirconia ceramics.
Topics: Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Dental Veneers; Hot Temperature; Humans; Materials Testing; Pliability; Stress, Mechanical; Yttrium; Zirconium | 2012 |
Wear behavior of dental Y-TZP ceramic against natural enamel after different finishing procedures.
Topics: Analysis of Variance; Dental Enamel; Dental Polishing; Dental Porcelain; Dental Restoration Wear; Humans; Mastication; Microscopy, Electron, Scanning; Statistics, Nonparametric; Surface Properties; Yttrium; Zirconium | 2012 |
Surface characterization of dental Y-TZP ceramic after air abrasion treatment.
Topics: Aluminum Oxide; Ceramics; Crystallization; Crystallography; Dental Etching; Dental Materials; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Nanoparticles; Particle Size; Photoelectron Spectroscopy; Pressure; Silicates; Silicon Dioxide; Spectrometry, X-Ray Emission; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
Evaluation of a conditioning method to improve core-veneer bond strength of zirconia restorations.
Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Ceramics; Coated Materials, Biocompatible; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Shear Strength; Silicon Compounds; Stress, Mechanical; Surface Properties; Water; Yttrium; Zirconium | 2012 |
Extremely thin bilayer electrolyte for solid oxide fuel cells (SOFCs) fabricated by chemical solution deposition (CSD).
Topics: Electric Power Supplies; Electrodes; Electrolytes; Metal Nanoparticles; Oxides; Solutions; Temperature; Yttrium; Zirconium | 2012 |
Three-dimensional finite element analysis of custom-made ceramic dowel made using CAD/CAM technology.
Topics: Compressive Strength; Computer-Aided Design; Crowns; Cuspid; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Elastic Modulus; Finite Element Analysis; Gold Alloys; Humans; Post and Core Technique; Root Canal Therapy; Tensile Strength; Yttrium; Zirconium | 2012 |
Conventional and modified veneered zirconia vs. metalloceramic: fatigue and finite element analysis.
Topics: Computer Simulation; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Dental Veneers; Finite Element Analysis; Humans; Metal Ceramic Alloys; Survival Analysis; Yttrium; Zirconium | 2012 |
Residual thermal stress simulation in three-dimensional molar crown systems: a finite element analysis.
Topics: Aluminum Oxide; Compressive Strength; Computer Simulation; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Dental Veneers; Finite Element Analysis; Hot Temperature; Humans; Imaging, Three-Dimensional; Metals; Molar; Stress, Mechanical; Tensile Strength; Yttrium; Zirconium | 2012 |
Initial attachment of human oral keratinocytes cultured on zirconia or titanium.
Topics: Cell Adhesion; Cell Shape; Cells, Cultured; Dental Porcelain; Epithelial Attachment; Humans; Integrin beta4; Keratinocytes; Laminin; Materials Testing; Mouth Mucosa; Real-Time Polymerase Chain Reaction; Titanium; Wettability; Yttrium; Zirconium | 2012 |
Examination of bond strength and mechanical properties of Y-TZP zirconia ceramics with different surface modifications.
Topics: Aluminum Oxide; Coated Materials, Biocompatible; Crystallography, X-Ray; Dental Bonding; Dental Porcelain; Dental Veneers; Electron Probe Microanalysis; Mechanical Phenomena; Particle Size; Pliability; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2012 |
Impact of air-abrasion on fracture load and failure type of veneered anterior Y-TZP crowns before and after chewing simulation.
Topics: Aluminum Oxide; Dental Veneers; Humans; Mastication; Materials Testing; Time Factors; Weight-Bearing; Yttrium; Zirconium | 2012 |
Bond strength of resin cement to zirconia ceramic with different surface treatments.
Topics: Analysis of Variance; Dental Bonding; Gels; Hydrofluoric Acid; Lasers, Solid-State; Microscopy, Electron, Scanning; Random Allocation; Resin Cements; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
An alumina ceramic target vessel for the remote production of metallic radionuclides by in situ target dissolution.
Topics: Aluminum Oxide; Radiochemistry; Radioisotopes; Solutions; Yttrium; Zirconium | 2012 |
Electrospun La0.8Sr0.2MnO₃ nanofibers for a high-temperature electrochemical carbon monoxide sensor.
Topics: Carbon Monoxide; Electrochemical Techniques; Electrodes; Hot Temperature; Lanthanum; Limit of Detection; Manganese Compounds; Nanofibers; Nanotechnology; Particle Size; Strontium; Surface Properties; Yttrium; Zirconium | 2012 |
Influence of CAD/CAM systems and cement selection on marginal discrepancy of zirconia-based ceramic crowns.
Topics: Aluminum Oxide; Bicuspid; Cementation; Computer-Aided Design; Crowns; Dental Cements; Dental Marginal Adaptation; Dental Porcelain; Dental Prosthesis Design; Glass Ionomer Cements; Humans; Magnesium Oxide; Materials Testing; Microscopy, Electron, Scanning; Models, Dental; Phosphates; Polycarboxylate Cement; Polymers; Resin Cements; Surface Properties; Tooth Preparation, Prosthodontic; Yttrium; Zinc Oxide; Zirconium | 2012 |
Influence of surface pretreatment on the short-term bond strength of resin composite to a zirconia-based material.
Topics: Aluminum Oxide; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Stress Analysis; Hot Temperature; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Particle Size; Resin Cements; Silanes; Stress, Mechanical; Surface Properties; Tensile Strength; Yttrium; Zirconium | 2012 |
Bonding of primed zirconia ceramics: evidence of chemical bonding and improved bond strengths.
Topics: Acetone; Acids; Dental Bonding; Dental Materials; Ethanol; Hot Temperature; Humans; Hydrophobic and Hydrophilic Interactions; Materials Testing; Methacrylates; Phosphates; Shear Strength; Solvents; Spectrometry, Mass, Secondary Ion; Stress, Mechanical; Surface Properties; Time Factors; Ultrasonics; Water; Wettability; Yttrium; Zirconium | 2012 |
Effects of ageing on surface textures of veneering ceramics for zirconia frameworks.
Topics: Analysis of Variance; Crystallography, X-Ray; Dental Porcelain; Dental Veneers; Denture, Partial, Fixed; Materials Testing; Microscopy, Electron, Scanning; Statistics, Nonparametric; Surface Properties; Time Factors; Yttrium; Zirconium | 2012 |
Laboratory aspects of zirconia restorations.
Topics: Cementation; Ceramics; Computer-Aided Design; Crowns; Crystallography; Dental Abutments; Dental Bonding; Dental Implants; Dental Materials; Dental Prosthesis Design; Dental Restoration Failure; Dental Veneers; Denture Design; Denture, Partial, Fixed; Hot Temperature; Humans; Prosthesis Coloring; Temperature; Tooth Preparation; Water; Yttrium; Zirconium | 2012 |
Multifactorial analysis of the impact of different manufacturing processes on the marginal fit of zirconia copings.
Topics: Analysis of Variance; Computer-Aided Design; Crowns; Dental Marginal Adaptation; Dental Porcelain; Dental Prosthesis Design; Humans; Image Processing, Computer-Assisted; Models, Dental; Tooth, Artificial; Yttrium; Zirconium | 2012 |
Aging performances for resisting low-temperature of three dental Yttria-stabilized zirconia ceramic core materials.
Topics: Ceramics; Dental Porcelain; Microscopy, Electron, Scanning; Temperature; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
Wear evaluation of the human enamel opposing different Y-TZP dental ceramics and other porcelains.
Topics: Analysis of Variance; Dental Enamel; Dental Occlusion; Dental Porcelain; Dental Stress Analysis; Humans; Statistics, Nonparametric; Tooth Attrition; Tooth Wear; Yttrium; Zirconium | 2012 |
Direct evidence for continuous linear kinetics in the low-temperature degradation of Y-TZP.
Topics: Cold Temperature; Kinetics; Microscopy, Electron, Scanning; Spectrum Analysis, Raman; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Phase transition of a cobalt-free perovskite as a high-performance cathode for intermediate-temperature solid oxide fuel cells.
Topics: Calcium Compounds; Electric Power Supplies; Electrochemistry; Electrodes; Models, Molecular; Molecular Conformation; Oxides; Phase Transition; Temperature; Titanium; Yttrium; Zirconium | 2012 |
Focus on: Implant dentistry.
Topics: Dental Implantation, Endosseous; Dental Implants; Dental Porcelain; Dental Prosthesis Design; Humans; Yttrium; Zirconium | 2012 |
Influence of Y-TZP ceramic treatment and different resin cements on bond strength to dentin.
Topics: Adhesiveness; Air Abrasion, Dental; Coated Materials, Biocompatible; Dental Bonding; Dental Stress Analysis; Dentin; Dentin-Bonding Agents; Drug Storage; Hot Temperature; Humans; Materials Testing; Resin Cements; Silanes; Stress, Mechanical; Surface Properties; Tensile Strength; Time Factors; Water; Yttrium; Zirconium | 2012 |
Concentration dependence on the shape and size of sol-gel-derived yttria-stabilized zirconia ceramic features by soft lithographic patterning.
Topics: Gels; Particle Size; Photography; Surface Properties; Temperature; Yttrium; Zirconium | 2012 |
Accelerated aging characteristics of three yttria-stabilized tetragonal zirconia polycrystalline dental materials.
Topics: Ceramics; Crystallography; Dental Materials; Dental Stress Analysis; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Pliability; Pressure; Steam; Sterilization; Stress, Mechanical; Surface Properties; Time Factors; Water; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
Influence of air-abrasion and subsequent heat treatment on bonding between zirconia framework material and indirect composites.
Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Computer-Aided Design; Crystallography; Dental Bonding; Dental Etching; Dental Materials; Dental Stress Analysis; Hot Temperature; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Polyurethanes; Shear Strength; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Water; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
Change in surface properties of zirconia and initial attachment of osteoblastlike cells with hydrophilic treatment.
Topics: 3T3 Cells; Acid Etching, Dental; Air; Aluminum Oxide; Animals; Carbon; Cell Adhesion; Cell Shape; Dental Etching; Hydrofluoric Acid; Hydrophobic and Hydrophilic Interactions; Hydroxides; Mice; Microscopy, Confocal; Nanostructures; Osteoblasts; Oxygen; Photoelectron Spectroscopy; Plasma Gases; Surface Properties; Ultraviolet Rays; Water; Wettability; Yttrium; Zirconium | 2012 |
The effect of translucency of Y-TZP based all-ceramic crowns fabricated with difference substructure designs.
Topics: Color; Crowns; Dental Abutments; Dental Cements; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Veneers; Esthetics, Dental; Humans; Light; Prosthesis Coloring; Spectrophotometry; Surface Properties; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2013 |
Effect of surface treatments on the bond strengths of facing composite resins to zirconia copings.
Topics: Composite Resins; Crowns; Dental Bonding; Dental Etching; Dental Porcelain; Dental Stress Analysis; Hot Temperature; Materials Testing; Resin Cements; Surface Properties; Yttrium; Zirconium | 2012 |
Applying microwave technology to sintering dental zirconia.
Topics: Chemical Phenomena; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Efficiency; Hot Temperature; Materials Testing; Microwaves; Phase Transition; Pliability; Surface Properties; Technology, Dental; Yttrium; Zirconium | 2012 |
Effect of sandblasting on the mechanical properties of Y-TZP zirconia.
Topics: Ceramics; Dental Materials; Dental Stress Analysis; Hardness Tests; Materials Testing; Phase Transition; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
Tetragonal and cubic zirconia multilayered ceramic constructs created by EPD.
Topics: Ceramics; Electric Conductivity; Electrodes; Electrophoresis; Nanostructures; Yttrium; Zirconium | 2013 |
Identification of monoclinic phase in CAD/CAM zirconia FPD frameworks.
Topics: Ceramics; Computer-Aided Design; Crystallization; Dental Materials; Dental Porcelain; Denture Design; Denture, Partial, Fixed; Hot Temperature; Humans; Materials Testing; Phase Transition; Spectrum Analysis, Raman; Surface Properties; Yttrium; Zirconium | 2012 |
Inelastic and elastic mean free paths from FIB samples of metallic glasses.
Topics: Alloys; Aluminum; Copper; Glass; Ions; Iron; Metals; Microscopy, Electron, Scanning; Yttrium; Zirconium | 2013 |
Evaluation of hardness and fracture toughness, coupled with microstructural analysis, of zirconia ceramics stored in environments with different pH values.
Topics: Cold Temperature; Corrosion; Dental Stress Analysis; Hardness; Hydrogen-Ion Concentration; Materials Testing; Pliability; Polymerization; Saliva, Artificial; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
Cyclic fatigue resistance of yttria-stabilized tetragonal zirconia polycrystals with hot isostatic press processing.
Topics: Acid Etching, Dental; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Hot Temperature; Materials Testing; Microscopy, Electron, Scanning; Pressure; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
The failure load of CAD/CAM generated zirconia and glass-ceramic laminate veneers with different preparation designs.
Topics: Acid Etching, Dental; Aluminum Silicates; Cementation; Ceramics; Computer-Aided Design; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Elastic Modulus; Humans; Incisor; Materials Testing; Pliability; Potassium Compounds; Resin Cements; Stress, Mechanical; Surface Properties; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2012 |
Characterizing the transformation near indents and cracks in clinically used dental yttria-stabilized zirconium oxide constructs.
Topics: Dental Prosthesis; Dental Prosthesis Design; Hardness; Materials Testing; Microscopy, Electron, Scanning; Phase Transition; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Effect of core design and veneering technique on damage and reliability of Y-TZP-supported crowns.
Topics: Computer-Aided Design; Crowns; Dental Prosthesis Design; Dental Restoration Failure; Dental Veneers; Materials Testing; Microscopy, Electron, Scanning; Yttrium; Zirconium | 2013 |
Thermo and mechanical cycling and veneering method do not influence Y-TZP core/veneer interface bond strength.
Topics: Analysis of Variance; Ceramics; Chromium Alloys; Cobalt; Dental Bonding; Dental Porcelain; Dental Restoration, Permanent; Dental Stress Analysis; Dental Veneers; Hot Temperature; Materials Testing; Shear Strength; Yttrium; Zirconium | 2013 |
Fracture strength of yttria-stabilized zirconium-dioxide (Y-TZP) fixed dental prostheses (FDPs) with different abutment core thicknesses and connector dimensions.
Topics: Cold Temperature; Dental Abutments; Dental Materials; Dental Prosthesis Design; Dental Restoration Failure; Dental Veneers; Denture Design; Denture, Partial, Fixed; Hot Temperature; Humans; Materials Testing; Post and Core Technique; Stress, Mechanical; Surface Properties; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2013 |
Influence of convergence angle of tooth preparation on the fracture resistance of Y-TZP-based all-ceramic restorations.
Topics: Analysis of Variance; Computer-Aided Design; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Elastic Modulus; Finite Element Analysis; Poisson Distribution; Tooth Preparation; Yttrium; Zirconium | 2013 |
Effects of extreme cooling methods on mechanical properties and shear bond strength of bilayered porcelain/3Y-TZP specimens.
Topics: Analysis of Variance; Cold Temperature; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Materials Testing; Mechanical Phenomena; Pliability; Shear Strength; Statistics, Nonparametric; Survival Analysis; Yttrium; Zirconium | 2013 |
Response of osteoblast-like cells to zirconia with different surface topography.
Topics: 3T3 Cells; Acid Etching, Dental; Alkaline Phosphatase; Aluminum Oxide; Analysis of Variance; Animals; Cell Adhesion; Cell Culture Techniques; Cell Differentiation; Collagen Type I; Gene Expression; Hydrofluoric Acid; Materials Testing; Mice; Microscopy, Electron, Scanning; Osteoblasts; Osteocalcin; Surface Properties; Yttrium; Zirconium | 2013 |
Effect of thickness of zirconia-ceramic crown frameworks on strength and fracture pattern.
Topics: Aluminum Oxide; Analysis of Variance; Ceramics; Cerium; Chromium; Cobalt; Crowns; Dental Alloys; Dental Prosthesis Design; Dental Stress Analysis; Equipment Failure Analysis; Materials Testing; Nanocomposites; Yttrium; Zirconium | 2013 |
Tooth in a bag: same-day monolithic zirconia crown.
Topics: Cementation; Crowns; Dental Impression Technique; Dental Porcelain; Esthetics, Dental; Humans; Image Processing, Computer-Assisted; Practice Management, Dental; Tooth Fractures; Yttrium; Zirconium | 2013 |
Effect of core thickness differences on post-fatigue indentation fracture resistance of veneered zirconia crowns.
Topics: Aluminum Silicates; Computer-Aided Design; Crowns; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Gold Alloys; Humans; Imaging, Three-Dimensional; Materials Testing; Metal Ceramic Alloys; Potassium Compounds; Stress, Mechanical; Surface Properties; User-Computer Interface; Yttrium; Zirconium | 2013 |
Accuracy of ceramic restorations made with two CAD/CAM systems.
Topics: Computer-Aided Design; Crowns; Dental Marginal Adaptation; Dental Porcelain; Dental Prosthesis Design; Humans; Microscopy; Models, Dental; Stainless Steel; Surface Properties; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2013 |
Processing and evaluation of bioactive coatings on polymeric implants.
Topics: Benzophenones; Cell Adhesion; Cell Line; Cell Proliferation; Coated Materials, Biocompatible; Durapatite; Humans; Ketones; Materials Testing; Microscopy, Electron, Scanning; Osteoblasts; Polyethylene Glycols; Polymers; Prostheses and Implants; Spinal Fusion; Yttrium; Zirconium | 2013 |
Low temperature degradation and reliability of one-piece ceramic oral implants with a porous surface.
Topics: Aluminum Oxide; Coated Materials, Biocompatible; Dental Implants; Dental Stress Analysis; Equipment Failure Analysis; Microscopy, Electron, Scanning; Porosity; Surface Properties; Temperature; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Reactivity of metal oxide clusters with hydrogen peroxide and water--a DFT study evaluating the performance of different exchange-correlation functionals.
Topics: Adsorption; Boron Compounds; Hydrogen Bonding; Hydrogen Peroxide; Hydroxyl Radical; Thermodynamics; Titanium; Water; Yttrium; Zirconium | 2013 |
Three-dimensional finite element modelling of all-ceramic restorations based on micro-CT.
Topics: Aluminum Silicates; Ceramics; Compressive Strength; Crowns; Dental Abutments; Dental Materials; Dental Porcelain; Dental Prosthesis; Dental Prosthesis Design; Dental Veneers; Denture Design; Denture, Partial, Fixed; Finite Element Analysis; Humans; Image Processing, Computer-Assisted; Imaging, Three-Dimensional; Potassium Compounds; Software; Stress, Mechanical; Surface Properties; Tensile Strength; X-Ray Microtomography; Yttrium; Zirconium | 2013 |
Wear performance of monolithic dental ceramics with different surface treatments.
Topics: Analysis of Variance; Computer-Aided Design; Dental Polishing; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Wear; Dental Stress Analysis; Humans; Materials Testing; Statistics, Nonparametric; Surface Properties; Yttrium; Zirconium | 2013 |
One-piece zirconia oral implants: one-year results from a prospective case series. 2. Three-unit fixed dental prosthesis (FDP) reconstruction.
Topics: Adult; Alveolar Bone Loss; Ceramics; Cohort Studies; Dental Implants; Dental Materials; Dental Plaque Index; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Denture, Partial, Fixed; Denture, Partial, Temporary; Female; Follow-Up Studies; Humans; Immediate Dental Implant Loading; Male; Mandible; Maxilla; Periodontal Attachment Loss; Periodontal Index; Periodontal Pocket; Porosity; Prospective Studies; Radiography; Surface Properties; Survival Analysis; Treatment Outcome; Yttrium; Zirconium | 2013 |
Effect of water storage on bond strength of self-adhesive resin cements to zirconium oxide ceramic.
