Page last updated: 2024-08-22

zirconium and lithium

zirconium has been researched along with lithium in 91 studies

Research

Studies (91)

TimeframeStudies, this research(%)All Research%
pre-19904 (4.40)18.7374
1990's2 (2.20)18.2507
2000's9 (9.89)29.6817
2010's28 (30.77)24.3611
2020's48 (52.75)2.80

Authors

AuthorsStudies
Haug, A; Suhayda, CG1
Alberti, G; Allulli, S; Conte, A1
Kraus, KA; Michelson, DC; Nelson, F; Phillips, HO1
Denry, IL; Rosenstiel, SF1
Deany, IL1
Barton, L; Rath, NP; Thomas, RL1
Li, S; Long, S1
Ida, J; Lin, YS1
BAICHIKOV, AG; INGERMAN, VP; SEREBRIANAIA, AG1
Herbst-Irmer, R; Jancik, V; Neculai, AM; Neculai, D; Roesky, HW1
Raigrodski, AJ1
Carmichael, CD; Fryzuk, MD; Morello, L; Patrick, BO; Yu, P1
Borgo, CA; Gushikem, Y1
Bergman, RG; Chiu, M; Hoyt, HM; Michael, FE; van Halbeek, H1
Banno, M; Takamura, Y; Tamiya, E1
Drücker, H; Feyerabend, F; Fischer, J; Holtz, J; Hort, N; Vogt, C; Willumeit, R; Witte, F1
Dutta, B; Lahiri, S; Maiti, M1
Dixon, S; Stec, J; Thomas, E; Whitby, RJ1
Adamopoulos, G; Anthopoulos, TD; Bradley, DD; McLachlan, MA; Thomas, S; Wöbkenberg, PH1
Brik, MG; Gandhi, Y; Rao, DK; Ravi Kumar, V; Srikumar, T; Srinivasa Rao, Ch; Veeraiah, N1
Arandiyan, H; Chen, J; Li, D; Li, J; Shi, W; Zhang, X1
Baillie, SE; Blair, VL; Blakemore, DC; Hay, D; Hevia, E; Kennedy, AR; Pryde, DC1
Arnold, J; Brothers, PJ; Buckley, HL; Chomitz, WA; Gryko, DT; Koszarna, B; Tasior, M1
Dou, SX; Heo, YU; Hwang, SM; Jeong, G; Kim, JG; Kim, JH; Kim, KJ; Kim, YJ; Liao, T; Park, JH; Park, MS; Sun, Z1
Lai, R; Liu, R; Longquan, S; Ma, S; Sun, T; Zhou, S; Zhou, Z1
Elnaghy, AM; Elsaka, SE1
André, M; Kou, W; Sjögren, G; Sundh, A1
Hickel, R; Koller, C; Mehl, A; Zimmermann, M1
Kern, M; Sieper, K; Wille, S1
Bottino, MA; de Melo, RM; Guilardi, LF; Monteiro, JB; Oliani, MG; Prochnow, C; Rocha Pereira, GK; Valandro, LF1
Fathy, SM; Swain, MV1
Alp, G; Johnston, WM; Subaşı, MG; Yilmaz, B1
Springall, GAC; Yin, L1
Borges, ALS; de Melo, RM; Guilardi, LF; Monteiro, JB; Pereira, GKR; Prochnow, C; Riquieri, H; Valandro, LF1
Gutiérrez-Pérez, JL; Luna-Oliva, I; Rizo-Gorrita, M; Serrera-Figallo, MÁ; Torres-Lagares, D1
Borges, ALS; Bottino, MA; Dal Piva, AMO; Penteado, MM; Tribst, JPM1
Cho, LR; Huh, YH; Ko, KH; Lee, YH; Park, CJ1
Belli, R; Lohbauer, U; Wendler, M1
Bergamo, ETP; Bonfante, EA; Bordin, D; Coelho, PG; Del Bel Cury, AA; Gomes, RS; Kaizer, M; Lopes, ACO; Ramalho, IS; Witek, L1
Diniz, V; Melo, RM; Monteiro, JB; Prado, PHCO; Rodrigues, JVM1
Armbruster, P; Ballard, R; Gardiner, R; Kee, E; Xu, X; Yu, Q1
Alves, LMM; Bottino, MA; Campos, TMB; Contreras, LPC; Melo, RM; Valandro, LF1
Leha, A; Pfitzenreuter, T; Rinke, S; Roediger, M; Ziebolz, D1
Bömicke, W; Krisam, J; Rammelsberg, P; Rues, S1
Han, Y; Jia, Z; Li, B; Liu, X; Liu, Y; Ruan, L; Takashima, K; Wu, S; Xia, D; Yuan, W; Zheng, Y; Zhou, Y; Zhu, D1
Brandt, A; Hausdoerfer, T; Leha, A; Rinke, S; Ziebolz, D1
Babaee Hemmati, Y; Falahchai, M; Neshandar Asli, H; Rezaei, E1
Geis-Gerstorfer, J; Huettig, F; Schweitzer, F; Spintzyk, S1
Itthipongsatorn, N; Srisawasdi, S1
Anami, LC; Bonfante, EA; Bottino, MA; Dal Piva, AMO; Kleverlaan, CJ; Tribst, JPM; Venturini, AB1
Recen, D; Tekeli Simsek, A; Yildirim, B1
Babaee Hemmati, Y; Falahchai, M; Neshandar Asli, H; Neshandar Asli, M1
Alizadeh, P; Ghayebloo, M1
Condé Oliveira Prado, PH; Diniz, V; Meireles Rodrigues, JV; Melo, RM; Monteiro, JB; Valandro, LF; Zucuni, C1
Addison, O; Fleming, GJ; Guo, Y; Rae, N; Romanyk, DL; Sirovica, S; Veldhuis, S1
Fan, Y; Moeeduddin, M; Nathanson, D1
Breschi, L; Leone, R; Leuci, S; Ruggiero, G; Sorrentino, R; Zarone, F1
Buranadham, S; Guazzato, M; Thammajaruk, P; Wang, Y1
Breschi, L; Di Mauro, MI; Leuci, S; Ruggiero, G; Sorrentino, R; Zarone, F1
Kırarslan, Ö; Paken, G; Tekeli, A; Ünal, M; Yıldırım, B1
Dalla-Nora, F; Guilardi, LF; Rippe, MP; Valandro, LF; Zucuni, CP2
Çakmak, G; Donmez, MB; Johnston, WM; Kashkari, A; Yilmaz, B1
Hausdörfer, T; Leha, A; Rinke, S; Wassmann, T; Ziebolz, D; Zuck, T1
Cho, LR; Huh, YH; Ko, KH; Park, CJ; Sung, HG1
Akbar, AA; Baig, MR; Behbehani, Z; Sabti, MY1
Srisawasdi, S; Watananiyom, R1
Baldi, A; Breschi, L; Comba, A; Ferrero, G; Italia, E; Mazzoni, A; Michelotto Tempesta, R; Paolone, G; Scotti, N1
Müller, L; Rauch, A; Reissmann, DR; Schierz, O1
Hong, DW; Yu, H; Zhang, LX; Zheng, M1
Ning, C; Shao, Y; Wang, F1
Peskersoy, C; Sahan, HM1
Caputi, S; Macrì, M; Mavriqi, L; Murmura, G; Sinjari, B; Traini, T; Trubiani, O; Valente, F1
Amini, A; Berahman, P; Ghodsi, S; Sahebi, M; Zeighami, S1
de Carvalho, R; Leite, F; Lima, CM; Martins, JD; Moura, D; Souza, R1
He, YP; Ma, HR; Song, XF; Yin, L1
Abou-Ayash, S; Belser, UC; Brägger, U; Flury, S; Molinero-Mourelle, P; Schönenberger, A1
Donmez, MB; Kandemir, B; Okutan, Y; Yucel, MT1
Demirel, M; Diken Türksayar, AA; Donmez, MB1
Bing, Z; Guo, J; Lu, D; Tsoi, J; Wang, X; Wang, Y; Yang, J; Zhao, X1
Fehmer, V; Hicklin, SP; Mojon, P; Sailer, I; Strasding, M; Todorovic, A1
Gao, L; Hao, Z; Hui, R; Ma, Y; Meng, Y; Wang, Y; Wu, X1
Ellayeh, M; Kasem, AT; Özcan, M; Sakrana, AA1
Benli, M; Martinez, JL; Schwartz, S; Turkyilmaz, I1
Atta, O; Bourauel, C; Fouda, AM; Glaum, R; Özcan, M; Stawarczyk, B1
Aladağ, SÜ; Ayaz, EA1
Chen, H; Li, WW; Sun, YC; Wang, Y1
Chen, H; Liang, S; Sun, Y; Yuan, F1
Carvalho, O; Henriques, B; Özcan, M; Raffaele-Esposito, A; Silva, F; Souza, JCM1
Bottino, MA; Campos, TMB; da Rocha Scalzer Lopes, G; de Carvalho Ramos, N; de Matos, JDM; Queiroz, DA1
Beh, YH; Goo, CL; Yim, KY1

