tellurium has been researched along with titanium-dioxide* in 18 studies
18 other study(ies) available for tellurium and titanium-dioxide
Article | Year |
---|---|
A Branched Rutile/Anatase Phase Structure Electrode with Enhanced Electron-Hole Separation for High-Performance Photoelectrochemical DNA Biosensor.
A photoelectrochemical (PEC) detection platform was built based on the branched rutile/anatase titanium dioxide (RA-TiO Topics: Biosensing Techniques; Cadmium Compounds; DNA; Electrochemical Techniques; Electrodes; Electrons; Limit of Detection; Quantum Dots; Tellurium | 2023 |
Fully automated process for histamine detection based on magnetic separation and fluorescence detection.
To ensure food safety and to prevent unnecessary foodborne complications this study reports fast, fully automated process for histamine determination. This method is based on magnetic separation of histamine with magnetic particles and quantification by the fluorescence intensity change of MSA modified CdSe Quantum dots. Formation of Fe Topics: Cadmium Compounds; Ferric Compounds; Fluorescence; Fluorescent Dyes; Food Contamination; Histamine; Limit of Detection; Magnetic Phenomena; Metal Nanoparticles; Quantum Dots; Silanes; Spectrometry, Fluorescence; Tellurium; Titanium; Wine | 2020 |
The minimum inhibitory concentration (MIC) assay with Escherichia coli: An early tier in the environmental hazard assessment of nanomaterials?
There are now over a thousand nano-containing products on the market and the antibacterial properties of some nanomaterials has created interest in their use as cleaning agents, biocides and disinfectants. Engineered nanomaterials (ENMs) are being released into the environment and this raises concerns about their effects on microbes in the receiving ecosystems. This study evaluated the bacterial toxicity of a wide range of nanomaterials with different surface coatings on Escherichia coli K-12 MG1655. The minimum inhibitory concentration (MIC) assay, which quantifies the threshold for growth inhibition in suspensions of bacteria, was used to rank the toxicity of silver (Ag), cupric oxide (CuO), cadmium telluride (CdTe) quantum dots, titanium dioxide (TiO Topics: Anti-Bacterial Agents; Biological Assay; Cadmium Compounds; Copper; Escherichia coli; Microbial Sensitivity Tests; Nanostructures; Nanotubes, Carbon; Particle Size; Quantum Dots; Reproducibility of Results; Silver; Tellurium; Titanium | 2018 |
Enhanced Photoelectrochemical Proximity Assay for Highly Selective Protein Detection in Biological Matrixes.
This work proposes the first photoelectrochemical proximity assay (PECPA) method via the sensitization of CdTe quantum dots (QDs) on photoelectrochemical response of ITO/TiO2/CdS electrode for highly selective and sensitive detection of proteins. This detection was performed on a sensing interface formed via the hybridization of capture DNA immobilized on ITO/TiO2/CdS electrode with labeled antibody-DNA (DNA-Ab1). Upon the recognition of Ab1 to target protein, the immunocomplex of DNA-Ab1, target, and the detection antibody-DNA (DNA-Ab2) was formed, which led to the proximity hybridization of the DNA in DNA-Ab2, capture DNA, and signal DNA-CdTe QDs, and brought CdTe QDs to the ITO/TiO2/CdS electrode to produce a sensitized photocurrent. The photocurrent intensity increased with the increasing concentration of the specific target protein. Using insulin as a target, this sensitized method showed a detectable range of 10 fM to 10 nM and a detection limit of 3.0 fM without the need of a washing step. It possessed high selectivity and good accuracy for detection of proteins in biological matrixes. This method is extremely flexible and can be extended to varieties of protein targets. Topics: Antibodies; Cadmium Compounds; Electrochemical Techniques; Electrodes; Immobilized Nucleic Acids; Immunoassay; Insulin; Limit of Detection; Nucleic Acid Hybridization; Quantum Dots; Tellurium; Tin Compounds; Titanium | 2016 |
A 3D co-culture microtissue model of the human placenta for nanotoxicity assessment.
