Page last updated: 2024-08-21

silicon carbide and aluminum oxide

silicon carbide has been researched along with aluminum oxide in 92 studies

Research

Studies (92)

TimeframeStudies, this research(%)All Research%
pre-19905 (5.43)18.7374
1990's16 (17.39)18.2507
2000's21 (22.83)29.6817
2010's48 (52.17)24.3611
2020's2 (2.17)2.80

Authors

AuthorsStudies
Berastegui, E; Brau, E; Canalda, C; Miquel, C1
Leith, D; Maus, R; Plinke, MA1
Dérand, T; Herø, H1
Harmand, MF; Naji, A1
Herö, H; Kvam, K; Oilo, G1
Johnson, GH; Stoddard, JW1
Nordlund, A; Odén, A; Zetterqvist, L1
Maizlish, N; Marmor, M; Mirer, F; Park, R; Silverstein, M1
Andersson, L; Axelson, O; Edling, C; Järvholm, B1
Brody, J; Langer, AM; Miller, A1
Dennison, JB; Fan, PL; Powers, JM1
Powers, JM; Scurria, MS1
Zinner, E1
Rossi, R; Smukler, H1
Atsuta, M; Matsumura, H; Morikawa, T1
Bruch, J; Rehn, B1
Forss, H; Vallittu, PK1
Benkowski, R; Glueck, J; Makinouchi, K; Nosé, Y; Otsuka, G; Takami, Y; Yamane, S1
Makinouchi, K; Niimi, Y; Nosé, Y; Sueoka, A; Takami, Y; Yamane, S1
Jefferies, SR1
Okabe, T; Watanabe, E; Watanabe, I; Yoshida, K1
Anusavice, KJ; Wakabayashi, N1
Kawai, K; Nokubi, T; Taga, Y1
Davis, RD; Overton, JD; Swartz, JM1
Bhamra, G; Fleming, GJ; Palin, WM1
Alegre, B; Anusavice, KJ; Oh, WS; Shen, C1
Amri, A; Saidane, A1
Gokay, O; Mujdeci, A1
Guo, XZ; Yang, H1
Cui, YH; Li, Y; Tao, J1
Forjanic, M; Heintze, SD; Rousson, V1
Chan, DC; de Goes, MF; Henriques, GE; Schneider, R1
de Toledo, BE; Gomes, DA; Leite, FR; Mendes, AJ; Sampaio, JE; Silva, MV1
Chen, ZX; Kawaguchi, T; Shimizu, H; Takahashi, Y; Tsue, F1
Hamano, N; Hojo, S; Ino, S; Katsumata, Y; Okada, S; Teranaka, T; Toyodo, M; Watanabe, T1
Nijhuis, H; Ozcan, M; Valandro, LF1
Ban, S; Nawa, M; Pezzotti, G; Sato, H; Yamada, K1
Attar, N; Karabulut, E; Korkmaz, Y; Ozel, E1
Glazer, HS1
Almilhatti, HJ; Betiol, EA; Giampaolo, ET; Machado, AL; Pavarina, AC; Vergani, CE1
Kawaguchi, T; Shimizu, H; Takahashi, Y; Tsue, F; Yoshida, K1
Celik, C; Ozgünaltay, G1
Azari, A; Dehgan, S; Nikzad, S1
Kazazoglu, E; Ozkurt, Z; Unal, A1
Endo, T; Finger, WJ; Kanehira, M; Komatsu, M; Utterodt, A1
Wang, YG; Zhang, LC1
Ballal, NV; Bhat, KS; Mala, K1
Basak, T; Rao, BS1
Kern, M; Kocjan, A; Kosmac, T; Lehmann, F; Zhang, S1
Frenzel, H; Grundmann, M; Lajn, A; Lorenz, M; Schein, F; von Wenckstern, H; Zhang, Z1
Browne, JE; Cannon, LM; Fagan, AJ1
Karaagaclioglu, L; Yilmaz, B1
Aladağ, A; Artunç, C; Cömlekoğlu, ME; Dündar, M; Güngör, MA1
Burgess, JO; Cakir, D; Ramp, LC; Sadidzadeh, R1
Kawaguchi, T; Lassila, LV; Shimizu, H; Takahashi, Y; Vallittu, PK1
Garcia-Godoy, CE; Piascik, JR; Rothrock, JK; Smith, RL; Stoner, BR; Thompson, JY; Villanueva, C1
Arksornnukit, M; Chaijareenont, P; Koottathape, N; Suwannaroop, P; Takahashi, H1
Elsaka, SE; Swain, MV1
Kelly, JR; Yi, YJ1
Minami, H; Murahara, S; Suzuki, S; Tanaka, T1
Mainjot, AK; Sadoun, MJ; Schajer, GS; Vanheusden, AJ1
Behroozibakhsh, M; Fatemi, M; Hooshmand, T; Keshvad, A; Rostami, G; van Noort, R1
Addison, O; Burke, FJ; Everson, P; Palin, WM1
Adabo, GL; Fais, LM; Fernandes-Filho, RB; Pereira-da-Silva, MA; Vaz, LG1
Liang, X; Liao, Y; Teng, J; Wang, H1
Askari, E; Kadri, NA; Mehrali, M; Metselaar, IH; Rahman, MM1
Esposito, L; Monaco, C; Scotti, R; Tucci, A1
Lin, YH; Ou, KL; Peng, PW1
Gönülol, N; Yilmaz, F1
Kern, M; Lehmann, F1
Kusano, K; Okazaki, M; Satoda, T; Shimoe, S; Tanoue, N1
Hotta, Y; Miyazaki, T; Oguri, T; Tamaki, Y1
Carvalho, RM; Coelho, PG; Janal, MN; Lorenzoni, FC; Silva, NR; Thompson, VP; Valverde, GB; Weltemann, KD1
Alawjali, SS; Lui, JL1
Abi-Rached, Fde O; Adabo, GL; de Almeida-Júnior, AA; Fonseca, RG; Haneda, IG1
Kim, OS; Lee, BA; Park, YJ; Vang, MS1
Elsaka, SE1
Egoshi, T; Sawase, T; Soeno, K; Taira, Y1
Lassilla, L; Ozcan, M; Raadschelders, J; Vallittu, P1
Chai, ZG; Chen, JH; Wang, H; Wang, YJ; Zhang, X1
Baseren, M; Berber, A; Cakir, FY; Gurgan, S1
Al Jabbari, YS; Al Rifaiy, M; Al Taweel, SM; Alqahtani, MQ; Koutsoukis, T; Zinelis, S1
Barakah, HM; Taher, NM1
Bhargava, P; Jambhekar, SS; Kheur, M; Londhe, A; Matani, JD1
Ahmadi, H; Ghasemi, A; Ghavam, M; Kermanshah, H; Nateghifard, A; Torabzadeh, H; Zolfagharnasab, K1
Addison, O; Borges, AL; Costa, AK; Fleming, GJ1
Ding, N; Zhang, M; Zhang, Z; Zheng, D1
Hirata JUNIOR, R; Lacerda, VA; Pereira, LO; Perez, CR1
Flury, S; Lussi, A; Peutzfeldt, A1
Ferrari, M; Habchi, R; Ounsi, HF; Salameh, Z; Skienhe, H1
de Assis, MKM; Monteiro Souza, R; Pereira Barretto da Costa-Félix, R; Victor Alvarenga, A1
Chen, M; Heijman, SGJ; Luiten-Olieman, MWJ; Rietveld, LC1

