yttrium has been researched along with aluminum oxide in 195 studies
| Timeframe | Studies, this research(%) | All Research% |
|---|---|---|
| pre-1990 | 2 (1.03) | 18.7374 |
| 1990's | 17 (8.72) | 18.2507 |
| 2000's | 48 (24.62) | 29.6817 |
| 2010's | 117 (60.00) | 24.3611 |
| 2020's | 11 (5.64) | 2.80 |
| Authors | Studies |
|---|---|
| Bahns, TL; Bishara, SE; Strobl, K; Stwalley, WC; Willham, L | 1 |
| Baerveldt, G; Berns, MW; Hill, RA; Ozler, SA; Pickford, M; Profeta, GA | 1 |
| Maloney, RW | 1 |
| Gimpelson, RJ; Krewer, K; Shirk, GJ | 1 |
| Dickson, JB; Federman, JL; Flanagan, JC | 1 |
| Christel, P; Heller, M; Meunier, A; Peille, CN; Torre, JP | 1 |
| Anderson, RR; Farinelli, W; Flotte, TJ; Grevelink, JM; Grossman, MC | 1 |
| Escudero, ML; García-Alonso, C; González-Carrasco, JL; Ramírez, E | 1 |
| Ashinoff, R; Levine, VJ; McClain, SA; Tse, Y | 1 |
| Coles, C; Hartwig, P; Leaf-Davis, J; Mehregan, DA; Olson, S; Zarrin, AA; Zelickson, BD | 1 |
| Andersson, T; Arvidsson, D; Lindgren, PG; Löfberg, AM; Lörelius, LE; Nordlinder, H | 1 |
| Anderson, RR; DeCoste, SD; Duke, D; Gonzalez, E; Grevelink, JM; van Leeuwen, RL | 1 |
| Byers, HR; Dekker, SK; Grevelink, JM; van Leeuwen, RL; Vermeer, BJ | 1 |
| Berns, MW; Esterowitz, T; Garrett, J; Hill, RA; Kenney, M; Liaw, LH; Reddi, S; Ryan, J; Shimuzu, S; Shirk, J | 1 |
| Arndt, KA; Dover, JS; Goyal, S; O'Hare, D; Stern, RS | 1 |
| Bragdon, CR; Elder, JR; Harris, WH; Jasty, M; Kawate, K; Lowenstein, J; McGrory, BJ | 1 |
| De Lisa, A; Scarpa, M; Usaï, E | 1 |
| Bonoan, R; Gonzalez, E; González, S; Grevelink, JM; Vibhagool, C | 1 |
| Canahua, H; Escudero, ML; García-Alonso, MC; Ruiz, J | 1 |
| Chao, J; Escudero, ML; García-Alonso, MC; González-Carrasco, JL | 1 |
| Jung, YG; Kim, DK; Lawn, BR; Peterson, IM | 1 |
| del Valle, I; Escudero, ML; Fernández, L; Gómez-García, L; Martínez, ME; Martínez, P; Munuera, L; Rodrigo, AM; Ruíz, J; Saldaña, L | 1 |
| Hossain, M; Matsumoto, K; Murakami, Y; Nakamura, Y; Yamada, Y | 1 |
| Lou, J; Luo, Q; Mazur, E; Shen, N; Tong, L; Xu, Y | 1 |
| Cardoso, J; Fernandes, AC; Ferro Carvalho, A; Gonçalves, IC; Osvay, M; Santos, J; Santos, L | 1 |
| Bakueva, L; Musikhin, S; Sargent, EH | 1 |
| Bahadur, D; Dasgupta, S; Datta, D; Giri, J; Ray, A | 1 |
| Hussein, A; Kakaboura, A; Koutayas, SO; Strub, JR | 1 |
| Bornstein, E | 1 |
| Cardoso, J; Carvalho, AF; Fernandes, AC; Gonçalves, IC; Kling, A; Marques, JG; Osvay, M; Santos, JP; Santos, L | 1 |
| McMillan, PF; Wilding, MC; Wilson, M | 1 |
| Guo, XZ; Yang, H | 1 |
| Feng, Z; Guan, Y; Li, C; Li, Y; Liu, Y; Sun, K; Wu, W; Ying, P | 1 |
| Filser, F; Gauckler, LJ; Hammerle, CH; Loeffel, O; Lüthy, H; Schumacher, M | 1 |
| Iida, H; Kawanabe, K; Nakamura, T; Onishi, E; Shimizu, M; Tamura, J; Tanaka, K | 1 |
| Raigrodski, AJ | 1 |
| Curtis, AR; Fleming, GJ; Wright, AJ | 1 |
| Devigus, A; Lombardi, G | 1 |
| Deng, PZ; Ding, F; Gan, FX; Mao, YL; Wang, CS | 1 |
| Filser, F; Gauckler, LJ; Kocher, P; Lüthy, H; Studart, AR | 2 |
| Chan, SW; Dargusch, R; Raitano, J; Schubert, D | 1 |
| Ascencio, JA; Chávez-Carvayar, JA; González, G; Santoyo-Salazar, J; Schabes-Retchkiman, PS; Tartaj-Salvador, J | 1 |
| Atsuta, M; Tsuo, Y; Yoshida, K | 1 |
| Fischer, J; Stawarczyk, B | 1 |
| Bouhy, A; Moureau, T; Raepsaet, N; Vanheusden, A | 1 |
| Pinero, J | 1 |
| Denry, I; Kelly, JR | 1 |
| Sjögren, G; Sundh, A | 1 |
| Nijhuis, H; Ozcan, M; Valandro, LF | 1 |
| Arnetzl, G; Arnetzl, GV; Dornhofer, R; Koller, M | 1 |
| Amaral, R; Bottino, MC; Bressiani, AH; Lazar, DR; Ozcan, M; Ussui, V; Valandro, LF | 1 |
| Andreiotelli, M; Kohal, RJ | 1 |
| Beuer, F; Naumann, M; Sorensen, JA; Steff, B | 1 |
| Ban, S; Nawa, M; Pezzotti, G; Sato, H; Yamada, K | 1 |
| Fischer, J; Grohmann, P; Stawarczyk, B | 1 |
| Papadopoulos, TD; Spyropoulos, KD | 1 |
| Fischer, J; Hämmerle, CH; Stawarczyk, B; Trottmann, A | 1 |
| Arvidson, K; Haag, P; Karlsson, S; Messelt, EB; Mustafa, K; Wennerberg, A | 1 |
| Fischer, J; Hämmerle, CH; Stawarzcyk, B; Trottmann, A | 1 |
| Guess, P; Rekow, ED; Santana, T; Silva, NR; Thompson, VP; Zhang, Y | 1 |
| Swain, MV; Thiel, N; Tholey, MJ | 1 |
| Guo, TW; Jin, ZH; Liu, HC; Wang, L; Yang, LQ; Yang, SF | 1 |
| Cavalcanti, AN; Foxton, RM; Gianinni, M; Marchi, GM; Oliveira, MT; Pilecki, P; Watson, TF | 1 |
| Canale, A; Cortellini, D; Valenti, M | 1 |
| Ban, S; Izumi, Y; Machigashira, M; Miyamoto, M; Noguchi, K; Takeuchi, H; Yamashita, D | 1 |
| Brown, CT; Calvez, S; Dawson, MD; Fusari, F; Gupta, JA; Kisel, VE; Kuleshov, NV; Lagatsky, AA; Sibbett, W | 1 |
| Adams, JB; Berend, KR; Clarke, IC; Lombardi, AV; Seng, BE | 1 |
| Berthold, C; Swain, MV; Thiel, N; Tholey, MJ | 1 |
| Guess, PC; Kim, JW; Rekow, ED; Thompson, VP; Zhang, Y | 1 |
| Funduk, N; Jevnikar, P; Kocjan, A; Kosmac, T; Krnel, K | 1 |
| Fischer, J; Hämmerle, CH; Sailer, I; Stawarczyk, B | 1 |
| Bonfante, EA; Bonfante, G; Coelho, PG; Guess, PC; Lorenzoni, FC; Martins, LM; Silva, NR; Thompson, VP | 1 |
| Liu, Q; Pan, Y; Shi, Y; Zhang, K | 1 |
| Kern, M; Kocjan, A; Kosmac, T; Lehmann, F; Zhang, S | 1 |
| Begand, S; Fischer, H; Kirsten, A; Oberbach, T; Telle, R | 1 |
| Beuerman, RW; Khor, KA; Mehta, JS; Perera, AP; Tan, A; Tan, D; Tan, XW | 1 |
| Amez-Droz, M; Cattani Lorente, M; Demellayer, R; Richard, J; Scherrer, SS; Wiskott, HW | 1 |
| Ban, S; Minesaki, Y; Noda, M; Okuda, Y; Takenouchi, Y; Tsuruki, J | 1 |
| Cattani-Lorente, M; de Mestral, F; Griggs, JA; Scherrer, SS; Vittecoq, E; Wiskott, HW | 1 |
| Baba, S; Kulunk, S; Kulunk, T; Kurt, M; Ural, C | 1 |
| Jiang, L; Li, W; Liao, YM; Zhang, JC; Zhao, YQ | 1 |
| da Silva, EM; de Goes, MF; Maia, LC; Miragaya, L; Sabrosa, CE | 1 |
| Chen, TM; Huang, CH; Kuo, TW | 1 |
| Chai, J; Chow, TW; Chu, FC | 1 |
| Chen, X; Gao, J; Jiang, R; Kang, P; Li, K; Li, Y; Wang, B; Wang, J | 1 |
| Borba, M; Cesar, PF; de Araújo, MD; Della Bona, A; Fukushima, KA; Griggs, JA; Yoshimura, HN | 1 |
| Goto, D; Higuchi, D; Hotta, Y; Kuriyama, S; Manabe, A; Miyazaki, T; Terui, Y | 1 |
| Kawai, Y; Kono, S; Ohnuki, S; Uo, M; Wang, Y; Watari, F | 1 |
| Deguchi, M; Endo, T; Fujii, T; Ikemura, K; Kadoma, Y; Negoro, N; Tanaka, H | 1 |
| Haller, WK; Lawn, BR; Lloyd, IK; Saied, MA | 1 |
| Borba, M; Cesar, PF; de Araújo, MD; de Lima, E; Della Bona, A; Griggs, JA; Yoshimura, HN | 1 |
| Corcodel, N; Luthardt, RG; Moldovan, O; Rudolph, H | 1 |
| Mainjot, AK; Sadoun, MJ; Schajer, GS; Vanheusden, AJ | 1 |
| Li, Q; Li, W; Swain, MV; Zhang, Z; Zhou, S | 1 |
| Deng, QH; Liu, YH; Zhu, YH | 1 |
| Addison, O; Burke, FJ; Everson, P; Palin, WM | 1 |
| McLaren, EA; Polansky, JR; Sederstrom, D; Tan, JP; White, SN | 1 |
| Harding, AB; Norling, BK; Teixeira, EC | 1 |
| Li, J; Li, W; Liao, YM; Lu, JJ; Zhang, JC; Zhao, YQ | 1 |
| Hallmann, L; Hämmerle, CH; Reusser, E; Ulmer, P | 1 |
| Liang, X; Liao, Y; Teng, J; Wang, H | 1 |
| Bonfante, EA; Coelho, PG; Hanan, JC; Rafferty, BT; Rekow, ED; Silva, NR; Thompson, VP | 1 |
| Hamano, N; Ino, S; Okada, S; Teranaka, T; Yamaguchi, H | 1 |
| Hallmann, L; Hämmerle, CH; Ozcan, M; Roos, M; Stawarczyk, B; Trottmann, A | 1 |
| Fukada, M; Fukumura, T; Minegishi, K; Nagatsu, K; Suzuki, H; Tsuji, A | 1 |
| Sakurai, K; Takano, T; Tasaka, A; Yoshinari, M | 1 |
| Martínez-Rus, F; Pradíes, G; Rivera, B; Suárez, MJ | 1 |
| Fazi, G; Ferrari, M; Vichi, A | 1 |
| Esposito, L; Monaco, C; Scotti, R; Tucci, A | 1 |
| Chiriac, MT; Popescu, O; Radu, T; Simon, S; Simon, V | 1 |
| Kusano, K; Okazaki, M; Satoda, T; Shimoe, S; Tanoue, N | 1 |