Topics: Dental Bonding; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Drug Storage; Materials Testing; Resin Cements; Shear Strength; Water; Yttrium; Zirconium | 2013 |
Silica-based nano-coating on zirconia surfaces using reactive magnetron sputtering: effect on chemical adhesion of resin cements.
Topics: Air Abrasion, Dental; Coated Materials, Biocompatible; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Dentin-Bonding Agents; Hot Temperature; Materials Testing; Nanoparticles; Random Allocation; Resin Cements; Silicon Dioxide; Surface Properties; Water; Yttrium; Zirconium | 2013 |
Phase transformation and subsurface damage in 3Y-TZP after sandblasting.
Topics: Dental Porcelain; Microscopy, Electron, Scanning; Silicon Dioxide; Spectrum Analysis, Raman; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Effect of surface modification on the bond strength between zirconia and resin cement.
Topics: Adhesiveness; Aluminum Oxide; Ceramics; Computer-Aided Design; Dental Bonding; Dental Etching; Dental Materials; Hot Temperature; Humans; Humidity; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Polymerization; Porosity; Resin Cements; Stress, Mechanical; Surface Properties; Temperature; Yttrium; Zirconium | 2013 |
Plastic damage induced fracture behaviors of dental ceramic layer structures subjected to monotonic load.
Topics: Aluminum Silicates; Ceramics; Computer Simulation; Crowns; Dental Materials; Dental Porcelain; Dental Restoration Failure; Dental Veneers; Elastic Modulus; Elasticity; Finite Element Analysis; Humans; Image Processing, Computer-Assisted; Potassium Compounds; Stress, Mechanical; Surface Properties; Tungsten Compounds; Yttrium; Zirconium | 2013 |
Residual stresses in Y-TZP crowns due to changes in the thermal contraction coefficient of veneers.
Topics: Crowns; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Finite Element Analysis; Materials Testing; Models, Theoretical; Temperature; Tensile Strength; Yttrium; Zirconium | 2013 |
The influence of finish line curvature on the marginal gap width of ceramic copings.
Topics: Computer-Aided Design; Crowns; Dental Abutments; Dental Impression Materials; Dental Marginal Adaptation; Dental Porcelain; Dental Prosthesis Design; Humans; Incisor; Resins, Synthetic; Surface Properties; Tooth Preparation, Prosthodontic; Vitallium; Yttrium; Zirconium | 2013 |
Impact of yttria stabilization on Tb3+ intra-shell luminescence efficiency in zirconium dioxide nanopowders.
Topics: Crystallization; Excipients; Luminescent Measurements; Macromolecular Substances; Materials Testing; Molecular Conformation; Nanostructures; Particle Size; Powders; Surface Properties; Terbium; Yttrium; Zirconium | 2013 |
Comparison of an absolute and surrogate measure of relative translucency in dental ceramics.
Topics: Algorithms; Aluminum Oxide; Aluminum Silicates; Ceramics; Dental Porcelain; Humans; Light; Magnesium Oxide; Materials Testing; Radiometry; Spectrophotometry; Surface Properties; Yttrium; Zirconium | 2013 |
In vivo wear performance of highly cross-linked polyethylene vs. yttria stabilized zirconia and alumina stabilized zirconia at a mean seven-year follow-up.
Topics: Adult; Aged; Aged, 80 and over; Aluminum Oxide; Female; Follow-Up Studies; Hip Prosthesis; Humans; Male; Middle Aged; Polyethylene; Prosthesis Design; Young Adult; Yttrium; Zirconium | 2013 |
High-throughput measurement of ionic conductivity in composition-spread thin films.
Topics: Electric Conductivity; Electrodes; High-Throughput Screening Assays; Materials Testing; Microscopy, Electron, Transmission; Nanostructures; Photoelectron Spectroscopy; Yttrium; Zirconium | 2013 |
Osteoblast and bone tissue response to surface modified zirconia and titanium implant materials.
Topics: Analysis of Variance; Animals; Bone and Bones; Cell Proliferation; Cells, Cultured; Core Binding Factor Alpha 3 Subunit; Dental Implants; Femur; Gene Expression Regulation; Humans; Implants, Experimental; Male; Materials Testing; Microscopy, Confocal; Osseointegration; Osteoblasts; Rats; Rats, Sprague-Dawley; Reverse Transcriptase Polymerase Chain Reaction; Statistics, Nonparametric; Surface Properties; Titanium; Transcriptional Activation; Yttrium; Zirconium | 2013 |
Study on nano-structured hydroxyapatite/zirconia stabilized yttria on healing of articular cartilage defect in rabbit.
Topics: Animals; Biocompatible Materials; Cartilage, Articular; Collagen Type II; Durapatite; Male; Materials Testing; Nanostructures; Rabbits; Regeneration; Reproducibility of Results; Surface Properties; Time Factors; Treatment Outcome; Wound Healing; Yttrium; Zirconium | 2013 |
Synthesis, mechanical properties and bioactivity of nanostructured zirconia.
Topics: Biocompatible Materials; Durapatite; Nanostructures; Particle Size; Temperature; Yttrium; Zirconium | 2013 |
Evaluation of air-particle abrasion of Y-TZP with different particles using microstructural analysis.
Topics: Aluminum Oxide; Ceramics; Dental Stress Analysis; Materials Testing; Particle Size; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2013 |
The enigma of the bilayered zirconia restoration.
Topics: Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Dental Veneers; Humans; Yttrium; Zirconium | 2013 |
Fatigue behavior of the resinous cement to zirconia bond.
Topics: Adhesiveness; Aluminum Oxide; Antioxidants; Ceramics; Dental Bonding; Dental Etching; Dental Materials; Humans; Materials Testing; Organosilicon Compounds; Resin Cements; Shear Strength; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2013 |
Post-hot isostatic pressing: a healing treatment for process related defects and laboratory grinding damage of dental zirconia?
Topics: Ceramics; Crystallography; Dental Materials; Dental Polishing; Diamond; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Pliability; Pressure; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Influence of substructure design, veneer application technique, and firing regime on the in vitro performance of molar zirconia crowns.
Topics: Analysis of Variance; Computer-Aided Design; Crowns; Dental Abutments; Dental Casting Technique; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Humans; Metal Ceramic Alloys; Molar; Statistics, Nonparametric; Yttrium; Zirconium | 2013 |
Fracture toughness improvements of dental ceramic through use of yttria-stabilized zirconia (YSZ) thin-film coatings.
Topics: Carbon Compounds, Inorganic; Coated Materials, Biocompatible; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Humans; Materials Testing; Microscopy, Electron, Scanning; Pliability; Silicon Compounds; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Fracture strength of monolithic all-ceramic crowns made of high translucent yttrium oxide-stabilized zirconium dioxide compared to porcelain-veneered crowns and lithium disilicate crowns.
Topics: Ceramics; Crowns; Dental Porcelain; Humans; Materials Testing; Yttrium; Zirconium | 2014 |
Influence of full-contour zirconia surface roughness on wear of glass-ceramics.
Topics: Aluminum Silicates; Ceramics; Computer-Aided Design; Dental Materials; Dental Porcelain; Dental Stress Analysis; Friction; Hot Temperature; Materials Testing; Microscopy, Electron, Scanning; Random Allocation; Surface Properties; Yttrium; Zirconium | 2014 |
Effect of surface treatments on the bonding strength of self-adhesive resin cements to zirconia ceramics.
Topics: Acid Etching, Dental; Adhesiveness; Aluminum Oxide; Dental Bonding; Dental Etching; Dental Materials; Dental Porcelain; Hot Temperature; Materials Testing; Methylene Chloride; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Pliability; Resin Cements; Solvents; Stress, Mechanical; Surface Properties; Temperature; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
An in vitro comparison of shear bond strength of zirconia to enamel using different surface treatments.
Topics: Acid Etching, Dental; Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Ceramics; Dental Bonding; Dental Enamel; Dental Etching; Dental Materials; Dental Stress Analysis; Humans; Hydrogen Peroxide; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Random Allocation; Resin Cements; Shear Strength; Silanes; Stress, Mechanical; Sulfuric Acids; Surface Properties; Temperature; Thiones; Time Factors; Water; Yttrium; Zirconium | 2014 |
Physico-chemical characterization of zirconia-titania composites coated with an apatite layer for dental implants.
Topics: Apatites; Biomimetic Materials; Calcium Phosphates; Chemical Phenomena; Chemical Precipitation; Coated Materials, Biocompatible; Crystallization; Crystallography; Dental Implants; Dental Materials; Dental Prosthesis Design; Desiccation; Filtration; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Pressure; Silicates; Spectroscopy, Fourier Transform Infrared; Surface Properties; Titanium; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
High-throughput continuous hydrothermal synthesis of nanomaterials (part II): unveiling the as-prepared CexZryYzO2-δ phase diagram.
Topics: Cerium; High-Throughput Screening Assays; Nanostructures; Oxygen; Temperature; Yttrium; Zirconium | 2013 |
Influence of proximal supportive design of zirconia framework on fracture load of veneering porcelain.
Topics: Aluminum Oxide; Computer-Aided Design; Dental Etching; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Hot Temperature; Humans; Materials Testing; Stress, Mechanical; Surface Properties; Time Factors; Yttrium; Zirconium | 2013 |
In vitro evaluation of osteoconductivity and cellular response of zirconia and alumina based ceramics.
Topics: Alkaline Phosphatase; Aluminum Oxide; Bone Regeneration; Calcium; Cell Adhesion; Cell Differentiation; Cell Line; Cell Proliferation; Cell Shape; Ceramics; Cerium; Durapatite; Hardness; Humans; Osteoblasts; Particle Size; Phosphorus; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Electrophoretic bilayer deposition of zirconia and reinforced bioglass system on Ti6Al4V for implant applications: an in vitro investigation.
Topics: Alloys; Body Fluids; Cell Adhesion; Cell Count; Cell Line; Ceramics; Coated Materials, Biocompatible; Electricity; Electrochemical Techniques; Electrophoresis; Humans; Materials Testing; Osteoblasts; Prostheses and Implants; Titanium; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Five-year clinical evaluation of zirconia-based bridges in patients in UK general dental practices.
Topics: Adult; Ceramics; Community-Based Participatory Research; Computer-Aided Design; Dental Abutments; Dental Bonding; Dental Caries; Dental Marginal Adaptation; Dental Materials; Dental Restoration Failure; Dental Veneers; Dentin Sensitivity; Denture Design; Denture Repair; Denture Retention; Denture, Partial, Fixed; Follow-Up Studies; Gingiva; Humans; Surface Properties; Survival Analysis; Yttrium; Zirconium | 2013 |
Transparent nanocrystalline yttria-stabilized-zirconia calvarium prosthesis.
Topics: Animals; Bone Substitutes; Light; Mice; Nanoparticles; Optical Imaging; Prostheses and Implants; Skull; Yttrium; Zirconium | 2013 |
Effect of the layering technique on bond strength and cohesive resistance of a porcelain-zirconia system.
Topics: Adhesiveness; Aluminum Silicates; Dental Bonding; Dental Materials; Dental Porcelain; Dental Stress Analysis; Hot Temperature; Humans; Materials Testing; Potassium Compounds; Stress, Mechanical; Surface Properties; Tensile Strength; Yttrium; Zirconium | 2014 |
Effect of autoclave induced low-temperature degradation on the adhesion energy between yttria-stabilized zirconia veneered with porcelain.
Topics: Dental Porcelain; Dental Veneers; Materials Testing; Microscopy, Electron, Scanning; Spectrometry, X-Ray Emission; Temperature; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
The influence of customized abutments and custom metal abutments on the presence of the interproximal papilla at implants inserted in single-unit gaps: a 1-year prospective clinical study.
Topics: Adult; Aged; Aged, 80 and over; Alloys; Alveolar Process; Computer-Aided Design; Crowns; Dental Abutments; Dental Alloys; Dental Implant-Abutment Design; Dental Implants, Single-Tooth; Dental Porcelain; Dental Prosthesis, Implant-Supported; Female; Follow-Up Studies; Gingiva; Gold Alloys; Humans; Male; Maxilla; Middle Aged; Prospective Studies; Survival Analysis; Titanium; Yttrium; Zirconium | 2014 |
Fracture strength and microstructure of Y-TZP zirconia after different surface treatments.
Topics: Aluminum Oxide; Cementation; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Diamond; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Pliability; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Solubility and strength of zirconia-based dental materials after artificial aging.
Topics: Acetic Acid; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Diamond; Hot Temperature; Humans; Materials Testing; Pliability; Solubility; Spectrophotometry, Atomic; Stress, Mechanical; Yttrium; Zirconium | 2013 |
Long-time aging in 3 mol.% yttria-stabilized tetragonal zirconia polycrystals at human body temperature.
Topics: Absorption; Body Temperature; Crystallization; Humans; Microscopy, Electron, Scanning; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
Low-temperature degradation of a Y-TZP ceramic after surface treatments.
Topics: Absorption; Air; Biocompatible Materials; Dental Porcelain; Diamond; Materials Testing; Poisson Distribution; Pressure; Reproducibility of Results; Silicon; Surface Properties; Temperature; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Evidence of yttrium silicate inclusions in YSZ-porcelain veneers.
Topics: Ceramics; Dental Bonding; Dental Porcelain; Dental Prosthesis; Dental Stress Analysis; Dental Veneers; Microscopy, Electron, Scanning; Microscopy, Electron, Transmission; Silicates; Surface Properties; Tomography, X-Ray Computed; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
Effect of multistep processing technique on the formation of micro-defects and residual stresses in zirconia dental restorations.
Topics: Carbon Compounds, Inorganic; Dental Materials; Dental Polishing; Dental Prosthesis Design; Diamond; Elastic Modulus; Elasticity; Hot Temperature; Materials Testing; Microscopy, Electron, Scanning; Phase Transition; Porosity; Pressure; Silicon Compounds; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
Enhancing glass ionomer cement features by using the HA/YSZ nanocomposite: a feed forward neural network modelling.
Topics: Computer Simulation; Durapatite; Fluorides; Glass; Mechanical Phenomena; Nanocomposites; Neural Networks, Computer; Polymers; Yttrium; Zirconium | 2014 |
Simultaneous determinations of zirconium, hafnium, yttrium and lanthanides in seawater according to a co-precipitation technique onto iron-hydroxide.
Topics: Ferric Compounds; Flocculation; Hafnium; Lanthanoid Series Elements; Limit of Detection; Quality Control; Seawater; Spectrophotometry, Atomic; Trace Elements; Yttrium; Zirconium | 2013 |
Effect of particle size on the flexural strength and phase transformation of an airborne-particle abraded yttria-stabilized tetragonal zirconia polycrystal ceramic.
Topics: Aluminum Oxide; Chemical Phenomena; Dental Etching; Dental Materials; Dental Stress Analysis; Humans; Materials Testing; Particle Size; Pliability; Saliva, Artificial; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Antagonist wear of three CAD/CAM anatomic contour zirconia ceramics.
Topics: Aluminum Silicates; Bite Force; Color; Computer-Aided Design; Dental Enamel; Dental Polishing; Dental Porcelain; Dental Restoration Wear; Dental Veneers; Hot Temperature; Humans; Imaging, Three-Dimensional; Materials Testing; Microscopy, Electron, Scanning; Porosity; Potassium Compounds; Surface Properties; Tooth Wear; Yttrium; Zirconium | 2014 |
Residual stress profiles in veneering ceramic on Y-TZP, alumina and ZTA frameworks: measurement by hole-drilling.
Topics: Aluminum Oxide; Ceramics; Dental Veneers; Microscopy, Electron, Scanning; Stress, Mechanical; Yttrium; Zirconium | 2014 |
The potential of novel primers and universal adhesives to bond to zirconia.
Topics: Aluminum Oxide; Ceramics; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Dental Porcelain; Humans; Materials Testing; Methacrylates; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Resin Cements; Silanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Yttrium; Zirconium | 2014 |
Human epithelial tissue culture study on restorative materials.
Topics: Adolescent; Adult; Biocompatible Materials; Cell Adhesion; Cell Culture Techniques; Cell Proliferation; Cells, Cultured; Chromium Alloys; Coloring Agents; Dental Materials; Dental Porcelain; Epithelial Cells; Humans; Indicators and Reagents; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Middle Aged; Mouth Mucosa; Oxazines; Spectrometry, X-Ray Emission; Surface Properties; Tetrazolium Salts; Thiazoles; Time Factors; Xanthenes; Young Adult; Yttrium; Zirconium | 2014 |
Nanosecond laser switching of surface wettability and epitaxial integration of c-axis ZnO thin films with Si(111) substrates.
Topics: Crystallography; Hydrophobic and Hydrophilic Interactions; Lasers; Microscopy, Electron, Transmission; Nanotechnology; Silicon; Surface Properties; Water; Wettability; Yttrium; Zinc Oxide; Zirconium | 2014 |
Parametric appraisal of process parameters for adhesion of plasma sprayed nanostructured YSZ coatings using Taguchi experimental design.
Topics: Metal Nanoparticles; Nanotechnology; Plasma Gases; Powders; Statistics, Nonparametric; Yttrium; Zirconium | 2013 |
Effect of framework design on fracture resistance in zirconia 4-unit all-ceramic fixed partial dentures.
Topics: Cementation; Ceramics; Dental Abutments; Dental Materials; Dental Restoration Failure; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Glass Ionomer Cements; Humans; Materials Testing; Microscopy, Electron, Scanning; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2013 |
Bioactive glass/ZrO2 composites for orthopaedic applications.
Topics: Biocompatible Materials; Body Fluids; Elasticity; Glass; Hardness; Humans; Materials Testing; Microscopy, Electron, Scanning; Orthopedics; Prostheses and Implants; Stress, Mechanical; Surface Properties; Temperature; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
Retrieval analysis of new-generation yttria-stabilized zirconia femoral heads after total hip arthroplasty.
Topics: Aged; Aged, 80 and over; Arthroplasty, Replacement, Hip; Device Removal; Hardness; Hip Prosthesis; Humans; Materials Testing; Middle Aged; Polyethylene; Prosthesis Design; Reoperation; Surface Properties; Yttrium; Zirconium | 2014 |
Effects of differing thickness and mechanical properties of cement on the stress levels and distributions in a three-unit zirconia fixed prosthesis by FEA.
Topics: Ceramics; Computer Simulation; Dental Bonding; Dental Cements; Dental Materials; Denture, Partial, Fixed; Elastic Modulus; Finite Element Analysis; Glass Ionomer Cements; Humans; Magnesium Oxide; Materials Testing; Models, Anatomic; Polycarboxylate Cement; Resin Cements; Stress, Mechanical; Surface Properties; User-Computer Interface; Yttrium; Zinc Oxide; Zirconium | 2014 |
Effect of various veneering techniques on mechanical strength of computer-controlled zirconia framework designs.
Topics: Apatites; Ceramics; Computer-Aided Design; Crowns; Dental Bonding; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Veneers; Elastic Modulus; Finite Element Analysis; Humans; Humidity; Materials Testing; Microscopy, Electron, Scanning; Pliability; Shear Strength; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2014 |
An in vitro comparison of fracture load of zirconia custom abutments with internal connection and different angulations and thickness: part I.
Topics: Ceramics; Computer-Aided Design; Dental Abutments; Dental Implant-Abutment Design; Dental Materials; Dental Stress Analysis; Humans; Materials Testing; Stress, Mechanical; Surface Properties; Torque; Yttrium; Zirconium | 2014 |
Surface alterations of zirconia and titanium substrates after Er,Cr:YSGG irradiation.
Topics: Acid Etching, Dental; Chromium; Erbium; Lasers, Solid-State; Surface Properties; Titanium; Yttrium; Zirconium | 2015 |
Influence of multimode universal adhesives and zirconia primer application techniques on zirconia repair.
Topics: Aluminum Oxide; Ceramics; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Prosthesis Repair; Dental Stress Analysis; Humans; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Polymerization; Resin Cements; Shear Strength; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2014 |
Influence of fine-grain and solid-solution strengthening on mechanical properties and in vitro degradation of WE43 alloy.