Reviews

2 review(s) available for silicon carbide and aluminum oxide

ArticleYear
On the chemo-mechanical polishing for nano-scale surface finish of brittle wafers.
    Recent patents on nanotechnology, 2010, Volume: 4, Issue:2

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Chemistry, Physical; Nanotechnology; Patents as Topic; Semiconductors; Silicon; Silicon Compounds; Surface Properties

2010
Recent progress on ZnO-based metal-semiconductor field-effect transistors and their application in transparent integrated circuits.
    Advanced materials (Deerfield Beach, Fla.), 2010, Dec-14, Volume: 22, Issue:47

    Topics: Aluminum Oxide; Arsenicals; Carbon Compounds, Inorganic; Gallium; Glass; Silicon Compounds; Transistors, Electronic; Zinc Oxide

2010

Trials

12 trial(s) available for silicon carbide and aluminum oxide

ArticleYear
Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging.
    Dental materials journal, 2008, Volume: 27, Issue:1

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Dental Bonding; Dental Cements; Dental Porcelain; Humans; Materials Testing; Methacrylates; Organophosphorus Compounds; Resin Cements; Shear Strength; Silanes; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Yttrium; Zirconium

2008
Effect of finishing and polishing procedures on surface roughness of tooth-colored materials.
    Quintessence international (Berlin, Germany : 1985), 2009, Volume: 40, Issue:9

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Compomers; Composite Resins; Curing Lights, Dental; Dental Cements; Dental Materials; Dental Polishing; Diamond; Humans; Materials Testing; Particle Size; Polyethylene Terephthalates; Silicon Compounds; Silicones; Surface Properties; Temperature; Time Factors; Water

2009
Ceramic (Feldspathic & IPS Empress II) vs. laboratory composite (Gradia) veneers; a comparison between their shear bond strength to enamel; an in vitro study.
    Journal of oral rehabilitation, 2010, Volume: 37, Issue:7

    Topics: Acid Etching, Dental; Adhesiveness; Aluminum Oxide; Aluminum Silicates; Bicuspid; Carbon Compounds, Inorganic; Cementation; Composite Resins; Dental Bonding; Dental Cements; Dental Enamel; Dental Porcelain; Dental Veneers; Humans; Lithium Compounds; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Molar; Potassium Compounds; Resin Cements; Shear Strength; Silanes; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Time Factors

2010
Evaluation of the effect of maleic acid and ethylenediaminetetraacetic acid on the microhardness and surface roughness of human root canal dentin.
    Journal of endodontics, 2010, Volume: 36, Issue:8

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Chelating Agents; Dental Pulp Cavity; Dentin; Edetic Acid; Hardness; Humans; Maleates; Materials Testing; Root Canal Irrigants; Silicon Compounds; Surface Properties; Time Factors; Tooth Apex

2010
Gloss and surface roughness produced by polishing kits on resin composites.
    American journal of dentistry, 2010, Volume: 23, Issue:4

    Topics: Acrylic Resins; Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Dental Materials; Dental Polishing; Diamond; Ferric Compounds; Humans; Light; Materials Testing; Polyurethanes; Silicon Compounds; Surface Properties; Time Factors; Titanium; Ultrasonics; Water

2010
Effect of surface preparation on the bond strength of heat-polymerized denture base resin to commercially pure titanium and cobalt-chromium alloy.
    Dental materials journal, 2011, Volume: 30, Issue:2

    Topics: Acrylic Resins; Aluminum Oxide; Boron Compounds; Carbon Compounds, Inorganic; Chromium Alloys; Composite Resins; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Dental Polishing; Dental Stress Analysis; Denture Bases; Hot Temperature; Humans; Materials Testing; Methacrylates; Methylmethacrylates; Microscopy, Electron, Scanning; Polymerization; Resin Cements; Shear Strength; Silicon Compounds; Silicon Dioxide; Stress, Mechanical; Surface Properties; Thiones; Titanium

2011
Long-term microtensile bond strength of surface modified zirconia.
    Dental materials : official publication of the Academy of Dental Materials, 2011, Volume: 27, Issue:8

    Topics: Acid Etching, Dental; Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Humans; Materials Testing; Phosphoric Acids; Resin Cements; Salicylic Acid; Silanes; Silicon Compounds; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Water; Zirconium

2011
Failure responses of a dental porcelain having three surface treatments under three stressing conditions.
    Dental materials : official publication of the Academy of Dental Materials, 2011, Volume: 27, Issue:12

    Topics: Acid Etching, Dental; Algorithms; Aluminum Oxide; Aluminum Silicates; Bite Force; Carbon Compounds, Inorganic; Dental Bonding; Dental Etching; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Elastic Modulus; Epoxy Resins; Glass; Humans; Hydrofluoric Acid; Materials Testing; Phosphates; Pliability; Potassium Compounds; Resin Cements; Silicon Compounds; Sound; Stress, Mechanical; Surface Properties; Water

2011
Improved bonding of zirconia substructures to resin using a "glaze-on" technique.
    Journal of dentistry, 2012, Volume: 40, Issue:4

    Topics: Acid Etching, Dental; Aluminum Oxide; Carbon Compounds, Inorganic; Coated Materials, Biocompatible; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Porcelain; Dental Stress Analysis; Glass; Hot Temperature; Humans; Hydrofluoric Acid; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Water; Yttrium; Zirconium

2012
Titanium surface topography after brushing with fluoride and fluoride-free toothpaste simulating 10 years of use.
    Journal of dentistry, 2012, Volume: 40, Issue:4

    Topics: Alloys; Aluminum Oxide; Carbon Compounds, Inorganic; Cariostatic Agents; Dental Alloys; Dental Materials; Dental Polishing; Diamond; Fluorides; Humans; Imaging, Three-Dimensional; Materials Testing; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Silicon Compounds; Silicon Dioxide; Spectrometry, X-Ray Emission; Surface Properties; Time Factors; Titanium; Toothbrushing; Toothpastes; Water