| Kokubun, K; Saito, K; Sasaki, H; Watanabe, H; Yoshinari, M | 1 |
| Carvalho, RM; Coelho, PG; Janal, MN; Lorenzoni, FC; Silva, NR; Thompson, VP; Valverde, GB; Weltemann, KD | 1 |
| De Munck, J; Inokoshi, M; Kameyama, A; Minakuchi, S; Van Meerbeek, B | 1 |
| Honma, S; Ito, H; Saito, K; Sasaki, H; Yajima, Y; Yoshinari, M | 1 |
| Komada, W; Miura, H; Omori, S; Yoshida, K | 1 |
| Chevalier, J; Coelho, PG; Douillard, T; Hjerppe, J; Kohal, RJ; Sanon, C; Silva, NR | 1 |
| Homma, S; Iijima, T; Sasaki, H; Sekine, H; Yajima, Y; Yoshinari, M | 1 |
| Cekic-Nagas, I; Egilmez, F; Ergun, G; Lassila, LVJ; Ozcan, M; Vallittu, PK | 1 |
| Kelly, JR; Megremis, S; Rungruanganut, P; Spink, LS | 1 |
| Hasegawa, M; Sudo, A | 1 |
| Baldissara, P; Fonseca, RG; Monaco, C; Querzè, M; Scotti, R | 1 |
| Albaladejo, A; Ceballos, L; Fuentes, MV; García, A; Lorenzo, MC; Montero, J; Moreno, P; Portillo, M | 1 |
| Goller, G; Özcan, M; Sen, D; Tuncelli, B; Turp, V | 1 |
| Caputo, AA; McLaren, EA; Seto, KB; White, SN | 1 |
| Chakradhar, RP; Mohandas Bhat, S; Nagabhushana, BM; Nagabhushana, H; Premkumar, HB; Ravikumar, BS; Savitha, MB; Sharma, SC; Sunitha, DV | 1 |
| Elsaka, SE | 1 |
| Finkelman, MD; Schaus, SE; Talua, NA; Zandparsa, R | 1 |
| Miho, O; Nomoto, S; Okabayashi, S; Sato, T | 1 |
| Biswas, K; Dhara, S; Mandal, D; Pandey, AK; Pati, F | 1 |
| Lee, K; Lim, HP; Park, SW; Song, JY; Yun, KD | 1 |
| Baldissara, P; de Oliveira Abi-Rached, F; dos Santos Nunes Reis, JM; Garcia Fonseca, R; Rambaldi, E | 1 |
| Cesar, PF; Fukushima, KA; Mainjot, AK; Sadoun, MJ | 1 |
| Amaral, M; Belli, R; Cesar, PF; Lohbauer, U; Petschelt, A; Valandro, LF | 1 |
| Antoszyk, AN; Astratov, VN; Darafsheh, A; Fardad, A; Fried, NM; Hutchens, TC; Ying, HS | 1 |
| Arantes-Oliveira, S; Portugal, J; Seabra, B | 1 |
| Akar, GC; Çal, E; Eskitaşçıoğlu, G; Özcan, M; Pekkan, G | 1 |
| Burgess, JO; Givan, D; Karimipour-Saryazdi, M; Liu, PR; Ramp, LC; Sadid-Zadeh, R | 1 |
| Bayindir, H; Yilmaz, HG | 1 |
| Kern, M; Sasse, M | 1 |
| Cekic-Nagas, I; Egilmez, F; Ergun, G; Guru, M; Yilmaz, D | 1 |
| Bian, C; Kong, H; Wang, G; Zhang, S | 1 |
| Bollero, P; Gherlone, E; Perfetti, F; Sorrentino, R; Traini, T; Zarone, F | 1 |
| Akin, I; Cavalu, S; Goller, G; Ormanci, O; Sahin, F; Simon, V; Yucel, O | 1 |
| El-Korashy, DI; El-Refai, DA | 1 |
| Del Siena, F; Ferrari, M; Louca, C; Sedda, M; Vichi, A | 1 |
| Ahmadi, H; Ghasemi, A; Ghavam, M; Kermanshah, H; Nateghifard, A; Torabzadeh, H; Zolfagharnasab, K | 1 |
| Addison, O; Borges, AL; Costa, AK; Fleming, GJ | 1 |
| Abdoh Tabrizi, M; Ahmadi, H; Akhavan Zanjani, V; Alikhani, F; Ghasemi, A; Nateghifard, A; Razi, R; Torabzadeh, H | 1 |
| Abi-Rached, Fde O; da Silva, FS; Fonseca, RG; Henriques, BA; Pinelli, LA | 1 |
| Kocjan, A; Kosmač, T; Samodurova, A; Swain, MV | 1 |
| Bottino, MC; Nishigori, A; Platt, JA; Yoshida, T | 1 |
| Abi-Rached, FO; Campos, JA; Fonseca, RG; Martins, SB | 1 |
| Borchers, L; Bruns, M; Dellinger, P; Hübsch, C; Maier, HJ; Stemme, F; Stiesch, M | 1 |
| Abi-Rached, FO; Adabo, GL; Baldissara, P; Fonseca, RG; Sciasci, P | 1 |
| De Munck, J; Eliades, G; Inokoshi, M; Minakuchi, S; Naert, I; Van Meerbeek, B; Vanmeensel, K; Vleugels, J; Zhang, F | 1 |
| Borba, M; Cesar, PF; Della Bona, Á; Duan, Y; Griggs, JA | 1 |
| Aydın, C; Bankoğlu Güngör, M; Karakoca Nemli, S; Turhan Bal, B; Yılmaz, H | 1 |
| Amaral, M; Cesar, PF; May, LG; Otani, A; Valandro, LF | 1 |
| Frasca, LC; Lopes, R; Pimenta, MA; Rivaldo, E | 1 |
| Campos, F; Dal Piva, AM; Gondim, LD; Özcan, M; Pereira, Lde L; Souza, RO | 1 |
| Bielen, V; Inokoshi, M; Minakuchi, S; Munck, JD; Naert, I; Van Meerbeek, B; Vanmeensel, K; Vleugels, J; Zhang, F | 1 |
| Hasankhani, A; Matinlinna, JP; Mirmohammadi, H; Samimi, P | 1 |
| De Munck, J; Inokoshi, M; Minakuchi, S; Naert, I; Nagaoka, N; Nakanishi, M; Van Meerbeek, B; Vanmeensel, K; Vleugels, J; Yoshida, Y; Yoshihara, K; Zhang, F | 1 |
| Cui, B; Dong, S; Ma, D; Ren, N; Rittmann, BE; Tian, X; Xu, Z | 1 |
| Ganapathy, P; Manivasagam, G; Natarajan, A; Rajamanickam, A | 1 |
| Dubey, V; Kaur, J; Murthy, KVR; Parganiha, Y; Suryanarayana, NS | 1 |
| Bömicke, W; Krisam, J; Rammelsberg, P; Rues, S; Schürz, A | 1 |
| De Munck, J; Inokoshi, M; Minakuchi, S; Naert, I; Pongprueksa, P; Van Meerbeek, B; Vanmeensel, K; Vleugels, J; Zhang, F | 1 |
| Jiazhen, Y; Ning, L; Qiang, Z; Wenbo, L; Yanan, Z | 1 |
| Aminian, A; Azizi, Z; Hildebrand, N; Maas, M; Maedler, K; Rezwan, K; Shirzadi, B; Treccani, L; Volkmann, E | 1 |
| Aivazi, M; HashemiBeni, B; Hossein Fathi, M; Matinlinna, JP; Mortazavi, V; Nejatidanesh, F; Savabi, O | 1 |
| Aziz, A; Carrabba, M; Fabian Fonzar, R; Ferrari, M; Keeling, AJ; Vichi, A; Wood, D | 1 |
| Edwards Rezende, CE; Griggs, JA; Macedo, RM; Rubo, JH; Sanches Borges, AF | 1 |
| Chaofang, D; Helin, X; Jinshuang, W; Lei, Z; Sefei, Y; Zhe, W | 1 |
| Abi-Rached, FO; Adabo, GL; Baldissara, P; Fonseca, RG; Martins, SB | 1 |
| Aslan, YU; Ates, SM; Boztoprak, Y; Caglar, I; Duymus, ZY | 1 |
| Campos, F; de Jager, N; Fraga, S; Kleverlaan, CJ; Valandro, LF | 1 |
| Fujiwara, A; Gu, H; Marin, E; Nakashima, S; Nishiike, N; Pezzotti, G; Sugano, N; Zhu, W | 1 |
| Noel, OF; Roy, ME; Whiteside, LA | 1 |
| Cordeiro, WJB; Fonseca, EM; Martins, FV; Mattos, CT | 1 |
| Harai, T; Hayakawa, T; Hirota, M; Ishibashi, S; Mizutani, M | 1 |
| Cadore-Rodrigues, AC; Foletto, EL; Jahn, SL; Oliveira, JS; Pereira, GKR; Prochnow, C; Rippe, MP; Valandro, LF | 1 |
| Hu, Y; Li, J; Liu, B; Lv, XS; Wang, XP; Wei, L; Yang, YG; Yu, HJ; Zhang, HD; Zhang, YY | 1 |
| Aguiar, FHB; Barreto, SC; de Souza, GMD; Lima, RBW; Paulillo, LAMS; Santos, CTD | 1 |
| Benalcázar Jalkh, EB; Bergamo, ETP; Bonfante, EA; Bortolin, F; Cesar, PF; Coelho, PG; Genova, LA; Lisboa Filho, PN; Lopes, ACO; Monteiro, KN; Piza, MMT; Santos, CF | 1 |
| Burgo, TAL; Cadore-Rodrigues, AC; Foletto, EL; Jahn, SL; Oliveira, JS; Pereira, GKR; Prochnow, C; Rippe, MP; Valandro, LF | 1 |
| Benalcazar Jalkh, EB; Bergamo, ETP; Bonfante, EA; Borges, AFS; Campos, TMB; Cesar, PF; Coelho, PG; Genova, LA; Lima, E; Lisboa-Filho, PN; Lopes, ACO; Monteiro, KN; Witek, L | 1 |
| Chen, B; Chen, C; Meng, H; Xie, H; Yan, Y; Zhang, H | 1 |
| Cadore-Rodrigues, AC; Dorneles, LS; Jahn, SL; Machado, PS; Oliveira, JS; Pereira, GKR; Rippe, MP; Valandro, LF | 1 |
| Abreu, JLB; Benalcázar Jalkh, EB; Bergamo, ETP; Bonfante, EA; Campos, TMB; Canteenwala, A; Cesar, PF; Coelho, PG; Genova, LA; Lisboa-Filho, PN; Lopes, ACO; Monteiro, KN; Witek, L | 1 |
| Kantiranis, N; Koidis, P; Kontonasaki, E; Papadopoulou, L; Sarafidou, K; Siarampi, E | 1 |
| Bastos-Bitencourt, NA; Bitencourt, SB; De Souza, GM; Dos Santos, DM; Hatton, BD; Pesqueira, AA | 1 |
| Benalcázar Jalkh, EB; Bergamo, ETP; Bonfante, EA; Campos, TMB; Coelho, PG; de Araújo-Júnior, ENS; Genova, LA; Gierthmuehlen, PC; Lopes, ACO; Tebcherani, SM; Witek, L; Yamaguchi, S | 1 |
5 review(s) available for yttrium and aluminum oxide
| Article | Year |
|---|---|
Contact neodymium:YAG laser. Experimental studies and oculoplastic applications.
Topics: Aluminum Oxide; Aluminum Silicates; Animals; Equipment Design; Humans; Laser Therapy; Neodymium; Ophthalmologic Surgical Procedures; Surgical Instruments; Yttrium | 1989 |
[Ureteroscopic lithotripsy using the laser].
Topics: Aluminum Oxide; Aluminum Silicates; Beryllium; Equipment Design; Holmium; Humans; Italy; Lasers; Lithotripsy, Laser; Ureteral Calculi; Ureteroscopy; Yttrium | 1997 |
All-ceramic full-coverage restorations: concepts and guidelines for material selection.