Topics: Alloys; Biocompatible Materials; Corrosion; Hot Temperature; Magnesium; Materials Testing; Metals; Pressure; Stents; Stress, Mechanical; Tensile Strength; Vascular Diseases; Yttrium; Zirconium | 2014 |
Radiopacity and cytotoxicity of Portland cement containing zirconia doped bismuth oxide radiopacifiers.
Topics: 3T3 Cells; Aluminum Compounds; Animals; Biocompatible Materials; Bismuth; Calcium Compounds; Calcium Sulfate; Cell Survival; Ceramics; Coloring Agents; Contrast Media; Drug Combinations; Hot Temperature; Materials Testing; Mice; Osteoblasts; Oxides; Root Canal Filling Materials; Silicates; Tetrazolium Salts; Thiazoles; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
Effects of surface-finishing protocols on the roughness, color change, and translucency of different ceramic systems.
Topics: Aluminum Oxide; Ceramics; Color; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Veneers; Diamond; Hot Temperature; Humans; Light; Materials Testing; Metal Ceramic Alloys; Spectrophotometry; Surface Properties; Yttrium; Zirconium | 2014 |
Influence of surface treatment of yttrium-stabilized tetragonal zirconium oxides and cement type on crown retention after artificial aging.
Topics: Aluminum Oxide; Computer-Aided Design; Crowns; Dental Bonding; Dental Etching; Dental Materials; Dental Prosthesis Design; Dental Prosthesis Retention; Dental Stress Analysis; Humans; Materials Testing; Resin Cements; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2014 |
Effect of surface treatment on the bond strength between yttria partially stabilized zirconia ceramics and resin cement.
Topics: Acid Etching, Dental; Animals; Cattle; Computer-Aided Design; Dental Bonding; Dental Materials; Dental Stress Analysis; Dentin; Hydrofluoric Acid; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Tooth Root; Water; Yttrium; Zirconium | 2014 |
Production of 89Zr via the 89Y(p,n)89Zr reaction in aqueous solution: effect of solution composition on in-target chemistry.
Topics: Cyclotrons; Nitric Acid; Protons; Radiochemistry; Radioisotopes; Solutions; Water; Yttrium; Zirconium | 2014 |
Survival of anterior cantilevered all-ceramic resin-bonded fixed dental prostheses made from zirconia ceramic.
Topics: Adolescent; Adult; Air Abrasion, Dental; Aluminum Oxide; Cementation; Ceramics; Dental Etching; Dental Materials; Dental Restoration Failure; Denture Design; Denture, Partial, Fixed, Resin-Bonded; Female; Follow-Up Studies; Humans; Incisor; Male; Middle Aged; Phosphates; Resin Cements; Survival Analysis; Tooth Loss; Treatment Outcome; Young Adult; Yttrium; Zirconium | 2014 |
Fracture strength of all-ceramic (Y-TZP) three- and four-unit fixed dental prostheses with different connector design and production history.
Topics: Cementation; Ceramics; Computer-Aided Design; Dental Abutments; Dental Materials; Dental Restoration Failure; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Hot Temperature; Humans; Materials Testing; Resin Cements; Stress, Mechanical; Surface Properties; Time Factors; Water; Yttrium; Zirconium | 2013 |
A comparison of the marginal fit of crowns fabricated with digital and conventional methods.
Topics: Alginates; Bicuspid; Calcium Sulfate; Ceramics; Computer-Aided Design; Crowns; Dental Impression Materials; Dental Impression Technique; Dental Marginal Adaptation; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Humans; Photography; Polyvinyls; Siloxanes; Surface Properties; Yttrium; Zirconium | 2014 |
Effect of differences in coefficient of thermal expansion of veneer and Y-TZP ceramics on interface phase transformation.
Topics: Algorithms; Ceramics; Computer-Aided Design; Crystallization; Dental Etching; Dental Materials; Dental Stress Analysis; Dental Veneers; Hot Temperature; Humans; Materials Testing; Microscopy, Confocal; Spectrum Analysis, Raman; Stress, Mechanical; Surface Properties; Thermodynamics; Time Factors; Yttrium; Zirconium | 2014 |
Effects of fly ash and boric acid on Y2O3-stabilized tetragonal ZrO2 dispersed with MgAl2O4: An experimental study on rat subcutaneous tissue.
Topics: Aluminum Oxide; Animals; Boric Acids; Coal Ash; Dental Implants; Dental Materials; Inflammation; Lymph Nodes; Magnesium Oxide; Male; Mast Cells; Muscle, Skeletal; Rats; Rats, Wistar; Subcutaneous Tissue; Yttrium; Zirconium | 2015 |
Stability of the bond between two resin cements and an yttria-stabilized zirconia ceramic after six months of aging in water.
Topics: Bisphenol A-Glycidyl Methacrylate; Cementation; Ceramics; Coated Materials, Biocompatible; Dental Bonding; Dental Etching; Dental Materials; Dental Stress Analysis; Electron Probe Microanalysis; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Shear Strength; Silanes; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Water; Yttrium; Zirconium | 2014 |
Evaluation of a commercial primer for bonding of zirconia to two different resin composite cements.
Topics: Acrylates; Composite Resins; Dental Bonding; Dental Materials; Ethylamines; Gas Chromatography-Mass Spectrometry; Humans; Isobutyrates; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; para-Aminobenzoates; Propionates; Resin Cements; Silanes; Spectroscopy, Fourier Transform Infrared; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2014 |
In vitro performance of zirconia and titanium implant/abutment systems for anterior application.
Topics: Bite Force; Ceramics; Computer-Aided Design; Crowns; Dental Implant-Abutment Design; Dental Materials; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Stress Analysis; Humans; Materials Testing; Pliability; Resin Cements; Stress, Mechanical; Surface Properties; Survival Analysis; Temperature; Time Factors; Titanium; Yttrium; Zirconium | 2014 |
Bond strength and Raman analysis of the zirconia-feldspathic porcelain interface.
Topics: Adhesiveness; Aluminum Silicates; Dental Bonding; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Microscopy, Confocal; Microspectrophotometry; Potassium Compounds; Shear Strength; Spectrum Analysis, Raman; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2014 |
Effect of zirconia surface treatment on zirconia/veneer interfacial toughness evaluated by fracture mechanics method.
Topics: Algorithms; Aluminum Oxide; Ceramics; Dental Etching; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Humans; Imaging, Three-Dimensional; Interferometry; Light; Materials Testing; Microscopy, Electron, Scanning; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2014 |
Contrast ratio of six zirconia-based dental ceramics.
Topics: Ceramics; Color; Dental Materials; Dental Stress Analysis; Humans; Light; Materials Testing; Microscopy, Electron, Scanning; Porosity; Spectrometry, Fluorescence; Surface Properties; Yttrium; Zirconium | 2014 |
A novel coping design to decrease maximum principal stress in zirconia ceramic restorations.
Topics: Bite Force; Ceramics; Computer-Aided Design; Crowns; Dental Abutments; Dental Materials; Dental Prosthesis Design; Dental Veneers; Finite Element Analysis; Humans; Imaging, Three-Dimensional; Materials Testing; Nonlinear Dynamics; Resin Cements; Stress, Mechanical; Surface Properties; User-Computer Interface; Yttrium; Zirconium | 2014 |
The use of MDP-based materials for bonding to zirconia.
Topics: Carbon; Cementation; Dental Bonding; Dental Stress Analysis; Dentin-Bonding Agents; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Phosphorus; Polymerization; Resin Cements; Spectrometry, X-Ray Emission; Stress, Mechanical; Surface Properties; Tensile Strength; Time Factors; Water; Yttrium; Zirconium | 2014 |
Effect of varying core thicknesses and artificial aging on the color difference of different all-ceramic materials.
Topics: Ceramics; Color; Dental Materials; Dental Porcelain; Dental Veneers; Humans; Materials Testing; Post and Core Technique; Spectrophotometry; Surface Properties; Time Factors; Yttrium; Zirconium | 2014 |
Association of different primers and resin cements for adhesive bonding to zirconia ceramics.
Topics: Adhesives; Bisphenol A-Glycidyl Methacrylate; Ceramics; Dental Bonding; Dental Materials; Humans; Materials Testing; Methacrylates; Methylmethacrylate; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Resin Cements; Shear Strength; Surface Properties; Thiones; Yttrium; Zirconium | 2014 |
Fracture Strength of Zirconia and Alumina Ceramic Crowns Supported by Implants.
Topics: Aluminum Oxide; Cementation; Ceramics; Computer-Aided Design; Crowns; Dental Abutments; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Stress, Mechanical; Surface Properties; Titanium; Yttrium; Zirconium | 2015 |
Survival-rate analysis of surface treated dental zirconia (Y-TZP) ceramics.
Topics: Ceramics; Dental Alloys; Dental Restoration Failure; Dental Stress Analysis; Humans; Materials Testing; Saliva; Stress, Mechanical; Surface Properties; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
Nickel-based anode with water storage capability to mitigate carbon deposition for direct ethanol solid oxide fuel cells.
Topics: Barium; Carbon; Catalysis; Cerium; Electric Power Supplies; Electrodes; Ethanol; Nickel; Oxides; Water; Yttrium; Zirconium | 2014 |
Adhesion to Y-TZP ceramic: study of silica nanofilm coating on the surface of Y-TZP.
Topics: Coated Materials, Biocompatible; Nanostructures; Silicon Dioxide; Yttrium; Zirconium | 2015 |
[Advantages and disadvantages of applying yttrium stabilized zirconium-dioxide post and core restorations].
Topics: Adult; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Female; Humans; Incisor; Male; Maxilla; Tooth Fractures; Tooth Preparation, Prosthodontic; Tooth Root; Tooth, Nonvital; Yttrium; Zirconium | 2014 |
Three-body wear potential of dental yttrium-stabilized zirconia ceramic after grinding, polishing, and glazing treatments.
Topics: Aluminum Silicates; Carbon Compounds, Inorganic; Ceramics; Computer-Aided Design; Dental Enamel; Dental Materials; Dental Polishing; Dental Porcelain; Diamond; Hot Temperature; Humans; Image Processing, Computer-Assisted; Materials Testing; Potassium Compounds; Silicon Compounds; Stress, Mechanical; Surface Properties; Tooth Abrasion; Tooth Wear; Yttrium; Zirconium | 2014 |
Spark plasma sintered Al₂O₃-YSZ-TiO₂ composites: processing, characterization and in vivo evaluation.
Topics: Aluminum Oxide; Animals; Biocompatible Materials; Femur; Hardness; Hot Temperature; Osseointegration; Pressure; Prostheses and Implants; Rats; Rats, Wistar; Titanium; Yttrium; Zirconium | 2014 |
Factors affecting the mechanical behavior of Y-TZP.
Topics: Materials Testing; Mechanical Phenomena; Solubility; Surface Properties; Temperature; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
Mechanical properties and bonding potential of partially stabilized zirconia treated with different chemomechanical treatments.
Topics: Acid Etching, Dental; Aluminum Oxide; Chlorides; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Stress Analysis; Elastic Modulus; Ethanol; Ferric Compounds; Hardness; Hot Temperature; Hydrochloric Acid; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Pliability; Resin Cements; Shear Strength; Silanes; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
Flexural resistance of Cerec CAD/CAM system ceramic blocks. Part 2: Outsourcing materials.
Topics: Aluminum Oxide; Ceramics; Computer-Aided Design; Dental Porcelain; Elastic Modulus; Humans; Magnesium Oxide; Materials Testing; Pliability; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2014 |
Effect of grinding with diamond-disc and -bur on the mechanical behavior of a Y-TZP ceramic.
Topics: Ceramics; Diamond; Mechanical Phenomena; Structure-Activity Relationship; Surface Properties; Yttrium; Zirconium | 2014 |
Effect of surface treatment and type of cement on push-out bond strength of zirconium oxide posts.
Topics: Bisphenol A-Glycidyl Methacrylate; Chromium Alloys; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Polyethylene Glycols; Polymethacrylic Acids; Post and Core Technique; Resin Cements; Silanes; Stress, Mechanical; Surface Properties; Yttrium; Zinc Phosphate Cement; Zirconium | 2014 |
Surface structure and mechanical properties of impaction-modified Y-TZP.
Topics: Materials Testing; Microscopy, Atomic Force; Surface Properties; Yttrium; Zirconium | 2014 |
Effect of in vitro aging on the flexural strength and probability to fracture of Y-TZP zirconia ceramics for all-ceramic restorations.
Topics: Algorithms; Ceramics; Crystallography; Dental Materials; Elastic Modulus; Materials Testing; Pliability; Probability; Spectroscopy, Fourier Transform Infrared; Spectrum Analysis, Raman; Stress, Mechanical; Surface Properties; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
Genotoxicity test of self-renovated ceramics in primary human peripheral lymphocytes.
Topics: Adult; Cell Proliferation; Cells, Cultured; Ceramics; Comet Assay; DNA Damage; Humans; Lymphocytes; Mutagenicity Tests; Phosphates; Yttrium; Zirconium | 2014 |
Surface roughness of zirconia for full-contour crowns after clinically simulated grinding and polishing.
Topics: Aluminum Silicates; Ceramics; Crowns; Dental Materials; Dental Polishing; Dental Prosthesis Design; Dental Veneers; Diamond; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Potassium Compounds; Pressure; Surface Properties; Time Factors; Water; Yttrium; Zirconium | 2014 |
Preparation of YSZ-TZP solid electrolytes by gel-casting technology.
Topics: Electric Conductivity; Electrolytes; Materials Testing; Mechanical Phenomena; Microscopy, Electron, Scanning; Stress, Mechanical; Temperature; Yttrium; Zirconium | 2011 |
Adhesion mechanisms at the interface between Y-TZP and veneering ceramic with and without modifier.
Topics: Adhesiveness; Ceramics; Coated Materials, Biocompatible; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Veneers; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Porosity; Random Allocation; Silicon Dioxide; Spectrometry, X-Ray Emission; Surface Properties; Wettability; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
Study of nano-hydroxyapatite/zirconia stabilized with yttria in bone healing: histopathological study in rabbit model.
Topics: Animals; Disease Models, Animal; Durapatite; Fracture Healing; Fractures, Bone; Male; Nanoparticles; Rabbits; Random Allocation; Yttrium; Zirconium | 2014 |
Effect of Er,Cr:YSGG laser treatment on microshear bond strength of zirconia to resin cement before and after sintering.
Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Dental Bonding; Dental Etching; Dental Polishing; Hot Temperature; Humidity; Lasers, Solid-State; Materials Testing; Microscopy, Electron, Scanning; Radiation Dosage; Resin Cements; Shear Strength; Silicon Compounds; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2014 |
The strength of sintered and adhesively bonded zirconia/veneer-ceramic bilayers.
Topics: Acid Etching, Dental; Algorithms; Aluminum Oxide; Carbon Compounds, Inorganic; Cementation; Ceramics; Computer-Aided Design; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Veneers; Elastic Modulus; Finite Element Analysis; Hot Temperature; Humans; Hydrofluoric Acid; Microscopy, Electron, Scanning; Phosphates; Pliability; Resin Cements; Silanes; Silicon Compounds; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2014 |
Quantitative phase analysis from X-ray diffraction in Y-TZP dental ceramics: a critical evaluation.
Topics: Algorithms; Carbon Compounds, Inorganic; Ceramics; Crystallography; Dental Etching; Dental Materials; Hafnium; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Models, Chemical; Oxides; Silicon Compounds; Spectrometry, X-Ray Emission; Surface Properties; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
Comparison of fatigue resistance and failure modes between metal-ceramic and all-ceramic crowns by cyclic loading in water.
Topics: Ceramics; Computer-Aided Design; Crowns; Dental Materials; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Gold Alloys; Hardness; Humans; Materials Testing; Metal Ceramic Alloys; Microscopy, Electron, Scanning; Random Allocation; Stress, Mechanical; Surface Properties; Tungsten Compounds; Water; Yttrium; Zirconium | 2014 |
Indentation size effect of Y-TZP dental ceramics.
Topics: Ceramics; Coloring Agents; Dental Materials; Dental Polishing; Dental Stress Analysis; Hardness; Materials Testing; Models, Chemical; Surface Properties; Yttrium; Zirconium | 2014 |
Effect of different laser surface treatment on microshear bond strength between zirconia ceramic and resin cement.
Topics: Adhesiveness; Aluminum Oxide; Ceramics; Dental Bonding; Dental Etching; Dental Materials; Dental Stress Analysis; Humans; Humidity; Lasers; Lasers, Gas; Lasers, Solid-State; Light-Curing of Dental Adhesives; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2015 |
Effect of surface and heat treatments on the biaxial flexural strength and phase transformation of a Y-TZP ceramic.
Topics: Aluminum Oxide; Crystallography; Dental Etching; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Diamond; Elastic Modulus; Hot Temperature; Materials Testing; Pliability; Silicon Dioxide; Stress, Mechanical; Surface Properties; Water; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
Making yttria-stabilized tetragonal zirconia translucent.
Topics: Models, Chemical; Yttrium; Zirconium | 2014 |
Effect of connector design on fracture resistance in all-ceramic fixed partial dentures for mandibular incisor region.
Topics: Bite Force; Cementation; Crowns; Dental Abutments; Dental Materials; Dental Restoration Failure; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Glass Ionomer Cements; Humans; Incisor; Jaw, Edentulous, Partially; Mandible; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2014 |
Posttreatment diagnosis of caries under fixed restorations: a pilot study.
Topics: Chromium Alloys; Cone-Beam Computed Tomography; Crowns; Dental Caries; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dentin; Feasibility Studies; Humans; Image Processing, Computer-Assisted; Metal Ceramic Alloys; Pilot Projects; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2014 |
The combined effect of alumina and silica co-doping on the ageing resistance of 3Y-TZP bioceramics.
Topics: Aluminum Oxide; Dental Porcelain; Hardness; Materials Testing; Particle Size; Porosity; Silicon Dioxide; Surface Properties; Temperature; Yttrium; Zirconium | 2015 |
Effects of aging procedures on the topographic surface, structural stability, and mechanical strength of a ZrO2-based dental ceramic.
Topics: Algorithms; Ceramics; Crystallography; Dental Materials; Imaging, Three-Dimensional; Materials Testing; Pliability; Random Allocation; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
Influence of zirconia surface treatment on veneering porcelain shear bond strength after cyclic loading.
Topics: Aluminum Oxide; Ceramics; Computer-Aided Design; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Diamond; Hot Temperature; Humans; Materials Testing; Pressure; Shear Strength; Stress, Mechanical; Surface Properties; Time Factors; Yttrium; Zirconium | 2014 |
Evaluation of roughness, wettability, and morphology of an yttria-stabilized tetragonal zirconia polycrystal ceramic after different airborne-particle abrasion protocols.
Topics: Aluminum Oxide; Ceramics; Coated Materials, Biocompatible; Dental Etching; Dental Materials; Hot Temperature; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Particle Size; Silanes; Silicon Dioxide; Surface Properties; Time Factors; Wettability; Yttrium; Zirconium | 2014 |
Influence of CAD/CAM on the fit accuracy of implant-supported zirconia and cobalt-chromium fixed dental prostheses.
Topics: Ceramics; Chromium Alloys; Computer-Aided Design; Dental Abutments; Dental Casting Technique; Dental Implant-Abutment Design; Dental Impression Technique; Dental Marginal Adaptation; Dental Materials; Dental Prosthesis, Implant-Supported; Denture Design; Denture Retention; Denture, Partial, Fixed; Hardness; Hot Temperature; Humans; Microscopy, Electron, Scanning; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2015 |
Effect of hydrothermal degradation on three types of zirconias for dental application.
Topics: Ceramics; Crystallography; Dental Materials; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Pliability; Pressure; Spectrometry, X-Ray Emission; Steam; Stress, Mechanical; Surface Properties; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
Protection of yttria-stabilized zirconia for dental applications by oxidic PVD coating.