There is increasing evidence that certain nanoparticles (NPs) can overcome the placental barrier, raising concerns on potential adverse effects on the growing fetus. But even in the absence of placental transfer, NPs may pose a risk to proper fetal development if they interfere with the viability and functionality of the placental tissue. The effects of NPs on the human placenta are not well studied or understood, and predictive in vitro placenta models to achieve mechanistic insights on NP-placenta interactions are essentially lacking. Using the scaffold-free hanging drop technology, we developed a well-organized and highly reproducible 3D co-culture microtissue (MT) model consisting of a core of placental fibroblasts surrounded by a trophoblast cell layer, which resembles the structure of the in vivo placental tissue. We could show that secretion levels of human chorionic gonadotropin (hCG) were significantly higher in 3D than in 2D cell cultures, which indicates an enhanced differentiation of trophoblasts grown on 3D MTs. NP toxicity assessment revealed that cadmium telluride (CdTe) and copper oxide (CuO) NPs but not titanium dioxide (TiO Topics: Cadmium Compounds; Chorionic Gonadotropin; Coculture Techniques; Copper; Female; Fibroblasts; Humans; Metal Nanoparticles; Placenta; Pregnancy; Tellurium; Titanium; Trophoblasts | 2016 |
Quantum dots based potential-resolution dual-targets electrochemiluminescent immunosensor for subtype of tumor marker and its serological evaluation.
The identification of subtypes of known tumor markers is of great importance for clinical diagnosis but still a great challenge in novel detection methodologies with simple operation and acceptable sensitivity. This work for the first time reported a quantum dots (QDs) based potential-resolved electrochemiluminescent (ECL) immunosensor to realize simultaneous detection of dual targets. Because of different surface microstructures, dimercaptosuccinic acid stabilized CdTe (DMSA-CdTe) QDs and TiO2 nanoparticles-glutathione stabilized CdTe (TiO2-GSH-CdTe) QDs composites showed a large difference of ECL peak potential (∼360 mV), which provided an access for potential-resolution detection. The ECL emission on indium tin oxide electrodes showed consistent strength during the cyclic scan, and intensity data were collected at -0.89 V and -1.25 V (vs Ag/AgCl) for DMSA-CdTe QDs and TiO2-GSH-CdTe QDs composites, respectively. The interface modification procedures of immunosensor construction were characterized by atomic force microscopy. The portion of Lens culinaris lectin affiliated isoform of alpha fetoprotein (AFP), AFP-L3%, in total AFP, is recently a novel criteria showing even higher sensitivity and specificity than AFP at the early stage of cancer. Combined with the enzyme cyclic amplification strategy, linear ranges for AFP-L3 and AFP dual-targets detection were 3.24 pg mL(-1)-32.4 ng mL(-1) and 1.0 pg mL(-1)-20 ng mL(-1), with limits of detection of 3.24 pg mL(-1) and 1.0 pg mL(-1), respectively. Compared with clinical detection data, the calculated portion of AFP-L3% by as-prepared immunosensor showed acceptable accuracy. These results open a new avenue for facile and rapid multiple-components detection based on the nano-ECL technique and provide a new clinical diagnosis platform for HCC. Topics: alpha-Fetoproteins; Antibodies, Immobilized; Biomarkers, Tumor; Biosensing Techniques; Blood Chemical Analysis; Cadmium Compounds; Electrochemistry; Electrodes; Glutathione; Humans; Immunoassay; Limit of Detection; Luminescent Measurements; Protein Isoforms; Quantum Dots; Reproducibility of Results; Tellurium; Titanium | 2015 |
Cadmium Telluride-Titanium Dioxide Nanocomposite for Photodegradation of Organic Substance.