Reviews

7 review(s) available for zirconium and lithium

ArticleYear
Recent advances in ceramics for dentistry.
    Critical reviews in oral biology and medicine : an official publication of the American Association of Oral Biologists, 1996, Volume: 7, Issue:2

    Topics: Aluminum Compounds; Aluminum Oxide; Aluminum Silicates; Ceramics; Chemical Phenomena; Chemistry, Physical; Crystallography; Dental Materials; Dental Prosthesis Design; Dental Restoration, Permanent; Durapatite; Glass; Hot Temperature; Humans; Lithium; Magnesium Oxide; Magnesium Silicates; Potassium Compounds; Silicates; Stress, Mechanical; Technology, Dental; Zirconium

1996
All-ceramic full-coverage restorations: concepts and guidelines for material selection.
    Practical procedures & aesthetic dentistry : PPAD, 2005, Volume: 17, Issue:4

    Topics: Aluminum Oxide; Aluminum Silicates; Ceramics; Dental Cavity Preparation; Dental Porcelain; Dental Restoration, Permanent; Humans; Lithium; Magnesium Oxide; Yttrium; Zirconium

2005
Zirconia-reinforced lithium silicate (ZLS) mechanical and biological properties: A literature review.
    Journal of dentistry, 2021, Volume: 109

    Topics: Ceramics; Computer-Aided Design; Dental Porcelain; Dental Stress Analysis; Lithium; Materials Testing; Silicates; Surface Properties; Zirconium

2021
Optical behaviors, surface treatment, adhesion, and clinical indications of zirconia-reinforced lithium silicate (ZLS): A narrative review.
    Journal of dentistry, 2021, Volume: 112

    Topics: Ceramics; Computer-Aided Design; Dental Porcelain; Lithium; Materials Testing; Silicates; Surface Properties; Zirconium

2021
Is the bond strength of zirconia-reinforced lithium silicate lower than that of lithium disilicate? - A systematic review and meta-analysis.
    Journal of prosthodontic research, 2022, Oct-07, Volume: 66, Issue:4

    Topics: Ceramics; Composite Resins; Dental Porcelain; Dental Stress Analysis; Lithium; Materials Testing; Resin Cements; Silicates; Surface Properties; Zirconium

2022
Clinical performance of lithium disilicate and zirconia CAD/CAM crowns using digital impressions: A systematic review.
    Primary dental journal, 2022, Volume: 11, Issue:4