Topics: Aluminum Oxide; Coated Materials, Biocompatible; Dental Porcelain; Elastic Modulus; Electroplating; Gases; Hardness; Materials Testing; Oxidation-Reduction; Surface Properties; Tensile Strength; Titanium; Yttrium; Zirconium | 2015 |
Bending strength of zirconia/porcelain functionally graded materials prepared using spark plasma sintering.
Topics: Aluminum Silicates; Ceramics; Dental Materials; Dental Porcelain; Elastic Modulus; Electrochemical Techniques; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Plasma Gases; Pliability; Potassium Compounds; Powders; Pressure; Quartz; Stress, Mechanical; Surface Properties; Temperature; Vacuum; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
A comparative study of sliding wear of nonmetallic dental restorative materials with emphasis on micromechanical wear mechanisms.
Topics: Aluminum Silicates; Ceramics; Dental Materials; Dental Restoration Wear; Materials Testing; Yttrium; Zirconium | 2015 |
Efficacy of ceramic repair material on the bond strength of composite resin to zirconia ceramic.
Topics: Ceramics; Composite Resins; Computer-Aided Design; Dental Bonding; Dental Materials; Dental Polishing; Dental Prosthesis Repair; Dental Stress Analysis; Diamond; Humans; Materials Testing; Random Allocation; Resin Cements; Shear Strength; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2015 |
In vitro shear bond strength of two self-adhesive resin cements to zirconia.
Topics: Acrylates; Ceramics; Coated Materials, Biocompatible; Composite Resins; Curing Lights, Dental; Dental Bonding; Dental Materials; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Nanocomposites; Polymerization; Resin Cements; Shear Strength; Silanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2015 |
Quantification of the amount of blue light passing through monolithic zirconia with respect to thickness and polymerization conditions.
Topics: Aluminum Silicates; Ceramics; Curing Lights, Dental; Dental Materials; Dental Porcelain; Humans; Light; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Polymerization; Potassium Compounds; Spectrum Analysis; Surface Properties; Yttrium; Zirconium | 2015 |
Phase transformation of dental zirconia following artificial aging.
Topics: Dental Prosthesis; Humans; Phase Transition; Surface Properties; Yttrium; Zirconium | 2015 |
In vitro evaluation of the internal and marginal misfit of CAD/CAM zirconia copings.
Topics: Cementation; Ceramics; Computer-Aided Design; Crowns; Dental Abutments; Dental Marginal Adaptation; Dental Materials; Dental Prosthesis Design; Dental Stress Analysis; Humans; Image Processing, Computer-Assisted; Materials Testing; Microscopy; Photography; Stress, Mechanical; Surface Properties; Titanium; Yttrium; Zinc Phosphate Cement; Zirconium | 2015 |
Effect of surface treatments on the shear bond strength of luting cements to Y-TZP ceramic.
Topics: Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Ceramics; Coated Materials, Biocompatible; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Stress Analysis; Glass Ionomer Cements; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Shear Strength; Silanes; Silicon Dioxide; Spectrometry, X-Ray Emission; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2015 |
Methacrylate bonding to zirconia by in situ silica nanoparticle surface deposition.
Topics: Dental Bonding; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Nanoparticles; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2015 |
Self-adhesive resin cements: adhesive performance to indirect restorative ceramics.
Topics: Acid Etching, Dental; Dental Bonding; Dental Porcelain; Humans; Hydrofluoric Acid; Materials Testing; Resin Cements; Self-Curing of Dental Resins; Silanes; Stress, Mechanical; Temperature; Tensile Strength; Time Factors; Water; Yttrium; Zirconium | 2014 |
Efficacy of surface roughness and bond strength of Y-TZP zirconia after various pre-treatments.
Topics: Air Abrasion, Dental; Ceramics; Dental Bonding; Lasers, Solid-State; Materials Testing; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2015 |
Contact fatigue of veneer feldspathic porcelain on dental zirconia.
Topics: Aluminum Silicates; Corrosion; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Humidity; Materials Testing; Microscopy, Confocal; Microscopy, Electron, Scanning; Potassium Compounds; Saliva, Artificial; Surface Properties; Time Factors; Yttrium; Zirconium | 2015 |
Aging resistance of surface-treated dental zirconia.
Topics: Acrylic Resins; Aluminum Oxide; Composite Resins; Dental Etching; Dental Porcelain; Materials Testing; Polyurethanes; Silicon Dioxide; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2015 |
Wettability and surface free energy of polarised ceramic biomaterials.
Topics: Biocompatible Materials; Bone and Bones; Calcium Phosphates; Carbonates; Ceramics; Durapatite; Surface Properties; Wettability; X-Ray Diffraction; Yttrium; Zirconium | 2015 |
Osteogenic responses to zirconia with hydroxyapatite coating by aerosol deposition.
Topics: 3T3 Cells; Aerosols; Alkaline Phosphatase; Animals; Anthraquinones; Cell Adhesion; Cell Proliferation; Ceramics; Coated Materials, Biocompatible; Coloring Agents; Dental Materials; Durapatite; Mice; Microscopy, Confocal; Microscopy, Electron, Scanning; Niobium; Osseointegration; Osteoblasts; Osteogenesis; Oxides; Surface Properties; Tantalum; Titanium; Wettability; X-Ray Diffraction; Yttrium; Zirconium | 2015 |
Characterization of magnesia-doped yttria-stabilized zirconia powders for dental technology applications.
Topics: Adsorption; Gels; Magnesium Oxide; Microscopy, Electron, Scanning; Nitrogen; Powders; Spectroscopy, Fourier Transform Infrared; Technology, Dental; Temperature; Yttrium; Zirconium | 2014 |
Enhanced reliability of yttria-stabilized zirconia for dental applications.
Topics: Arthroplasty; Ceramics; Cerium; Dental Materials; Dental Stress Analysis; Humidity; Materials Testing; Porosity; Pressure; Reproducibility of Results; Stress, Mechanical; Surface Properties; Temperature; Yttrium; Zirconium | 2015 |
Effect of various intermediate ceramic layers on the interfacial stability of zirconia core and veneering ceramics.
Topics: Aluminum Silicates; Apatites; Ceramics; Chromium Alloys; Dental Bonding; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Diffusion; Humans; Materials Testing; Metal Ceramic Alloys; Microscopy, Electron, Scanning; Potassium Compounds; Shear Strength; Spectrometry, X-Ray Emission; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2015 |
Highly-translucent, strong and aging-resistant 3Y-TZP ceramics for dental restoration by grain boundary segregation.
Topics: Cations; Ceramics; Crystallization; Dental Restoration, Permanent; Hardness; Kinetics; Lanthanum; Oxides; Particle Size; Time Factors; Yttrium; Zirconium | 2015 |
Lifetime comparison of Y-TZP/porcelain crowns under different loading conditions.
Topics: Computer-Aided Design; Crowns; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Metal Ceramic Alloys; Sound; Stress, Mechanical; Yttrium; Zirconium | 2015 |
Effect of low-temperature aging on the mechanical behavior of ground Y-TZP.
Topics: Mechanical Phenomena; Phase Transition; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2015 |
Effects of different polishing protocols on the surface roughness of Y-TZP surfaces used for custom-made implant abutments: a controlled morphologic SEM and profilometric pilot study.
Topics: Ceramics; Computer-Aided Design; Dental Abutments; Dental Implants; Dental Materials; Dental Polishing; Humans; Materials Testing; Microscopy, Electron, Scanning; Optical Imaging; Pilot Projects; Rubber; Surface Properties; Yttrium; Zirconium | 2015 |
Effect of hydrofluoric acid concentration and etching duration on select surface roughness parameters for zirconia.
Topics: Acid Etching, Dental; Carbon Compounds, Inorganic; Ceramics; Dental Materials; Humans; Hydrofluoric Acid; Materials Testing; Microscopy, Confocal; Microscopy, Electron, Scanning; Silicon Compounds; Surface Properties; Time Factors; Yttrium; Zirconium | 2015 |
The effect of graded glass-zirconia structure on the bond between core and veneer in layered zirconia restorations.
Topics: Glass; Materials Testing; Mechanical Phenomena; Nanotechnology; Wettability; Yttrium; Zirconium | 2015 |
Shear bond strength between resin cement and colored zirconia made with metal chlorides.
Topics: Ceramics; Chlorides; Chromium Compounds; Color; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Stress Analysis; Humans; Materials Testing; Metals; Methacrylates; Molybdenum; Resin Cements; Shear Strength; Stress, Mechanical; Temperature; Time Factors; Water; Yttrium; Zirconium | 2015 |
Mechanical performance of implant-supported posterior crowns.
Topics: Ceramics; Composite Resins; Compressive Strength; Computer-Aided Design; Crowns; Dental Abutments; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Elastic Modulus; Finite Element Analysis; Humans; Materials Testing; Pliability; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2015 |
Biological activation of zirconia surfaces by chemical modification with IGF-1.
Topics: Bacterial Adhesion; Cell Adhesion; Cell Adhesion Molecules; Cytoskeleton; Epithelial Cells; Gene Expression Regulation; Gingiva; Humans; Immobilized Proteins; Insulin-Like Growth Factor I; Integrin beta4; Kalinin; Photoelectron Spectroscopy; RNA, Messenger; Spectroscopy, Fourier Transform Infrared; Streptococcus gordonii; Surface Properties; Yttrium; Zirconium | 2015 |
Proliferation and osteogenic response of MC3T3-E1 pre-osteoblastic cells on porous zirconia ceramics stabilized with magnesia or yttria.
Topics: Animals; Bone and Bones; Calcification, Physiologic; Calcium; Cell Adhesion; Cell Line; Cell Proliferation; Cell Survival; Ceramics; Collagen; Gene Expression Regulation; Magnesium Oxide; Mice; Osteoblasts; Osteogenesis; Porosity; Real-Time Polymerase Chain Reaction; RNA, Messenger; Spectrometry, X-Ray Emission; Tissue Scaffolds; X-Ray Diffraction; Yttrium; Zirconium | 2015 |
Influence of coloring procedure on flexural resistance of zirconia blocks.
Topics: Ceramics; Color; Coloring Agents; Computer-Aided Design; Dental Materials; Dental Stress Analysis; Elastic Modulus; Hot Temperature; Humans; Materials Testing; Pliability; Stress, Mechanical; Yttrium; Zirconium | 2015 |
Effect of surface treatments on the biaxial flexural strength, phase transformation, and surface roughness of bilayered porcelain/zirconia dental ceramics.
Topics: Algorithms; Aluminum Oxide; Ceramics; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Veneers; Diamond; Elastic Modulus; Humans; Materials Testing; Particle Size; Pliability; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2015 |
A critical evaluation of bond strength tests for the assessment of bonding to Y-TZP.
Topics: Aluminum Oxide; Composite Resins; Dental Bonding; Dental Porcelain; Dental Stress Analysis; In Vitro Techniques; Materials Testing; Reproducibility of Results; Resin Cements; Shear Strength; Silanes; Silicon Dioxide; Surface Properties; Tensile Strength; Yttrium; Zirconium | 2015 |
Surface roughened zirconia: towards hydrothermal stability.
Topics: Dental Materials; Diffusion; Materials Testing; Mechanical Phenomena; Optical Phenomena; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2015 |
Degree of conversion of dual-polymerizing cements light polymerized through monolithic zirconia of different thicknesses and types.
Topics: Ceramics; Dental Materials; Humans; Light; Light-Curing of Dental Adhesives; Materials Testing; Polymerization; Radiation Dosage; Resin Cements; Self-Curing of Dental Resins; Spectroscopy, Fourier Transform Infrared; Surface Properties; Time Factors; Yttrium; Zirconium | 2015 |
Evaluation of marginal and internal fit of ceramic and metallic crown copings using x-ray microtomography (micro-CT) technology.
Topics: Aluminum Oxide; Ceramics; Chromium Alloys; Crowns; Dental Etching; Dental Marginal Adaptation; Dental Materials; Dental Porcelain; Image Processing, Computer-Assisted; Materials Testing; Surface Properties; X-Ray Microtomography; Yttrium; Zirconium | 2015 |
Effect of simulated mastication on the surface roughness of three ceramic systems.
Topics: Aluminum Silicates; Ceramics; Computer-Aided Design; Dental Enamel; Dental Materials; Dental Polishing; Dental Porcelain; Hot Temperature; In Vitro Techniques; Mastication; Materials Testing; Potassium Compounds; Surface Properties; Time Factors; Vacuum; Yttrium; Zirconium | 2015 |
Effect of femtosecond laser beam angle on bond strength of zirconia-resin cement.
Topics: Dental Bonding; Dental Cements; Lasers; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Time Factors; Yttrium; Zirconium | 2015 |
Can application of universal primers alone be a substitute for airborne-particle abrasion to improve adhesion of resin cement to zirconia?
Topics: Adhesiveness; Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Resin Cements; Shear Strength; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Water; Wettability; Yttrium; Zirconium | 2015 |
Veneer Ceramic to Y-TZP Bonding: Comparison of Different Surface Treatments.
Topics: Ceramics; Dental Bonding; Dental Porcelain; Dental Veneers; Humans; Materials Testing; Microscopy, Electron, Scanning; Shear Strength; Surface Properties; Yttrium; Zirconium | 2016 |
Application of Micro-Raman Spectroscopy to the Study of Yttria-Stabilized Tetragonal Zirconia Polycrystal (Y-TZP) Phase Transformation.
Topics: Crystallization; Phase Transition; Spectrum Analysis, Raman; Stress, Mechanical; Yttrium; Zirconium | 2015 |
Influence of CAD-CAM diamond bur deterioration on surface roughness and maximum failure load of Y-TZP-based restorations.
Topics: Aluminum Silicates; Cementation; Ceramics; Computer-Aided Design; Dental Materials; Dental Porcelain; Dental Restoration, Permanent; Dental Veneers; Diamond; Elastic Modulus; Epoxy Resins; Glass; Humans; Materials Testing; Microscopy, Electron, Scanning; Potassium Compounds; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2015 |
Ultra-high-molecular-weight polyethylene fiber reinforced dental composites: Effect of fiber surface treatment on mechanical properties of the composites.
Topics: Dental Bonding; Dental Restoration, Permanent; Humans; Materials Testing; Microscopy, Electron, Scanning; Pliability; Polyethylenes; Silanes; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2015 |
Bonding Effectiveness to Differently Sandblasted Dental Zirconia.
Topics: Aluminum Oxide; Ceramics; Dental Bonding; Dental Etching; Dental Materials; Elastic Modulus; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Random Allocation; Resin Cements; Silanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Water; Yttrium; Zirconium | 2015 |
The effect of air-abrasion and heat treatment on the fracture behavior of Y-TZP.
Topics: Air Abrasion, Dental; Dental Bonding; Dental Restoration, Permanent; Dental Stress Analysis; Hot Temperature; Humans; Materials Testing; Yttrium; Zirconium | 2015 |
Influence of thermal expansion mismatch on residual stress profile in veneering ceramic layered on zirconia: Measurement by hole-drilling.
Topics: Chemical Phenomena; Compressive Strength; Dental Restoration, Permanent; Dental Stress Analysis; Dental Veneers; Humans; Stress, Mechanical; Temperature; Tensile Strength; Yttrium; Zirconium | 2015 |
Clinical and Patient-reported Outcomes of a Zirconia Oral Implant: Three-year Results of a Prospective Cohort Investigation.
Topics: Crowns; Dental Implants; Dental Restoration Failure; Female; Humans; Male; Patient Satisfaction; Prospective Studies; Treatment Outcome; Yttrium; Zirconium | 2015 |
Effect of Thickness, Processing Technique and Cooling Rate Protocol on the μTBS of a Bilayer Ceramic System.
Topics: Adhesiveness; Aluminum Silicates; Ceramics; Dental Bonding; Dental Stress Analysis; Dental Veneers; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Potassium Compounds; Stress, Mechanical; Surface Properties; Tensile Strength; Time Factors; Water; Yttrium; Zirconium | 2015 |
Effect of Adhesive Resin Type for Bonding to Zirconia Using Two Surface Pretreatments.
Topics: Acid Etching, Dental; Adhesiveness; Air Abrasion, Dental; Aluminum Oxide; Ceramics; Dental Bonding; Dental Cements; Dental Etching; Humans; Hydrolysis; Materials Testing; Methacrylates; Random Allocation; Resin Cements; Shear Strength; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2015 |
Effects of Acid Treatment on Dental Zirconia: An In Vitro Study.
Topics: Acetic Acid; Citric Acid; Dental Materials; Dental Prosthesis; Humans; Hydrofluoric Acid; Materials Testing; Microscopy, Electron, Scanning; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2015 |
Fracture strength of ceramic monolithic crown systems of different thickness.
Topics: Ceramics; Crowns; Dental Porcelain; Dental Stress Analysis; Humans; Materials Testing; Yttrium; Zirconium | 2015 |
Effect of low-temperature degradation on the mechanical and microstructural properties of tooth-colored 3Y-TZP ceramics.
Topics: Ceramics; Color; Erbium; Ferric Compounds; Hardness; Materials Testing; Mechanical Phenomena; Oxides; Surface Properties; Temperature; Tooth; Yttrium; Zirconium | 2016 |
Effect of air-abrasion regimens and fine diamond bur grinding on flexural strength, Weibull modulus and phase transformation of zirconium dioxide.
Topics: Dental Materials; Dental Polishing; Diamond; Shear Strength; Surface Properties; Yttrium; Zirconium | 2015 |
Structural and Chemical Analysis of the Zirconia-Veneering Ceramic Interface.
Topics: Aluminum; Aluminum Oxide; Argon; Calcium; Ceramics; Dental Etching; Dental Materials; Dental Polishing; Dental Veneers; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Microscopy, Electron, Transmission; Nanoparticles; Silicon; Spectrometry, X-Ray Emission; Spectrum Analysis, Raman; Stress, Mechanical; Surface Properties; Thermodynamics; Yttrium; Zirconium | 2016 |
Application of zirconium dioxide nanoparticle sorbent for the clean-up step in post-harvest pesticide residue analysis.
Topics: Adsorption; Chromatography, Liquid; Citrus sinensis; Limit of Detection; Linear Models; Nanoparticles; Nanotubes, Carbon; Pesticide Residues; Pyrus; Safety; Solid Phase Extraction; Soot; Tandem Mass Spectrometry; Time Factors; Yttrium; Zirconium | 2015 |
Improved production and processing of ⁸⁹Zr using a solution target.
Topics: Cyclotrons; Hydroxamic Acids; Radiochemistry; Radioisotopes; Solutions; Yttrium; Zirconium | 2016 |
Effect of grain size on the monoclinic transformation, hardness, roughness, and modulus of aged partially stabilized zirconia.
Topics: Dental Materials; Elastic Modulus; Hardness; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Pliability; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2015 |
Wear studies on plasma-sprayed Al2O3 and 8mole% of Yttrium-stabilized ZrO2 composite coating on biomedical Ti-6Al-4V alloy for orthopedic joint application.
Topics: Alloys; Aluminum Oxide; Biocompatible Materials; Ceramics; Hardness; Humans; Joint Prosthesis; Materials Testing; Orthopedics; Plasma; Titanium; Yttrium; Zirconium | 2015 |
Radiopacity of Esthetic Post Materials: Evaluation with Digital Analysis Technique.
Topics: Dental Materials; Dental Prosthesis; Dentin; Esthetics, Dental; Humans; Incisor; Post and Core Technique; Radiography, Dental, Digital; Waxes; Yttrium; Zirconium | 2017 |
Aging Effect of Atmospheric Air on Zirconia Surfaces Treated by Nonthermal Plasma.
Topics: Air; Argon; Carbon; Coated Materials, Biocompatible; Humans; Hydrophobic and Hydrophilic Interactions; Materials Testing; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Oxygen; Plasma Gases; Silicon; Siloxanes; Spectrometry, X-Ray Emission; Surface Properties; Surface Tension; Time Factors; Wettability; Yttrium; Zirconium | 2015 |
Shear Bond Strength of MDP-Containing Self-Adhesive Resin Cement and Y-TZP Ceramics: Effect of Phosphate Monomer-Containing Primers.