Topics: Aluminum Oxide; Aluminum Silicates; Ceramics; Dental Cavity Preparation; Dental Porcelain; Dental Restoration, Permanent; Humans; Lithium; Magnesium Oxide; Yttrium; Zirconium | 2005 |
State of the art of zirconia for dental applications.
Topics: Aluminum Oxide; Crystallization; Dental Porcelain; Dental Prosthesis; Dental Stress Analysis; Glass; Humans; Magnesium Oxide; Materials Testing; Metal Ceramic Alloys; Oxides; Surface Properties; Yttrium; Zirconium | 2008 |
Evaluation of zirconia surface roughness after aluminum oxide airborne-particle abrasion and the erbium-YAG, neodymium-doped YAG, or CO
Topics: Aluminum; Aluminum Oxide; Carbon Dioxide; Erbium; Lasers, Solid-State; Materials Testing; Neodymium; Surface Properties; Yttrium; Zirconium | 2019 |
17 trial(s) available for yttrium and aluminum oxide
| Article | Year |
|---|---|
Treatment of cafe au lait macules with lasers. A clinicopathologic correlation.
Topics: Adult; Aluminum Oxide; Aluminum Silicates; Biopsy; Cafe-au-Lait Spots; Cell Count; Coloring Agents; Follow-Up Studies; Forecasting; Humans; Hyperpigmentation; Laser Therapy; Melanocytes; Neodymium; Recurrence; Treatment Outcome; Yttrium | 1995 |
Laser treatment of tattoos: a prospective, paired, comparison study of the Q-switched Nd:YAG (1064 nm), frequency-doubled Q-switched Nd:YAG (532 nm), and Q-switched ruby lasers.
Topics: Adult; Aluminum Oxide; Aluminum Silicates; Atrophy; Equipment Design; Female; Follow-Up Studies; Humans; Hyperpigmentation; Hypertrophy; Hypopigmentation; Laser Therapy; Lasers; Male; Middle Aged; Neodymium; Pain; Prospective Studies; Skin; Tattooing; Yttrium | 1997 |
Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging.
Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Dental Bonding; Dental Cements; Dental Porcelain; Humans; Materials Testing; Methacrylates; Organophosphorus Compounds; Resin Cements; Shear Strength; Silanes; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Yttrium; Zirconium | 2008 |
Delta ceramic-on-alumina ceramic articulation in primary THA: prospective, randomized FDA-IDE study and retrieval analysis.
Topics: Adult; Aged; Aluminum Oxide; Arthroplasty, Replacement, Hip; Female; Hip Joint; Hip Prosthesis; Humans; Male; Middle Aged; Osteolysis; Polyethylene; Prospective Studies; Prosthesis Design; Prosthesis Failure; Radiography; Recovery of Function; Reoperation; Stress, Mechanical; Time Factors; Treatment Outcome; United States; Yttrium; Zirconium | 2010 |
Evaluation of self-adhesive resin cement bond strength to yttria-stabilized zirconia ceramic (Y-TZP) using four surface treatments.
Topics: Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Coated Materials, Biocompatible; Dental Bonding; Dental Cements; Dental Etching; Dental Porcelain; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Shear Strength; Silanes; Spectrometry, X-Ray Emission; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Water; Yttrium; Zirconium | 2011 |
Effect of surface treatment on shear bond strength of zirconia to human dentin.
Topics: Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Cementation; Dental Bonding; Dental Cements; Dental Etching; Dental Porcelain; Dental Stress Analysis; Dentin; Dentin-Bonding Agents; Humans; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Silanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2011 |
Three-dimensional fit of CAD/CAM-made zirconia copings.
Topics: Aluminum Oxide; Bicuspid; Computer-Aided Design; Crowns; Dental Cements; Dental Marginal Adaptation; Dental Porcelain; Dental Prosthesis Design; Humans; Image Processing, Computer-Assisted; Imaging, Three-Dimensional; Materials Testing; Models, Dental; Molar; Photography; Replica Techniques; Silicones; Surface Properties; Tooth Preparation; User-Computer Interface; Yttrium; Zirconium | 2011 |
Improved bonding of zirconia substructures to resin using a "glaze-on" technique.
Topics: Acid Etching, Dental; Aluminum Oxide; Carbon Compounds, Inorganic; Coated Materials, Biocompatible; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Porcelain; Dental Stress Analysis; Glass; Hot Temperature; Humans; Hydrofluoric Acid; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Water; Yttrium; Zirconium | 2012 |
The use of slow heating and slow cooling regimens to strengthen porcelain fused to zirconia.
Topics: Aluminum Oxide; Aluminum Silicates; Cold Temperature; Dental Bonding; Dental Materials; Dental Porcelain; Dental Stress Analysis; Elastic Modulus; Hot Temperature; Humans; Materials Testing; Pliability; Potassium Compounds; Stress, Mechanical; Surface Properties; Tensile Strength; Time Factors; Yttrium; Zirconium | 2012 |
The effect of surface treatment of the interfacial surface on fatigue-related microtensile bond strength of milled zirconia to veneering porcelain.
Topics: Aluminum Oxide; Apatites; Butylene Glycols; Ceramics; Dental Bonding; Dental Etching; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Water; Yttrium; Zirconium | 2012 |
Fatigue strength of Ce-TZP/Al2O3 nanocomposite with different surfaces.
Topics: Acid Etching, Dental; Aluminum Oxide; Biocompatible Materials; Cerium; Composite Resins; Dental Etching; Dental Materials; Dental Polishing; Dental Stress Analysis; Humans; Hydrofluoric Acid; Materials Testing; Nanocomposites; Pliability; Stress, Mechanical; Surface Properties; Temperature; Water; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
Microstructural changes produced by abrading Y-TZP in presintered and sintered conditions.
Topics: Algorithms; Aluminum Oxide; Carbon Compounds, Inorganic; Ceramics; Chemical Phenomena; Crystallography; Dental Etching; Dental Materials; Hardness; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Porosity; Silicon Compounds; Silicon Dioxide; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Surface characterisation and bonding of Y-TZP following non-thermal plasma treatment.
Topics: Adhesiveness; Aluminum Oxide; Argon; Carbon; Carbon Compounds, Inorganic; Cementation; Ceramics; Coated Materials, Biocompatible; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Humans; Interferometry; Materials Testing; Methacrylates; Oxygen; Photoelectron Spectroscopy; Plasma Gases; Resin Cements; Silicon Compounds; Silicon Dioxide; Stress, Mechanical; Surface Properties; Surface Tension; Tensile Strength; Wettability; Yttrium; Zirconium | 2013 |
Durable bonding to mechanically and/or chemically pre-treated dental zirconia.
Topics: Adhesiveness; Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Cements; Dental Etching; Dental Porcelain; Humans; Hydrophobic and Hydrophilic Interactions; Methacrylates; Microscopy, Electron, Scanning; Resin Cements; Silanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Water; Yttrium; Zirconium | 2013 |
Influence of surface treatment of yttria-stabilized tetragonal zirconia polycrystal with hot isostatic pressing on cyclic fatigue strength.
Topics: Acid Etching, Dental; Aluminum Oxide; Crystallography; Dental Etching; Dental Materials; Dental Polishing; Dental Stress Analysis; Hot Temperature; Humans; Hydrofluoric Acid; Materials Testing; Microscopy, Electron, Scanning; Phase Transition; Pliability; Pressure; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2013 |
Efficacy of surface treatments on the bond strength of resin cements to two brands of zirconia ceramic.
Topics: Adhesiveness; Aluminum Oxide; Aluminum Silicates; Composite Resins; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Glass; Humans; Humidity; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2013 |
Clinical and scanning electron microscopy evaluation of the Er,Cr:YSGG laser therapy for treating dentine hypersensitivity: short-term, randomised, controlled study.
Topics: Adolescent; Adult; Aluminum Oxide; Dentin Sensitivity; Erbium; Female; Humans; Lasers, Solid-State; Low-Level Light Therapy; Male; Microscopy, Electron, Scanning; Middle Aged; Pain Measurement; Patient Satisfaction; Surface Properties; Treatment Outcome; Yttrium | 2014 |
173 other study(ies) available for yttrium and aluminum oxide
| Article | Year |
|---|---|
Laser-aided debonding of orthodontic ceramic brackets.
Topics: Acrylic Resins; Aluminum Oxide; Aluminum Silicates; Bisphenol A-Glycidyl Methacrylate; Carbon Dioxide; Ceramics; Composite Resins; Dental Bonding; Dental Debonding; Dental Enamel; Equipment Failure; Hot Temperature; Humans; Lasers; Neodymium; Orthodontic Brackets; Stress, Mechanical; Thermal Conductivity; Time Factors; Yttrium | 1992 |
Laser trabecular ablation (LTA).
Topics: Aluminum Oxide; Aluminum Silicates; Erbium; Fiber Optic Technology; Holmium; Humans; Laser Therapy; Microscopy, Electron, Scanning; Optical Fibers; Pilot Projects; Silicon Dioxide; Trabecular Meshwork; Trabeculectomy; Yttrium; Zirconium | 1991 |
Contact Nd:YAG tonsillectomy: effects on weight loss and recovery.
Topics: Activities of Daily Living; Aluminum Oxide; Aluminum Silicates; Blood Loss, Surgical; Dissection; Eating; Electrocoagulation; Equipment Design; Humans; Laser Therapy; Neodymium; Prospective Studies; Tonsillectomy; Weight Gain; Weight Loss; Yttrium | 1991 |
Comparison of tissue effects with sculptured fiberoptic cables and other Nd:YAG laser and argon laser treatments.
Topics: Abdominal Muscles; Aluminum Oxide; Aluminum Silicates; Animals; Argon; Equipment Design; Fiber Optic Technology; Hot Temperature; Laparotomy; Lasers; Light Coagulation; Neodymium; Optical Fibers; Peritoneum; Rats; Rats, Inbred Strains; Surface Properties; Time Factors; Wound Healing; Yttrium | 1991 |
Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia.
Topics: Aluminum Oxide; Animals; Biocompatible Materials; Ceramics; Connective Tissue; Elasticity; Inflammation; Macrophages; Prostheses and Implants; Rats; Rats, Inbred Strains; Sterilization; Surface Properties; Time Factors; Yttrium; Zirconium | 1989 |
Electrochemical impedance spectroscopy of preoxidized MA 956 superalloy during in vitro experiments.
Topics: Alloys; Aluminum; Aluminum Oxide; Biocompatible Materials; Chromium; Electric Impedance; Electrochemistry; Heating; Iron; Oxidation-Reduction; Spectrum Analysis; Titanium; Yttrium | 1995 |
The removal of cutaneous pigmented lesions with the Q-switched ruby laser and the Q-switched neodymium: yttrium-aluminum-garnet laser. A comparative study.
Topics: Adult; Aluminum Oxide; Aluminum Silicates; Female; Follow-Up Studies; Humans; Hyperpigmentation; Laser Coagulation; Lasers; Lentigo; Male; Melanosis; Neodymium; Nevus of Ota; Nevus, Pigmented; Pain, Postoperative; Patient Satisfaction; Pigmentation Disorders; Prospective Studies; Skin Neoplasms; Yttrium | 1994 |
Clinical, histologic, and ultrastructural evaluation of tattoos treated with three laser systems.
Topics: Aluminum Oxide; Aluminum Silicates; Animals; Beryllium; Cytoplasmic Granules; Epidermis; Fibroblasts; Guinea Pigs; Laser Therapy; Macrophages; Microscopy, Electron; Neodymium; Organelles; Pigments, Biological; Skin; Tattooing; Yttrium | 1994 |
Ultrasound monitored laser-induced local hyperthermia in the liver. An experimental study on pigs.
Topics: Aluminum Oxide; Aluminum Silicates; Animals; Female; Hot Temperature; Hyperthermia, Induced; Laser Coagulation; Liver; Male; Necrosis; Neodymium; Swine; Ultrasonography; Yttrium | 1994 |
Laser treatment of tattoos in darkly pigmented patients: efficacy and side effects.