    Topics: Ceramics; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Humans; Lithium; Prospective Studies; Randomized Controlled Trials as Topic; Retrospective Studies; Zirconium

2022
Surface modification of zirconia or lithium disilicate-reinforced glass ceramic by laser texturing to increase the adhesion of prosthetic surfaces to resin cements: an integrative review.
    Clinical oral investigations, 2023, Volume: 27, Issue:7

    Topics: Carbon Dioxide; Ceramics; Dental Bonding; Dental Porcelain; Lasers, Solid-State; Lithium; Materials Testing; Resin Cements; Shear Strength; Surface Properties; Zirconium

2023

Trials

2 trial(s) available for zirconium and lithium

ArticleYear
Prospective clinical evaluation of chairside-fabricated zirconia-reinforced lithium silicate ceramic partial crowns-5-year results.
    Clinical oral investigations, 2022, Volume: 26, Issue:2

    Topics: Bicuspid; Ceramics; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Humans; Lithium; Materials Testing; Prospective Studies; Silicates; Zirconium

2022
A multicenter randomized controlled clinical pilot study of buccally micro-veneered lithium-disilicate and zirconia crowns supported by titanium base abutments: 1-year outcomes.
    Clinical oral implants research, 2023, Volume: 34, Issue:1

    Topics: Biological Products; Ceramics; Crowns; Dental Abutments; Dental Porcelain; Dental Restoration Failure; Humans; Lithium; Pilot Projects; Titanium; Zirconium

2023

Other Studies

82 other study(ies) available for zirconium and lithium

ArticleYear
Metal-induced conformational changes in calmodulin.
    Bulletin of environmental contamination and toxicology, 1987, Volume: 38, Issue:2

    Topics: 2',3'-Cyclic-Nucleotide Phosphodiesterases; Calcium; Calmodulin; Fluorescence; Lithium; Metals; Protein Conformation; Yttrium; Zirconium

1987
Ion exchange in fused salts. II. Distribution coefficients of some alkali metal ions on zirconium phosphate in fused nitrates.
    Journal of chromatography, 1966, Volume: 24, Issue:1

    Topics: Chromatography, Ion Exchange; Diphosphates; Lithium; Nitrates; Phosphates; Potassium; Sodium; Zirconium

1966
Ion exchange procedures. VII. Separation of alkali metal ions.
    Journal of chromatography, 1965, Volume: 20, Issue:1

    Topics: Cerium; Chromatography, Ion Exchange; Francium; Hydrochloric Acid; Lithium; Methanol; Phosphates; Potassium; Rubidium; Zirconium

1965
Flexural strength and fracture toughness of Dicor glass-ceramic after embedment modification.
    Journal of dental research, 1993, Volume: 72, Issue:3

    Topics: Aluminum; Aluminum Compounds; Calcium; Ceramics; Crystallography; Dental Porcelain; Elasticity; Electron Probe Microanalysis; Fluorides; Glass; Hardness; Lithium; Lithium Compounds; Magnesium; Magnesium Silicates; Materials Testing; Potassium; Silicic Acid; Silicon; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Zirconium

1993
Formation of metallaboranes from the group IV transition metals and pentaborane(9): crystal and molecular structure of [(Cp(2)Zr)(2)B(5)H(8)][B(11)H(14)].
    Inorganic chemistry, 2002, Jan-14, Volume: 41, Issue:1

    Topics: Boranes; Chemical Phenomena; Chemistry, Physical; Hafnium; Halogens; Lithium; Magnetic Resonance Spectroscopy; Molecular Conformation; Organometallic Compounds; Polymers; Silicon Dioxide; Titanium; X-Ray Diffraction; Zirconium

2002
[Effects of manganese, zircon and lithium alone on rat liver lipid peroxidation].
    Wei sheng yan jiu = Journal of hygiene research, 2001, Volume: 30, Issue:3

    Topics: Animals; Female; Lipid Peroxidation; Lithium; Liver; Male; Manganese; Rats; Zirconium

2001
Mechanism of high-temperature CO2 sorption on lithium zirconate.
    Environmental science & technology, 2003, May-01, Volume: 37, Issue:9

    Topics: Adsorption; Air Pollution; Carbon Dioxide; Fossil Fuels; Incineration; Lithium; Models, Chemical; Power Plants; Temperature; X-Ray Diffraction; Zirconium

2003
[Use of rare metals in the treatment of various diseases].
    Meditsinskaia promyshlennost' SSSR, 1962, Volume: 8

    Topics: Cesium; Humans; Lithium; Metals; Tantalum; Titanium; Zirconium

1962
Preparation of [LAl(mu-S)2MCp2] (M = Ti, Zr) from the structurally characterized lithium complexes [[LAl(SH)[SLi(thf)2]]2] and [[LAl[(SLi)2(thf)3]]2]2 THF.
    Angewandte Chemie (International ed. in English), 2004, Nov-19, Volume: 43, Issue:45

    Topics: Aluminum; Crystallography, X-Ray; Lithium; Models, Molecular; Molecular Structure; Organometallic Compounds; Sulfur; Titanium; Zirconium

2004
Formation of phosphorus-nitrogen bonds by reduction of a titanium phosphine complex under molecular nitrogen.
    Journal of the American Chemical Society, 2005, Sep-21, Volume: 127, Issue:37

    Topics: Crystallography, X-Ray; Ligands; Lithium; Models, Molecular; Molecular Conformation; Nitrogen; Organometallic Compounds; Oxidation-Reduction; Phosphines; Phosphorus; Silicon; Stereoisomerism; Titanium; Zirconium

2005
Zirconium phosphate dispersed on a cellulose fiber surface: preparation, characterization, and selective adsorption of Li+, Na+, and K+ from aqueous solution.
    Journal of colloid and interface science, 2002, Feb-15, Volume: 246, Issue:2