Topics: Dental Bonding; Dental Cements; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Phosphates; Resin Cements; Shear Strength; Yttrium; Zirconium | 2015 |
Fracture Strength of Aged Monolithic and Bilayer Zirconia-Based Crowns.
Topics: Animals; Cattle; Compressive Strength; Crowns; Dental Prosthesis Design; Dental Stress Analysis; Equipment Failure Analysis; Hardness; Incisor; Stress, Mechanical; Tensile Strength; Yttrium; Zirconium | 2015 |
Bacterial adhesion on biomedical surfaces covered by yttria stabilized zirconia.
Topics: Bacterial Adhesion; Microscopy, Electron, Scanning; Surface Properties; Yttrium; Zirconium | 2016 |
Microbial adhesion on novel yttria-stabilized tetragonal zirconia (Y-TZP) implant surfaces with nitrogen-doped hydrogenated amorphous carbon (a-C:H:N) coatings.
Topics: Animals; Bacterial Adhesion; Candida albicans; Carbon; Cattle; Coated Materials, Biocompatible; Dental Materials; Enterococcus faecalis; Escherichia coli; Materials Testing; Microscopy, Electron, Scanning; Nitrogen; Pseudomonas aeruginosa; Staining and Labeling; Staphylococcus aureus; Stem Cells; Yttrium; Zirconium | 2016 |
Preparation, characterization and in vitro response of bioactive coatings on polyether ether ketone.
Topics: Animals; Benzophenones; Cell Line; Coated Materials, Biocompatible; Durapatite; Ketones; Materials Testing; Mice; Osteoblasts; Polyethylene Glycols; Polymers; Yttrium; Zirconium | 2017 |
Evaluation of Different Polishing Systems and Speeds for Dental Zirconia.
Topics: Dental Polishing; Dental Prosthesis; Humans; Surface Properties; Yttrium; Zirconium | 2017 |
Proliferation and osteogenic differentiation of human mesenchymal stem cells on zirconia and titanium with different surface topography.
Topics: Acid Etching, Dental; Cell Differentiation; Cell Proliferation; Cells, Cultured; Humans; Materials Testing; Mesenchymal Stem Cells; Microscopy, Electron, Scanning; Osteogenesis; Surface Properties; Titanium; Yttrium; Zirconium | 2015 |
Translucency and flexural strength of monolithic translucent zirconia and porcelain-layered zirconia.
Topics: Color; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Materials Testing; Pliability; Surface Properties; Tensile Strength; Yttrium; Zirconium | 2015 |
The influence of colored zirconia on the optical properties of all-ceramic restorations.
Topics: Ceramics; Color; Crowns; Dental Prosthesis Design; Dental Veneers; Materials Testing; Optics and Photonics; Prosthesis Coloring; Yttrium; Zirconium | 2015 |
Osteoblast integration of dental implant materials after challenge by sub-gingival pathogens: a co-culture study in vitro.
Topics: Acid Etching, Dental; Alloys; Bacterial Adhesion; Bacteriological Techniques; Biofilms; Cell Adhesion; Cell Culture Techniques; Cell Line, Tumor; Cell Movement; Ceramics; Coculture Techniques; Dental Alloys; Dental Etching; Dental Implants; Dental Materials; Dental Polishing; Humans; Osseointegration; Osteoblasts; Porphyromonas gingivalis; Prevotella intermedia; Surface Properties; Titanium; Yttrium; Zirconium | 2015 |
Effect of grinding and heat treatment on the mechanical behavior of zirconia ceramic.
Topics: Ceramics; Diamond; Hot Temperature; Materials Testing; Microscopy, Electron, Scanning; Pliability; Reproducibility of Results; Stress, Mechanical; Surface Properties; Tensile Strength; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2016 |
[Effects of colorants on yttria stabilized tetragonal zirconia polycrystals powder].
Topics: Color; Dental Stress Analysis; Ferric Compounds; Humans; Materials Testing; Yttrium; Zirconium | 2015 |
Fatigue behavior of Y-TZP ceramic after surface treatments.
Topics: Ceramics; Materials Testing; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2016 |
Fractographic principles applied to Y-TZP mechanical behavior analysis.
Topics: Materials Testing; Mechanical Phenomena; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2016 |
Effects of multiple firings on the low-temperature degradation of dental yttria-stabilized tetragonal zirconia.
Topics: Cold Temperature; Dental Porcelain; Humans; Materials Testing; Surface Properties; Temperature; Yttrium; Zirconium | 2016 |
Grinding damage assessment on four high-strength ceramics.
Topics: Ceramics; Computer-Aided Design; Dental Materials; Dental Porcelain; Dental Stress Analysis; Hardness; Materials Testing; Microscopy, Electron, Scanning; Surface Properties; Yttrium; Zirconium | 2016 |
Comparison of resin bonding improvements to zirconia between one-bottle universal adhesives and tribochemical silica coating, which is better?
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Materials; Dentin-Bonding Agents; Methacrylates; Photoelectron Spectroscopy; Resin Cements; Silanes; Silicon Dioxide; Spectroscopy, Fourier Transform Infrared; Thermodynamics; Yttrium; Zirconium | 2016 |
Hydrothermal degradation of a 3Y-TZP translucent dental ceramic: A comparison of numerical predictions with experimental data after 2 years of aging.
Topics: Ceramics; Dental Materials; Dental Stress Analysis; Elastic Modulus; Hardness; Hot Temperature; Materials Testing; Models, Statistical; Phase Transition; Surface Properties; Yttrium; Zirconium | 2016 |
Interaction of zirconia primers with yttria-stabilized zirconia surfaces.
Topics: Dental Materials; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Solubility; Spectrometry, X-Ray Emission; Spectroscopy, Fourier Transform Infrared; Surface Properties; Yttrium; Zirconium | 2016 |
Complexity of the relationships between the sintering-temperature-dependent grain size, airborne-particle abrasion, ageing and strength of 3Y-TZP ceramics.
Topics: Air Abrasion, Dental; Dental Porcelain; Dental Stress Analysis; Hot Temperature; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Pliability; Surface Properties; Yttrium; Zirconium | 2016 |
Failure modes of Y-TZP abutments with external hex implant-abutment connection determined by fractographic analysis.
Topics: Ceramics; Dental Abutments; Dental Restoration Failure; Dental Stress Analysis; Materials Testing; Yttrium; Zirconium | 2016 |
Durability of Resin-Zirconia Bonds Produced Using Methods Available in Dental Practice.
Topics: Aluminum Oxide; Ceramics; Coated Materials, Biocompatible; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Humans; Materials Testing; Phosphates; Resin Cements; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Water; Yttrium; Zirconium | 2016 |
Fatigue limit of polycrystalline zirconium oxide ceramics: Effect of grinding and low-temperature aging.
Topics: Ceramics; Materials Testing; Surface Properties; Temperature; Yttrium; Zirconium | 2016 |
Effects of Hot Chemical Etching and 10-Metacryloxydecyl Dihydrogen Phosphate (MDP) Monomer on the Bond Strength of Zirconia Ceramics to Resin-Based Cements.
Topics: Ceramics; Dental Bonding; Dental Etching; Dental Stress Analysis; Humans; Methacrylates; Resin Cements; Shear Strength; Yttrium; Zirconium | 2017 |
Loading frequencies up to 20Hz as an alternative to accelerate fatigue strength tests in a Y-TZP ceramic.
Topics: Dental Stress Analysis; Humans; Mastication; Materials Testing; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2016 |
Comparison of different low-temperature aging protocols: its effects on the mechanical behavior of Y-TZP ceramics.
Topics: Ceramics; Materials Testing; Reproducibility of Results; Surface Properties; Temperature; Yttrium; Zirconium | 2016 |
Effects of artificial aging conditions on yttria-stabilized zirconia implant abutments.
Topics: Dental Abutments; Dental Stress Analysis; Humans; In Vitro Techniques; Microscopy, Electron, Scanning; Surface Properties; Yttrium; Zirconium | 2016 |
Influence of Light Irradiation Through Zirconia on the Degree of Conversion of Composite Cements.
Topics: Aluminum Oxide; Ceramics; Cerium; Composite Resins; Curing Lights, Dental; Dental Materials; Dental Veneers; Humans; Light; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Microspectrophotometry; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyurethanes; Radiation Dosage; Resin Cements; Scattering, Radiation; Spectrum Analysis, Raman; Surface Properties; Yttrium; Zirconium | 2016 |
Mechanical behavior of a Y-TZP ceramic for monolithic restorations: effect of grinding and low-temperature aging.
Topics: Cold Temperature; Diamond; Materials Testing; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Surface Properties; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2016 |
Comparative radiopacity of conventional and full-contour Y-TZP ceramics.
Topics: Ceramics; Dental Prosthesis; Humans; Materials Testing; Yttrium; Zirconium | 2016 |
[Effect of Al₂O₃ sandblasting on the bond strength between 3mol% yttrium-stabilized tetragonal zirconium polycrystal zirconia framework and veneering porcelain].
Topics: Aluminum Oxide; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Materials Testing; Microscopy, Electron, Scanning; Shear Strength; Surface Properties; Yttrium; Zirconium | 2015 |
Enhanced photocatalytic activity of nanocomposites of TiO2 doped with Zr, Y or Ce polyoxometalates for degradation of methyl orange dye.
Topics: Azo Compounds; Cesium; Metal Nanoparticles; Metals; Nanocomposites; Titanium; Ultraviolet Rays; Wastewater; Water; Water Pollutants, Chemical; Yttrium; Zirconium | 2016 |
Evaluation of Temperature and Roughness Alteration of Diode Laser Irradiation of Zirconia and Titanium for Peri-Implantitis Treatment.
Topics: Acid Etching, Dental; Computer-Aided Design; Decontamination; Lasers, Semiconductor; Peri-Implantitis; Surface Properties; Temperature; Titanium; Yttrium; Zirconium | 2016 |
[Sintering behavior of tooth-like yttria-stabilized tetragonal zirconia polycrystal by adding rare-earth oxide].
Topics: Cross-Sectional Studies; Dental Porcelain; Dental Stress Analysis; Materials Testing; Metals, Rare Earth; Oxides; Yttrium; Zirconium | 2015 |
In Vitro Behavior of Osteoblasts on Zirconia After Different Intensities of Erbium, Chromium-Doped: Yttrium, Scandium, Gallium, and Garnet-Laser Irradiation.
Topics: Chromium; Dose-Response Relationship, Drug; Erbium; Gallium; Humans; In Vitro Techniques; Lasers, Solid-State; Low-Level Light Therapy; Microscopy, Electron, Scanning; Osteoblasts; Scandium; Surface Properties; Yttrium; Zirconium | 2016 |
Effect of surface modification of zirconia on cell adhesion, metabolic activity and proliferation of human osteoblasts.
Topics: Cell Adhesion; Dental Implants; Humans; Osseointegration; Osteoblasts; Surface Properties; Titanium; Yttrium; Zirconium | 2017 |
Inflammatory response to implantation of transparent nanocrystalline yttria-stabilized zirconia using a dorsal window chamber model.
Topics: Cell Adhesion; Humans; Materials Testing; Microscopy, Electron, Scanning; Nanoparticles; Prostheses and Implants; Skull; Surface Properties; Titanium; Yttrium; Zirconium | 2016 |
Exploring the optimal pre-sintering temperature on compressive strength and anti-fatigue property of graded zirconia-based glass/zirconia structure.
Topics: Compressive Strength; Glass; Materials Testing; Temperature; Yttrium; Zirconium | 2016 |
Flexible Yttrium-Stabilized Zirconia Nanofibers Offer Bioactive Cues for Osteogenic Differentiation of Human Mesenchymal Stromal Cells.
Topics: Cell Differentiation; Cues; Humans; Mesenchymal Stem Cells; Nanofibers; Osteogenesis; Tissue Engineering; Tissue Scaffolds; Yttrium; Zirconium | 2016 |
Effect of Connector Design on Fracture Resistance in Zirconia-based Fixed Partial Dentures for Upper Anterior Region.
Topics: Asian People; Computer-Aided Design; Dental Abutments; Dental Materials; Dental Restoration Failure; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Humans; Materials Testing; Microscopy, Electron, Scanning; Stress, Mechanical; Yttrium; Zirconium | 2016 |
Evaluation of laser bacterial anti-fouling of transparent nanocrystalline yttria-stabilized-zirconia cranial implant.
Topics: Biofilms; Escherichia coli; Lasers; Nanoparticles; Neurosurgical Procedures; Prostheses and Implants; Yttrium; Zirconium | 2016 |
Effect of liner and porcelain application on zirconia surface structure and composition.
Topics: Dental Porcelain; Dental Stress Analysis; Dental Veneers; Materials Testing; Microscopy, Electron, Scanning; Surface Properties; Yttrium; Zirconium | 2016 |
Effects of core-to-dentin thickness ratio on the biaxial flexural strength, reliability, and fracture mode of bilayered materials of zirconia core (Y-TZP) and veneer indirect composite resins.
Topics: Composite Resins; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Dentin; Humans; In Vitro Techniques; Tensile Strength; Yttrium; Zirconium | 2017 |
Effects of whitening dentifrice on yttria-stabilized tetragonal zirconia polycrystal surfaces after simulating brushing.
Topics: Dentifrices; In Vitro Techniques; Surface Properties; Toothbrushing; Yttrium; Zirconium | 2017 |
Translucency and low-temperature degradation of silica-doped zirconia: A pilot study.
Topics: Materials Testing; Pilot Projects; Silicon Dioxide; Surface Properties; Temperature; Yttrium; Zirconium | 2016 |
Sol-gel dip coating of yttria-stabilized tetragonal zirconia dental ceramic by aluminosilicate nanocomposite as a novel technique to improve the bonding of veneering porcelain.
Topics: Aluminum Silicates; Dental Bonding; Dental Materials; Dental Porcelain; Dental Veneers; Microscopy, Electron, Scanning; Nanocomposites; Spectrometry, X-Ray Emission; Spectroscopy, Fourier Transform Infrared; Tensile Strength; X-Ray Diffraction; Yttrium; Zirconium | 2016 |
Hydroxyapatite coating on PEEK implants: Biomechanical and histological study in a rabbit model.
Topics: Animals; Benzophenones; Bone Regeneration; Bone Substitutes; Bone-Implant Interface; Coated Materials, Biocompatible; Durapatite; Femur; Implants, Experimental; Ketones; Male; Materials Testing; Polyethylene Glycols; Polymers; Rabbits; Yttrium; Zirconium | 2016 |
Improving the compatibility of an Y-TZP/porcelain system using a new composite interlayer composition.
Topics: Ceramics; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Glass; Materials Testing; Reproducibility of Results; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2017 |
Effect of electrical discharge machining on dental Y-TZP ceramic-resin bonding.
Topics: Dental Bonding; Electrochemical Techniques; Graphite; Materials Testing; Powders; Resins, Synthetic; Shear Strength; Yttrium; Zirconium | 2017 |
Effect of accelerated aging on dental zirconia-based materials.
Topics: Dental Materials; Materials Testing; Pliability; Surface Properties; Yttrium; Zirconium | 2017 |
Enhanced cell adhesion on bioinert ceramics mediated by the osteogenic cell membrane enzyme alkaline phosphatase.
Topics: Alkaline Phosphatase; Aluminum Oxide; Cell Adhesion; Cell Line; Cell Membrane; Ceramics; Enzymes, Immobilized; Humans; Microscopy, Fluorescence; Surface Properties; Wettability; Yttrium; Zirconium | 2016 |
The evaluation of prepared microgroove pattern by femtosecond laser on alumina-zirconia nano-composite for endosseous dental implant application.
Topics: Aluminum Oxide; Dental Implantation, Endosseous; Dental Implants; Dental Materials; Materials Testing; Microscopy, Electron, Scanning; Nanocomposites; Spectrometry, X-Ray Emission; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2016 |
Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations.
Topics: Ceramics; Dental Materials; Dental Stress Analysis; Hardness; Materials Testing; X-Ray Diffraction; Yttrium; Zirconium | 2016 |
Surface micro-morphology, phase transformation, and mechanical reliability of ground and aged monolithic zirconia ceramic.
Topics: Ceramics; Materials Testing; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2017 |
Effect of cement space on stress distribution in Y-TZP based crowns.
Topics: Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Finite Element Analysis; Humans; Stress, Mechanical; Yttrium; Zirconium | 2017 |
Assessing the feasibility of yttria-stabilized zirconia in novel designs as mandibular anterior fixed lingual retention after orthodontic treatment.
Topics: Computer-Aided Design; Feasibility Studies; Humans; Orthodontic Appliance Design; Orthodontic Retainers; Stainless Steel; Yttrium; Zirconium | 2017 |
Zirconia changes after grinding and regeneration firing.
Topics: Ceramics; Computer-Aided Design; Crystallography; Dental Materials; Dental Porcelain; Dental Stress Analysis; Hot Temperature; Materials Testing; Microscopy, Electron, Scanning; Pliability; Pressure; Regeneration; Reproducibility of Results; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2017 |
The role of functional phosphoric acid ester monomers in the surface treatment of yttria-stabilized tetragonal zirconia polycrystals.
Topics: Dental Bonding; Dental Stress Analysis; Materials Testing; Organophosphates; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2017 |
Modulation of osteoblast behavior on nanopatterned yttria-stabilized zirconia surfaces.
Topics: Biocompatible Materials; Cell Line; Humans; Nanostructures; Osteoblasts; Yttrium; Zirconium | 2017 |
Influence of Core-Veneer Thickness Ratio on the Fracture Load and Failure Mode of Zirconia Crowns.
Topics: Ceramics; Crowns; Dental Materials; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Materials Testing; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2019 |
Translucent zirconia in the ceramic scenario for monolithic restorations: A flexural strength and translucency comparison test.
Topics: Aluminum Oxide; Ceramics; Dental Materials; Dental Porcelain; Dental Stress Analysis; Elastic Modulus; Humans; Materials Testing; Models, Theoretical; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2017 |
CAD/CAM machining Vs pre-sintering in-lab fabrication techniques of Y-TZP ceramic specimens: Effects on their mechanical fatigue behavior.
Topics: Ceramics; Computer-Aided Design; Materials Testing; Surface Properties; Yttrium; Zirconium | 2017 |
Effects of Silica Coating by Physical Vapor Deposition and Repeated Firing on the Low-Temperature Degradation and Flexural Strength of a Zirconia Ceramic.
Topics: Ceramics; Cold Temperature; Dental Materials; Dental Stress Analysis; Flexural Strength; Hot Temperature; Humans; Materials Testing; Pressure; Silicon Dioxide; Stress, Mechanical; Surface Properties; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2019 |
Effect of coarse grinding, overglazing, and 2 polishing systems on the flexural strength, surface roughness, and phase transformation of yttrium-stabilized tetragonal zirconia.
Topics: Ceramics; Dental Polishing; Dental Prosthesis; Humans; In Vitro Techniques; Surface Properties; Tensile Strength; Yttrium; Zirconium | 2017 |
Y-TZP zirconia regeneration firing: Microstructural and crystallographic changes after grinding.
Topics: Dental Porcelain; Materials Testing; Regeneration; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2017 |
Enhancing the Bioactivity of Yttria-Stabilized Tetragonal Zirconia Ceramics via Grain-Boundary Activation.
Topics: Ceramics; Materials Testing; Microscopy, Electron, Scanning; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2017 |
Effect of intra-oral aging on t→m phase transformation, microstructure, and mechanical properties of Y-TZP dental ceramics.
Topics: Cell Division; Ceramics; Dental Materials; Humans; Materials Testing; Pliability; Reproducibility of Results; Stress, Mechanical; Surface Properties; Time Factors; Yttrium; Zirconium | 2017 |
High Temperature Fabrication of Nanostructured Yttria-Stabilized-Zirconia (YSZ) Scaffolds by In Situ Carbon Templating Xerogels.
