thiourea and sulfamic-acid

thiourea has been researched along with sulfamic-acid* in 3 studies

Other Studies

3 other study(ies) available for thiourea and sulfamic-acid

ArticleYear
Inhibiting fly ash reactivity by adding N- and S- containing compounds.
    Chemosphere, 2018, Volume: 211

    The inhibitory effect of thiourea (TUA), ammonium thiosulfate (TSA) and amidosulfonic acid (ASA) on the reactivity of fly ash air was investigated using a thermobalance at different heating rates (5, 10 and 20 K min

    Topics: Coal Ash; Incineration; Particulate Matter; Sulfonic Acids; Thiosulfates; Thiourea

2018
Preparation of glycosyl thiourea derivatives from glycosyl azides using sulfamic acid and sodium iodide in one-pot.
    Carbohydrate research, 2016, Nov-03, Volume: 434

    Novel one-pot reaction conditions have been developed for the preparation of glycosyl thiourea derivatives directly from glycosyl azides mediated by a combination of sulfamic acid and sodium iodide. The reaction conditions were clean, non-toxic and the products were isolated in good to excellent yield.

    Topics: Azides; Glycosides; Molecular Structure; Sodium Iodide; Sulfonic Acids; Thiourea

2016
PCDD/Fs' suppression by sulfur-amine/ammonium compounds.
    Chemosphere, 2015, Volume: 123

    Three distinct -S and -NH2 or NH4(+) containing compounds, including ammonium thiosulfate, aminosulfonic acid and thiourea, were studied as polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) inhibitors. All these three -S and -N containing compounds tested show strong suppression of PCDD/Fs formation, especially for thiourea which has not been studied before. With a (S+N)/Cl molar ratio of only 0.47, thiourea could inhibit 97.3% of PCDD/Fs and even 99.8% of I-TEQ. At an unusually high de novo test temperature (650 °C), the PCDD/Fs' formation was still very low but also the inhibition capacity of thiourea was weak, with an efficiency of 59% for PCDD/Fs when with a (S+N)/Cl molar ratio of 1.40. The results also revealed that the inhibition capability of the combined -S/-NH2 or -S/NH4(+) suppressant was strongly influenced by both the nature of the functional group of nitrogen and the value of the molar ratio (S+N)/Cl. The amine functional group -NH2 tends to be more efficient than ammonium NH4(+) and within a certain range a higher (S+N)/Cl value leads to a higher inhibition efficiency. Moreover, the emission of gases was continuously monitored: the Gasmet results revealed that SO2, HCN and NH3 were the most important decomposition products of thiourea. Thiourea is non-toxic, environment-friendly and can be sprayed into the post-combustion zone in form of powder or aqueous solution. The cost of thiourea at least can be partially compensated by its high inhibition efficiency. Therefore, the application of thiourea in a full-scale incinerator system is promising and encouraging.

    Topics: Benzofurans; Dioxins; Environmental Pollutants; Refuse Disposal; Sulfonic Acids; Thiosulfates; Thiourea

2015