2012
Microstructural changes produced by abrading Y-TZP in presintered and sintered conditions.
    Journal of dentistry, 2013, Volume: 41, Issue:2

    Topics: Algorithms; Aluminum Oxide; Carbon Compounds, Inorganic; Ceramics; Chemical Phenomena; Crystallography; Dental Etching; Dental Materials; Hardness; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Porosity; Silicon Compounds; Silicon Dioxide; Stress, Mechanical; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium

2013
Surface characterisation and bonding of Y-TZP following non-thermal plasma treatment.
    Journal of dentistry, 2013, Volume: 41, Issue:1

    Topics: Adhesiveness; Aluminum Oxide; Argon; Carbon; Carbon Compounds, Inorganic; Cementation; Ceramics; Coated Materials, Biocompatible; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Humans; Interferometry; Materials Testing; Methacrylates; Oxygen; Photoelectron Spectroscopy; Plasma Gases; Resin Cements; Silicon Compounds; Silicon Dioxide; Stress, Mechanical; Surface Properties; Surface Tension; Tensile Strength; Wettability; Yttrium; Zirconium

2013

Other Studies

78 other study(ies) available for silicon carbide and aluminum oxide

ArticleYear
Surface roughness of finished composite resins.
    The Journal of prosthetic dentistry, 1992, Volume: 68, Issue:5

    Topics: Aluminum Oxide; Analysis of Variance; Bisphenol A-Glycidyl Methacrylate; Carbon; Carbon Compounds, Inorganic; Composite Resins; Dental Polishing; Diamond; Humans; Resin Cements; Silicon; Silicon Compounds; Surface Properties; Tungsten; Tungsten Compounds

1992
Experimental examination of factors that affect dust generation by using Heubach and MRI testers.
    American Industrial Hygiene Association journal, 1992, Volume: 53, Issue:5

    Topics: Aluminum Oxide; Carbon; Carbon Compounds, Inorganic; Dust; Humans; Models, Statistical; Occupational Exposure; Particle Size; Research Design; Silicon; Silicon Compounds

1992
Bond strength of porcelain on cast vs. wrought titanium.
    Scandinavian journal of dental research, 1992, Volume: 100, Issue:3

    Topics: Aluminum Oxide; Carbon; Carbon Compounds, Inorganic; Dental Bonding; Dental Casting Investment; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Electron Probe Microanalysis; Materials Testing; Oxides; Silicon; Silicon Compounds; Stress, Mechanical; Surface Properties; Tensile Strength; Titanium

1992
Cytocompatibility of two coating materials, amorphous alumina and silicon carbide, using human differentiated cell cultures.
    Biomaterials, 1991, Volume: 12, Issue:7

    Topics: Aluminum Oxide; Biocompatible Materials; Carbon; Carbon Compounds, Inorganic; Cell Adhesion; Cell Differentiation; Cell Division; Cells, Cultured; Fibroblasts; Humans; Kinetics; Materials Testing; Osteoblasts; Prostheses and Implants; Proteins; Silicon; Silicon Compounds

1991
Fracture toughness measurements of some dental core ceramics: a methodologic study.
    Scandinavian journal of dental research, 1991, Volume: 99, Issue:6

    Topics: Aluminum Oxide; Carbon; Carbon Compounds, Inorganic; Ceramics; Crowns; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Hardness; Materials Testing; Microscopy, Electron, Scanning; Silicon; Silicon Compounds; Stress, Mechanical; Surface Properties

1991
An evaluation of polishing agents for composite resins.
    The Journal of prosthetic dentistry, 1991, Volume: 65, Issue:4

    Topics: Acrylic Resins; Aluminum Oxide; Analysis of Variance; Bisphenol A-Glycidyl Methacrylate; Carbon; Carbon Compounds, Inorganic; Composite Resins; Dental Materials; Dental Polishing; Equipment Design; Evaluation Studies as Topic; Methacrylates; Polymethacrylic Acids; Polyurethanes; Resin Cements; Rubber; Silicon; Silicon Compounds; Surface Properties

1991
A comparative experimental investigation in monkeys between three different implant materials.
    International journal of oral and maxillofacial surgery, 1989, Volume: 18, Issue:6

    Topics: Aluminum; Aluminum Oxide; Animals; Biocompatible Materials; Bone and Bones; Carbon; Carbon Compounds, Inorganic; Dental Implants; Macaca fascicularis; Materials Testing; Microscopy, Electron, Scanning; Silicon; Silicon Compounds; Surface Properties; Titanium; Wound Healing; Zirconium

1989
Mortality among bearing plant workers exposed to metalworking fluids and abrasives.
    Journal of occupational medicine. : official publication of the Industrial Medical Association, 1988, Volume: 30, Issue:9

    Topics: Aluminum; Aluminum Oxide; Carbon; Carbon Compounds, Inorganic; Chemical and Drug Induced Liver Injury; Connecticut; Female; Humans; Industrial Oils; Liver Diseases; Lung Neoplasms; Male; Metallurgy; Occupational Diseases; Pancreatic Neoplasms; Silicon; Silicon Compounds; Smoke; Stomach Neoplasms

1988
Mortality and cancer incidence among workers in an abrasive manufacturing industry.
    British journal of industrial medicine, 1987, Volume: 44, Issue:1

    Topics: Aluminum Oxide; Carbon; Carbon Compounds, Inorganic; Formaldehyde; Humans; Male; Neoplasms; Occupational Diseases; Silicon; Silicon Compounds; Sweden

1987
Pneumoconiosis associated with exposure to glass and abrasive particles.
    American journal of industrial medicine, 1984, Volume: 6, Issue:5

    Topics: Aluminum; Aluminum Oxide; Biopsy; Carbon; Carbon Compounds, Inorganic; Dust; Glass; Humans; Lung; Lung Volume Measurements; Male; Middle Aged; Pneumoconiosis; Silicon; Silicon Compounds

1984
Surface roughness of microfilled composites.
    Journal of the American Dental Association (1939), 1981, Volume: 102, Issue:6

    Topics: Acrylic Resins; Aluminum Oxide; Carbon; Carbon Compounds, Inorganic; Composite Resins; Dental Instruments; Phthalic Acids; Polyethylene Glycols; Polyethylene Terephthalates; Polyurethanes; Rubber; Silicon; Silicon Compounds; Surface Properties

1981
Surface roughness of two polished ceramic materials.
    The Journal of prosthetic dentistry, 1994, Volume: 71, Issue:2

