sirolimus and caprolactone

sirolimus has been researched along with caprolactone* in 2 studies

Other Studies

2 other study(ies) available for sirolimus and caprolactone

ArticleYear
Optimized polymer coating for magnesium alloy-based bioresorbable scaffolds for long-lasting drug release and corrosion resistance.
    Colloids and surfaces. B, Biointerfaces, 2018, Mar-01, Volume: 163

    Magnesium (Mg) alloy-based bioresorbable scaffolds (BRSs) are attracting interest as next-generation stents. However, because medical Mg alloy materials degrade relatively quickly in physiological media, surface corrosion protection via biodegradable polymer coatings is important for clinical applications. Herein, the influence of biodegradable polymer coatings on the BRS corrosion was investigated. First, elution of the drug sirolimus (SRL) from various biodegradable polymers was estimated, including poly(d,l-lactic acid) (PDLLA), poly(d,l-lactic acid-co-ε-caprolactone) (PLCL) and poly(ε-caprolactone) (PCL). Among these, the PDLLA polymer exhibited the slowest release and the best character as a drug reservoir because of its slow degradation rate and semi-glass state in a biological environment. However, the corrosion rate of the PDLLA-coated Mg alloy (AZ31)-based platform was as rapid as the non-coated platform, while critical defects, cracking and desorption were observed in the PDLLA layer. Coatings comprising PCL and PLCL exhibited a prolonged platform corrosion resistance compared with that of PDLLA. To combine the advantages of each polymer, therefore, a pre-coating of PCL or PLCL was applied to the interface between the platform and the external SRL-loaded PDLLA layer. This layering exhibited an enhanced platform corrosion resistance, and will be an important foundational procedure for the development of a coronary scaffold comprising magnesium alloys.

    Topics: Absorbable Implants; Alloys; Antibiotics, Antineoplastic; Caproates; Coated Materials, Biocompatible; Corrosion; Delayed-Action Preparations; Drug Liberation; Drug-Eluting Stents; Kinetics; Lactones; Magnesium; Polyesters; Sirolimus

2018
In vitro and in vivo characterization of novel biodegradable polymers for application as drug-eluting stent coatings.
    Journal of biomaterials science. Polymer edition, 2010, Volume: 21, Issue:4

    We have used a series of in vitro and in vivo tests to assess the suitability of two new degradable polymers for application as coatings for drug-eluting stents. The first is a family of urethane-linked multi-block copolymers (MBCP) that comprise blocks of lactide, glycolide, epsilon-caprolactone and/or poly(ethylene glycol) chain-extended with 1,4-butanediisocyanate (SynBiosys polymers). The second is a family of maltodextrin (MD) modified with fatty acid sidechains to yield a hydrophobic polymer (Eureka() SOLO polymers). We coated stainless-steel stents with two representative urethane-linked MBCPs and one hydrophobic MD polymer alone or in combination with the anti-restenotic drug sirolimus. Urethane-linked MBCPs formed uniform coatings on the stent substrates, withstood crimping and expansion on balloon catheters, completely released sirolimus from the coating within 30 days, and degraded within 30-60 days in PBS. The hydrophobic MD polymer formed uniform coatings, exhibited somewhat slower release of sirolimus (approx. 85% within 30 days), degraded within 60 days in PBS when sirolimus was incorporated in the coating, but showed very slow degradation in the absence of drug. We implanted stents coated with urethane-linked MBCPs or hydrophobic MD polymers in a porcine coronary artery model and used histological analysis at 28- and 90-day end-points to assess the biological response to the materials. Measures of stenosis and inflammation for urethane-linked MBCP and hydrophobic MD polymer coatings were not statistically different from bare metal controls at 28 and 90 days, suggesting that the polymers show good vascular biocompatibility. Endothelialization was nearly complete at 28 days and complete at 90 days for all formulations. Urethane-linked MBCP polymer-only and drug-eluting coatings and hydrophobic MD drug-eluting coatings were nearly completely degraded within 90 days in vivo whereas roughly half of hydrophobic MD polymer-only coatings remained after 90 days. Taken together, our in vitro and in vivo results suggest that SynBiosys urethane-linked MBCP and Eureka SOLO hydrophobic MD polymer families possess the physical and chemical properties and vascular biocompatibility necessary for further investigation for use in the next generation of drug-eluting stents.

    Topics: Animals; Caproates; Coronary Vessels; Drug-Eluting Stents; Lactones; Metals; Models, Chemical; Polymers; Sirolimus; Sus scrofa

2010