tannins and sulfuric-acid

Chitosan is a well-known excellent adsorbent for a number of organics and metal ions, but its mechanical properties and specific gravity should be enhanced for practical operation. In this study, activated clay was added in chitosan slurry to prepare composite beads. The adsorption isotherms and kinetics of two organic acids (tannic acid, humic acid) and two dyes (methylene blue, reactive dye RR222) using composite beads, activated clay, and chitosan beads were compared. With composite beads as an adsorbent, all the isotherms were better fitted by the Freundlich equation. The adsorption capacities with composite beads were generally comparable to those with chitosan beads but much larger than those with activated clay. The pseudo-first-order and pseudo-second-order equations were then screened to describe the adsorption processes. It was shown that the adsorption of larger molecules such as tannic acid (MW, 1700 g mol(-1)), humic acid, and RR222 from water onto composite beads was better described by the pseudo-first-order kinetic model. The rate parameters of the intraparticle diffusion model for adsorption onto such adsorbents were also evaluated and compared to identify the adsorption mechanisms.

Topics: Adsorption; Algorithms; Aluminum Silicates; Chitosan; Clay; Coloring Agents; Hot Temperature; Humic Substances; Kinetics; Methylene Blue; Sulfuric Acids; Tannins; Water Pollutants, Chemical; Water Purification

A widely used method for analyzing hydrolyzable tannins afer reaction with KIO(3) has been modified to include a methanolysis step followed by oxidation with KIO(3). In the new method, hydrolyzable tannins (gallotannins and ellagitannins) are reacted at 85 degrees C for 20 h in methanol/sulfuric acid to quantitatively release methyl gallate. Dried plant samples can be methanolyzed under the same conditions to convert hydrolyzable tannins to methyl gallate. Oxidation of the methyl gallate by KIO(3) at pH 5.5, 30 degrees C, forms a chromophore with lambda(max) 525 nm, which is determined spectrophotometrically. The detection limit of the method is 1.5 microg of methyl gallate, and with plant samples, relative standard deviations of less than 3% were obtained.

Topics: Chromatography, High Pressure Liquid; Gallic Acid; Hydrolysis; Hydrolyzable Tannins; Iodates; Methanol; Oxidation-Reduction; Plants, Edible; Potassium Compounds; Spectrophotometry; Sulfuric Acids; Tannins

Proanthocyanidins (condensed tannins) frequently need to be quantified in large numbers of samples in food, plant, and environmental studies. An automated colorimetric method to quantify proanthocyanidins with sulfuric acid (H(2)SO(4)) was therefore developed for use in a continuous flow analyzer. Assay conditions were optimized using 50% methanol extracts of paper birch, sugar maple, and quaking aspen leaves. Short extraction times and centrifugation of samples prevented proanthocyanidin degradation that otherwise occurred in 50% methanol extracts of aspen leaves. Extraction of birch and maple proanthocyanidins with 50% methanol was comparable to or better than that with 70% acetone. Proanthocyanidin levels in aspen were lower when extracted with aqueous methanol, but relative differences among samples were consistent with those found in aqueous acetone extracts. Results from the automated sulfuric acid assay were highly correlated with those of the conventional BuOH-HCl method for proanthocyanidins and, except for birch, with the Folin--Denis assay for total phenolics. This new technique significantly improves assay processing rate and repeatability compared to conventional colorimetric proanthocyanidin assays.

Topics: Anthocyanins; Antioxidants; Colorimetry; Plant Extracts; Proanthocyanidins; Sulfuric Acids; Tannins; Trees