    Topics: Aluminum Oxide; Analysis of Variance; Carbon; Carbon Compounds, Inorganic; Ceramics; Dental Polishing; Dental Porcelain; Diamond; Microscopy, Electron, Scanning; Silicon Compounds; Surface Properties

1994
Stardust in the laboratory.
    Science (New York, N.Y.), 1996, Jan-05, Volume: 271, Issue:5245

    Topics: Aluminum Oxide; Astronomical Phenomena; Astronomy; Carbon; Carbon Compounds, Inorganic; Hydrogen; Meteoroids; Oxygen; Oxygen Isotopes; Silicon Compounds

1996
A scanning electron microscope study comparing the effectiveness of different types of sharpening stones and curets.
    Journal of periodontology, 1995, Volume: 66, Issue:11

    Topics: Aluminum Oxide; Carbon; Carbon Compounds, Inorganic; Dental Polishing; Humans; Microscopy, Electron, Scanning; Particle Size; Root Planing; Silicates; Silicon Compounds; Smear Layer; Steel; Surface Properties; Tooth Root

1995
Bonding of a mica-based castable ceramic material with a tri-n-butylborane-initiated adhesive resin.
    Journal of oral rehabilitation, 1996, Volume: 23, Issue:7

    Topics: Acid Etching, Dental; Acrylic Resins; Adhesives; Aluminum Oxide; Aluminum Silicates; Ammonium Compounds; Boron Compounds; Carbon; Carbon Compounds, Inorganic; Ceramics; Dental Bonding; Dental Casting Investment; Electron Probe Microanalysis; Fluorides; Materials Testing; Methylmethacrylate; Methylmethacrylates; Quaternary Ammonium Compounds; Silanes; Silicon Compounds; Stress, Mechanical; Surface Properties

1996
Relevant differences in pathogenicity of nuisance dusts; model investigations on samples of silicon carbide dusts.
    Experimental and toxicologic pathology : official journal of the Gesellschaft fur Toxikologische Pathologie, 1996, Volume: 48, Issue:6

    Topics: Aluminum Oxide; Animals; Bronchoalveolar Lavage Fluid; Carbon; Carbon Compounds, Inorganic; Dust; Granulocytes; Guinea Pigs; Hydrogen Peroxide; In Vitro Techniques; Inflammation; Lung Diseases; Macrophages; Male; Pulmonary Surfactants; Quartz; Rats; Silicon Compounds; Time Factors

1996
Adhesion of glass ionomer cement to a ceramometal alloy.
    The Journal of prosthetic dentistry, 1997, Volume: 77, Issue:1

    Topics: Adhesiveness; Aluminum Oxide; Analysis of Variance; Carbon; Carbon Compounds, Inorganic; Composite Resins; Dental Bonding; Dental Polishing; Dental Prosthesis Repair; Diamond; Glass Ionomer Cements; Gold Alloys; Materials Testing; Metal Ceramic Alloys; Silicon Compounds; Surface Properties

1997
Protein adsorption onto ceramic surfaces.
    Journal of biomedical materials research, 1998, Volume: 40, Issue:1

    Topics: Adsorption; Aluminum Oxide; Blood Proteins; Blotting, Western; Carbon Compounds, Inorganic; Ceramics; Electrophoresis, Polyacrylamide Gel; Materials Testing; Polyvinyl Chloride; Silicon Compounds

1998
Evaluation of platelet adhesion and activation on materials for an implantable centrifugal blood pump.
    Artificial organs, 1998, Volume: 22, Issue:9

    Topics: Alloys; Aluminum Oxide; Biocompatible Materials; Blood; Carbon Compounds, Inorganic; Centrifugation; Female; Heart-Assist Devices; Humans; Immunoenzyme Techniques; In Vitro Techniques; Male; P-Selectin; Platelet Activation; Platelet Adhesiveness; Polycarboxylate Cement; Polyethylenes; Silicon Compounds; Titanium

1998
The art and science of abrasive finishing and polishing in restorative dentistry.
    Dental clinics of North America, 1998, Volume: 42, Issue:4

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Contraindications; Dental Polishing; Dental Porcelain; Dental Restoration, Permanent; Diamond; Esthetics, Dental; Humans; Ointments; Resins, Synthetic; Rubber; Silicon Compounds; Surface Properties

1998
Effect of surface contamination on adhesive bonding of cast pure titanium and Ti-6Al-4V alloy.
    The Journal of prosthetic dentistry, 1999, Volume: 81, Issue:3

    Topics: Alloys; Aluminum Oxide; Aluminum Silicates; Analysis of Variance; Boron Compounds; Carbon Compounds, Inorganic; Dental Alloys; Dental Bonding; Dental Casting Investment; Humans; Lithium Compounds; Materials Testing; Methacrylates; Methylmethacrylates; Microscopy, Electron, Scanning; Phosphates; Resin Cements; Silicon Compounds; Stress, Mechanical; Surface Properties; Thermodynamics; Titanium

1999
Crack initiation modes in bilayered alumina/porcelain disks as a function of core/veneer thickness ratio and supporting substrate stiffness.
    Journal of dental research, 2000, Volume: 79, Issue:6

    Topics: Aluminum Oxide; Analysis of Variance; Carbon Compounds, Inorganic; Ceramics; Chromium Alloys; Dental Alloys; Dental Bonding; Dental Porcelain; Dental Veneers; Elasticity; Epoxy Resins; Finite Element Analysis; Humans; Materials Testing; Post and Core Technique; Silicon Compounds; Stress, Mechanical; Surface Properties; Tensile Strength

2000
New method for divesting cobalt-chromium alloy castings: sandblasting with a mixed abrasive powder.
    The Journal of prosthetic dentistry, 2001, Volume: 85, Issue:4

    Topics: Aluminum Oxide; Analysis of Variance; Carbon Compounds, Inorganic; Chromium Alloys; Dental Alloys; Dental Casting Investment; Dental Casting Technique; Denture, Partial, Removable; Glass; Hardness; Humans; Materials Testing; Microscopy, Electron, Scanning; Particle Size; Silicon Compounds; Statistics as Topic; Surface Properties; Time Factors

2001
Tensile bond strength of resin-modified glass-ionomer cement to microabraded and silica-coated or tin-plated high noble ceramic alloy.
    Journal of prosthodontics : official journal of the American College of Prosthodontists, 2000, Volume: 9, Issue:4

    Topics: Aluminum Oxide; Analysis of Variance; Carbon Compounds, Inorganic; Cementation; Dental Alloys; Dental Bonding; Dental Stress Analysis; Electroplating; Glass Ionomer Cements; Gold Alloys; Humans; Materials Testing; Metal Ceramic Alloys; Microscopy, Electron, Scanning; Resin Cements; Silicon Compounds; Silicon Dioxide; Statistics as Topic; Surface Properties; Tensile Strength; Tin

