triethylene glycol dimethacrylate has been researched along with phosphoric acid in 31 studies
Timeframe | Studies, this research(%) | All Research% |
---|---|---|
pre-1990 | 0 (0.00) | 18.7374 |
1990's | 3 (9.68) | 18.2507 |
2000's | 2 (6.45) | 29.6817 |
2010's | 26 (83.87) | 24.3611 |
2020's | 0 (0.00) | 2.80 |
Authors | Studies |
---|---|
Finger, WJ; Inoue, M; Mueller, M | 1 |
Kato, G; Nakabayashi, N | 2 |
Nakabayashi, N; Shinchi, MJ; Soma, K | 1 |
Bueno, M; Fontes, ST; Lima, GS; Ogliari, FA; Piva, E; Schneider, LF | 1 |
Iwasa, M; Miyazaki, M; Murayama, R; Shimamura, Y; Takamizawa, T; Tsujimoto, A | 1 |
Braga, RR; Breschi, L; Mazzoni, A; Sadek, FT; Tay, FR | 1 |
Gomi, H; Lin, J; Shinya, A | 1 |
Meyer-Lueckel, H; Paris, S | 1 |
Attin, T; Hämmerle, CH; Kolakovic, M; Schmidlin, PR; Stawarczyk, B; Wiegand, A | 1 |
Almeida, MA; Almeida, RC; Carvalho, Fde A; Cevidanes, LH; Leite, MC | 1 |
Inoue, G; Nikaido, T; Sadr, A; Tagami, J; Tsujimoto, M | 1 |
Arshad, N; Bashir, U; Durrani, OK | 1 |
Aguilera, FS; Mannocci, F; Osorio, R; Pashley, DH; Sauro, S; Tay, FR; Toledano, M; Watson, TF | 1 |
De Munck, J; Hanabusa, M; Kuboki, T; Mine, A; Momoi, Y; Van Landuyt, KL; Van Meerbeek, B | 1 |
Cecchin, D; Farina, AP; Garcia, Lda F; Naves, LZ; Pires-de-Souza, Fde C | 1 |
Hayakawa, T; Hirabayashi, S; Yoshida, E | 1 |
Haugen, HJ; Johnsen, GF; Taxt-Lamolle, SF | 1 |
Huang, C; Huang, X; Ouyang, X; Pei, D; Wang, Y; Zhang, J | 1 |
Hiraishi, N; King, NM; Tay, FR; Yiu, CK | 1 |
Gresnigt, MM; Kalk, W; Ozcan, M | 1 |
Osorio, R; Sauro, S; Toledano, M; Watson, TF; Yamauti, M | 2 |
Fok, A; Li, W; Ling, C; Yun, X | 1 |
Dörfer, C; Meyer-Lueckel, H; Müller, WD; Paris, S; Schwendicke, F; Seddig, S | 1 |
Dörfer, C; Keltsch, J; Meyer-Lueckel, H; Paris, S; Schwendicke, F | 1 |
Bauer, J; Carvalho, CN; Gama, AC; Loguercio, AD; Moraes, AG; Yamasaki, LC | 1 |
Bazzocchi, MG; Feitosa, VP; Luzi, AL; Orsini, G; Putignano, A; Sauro, S; Sinhoreti, MA; Watson, TF | 1 |
Bombarda, NH; Loguercio, AD; Luque-Martinez, I; Muñoz, MA; Perdigão, J; Reis, A; Sezinando, A; Szesz, AL | 1 |
Alonso, RC; Araújo, TG; de Araújo, GS; Puppin-Rontani, RM; Sfalcin, RA | 1 |
Akcay, M; Arslan, H; Hatirli, H; Yasa, B; Yasa, E | 1 |
6 trial(s) available for triethylene glycol dimethacrylate and phosphoric acid
Article | Year |
---|---|
Six-month evaluation of adhesives interface created by a hydrophobic adhesive to acid-etched ethanol-wet bonded dentine with simplified dehydration protocols.
Topics: Acid Etching, Dental; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Leakage; Dental Materials; Dentin; Desiccation; Ethanol; Humans; Hydrophobic and Hydrophilic Interactions; Materials Testing; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Silver Staining; Solvents; Stress, Mechanical; Surface Properties; Tensile Strength; Time Factors; Water | 2010 |
Fabrication and evaluation of Bis-GMA/TEGDMA resin with various amounts of silane-coated silica for orthodontic use.
Topics: Acid Etching, Dental; Acrylates; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Debonding; Dental Enamel; Humans; Materials Testing; Orthodontic Brackets; Particle Size; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Shear Strength; Silanes; Silicon Dioxide; Stainless Steel; Stress, Mechanical; Surface Properties; Tooth Fractures | 2012 |
TEM interfacial characterization of an experimental self-adhesive filling material bonded to enamel/dentin.