    Topics: Adsorption; Cations, Monovalent; Cellulose; Lithium; Potassium; Sodium; Solutions; Zirconium

2002
Synthesis, structural characterization, and quantitative basicity studies of lithium zirconimidate complexes.
    Angewandte Chemie (International ed. in English), 2008, Volume: 47, Issue:32

    Topics: Hydrogen-Ion Concentration; Imidoesters; Lithium; Molecular Structure; Zirconium

2008
Determination of trace amounts of sodium and lithium in zirconium dioxide (ZrO2) using liquid electrode plasma optical emission spectrometry.
    Analytica chimica acta, 2009, Feb-23, Volume: 634, Issue:2

    Topics: Electrodes; Lithium; Sodium; Spectrophotometry; Zirconium

2009
Evaluation of short-term effects of rare earth and other elements used in magnesium alloys on primary cells and cell lines.
    Acta biomaterialia, 2010, Volume: 6, Issue:5

    Topics: Alloys; Animals; Apoptosis; Calcium; Cell Line; Cell Survival; Cytokines; Dose-Response Relationship, Drug; Humans; Inflammation; Lithium; Macrophages; Magnesium; Metals, Rare Earth; Mice; Osteoblasts; Regression Analysis; Stem Cells; Time Factors; Zirconium

2010
Separation of no-carrier-added (93,94,94m,95,96)Tc from (7)Li induced natural Zr target by liquid-liquid extraction.
    Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine, 2010, Volume: 68, Issue:1

    Topics: Lithium; Particle Accelerators; Radiopharmaceuticals; Technetium; Zirconium

2010
Tandem insertion of halocarbenoids and lithium acetylides into zirconacycles: a novel rearrangement to zirconium alkenylidenates by β-addition to an alkynyl zirconocene.
    Chemistry (Weinheim an der Bergstrasse, Germany), 2011, Apr-18, Volume: 17, Issue:17

    Topics: Alkynes; Catalysis; Cyclopentanes; Lithium; Molecular Structure; Organometallic Compounds; Stereoisomerism; Zirconium

2011
High-mobility low-voltage ZnO and Li-doped ZnO transistors based on ZrO₂ high-k dielectric grown by spray pyrolysis in ambient air.
    Advanced materials (Deerfield Beach, Fla.), 2011, Apr-26, Volume: 23, Issue:16

    Topics: Air; Boron Compounds; Electricity; Lithium; Tin Compounds; Transistors, Electronic; Zinc Oxide; Zirconium

2011
Spectral and fluorescent kinetics features of Nd3+ ion in Nb2O5, Ta2O5 and La2O3 mixed lithium zirconium silicate glasses.
    Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy, 2011, Oct-15, Volume: 81, Issue:1

    Topics: Fluorescence; Glass; Ions; Kinetics; Lanthanum; Lithium; Neodymium; Niobium; Oxides; Silicates; Spectrometry, Fluorescence; Spectrum Analysis; Tantalum; Zirconium

2011
Roles of Li+ and Zr4+ cations in the catalytic performances of Co(1-x)M(x)Cr(2)O(4) (M = Li, Zr; x = 0-0.2) for methane combustion.
    Environmental science & technology, 2011, Oct-01, Volume: 45, Issue:19

    Topics: Adsorption; Catalysis; Cations; Lithium; Methane; Oxidation-Reduction; Oxides; Oxygen; Photoelectron Spectroscopy; Spectrometry, X-Ray Emission; Spectrum Analysis, Raman; Surface Properties; Temperature; X-Ray Diffraction; Zirconium

2011
New lithium-zincate approaches for the selective functionalisation of pyrazine: direct dideprotozincation vs. nucleophilic alkylation.
    Chemical communications (Cambridge, England), 2012, Feb-14, Volume: 48, Issue:14

    Topics: Alkylation; Heterocyclic Compounds; Lithium; Magnetic Resonance Spectroscopy; Molecular Conformation; Protons; Pyrazines; Temperature; Zirconium

2012
Synthesis of lithium corrole and its use as a reagent for the preparation of cyclopentadienyl zirconium and titanium corrole complexes.
    Chemical communications (Cambridge, England), 2012, Nov-11, Volume: 48, Issue:87

    Topics: Lithium; Models, Molecular; Molecular Structure; Organometallic Compounds; Porphyrins; Titanium; Zirconium

2012
Zr4+ doping in Li4Ti5O12 anode for lithium-ion batteries: open Li+ diffusion paths through structural imperfection.
    ChemSusChem, 2014, Volume: 7, Issue:5

    Topics: Electric Power Supplies; Electrochemical Techniques; Electrodes; Lithium; Nanofibers; Titanium; Zirconium

2014
Load-bearing capacity and the recommended thickness of dental monolithic zirconia single crowns.
    Journal of the mechanical behavior of biomedical materials, 2014, Volume: 35

    Topics: Cementation; Ceramics; Crowns; Dental Cements; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Humans; Lithium; Materials Testing; Metal Ceramic Alloys; Microscopy, Electron, Scanning; Stress, Mechanical; Tooth; Weight-Bearing; Zirconium

2014
Mechanical properties of zirconia reinforced lithium silicate glass-ceramic.
    Dental materials : official publication of the Academy of Dental Materials, 2016, Volume: 32, Issue:7

    Topics: Ceramics; Dental Porcelain; Lithium; Materials Testing; Silicates; Surface Properties; Zirconium

2016
Effects of pretreatments and hydrothermal aging on biaxial flexural strength of lithium di-silicate and Mg-PSZ ceramics.
    Journal of dentistry, 2016, Volume: 55

    Topics: Ceramics; Dental Porcelain; Humans; Lithium; Materials Testing; Pliability; Silicates; Surface Properties; Zirconium