Topics: Adult; Aluminum Oxide; Aluminum Silicates; Black People; Cicatrix; Ethiopia; Female; Follow-Up Studies; Humans; Incidence; Keloid; Laser Therapy; Lasers; Neodymium; Pigmentation Disorders; Risk Factors; Skin Pigmentation; Tattooing; Treatment Outcome; Yttrium | 1996 |
Modulation of alpha 4 beta 1 and alpha 5 beta 1 integrin expression: heterogeneous effects of Q-switched ruby, Nd:YAG, and alexandrite lasers on melanoma cells in vitro.
Topics: Aluminum Oxide; Aluminum Silicates; Beryllium; Cell Adhesion; Cell Movement; Down-Regulation; Fibronectins; Flow Cytometry; Gene Expression Regulation, Neoplastic; Humans; Integrin alpha4beta1; Integrins; Lasers; Melanoma; Neodymium; Receptors, Fibronectin; Receptors, Lymphocyte Homing; Receptors, Very Late Antigen; Tumor Cells, Cultured; Up-Regulation; Yttrium | 1996 |
Photodynamic therapy (PDT) of the ciliary body with silicon naphthalocyanine (SINc) in rabbits.
Topics: Aluminum Oxide; Aluminum Silicates; Animals; Ciliary Body; Edema; Fiber Optic Technology; Image Processing, Computer-Assisted; Infarction; Iridocyclitis; Iris; Laser Coagulation; Metalloporphyrins; Microscopy, Fluorescence; Neodymium; Organosilicon Compounds; Photochemotherapy; Photosensitizing Agents; Rabbits; Thrombosis; Titanium; Uveal Diseases; Yttrium | 1996 |
Wear of retrieved cemented polyethylene acetabula with alumina femoral heads.
Topics: Acetabulum; Aluminum Oxide; Cementation; Ceramics; Female; Femur Head; Hip Prosthesis; Humans; Male; Microscopy, Electron, Scanning; Middle Aged; Polyethylenes; Prosthesis Failure; Prosthesis-Related Infections; Reoperation; Yttrium | 1997 |
Treatment of nevus spilus with the Q-switched ruby laser.
Topics: Adolescent; Adult; Aluminum Oxide; Aluminum Silicates; Cohort Studies; Female; Follow-Up Studies; Humans; Hyperpigmentation; Laser Coagulation; Male; Neodymium; Nevus, Pigmented; Remission Induction; Skin Neoplasms; Yttrium | 1997 |
Optimal conditions for alumina coating formation on the MA956 superalloy for prosthetic bearing applications.
Topics: Alloys; Aluminum; Aluminum Oxide; Chromium; Coated Materials, Biocompatible; Corrosion; Electron Probe Microanalysis; Iron; Microscopy, Electron, Scanning; Surface Properties; Temperature; Time Factors; Titanium; X-Ray Diffraction; Yttrium | 1999 |
Effect of substrate roughness on the corrosion behaviour of the Al2O3/MA 956 system.
Topics: Alloys; Aluminum; Aluminum Oxide; Biocompatible Materials; Chromium; Coated Materials, Biocompatible; Corrosion; Electric Conductivity; Electric Impedance; Hot Temperature; Iron; Microscopy, Electron, Scanning; Oxidation-Reduction; Surface Properties; Titanium; Yttrium | 2000 |
Lifetime-limiting strength degradation from contact fatigue in dental ceramics.
Topics: Aluminum Oxide; Aluminum Silicates; Bite Force; Ceramics; Crystallization; Dental Porcelain; Dental Restoration Wear; Dental Stress Analysis; Glass; Humans; Materials Testing; Potassium Compounds; Stress, Mechanical; Surface Properties; Time Factors; Water; Yttrium; Zirconium | 2000 |
Effects of MA 956 superalloy and alpha-alumina particles on some markers of human osteoblastic cells in primary culture.
Topics: Aged; Alkaline Phosphatase; Alloys; Aluminum; Aluminum Oxide; Biocompatible Materials; Cells, Cultured; Ceramics; Chromium; Culture Media, Conditioned; Humans; Iron; Materials Testing; Osteoblasts; Osteocalcin; Particle Size; Procollagen; Titanium; Yttrium | 2001 |
Microleakage of composite resin restoration in cavities prepared by Er,Cr:YSGG laser irradiation and etched bur cavities in primary teeth.
Topics: Acid Etching, Dental; Aluminum Oxide; Chromium; Composite Resins; Dental Cavity Preparation; Dental Enamel; Dental High-Speed Equipment; Dental Leakage; Dental Polishing; Dental Restoration, Permanent; Dentin; Dentin-Bonding Agents; Erbium; Fluorescent Dyes; Humans; Laser Therapy; Materials Testing; Microscopy, Electron, Scanning; Phosphoric Acids; Resin Cements; Rhodamines; Single-Blind Method; Statistics, Nonparametric; Tooth, Deciduous; Yttrium | 2002 |
Highly Nd3+-doped Y3Al5O12 crystal fiber tip for laser thermotherapy.
Topics: Aluminum Oxide; Animals; Egg White; Fiber Optic Technology; Humans; Hyperthermia, Induced; Laser Therapy; Liver; Neodymium; Swine; Temperature; Yttrium | 2002 |
Reproducibility of TL measurements in a mixed field of thermal neutrons and photons.
Topics: Aluminum Oxide; Calibration; Cobalt Radioisotopes; Copper; Fluorides; Lithium Compounds; Magnesium; Neutrons; Phosphorus; Photons; Reproducibility of Results; Thermodynamics; Thermoluminescent Dosimetry; Titanium; Yttrium | 2002 |
Time-resolved luminescence in conducting polymer/antidot nanocomposites.
Topics: Aluminum Oxide; Antimony; Crystallization; Luminescence; Macromolecular Substances; Materials Testing; Nanotechnology; Oxides; Polymers; Polyvinyls; Spectrometry, Fluorescence; Spectrum Analysis; Tin Compounds; Yttrium; Zinc Oxide | 2001 |
Investigation on Tc tuned nano particles of magnetic oxides for hyperthermia applications.
Topics: Aluminum Oxide; Cell Survival; Cells, Cultured; Coated Materials, Biocompatible; Ferrous Compounds; Hypothermia, Induced; Leukocytes; Magnetics; Materials Testing; Nanotechnology; Nanotubes; Oxides; Particle Size; Temperature; Yttrium | 2003 |
Colorimetric evaluation of the influence of five different restorative materials on the color of veneered densely sintered alumina.
Topics: Aluminum Oxide; Analysis of Variance; Color; Colorimetry; Dental Alloys; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Veneers; Glass; Gold Alloys; Humans; Materials Testing; Metal Ceramic Alloys; Resin Cements; Titanium; Yttrium; Zirconium | 2003 |
Proper use of Er:YAG lasers and contact sapphire tips when cutting teeth and bone: scientific principles and clinical application.
Topics: Absorption; Aluminum Oxide; Aluminum Silicates; Equipment Design; Erbium; Hot Temperature; Humans; Hydrogen Bonding; Laser Therapy; Lasers; Orthognathic Surgical Procedures; Photobiology; Quantum Theory; Tooth; Water; Yttrium | 2004 |
Thermoluminescence dosimetry of a thermal neutron field and comparison with Monte Carlo calculations.
Topics: Aluminum Oxide; Computer Simulation; Copper; Dose-Response Relationship, Radiation; Fluorides; Hot Temperature; Lithium Compounds; Magnesium; Models, Theoretical; Monte Carlo Method; Neutrons; Nuclear Reactors; Phosphorus; Photons; Sensitivity and Specificity; Thermoluminescent Dosimetry; Titanium; Yttrium | 2004 |
X-ray and neutron diffraction studies and MD simulation of atomic configurations in polyamorphic Y2O3-Al2O3 systems.
Topics: Aluminum Oxide; Computer Simulation; Macromolecular Substances; Models, Chemical; Models, Molecular; Molecular Conformation; Neutron Diffraction; X-Ray Diffraction; Yttrium | 2005 |
Sintering and microstructure of silicon carbide ceramic with Y3Al5O12 added by sol-gel method.
Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Ceramics; Crystallization; Gels; Hot Temperature; Molecular Conformation; Phase Transition; Silicon Compounds; Surface Properties; Yttrium | 2005 |
Dibenzodioxin adsorption on inorganic materials.
Topics: Adsorption; Aluminum Oxide; Aluminum Silicates; Dioxins; Hydrogen Bonding; Metals; Particle Size; Porosity; Silicon Dioxide; Sodium; Spectroscopy, Fourier Transform Infrared; Temperature; Titanium; Yttrium; Zeolites | 2005 |
Strength and reliability of four-unit all-ceramic posterior bridges.
Topics: Aluminum Oxide; Ceramics; Dental Porcelain; Dental Restoration Failure; Denture Design; Denture, Partial, Fixed; Glass; Humans; Lithium Compounds; Materials Testing; Microscopy, Electron, Scanning; Reproducibility of Results; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2005 |
Effect of alumina femoral head on clinical results in cemented total hip arthroplasty: old versus current alumina.
Topics: Adult; Aluminum Oxide; Arthroplasty, Replacement, Hip; Female; Hip Prosthesis; Humans; Male; Middle Aged; Prosthesis Design; Prosthesis Failure; Retrospective Studies; Yttrium | 2005 |
The influence of surface modification techniques on the performance of a Y-TZP dental ceramic.
Topics: Air Abrasion, Dental; Aluminum Oxide; Dental Materials; Hardness; Hardness Tests; Materials Testing; Pliability; Stress, Mechanical; Surface Properties; Tensile Strength; Weight-Bearing; Yttrium; Zirconium | 2006 |
Shading Vita In-ceram YZ substructures: influence on value and chroma, part II.
Topics: Aluminum Oxide; Color; Colorimetry; Crowns; Dental Porcelain; Dental Veneers; Female; Humans; Magnesium Oxide; Prosthesis Coloring; Technology, Dental; Yttrium; Zirconium | 2004 |
[Cooperative luminescence in Yb:YAG crystals].
Topics: Aluminum Oxide; Crystallization; Energy Transfer; Erbium; Holmium; Luminescence; Luminescent Measurements; Nanostructures; Spectrophotometry, Infrared; Spectroscopy, Near-Infrared; Ytterbium; Yttrium | 2005 |
Mechanical and fracture behavior of veneer-framework composites for all-ceramic dental bridges.
Topics: Aluminum Oxide; Aluminum Silicates; Ceramics; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Veneers; Denture, Partial; Elasticity; Humans; Lithium Compounds; Materials Testing; Pliability; Potassium Compounds; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Yttrium; Zirconium | 2007 |
Cerium and yttrium oxide nanoparticles are neuroprotective.
Topics: Aluminum Oxide; Antioxidants; Cell Line, Tumor; Cell Survival; Cerium; Humans; Nanomedicine; Nanostructures; Neurons; Neuroprotective Agents; Oxidative Stress; Yttrium | 2006 |
Cyclic fatigue in water of veneer-framework composites for all-ceramic dental bridges.
Topics: Aluminum Oxide; Aluminum Silicates; Apatites; Ceramics; Dental Materials; Dental Porcelain; Dental Veneers; Denture Design; Denture, Partial; Elasticity; Humans; Lithium Compounds; Materials Testing; Pliability; Potassium Compounds; Stress, Mechanical; Surface Properties; Water; Yttrium; Zirconium | 2007 |
Synthesis and characterisation of YSZ-Al2O3 nanostructured materials.
Topics: Aluminum Oxide; Crystallization; Dental Porcelain; Macromolecular Substances; Materials Testing; Molecular Conformation; Nanostructures; Nanotechnology; Particle Size; Surface Properties; Yttrium; Zirconium | 2006 |
Effects of alumina-blasting and adhesive primers on bonding between resin luting agent and zirconia ceramics.
Topics: Aluminum Oxide; Analysis of Variance; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Materials Testing; Methacrylates; Organophosphorus Compounds; Resin Cements; Shear Strength; Surface Properties; Tricarboxylic Acids; Yttrium; Zirconium | 2006 |
Compatibility of machined Ce-TZP/Al2O3 nanocomposite and a veneering ceramic.
Topics: Aluminum Oxide; Cerium; Crowns; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Materials Testing; Nanocomposites; Pliability; Shear Strength; Survival Analysis; Tensile Strength; Yttrium; Zirconium | 2007 |
[The classification of ceramics according to its chemical nature and its method of production].