Topics: Composite Resins; Dental Bonding; Dental Enamel; Dental Leakage; Dental Materials; Dentin; Durapatite; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Transmission; Nanoparticles; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Silver Staining; Smear Layer; Surface Properties; Temperature; Time Factors; Tooth Fractures; Water | 2011 |
Wear model simulating clinical abrasion on composite filling materials.
Topics: Acetophenones; Acid Etching, Dental; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Cavity Preparation; Dental Materials; Dental Polishing; Dental Restoration Wear; Dental Restoration, Permanent; Humans; Incisor; Microscopy, Electron, Scanning; Particle Size; Phosphoric Acids; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Saliva; Silanes; Silicon Dioxide; Spectroscopy, Fourier Transform Infrared; Surface Properties; Temperature; Tooth Abrasion; X-Ray Microtomography; Zirconium | 2011 |
Ethanol-wet bonding may improve root dentine bonding performance of hydrophobic adhesive.
Topics: 4-Aminobenzoic Acid; Acid Etching, Dental; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Leakage; Dentin; Dentin-Bonding Agents; Ethanol; Humans; Hydrophobic and Hydrophilic Interactions; Materials Testing; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Nanotechnology; para-Aminobenzoates; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Shear Strength; Silver Staining; Solvents; Stress, Mechanical; Surface Properties; Time Factors; Tooth Root; Water | 2012 |
Randomized controlled split-mouth clinical trial of direct laminate veneers with two micro-hybrid resin composites.
Topics: Acid Etching, Dental; Adult; Aged; Aged, 80 and over; Bisphenol A-Glycidyl Methacrylate; Color; Composite Resins; Dental Bonding; Dental Enamel; Dental Materials; Dental Prosthesis Design; Dental Restoration Failure; Dental Veneers; Dentin-Bonding Agents; Female; Follow-Up Studies; Humans; Male; Methacrylates; Middle Aged; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Resin Cements; Silanes; Silicon Dioxide; Surface Properties; Survival Analysis; Treatment Outcome | 2012 |
25 other study(ies) available for triethylene glycol dimethacrylate and phosphoric acid
Article | Year |
---|---|
Effect of filler content of restorative resins on retentive strength to acid-conditioned enamel.
Topics: Acid Etching, Dental; Adhesiveness; Analysis of Variance; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Enamel; Humans; Linear Models; Materials Testing; Microscopy, Electron, Scanning; Multivariate Analysis; Oxalates; Oxalic Acid; Particle Size; Phosphoric Acids; Pliability; Polyethylene Glycols; Polymethacrylic Acids; Surface Properties | 1994 |
Effect of phosphoric acid concentration on wet-bonding to etched dentin.
Topics: Acid Etching, Dental; Acrylic Resins; Analysis of Variance; Animals; Cattle; Composite Resins; Dental Bonding; Dental Cements; Dentin; Dentin-Bonding Agents; Materials Testing; Microscopy, Electron, Scanning; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Surface Properties; Tensile Strength; Water | 1996 |
The durability of adhesion to phosphoric acid etched, wet dentin substrates.
Topics: Acid Etching, Dental; Acrylic Resins; Adhesiveness; Analysis of Variance; Animals; Cattle; Collagen; Dental Bonding; Dentin; Dentin-Bonding Agents; Glycine; Materials Testing; Microscopy, Electron, Scanning; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Statistics, Nonparametric; Tensile Strength; Terpenes; Water | 1998 |
The effect of phosphoric acid concentration on resin tag length and bond strength of a photo-cured resin to acid-etched enamel.
Topics: Acid Etching, Dental; Animals; Cattle; Dental Bonding; Dental Enamel; Dental Enamel Permeability; Dose-Response Relationship, Drug; Methacrylates; Microscopy, Electron, Scanning; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Statistics, Nonparametric; Surface Properties; Tensile Strength | 2000 |
Tetrahydrofuran as alternative solvent in dental adhesive systems.
Topics: Acetone; Acid Etching, Dental; Adhesiveness; Animals; Bisphenol A-Glycidyl Methacrylate; Cattle; Composite Resins; Dental Bonding; Dental Materials; Dental Stress Analysis; Dentin-Bonding Agents; Ethanol; Furans; Materials Testing; Methacrylates; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Random Allocation; Resin Cements; Solvents; Stress, Mechanical; Surface Properties; Tensile Strength; Time Factors; Water | 2009 |
Enamel bonding of single-step self-etch adhesives: influence of surface energy characteristics.
Topics: Acid Etching, Dental; Animals; Bisphenol A-Glycidyl Methacrylate; Carbon Compounds, Inorganic; Cattle; Dental Bonding; Dental Enamel; Dentin-Bonding Agents; Hydrocarbons, Iodinated; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Naphthalenes; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Silicon Compounds; Surface Properties; Water; Wettability | 2010 |
Bonding of self-adhesive resin cements to enamel using different surface treatments: bond strength and etching pattern evaluations.