2000
The effect of surface roughness on the flexure strength of an alumina reinforced all-ceramic crown material.
    Journal of dentistry, 2002, Volume: 30, Issue:4

    Topics: Algorithms; Aluminum Oxide; Analysis of Variance; Carbon Compounds, Inorganic; Ceramics; Crowns; Dental Materials; Dental Porcelain; Dental Restoration Failure; Elasticity; Forecasting; Hardness; Humans; Materials Testing; Pliability; Reproducibility of Results; Silicon Compounds; Statistics as Topic; Stress, Mechanical; Surface Properties

2002
Wetting characteristic of ceramic to water and adhesive resin.
    The Journal of prosthetic dentistry, 2002, Volume: 88, Issue:6

    Topics: Acid Etching, Dental; Adhesiveness; Adhesives; Aluminum Oxide; Aluminum Silicates; Analysis of Variance; Apatites; Bisphenol A-Glycidyl Methacrylate; Carbon Compounds, Inorganic; Ceramics; Composite Resins; Dental Bonding; Dental Polishing; Dental Porcelain; Humans; Hydrofluoric Acid; Lithium Compounds; Materials Testing; Polyethylene Glycols; Polymethacrylic Acids; Silicates; Silicon Compounds; Statistics as Topic; Surface Properties; Water; Wettability

2002
TLM simulation of microwave sintering of ceramics using SiC stimulus.
    The Journal of microwave power and electromagnetic energy : a publication of the International Microwave Power Institute, 2001, Volume: 36, Issue:2

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Ceramics; Computer Simulation; Heating; Hot Temperature; Microwaves; Models, Theoretical; Radiation Dosage; Radiometry; Scattering, Radiation; Silicon Compounds; Thermography

2001
The effect of airborne-particle abrasion on the shear bond strength of four restorative materials to enamel and dentin.
    The Journal of prosthetic dentistry, 2004, Volume: 92, Issue:3

    Topics: Air Abrasion, Dental; Aluminum Oxide; Analysis of Variance; Carbon Compounds, Inorganic; Compomers; Composite Resins; Dental Bonding; Dental Enamel; Dental Materials; Dental Restoration, Permanent; Dentin; Glass Ionomer Cements; Humans; Materials Testing; Resin Cements; Shear Strength; Silicon Compounds; Stress, Mechanical; Surface Properties; Water

2004
Sintering and microstructure of silicon carbide ceramic with Y3Al5O12 added by sol-gel method.
    Journal of Zhejiang University. Science. B, 2005, Volume: 6, Issue:3

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Ceramics; Crystallization; Gels; Hot Temperature; Molecular Conformation; Phase Transition; Silicon Compounds; Surface Properties; Yttrium

2005
[Study on the measurement of residual stresses around indentations in SiC/Al2O3 nanocomposite using fluorescence].
    Guang pu xue yu guang pu fen xi = Guang pu, 2005, Volume: 25, Issue:2

    Topics: Algorithms; Aluminum Oxide; Carbon Compounds, Inorganic; Compressive Strength; Materials Testing; Nanocomposites; Silicon Compounds; Spectrometry, Fluorescence

2005
Surface roughness and gloss of dental materials as a function of force and polishing time in vitro.
    Dental materials : official publication of the Academy of Dental Materials, 2006, Volume: 22, Issue:2

    Topics: Acrylic Resins; Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Dental Alloys; Dental Amalgam; Dental Materials; Dental Polishing; Diamond; Ferrous Compounds; Glass Ionomer Cements; Humans; Materials Testing; Optics and Photonics; Polyurethanes; Rubber; Silicon Compounds; Solutions; Stress, Mechanical; Surface Properties; Time Factors; Titanium; Water

2006
Tensile bond strength of dual curing resin-based cements to commercially pure titanium.
    Dental materials : official publication of the Academy of Dental Materials, 2007, Volume: 23, Issue:1

    Topics: Adhesiveness; Air Abrasion, Dental; Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Carbon Compounds, Inorganic; Dental Bonding; Dental Materials; Dental Polishing; Dental Stress Analysis; Humans; Materials Testing; Microscopy, Electron, Scanning; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Silicon Compounds; Stress, Mechanical; Surface Properties; Tensile Strength; Time Factors; Titanium; Ultrasonics

2007
Sharpening of periodontal instruments with different sharpening stones and its influence upon root debridement--scanning electronic microscopy assessment.
    Journal of the International Academy of Periodontology, 2006, Volume: 8, Issue:1

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Dental Alloys; Humans; Microscopy, Electron, Scanning; Root Planing; Silicon Compounds; Single-Blind Method; Stainless Steel; Subgingival Curettage; Surface Properties; Tooth Root

2006
Bonding of autopolymerizing acrylic resins to magnetic stainless steel alloys using metal conditioner.
    Journal of dentistry, 2008, Volume: 36, Issue:2

    Topics: Acrylic Resins; Aluminum Oxide; Barbiturates; Boron Compounds; Carbon Compounds, Inorganic; Dental Alloys; Dental Bonding; Dental Etching; Dental Materials; Humans; Magnetics; Materials Testing; Methacrylates; Methylmethacrylates; Resin Cements; Shear Strength; Silicon Compounds; Stainless Steel; Stress, Mechanical; Surface Properties; Temperature; Thiones

2008
Influence of simplified silica coating method on the bonding strength of resin cement to dental alloy.
    Dental materials journal, 2008, Volume: 27, Issue:1

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Coated Materials, Biocompatible; Dental Alloys; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Electron Probe Microanalysis; Humans; Materials Testing; Resin Cements; Shear Strength; Silanes; Silicon Compounds; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors

2008
Mechanical properties of dental zirconia ceramics changed with sandblasting and heat treatment.
    Dental materials journal, 2008, Volume: 27, Issue:3

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Ceramics; Cerium; Dental Etching; Dental Materials; Hot Temperature; Humans; Materials Testing; Mechanics; Microscopy, Electron, Scanning; Nanocomposites; Phase Transition; Pliability; Silicon Compounds; Spectrum Analysis, Raman; Surface Properties; X-Ray Diffraction; Yttrium; Zirconium

2008
Effect of one-step polishing systems on surface roughness of different flowable restorative materials.
    Dental materials journal, 2008, Volume: 27, Issue:6