2016
Indirect zirconia-reinforced lithium silicate ceramic CAD/CAM restorations: Preliminary clinical results after 12 months.
    Quintessence international (Berlin, Germany : 1985), 2017, Volume: 48, Issue:1

    Topics: Ceramics; Computer-Aided Design; Crowns; Dental Prosthesis Design; Dental Restoration Failure; Dental Restoration, Permanent; Female; Humans; Lithium; Male; Middle Aged; Silicates; Surface Properties; Treatment Outcome; Zirconium

2017
Fracture strength of lithium disilicate crowns compared to polymer-infiltrated ceramic-network and zirconia reinforced lithium silicate crowns.
    Journal of the mechanical behavior of biomedical materials, 2017, Volume: 74

    Topics: Ceramics; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Lithium; Materials Testing; Polymers; Silicates; Zirconium

2017
Fatigue failure load of zirconia-reinforced lithium silicate glass ceramic cemented to a dentin analogue: Effect of etching time and hydrofluoric acid concentration.
    Journal of the mechanical behavior of biomedical materials, 2018, Volume: 77

    Topics: Bisphenol A-Glycidyl Methacrylate; Ceramics; Composite Resins; Dental Bonding; Dental Etching; Dental Porcelain; Dental Stress Analysis; Hydrofluoric Acid; Lithium; Materials Testing; Shear Strength; Silicates; Surface Properties; Zirconium

2018
In-vitro wear of natural tooth surface opposed with zirconia reinforced lithium silicate glass ceramic after accelerated ageing.
    Dental materials : official publication of the Academy of Dental Materials, 2018, Volume: 34, Issue:3

    Topics: Ceramics; Dental Materials; Hardness; Hydrogen-Ion Concentration; In Vitro Techniques; Lithium; Materials Testing; Silicates; Spectroscopy, Fourier Transform Infrared; Surface Properties; Tooth Wear; Zirconium

2018
Effect of thickness on optical properties of monolithic CAD-CAM ceramics.
    Journal of dentistry, 2018, Volume: 71

    Topics: Ceramics; Coffee; Color; Computer-Aided Design; Dental Porcelain; Dental Prosthesis Design; Humans; Lithium; Lithium Compounds; Materials Testing; Prosthesis Coloring; Silicates; Surface Properties; Zirconium

2018
Nano-scale mechanical behavior of pre-crystallized CAD/CAM zirconia-reinforced lithium silicate glass ceramic.
    Journal of the mechanical behavior of biomedical materials, 2018, Volume: 82

    Topics: Ceramics; Computer-Aided Design; Crystallization; Lithium; Materials Testing; Mechanical Phenomena; Nanotechnology; Silicates; Zirconium

2018
Fatigue failure load of two resin-bonded zirconia-reinforced lithium silicate glass-ceramics: Effect of ceramic thickness.
    Dental materials : official publication of the Academy of Dental Materials, 2018, Volume: 34, Issue:6

    Topics: Ceramics; Dental Bonding; Dental Materials; Dental Restoration Failure; Dental Stress Analysis; Finite Element Analysis; Lithium; Materials Testing; Resin Cements; Silicates; Surface Properties; Zirconium

2018
Comparison of Cytomorphometry and Early Cell Response of Human Gingival Fibroblast (HGFs) between Zirconium and New Zirconia-Reinforced Lithium Silicate Ceramics (ZLS).
    International journal of molecular sciences, 2018, Sep-11, Volume: 19, Issue:9

    Topics: Biocompatible Materials; Cell Line; Cell Movement; Cell Proliferation; Ceramics; Fibroblasts; Gingiva; Humans; Lithium; Materials Testing; Prostheses and Implants; Silicates; Surface Properties; Zirconium

2018
Influence of ceramic material, thickness of restoration and cement layer on stress distribution of occlusal veneers.
    Brazilian oral research, 2018, Nov-29, Volume: 32

    Topics: Analysis of Variance; Ceramics; Dental Cements; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Restoration, Permanent; Dental Stress Analysis; Dental Veneers; Elastic Modulus; Finite Element Analysis; Humans; Lithium; Materials Testing; Reference Values; Reproducibility of Results; Resin Cements; Silicate Cement; Tensile Strength; Zirconium

2018
Effects of Lithium and Phosphorus on the Efficacy of a Liner for Increasing the Shear Bond Strength Between Lithium Disilicate and Zirconia.
    The journal of adhesive dentistry, 2018, Volume: 20, Issue:6

    Topics: Dental Bonding; Dental Porcelain; Dental Veneers; Humans; Lithium; Materials Testing; Microscopy, Electron, Scanning; Phosphorus; Shear Strength; Surface Properties; Zirconium

2018
Factors influencing development of residual stresses during crystallization firing in a novel lithium silicate glass-ceramic.
    Dental materials : official publication of the Academy of Dental Materials, 2019, Volume: 35, Issue:6

    Topics: Ceramics; Crowns; Crystallization; Dental Porcelain; Dental Stress Analysis; Lithium; Materials Testing; Silicates; Surface Properties; Zirconium

2019
Zirconia-reinforced lithium silicate crowns: Effect of thickness on survival and failure mode.
    Dental materials : official publication of the Academy of Dental Materials, 2019, Volume: 35, Issue:7

    Topics: Ceramics; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Lithium; Materials Testing; Reproducibility of Results; Silicates; Zirconium

2019
Impact of Acid Concentration and Firing on the Long-term Bond Strength of a Zirconia-Lithium Silicate Ceramic Following Adhesive Cementation.
    The journal of adhesive dentistry, 2019, Volume: 21, Issue:4

    Topics: Cementation; Ceramics; Dental Bonding; Dental Cements; Dental Porcelain; Dental Stress Analysis; Lithium; Materials Testing; Resin Cements; Silanes; Silicates; Surface Properties; Tensile Strength; Zirconium