Topics: Acid Etching, Dental; Aluminum Silicates; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Enamel; Dental Etching; Dental Prophylaxis; Dental Stress Analysis; Dentin-Bonding Agents; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Resin Cements; Shear Strength; Stress, Mechanical; Surface Properties; Tricarboxylic Acids | 2010 |
Infiltrants inhibit progression of natural caries lesions in vitro.
Topics: Acid Etching, Dental; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Caries; Dental Enamel; Dental Materials; Disease Progression; Humans; Hydrochloric Acid; Hydrogen-Ion Concentration; Materials Testing; Methacrylates; Microradiography; Minerals; Permeability; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Time Factors; Tooth Demineralization | 2010 |
Adhesive performance of a caries infiltrant on sound and demineralised enamel.
Topics: Acid Etching, Dental; Acrylates; Acrylic Resins; Adhesiveness; Animals; Cattle; Composite Resins; Dental Bonding; Dental Enamel; Dental Materials; Dental Stress Analysis; Ethanol; Hydrochloric Acid; Materials Testing; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Shear Strength; Solvents; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Tooth Demineralization; Water | 2011 |
Efficiency of light-emitting diode and halogen units in reducing residual monomers.
Topics: Acid Etching, Dental; Animals; Bisphenol A-Glycidyl Methacrylate; Cattle; Composite Resins; Curing Lights, Dental; Dental Debonding; Dental Enamel; Materials Testing; Orthodontic Brackets; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Spectrophotometry, Infrared; Surface Properties; Temperature; Time Factors | 2010 |
Ultrastructural observation of the acid-base resistant zone of all-in-one adhesives using three different acid-base challenges.
Topics: Acetic Acid; Acids; Bisphenol A-Glycidyl Methacrylate; Boron Compounds; Calcium Chloride; Composite Resins; Dentin; Dentin-Bonding Agents; Humans; Hydrochloric Acid; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Methylmethacrylates; Microscopy, Electron, Scanning; Phosphates; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Surface Properties; Temperature; Time Factors | 2010 |
Resin-dentin bonds to EDTA-treated vs. acid-etched dentin using ethanol wet-bonding. Part II: Effects of mechanical cycling load on microtensile bond strengths.
Topics: Acid Etching, Dental; Bisphenol A-Glycidyl Methacrylate; Chelating Agents; Composite Resins; Dentin; Dentin-Bonding Agents; Edetic Acid; Ethanol; Humans; Hydrophobic and Hydrophilic Interactions; Light-Curing of Dental Adhesives; Methacrylates; Microscopy, Electron, Scanning; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Solvents; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Water | 2011 |
Bond strength of fibre glass and carbon fibre posts to the root canal walls using different resin cements.
Topics: Acid Etching, Dental; Adhesiveness; Bisphenol A-Glycidyl Methacrylate; Carbon; Carbon Fiber; Cementation; Cuspid; Dental Bonding; Dental Materials; Dental Pulp Cavity; Dental Stress Analysis; Dentin; Epoxy Resins; Glass; Humans; Materials Testing; Microscopy, Electron, Scanning; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Post and Core Technique; Quartz; Resin Cements; Stress, Mechanical; Surface Properties | 2011 |
SEM analysis of microstructure of adhesive interface between resin cement and dentin treated with self-etching primer.
Topics: Acid Etching, Dental; Adhesiveness; Animals; Cattle; Collagen; Composite Resins; Dental Bonding; Dentin; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Resin Cements; Smear Layer; Stress, Mechanical; Surface Properties; Tricarboxylic Acids; Viscosity | 2011 |
Effect of chlorhexidine incorporation into dental adhesive resin on durability of resin-dentin bond.
Topics: Acid Etching, Dental; Bisphenol A-Glycidyl Methacrylate; Chlorhexidine; Composite Resins; Dental Bonding; Dental Materials; Dental Stress Analysis; Dentin; Ethanol; Humans; Hydrogen-Ion Concentration; Hydrophobic and Hydrophilic Interactions; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Saliva, Artificial; Solvents; Stress, Mechanical; Surface Properties; Tensile Strength; Time Factors | 2012 |
Experimental resin cements containing bioactive fillers reduce matrix metalloproteinase-mediated dentin collagen degradation.
Topics: Acid Etching, Dental; Biocompatible Materials; Bisphenol A-Glycidyl Methacrylate; Calcium Compounds; Calcium Phosphates; Ceramics; Collagen; Collagen Type I; Dentin; Edetic Acid; Glass; Humans; Materials Testing; Matrix Metalloproteinase Inhibitors; Matrix Metalloproteinases; Methacrylates; Microscopy, Electron, Scanning; Peptides; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Protective Agents; Resin Cements; Saliva, Artificial; Silicates; Spectrometry, X-Ray Emission; Surface Properties; Time Factors | 2012 |
Effect of artificial aging on the bond durability of fissure sealants.