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Dental Cements; Dental Materials; Dental Polishing; Dental Restoration, Permanent; Diamond; Ferric Compounds; Hemiterpenes; Humans; Latex; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Polyethylene Terephthalates; Polyurethanes; Silicon Compounds; Silicon Dioxide; Surface Properties; Titanium; Viscosity

2008
Simplifying finishing and polishing techniques for direct composite restorations.
    Dentistry today, 2009, Volume: 28, Issue:1

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Dental Materials; Dental Occlusion; Dental Plaque; Dental Polishing; Dental Restoration, Permanent; Diamond; Equipment Design; Esthetics, Dental; Humans; Rubber; Silicon Compounds; Stress, Mechanical; Surface Properties

2009
Adhesive bonding of resin composite to various Ni-Cr alloy surfaces using different metal conditioners and a surface modification system.
    Journal of prosthodontics : official journal of the American College of Prosthodontists, 2009, Volume: 18, Issue:8

    Topics: Acrylates; Aluminum Oxide; Carbon Compounds, Inorganic; Chromium Alloys; Composite Resins; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Dental Polishing; Dental Veneers; Glass Ionomer Cements; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Nickel; Resin Cements; Shear Strength; Silanes; Silicate Cement; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Tricarboxylic Acids; Water

2009
Effect of surface preparation on the failure load of a highly filled composite resin bonded to a denture base resin.
    Journal of prosthodontics : official journal of the American College of Prosthodontists, 2009, Volume: 18, Issue:8

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Dental Stress Analysis; Denture Bases; Humans; Materials Testing; Methylene Chloride; Polymethyl Methacrylate; Shear Strength; Silanes; Silicon Compounds; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water

2009
In vitro evaluation of shear bond strength of veneering ceramics to zirconia.
    Dental materials journal, 2010, Volume: 29, Issue:2

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Dental Bonding; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Hot Temperature; Humans; Materials Testing; Pressure; Shear Strength; Silicon Compounds; Stress, Mechanical; Surface Properties; Zirconium

2010
Surface texture and roughness of polished nanofill and nanohybrid resin composites.
    Dental materials journal, 2010, Volume: 29, Issue:2

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Dental Materials; Dental Polishing; Diamond; Glass; Humans; Materials Testing; Microscopy, Electron, Scanning; Nanocomposites; Nanoparticles; Polyethylene Terephthalates; Silicon Compounds; Surface Properties; Urethane

2010
Theoretical analysis on pulsed microwave heating of pork meat supported on ceramic plate.
    Meat science, 2010, Volume: 86, Issue:3

    Topics: Aluminum Oxide; Animals; Carbon Compounds, Inorganic; Ceramics; Cooking; Heating; Hot Temperature; Meat Products; Microwaves; Models, Theoretical; Silicon Compounds; Swine

2010
Influence of contamination on resin bond strength to nano-structured alumina-coated zirconia ceramic.
    European journal of oral sciences, 2010, Volume: 118, Issue:4

    Topics: Acid Etching, Dental; Aluminum Oxide; Carbon Compounds, Inorganic; Coated Materials, Biocompatible; Coloring Agents; Composite Resins; Dental Bonding; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Nanostructures; Phosphates; Phosphoric Acids; Resin Cements; Saliva; Silicon Compounds; Silicones; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Water; Yttrium; Zirconium

2010
Novel tissue mimicking materials for high frequency breast ultrasound phantoms.
    Ultrasound in medicine & biology, 2011, Volume: 37, Issue:1

    Topics: Acoustics; Agar; Aluminum Oxide; Benzalkonium Compounds; Carbon Compounds, Inorganic; Glycerol; Humans; Phantoms, Imaging; Silicon Compounds; Ultrasonography, Mammary

2011
In vitro evaluation of color replication of metal ceramic specimens using visual and instrumental color determinations.
    The Journal of prosthetic dentistry, 2011, Volume: 105, Issue:1

    Topics: Adult; Aluminum Oxide; Carbon Compounds, Inorganic; Color; Color Perception; Colorimetry; Dental Etching; Dental Polishing; Dental Porcelain; Female; Humans; Male; Metal Ceramic Alloys; Middle Aged; Prosthesis Coloring; Reproducibility of Results; Silicon Compounds; Spectrophotometry

2011
Effects of soldering and laser welding on bond strength of ceramic to metal.
    The Journal of prosthetic dentistry, 2011, Volume: 105, Issue:1

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Chromium Alloys; Dental Alloys; Dental Bonding; Dental Casting Investment; Dental Etching; Dental Polishing; Dental Porcelain; Dental Soldering; Dental Stress Analysis; Dental Veneers; Elastic Modulus; Elasticity; Hardness; Humans; Lasers, Solid-State; Materials Testing; Metal Ceramic Alloys; Microscopy, Electron, Scanning; Nickel; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength

2011
In vitro wear resistance, hardness and elastic modulus of artificial denture teeth.
    Dental materials journal, 2011, Volume: 30, Issue:4

    Topics: Acrylic Resins; Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Dental Materials; Dental Polishing; Dental Porcelain; Dental Restoration Wear; Elastic Modulus; Hardness; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Polymethyl Methacrylate; Polyurethanes; Silicon Compounds; Surface Properties; Tooth, Artificial

2011
Effect of surface treatments on adhesion of low-fusing porcelain to titanium as determined by strain energy release rate.
    Dental materials : official publication of the Academy of Dental Materials, 2011, Volume: 27, Issue:12

    Topics: Acid Etching, Dental; Adhesiveness; Algorithms; Aluminum Oxide; Carbon Compounds, Inorganic; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Diamond; Elastic Modulus; Humans; Hydrofluoric Acid; Hydrogen Peroxide; Materials Testing; Methylene Chloride; Microscopy, Electron, Scanning; Oxidants; Pliability; Silicon Compounds; Stress, Mechanical; Surface Properties; Time Factors; Titanium

2011
Effects of metal primers on the bonding of an adhesive resin cement to noble metal ceramic alloys after thermal cycling.
    The Journal of prosthetic dentistry, 2011, Volume: 106, Issue:6

    Topics: Aluminum Oxide; Boron Compounds; Carbon Compounds, Inorganic; Copper; Dental Bonding; Dental Cements; Dental Etching; Gold Alloys; Humans; Materials Testing; Metal Ceramic Alloys; Methacrylates; Methylmethacrylates; Palladium; Resin Cements; Shear Strength; Silicon Compounds; Silver; Stress, Mechanical; Surface Properties; Temperature; Thiouracil; Triazines

2011
Influence of veneer thickness on residual stress profile in veneering ceramic: measurement by hole-drilling.
    Dental materials : official publication of the Academy of Dental Materials, 2012, Volume: 28, Issue:2