2019
Shear bond strength of orthodontic brackets bonded to a new all-ceramic crown composed of lithium silicate infused with zirconia: An in vitro comparative study.
    International orthodontics, 2019, Volume: 17, Issue:4

    Topics: Acid Etching, Dental; Ceramics; Computer-Aided Design; Dental Bonding; Dental Enamel; Dental Porcelain; Humans; Hydrofluoric Acid; Lithium; Orthodontic Brackets; Shear Strength; Silicates; Stress, Mechanical; Surface Properties; Zirconium

2019
In vitro wear of a zirconium-reinforced lithium silicate ceramic against different restorative materials.
    Journal of the mechanical behavior of biomedical materials, 2019, Volume: 100

    Topics: Ceramics; Dental Porcelain; Dental Restoration Wear; Dental Stress Analysis; Hardness; In Vitro Techniques; Lithium; Magnesium Oxide; Materials Testing; Microscopy, Electron, Scanning; Resins, Synthetic; Silicates; Silicon Dioxide; Surface Properties; Zirconium

2019
Clinical evaluation of chairside-fabricated partial crowns composed of zirconia-reinforced lithium silicate ceramics: 3-year results of a prospective practice-based study.
    Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.], 2020, Volume: 32, Issue:2

    Topics: Ceramics; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Humans; Lithium; Prospective Studies; Silicates; Zirconium

2020
The Effects of Surface Conditioning and Aging on the Bond Strength Between Composite Cement and Zirconia-reinforced Lithium-Silicate Glass-Ceramics.
    The journal of adhesive dentistry, 2019, Volume: 21, Issue:6

    Topics: Ceramics; Composite Resins; Dental Bonding; Dental Porcelain; Lithium; Materials Testing; Resin Cements; Silanes; Silicates; Surface Properties; Tensile Strength; Zirconium

2019
Controllable biodegradation and enhanced osseointegration of ZrO
    Acta biomaterialia, 2020, 03-15, Volume: 105

    Topics: Absorbable Implants; Alloys; Animals; Cell Death; Cell Line; Cell Survival; Electrochemistry; Lithium; Male; Mice; Nanoparticles; Organ Specificity; Osseointegration; Photoelectron Spectroscopy; Rats, Sprague-Dawley; Surface Properties; X-Ray Diffraction; Zinc; Zirconium

2020
Clinical Evaluation of Chairside-Fabricated Partial Crowns Made of Zirconia- Reinforced Lithium Silicate Ceramic - 2-Year-Results.
    The European journal of prosthodontics and restorative dentistry, 2020, Feb-27, Volume: 28, Issue:1

    Topics: Ceramics; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Female; Humans; Lithium; Male; Materials Testing; Prospective Studies; Silicates; Zirconium

2020
Effect of Tooth Preparation Design on Fracture Resistance of Zirconia-Reinforced Lithium Silicate Overlays.
    Journal of prosthodontics : official journal of the American College of Prosthodontists, 2020, Volume: 29, Issue:7

    Topics: Ceramics; Computer-Aided Design; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Humans; Lithium; Materials Testing; Silicates; Tooth Preparation; Zirconium

2020
Influence of minimal extended firing on dimensional, optical, and mechanical properties of crystalized zirconia-reinforced lithium silicate glass ceramic.
    Journal of the mechanical behavior of biomedical materials, 2020, Volume: 104

    Topics: Ceramics; Computer-Aided Design; Dental Porcelain; Dental Stress Analysis; Lithium; Materials Testing; Silicates; Surface Properties; Zirconium

2020
Dentin microshear bond strength of various resin luting agents to zirconia-reinforced lithium silicate ceramics.
    The Journal of prosthetic dentistry, 2020, Volume: 124, Issue:2

    Topics: Ceramics; Dental Bonding; Dental Cements; Dental Stress Analysis; Dentin; Humans; Lithium; Materials Testing; Resin Cements; Silicates; Zirconium

2020
Survival probability of zirconia-reinforced lithium silicate ceramic: Effect of surface condition and fatigue test load profile.
    Dental materials : official publication of the Academy of Dental Materials, 2020, Volume: 36, Issue:6

    Topics: Ceramics; Dental Porcelain; Dental Stress Analysis; Lithium; Materials Testing; Probability; Reproducibility of Results; Silicates; Surface Properties; Zirconium

2020
Effect of cement color and tooth-shaded background on the final color of lithium disilicate and zirconia-reinforced lithium silicate ceramics: An in vitro study.
    Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.], 2021, Volume: 33, Issue:2

    Topics: Ceramics; Color; Dental Porcelain; Lithium; Materials Testing; Silicates; Surface Properties; Zirconium

2021
Marginal adaptation of zirconia-reinforced lithium silicate overlays with different preparation designs.
    Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.], 2020, Volume: 32, Issue:8

    Topics: Ceramics; Computer-Aided Design; Dental Marginal Adaptation; Dental Porcelain; Dental Prosthesis Design; Humans; Lithium; Materials Testing; Silicates; Zirconium

2020
Effect of zirconia nanoparticles on ZrO
    Journal of the mechanical behavior of biomedical materials, 2020, Volume: 110

    Topics: Ceramics; Dental Porcelain; Lithium; Materials Testing; Nanoparticles; Silicates; Silicon Dioxide; Surface Properties; Zirconium

2020
Ceramic firing protocols and thermocycling: effects on the load-bearing capacity under fatigue of a bonded zirconia lithium silicate glass-ceramic.
    Journal of the mechanical behavior of biomedical materials, 2020, Volume: 110

    Topics: Ceramics; Dental Porcelain; Dental Stress Analysis; Lithium; Materials Testing; Silicates; Surface Properties; Weight-Bearing; Zirconium