Topics: Aluminum Oxide; Aluminum Silicates; Biomimetic Materials; Ceramics; Computer-Aided Design; Dental Porcelain; Dental Prosthesis Design; Glass; Hot Temperature; Humans; Lithium Compounds; Magnesium Oxide; Metal Ceramic Alloys; Phase Transition; Potassium Compounds; Titanium; Yttrium; Zirconium | 2006 |
Zirconium CAD/CAM and bioesthetic layering of porcelain: color from within.
Topics: Aluminum Oxide; Ceramics; Color; Computer-Aided Design; Crowns; Dental Materials; Dental Occlusion; Dental Porcelain; Dental Prosthesis Design; Esthetics, Dental; Gingivectomy; Humans; Male; Maxilla; Optics and Photonics; Patient Satisfaction; Surface Properties; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2007 |
A study of the bending resistance of implant-supported reinforced alumina and machined zirconia abutments and copies.
Topics: Aluminum Oxide; Ceramics; Computer-Aided Design; Crowns; Dental Abutments; Dental Bonding; Dental Implants; Dental Porcelain; Dental Prosthesis, Implant-Supported; Hot Temperature; Humans; Magnesium Oxide; Materials Testing; Pliability; Resin Cements; Stainless Steel; Stress, Mechanical; Titanium; Yttrium; Zirconium | 2008 |
Comparison of the static loading capacity of all-ceramic bridge frameworks in posterior teeth using three hard core materials.
Topics: Aluminum Oxide; Computer-Aided Design; Dental Abutments; Dental Porcelain; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Elasticity; Humans; Yttrium; Zirconium | 2007 |
Y-TZP ceramic processing from coprecipitated powders: a comparative study with three commercial dental ceramics.
Topics: Aluminum Oxide; Chemical Precipitation; Dental Porcelain; Dental Stress Analysis; Hardness; Materials Testing; Powders; Stress, Mechanical; Yttrium; Zirconium | 2008 |
Fracture strength of zirconia implants after artificial aging.
Topics: Aluminum Oxide; Bite Force; Ceramics; Crowns; Dental Cements; Dental Etching; Dental Implants; Dental Materials; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Phosphates; Resin Cements; Silanes; Stress, Mechanical; Surface Properties; Temperature; Titanium; Yttrium; Zirconium | 2009 |
Load-bearing capacity of all-ceramic three-unit fixed partial dentures with different computer-aided design (CAD)/computer-aided manufacturing (CAM) fabricated framework materials.
Topics: Aluminum Oxide; Computer-Aided Design; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Hot Temperature; Mandible; Materials Testing; Survival Analysis; Time Factors; Yttrium; Zirconium | 2008 |
Mechanical properties of dental zirconia ceramics changed with sandblasting and heat treatment.
Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Ceramics; Cerium; Dental Etching; Dental Materials; Hot Temperature; Humans; Materials Testing; Mechanics; Microscopy, Electron, Scanning; Nanocomposites; Phase Transition; Pliability; Silicon Compounds; Spectrum Analysis, Raman; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2008 |
Effect of zirconia surface treatments on the shear strength of zirconia/veneering ceramic composites.
Topics: Aluminum Oxide; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Veneers; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Shear Strength; Silicon Dioxide; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2008 |
The effect of a ceramic coating on the cpTi-porcelain bond strength.
Topics: Adhesiveness; Aluminum Oxide; Ceramics; Coated Materials, Biocompatible; Dental Bonding; Dental Casting Investment; Dental Etching; Dental Materials; Dental Porcelain; Elastic Modulus; Electron Probe Microanalysis; Humans; Magnesium Oxide; Materials Testing; Metal Ceramic Alloys; Microscopy, Electron, Scanning; Pliability; Stress, Mechanical; Surface Properties; Titanium; Yttrium; Zirconium | 2009 |
Impact of thermal properties of veneering ceramics on the fracture load of layered Ce-TZP/A nanocomposite frameworks.
Topics: Aluminum Oxide; Ceramics; Cerium; Crowns; Dental Materials; Dental Porcelain; Dental Veneers; Glass; Humans; Materials Testing; Metal Ceramic Alloys; Nanocomposites; Shear Strength; Stress, Mechanical; Temperature; Thermodynamics; Transition Temperature; Yttrium; Zirconium | 2009 |
Influence of modifying and veneering the surface of ceramic abutments on cellular attachment and proliferation.
Topics: Aluminum Oxide; Cell Adhesion; Cell Proliferation; Cells, Cultured; Dental Abutments; Dental Porcelain; Dental Prosthesis Design; Dental Veneers; Fibroblasts; Gingiva; Humans; Materials Testing; Surface Properties; Yttrium; Zirconium | 2008 |
Impact of thermal misfit on shear strength of veneering ceramic/zirconia composites.
Topics: Aluminum Oxide; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Dentin; Hot Temperature; Humans; Materials Testing; Metal Ceramic Alloys; Shear Strength; Transition Temperature; Yttrium; Zirconium | 2009 |
Off-axis sliding contact reliability and failure modes of veneered alumina and zirconia.
Topics: Aluminum Oxide; Cementation; Composite Resins; Dental Materials; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Microscopy, Polarization; Pliability; Reproducibility of Results; Stress, Mechanical; Surface Properties; Tungsten Compounds; Water; Yttrium; Zirconium | 2009 |
SEM observations of porcelain Y-TZP interface.
Topics: Acid Etching, Dental; Adhesiveness; Aluminum Oxide; Ceramics; Crystallography; Dental Bonding; Dental Materials; Dental Polishing; Dental Porcelain; Dental Veneers; Desiccation; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Solubility; Surface Properties; Time Factors; Water; Yttrium; Zirconium | 2009 |
New nano-sized Al2O3-BN coating 3Y-TZP ceramic composites for CAD/CAM-produced all-ceramic dental restorations. Part I. Fabrication of powders.
Topics: Aluminum Oxide; Biocompatible Materials; Boron Compounds; Ceramics; Computer-Aided Design; Dental Implants; Metal Nanoparticles; Microscopy, Electron, Transmission; Powders; X-Ray Diffraction; Yttrium; Zirconium | 2009 |
Evaluation of the surface roughness and morphologic features of Y-TZP ceramics after different surface treatments.
Topics: Air Abrasion, Dental; Aluminum Oxide; Analysis of Variance; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Lasers; Materials Testing; Microscopy, Electron, Scanning; Random Allocation; Surface Properties; Yttrium; Zirconium | 2009 |
The metal-free approach to restorative treatment planning.
Topics: Aluminum Oxide; Aluminum Silicates; Cementation; Ceramics; Crowns; Dental Alloys; Dental Porcelain; Dental Prosthesis Design; Dental Pulp; Denture Design; Denture, Partial, Fixed; Esthetics, Dental; Humans; Patient Care Planning; Periodontium; Potassium Compounds; Tooth Preparation; Yttrium; Zirconium | 2006 |
Effect of surface roughness on initial responses of osteoblast-like cells on two types of zirconia.
Topics: 3T3 Cells; Actin Cytoskeleton; Aluminum Oxide; Animals; Cell Adhesion; Cerium; Dental Porcelain; Flow Cytometry; Integrin alpha5; Integrin beta1; Materials Testing; Mice; Osteoblasts; Surface Properties; Titanium; Yttrium; Zirconium | 2009 |
Passive mode locking of a Tm,Ho:KY(WO4)2 laser around 2 microm.
Topics: Adsorption; Aluminum Oxide; Equipment Design; Holmium; Lasers; Light; Optics and Photonics; Potassium; Quantum Theory; Semiconductors; Thulium; Time Factors; Titanium; Tungsten; Yttrium | 2009 |
XRD2 micro-diffraction analysis of the interface between Y-TZP and veneering porcelain: role of application methods.
Topics: Aluminum Oxide; Computer-Aided Design; Crystallization; Dental Bonding; Dental Porcelain; Dental Veneers; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Phase Transition; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2010 |
Damage and reliability of Y-TZP after cementation surface treatment.
Topics: Aluminum Oxide; Cementation; Composite Resins; Computer-Aided Design; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dentin; Diamond; Humans; Materials Testing; Methacrylates; Microscopy, Polarization; Resin Cements; Stress, Mechanical; Surface Properties; Time Factors; Tungsten Compounds; Water; X-Ray Diffraction; Yttrium; Zirconium | 2010 |
The effect of nano-structured alumina coating on resin-bond strength to zirconia ceramics.
Topics: Aluminum Oxide; Coated Materials, Biocompatible; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Hot Temperature; Materials Testing; Microscopy, Atomic Force; Microscopy, Electron; Nanostructures; Random Allocation; Resin Cements; Shear Strength; Surface Properties; Yttrium; Zirconium | 2010 |
Shear bond strength between veneering ceramics and ceria-stabilized zirconia/alumina.
Topics: Aluminum Oxide; Cerium; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Diamond; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Nanocomposites; Shear Strength; Stress, Mechanical; Surface Properties; Vacuum; Yttrium; Zirconium | 2010 |
Fatigue life and failure modes of crowns systems with a modified framework design.
Topics: Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Chromium Alloys; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Veneers; Manikins; Metal Ceramic Alloys; Polyethylene Glycols; Polymethacrylic Acids; Random Allocation; Resin Cements; Survival Analysis; Yttrium; Zirconium | 2010 |
Combinatorial optimization of (Y(x)Lu(1-x-y))(3)Al(5)O(12):Ce(3y) green-yellow phosphors.
Topics: Aluminum Oxide; Cerium; Combinatorial Chemistry Techniques; Lutetium; Particle Size; Phosphorus; Small Molecule Libraries; Yttrium | 2010 |
Influence of contamination on resin bond strength to nano-structured alumina-coated zirconia ceramic.
Topics: Acid Etching, Dental; Aluminum Oxide; Carbon Compounds, Inorganic; Coated Materials, Biocompatible; Coloring Agents; Composite Resins; Dental Bonding; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Nanostructures; Phosphates; Phosphoric Acids; Resin Cements; Saliva; Silicon Compounds; Silicones; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Water; Yttrium; Zirconium | 2010 |
Subcritical crack growth behavior of dispersion oxide ceramics.
Topics: Aluminum Oxide; Ceramics; Dental Implants; Joint Prosthesis; Materials Testing; Yttrium; Zirconium | 2010 |
Comparison of candidate materials for a synthetic osteo-odonto keratoprosthesis device.
Topics: Aluminum Oxide; Alveolar Process; Bacterial Adhesion; Biocompatible Materials; Blotting, Western; Cell Adhesion; Cell Proliferation; Cell Survival; Cells, Cultured; Corneal Diseases; Corneal Stroma; Cuspid; Cytoskeletal Proteins; Durapatite; Fibroblasts; Humans; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Prostheses and Implants; Staphylococcus aureus; Titanium; Yttrium; Zirconium | 2011 |
Surface roughness and EDS characterization of a Y-TZP dental ceramic treated with the CoJet™ Sand.
Topics: Aluminum; Aluminum Oxide; Chemical Phenomena; Computer-Aided Design; Crystallography; Dental Etching; Dental Porcelain; Electron Probe Microanalysis; Ethanol; Humans; Materials Testing; Silicon; Silicon Dioxide; Solvents; Spectrometry, X-Ray Emission; Surface Properties; Time Factors; Ultrasonics; Water; X-Ray Diffraction; Yttrium; Zirconium | 2010 |
Surface damages of zirconia by Nd:YAG dental laser irradiation.
Topics: Air; Aluminum Oxide; Cerium; Color; Dental Porcelain; Hot Temperature; Humans; Lasers, Solid-State; Materials Testing; Microscopy, Electron, Scanning; Nanocomposites; Oxygen; Spectrometry, X-Ray Emission; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2010 |
Fatigue behavior in water of Y-TZP zirconia ceramics after abrasion with 30 μm silica-coated alumina particles.
Topics: Aluminum Oxide; Chemical Phenomena; Dental Etching; Dental Porcelain; Dental Stress Analysis; Elastic Modulus; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Pliability; Silicates; Silicon Dioxide; Stress, Mechanical; Surface Properties; Water; X-Ray Diffraction; Yttrium; Zirconium | 2011 |
Effect of air abrasion particles on the bond strength of adhesive resin cement to zirconia core.