    Topics: Acid Etching, Dental; Aluminum Oxide; Aluminum Silicates; Carbon Compounds, Inorganic; Ceramics; Chromium Alloys; Computer-Aided Design; Dental Etching; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Hot Temperature; Humans; Hydrofluoric Acid; Materials Testing; Mechanical Phenomena; Metal Ceramic Alloys; Potassium Compounds; Silicon Compounds; Stress, Mechanical; Surface Properties; Thermodynamics; Yttrium; Zirconium

2012
Interfacial fracture toughness of different resin cements bonded to a lithium disilicate glass ceramic.
    Journal of dentistry, 2012, Volume: 40, Issue:2

    Topics: Acid Etching, Dental; Aluminum Oxide; Carbon Compounds, Inorganic; Ceramics; Dental Bonding; Dental Etching; Dental Porcelain; Dental Stress Analysis; Humans; Hydrofluoric Acid; Lithium Compounds; Materials Testing; Microscopy, Electron, Scanning; Resin Cements; Self-Curing of Dental Resins; Silanes; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water

2012
Evaluation of a conditioning method to improve core-veneer bond strength of zirconia restorations.
    The Journal of prosthetic dentistry, 2012, Volume: 107, Issue:6

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Ceramics; Coated Materials, Biocompatible; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Hot Temperature; Humans; Materials Testing; Microscopy, Electron, Scanning; Shear Strength; Silicon Compounds; Stress, Mechanical; Surface Properties; Water; Yttrium; Zirconium

2012
Fabrication and mechanical properties of Al2O3/SiC/ZrO2 functionally graded material by electrophoretic deposition.
    Journal of the mechanical behavior of biomedical materials, 2012, Volume: 12

    Topics: Aluminum Oxide; Biocompatible Materials; Butanones; Carbon Compounds, Inorganic; Compressive Strength; Electrophoresis; Hardness; Hot Temperature; Joint Prosthesis; Materials Testing; Powders; Prosthesis Design; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; X-Ray Diffraction; Zirconium

2012
The effect of titanium with electrochemical anodization on the response of the adherent osteoblast-like cell.
    Implant dentistry, 2012, Volume: 21, Issue:4

    Topics: Acid Etching, Dental; Alkaline Phosphatase; Aluminum Oxide; Carbon Compounds, Inorganic; Cell Adhesion; Cell Culture Techniques; Cell Line; Cell Proliferation; Cell Survival; Coloring Agents; Dental Etching; Dental Materials; Electrochemical Techniques; Humans; Hydrochloric Acid; Materials Testing; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Nanostructures; Osteoblasts; Photoelectron Spectroscopy; Silicon Compounds; Sulfuric Acids; Surface Properties; Tetrazolium Salts; Thiazoles; Titanium; Wettability

2012
The effects of finishing and polishing techniques on surface roughness and color stability of nanocomposites.
    Journal of dentistry, 2012, Volume: 40 Suppl 2

    Topics: Algorithms; Aluminum Oxide; Carbon Compounds, Inorganic; Coffee; Color; Colorimetry; Composite Resins; Dental Materials; Dental Polishing; Diamond; Glass; Humans; Materials Testing; Nanocomposites; Silicon Compounds; Silicon Dioxide; Surface Properties; Time Factors; Tungsten Compounds; Zirconium

2012
Influence of surface conditioning on bonding to polyetheretherketon (PEEK).
    Dental materials : official publication of the Academy of Dental Materials, 2012, Volume: 28, Issue:12

    Topics: Adhesiveness; Aluminum Oxide; Benzophenones; Biocompatible Materials; Bisphenol A-Glycidyl Methacrylate; Carbon Compounds, Inorganic; Coated Materials, Biocompatible; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Stress Analysis; Humans; Ketones; Materials Testing; Methacrylates; Methylmethacrylate; Microscopy, Electron, Scanning; Polyethylene Glycols; Polymers; Polyurethanes; Silanes; Silicon Compounds; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Water

2012
Influence of air-abrasion and subsequent heat treatment on bonding between zirconia framework material and indirect composites.
    Dental materials journal, 2012, Volume: 31, Issue:5

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Computer-Aided Design; Crystallography; Dental Bonding; Dental Etching; Dental Materials; Dental Stress Analysis; Hot Temperature; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Polyurethanes; Shear Strength; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Water; X-Ray Diffraction; Yttrium; Zirconium

2012
Effects of a convenient silica-coating treatment on shear bond strengths of porcelain veneers on zirconia-based ceramics.
    Dental materials journal, 2012, Volume: 31, Issue:5

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Cerium; Coated Materials, Biocompatible; Dental Bonding; Dental Materials; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Electron Probe Microanalysis; Hot Temperature; Humans; Materials Testing; Nanocomposites; Nanoparticles; Shear Strength; Silanes; Silicon; Silicon Dioxide; Stress, Mechanical; Surface Properties; Wettability; Zirconium

2012
Effect of one-step polishing system on the color stability of nanocomposites.
    Journal of dentistry, 2013, Volume: 41 Suppl 3

    Topics: Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Carbon Compounds, Inorganic; Coffee; Color; Composite Resins; Dental Materials; Dental Polishing; Hemiterpenes; Humans; Immersion; Latex; Materials Testing; Nanocomposites; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyvinyls; Silicon Compounds; Silicon Dioxide; Siloxanes; Spectrophotometry; Surface Properties; Time Factors; Titanium

2013
The effect of different surface treatments on the shear bond strength of luting cements to titanium.
    The Journal of prosthetic dentistry, 2012, Volume: 108, Issue:6

    Topics: Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Carbon Compounds, Inorganic; Composite Resins; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Dental Polishing; Dental Stress Analysis; Glass Ionomer Cements; Humans; Materials Testing; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Shear Strength; Silanes; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Titanium; Water

2012
Effect of surface treatment on bond strength of Ti-10Ta-10Nb to low-fusing porcelain.
    The Journal of prosthetic dentistry, 2013, Volume: 109, Issue:2

    Topics: Acid Etching, Dental; Alloys; Aluminum Oxide; Carbon Compounds, Inorganic; Dental Alloys; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Elastic Modulus; Hot Temperature; Humans; Hydrochloric Acid; Hydrofluoric Acid; Materials Testing; Metal Ceramic Alloys; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Niobium; Nitric Acid; Pliability; Silicon Compounds; Stress, Mechanical; Surface Properties; Tantalum; Time Factors; Titanium

2013
Effect of surface pretreatments on the bonding strength and durability of self-adhesive resin cements to machined titanium.
    The Journal of prosthetic dentistry, 2013, Volume: 109, Issue:2