Cadmium telluride-titanium dioxide nanocomposite was prepared by hydrothermal reaction of sol-gel derived titanium dioxide and organically modified cadmium telluride. The crystallinity of titanium dioxide in the nanocomposite was higher than that of pure titanium dioxide obtained by the reaction under the same temperature and pressure conditions, showing that cadmium telluride induced the crystallization of titanium dioxide. Diffuse reflectance spectrum of the nanocomposite showed the higher absorption efficiency in the UV-visible region due to band-gap excitation of titanium dioxide. The nanocomposite significantly showed the improvement of photocatalytic activity for 4-chlorophenol with UV light. Topics: Cadmium Compounds; Catalysis; Chlorophenols; Nanocomposites; Photolysis; Tellurium; Titanium; Ultraviolet Rays | 2015 |
Enhanced photoelectrochemical strategy for ultrasensitive DNA detection based on two different sizes of CdTe quantum dots cosensitized TiO2/CdS:Mn hybrid structure.
A TiO2/CdS:Mn hybrid structure cosensitized with two different sizes of CdTe quantum dots (QDs) was designed to develop a novel and ultrasensitive photoelectrochemical DNA assay. In this protocol, TiO2/CdS:Mn hybrid structure was prepared by successive adsorption and reaction of Cd(2+)/Mn(2+) and S(2-) ions on the surface of TiO2 film and then was employed as matrix for immobilization of hairpin DNA probe, whereas large-sized CdTe-COOH QDs and small-sized CdTe-NH2 QDs as signal amplification elements were successively labeled on the terminal of hairpin DNA probe. The target DNA detection was based upon the photocurrent change originated from conformation change of the hairpin DNA probe after hybridization with target DNA. In the absence of target DNA, the immobilized DNA probe was in the hairpin form and the anchored different sizes of CdTe-COOH and CdTe-NH2 QDs were close to the TiO2/CdS:Mn electrode surface, which led to a very strong photocurrent intensity because of the formation of the cosensitized structure. However, in the presence of target DNA, the hairpin DNA probe hybridized with target DNA and changed into a more rigid, rodlike double helix, which forced the multianchored CdTe QDs away from the TiO2/CdS:Mn electrode surface, resulting in significantly decreased photocurrent intensity because of the vanished cosensitization effect. By using this cosensitization signal amplification strategy, the proposed DNA assay could offer an ultrasensitive and specific detection of DNA down to 27 aM, and it opened up a new promising platform to detect various DNA targets at ultralow levels for early diagnoses of different diseases. Topics: Biosensing Techniques; Cadmium Compounds; DNA; Electrochemical Techniques; Limit of Detection; Manganese; Microscopy, Electron, Transmission; Photochemical Processes; Quantum Dots; Sulfides; Tellurium; Titanium | 2014 |
CdTe-TiO2 nanocomposite: an impeder of bacterial growth and biofilm.
The resurgence of infectious diseases and associated issues related to antibiotic resistance has raised enormous challenges which may possibly be confronted primarily by nanotechnology routes. One key need of critical significance in this context is the development of an agent capable of inhibiting quorum sensing mediated biofilm formation in pathogenic organisms. In this work we examine the possible use of a nanocomposite, CdTe-TiO2, as an impeder of growth and biofilm. In the presence of CdTe-TiO2, scanning electron microscopy (SEM) analysis shows exposed cells without the surrounding matrix. Confocal laser scanning microscopy shows spatially distributed fluorescence, a typical indication of an impeded biofilm, as opposed to the control which shows matrix-covered cells and continuous fluorescence, typical of biofilm formation. Quantitatively, the inhibition of biofilm was ∼57%. CdTe-TiO2 also exhibits good antibacterial properties against Gram positive and Gram negative organisms by virtue of the generation of reactive oxygen species inside the cells, reflected by a ruptured appearance in the SEM analysis. Topics: Anti-Bacterial Agents; Bacillus subtilis; Bacterial Infections; Biofilms; Cadmium Compounds; Escherichia coli; Humans; Nanocomposites; Pseudomonas aeruginosa; Quantum Dots; Quorum Sensing; Tellurium; Titanium | 2013 |
Near infrared absorption of CdSe(x)Te(1-x) alloyed quantum dot sensitized solar cells with more than 6% efficiency and high stability.