Topics: Adsorption; Carbon; Ceramics; Gels; Hot Temperature; Microscopy, Electron, Scanning; Nanostructures; Porosity; X-Ray Diffraction; Yttrium; Zirconium | 2017 |
[Evaluation of the effect of modified wet particle erosion on bond strength between 3Y-TZP zirconia framework and veneering porcelain].
Topics: Ceramics; Dental Bonding; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Materials Testing; Microscopy, Electron, Scanning; Shear Strength; Surface Properties; Yttrium; Zirconium | 2017 |
Fatigue limit of monolithic Y-TZP three-unit-fixed dental prostheses: Effect of grinding at the gingival zone of the connector.
Topics: Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Humans; Materials Testing; Resins, Synthetic; Surface Properties; Yttrium; Zirconium | 2017 |
Ageing kinetics and strength of airborne-particle abraded 3Y-TZP ceramics.
Topics: Aerosols; Ceramics; Kinetics; Materials Testing; Microscopy, Electron, Scanning; Surface Properties; Yttrium; Zirconium | 2017 |
Mechanical behavior of yttria-stabilized tetragonal zirconia polycrystalline ceramic after different zirconia surface treatments.
Topics: Ceramics; Materials Testing; Microscopy, Electron, Scanning; Silicon Dioxide; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2017 |
Effect of surface treatments on repair with composite resin of a partially monoclinic phase transformed yttrium-stabilized tetragonal zirconia.
Topics: Composite Resins; Dental Bonding; Dental Etching; Dental Prosthesis Repair; Dental Stress Analysis; Humans; In Vitro Techniques; Yttrium; Zirconium | 2018 |
Grain-Boundary Engineering for Aging and Slow-Crack-Growth Resistant Zirconia.
Topics: Ceramics; Dental Materials; Dental Restoration, Permanent; Hardness; Materials Testing; Microscopy, Electron, Scanning; Nanotechnology; Surface Properties; Time Factors; Yttrium; Zirconium | 2017 |
New High-Translucent Cubic-Phase-Containing Zirconia: Clinical and Laboratory Considerations and the Effect of Air Abrasion on Strength.
Topics: Air Abrasion, Dental; Ceramics; Color; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Humans; Materials Testing; Pilot Projects; Stress, Mechanical; Surface Properties; Tensile Strength; Yttrium; Zirconium | 2017 |
Microstructural analysis and reliability of monolithic zirconia after simulated adjustment protocols.
Topics: Dental Materials; Dental Polishing; Humans; Materials Testing; Microscopy, Electron, Scanning; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2017 |
Clinical evaluation of zirconia-based all-ceramic single crowns: an up to 12-year retrospective cohort study.
Topics: Adult; Crowns; Dental Prosthesis Design; Dental Restoration Failure; Female; Humans; Male; Middle Aged; Molar; Retrospective Studies; Risk Factors; Yttrium; Zirconium | 2018 |
Single-unit implant-supported restoration adjacent to multiple lithium disilicate restorations, an approach to an esthetic challenge: A clinical report.
Topics: Adult; Color; Dental Bonding; Dental Implants; Dental Porcelain; Dental Prosthesis, Implant-Supported; Dental Veneers; Esthetics, Dental; Humans; Male; Yttrium; Zirconium | 2018 |
Veneered zirconia inlay-retained fixed dental prostheses: 10-Year results from a prospective clinical study.
Topics: Acrylic Resins; Adult; Aged; Cementation; Ceramics; Composite Resins; Dental Cements; Dental Materials; Dental Porcelain; Dental Restoration Failure; Dental Veneers; Denture Design; Denture, Partial, Fixed; Female; Humans; Inlays; Male; Middle Aged; Molar; Polyurethanes; Prospective Studies; Regression Analysis; Resin Cements; Young Adult; Yttrium; Zirconium | 2017 |
On the bulk degradation of yttria-stabilized nanocrystalline zirconia dental implant abutments: an electron backscatter diffraction study.
Topics: Crystallization; Dental Abutments; Dental Implants; Dental Materials; Dental Porcelain; Dental Stress Analysis; Electrons; Humans; Materials Testing; Microscopy, Electron, Scanning; Nanoparticles; Powders; Scattering, Radiation; Stress, Mechanical; Surface Properties; Temperature; X-Ray Diffraction; Yttrium; Zirconium | 2017 |
Novel Cranial Implants of Yttria-Stabilized Zirconia as Acoustic Windows for Ultrasonic Brain Therapy.
Topics: Animals; Biocompatible Materials; Brain Diseases; Cattle; Finite Element Analysis; Male; Models, Biological; Porosity; Prostheses and Implants; Skull; Ultrasonic Therapy; Yttrium; Zirconium | 2017 |
Impact of machining on the flexural fatigue strength of glass and polycrystalline CAD/CAM ceramics.
Topics: Aluminum Silicates; Ceramics; Computer-Aided Design; Dental Porcelain; Dental Stress Analysis; Hardness; Materials Testing; Pliability; Surface Properties; Tensile Strength; Yttrium; Zirconium | 2017 |
Fatigue strength of yttria-stabilized zirconia polycrystals: Effects of grinding, polishing, glazing, and heat treatment.
Topics: Dental Polishing; Dental Porcelain; Diamond; Hot Temperature; Materials Testing; Surface Properties; Yttrium; Zirconium | 2017 |
Retrieved Magnesia-Stabilized Zirconia Femoral Heads Exhibit Minimal Roughening and Abrasive Potential.
Topics: Ceramics; Female; Femur Head; Follow-Up Studies; Hip Prosthesis; Humans; Magnesium Oxide; Male; Materials Testing; Middle Aged; Prosthesis Design; Prosthesis Failure; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2017 |
3D-printing zirconia implants; a dream or a reality? An in-vitro study evaluating the dimensional accuracy, surface topography and mechanical properties of printed zirconia implant and discs.
Topics: Dental Materials; Materials Testing; Microscopy, Electron, Scanning; Printing, Three-Dimensional; Surface Properties; Yttrium; Zirconium | 2017 |
Effect of 10-Methacryloxydecyl Dihydrogen Phosphate Concentration on Chemical Coupling of Methacrylate Resin to Yttria-stabilized Zirconia.
Topics: Dental Bonding; Materials Testing; Methacrylates; Resin Cements; Shear Strength; Spectroscopy, Fourier Transform Infrared; Surface Properties; Yttrium; Zirconium | 2017 |
Effects of small-grit grinding and glazing on mechanical behaviors and ageing resistance of a super-translucent dental zirconia.
Topics: Carbon Compounds, Inorganic; Compressive Strength; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Diamond; Hardness; Hot Temperature; Materials Testing; Mechanical Phenomena; Pliability; Silicon Compounds; Stress, Mechanical; Surface Properties; Time Factors; Yttrium; Zirconium | 2017 |
Low temperature degradation of single layers of multilayered zirconia in comparison to conventional unshaded zirconia: Phase transformation and flexural strength.
Topics: Acrylic Resins; Ceramics; Cold Temperature; Composite Resins; Dental Materials; Materials Testing; Polyurethanes; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2018 |
Dimensional changes from the sintering process and fit of Y-TZP copings: Micro-CT analysis.
Topics: Aluminum Oxide; Ceramics; Computer-Aided Design; Crowns; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Humans; Prosthesis Fitting; X-Ray Microtomography; Yttrium; Zirconium | 2017 |
Chemical affinity of 10-methacryloyloxydecyl dihydrogen phosphate to dental zirconia: Effects of molecular structure and solvents.
Topics: Materials Testing; Methacrylates; Molecular Structure; Photoelectron Spectroscopy; Shear Strength; Solvents; Spectroscopy, Fourier Transform Infrared; Surface Properties; Thermodynamics; Yttrium; Zirconium | 2017 |
Osseointegration of zirconia and titanium implants in a rabbit tibiae model evaluated by microtomography, histomorphometry and fluorochrome labeling analyses.
Topics: Animals; Bone Density; Bone Remodeling; Dental Implantation, Endosseous; Dental Implants; Dental Prosthesis Design; Fluorescent Dyes; Male; Models, Animal; Osseointegration; Osteogenesis; Rabbits; Surface Properties; Tibia; Titanium; X-Ray Microtomography; Yttrium; Zirconium | 2018 |
Fracture behavior, marginal gap width, and marginal quality of vented or pre-cemented CAD/CAM all-ceramic crowns luted on Y-TZP implants.
Topics: Ceramics; Computer-Aided Design; Crowns; Dental Cements; Dental Marginal Adaptation; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Yttrium; Zirconium | 2018 |
Effect of ceramic thickness, grinding, and aging on the mechanical behavior of a polycrystalline zirconia.
Topics: Analysis of Variance; Ceramics; Cold Temperature; Materials Testing; Microscopy, Electron, Scanning; Pliability; Random Allocation; Reproducibility of Results; Statistics, Nonparametric; Surface Properties; Tensile Strength; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2017 |
Analysis of Surface Roughness, Fracture Toughness, and Weibull Characteristics of Different Framework-Veneer Dental Ceramic Assemblies after Grinding, Polishing, and Glazing.
Topics: Analysis of Variance; Ceramics; Computer-Aided Design; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Pliability; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2019 |
Improvement in the Bonding of Y-TZP by Room-temperature Ultrasonic HF Etching.
Topics: Dental Bonding; Materials Testing; Microscopy, Electron, Scanning; Surface Properties; Temperature; Ultrasonics; Yttrium; Zirconium | 2017 |
[Preparation processes of 3% yttria-stabilized tetragonal zirconia polycrystalline ceramic composite powders coated with nano-sized Al₂O₃-boron nitride].
Topics: Aluminum Oxide; Boron Compounds; Ceramics; Materials Testing; Powders; Yttrium; Zirconium | 2017 |
Influence of Particle and Air-Abrasion Moment on Y-TZP Surface Characterization and Bond Strength.
Topics: Air Abrasion, Dental; Aluminum Oxide; Analysis of Variance; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Cements; Dental Materials; Dental Restoration Failure; Dental Stress Analysis; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Shear Strength; Silicon Dioxide; Surface Properties; Wettability; Yttrium; Zirconium | 2019 |
Mechanical behavior of yttria-stabilized tetragonal zirconia polycrystal: Effects of different aging regimens.
Topics: Ceramics; Dental Materials; Materials Testing; Microscopy, Electron, Scanning; Stress, Mechanical; Surface Properties; Time Factors; Yttrium; Zirconium | 2017 |
Influence of a surface conditioner to pre-sintered zirconia on the biaxial flexural strength and phase transformation.
Topics: Coated Materials, Biocompatible; Dental Materials; Flexural Strength; Materials Testing; Microscopy, Electron, Scanning; Phase Transition; Spectrometry, X-Ray Emission; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2018 |
Comparison of the mechanical properties of translucent zirconia and lithium disilicate.
Topics: Acid Etching, Dental; Dental Materials; Dental Porcelain; Dental Stress Analysis; Flexural Strength; In Vitro Techniques; Light; Materials Testing; Methacrylates; Organosilicon Compounds; Resin Cements; Surface Properties; Yttrium; Zirconium | 2018 |
The Effect of Sintering Time on the Marginal Fit of Zirconia Copings.
Topics: Analysis of Variance; Ceramics; Dental Marginal Adaptation; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Humans; Models, Dental; Teaching Materials; Time Factors; Yttrium; Zirconium | 2019 |
Graded Nano Glass-Zirconia Material for Dental Applications-Part II Biocompatibility Evaluation.
Topics: Dental Bonding; Dental Porcelain; Glass; Materials Testing; Microscopy, Electron, Scanning; Surface Properties; Yttrium; Zirconium | 2017 |
Tuning the structural and mechanical properties in ZrO
Topics: Materials Testing; Silicon Dioxide; Spectrum Analysis, Raman; X-Ray Diffraction; Yttrium; Zirconium | 2018 |
Silica coating followed by heat-treatment of MDP-primer for resin bond stability to yttria-stabilized zirconia polycrystals.
Topics: Coated Materials, Biocompatible; Composite Resins; Hot Temperature; Materials Testing; Shear Strength; Silicon Dioxide; Yttrium; Zirconium | 2019 |
Optimized anion exchange column isolation of zirconium-89 (
Topics: Anion Exchange Resins; Antibodies, Monoclonal; Automation; Chromatography, Ion Exchange; Computer Simulation; Cyclotrons; Fluorides; Hydrochloric Acid; Radioisotopes; Rheology; Solutions; Yttrium; Zirconium | 2018 |
Aging resistance, mechanical properties and translucency of different yttria-stabilized zirconia ceramics for monolithic dental crown applications.
Topics: Biomechanical Phenomena; Ceramics; Computer-Aided Design; Crowns; Dental Materials; Hardness; Materials Testing; Surface Properties; Yttrium; Zirconium | 2018 |
Investigation on the in vitro cytocompatibility of Mg-Zn-Y-Nd-Zr alloys as degradable orthopaedic implant materials.
Topics: 3T3 Cells; Absorbable Implants; Alloys; Animals; Cell Adhesion; Cell Differentiation; Fibroblasts; Magnesium; Metals; Mice; Neodymium; Osteoblasts; Yttrium; Zinc; Zirconium | 2018 |
Effect of Different Surface Treatments on Biaxial Flexural Strength of Yttria-stabilized Tetragonal Zirconia Polycrystal.
Topics: Air Abrasion, Dental; Computer-Aided Design; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Humans; Surface Properties; Tensile Strength; X-Ray Diffraction; Yttrium; Zirconium | 2018 |
Micropatterned Silica Films with Nanohydroxyapatite for Y-TZP Implants.
Topics: Cell Proliferation; Dental Materials; Flexural Strength; Materials Testing; Microscopy, Electron, Scanning; Nanostructures; Osteoblasts; Reproducibility of Results; Silicon Dioxide; Spectrometry, X-Ray Emission; Surface Properties; Yttrium; Zirconium | 2018 |
Incorporation of TiO
Topics: Ceramics; Dental Bonding; Dental Materials; Dental Stress Analysis; Microscopy, Confocal; Microscopy, Electron, Scanning; Nanotubes; Resin Cements; Surface Properties; Titanium; Yttrium; Zirconium | 2018 |
Fractographic analyses of failed one-piece zirconia implant restorations.
Topics: Crowns; Dental Implants; Dental Materials; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Stress Analysis; Materials Testing; Norway; Yttrium; Zirconium | 2018 |
Effect of grinding and aging on subcritical crack growth of a Y-TZP ceramic.
Topics: Analysis of Variance; Cold Temperature; Dental Stress Analysis; Hardness Tests; Materials Testing; Microscopy, Electron, Scanning; Pliability; Reference Values; Reproducibility of Results; Surface Properties; Tensile Strength; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2018 |
Can low-fusing glass application affect the marginal misfit and bond strength of Y-TZP crowns?
Topics: Analysis of Variance; Computer-Aided Design; Crowns; Dental Bonding; Dental Marginal Adaptation; Dental Restoration Failure; Epoxy Resins; Glass; Materials Testing; Microscopy, Electron, Scanning; Reference Values; Reproducibility of Results; Statistics, Nonparametric; Surface Properties; Tensile Strength; Yttrium; Zirconium | 2018 |
Promoting porcelain-zirconia bonding using different atmospheric pressure gas plasmas.
Topics: Argon; Atmospheric Pressure; Dental Bonding; Dental Porcelain; Fluorocarbons; Oxygen; Photoelectron Spectroscopy; Plasma Gases; Porosity; Shear Strength; Surface Properties; Wettability; Yttrium; Zirconium | 2018 |
Mechanical reliability, fatigue strength and survival analysis of new polycrystalline translucent zirconia ceramics for monolithic restorations.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Mechanical Phenomena; Stress, Mechanical; Yttrium; Zirconium | 2018 |
Biological and osseointegration capabilities of hierarchically (meso-/micro-/nano-scale) roughened zirconia.
Topics: Animals; Bone Morphogenetic Protein 2; Femur; Male; Nanostructures; Osseointegration; Osteoblasts; Osteocalcin; Osteopontin; Prostheses and Implants; Rats, Sprague-Dawley; Surface Properties; Yttrium; Zirconium | 2018 |
Evaluation of the bond strength and characteristics of zirconia after different surface treatments.
Topics: Acid Etching, Dental; Air Abrasion, Dental; Dental Bonding; Dental Materials; In Vitro Techniques; Materials Testing; Plasma Gases; Resin Cements; Surface Properties; Yttrium; Zirconium | 2018 |
[Effect of sandblasting on bending strength and subcritical crack growth of the dental zirconia ceramics].
Topics: Dental Materials; Dental Porcelain; Dental Stress Analysis; Elasticity; Materials Testing; Microscopy, Electron, Scanning; Surface Properties; Yttrium; Zirconium | 2017 |
[Effects of nano-zirconium hydroxide coating on resin bonding of 10-methacryloxy decyldihydrogen phosphate-conditioned zirconia].
Topics: Dental Bonding; Hydroxides; Materials Testing; Methacrylates; Phosphates; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2018 |
Mechanical reliability of dental grade zirconia after laser patterning.
Topics: Dental Materials; Lasers; Materials Testing; Mechanical Phenomena; Surface Properties; Yttrium; Zirconium | 2018 |
Effect of Aging Time and Thickness on Low-Temperature Degradation of Dental Zirconia.
Topics: Cold Temperature; Dental Materials; Dental Stress Analysis; Flexural Strength; Microscopy, Electron, Scanning; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2019 |
Comparative analyses of the IV group oxides additives influence on the sintering kinetics of zirconia nanopowders.
Topics: Ceramics; Diffusion; Hardness; Kinetics; Materials Testing; Microscopy, Electron, Scanning; Nanoparticles; Oxides; Silicon Dioxide; Surface Properties; Temperature; Tin Compounds; Yttrium; Zirconium | 2018 |
Tandem column isolation of zirconium-89 from cyclotron bombarded yttrium targets using an automated fluidic platform: Anion exchange to hydroxamate resin columns.
Topics: Anion Exchange Resins; Chemistry Techniques, Analytical; Cyclotrons; Hydroxamic Acids; Radioisotopes; Yttrium; Zirconium | 2018 |
Effect of sandblasting, silica coating, and erbium: Yttrium-Aluminum-Garnet laser treatment on the shear bond strength of self-adhesive resin cement to alumina ceramics.
Topics: Aluminum; Aluminum Oxide; Ceramics; Dental Bonding; Erbium; Humans; Lasers, Solid-State; Materials Testing; Resin Cements; Shear Strength; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2018 |
Mechanical performance of Y-TZP monolithic ceramic after grinding and aging: Survival estimates and fatigue strength.
Topics: Ceramics; Materials Testing; Stress, Mechanical; Surface Properties; Time Factors; Yttrium; Zirconium | 2018 |
Characterisation of a new plasma-enhanced film to improve shear bond strength between zirconia and veneering ceramic.
Topics: Ceramics; Dental Porcelain; Dental Veneers; Plasma Gases; Shear Strength; Surface Properties; Yttrium; Zirconium | 2018 |
Fatigue behavior and surface characterization of a Y-TZP after laboratory grinding and regeneration firing.
Topics: Ceramics; Dental Stress Analysis; Laboratories; Materials Testing; Mechanical Phenomena; Surface Properties; Yttrium; Zirconium | 2018 |
Does Luting Strategy Affect the Fatigue Behavior of Bonded Y-TZP Ceramic?
Topics: Aluminum Oxide; Dental Bonding; Dental Stress Analysis; Materials Testing; Resin Cements; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2018 |
Effect of MDP-Based Primers on the Luting Agent Bond to Y-TZP Ceramic and to Dentin.
Topics: Ceramics; Dental Cements; Dental Materials; Dentin; Humans; Materials Testing; Methacrylates; Molar; Yttrium; Zirconium | 2018 |
Effect of different times of nonthermal argon plasma treatment on the microtensile bond strength of self-adhesive resin cement to yttria-stabilized tetragonal zirconia polycrystal ceramic.