Topics: Aluminum Oxide; Boron Compounds; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Stress Analysis; Diamond; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Resin Cements; Shear Strength; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2011 |
[Evaluation of alumina effects on the mechanical property and translucency of nano-zirconia all-ceramics].
Topics: Aluminum Oxide; Ceramics; Dental Porcelain; Dental Stress Analysis; Elasticity; Hardness; Materials Testing; Microscopy, Electron, Scanning; Nanoparticles; Pliability; Surface Properties; Yttrium; Zirconium | 2010 |
Thermally stable green Ba(3)Y(PO(4))3:Ce(3+),Tb(3+) and red Ca(3)Y(AlO)(3)(BO(3))4:Eu(3+) phosphors for white-light fluorescent lamps.
Topics: Aluminum Oxide; Barium; Calcium; Cesium; Europium; Light; Microscopy, Fluorescence; Phosphorus; Spectrometry, Fluorescence; Terbium; Ultraviolet Rays; X-Ray Diffraction; Yttrium | 2011 |
Sonocatalytic degradation of organic dyes and influence of Al(2)O(3), Y(2)O(3) and Fe(2)O(3) on catalytic activity of TiO(2) under ultrasonic irradiation.
Topics: Aluminum Oxide; Azo Compounds; Catalysis; Coloring Agents; Ferric Compounds; Naphthalenesulfonates; Temperature; Titanium; Ultrasonics; Water Pollutants, Chemical; Water Purification; Yttrium | 2011 |
Effect of the microstructure on the lifetime of dental ceramics.
Topics: Aluminum Oxide; Aluminum Silicates; Crystallization; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Denture, Partial, Fixed; Elasticity; Materials Testing; Microscopy, Electron, Scanning; Porosity; Potassium Compounds; Spectrometry, X-Ray Emission; Surface Properties; Survival Analysis; Tensile Strength; Yttrium; Zirconium | 2011 |
Novel fabrication method for zirconia restorations: bonding strength of machinable ceramic to zirconia with resin cements.
Topics: Aluminum Oxide; Aluminum Silicates; Apatites; Ceramics; Computer-Aided Design; Dental Bonding; Dental Cements; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Restoration, Permanent; Dental Stress Analysis; Feasibility Studies; Hardness; Humans; Materials Testing; Methacrylates; Resin Cements; Shear Strength; Silanes; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2011 |
Phase transformation of zirconia ceramics by hydrothermal degradation.
Topics: Aluminum Oxide; Chemical Phenomena; Crystallography; Dental Polishing; Dental Porcelain; Humans; Materials Testing; Microscopy, Electron, Scanning; Microscopy, Electron, Transmission; Phase Transition; Scattering, Radiation; Surface Properties; Temperature; Time Factors; Water; X-Ray Diffraction; Yttrium; Zirconium | 2011 |
Design of a new, multi-purpose, light-curing adhesive comprising a silane coupling agent, acidic adhesive monomers and dithiooctanoate monomers for bonding to varied metal and dental ceramic materials.
Topics: Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Caprylates; Chromium Alloys; Composite Resins; Dental Alloys; Dental Cements; Dental Etching; Dental Porcelain; Gold Alloys; Humans; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Organophosphonates; Palladium; Phosphonoacetic Acid; Phthalic Acids; Polyethylene Glycols; Polymethacrylic Acids; Propionates; Shear Strength; Silanes; Silver; Stress, Mechanical; Surface Properties; Temperature; Yttrium; Zirconium | 2011 |
Joining dental ceramic layers with glass.
Topics: Aluminum Oxide; Crowns; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Elastic Modulus; Glass; Hardness; Materials Testing; Vitrification; Yttrium; Zirconium | 2011 |
Flexural strength and failure modes of layered ceramic structures.
Topics: Algorithms; Aluminum Oxide; Aluminum Silicates; Ceramics; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Elastic Modulus; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Pliability; Potassium Compounds; Saliva, Artificial; Stress, Mechanical; Surface Properties; Temperature; Ultrasonics; Vacuum; Yttrium; Zirconium | 2011 |
Influence of veneer thickness on residual stress profile in veneering ceramic: measurement by hole-drilling.
Topics: Acid Etching, Dental; Aluminum Oxide; Aluminum Silicates; Carbon Compounds, Inorganic; Ceramics; Chromium Alloys; Computer-Aided Design; Dental Etching; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Hot Temperature; Humans; Hydrofluoric Acid; Materials Testing; Mechanical Phenomena; Metal Ceramic Alloys; Potassium Compounds; Silicon Compounds; Stress, Mechanical; Surface Properties; Thermodynamics; Yttrium; Zirconium | 2012 |
Sensitivity analysis of bi-layered ceramic dental restorations.
Topics: Algorithms; Aluminum Oxide; Aluminum Silicates; Ceramics; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Veneers; Elastic Modulus; Energy Transfer; Finite Element Analysis; Hot Temperature; Humans; Materials Testing; Mechanical Phenomena; Potassium Compounds; Shear Strength; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Thermal Conductivity; Thermodynamics; Yttrium; Zirconium | 2012 |
[Strength of bi-layer dental ceramic evaluated by MSP testing].
Topics: Aluminum Oxide; Ceramics; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Tensile Strength; Yttrium; Zirconium | 2011 |
Shear bond strengths between alumina-toughened zirconia cores and veneering ceramics and their susceptibility to aging.
Topics: Aluminum Oxide; Ceramics; Dental Veneers; Microscopy, Electron, Scanning; Prosthesis Failure; Saliva, Artificial; Shear Strength; Spectrum Analysis; Yttrium; Zirconium | 2012 |
Surface characterization of dental Y-TZP ceramic after air abrasion treatment.
Topics: Aluminum Oxide; Ceramics; Crystallization; Crystallography; Dental Etching; Dental Materials; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Nanoparticles; Particle Size; Photoelectron Spectroscopy; Pressure; Silicates; Silicon Dioxide; Spectrometry, X-Ray Emission; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
Evaluation of a conditioning method to improve core-veneer bond strength of zirconia restorations.
Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Ceramics; Coated Materials, Biocompatible; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Shear Strength; Silicon Compounds; Stress, Mechanical; Surface Properties; Water; Yttrium; Zirconium | 2012 |
Residual thermal stress simulation in three-dimensional molar crown systems: a finite element analysis.
Topics: Aluminum Oxide; Compressive Strength; Computer Simulation; Crowns; Dental Porcelain; Dental Prosthesis Design; Dental Stress Analysis; Dental Veneers; Finite Element Analysis; Hot Temperature; Humans; Imaging, Three-Dimensional; Metals; Molar; Stress, Mechanical; Tensile Strength; Yttrium; Zirconium | 2012 |
Examination of bond strength and mechanical properties of Y-TZP zirconia ceramics with different surface modifications.
Topics: Aluminum Oxide; Coated Materials, Biocompatible; Crystallography, X-Ray; Dental Bonding; Dental Porcelain; Dental Veneers; Electron Probe Microanalysis; Mechanical Phenomena; Particle Size; Pliability; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2012 |
Impact of air-abrasion on fracture load and failure type of veneered anterior Y-TZP crowns before and after chewing simulation.
Topics: Aluminum Oxide; Dental Veneers; Humans; Mastication; Materials Testing; Time Factors; Weight-Bearing; Yttrium; Zirconium | 2012 |
An alumina ceramic target vessel for the remote production of metallic radionuclides by in situ target dissolution.
Topics: Aluminum Oxide; Radiochemistry; Radioisotopes; Solutions; Yttrium; Zirconium | 2012 |
Influence of CAD/CAM systems and cement selection on marginal discrepancy of zirconia-based ceramic crowns.
Topics: Aluminum Oxide; Bicuspid; Cementation; Computer-Aided Design; Crowns; Dental Cements; Dental Marginal Adaptation; Dental Porcelain; Dental Prosthesis Design; Glass Ionomer Cements; Humans; Magnesium Oxide; Materials Testing; Microscopy, Electron, Scanning; Models, Dental; Phosphates; Polycarboxylate Cement; Polymers; Resin Cements; Surface Properties; Tooth Preparation, Prosthodontic; Yttrium; Zinc Oxide; Zirconium | 2012 |
Influence of surface pretreatment on the short-term bond strength of resin composite to a zirconia-based material.
Topics: Aluminum Oxide; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Stress Analysis; Hot Temperature; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Particle Size; Resin Cements; Silanes; Stress, Mechanical; Surface Properties; Tensile Strength; Yttrium; Zirconium | 2012 |
In vitro evaluation of the effects of yttria-alumina-silica microspheres on human keratinocyte cells.
Topics: Aluminum Oxide; Cell Line; Cell Proliferation; Humans; Keratinocytes; Materials Testing; Microspheres; Photoelectron Spectroscopy; Silicon Dioxide; X-Ray Diffraction; Yttrium | 2013 |
Influence of air-abrasion and subsequent heat treatment on bonding between zirconia framework material and indirect composites.
Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Computer-Aided Design; Crystallography; Dental Bonding; Dental Etching; Dental Materials; Dental Stress Analysis; Hot Temperature; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Polyurethanes; Shear Strength; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Water; X-Ray Diffraction; Yttrium; Zirconium | 2012 |
Change in surface properties of zirconia and initial attachment of osteoblastlike cells with hydrophilic treatment.
Topics: 3T3 Cells; Acid Etching, Dental; Air; Aluminum Oxide; Animals; Carbon; Cell Adhesion; Cell Shape; Dental Etching; Hydrofluoric Acid; Hydrophobic and Hydrophilic Interactions; Hydroxides; Mice; Microscopy, Confocal; Nanostructures; Osteoblasts; Oxygen; Photoelectron Spectroscopy; Plasma Gases; Surface Properties; Ultraviolet Rays; Water; Wettability; Yttrium; Zirconium | 2012 |
Response of osteoblast-like cells to zirconia with different surface topography.
Topics: 3T3 Cells; Acid Etching, Dental; Alkaline Phosphatase; Aluminum Oxide; Analysis of Variance; Animals; Cell Adhesion; Cell Culture Techniques; Cell Differentiation; Collagen Type I; Gene Expression; Hydrofluoric Acid; Materials Testing; Mice; Microscopy, Electron, Scanning; Osteoblasts; Osteocalcin; Surface Properties; Yttrium; Zirconium | 2013 |
Effect of thickness of zirconia-ceramic crown frameworks on strength and fracture pattern.
Topics: Aluminum Oxide; Analysis of Variance; Ceramics; Cerium; Chromium; Cobalt; Crowns; Dental Alloys; Dental Prosthesis Design; Dental Stress Analysis; Equipment Failure Analysis; Materials Testing; Nanocomposites; Yttrium; Zirconium | 2013 |
Low temperature degradation and reliability of one-piece ceramic oral implants with a porous surface.
Topics: Aluminum Oxide; Coated Materials, Biocompatible; Dental Implants; Dental Stress Analysis; Equipment Failure Analysis; Microscopy, Electron, Scanning; Porosity; Surface Properties; Temperature; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Effect of surface modification on the bond strength between zirconia and resin cement.
Topics: Adhesiveness; Aluminum Oxide; Ceramics; Computer-Aided Design; Dental Bonding; Dental Etching; Dental Materials; Hot Temperature; Humans; Humidity; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Polymerization; Porosity; Resin Cements; Stress, Mechanical; Surface Properties; Temperature; Yttrium; Zirconium | 2013 |
Comparison of an absolute and surrogate measure of relative translucency in dental ceramics.
Topics: Algorithms; Aluminum Oxide; Aluminum Silicates; Ceramics; Dental Porcelain; Humans; Light; Magnesium Oxide; Materials Testing; Radiometry; Spectrophotometry; Surface Properties; Yttrium; Zirconium | 2013 |
In vivo wear performance of highly cross-linked polyethylene vs. yttria stabilized zirconia and alumina stabilized zirconia at a mean seven-year follow-up.
Topics: Adult; Aged; Aged, 80 and over; Aluminum Oxide; Female; Follow-Up Studies; Hip Prosthesis; Humans; Male; Middle Aged; Polyethylene; Prosthesis Design; Young Adult; Yttrium; Zirconium | 2013 |
Influence of Er:YAG and Ti:sapphire laser irradiation on the microtensile bond strength of several adhesives to dentin.