CdSe0.45Te0.55 alloyed quantum dots (QDs) with excitonic absorption onset at 800 nm and particle size of 5.2 nm were prepared via a noninjection high-temperature pyrolysis route and used as a sensitizer in solar cells. A postsynthesis assembly approach with use of bifunctional linker molecule mercaptopropionic acid (MPA) capped water-soluble QDs, obtained via ex situ ligand exchange from the initial oil-dispersible QDs, was adopted for tethering QDs onto mesoporous TiO2 film. With the combination of high loading of the QD sensitizer and intrinsic superior optoelectronic properties (wide absorption range, high conduction band edge, high chemical stability, etc., relative to their constituents CdSe and CdTe) of the adopted CdSe0.45Te0.55 QD sensitizer, the resulting CdSexTe1-x alloyed QD-based solar cells exhibit a record conversion efficiency of 6.36% (Jsc = 19.35 mA/cm(2), Voc = 0.571 V, FF = 0.575) under full 1 sun illumination, which is remarkably better than that of the reference CdSe and CdTe QD based ones. Furthermore, the solar cells with Cu2S counter electrodes based on eletrodeposition of Cu on conductive glass show long-term (more than 500 h) stability. Topics: Absorption; Alloys; Cadmium Compounds; Electric Power Supplies; Electrodes; Quantum Dots; Selenium Compounds; Solar Energy; Tellurium; Titanium | 2013 |
Label-free photoelectrochemical immunosensor based on CdTe/CdS co-sensitized TiO2 nanotube array structure for octachlorostyrene detection.
An octachlorostyrene (OCS) photoelectrochemical (PEC) immunosensor was developed by cross-linking anti-OCS antibody onto a CdTe/CdS-sensitized TiO2 nanotube arrays (NTAs). The anti-OCS polyclonal antibody was developed in rabbit as a result of immunization with BSA-OCS hapten conjugate. TiO2 NTAs were immobilized firstly with hydrothermally synthesized CdTe quantum dots (QDs), and then CdS which filled the spaces within the CdTe-TiO2 composite and encapsulated the CdTe QDs, forming an ideal stepwise bandedge structure, which benefited the light harvesting. The PEC immunosensor therefore shows high specificity and high sensitivity with a limit of detection of 2.58 pM, and a linear range from 5 pM to 50 nM. The testing time is 4 min. The analysis of river water reveals that the proposed sensor can be applied in the analysis of OCS in real water samples without complicated pre-treatments. Topics: Animals; Cadmium Compounds; Electrochemical Techniques; Environmental Monitoring; Equipment Design; Immunoassay; Limit of Detection; Nanotubes; Quantum Dots; Rabbits; Rivers; Styrenes; Sulfides; Tellurium; Titanium; Water Pollutants, Chemical | 2013 |
Binding energy of D(0) and D(-) impurity centers in CdTe/ZnTe spherical quantum dot.
Binding energy of neutral (D(0)) and negatively charged (D(-)) hydrogenic impurity located at the center of the CdTe/ZnTe spherical quantum dot has been investigated. Calculations are performed under the effective mass approximation on the basis of exact solution of the Schrödinger and Poisson equations. Eigenfunctions are expressed in terms of the Whittaker and Coulomb wave functions. Calculated results show that D(0) and D(-) impurity binding energies of ground 1s, 1S(1s2) and 2p, 3P(1s2p) excited states strongly depend on CdTe/ZnTe QD size if QD radius is less than one effective Bohr radius. Topics: Cadmium Compounds; Energy Transfer; Models, Chemical; Nanospheres; Particle Size; Quantum Dots; Tellurium; Titanium; Zinc | 2012 |
Amplified quenching of electrochemiluminescence from CdS sensitized TiO2 nanotubes by CdTe-carbon nanotube composite for detection of prostate protein antigen in serum.