Topics: Argon; Ceramics; Dental Bonding; Dental Cements; Dental Stress Analysis; Materials Testing; Plasma Gases; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2019 |
Mechanisms induced by transition metal contaminants and their effect on the hydrothermal stability of zirconia-containing bioceramics: an XPS study.
Topics: Aluminum Oxide; Biocompatible Materials; Ceramics; Kinetics; Materials Testing; Phase Transition; Photoelectron Spectroscopy; Surface Properties; Temperature; Water; Yttrium; Zirconium | 2018 |
The performance of sol-gel silica coated Y-TZP for veneered and monolithic dental restorations.
Topics: Adhesiveness; Dental Veneers; Gels; Materials Testing; Shear Strength; Silicon Dioxide; Tensile Strength; Yttrium; Zirconium | 2019 |
Load-Bearing Capacity of Monolithic Zirconia Fixed Dental Prostheses Fabricated with Different Connector Designs and Embrasure Shaping Methods.
Topics: Dental Implant-Abutment Design; Dental Materials; Dental Prosthesis; Dental Prosthesis Design; Dental Stress Analysis; Humans; Weight-Bearing; Yttrium; Zirconium | 2019 |
Y-TZP surface behavior under two different milling systems and three different accelerated aging protocols.
Topics: Crowns; Dental Materials; Dental Stress Analysis; Materials Testing; Surface Properties; Time Factors; Yttrium; Zirconium | 2018 |
Optimal sandblasting conditions for conventional-type yttria-stabilized tetragonal zirconia polycrystals.
Topics: Dental Materials; Materials Testing; Surface Properties; Yttrium; Zirconium | 2019 |
Residual strain mapping through pair distribution function analysis of the porcelain veneer within a yttria partially stabilised zirconia dental prosthesis.
Topics: Dental Porcelain; Dental Stress Analysis; Dental Veneers; Materials Testing; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2019 |
Load-bearing capacity under fatigue and survival rates of adhesively cemented yttrium-stabilized zirconia polycrystal monolithic simplified restorations.
Topics: Adhesiveness; Dental Cements; Materials Testing; Surface Properties; Weight-Bearing; Yttrium; Zirconium | 2019 |
Initial osteoblast adhesion and subsequent differentiation on zirconia surfaces are regulated by integrins and heparin-sensitive molecule.
Topics: Actin Cytoskeleton; Animals; Cell Adhesion; Cell Differentiation; Cell Line; Cell Membrane; Cell Nucleus; Cell Proliferation; Cell Shape; Heparin; Integrins; Mice; Nanocomposites; Osteoblasts; Serum; Titanium; Wettability; Yttrium; Zirconium | 2018 |
Effect of airborne particle abrasion and sintering order on the surface roughness and shear bond strength between Y-TZP ceramic and resin cement.
Topics: Air Abrasion, Dental; Ceramics; Dental Bonding; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2019 |
Effects of laser treatments on surface roughness of zirconium oxide ceramics.
Topics: Dental Etching; Dental Materials; Humans; Lasers; Lasers, Gas; Lasers, Solid-State; Surface Properties; Yttrium; Zirconium | 2018 |
A thick frame decreases the fracture toughness of veneering ceramics used for zirconia-based all-ceramic restorations.
Topics: Ceramics; Dental Materials; Dental Restoration, Permanent; Dental Stress Analysis; Dental Veneers; Materials Testing; Microscopy, Electron, Scanning; Stress, Mechanical; X-Ray Diffraction; Yttrium; Zirconium | 2019 |
Phase Transformation and Roughening in Artificially Aged and Retrieved Zirconia-Toughened Alumina Femoral Heads.
Topics: Aluminum Oxide; Ceramics; Femur Head; Hip Prosthesis; Humans; Magnesium Oxide; Materials Testing; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2019 |
Synthesis of Ag-Ho, Ag-Sm, Ag-Zn, Ag-Cu, Ag-Cs, Ag-Zr, Ag-Er, Ag-Y and Ag-Co metal organic nanoparticles for UV-Vis-NIR wide-range bio-tissue imaging.
Topics: Animals; Cesium; Cobalt; Erbium; Holmium; Infrared Rays; Kidney; Nanoparticles; Optical Imaging; Particle Size; Samarium; Silver; Surface Properties; Swine; Ultraviolet Rays; Yttrium; Zinc; Zirconium | 2019 |
Influence of finishing/polishing on the fatigue strength, surface topography, and roughness of an yttrium-stabilized tetragonal zirconia polycrystals subjected to grinding.
Topics: Mechanical Phenomena; Surface Properties; Yttrium; Zirconium | 2019 |
New multi-layered zirconias: Composition, microstructure and translucency.
Topics: Ceramics; Dental Materials; Materials Testing; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2019 |
Influence of the yttrium content on the fracture strength of monolithic zirconia crowns after artificial aging.
Topics: Ceramics; Crowns; Dental Porcelain; Dental Stress Analysis; Flexural Strength; Materials Testing; Surface Properties; Yttrium; Zirconium | 2019 |
Cortical bone response toward nanosecond-pulsed laser-treated zirconia implant surfaces.
Topics: Aluminum Oxide; Animals; Cortical Bone; Rats; Surface Properties; Yttrium; Zirconium | 2019 |
Chemical Bonding to Novel Translucent Zirconias: A Mechanical and Molecular Investigation.
Topics: Dental Bonding; Materials Testing; Shear Strength; Surface Properties; Yttrium; Zirconium | 2019 |
Physicochemical Properties and Microshear Bond Strength of Experimental Self-adhesive Resin Cements to Dentin or Yttria-stabilized Tetragonal Zirconia Polycrystal.
Topics: Dental Bonding; Dental Stress Analysis; Dentin; Materials Testing; Resin Cements; Surface Properties; Yttrium; Zirconium | 2019 |
Impact of high-speed sintering on translucency, phase content, grain sizes, and flexural strength of 3Y-TZP and 4Y-TZP zirconia materials.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Surface Properties; Yttrium; Zirconium | 2019 |
A new approach for Y-TZP surface treatment: evaluations of roughness and bond strength to resin cemen.
Topics: Air Abrasion, Dental; Analysis of Variance; Dental Bonding; Materials Testing; Reference Values; Reproducibility of Results; Resin Cements; Shear Strength; Statistics, Nonparametric; Surface Properties; Yttrium; Zirconium | 2019 |
Fatigue resistance of yttria-stabilized tetragonal zirconia polycrystal clasps for removable partial dentures.
Topics: Chromium Alloys; Computer-Aided Design; Dental Stress Analysis; Denture, Partial, Removable; Materials Testing; Yttrium; Zirconium | 2019 |
Improvement of mechanical properties of Y-TZP by thermal annealing with monoclinic zirconia nanoparticle coating.
Topics: Dental Materials; Materials Testing; Nanoparticles; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2019 |
Y-TZP/porcelain graded dental restorations design for improved damping behavior - A study on damping capacity and dynamic Young's modulus.
Topics: Adhesiveness; Dental Porcelain; Elastic Modulus; Hardness; Materials Testing; Temperature; Yttrium; Zirconium | 2019 |
Evaluation of the biological behaviour of various dental implant abutment materials on attachment and viability of human gingival fibroblasts.
Topics: Ceramics; Dental Implants; Dental Materials; Fibroblasts; Humans; Materials Testing; Microscopy, Electron, Scanning; Surface Properties; Titanium; Yttrium; Zirconium | 2019 |
Surface characterization of commercially available yttria-stabilized tetragonal zirconia polycrystalline in water and Hanks' solution using X-ray photoelectron spectroscopy.
Topics: Materials Testing; Photoelectron Spectroscopy; Surface Properties; Water; Yttrium; Zirconium | 2019 |
Why a zero CTE mismatch may be better for veneered Y-TZP structures.
Topics: Dental Veneers; Finite Element Analysis; Materials Testing; Mechanical Phenomena; Stress, Mechanical; Temperature; Yttrium; Zirconium | 2019 |
Characterization of ageing resistant transparent nanocrystalline yttria-stabilized zirconia implants.
Topics: Ceramics; Crystallization; Hardness; Hot Temperature; Humans; Materials Testing; Nanoparticles; Phase Transition; Pressure; Prostheses and Implants; Skull; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2020 |
Air-abrasion using new silica-alumina powders containing different silica concentrations: Effect on the microstructural characteristics and fatigue behavior of a Y-TZP ceramic.
Topics: Air; Aluminum Oxide; Ceramics; Mechanical Phenomena; Powders; Silicon Dioxide; Yttrium; Zirconium | 2019 |
Optical Access to Arteriovenous Cerebral Microcirculation Through a Transparent Cranial Implant.
Topics: Animals; Blood Flow Velocity; Brain; Ceramics; Male; Mice; Microcirculation; Microvessels; Optical Imaging; Prostheses and Implants; Prosthesis Implantation; Skull; Spectroscopy, Near-Infrared; Yttrium; Zirconium | 2019 |
Effect of Combined Surface Treatments on Surface Roughness and Resin Bond Strength to Y-TZP Ceramic and Nickel-Chromium Metal Alloy.
Topics: Chromium Alloys; Dental Alloys; Dental Bonding; Dental Etching; Dental Porcelain; Lasers, Solid-State; Materials Testing; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2019 |
Synthesis, characterization, and cytocompatibility of yttria stabilized zirconia nanopowders for creating a window to the brain.
Topics: Aerosols; Animals; Bone Marrow Cells; Brain; Cell Adhesion; Female; Hydrogen-Ion Concentration; In Vitro Techniques; Materials Testing; Mesenchymal Stem Cells; Metal Nanoparticles; Nanoparticles; Nanostructures; Nanotechnology; Powders; Prostheses and Implants; Pyrolysis; Rats; Rats, Sprague-Dawley; Spectrum Analysis, Raman; Stress, Mechanical; Yttrium; Zirconium | 2020 |
Low-fusing porcelain glaze application does not damage the fatigue strength of Y-TZP.
Topics: Ceramics; Dental Porcelain; Equipment Failure; Materials Testing; Microscopy, Electron, Scanning; Powders; Pressure; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2019 |
Ultrashort-pulse laser as a surface treatment for bonding between zirconia and resin cement.
Topics: Dental Bonding; Materials Testing; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2019 |
Effect of ionizing radiation on mechanical properties and translucency of monolithic zirconia.
Topics: Ceramics; Dental Materials; Flexural Strength; Humans; Kaplan-Meier Estimate; Materials Testing; Microscopy, Electron, Scanning; Pressure; Radiation, Ionizing; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2020 |
Investigations into the interface failure of yttria partially stabilised zirconia - porcelain dental prostheses through microscale residual stress and phase quantification.
Topics: Dental Porcelain; Dental Prosthesis; Dental Stress Analysis; Dental Veneers; Materials Testing; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2019 |
Apoptotic and DNA-damaging effects of yttria-stabilized zirconia nanoparticles on human skin epithelial cells.
Topics: Acetylcysteine; Apoptosis; Cell Line; Cell Shape; Cell Survival; DNA Breaks, Double-Stranded; DNA Damage; DNA Fragmentation; Epithelial Cells; Glutathione; Humans; Intracellular Membranes; Lysosomes; Membrane Potential, Mitochondrial; Metal Nanoparticles; Oxidative Stress; Reactive Oxygen Species; Skin; Yttrium; Zirconium | 2019 |
Effect of extrinsic pigmentation and surface treatments on biaxial flexure strength after cyclic loading of a translucent ZrO
Topics: Ceramics; Flexural Strength; Materials Testing; Pigmentation; Reproducibility of Results; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2019 |
Effect of microslit retention on the bond strength of zirconia to dental materials.
Topics: Ceramics; Dental Bonding; Dental Materials; Dental Porcelain; Dental Veneers; Materials Testing; Shear Strength; Surface Properties; Yttrium; Zirconium | 2019 |
Effect of cleaning protocol on silica deposition and silica-mediated bonding to Y-TZP.
Topics: Dental Bonding; Materials Testing; Resin Cements; Shear Strength; Silanes; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2019 |
Degradation kinetics of high-translucency dental zirconias: Mechanical properties and in-depth analysis of phase transformation.
Topics: Ceramics; Dental Materials; Dental Stress Analysis; Kinetics; Materials Testing; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2020 |
Effects of different silica-based layer coatings on bond strength of Y-TZP to bovine dentin.
Topics: Animals; Cattle; Dental Bonding; Dentin; Materials Testing; Resin Cements; Shear Strength; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2020 |
Silicon-based film on the yttria-stabilized tetragonal zirconia polycrystal: Surface and shear bond strength analysis.
Topics: Dental Bonding; Dental Stress Analysis; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Silicon; Surface Properties; Yttrium; Zirconium | 2019 |
Evaluation of shear bond strength of zirconia-based monolithic CAD-CAM materials to resin cement after different surface treatments.
Topics: Ceramics; Composite Resins; Computer-Aided Design; Dental Bonding; Humans; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2019 |
High-translucent yttria-stabilized zirconia ceramics are wear-resistant and antagonist-friendly.
Topics: Ceramics; Dental Porcelain; Materials Testing; Surface Properties; Yttrium; Zirconium | 2019 |
Evaluation of reproducibility of the chemical solubility of dental ceramics using ISO 6872:2015.
Topics: Ceramics; Dental Porcelain; Dental Stress Analysis; Gas Chromatography-Mass Spectrometry; Materials Testing; Reproducibility of Results; Solubility; Surface Properties; Yttrium; Zirconium | 2020 |
Mechanical properties of aged yttria-stabilized tetragonal zirconia polycrystal after abrasion with different aluminum oxide particles.
Topics: Aluminum Oxide; Ceramics; Dental Materials; Dental Stress Analysis; Materials Testing; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2020 |
The adverse effects of tungsten carbide grinding on the strength of dental zirconia.
Topics: Ceramics; Dental Materials; Dental Polishing; Materials Testing; Microscopy, Electron, Scanning; Surface Properties; Tungsten Compounds; Yttrium; Zirconium | 2020 |
Finite element analysis of a one-piece zirconia implant in anterior single tooth implant applications.
Topics: Biomechanical Phenomena; Computer Simulation; Dental Implants, Single-Tooth; Dental Stress Analysis; Finite Element Analysis; Humans; Incisor; Materials Testing; Maxilla; Stress, Mechanical; Yttrium; Zirconium | 2020 |
Aging resistance of an experimental zirconia-toughened alumina composite for large span dental prostheses: Optical and mechanical characterization.
Topics: Aluminum Oxide; Ceramics; Dental Materials; Dental Prosthesis; Materials Testing; Surface Properties; Yttrium; Zirconium | 2020 |
Topics: Calibration; Dental Materials; Flexural Strength; Humans; Materials Testing; Surface Properties; Thermoluminescent Dosimetry; Yttrium; Zirconium | 2021 |
The synergistic effects of SrF
Topics: Anti-Bacterial Agents; Fluorides; Ions; Polylysine; Root Canal Filling Materials; Strontium; Yttrium; Zirconium | 2020 |
Dimensional Changes of Yttria-stabilized Zirconia under Different Preparation Designs and Sintering Protocols.
Topics: Computer-Aided Design; Crowns; Dental Prosthesis Design; Yttrium; Zirconium | 2020 |
Stable Resin Bonding to Y-TZP Ceramic with Air Abrasion by Alumina Particles Containing 7% Silica.
Topics: Air Abrasion, Dental; Aluminum Oxide; Ceramics; Dental Bonding; Resin Cements; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2020 |
Effect of Powder Characteristics on Slip Casting Fabrication of Dental Zirconia Implants.
Topics: Hardness; Materials Testing; Powders; Yttrium; Zirconium | 2020 |
Fabrication of an All-Ceramic Implant by Slip Casting of Nanoscale Zirconia Powder.
Topics: Ceramics; Materials Testing; Powders; Surface Properties; Yttrium; Zirconium | 2020 |
Silica infiltration in partially stabilized zirconia: Effect of hydrothermal aging on mechanical properties.
Topics: Ceramics; Dental Materials; Materials Testing; Silicon Dioxide; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2020 |
Grinding the intaglio surface of yttria partially- and fully-stabilized zirconia polycrystals restorations: Effect on their fatigue behavior.
Topics: Ceramics; Dental Stress Analysis; Materials Testing; Surface Properties; Yttrium; Zirconium | 2020 |
Elemental analysis of commercial zirconia dental implants - Is "metal-free" devoid of metals?
Topics: Ceramics; Dental Implants; Dental Materials; Materials Testing; Uranium; Yttrium; Zirconium | 2020 |
Effect of different grinding protocols on surface characteristics and fatigue behavior of yttria-stabilized zirconia polycrystalline: An in vitro study.
Topics: Ceramics; Materials Testing; Microscopy, Electron, Scanning; Surface Properties; Yttrium; Zirconium | 2020 |
Exploring the use of pulsed erbium lasers to retrieve a zirconia crown from a zirconia implant abutment.
Topics: Chromium; Crowns; Dental Bonding; Dental Prosthesis; Erbium; Gallium; Humans; Lasers, Solid-State; Microscopy, Electron, Scanning; Resin Cements; Tooth Crown; Yttrium; Zirconium | 2020 |
Low-temperature degradation increases the cyclic fatigue resistance of 3Y-TZP in bending.
Topics: Ceramics; Equipment Failure; Materials Testing; Surface Properties; Temperature; Yttrium; Zirconium | 2020 |
Effect of hydrothermal aging on the properties of zirconia with different levels of translucency.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Surface Properties; Yttrium; Zirconium | 2020 |
Aging resistant ZTA composite for dental applications: Microstructural, optical and mechanical characterization.
Topics: Aluminum Oxide; Ceramics; Dental Materials; Materials Testing; Surface Properties; Yttrium; Zirconium | 2020 |
Fracture toughness of zirconia with a nanometer size notch fabricated using focused ion beam milling.
Topics: Crowns; Dental Materials; Denture, Partial, Fixed; Hardness Tests; Materials Testing; Particle Size; Stress, Mechanical; Yttrium; Zirconium | 2020 |
Adhesion of streptococci to titanium and zirconia.
Topics: Bacterial Adhesion; Materials Testing; Microscopy, Electron, Scanning; Photoelectron Spectroscopy; Streptococcus sanguis; Surface Properties; Titanium; Yttrium; Zirconium | 2020 |
Effects of Tribochemical Silica Coating and Alumina-Particle Air Abrasion on 3Y-TZP and 5Y-TZP: Evaluation of Surface Hardness, Roughness, Bonding, and Phase Transformation.
Topics: Air Abrasion, Dental; Aluminum Oxide; Dental Bonding; Hardness; Materials Testing; Resin Cements; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2020 |
The Effects of Syndecan on Osteoblastic Cell Adhesion Onto Nano-Zirconia Surface.
Topics: Actin Cytoskeleton; Animals; Cell Adhesion; Cell Membrane; Cell Proliferation; Cells, Cultured; Mice; Microscopy, Electron, Scanning; Osseointegration; Osteoblasts; Surface Properties; Syndecan-2; Syndecans; Titanium; Yttrium; Zirconium | 2020 |
Mechanical and microstructural properties of ultra-translucent dental zirconia ceramic stabilized with 5 mol% yttria.
Topics: Ceramics; Cross-Sectional Studies; Dental Materials; Materials Testing; Reproducibility of Results; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2020 |
Hydrothermal degradation methods affect the properties and phase transformation depth of translucent zirconia.
Topics: Ceramics; Dental Materials; Materials Testing; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2020 |
Fatigue behavior and damage modes of high performance poly-ether-ketone-ketone PEKK bilayered crowns.
Topics: Computer-Aided Design; Crowns; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Ether; Ketones; Materials Testing; Yttrium; Zirconium | 2020 |
Wear behavior and microstructural characterization of translucent multilayer zirconia.