2020
Strength-limiting damage and its mitigation in CAD-CAM zirconia-reinforced lithium-silicate ceramics machined in a fully crystallized state.
    Dental materials : official publication of the Academy of Dental Materials, 2020, Volume: 36, Issue:12

    Topics: Ceramics; Computer-Aided Design; Dental Porcelain; Lithium; Materials Testing; Silicates; Surface Properties; Zirconium

2020
Effect of Firing Cycle and Etching Protocols on Tensile Bond Strength of Composite Cement to Zirconium-incorporated Lithium-Silicate Glass Ceramic.
    The journal of adhesive dentistry, 2020, Volume: 22, Issue:6

    Topics: Ceramics; Dental Bonding; Dental Porcelain; Lithium; Materials Testing; Resin Cements; Silicates; Surface Properties; Tensile Strength; Zirconium

2020
Shear Bond Strength of Composite Cement to Lithium-Disilicate Glass-coated Zirconia Versus Alumina Air-abraded Zirconia.
    The journal of adhesive dentistry, 2021, Jun-05, Volume: 23, Issue:3

    Topics: Aluminum Oxide; Dental Bonding; Lithium; Materials Testing; Resin Cements; Surface Properties; Zirconium

2021
Colour agreement between try-in paste and resin cement: effect of background on zirconia-reinforced lithium silicate.
    Australian dental journal, 2021, Volume: 66, Issue:4

    Topics: Ceramics; Color; Dental Porcelain; Humans; Lithium; Materials Testing; Resin Cements; Silicates; Surface Properties; Zirconium

2021
Fatigue Behavior of Monolithic Zirconia-Reinforced Lithium Silicate Ceramic Restorations: Effects of Conditionings of the Intaglio Surface and the Resin Cements.
    Operative dentistry, 2021, May-01, Volume: 46, Issue:3

    Topics: Ceramics; Dental Porcelain; Dental Stress Analysis; Lithium; Materials Testing; Resin Cements; Silicates; Surface Properties; Zirconium

2021
Effect of thickness, cement shade, and coffee thermocycling on the optical properties of zirconia reinforced lithium silicate ceramic.
    Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.], 2021, Volume: 33, Issue:8

    Topics: Ceramics; Coffee; Color; Computer-Aided Design; Dental Porcelain; Humans; Lithium; Materials Testing; Resin Cements; Silicates; Surface Properties; Zirconium

2021
Composite Cement Components Stabilize the Bond between a Lithium-Disilicate Glass-Ceramic and the Titanium Abutment.
    The journal of adhesive dentistry, 2021, Oct-01, Volume: 23, Issue:5

    Topics: Ceramics; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Lithium; Materials Testing; Methacrylates; Resin Cements; Surface Properties; Titanium; Zirconium

2021
Evaluation of Marginal and Internal Fit of a CAD/CAM Monolithic Zirconia-Reinforced Lithium Silicate Porcelain Laminate Veneer System.
    Journal of prosthodontics : official journal of the American College of Prosthodontists, 2022, Volume: 31, Issue:6

    Topics: Ceramics; Computer-Aided Design; Crowns; Dental Marginal Adaptation; Dental Porcelain; Dental Prosthesis Design; Lithium; Materials Testing; Silicates; Zirconium

2022
Influence of fatigue load on various adhesive resin luting agents in a zirconia-reinforced lithium silicate ceramic bonded to dentin.
    American journal of dentistry, 2021, Volume: 34, Issue:5

    Topics: Ceramics; Dental Bonding; Dental Cements; Dental Stress Analysis; Dentin; Dentin-Bonding Agents; Humans; Lithium; Materials Testing; Resin Cements; Silicates; Surface Properties; Zirconium

2021
External gap progression after cyclic fatigue of adhesive overlays and crowns made with high translucency zirconia or lithium silicate.
    Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.], 2022, Volume: 34, Issue:3

    Topics: Ceramics; Computer-Aided Design; Crowns; Dental Cements; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Lithium; Materials Testing; Silicates; X-Ray Microtomography; Zirconium

2022
Impact of cement type and abutment height on pull-off force of zirconia reinforced lithium silicate crowns on titanium implant stock abutments: an in vitro study.
    BMC oral health, 2021, 11-19, Volume: 21, Issue:1

    Topics: Crowns; Dental Abutments; Dental Cements; Dental Implants; Dental Prosthesis Retention; Dental Prosthesis, Implant-Supported; Dental Stress Analysis; Humans; Lithium; Materials Testing; Silicates; Titanium; Zirconium

2021
Sol-gel preparation of ZrO
    Journal of the mechanical behavior of biomedical materials, 2022, Volume: 126

    Topics: Ceramics; Dental Porcelain; Lithium; Materials Testing; Porosity; Surface Properties; Zirconium

2022
Finite element analysis and nanomechanical properties of composite and ceramic dental onlays.
    Computer methods in biomechanics and biomedical engineering, 2022, Volume: 25, Issue:14

    Topics: Ceramics; Composite Resins; Computer-Aided Design; Dental Porcelain; Dental Stress Analysis; Finite Element Analysis; Inlays; Lithium; Materials Testing; Surface Properties; Zirconium

2022
Lithium disilicate and zirconia reinforced lithium silicate glass-ceramics for CAD/CAM dental restorations: biocompatibility, mechanical and microstructural properties after crystallization.
    Journal of dentistry, 2022, Volume: 119

    Topics: Ceramics; Computer-Aided Design; Crystallization; Dental Porcelain; Humans; Lithium; Materials Testing; Silicates; Surface Properties; Zirconium

2022
Comparison of retention and fracture load of endocrowns made from zirconia and zirconium lithium silicate after aging: an in vitro study.
    BMC oral health, 2022, 02-16, Volume: 22, Issue:1

    Topics: Ceramics; Computer-Aided Design; Crowns; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Humans; Lithium; Materials Testing; Silicates; Zirconium

