tellurium has been researched along with 11-mercaptoundecanoic-acid* in 3 studies
3 other study(ies) available for tellurium and 11-mercaptoundecanoic-acid
Article | Year |
---|---|
Dilution destabilizes engineered ligand-coated nanoparticles in aqueous suspensions.
It is commonly true that a diluted colloidal suspension is more stable over time than a concentrated one because dilution reduces collision rates of the particles and therefore delays the formation of aggregates. However, this generalization does not apply for some engineered ligand-coated nanoparticles (NPs). We observed the opposite relationship between stability and concentration of NPs. We tested 4 different types of NPs: CdSe-11-mercaptoundecanoic acid, CdTe-polyelectrolytes, Ag-citrate, and Ag-polyvinylpyrrolidone. The results showed that dilution alone induced aggregation and subsequent sedimentation of the NPs that were originally monodispersed at very high concentrations. Increased dilution caused NPs to progressively become unstable in the suspensions. The extent of the dilution impact on the stability of NPs is different for different types of NPs. We hypothesize that the unavoidable decrease in free ligand concentration in the aqueous phase following dilution causes detachment of ligands from the suspended NP cores. The ligands attached to NP core surfaces must generally approach exchange equilibrium with free ligands in the aqueous phase; therefore, ligand detachment and destabilization are expected consequences of dilution. More studies are necessary to test this hypothesis. Because the stability of NPs determines their physicochemical and kinetic behavior including toxicity, dilution-induced instability needs to be understood to realistically predict the behavior of engineered ligand-coated NPs in aqueous systems. Environ Toxicol Chem 2018;37:1301-1308. © 2018 SETAC. Topics: Cadmium Compounds; Dynamic Light Scattering; Fatty Acids; Filtration; Hydrodynamics; Ligands; Metal Nanoparticles; Nanotechnology; Quantum Dots; Silver; Sulfhydryl Compounds; Suspensions; Tellurium; Time Factors | 2018 |
Design and preparation of quantum dots fluorescent probes for in situ identification of Microthrix parvicella in bulking sludge.
A series of quantum dots (QDs) fluorescent probes for the in situ identification of Microthrix parvicella (M. parvicella) in bulking sludge were designed and prepared. In the preparation of CdTe/CdS QDs, the 11-mercaptoundecanoic acid (11-acid) and 16-mercaptohexadecanoic acid (16-acid) were used as the stabilizer. The prepared QDs probes were characterized by Fourier transform infrared (FT-IR), X-ray diffraction (XRD), and transmission electron microscopy (TEM), and the results showed that the CdTe/CdS QDs formed a core-shell structure and the long carbon chain was successfully grafted onto its surface. And the three QDs probes had different crystallinity and particle size, which was due to the inhibition effect of long carbon chain. The optical properties test results showed that although the formed core-shell structure and long carbon chain affected the fluorescent intensity, adsorption, and emission spectra of the QDs probes, the probes B and C had a large stokes-shift of 82 and 101 nm, which was a benefit for their fluorescent labeling property. In the fluorescent identification of M. parvicella, the probes B and C effectively adsorbed onto the surface of M. parvicella through a hydrophobic bond, and then identified M. parvicella by their unique fluorescence. In addition, it was found that a better hydrophobic property resulted in better identification efficiency. Topics: Actinobacteria; Crystallization; Fatty Acids; Fluorescent Dyes; Hydrophobic and Hydrophilic Interactions; In Situ Hybridization, Fluorescence; Microscopy, Electron, Transmission; Palmitic Acids; Particle Size; Quantum Dots; Sewage; Spectroscopy, Fourier Transform Infrared; Sulfhydryl Compounds; Tellurium; X-Ray Diffraction | 2016 |
Ultrasensitive Pb2+ detection based on fluorescence resonance energy transfer (FRET) between quantum dots and gold nanoparticles.
Positively charged CdTe-QDs capped with cysteamine (CA-CdTe-QDs) and negatively charged AuNPs capped with 11-mercaptoundecanoic acid (MUA-AuNPs) have been prepared. They are water-soluble and biocompatible. An assay for the determination of Pb2+ has been proposed based on the modulation in FRET efficiency between QDs and AuNPs in the presence of Pb2+, which inhibits the interaction of the QD-AuNP assembly. This method is easy to operate and with remarkably high sensitivity. Under the optimum conditions, the response is linearly proportional to the concentration of Pb2+ in the range 0.22-4.51 ppm, and the detection limit is found to be 30 ppb of Pb2+ due to the superior fluorescence properties of QDs. The mechanism of this strategy is also discussed. Topics: Absorption; Cadmium Compounds; Cysteamine; Fatty Acids; Fluorescence Resonance Energy Transfer; Gold; Hydrogen-Ion Concentration; Lead; Metal Nanoparticles; Microscopy, Electron, Transmission; Quantum Dots; Static Electricity; Sulfhydryl Compounds; Tellurium | 2009 |