This work reports an ECL immunoassay method for ultrasensitive detection of prostate protein antigen (PSA), by remarkably efficient energy-transfer induced electrochemiluminescence (ECL) quenching from the CdS nanoparticles (NPs) sensitized TiO(2) nanotube array (CdS-TiO(2) NTs) to the activated CdTe NPs functionalized multi-wall carbon nanotubes (CdTe-MWNTs) composite. The coupling of TiO(2) and CdS NPs results in a cathodic ECL intensity 14.7 times stronger than that of the pure TiO(2) NTs electrode, which could be efficiently quenched by the CdTe-MWNTs. The enhanced mechanism of TiO(2) NTs ECL by CdS NPs was studied in detail by cyclic voltammetry and ECL spectroscopy. The strong absorption of the CdTe-MWNTs in the wavelength range of 400-800 nm renders them highly efficient for ECL quenching labeled on anti-PSA antibody. Based on a sandwich structure, we developed an ECL immunoassay method for the sensitive and selective detection of PSA. The ECL intensity decrement was logarithmically related to the concentration of the PSA in the range of 1.0 fg mL(-1) to 10 pg mL(-1) with a detection limit of 1 fg mL(-1). Human serum samples were then tested using the proposed immunoassay with excellent correlations, suggesting that the proposed immunoassay method is of great promise in clinical screening of cancer biomarkers. Topics: Antigens; Cadmium Compounds; Electrochemical Techniques; Humans; Male; Microscopy, Electron, Transmission; Nanotubes, Carbon; Prostate; Sulfides; Tellurium; Titanium | 2012 |
CdS and CdTeS quantum dot decorated TiO2 nanowires. Synthesis and photoefficiency.
An easy process was developed to synthesize TiO(2) nanowires sensitized with CdS and CdTeS quantum dots (QDs) requiring no pretreatment of the TiO(2) nanowires prior to nanoparticle generation. CdS and CdTeS nanoparticles were firstly grown by an in situ colloidal method directly onto the TiO(2) surface, hence not requiring subsequent functionalization of the QDs. The resulting nanostructure assembly and composition was confirmed by transmission electron microscopy (TEM), x-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. Successful decoration of the TiO(2) nanowires by the QDs was observed by TEM, while XPS spectra provided clear evidence for the coexistence of CdS and CdTeS QDs and TiO(2) nanowires. The electronic structure of the TiO(2) nanowires was preserved as indicated by Raman spectroscopy. Preliminary photocurrent measurements showed that inclusion of Te in CdS QDs improved the photocurrent efficiency. Compared to bare TiO(2) nanowires, CdS/TiO(2) nanoassemblies showed an enhancement in photocurrent efficiency of 300% while CdTeS/TiO(2) presented an improvement of 350%. This study indicates that the generation of strongly anchored CdS and CdTeS QDs on a TiO(2) nanowire surface is achievable without introduction of a linker molecule, whose presence is known to decrease the electron injection efficiency. Topics: Cadmium Compounds; Nanowires; Particle Size; Photochemical Processes; Quantum Dots; Spectrum Analysis, Raman; Sulfides; Tellurium; Titanium; X-Ray Diffraction | 2011 |
Photoelectrochemical detection of pentachlorophenol with a multiple hybrid CdSe(x)Te(1-x)/TiO2 nanotube structure-based label-free immunosensor.
Driven by the urgent demand of detecting trace amounts of pentachlorophenol (PCP) in contaminative water, a label-free immunosensor with ultra sensitivity and high selectivity was constructed based on a hybrid CdSe(x)Te(1-x) (0 ≤ x ≤ 1) nanocrystal (NCs)-modified TiO(2) nanotube (NT) arrays for the first time. The CdSe(x)Te(1-x) NCs were photoelectrodeposited on inner and outer space of the TiO(2) NTs, leading to high photoelectrical conversion efficiency in the visible region. PCP antibodies are covalently conjugated on the TiO(2) NTs due to the large surface area and good biocompatibility. Since the photocurrent is highly dependent on the TiO(2) surface properties, the specific interaction between PCP and the antibodies results in a sensitive change in the photocurrent, with a limit of detection (LOD) of 1 pM. High sensor-to-sensor reproducibility is achieved. The sensor was applied for the direct analysis of river water samples. Topics: Antibodies, Immobilized; Biosensing Techniques; Cadmium Compounds; Electrochemical Techniques; Immunoassay; Nanotubes; Pentachlorophenol; Selenium Compounds; Tellurium; Titanium; Water Pollutants, Chemical | 2010 |
Reflection of plane elastic waves in tetragonal crystals with strong anisotropy.