2022
Surface Treatment and Cementation of Lithium Silicate Ceramics Containing ZrO2.
    Operative dentistry, 2022, Mar-01, Volume: 47, Issue:2

    Topics: Cementation; Ceramics; Dental Bonding; Dental Porcelain; Hydrofluoric Acid; Lithium; Materials Testing; Resin Cements; Silanes; Silicates; Surface Properties; Zirconium

2022
Soft machining-induced surface and edge chipping damage in pre-crystalized lithium silicate glass ceramics.
    Journal of the mechanical behavior of biomedical materials, 2022, Volume: 131

    Topics: Ceramics; Computer-Aided Design; Dental Porcelain; Diamond; Lithium; Materials Testing; Silicates; Surface Properties; Zirconium

2022
Adhesion to a Zirconia-reinforced Lithium Silicate Ceramic: Effects of Ceramic Surface Treatments and Resin Cements.
    Operative dentistry, 2022, May-01, Volume: 47, Issue:3

    Topics: Ceramics; Dental Bonding; Dental Porcelain; Lithium; Materials Testing; Resin Cements; Silicates; Starch; Surface Properties; Zirconium

2022
Indirect repair of saliva-contaminated materials using veneering ceramics.
    Journal of prosthodontics : official journal of the American College of Prosthodontists, 2023, Volume: 32, Issue:5

    Topics: Air Abrasion, Dental; Alloys; Ceramics; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Lithium; Materials Testing; Saliva; Shear Strength; Surface Properties; Zirconium

2023
Effect of the thickness of CAD-CAM materials on the shear bond strength of light-polymerized resin cement.
    European journal of oral sciences, 2022, Volume: 130, Issue:5

    Topics: Aluminum Silicates; Ceramics; Computer-Aided Design; Dental Bonding; Dental Porcelain; Lithium; Materials Testing; Resin Cements; Shear Strength; Surface Properties; Zirconium

2022
Translucency, color stability, and biaxial flexural strength of advanced lithium disilicate ceramic after coffee thermocycling.
    Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.], 2023, Volume: 35, Issue:2

    Topics: Ceramics; Coffee; Color; Computer-Aided Design; Dental Porcelain; Flexural Strength; Humans; Lithium; Materials Testing; Silicates; Surface Properties; Zirconium

2023
Effects of Streptococcus mutans and their metabolites on the wear behavior of dental restorative materials.
    Journal of the mechanical behavior of biomedical materials, 2022, Volume: 135

    Topics: Ceramics; Composite Resins; Dental Materials; Dental Porcelain; Lactic Acid; Lithium; Materials Testing; Polymers; Silicates; Streptococcus mutans; Surface Properties; Zirconium

2022
Effect of surface treatments on bond durability of zirconia-reinforced lithium silicate ceramics: An in vitro study.
    The Journal of prosthetic dentistry, 2022, Volume: 128, Issue:6

    Topics: Ceramics; Dental Bonding; Dental Porcelain; Lithium; Materials Testing; Resin Cements; Silicates; Surface Properties; Zirconium

2022
Three-year clinical evaluation of zirconia and zirconia-reinforced lithium silicate crowns with minimally invasive vertical preparation technique.
    Clinical oral investigations, 2023, Volume: 27, Issue:4

    Topics: Ceramics; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Esthetics, Dental; Humans; Lithium; Materials Testing; Silicates; Zirconium

2023
An investigation on fatigue, fracture resistance, and color properties of aesthetic CAD/CAM monolithic ceramics.
    Clinical oral investigations, 2023, Volume: 27, Issue:6

    Topics: Ceramics; Color; Computer-Aided Design; Crowns; Dental Porcelain; Dental Stress Analysis; Esthetics, Dental; Humans; Lithium; Materials Testing; Reproducibility of Results; Silicates; Surface Properties; Zirconium

2023
Repair bond strength of different CAD-CAM ceramics after various surface treatments combined with laser irradiation.
    Lasers in medical science, 2023, Jan-23, Volume: 38, Issue:1

    Topics: Ceramics; Composite Resins; Computer-Aided Design; Dental Bonding; Dental Porcelain; Lasers; Lithium; Materials Testing; Resin Cements; Shear Strength; Surface Properties; Zirconium

2023
[Research on friction and wear behaviors of silicon-lithium spray coating on zirconia ceramics].
    Beijing da xue xue bao. Yi xue ban = Journal of Peking University. Health sciences, 2023, Feb-18, Volume: 55, Issue:1

    Topics: Ceramics; Cicatrix; Dental Porcelain; Friction; Humans; Lithium; Materials Testing; Silicon; Silicon Dioxide; Surface Properties; Zirconium

2023
Digital evaluation of the effect of nanosilica-lithium spray coating on the internal and marginal fit of high translucent zirconia crowns.
    Journal of dentistry, 2023, Volume: 132

    Topics: Computer-Aided Design; Crowns; Dental Marginal Adaptation; Dental Porcelain; Dental Prosthesis Design; Lithium; Zirconium

2023
Effect of staining layer on roughness after progressive wear of monolithic ceramics.
    Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.], 2023, Volume: 35, Issue:6

    Topics: Ceramics; Computer-Aided Design; Dental Porcelain; Dentists; Humans; Lithium; Materials Testing; Professional Role; Silicates; Surface Properties; Zirconium

2023
Effects of Surface Treatment and Thermocycling on the Shear Bond Strength of Zirconia-Reinforced Lithium Silicate Ceramic.
    The journal of adhesive dentistry, 2023, Jun-08, Volume: 25, Issue:1

    Topics: Ceramics; Dental Bonding; Dental Porcelain; Lithium; Materials Testing; Resin Cements; Shear Strength; Silanes; Silicates; Surface Properties; Water; Zirconium

2023