Topics: Adhesives; Aluminum; Aluminum Oxide; Dental Bonding; Dentin; Dentin-Bonding Agents; Erbium; Humans; Laser Therapy; Lasers; Microscopy, Electron, Scanning; Molar; Regression Analysis; Resin Cements; Tensile Strength; Yttrium | 2015 |
Evaluation of air-particle abrasion of Y-TZP with different particles using microstructural analysis.
Topics: Aluminum Oxide; Ceramics; Dental Stress Analysis; Materials Testing; Particle Size; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2013 |
Fatigue behavior of the resinous cement to zirconia bond.
Topics: Adhesiveness; Aluminum Oxide; Antioxidants; Ceramics; Dental Bonding; Dental Etching; Dental Materials; Humans; Materials Testing; Organosilicon Compounds; Resin Cements; Shear Strength; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2013 |
Investigation of structural and luminescence properties of Ho(3+) doped YAlO3 nanophosphors synthesized through solution combustion route.
Topics: Aluminum Oxide; Holmium; Luminescence; Nanoparticles; Nanotechnology; Oxides; Particle Size; Powders; Solutions; Spectrophotometry, Ultraviolet; Spectroscopy, Fourier Transform Infrared; Thermodynamics; X-Ray Diffraction; Yttrium | 2013 |
Effect of surface treatments on the bonding strength of self-adhesive resin cements to zirconia ceramics.
Topics: Acid Etching, Dental; Adhesiveness; Aluminum Oxide; Dental Bonding; Dental Etching; Dental Materials; Dental Porcelain; Hot Temperature; Materials Testing; Methylene Chloride; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Pliability; Resin Cements; Solvents; Stress, Mechanical; Surface Properties; Temperature; Time Factors; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
An in vitro comparison of shear bond strength of zirconia to enamel using different surface treatments.
Topics: Acid Etching, Dental; Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Ceramics; Dental Bonding; Dental Enamel; Dental Etching; Dental Materials; Dental Stress Analysis; Humans; Hydrogen Peroxide; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Random Allocation; Resin Cements; Shear Strength; Silanes; Stress, Mechanical; Sulfuric Acids; Surface Properties; Temperature; Thiones; Time Factors; Water; Yttrium; Zirconium | 2014 |
Influence of proximal supportive design of zirconia framework on fracture load of veneering porcelain.
Topics: Aluminum Oxide; Computer-Aided Design; Dental Etching; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Hot Temperature; Humans; Materials Testing; Stress, Mechanical; Surface Properties; Time Factors; Yttrium; Zirconium | 2013 |
In vitro evaluation of osteoconductivity and cellular response of zirconia and alumina based ceramics.
Topics: Alkaline Phosphatase; Aluminum Oxide; Bone Regeneration; Calcium; Cell Adhesion; Cell Differentiation; Cell Line; Cell Proliferation; Cell Shape; Ceramics; Cerium; Durapatite; Hardness; Humans; Osteoblasts; Particle Size; Phosphorus; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Fracture strength and microstructure of Y-TZP zirconia after different surface treatments.
Topics: Aluminum Oxide; Cementation; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Diamond; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Pliability; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Effect of particle size on the flexural strength and phase transformation of an airborne-particle abraded yttria-stabilized tetragonal zirconia polycrystal ceramic.
Topics: Aluminum Oxide; Chemical Phenomena; Dental Etching; Dental Materials; Dental Stress Analysis; Humans; Materials Testing; Particle Size; Pliability; Saliva, Artificial; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; X-Ray Diffraction; Yttrium; Zirconium | 2013 |
Residual stress profiles in veneering ceramic on Y-TZP, alumina and ZTA frameworks: measurement by hole-drilling.
Topics: Aluminum Oxide; Ceramics; Dental Veneers; Microscopy, Electron, Scanning; Stress, Mechanical; Yttrium; Zirconium | 2014 |
The potential of novel primers and universal adhesives to bond to zirconia.
Topics: Aluminum Oxide; Ceramics; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Dental Porcelain; Humans; Materials Testing; Methacrylates; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Resin Cements; Silanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Yttrium; Zirconium | 2014 |
Detachable microsphere scalpel tips for potential use in ophthalmic surgery with the erbium:YAG laser.
Topics: Algorithms; Aluminum Oxide; Animals; Cornea; Diabetic Retinopathy; Epithelium; Erbium; Fiber Optic Technology; Laser Therapy; Lasers, Solid-State; Microspheres; Models, Theoretical; Ophthalmologic Surgical Procedures; Optical Fibers; Retina; Swine; Vitreoretinal Surgery; Yttrium | 2014 |
Influence of multimode universal adhesives and zirconia primer application techniques on zirconia repair.
Topics: Aluminum Oxide; Ceramics; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Prosthesis Repair; Dental Stress Analysis; Humans; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Polymerization; Resin Cements; Shear Strength; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2014 |
Effects of surface-finishing protocols on the roughness, color change, and translucency of different ceramic systems.
Topics: Aluminum Oxide; Ceramics; Color; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Veneers; Diamond; Hot Temperature; Humans; Light; Materials Testing; Metal Ceramic Alloys; Spectrophotometry; Surface Properties; Yttrium; Zirconium | 2014 |
Influence of surface treatment of yttrium-stabilized tetragonal zirconium oxides and cement type on crown retention after artificial aging.
Topics: Aluminum Oxide; Computer-Aided Design; Crowns; Dental Bonding; Dental Etching; Dental Materials; Dental Prosthesis Design; Dental Prosthesis Retention; Dental Stress Analysis; Humans; Materials Testing; Resin Cements; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Tooth Preparation, Prosthodontic; Yttrium; Zirconium | 2014 |
Survival of anterior cantilevered all-ceramic resin-bonded fixed dental prostheses made from zirconia ceramic.
Topics: Adolescent; Adult; Air Abrasion, Dental; Aluminum Oxide; Cementation; Ceramics; Dental Etching; Dental Materials; Dental Restoration Failure; Denture Design; Denture, Partial, Fixed, Resin-Bonded; Female; Follow-Up Studies; Humans; Incisor; Male; Middle Aged; Phosphates; Resin Cements; Survival Analysis; Tooth Loss; Treatment Outcome; Young Adult; Yttrium; Zirconium | 2014 |
Effects of fly ash and boric acid on Y2O3-stabilized tetragonal ZrO2 dispersed with MgAl2O4: An experimental study on rat subcutaneous tissue.
Topics: Aluminum Oxide; Animals; Boric Acids; Coal Ash; Dental Implants; Dental Materials; Inflammation; Lymph Nodes; Magnesium Oxide; Male; Mast Cells; Muscle, Skeletal; Rats; Rats, Wistar; Subcutaneous Tissue; Yttrium; Zirconium | 2015 |
Effect of zirconia surface treatment on zirconia/veneer interfacial toughness evaluated by fracture mechanics method.
Topics: Algorithms; Aluminum Oxide; Ceramics; Dental Etching; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Humans; Imaging, Three-Dimensional; Interferometry; Light; Materials Testing; Microscopy, Electron, Scanning; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2014 |
Fracture Strength of Zirconia and Alumina Ceramic Crowns Supported by Implants.
Topics: Aluminum Oxide; Cementation; Ceramics; Computer-Aided Design; Crowns; Dental Abutments; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Dental Stress Analysis; Dental Veneers; Humans; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Stress, Mechanical; Surface Properties; Titanium; Yttrium; Zirconium | 2015 |
Spark plasma sintered Al₂O₃-YSZ-TiO₂ composites: processing, characterization and in vivo evaluation.
Topics: Aluminum Oxide; Animals; Biocompatible Materials; Femur; Hardness; Hot Temperature; Osseointegration; Pressure; Prostheses and Implants; Rats; Rats, Wistar; Titanium; Yttrium; Zirconium | 2014 |
Mechanical properties and bonding potential of partially stabilized zirconia treated with different chemomechanical treatments.
Topics: Acid Etching, Dental; Aluminum Oxide; Chlorides; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Stress Analysis; Elastic Modulus; Ethanol; Ferric Compounds; Hardness; Hot Temperature; Hydrochloric Acid; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Pliability; Resin Cements; Shear Strength; Silanes; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
Flexural resistance of Cerec CAD/CAM system ceramic blocks. Part 2: Outsourcing materials.
Topics: Aluminum Oxide; Ceramics; Computer-Aided Design; Dental Porcelain; Elastic Modulus; Humans; Magnesium Oxide; Materials Testing; Pliability; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2014 |
Effect of Er,Cr:YSGG laser treatment on microshear bond strength of zirconia to resin cement before and after sintering.
Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Dental Bonding; Dental Etching; Dental Polishing; Hot Temperature; Humidity; Lasers, Solid-State; Materials Testing; Microscopy, Electron, Scanning; Radiation Dosage; Resin Cements; Shear Strength; Silicon Compounds; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2014 |
The strength of sintered and adhesively bonded zirconia/veneer-ceramic bilayers.
Topics: Acid Etching, Dental; Algorithms; Aluminum Oxide; Carbon Compounds, Inorganic; Cementation; Ceramics; Computer-Aided Design; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Veneers; Elastic Modulus; Finite Element Analysis; Hot Temperature; Humans; Hydrofluoric Acid; Microscopy, Electron, Scanning; Phosphates; Pliability; Resin Cements; Silanes; Silicon Compounds; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2014 |
Effect of different laser surface treatment on microshear bond strength between zirconia ceramic and resin cement.
Topics: Adhesiveness; Aluminum Oxide; Ceramics; Dental Bonding; Dental Etching; Dental Materials; Dental Stress Analysis; Humans; Humidity; Lasers; Lasers, Gas; Lasers, Solid-State; Light-Curing of Dental Adhesives; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium | 2015 |
Effect of surface and heat treatments on the biaxial flexural strength and phase transformation of a Y-TZP ceramic.
Topics: Aluminum Oxide; Crystallography; Dental Etching; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Diamond; Elastic Modulus; Hot Temperature; Materials Testing; Pliability; Silicon Dioxide; Stress, Mechanical; Surface Properties; Water; X-Ray Diffraction; Yttrium; Zirconium | 2014 |
The combined effect of alumina and silica co-doping on the ageing resistance of 3Y-TZP bioceramics.
Topics: Aluminum Oxide; Dental Porcelain; Hardness; Materials Testing; Particle Size; Porosity; Silicon Dioxide; Surface Properties; Temperature; Yttrium; Zirconium | 2015 |
Influence of zirconia surface treatment on veneering porcelain shear bond strength after cyclic loading.
Topics: Aluminum Oxide; Ceramics; Computer-Aided Design; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Diamond; Hot Temperature; Humans; Materials Testing; Pressure; Shear Strength; Stress, Mechanical; Surface Properties; Time Factors; Yttrium; Zirconium | 2014 |
Evaluation of roughness, wettability, and morphology of an yttria-stabilized tetragonal zirconia polycrystal ceramic after different airborne-particle abrasion protocols.
Topics: Aluminum Oxide; Ceramics; Coated Materials, Biocompatible; Dental Etching; Dental Materials; Hot Temperature; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Particle Size; Silanes; Silicon Dioxide; Surface Properties; Time Factors; Wettability; Yttrium; Zirconium | 2014 |
Protection of yttria-stabilized zirconia for dental applications by oxidic PVD coating.
Topics: Aluminum Oxide; Coated Materials, Biocompatible; Dental Porcelain; Elastic Modulus; Electroplating; Gases; Hardness; Materials Testing; Oxidation-Reduction; Surface Properties; Tensile Strength; Titanium; Yttrium; Zirconium | 2015 |
Effect of surface treatments on the shear bond strength of luting cements to Y-TZP ceramic.
Topics: Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Ceramics; Coated Materials, Biocompatible; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Stress Analysis; Glass Ionomer Cements; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Shear Strength; Silanes; Silicon Dioxide; Spectrometry, X-Ray Emission; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2015 |
Aging resistance of surface-treated dental zirconia.
Topics: Acrylic Resins; Aluminum Oxide; Composite Resins; Dental Etching; Dental Porcelain; Materials Testing; Polyurethanes; Silicon Dioxide; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2015 |
Effect of ceramic infrastructure on the failure behavior and stress distribution of fixed partial dentures.