Topics: Acid Etching, Dental; Animals; Cattle; Composite Resins; Dental Bonding; Dental Enamel; Humans; Light; Materials Testing; Methacrylates; Phosphoric Acids; Pit and Fissure Sealants; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Random Allocation; Resin Cements; Silver Staining; Stress, Mechanical; Temperature; Tensile Strength; Time Factors; Water; X-Ray Microtomography | 2013 |
Micro-hardness and mineral loss of enamel lesions after infiltration with various resins: influence of infiltrant composition and application frequency in vitro.
Topics: Animals; Bisphenol A-Glycidyl Methacrylate; Cattle; Composite Resins; Dental Enamel; Dental Materials; Disease Progression; Ethanol; Hardness; Light-Curing of Dental Adhesives; Microradiography; Minerals; para-Aminobenzoates; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Random Allocation; Resins, Synthetic; Solvents; Surface Properties; Time Factors; Tooth Demineralization | 2013 |
Masking of white spot lesions by resin infiltration in vitro.
Topics: Acid Etching, Dental; Animals; Cattle; Color; Colorimetry; Dental Caries; Dental Enamel; Dental Materials; Dental Polishing; Light-Curing of Dental Adhesives; Methacrylates; Methylmethacrylate; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Random Allocation; Refractometry; Resins, Synthetic; Tea; Time Factors; Tooth Discoloration; Tooth Remineralization; Wine | 2013 |
Properties of composite materials used for bracket bonding.
Topics: Acid Etching, Dental; Adhesiveness; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Cements; Dental Enamel; Dental Stress Analysis; Elastic Modulus; Humans; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Orthodontic Appliances; Phosphoric Acids; Pliability; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Resin Cements; Shear Strength; Stress, Mechanical | 2013 |
Dicalcium phosphate (CaHPO4·2H2O) precipitation through ortho- or meta-phosphoric acid-etching: effects on the durability and nanoleakage/ultra-morphology of resin-dentine interfaces.
Topics: Acid Etching, Dental; Adult; Calcium Phosphates; Chemical Precipitation; Dental Bonding; Dental Leakage; Dental Stress Analysis; Dentin; Dentin-Bonding Agents; Fluorescein-5-isothiocyanate; Fluorescent Dyes; Humans; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Microscopy, Confocal; Phenols; Phosphoric Acids; Phosphorous Acids; Polyethylene Glycols; Polymethacrylic Acids; Spectroscopy, Fourier Transform Infrared; Stress, Mechanical; Sulfoxides; Surface Properties; Tensile Strength; Young Adult | 2013 |
Influence of a hydrophobic resin coating on the bonding efficacy of three universal adhesives.
Topics: Acid Etching, Dental; Acrylates; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Leakage; Dental Materials; Dentin; Humans; Hydrophobic and Hydrophilic Interactions; Materials Testing; Methacrylates; Phosphoric Acids; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Random Allocation; Resin Cements; Temperature; Tensile Strength; Time Factors; Water | 2014 |
Zinc incorporation improves biological activity of beta-tricalcium silicate resin-based cement.
Topics: Acid Etching, Dental; Biocompatible Materials; Bisphenol A-Glycidyl Methacrylate; Calcium Compounds; Calcium Phosphates; Ceramics; Collagen; Collagen Type I; Composite Resins; Dentin; Edetic Acid; Electron Probe Microanalysis; Glass; Humans; Materials Testing; Matrix Metalloproteinase Inhibitors; Methacrylates; Microscopy, Electron, Scanning; Peptides; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Protective Agents; Resin Cements; Saliva, Artificial; Silicates; Time Factors; Zinc Oxide | 2014 |
Bond Strength of Experimental Low-viscosity Resin Materials to Early Enamel Caries Lesions: Effect of Diluent/Solvent Addition.
Topics: Acid Etching, Dental; Composite Resins; Dental Bonding; Dental Caries; Dental Enamel; Dental Materials; Dental Stress Analysis; Ethanol; Humans; Humidity; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Solvents; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors | 2015 |
Effect of novel restorative materials and retention slots on fracture resistance of endodontically-treated teeth.
Topics: Acid Etching, Dental; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Cavity Preparation; Dental Materials; Dental Restoration, Permanent; Glass; Humans; Materials Testing; Methacrylates; Molar; Nanocomposites; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Polymethyl Methacrylate; Polyurethanes; Resin Cements; Stress, Mechanical; Tooth Fractures; Tooth, Nonvital | 2016 |