Topics: Ceramics; Dental Porcelain; Humans; Materials Testing; Surface Properties; Yttrium; Zirconium | 2020 |
Effect of glazing application side and mechanical cycling on the biaxial flexural strength and Weibull characteristics of a Y-TZP ceramic.
Topics: Ceramics; Dental Porcelain; Flexural Strength; Materials Testing; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2020 |
Fatigue behavior and colorimetric differences of a porcelain-veneered zirconia: effect of quantity and position of specimens during firing.
Topics: Ceramics; Colorimetry; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Materials Testing; Surface Properties; Yttrium; Zirconium | 2021 |
Biaxial flexural strength, crystalline structure, and grain size of new commercially available zirconia-based ceramics for dental appliances produced using a new slip-casting method.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Surface Properties; Yttrium; Zirconium | 2021 |
In vivo ageing of zirconia dental ceramics - Part II: Highly-translucent and rapid-sintered 3Y-TZP.
Topics: Ceramics; Dental Materials; Humans; Materials Testing; Surface Properties; Yttrium; Zirconium | 2021 |
Effect of cementation delay on bonding of self-adhesive resin cement to yttria-stabilized tetragonal zirconia polycrystal ceramic treated with nonthermal argon plasma.
Topics: Argon; Cementation; Ceramics; Dental Bonding; Dental Cements; Dental Stress Analysis; Materials Testing; Plasma Gases; Resin Cements; Surface Properties; Yttrium; Zirconium | 2021 |
Characterization of the 3YSZ/CNT/HAP coating on the Ti6Al4V alloy by electrophoretic deposition.
Topics: Alloys; Cell Adhesion; Cell Survival; Coated Materials, Biocompatible; Corrosion; Dielectric Spectroscopy; Durapatite; Elastic Modulus; Electrophoresis; Hardness; Humans; Materials Testing; Mesenchymal Stem Cells; Nanotubes, Carbon; Structure-Activity Relationship; Surface Properties; Titanium; Yttrium; Zirconium | 2021 |
Determination of Hardness and Fracture Toughness of Y-TZP Manufactured by Digital Light Processing through the Indentation Technique.
Topics: Dental Materials; Hardness; Materials Testing; Microscopy, Electron, Scanning; Surface Properties; Yttrium; Zirconium | 2021 |
Influence of surface treatments and cyclic fatigue on subsurface defects and mechanical properties of zirconia frameworks.
Topics: Ceramics; Dental Materials; Dental Stress Analysis; Materials Testing; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2021 |
Fatigue properties of hollow zirconia implants.
Topics: Dental Stress Analysis; Materials Testing; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2021 |
Sintered Characteristics of 3 Mole% Yttria-Stabilized Zirconia Polycrystals (3Y-TZP) Implants Manufactured by Slip-Casting and Computer Aided Design/Computer Aided Manufacturing (CAD/CAM).
Topics: Ceramics; Computer-Aided Design; Materials Testing; Surface Properties; Yttrium; Zirconium | 2021 |
Topics: Acrylic Resins; Color; Composite Resins; Computer-Aided Design; Dental Materials; Materials Testing; Microwaves; Polymethyl Methacrylate; Prosthodontics; Surface Properties; Technology; Yttrium; Zirconium | 2022 |
Ultrasensitive biosensing platform based on yttria doped zirconia-reduced graphene oxide nanocomposite for detection of salivary oral cancer biomarker.
Topics: Biomarkers, Tumor; Biosensing Techniques; Graphite; Humans; Limit of Detection; Mouth Neoplasms; Nanocomposites; Saliva; Yttrium; Zirconium | 2021 |
Fluorescence and physical properties of thulium and erbium co-doped dental zirconia.
Topics: Ceramics; Dental Materials; Erbium; Esthetics, Dental; Materials Testing; Surface Properties; Thulium; Yttrium; Zirconium | 2021 |
Impact of varying step-stress protocols on the fatigue behavior of 3Y-TZP, 4Y-TZP and 5Y-TZP ceramic.
Topics: Ceramics; Dental Stress Analysis; Flexural Strength; Materials Testing; Surface Properties; Yttrium; Zirconium | 2021 |
Intraoral low-temperature degradation of monolithic zirconia dental prostheses: Results of a prospective clinical study with ex vivo monitoring.
Topics: Ceramics; Dental Materials; Dental Prosthesis; Materials Testing; Prospective Studies; Surface Properties; Temperature; Yttrium; Zirconium | 2021 |
The effects of using erbium, chromium-doped:yttrium-scandium-gallium-garnet laser on the surface modification, bacterial decontamination, and cell adhesion on zirconia discs: an in vitro study.
Topics: Cell Adhesion; Chromium; Decontamination; Erbium; Escherichia coli; Gallium; Lasers, Solid-State; Scandium; Yttrium; Zirconium | 2021 |
Surface treatments and its effects on the fatigue behavior of a 5% mol yttria partially stabilized zirconia material.
Topics: Aluminum Oxide; Ceramics; Dental Stress Analysis; Materials Testing; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2021 |
Impact of changes in sintering temperatures on characteristics of 4YSZ and 5YSZ.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Surface Properties; Temperature; Yttrium; Zirconium | 2021 |
Biaxial flexural strength and phase transformation characteristics of dental monolithic zirconia ceramics with different sintering durations: An in vitro study.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Surface Properties; Yttrium; Zirconium | 2022 |
Effectiveness of Nanohydroxyapatite on Demineralization of Enamel and Cementum Surrounding Margin of Yttria-Stabilized Zirconia Polycrystalline Ceramic Restoration.
Topics: Dental Cementum; Dental Enamel; Dental Restoration, Permanent; Durapatite; Humans; Microscopy, Electron, Scanning; Nanostructures; Tooth Demineralization; Yttrium; Zirconium | 2021 |
Use of Bead Mixtures as a Novel Process Optimization Approach to Nanomilling of Drug Suspensions.
Topics: Cross-Linking Reagents; Drug Compounding; Feasibility Studies; Fenofibrate; Nanoparticles; Particle Size; Polystyrenes; Suspensions; Time Factors; Yttrium; Zirconium | 2021 |
Influence of sintering conditions on translucency, biaxial flexural strength, microstructure, and low-temperature degradation of highly translucent dental zirconia.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Surface Properties; Temperature; Yttrium; Zirconium | 2021 |
Laser surface treatment on Yttria-stabilized zirconia dental implants: Influence on cell behavior.
Topics: Dental Implants; Humans; Osteoblasts; Surface Properties; Titanium; Yttrium; Zirconium | 2022 |
Pre-cementation procedures' effect on dental zirconias with different yttria content.
Topics: Cementation; Ceramics; Dental Bonding; Dental Etching; Dental Stress Analysis; Materials Testing; Resin Cements; Surface Properties; Yttrium; Zirconium | 2021 |
Nanoscale physico-mechanical properties of an aging resistant ZTA composite.
Topics: Aluminum Oxide; Ceramics; Dental Materials; Materials Testing; Surface Properties; Yttrium; Zirconium | 2021 |
[Effects of femtosecond laser treatment on surface characteristics and flexural strength of zirconia].
Topics: Ceramics; Dental Materials; Flexural Strength; Humans; Lasers; Materials Testing; Microscopy, Electron, Scanning; Surface Properties; Yttrium; Zirconium | 2021 |
Mechanical performance of a hybrid zirconia developed through hydrothermal treatment and Room-Temperature Atomic Layer Deposition (RT-ALD).
Topics: Ceramics; Dental Materials; Dental Stress Analysis; Materials Testing; Surface Properties; Temperature; Yttrium; Zirconium | 2021 |
Effect of sintering condition and low-temperature degradation on the flexural strength and phase transformation of zirconia.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Surface Properties; Temperature; Yttrium; Zirconium | 2021 |
Influence of crystalline phase transformation induced by airborne-particle abrasion and low-temperature degradation on mechanical properties of dental zirconia ceramics stabilized with over 5 mol% yttria.
Topics: Ceramics; Temperature; Yttrium; Zirconium | 2022 |
Surface characterization of different surface treatments associations with plasma and bonding analysis of Y-TZP and the veneering ceramic.
Topics: Ceramics; Dental Bonding; Materials Testing; Microscopy, Electron, Scanning; Shear Strength; Surface Properties; Yttrium; Zirconium | 2021 |
Effect of dynamic loading on fracture resistance of gradient zirconia fixed partial denture frameworks.
Topics: Dental Materials; Dental Stress Analysis; Denture, Partial, Fixed; Materials Testing; Surface Properties; Yttrium; Zirconium | 2023 |
Effect of different zirconia surface pretreatments on the flexural strength of veneered Y-TZP ceramic before and after in vitro aging.
Topics: Aluminum Oxide; Ceramics; Dental Materials; Flexural Strength; Materials Testing; Silanes; Surface Properties; Yttrium; Zirconium | 2022 |
Surface and bulk properties of zirconia as a function of composition and aging.
Topics: Ceramics; Dental Materials; Materials Testing; Surface Properties; Yttrium; Zirconium | 2022 |
Flexural strength of 3Y-TZP bioceramics obtained by direct write assembly as function of residual connected-porosity.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Porosity; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2022 |
Influence of high-speed sintering protocols on translucency, mechanical properties, microstructure, crystallography, and low-temperature degradation of highly translucent zirconia.
Topics: Ceramics; Crystallography; Dental Materials; Materials Testing; Surface Properties; Temperature; Yttrium; Zirconium | 2022 |
Effects of Hydrothermal Treatment on the Phase Transformation, Surface Roughness, and Mechanical Properties of Monolithic Translucent Zirconia.
Topics: Ceramics; Dental Materials; Materials Testing; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2022 |
Selective Coimmobilization of His-Tagged Enzymes on Yttrium-Stabilized Zirconia-Based Membranes for Continuous Asymmetric Bioreductions.
Topics: 3-Hydroxyacyl CoA Dehydrogenases; Biocompatible Materials; Enzymes, Immobilized; Formate Dehydrogenases; Materials Testing; Yttrium; Zirconium | 2022 |
Evaluation of mechanical properties of dental zirconia in different milling conditions and sintering temperatures.
Topics: Ceramics; Dental Materials; Materials Testing; Microscopy, Electron, Scanning; Surface Properties; Temperature; Yttrium; Zirconium | 2023 |
Effect of Grinding and Regenerative Heat Treatment on the Fracture Resistance of a Zirconia/Porcelain Veneer Interface.
Topics: Ceramics; Dental Porcelain; Hot Temperature; Materials Testing; Microscopy, Electron, Scanning; Surface Properties; Yttrium; Zirconium | 2022 |
Evaluation of Er,Cr:YSGG laser irradiation for debonding of zirconia hybrid abutment crowns from titanium bases.
Topics: Lasers, Solid-State; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Surface Properties; Titanium; Yttrium; Zirconium | 2022 |
Silica deposition on zirconia via room-temperature atomic layer deposition (RT-ALD): Effect on bond strength to veneering ceramic.
Topics: Aluminum Oxide; Ceramics; Dental Bonding; Materials Testing; Shear Strength; Silicon Dioxide; Surface Properties; Temperature; Yttrium; Zirconium | 2022 |
Effect of milled and lithography-based additively manufactured zirconia (3Y-TZP) on the biological properties of human osteoblasts.
Topics: Ceramics; Dental Materials; Humans; Materials Testing; Osteoblasts; Surface Properties; Yttrium; Zirconium | 2023 |
Fracture behavior of cantilever fixed dental prostheses fabricated from different zirconia generations.
Topics: Ceramics; Dental Materials; Dental Prosthesis; Dental Stress Analysis; Humans; Materials Testing; Surface Properties; Yttrium; Zirconium | 2022 |
Experimental analysis and numerical simulations of the mechanical properties of a (Ce,Y)-TZP/Al
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Surface Properties; Yttrium; Zirconium | 2022 |
Survivability and fracture resistance of monolithic and multi-yttria-layered zirconia crowns as a function of yttria content: A mastication simulation study.
Topics: Crowns; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Mastication; Materials Testing; Yttrium; Zirconium | 2022 |
Mechanical properties-translucency-microstructure relationships in commercial monolayer and multilayer monolithic zirconia ceramics.
Topics: Ceramics; Dental Materials; Materials Testing; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2022 |
Effect of hydrothermal and mechanical aging on the fatigue performance of high-translucency zirconias.
Topics: Ceramics; Dental Materials; Materials Testing; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2022 |
Sintering mode of a translucent Y-TZP: Effects on its biaxial flexure fatigue strength, surface morphology and translucency.
Topics: Ceramics; Dental Materials; Materials Testing; Surface Properties; Yttrium; Zirconium | 2022 |
Experimental and computational model approach to assess the photothermal effects in transparent nanocrystalline yttria stabilized zirconia cranial implant.
Topics: Computer Simulation; Yttrium; Zirconium | 2022 |
Nanocrystalline Yttria-Stabilized Zirconia Ceramics for Cranial Window Applications.
Topics: Ceramics; Yttrium; Zirconium | 2022 |
Effect of air abrasion, acid etching, and aging on the shear bond strength with resin cement to 3Y-TZP zirconia.
Topics: Ceramics; Dental Bonding; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2022 |
Strength and reliability of zirconia fabricated by additive manufacturing technology.
Topics: Ceramics; Dental Materials; Diamond; Materials Testing; Reproducibility of Results; Surface Properties; Technology; Yttrium; Zirconium | 2022 |
Masking ability of implant abutment substrates by using different ceramic restorative systems.
Topics: Benzophenones; Ceramics; Color; Crowns; Dental Cements; Dental Implants; Dental Materials; Dental Porcelain; Materials Testing; Polymers; Surface Properties; Titanium; Yttrium; Zirconium | 2022 |
Effect of Speed Sintering on Low Temperature Degradation and Biaxial Flexural Strength of 5Y-TZP Zirconia.
Topics: Ceramics; Flexural Strength; Materials Testing; Surface Properties; Temperature; Yttrium; Zirconium | 2022 |
Stability of fatigued and aged ZTA compared to 3Y-TZP and Al
Topics: Aged; Aluminum Oxide; Ceramics; Dental Materials; Humans; Materials Testing; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2022 |
Effect of thermocycling on the mechanical properties, inorganic particle release and low temperature degradation of glazed high translucent monolithic 3Y-TZP dental restorations.
Topics: Ceramics; Cold Temperature; Dental Materials; Flexural Strength; Materials Testing; Surface Properties; Temperature; Yttrium; Zirconium | 2022 |
Two-body wear resistance and fatigue survival of new Y-TZP and ATZ ceramics made with a new slip-casting method.
Topics: Ceramics; Dental Porcelain; Materials Testing; Surface Properties; Yttrium; Zirconium | 2022 |
Aging resistance of highly translucent zirconia ceramics with rapid sintering.
Topics: Ceramics; Dental Materials; Materials Testing; Surface Properties; Yttrium; Zirconium | 2023 |
Effect of different surface treatments on the biaxial flexural strength of zirconia ceramics.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Surface Properties; Yttrium; Zirconium | 2023 |
Fatigue performance analysis of strength-graded zirconia polycrystals for monolithic three-unit implant-supported prostheses.
Topics: Ceramics; Dental Porcelain; Dental Stress Analysis; Materials Testing; Prostheses and Implants; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2023 |
Speed-sintering and the mechanical properties of 3-5 mol% Y
Topics: Ceramics; Dental Materials; Materials Testing; Surface Properties; Yttrium; Zirconium | 2023 |
Microstructure, composition, and flexural strength of different layers within zirconia materials with strength gradient.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Surface Properties; Yttrium; Zirconium | 2023 |
Layer characteristics in strength-gradient multilayered yttria-stabilized zirconia.
Topics: Ceramics; Dental Materials; Materials Testing; Surface Properties; Yttrium; Zirconium | 2023 |
Flexural strength of high yttrium oxide-doped monochrome and multilayered fully stabilized zirconia upon various sintered cooling rates.
Topics: Animals; Ceramics; Dental Materials; Flexural Strength; Materials Testing; Mice; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2023 |
Transient thermal stresses developed during speed sintering of 3 mol% yttria-stabilized tetragonal zirconia polycrystals.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Surface Properties; Yttrium; Zirconium | 2023 |
Infiltration OF 5Y-PSZ with thermally compatible glass: Strength, microstructure and failure mode analyses.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2023 |
Enhanced bioactivity and hydrothermal aging resistance of Y-TZP ceramics for dental implant.
Topics: Ceramics; Dental Implants; Dental Materials; Materials Testing; Proto-Oncogene Proteins c-akt; Surface Properties; Yttrium; Zirconium | 2023 |
Effect of superspeed sintering on translucency, opalescence, microstructure, and phase fraction of multilayered 4 mol% yttria-stabilized tetragonal zirconia polycrystal and 6 mol% yttria-stabilized partially stabilized zirconia ceramics.
Topics: Ceramics; Dental Materials; Iridescence; Materials Testing; Surface Properties; Yttrium; Zirconium | 2023 |
The Effect of Colloidal Silica and Glaze Coatings on the Adhesion of Zirconia with Various Ytrria Concentration.
Topics: Cementation; Ceramics; Dental Bonding; Materials Testing; Resin Cements; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2023 |
Influence of shading on zirconia's phase transformation and flexural strength after artificial aging.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; S Phase; Surface Properties; Yttrium; Zirconium | 2023 |
Evaluation of Er:YAG laser energy transmitted through novel dental zirconia ceramics.
Topics: Ceramics; Dental Porcelain; Lasers, Solid-State; Light; Materials Testing; Surface Properties; Yttrium; Zirconium | 2023 |
Translucent multi-layered zirconia: Sandblasting effect on optical and mechanical properties.
Topics: Ceramics; Dental Materials; Materials Testing; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2023 |
[Effects of surface treatment on the phase and fracture strength of yttria- and magnesia-stabilized zirconia implants].
Topics: Flexural Strength; Magnesium Oxide; Materials Testing; Surface Properties; Yttrium; Zirconium | 2023 |
Residual stress associated with crystalline phase transformation of 3-6 mol% yttria-stabilized zirconia ceramics induced by mechanical surface treatments.
Topics: Ceramics; Dental Materials; Dental Polishing; Diamond; Materials Testing; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2023 |
The impact of different polishing systems on yttria-stabilized tetragonal zirconia polycrystalline crowns in relation to heat generation.
Topics: Crowns; Hot Temperature; Yttrium; Zirconium | 2023 |
The effect of low-temperature degradation and building directions on the mechanical properties of additive-manufactured zirconia.
Topics: Ceramics; Cold Temperature; Materials Testing; Surface Properties; Temperature; Yttrium; Zirconium | 2023 |
Biological effects of gamma-ray sterilization on 3 mol% yttria-stabilized tetragonal zirconia polycrystal: An in vitro study.
Topics: Animals; Dental Materials; Materials Testing; Mice; Surface Properties; Titanium; Yttrium; Zirconium | 2023 |
A comparative study of mechanical properties of yttria stabilized zirconia monolithic and bilayer configuration for dental application.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Surface Properties; Yttrium; Zirconium | 2023 |
The effect of surface treatment and low-temperature degradation on flexural strength of additive manufactured zirconia.
Topics: Ceramics; Dental Materials; Flexural Strength; Materials Testing; Surface Properties; Temperature; Yttrium; Zirconium | 2023 |
Porphyromonas gingivalis can degrade dental zirconia.
Topics: Ceramics; Dental Materials; Materials Testing; Microscopy, Electron, Scanning; Porphyromonas gingivalis; Surface Properties; Water; Yttrium; Zirconium | 2023 |
Effect of sintering time on microstructure and optical properties of yttria-partially stabilized monolithic zirconia.
Topics: Ceramics; Dental Materials; Materials Testing; Surface Properties; Yttrium; Zirconium | 2023 |
Investigation of mechanical properties and low-temperature degradation of dental 3Y-TZP ceramics fabricated by stereolithography in combination with microwave sintering.
Topics: Ceramics; Dental Materials; Materials Testing; Microwaves; Stereolithography; Surface Properties; Temperature; Yttrium; Zirconium | 2023 |