Topics: Aluminum Oxide; Dental Porcelain; Dental Restoration Failure; Dental Stress Analysis; Denture Design; Denture, Partial, Fixed; Finite Element Analysis; Materials Testing; Metal Ceramic Alloys; Yttrium | 2015 |
Effect of surface treatments on the biaxial flexural strength, phase transformation, and surface roughness of bilayered porcelain/zirconia dental ceramics.
Topics: Algorithms; Aluminum Oxide; Ceramics; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Veneers; Diamond; Elastic Modulus; Humans; Materials Testing; Particle Size; Pliability; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2015 |
A critical evaluation of bond strength tests for the assessment of bonding to Y-TZP.
Topics: Aluminum Oxide; Composite Resins; Dental Bonding; Dental Porcelain; Dental Stress Analysis; In Vitro Techniques; Materials Testing; Reproducibility of Results; Resin Cements; Shear Strength; Silanes; Silicon Dioxide; Surface Properties; Tensile Strength; Yttrium; Zirconium | 2015 |
Evaluation of marginal and internal fit of ceramic and metallic crown copings using x-ray microtomography (micro-CT) technology.
Topics: Aluminum Oxide; Ceramics; Chromium Alloys; Crowns; Dental Etching; Dental Marginal Adaptation; Dental Materials; Dental Porcelain; Image Processing, Computer-Assisted; Materials Testing; Surface Properties; X-Ray Microtomography; Yttrium; Zirconium | 2015 |
Can application of universal primers alone be a substitute for airborne-particle abrasion to improve adhesion of resin cement to zirconia?
Topics: Adhesiveness; Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Resin Cements; Shear Strength; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Water; Wettability; Yttrium; Zirconium | 2015 |
Bonding Effectiveness to Differently Sandblasted Dental Zirconia.
Topics: Aluminum Oxide; Ceramics; Dental Bonding; Dental Etching; Dental Materials; Elastic Modulus; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Random Allocation; Resin Cements; Silanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Water; Yttrium; Zirconium | 2015 |
Effect of Adhesive Resin Type for Bonding to Zirconia Using Two Surface Pretreatments.
Topics: Acid Etching, Dental; Adhesiveness; Air Abrasion, Dental; Aluminum Oxide; Ceramics; Dental Bonding; Dental Cements; Dental Etching; Humans; Hydrolysis; Materials Testing; Methacrylates; Random Allocation; Resin Cements; Shear Strength; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium | 2015 |
Structural and Chemical Analysis of the Zirconia-Veneering Ceramic Interface.
Topics: Aluminum; Aluminum Oxide; Argon; Calcium; Ceramics; Dental Etching; Dental Materials; Dental Polishing; Dental Veneers; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Microscopy, Electron, Transmission; Nanoparticles; Silicon; Spectrometry, X-Ray Emission; Spectrum Analysis, Raman; Stress, Mechanical; Surface Properties; Thermodynamics; Yttrium; Zirconium | 2016 |
Role of self-assembly coated Er(3+): YAlO3/TiO2 in intimate coupling of visible-light-responsive photocatalysis and biodegradation reactions.
Topics: Aluminum Oxide; Biodegradation, Environmental; Catalysis; Environmental Pollutants; Erbium; Microscopy, Electron, Scanning; Phenol; Photolysis; Spectrometry, Fluorescence; Titanium; X-Ray Diffraction; Yttrium | 2016 |
Wear studies on plasma-sprayed Al2O3 and 8mole% of Yttrium-stabilized ZrO2 composite coating on biomedical Ti-6Al-4V alloy for orthopedic joint application.
Topics: Alloys; Aluminum Oxide; Biocompatible Materials; Ceramics; Hardness; Humans; Joint Prosthesis; Materials Testing; Orthopedics; Plasma; Titanium; Yttrium; Zirconium | 2015 |
Study of formation of deep trapping mechanism by UV, beta and gamma irradiated Eu(3+) activated SrY2O4 and Y4Al2O9 phosphors.
Topics: Aluminum Oxide; Beta Particles; Europium; Gamma Rays; Kinetics; Luminescence; Luminescent Measurements; Microscopy, Electron, Scanning; Spectrometry, X-Ray Emission; Spectroscopy, Fourier Transform Infrared; Strontium; Thermoluminescent Dosimetry; Ultraviolet Rays; X-Ray Diffraction; Yttrium | 2016 |
Durability of Resin-Zirconia Bonds Produced Using Methods Available in Dental Practice.
Topics: Aluminum Oxide; Ceramics; Coated Materials, Biocompatible; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Humans; Materials Testing; Phosphates; Resin Cements; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Water; Yttrium; Zirconium | 2016 |
Influence of Light Irradiation Through Zirconia on the Degree of Conversion of Composite Cements.
Topics: Aluminum Oxide; Ceramics; Cerium; Composite Resins; Curing Lights, Dental; Dental Materials; Dental Veneers; Humans; Light; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Microspectrophotometry; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyurethanes; Radiation Dosage; Resin Cements; Scattering, Radiation; Spectrum Analysis, Raman; Surface Properties; Yttrium; Zirconium | 2016 |
[Effect of Al₂O₃ sandblasting on the bond strength between 3mol% yttrium-stabilized tetragonal zirconium polycrystal zirconia framework and veneering porcelain].
Topics: Aluminum Oxide; Dental Bonding; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Materials Testing; Microscopy, Electron, Scanning; Shear Strength; Surface Properties; Yttrium; Zirconium | 2015 |
Enhanced cell adhesion on bioinert ceramics mediated by the osteogenic cell membrane enzyme alkaline phosphatase.
Topics: Alkaline Phosphatase; Aluminum Oxide; Cell Adhesion; Cell Line; Cell Membrane; Ceramics; Enzymes, Immobilized; Humans; Microscopy, Fluorescence; Surface Properties; Wettability; Yttrium; Zirconium | 2016 |
The evaluation of prepared microgroove pattern by femtosecond laser on alumina-zirconia nano-composite for endosseous dental implant application.
Topics: Aluminum Oxide; Dental Implantation, Endosseous; Dental Implants; Dental Materials; Materials Testing; Microscopy, Electron, Scanning; Nanocomposites; Spectrometry, X-Ray Emission; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2016 |
Translucent zirconia in the ceramic scenario for monolithic restorations: A flexural strength and translucency comparison test.
Topics: Aluminum Oxide; Ceramics; Dental Materials; Dental Porcelain; Dental Stress Analysis; Elastic Modulus; Humans; Materials Testing; Models, Theoretical; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2017 |
Dimensional changes from the sintering process and fit of Y-TZP copings: Micro-CT analysis.
Topics: Aluminum Oxide; Ceramics; Computer-Aided Design; Crowns; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Humans; Prosthesis Fitting; X-Ray Microtomography; Yttrium; Zirconium | 2017 |
[Preparation processes of 3% yttria-stabilized tetragonal zirconia polycrystalline ceramic composite powders coated with nano-sized Al₂O₃-boron nitride].
Topics: Aluminum Oxide; Boron Compounds; Ceramics; Materials Testing; Powders; Yttrium; Zirconium | 2017 |
Influence of Particle and Air-Abrasion Moment on Y-TZP Surface Characterization and Bond Strength.
Topics: Air Abrasion, Dental; Aluminum Oxide; Analysis of Variance; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Cements; Dental Materials; Dental Restoration Failure; Dental Stress Analysis; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Shear Strength; Silicon Dioxide; Surface Properties; Wettability; Yttrium; Zirconium | 2019 |
Effect of sandblasting, silica coating, and erbium: Yttrium-Aluminum-Garnet laser treatment on the shear bond strength of self-adhesive resin cement to alumina ceramics.
Topics: Aluminum; Aluminum Oxide; Ceramics; Dental Bonding; Erbium; Humans; Lasers, Solid-State; Materials Testing; Resin Cements; Shear Strength; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2018 |
Does Luting Strategy Affect the Fatigue Behavior of Bonded Y-TZP Ceramic?
Topics: Aluminum Oxide; Dental Bonding; Dental Stress Analysis; Materials Testing; Resin Cements; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2018 |
Mechanisms induced by transition metal contaminants and their effect on the hydrothermal stability of zirconia-containing bioceramics: an XPS study.
Topics: Aluminum Oxide; Biocompatible Materials; Ceramics; Kinetics; Materials Testing; Phase Transition; Photoelectron Spectroscopy; Surface Properties; Temperature; Water; Yttrium; Zirconium | 2018 |
Phase Transformation and Roughening in Artificially Aged and Retrieved Zirconia-Toughened Alumina Femoral Heads.
Topics: Aluminum Oxide; Ceramics; Femur Head; Hip Prosthesis; Humans; Magnesium Oxide; Materials Testing; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium | 2019 |
Cortical bone response toward nanosecond-pulsed laser-treated zirconia implant surfaces.
Topics: Aluminum Oxide; Animals; Cortical Bone; Rats; Surface Properties; Yttrium; Zirconium | 2019 |
Air-abrasion using new silica-alumina powders containing different silica concentrations: Effect on the microstructural characteristics and fatigue behavior of a Y-TZP ceramic.
Topics: Air; Aluminum Oxide; Ceramics; Mechanical Phenomena; Powders; Silicon Dioxide; Yttrium; Zirconium | 2019 |
Molten salt synthesis and luminescence of Dy
Topics: Aluminum Oxide; Dysprosium; Luminescence; Luminescent Agents; Powder Diffraction; Salts; Yttrium | 2020 |
Mechanical properties of aged yttria-stabilized tetragonal zirconia polycrystal after abrasion with different aluminum oxide particles.
Topics: Aluminum Oxide; Ceramics; Dental Materials; Dental Stress Analysis; Materials Testing; Stress, Mechanical; Surface Properties; Yttrium; Zirconium | 2020 |
Aging resistance of an experimental zirconia-toughened alumina composite for large span dental prostheses: Optical and mechanical characterization.
Topics: Aluminum Oxide; Ceramics; Dental Materials; Dental Prosthesis; Materials Testing; Surface Properties; Yttrium; Zirconium | 2020 |
Stable Resin Bonding to Y-TZP Ceramic with Air Abrasion by Alumina Particles Containing 7% Silica.
Topics: Air Abrasion, Dental; Aluminum Oxide; Ceramics; Dental Bonding; Resin Cements; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2020 |
Aging resistant ZTA composite for dental applications: Microstructural, optical and mechanical characterization.
Topics: Aluminum Oxide; Ceramics; Dental Materials; Materials Testing; Surface Properties; Yttrium; Zirconium | 2020 |
Effects of Tribochemical Silica Coating and Alumina-Particle Air Abrasion on 3Y-TZP and 5Y-TZP: Evaluation of Surface Hardness, Roughness, Bonding, and Phase Transformation.
Topics: Air Abrasion, Dental; Aluminum Oxide; Dental Bonding; Hardness; Materials Testing; Resin Cements; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2020 |
Surface treatments and its effects on the fatigue behavior of a 5% mol yttria partially stabilized zirconia material.
Topics: Aluminum Oxide; Ceramics; Dental Stress Analysis; Materials Testing; Silicon Dioxide; Surface Properties; Yttrium; Zirconium | 2021 |
Nanoscale physico-mechanical properties of an aging resistant ZTA composite.
Topics: Aluminum Oxide; Ceramics; Dental Materials; Materials Testing; Surface Properties; Yttrium; Zirconium | 2021 |
Effect of different zirconia surface pretreatments on the flexural strength of veneered Y-TZP ceramic before and after in vitro aging.
Topics: Aluminum Oxide; Ceramics; Dental Materials; Flexural Strength; Materials Testing; Silanes; Surface Properties; Yttrium; Zirconium | 2022 |
Silica deposition on zirconia via room-temperature atomic layer deposition (RT-ALD): Effect on bond strength to veneering ceramic.
Topics: Aluminum Oxide; Ceramics; Dental Bonding; Materials Testing; Shear Strength; Silicon Dioxide; Surface Properties; Temperature; Yttrium; Zirconium | 2022 |
Stability of fatigued and aged ZTA compared to 3Y-TZP and Al
Topics: Aged; Aluminum Oxide; Ceramics; Dental Materials; Humans; Materials Testing; Reproducibility of Results; Surface Properties; Yttrium; Zirconium | 2022 |