Propagation and reflection of plane elastic waves in the acousto-optic crystals tellurium dioxide, rutile, barium titanate, and mercury halides are examined in the paper. The reflection from a free and flat boundary separating the crystals and the vacuum is investigated in the (001) planes in the case of glancing acoustic incidence on the boundary. The analysis shows that two bulk elastic waves may be reflected from the crystal surface. The energy flow of one of the reflected waves in paratellurite and in the mercury compounds propagates in a quasi-back-direction with respect to the incident energy flow. It is proved that energy flows of the incident and reflected elastic waves are separated by a narrow angle of only a few degrees. It is also found that the relative intensity of the unusually reflected waves is close to a unit in a wide variety of crystal cuts. General conclusions related to acoustic propagation and reflection in crystals have been made based on the examined phenomena in the materials. Topics: Anisotropy; Barium Compounds; Crystallization; Elasticity; Energy Transfer; Halogens; Mercury Compounds; Models, Theoretical; Molecular Structure; Motion; Tellurium; Titanium; Ultrasonics; Vacuum | 2009 |
Wafer-scale patterning of lead telluride nanowires: structure, characterization, and electrical properties.
Nanowires of lead telluride (PbTe) were patterned on glass surfaces using lithographically patterned nanowire electrodeposition (LPNE). LPNE involved the fabrication by photolithography of a contoured nickel nanoband that is recessed by approximately 300 nm into a horizontal photoresist trench. Cubic PbTe was then electrodeposited from a basic aqueous solution containing Pb(2+) and TeO(3)(2-) at the nickel nanoband using a cyclic deposition/stripping potential program in which lead-rich PbTe was first deposited in a negative-going potential scan and excess lead was then anodically stripped from the nascent nanowire by scanning in the positive direction to produce near stoichiometric PbTe. Repeating this scanning procedure permitted PbTe nanowires 60-400 nm in width to be obtained. The wire height was controlled over the range of 20-100 nm based upon the nickel film thickness. Nanowires with lengths exceeding 1 cm were prepared in this study. We report the characterization of these nanowires using X-ray diffraction, transmission electron microscopy and electron diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy (XPS). The surface chemical composition of PbTe nanowires was monitored by XPS as a function of time during the exposure of these nanowires to laboratory air. One to two monolayers of a mixed Pb and Te oxide are formed during a 24 h exposure. The electrical conductivity of PbTe nanowires was strongly affected by air oxidation, declining from an initial value of 2.0(+/-1.5) x 10 (4) S/m by 61% (for nanowires with a 20 nm thickness), 55% (for 40 nm), and 12% (for 60 nm). Topics: Crystallization; Electric Conductivity; Lead; Macromolecular Substances; Materials Testing; Molecular Conformation; Nanotechnology; Nanotubes; Particle Size; Surface Properties; Tellurium; Titanium | 2009 |
Fluorescent II-VI semiconductor quantum dots in living cells: nonlinear microspectroscopy in an optical tweezers system.
In this work we used a setup consisting of an optical tweezers combined with a nonlinear microspectroscopy system to perform scanning microscopy and obtain emission spectra using two photon excited (TPE) luminescence of captured single living cells labeled with core-shell fluorescent semiconductor quantum dots (QDs). The QDs were obtained via colloidal synthesis in aqueous medium with an adequate physiological resulting pH. Sodium polyphosphate was used as the stabilizing agent. The results obtained show the potential presented by this system as well as by these II-VI fluorescent semiconductor quantum dots to perform spectroscopy in living trapped cells in any neighborhood and dynamically observe the cell chemical reactions in real time. Topics: Animals; Cadmium Compounds; Macrophages, Peritoneal; Mice; Mice, Inbred BALB C; Microscopy, Confocal; Microspectrophotometry; Optical Tweezers; Quantum Dots; Selenium Compounds; Silicon; Spectrometry, Fluorescence; Spectrum Analysis, Raman; Sulfides; Tellurium; Titanium; Zinc Compounds | 2008 |