    Topics: Acid Etching, Dental; Algorithms; Aluminum Oxide; Carbon Compounds, Inorganic; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Stress Analysis; Hot Temperature; Humans; Hydrochloric Acid; Materials Testing; Methacrylates; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Resin Cements; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Titanium; Water

2013
Effects of sandblasting, H2SO4/HCl etching, and phosphate primer application on bond strength of veneering resin composite to commercially pure titanium grade 4.
    Dental materials journal, 2013, Volume: 32, Issue:2

    Topics: Acid Etching, Dental; Adhesiveness; Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Veneers; Humans; Hydrochloric Acid; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Nanopores; Polyurethanes; Resin Cements; Shear Strength; Silicon Compounds; Stress, Mechanical; Sulfuric Acids; Surface Properties; Temperature; Thiones; Time Factors; Titanium; Water

2013
Effect of particle deposition parameters on silica coating of zirconia using a chairside air-abrasion device.
    The journal of adhesive dentistry, 2013, Volume: 15, Issue:3

    Topics: Aluminum; Aluminum Oxide; Carbon Compounds, Inorganic; Dental Etching; Dental Materials; Humans; Materials Testing; Microscopy, Electron, Scanning; Oxygen; Pressure; Silicon; Silicon Compounds; Silicon Dioxide; Spectrometry, X-Ray Emission; Surface Properties; Time Factors; Zirconium

2013
Influence of different adherend materials and combinations on in vitro shear bond strength.
    Dental materials journal, 2013, Volume: 32, Issue:4

    Topics: Adhesiveness; Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Dental Bonding; Dental Etching; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Resin Cements; Shear Strength; Silanes; Silicon Compounds; Stress, Mechanical; Surface Properties

2013
Effect of different polishing systems and drinks on the color stability of resin composite.
    The journal of contemporary dental practice, 2013, Jul-01, Volume: 14, Issue:4

    Topics: Aluminum Oxide; Beverages; Carbon Compounds, Inorganic; Carbonated Beverages; Coffee; Color; Composite Resins; Dental Materials; Dental Polishing; Diamond; Fruit; Humans; Materials Testing; Nanocomposites; Polyethylene Terephthalates; Prunus; Silicon Compounds; Spectrophotometry; Sucrose; Surface Properties; Tea; Temperature; Time Factors; Water

2013
Effects of surface treatment and artificial aging on the shear bond strength of orthodontic brackets bonded to four different provisional restorations.
    The Angle orthodontist, 2014, Volume: 84, Issue:4

    Topics: Acrylic Resins; Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Crowns; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Restoration, Temporary; Dental Stress Analysis; Humans; Materials Testing; Orthodontic Brackets; Polymethacrylic Acids; Resin Cements; Shear Strength; Silicates; Silicon Compounds; Stainless Steel; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water

2014
Effect of polishing systems on stain susceptibility and surface roughness of nanocomposite resin material.
    The Journal of prosthetic dentistry, 2014, Volume: 112, Issue:3

    Topics: Aluminum Oxide; Beverages; Carbon Compounds, Inorganic; Coffee; Color; Composite Resins; Dental Materials; Dental Polishing; Diamond; Ferric Compounds; Fruit; Humans; Light-Curing of Dental Adhesives; Materials Testing; Nanocomposites; Polymerization; Silicon Compounds; Spectrophotometry; Surface Properties; Tea; Temperature; Time Factors; Titanium; Water

2014
Evaluation of experimental coating to improve the zirconia-veneering ceramic bond strength.
    Journal of prosthodontics : official journal of the American College of Prosthodontists, 2014, Volume: 23, Issue:8

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Ceramics; Coated Materials, Biocompatible; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Stress Analysis; Dental Veneers; Humans; Lasers, Solid-State; Materials Testing; Microscopy, Electron, Scanning; Shear Strength; Silicon Compounds; Stress, Mechanical; Surface Properties; Zirconium

2014
Effect of Er,Cr:YSGG laser treatment on microshear bond strength of zirconia to resin cement before and after sintering.
    The journal of adhesive dentistry, 2014, Volume: 16, Issue:4

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Dental Bonding; Dental Etching; Dental Polishing; Hot Temperature; Humidity; Lasers, Solid-State; Materials Testing; Microscopy, Electron, Scanning; Radiation Dosage; Resin Cements; Shear Strength; Silicon Compounds; Surface Properties; Temperature; Time Factors; Yttrium; Zirconium

2014
The strength of sintered and adhesively bonded zirconia/veneer-ceramic bilayers.
    Journal of dentistry, 2014, Volume: 42, Issue:10

    Topics: Acid Etching, Dental; Algorithms; Aluminum Oxide; Carbon Compounds, Inorganic; Cementation; Ceramics; Computer-Aided Design; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Dental Veneers; Elastic Modulus; Finite Element Analysis; Hot Temperature; Humans; Hydrofluoric Acid; Microscopy, Electron, Scanning; Phosphates; Pliability; Resin Cements; Silanes; Silicon Compounds; Stress, Mechanical; Surface Properties; Yttrium; Zirconium

2014
Effect of airborne-particle abrasion of presintered zirconia on surface roughness and bacterial adhesion.
    The Journal of prosthetic dentistry, 2015, Volume: 113, Issue:5

    Topics: Aluminum Oxide; Bacterial Adhesion; Carbon Compounds, Inorganic; Dental Etching; Dental Materials; Dental Polishing; Hot Temperature; Humans; Imaging, Three-Dimensional; Materials Testing; Pressure; Silicon Compounds; Streptococcus mutans; Surface Properties; Time Factors; Zirconium

2015
Evaluation of two disinfection/sterilization methods on silicon rubber-based composite finishing instruments.
    American journal of dentistry, 2015, Volume: 28, Issue:6

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Dental Disinfectants; Dental Materials; Dental Polishing; Dental Restoration, Permanent; Disinfection; Equipment Contamination; Hot Temperature; Humans; Imaging, Three-Dimensional; Immersion; Peracetic Acid; Silicon Compounds; Silicon Dioxide; Silicone Elastomers; Sterilization; Surface Properties; Time Factors

2015
Two pre-treatments for bonding to non-carious cervical root dentin.
    American journal of dentistry, 2015, Volume: 28, Issue:6

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dentin; Diamond; Humans; Humidity; Materials Testing; Resin Cements; Shear Strength; Silicon Compounds; Stress, Mechanical; Temperature; Time Factors; Tooth Root

2015
Structural and Morphological Evaluation of Presintered Zirconia following Different Surface Treatments.
    The journal of contemporary dental practice, 2018, Feb-01, Volume: 19, Issue:2

    Topics: Air Abrasion, Dental; Aluminum Oxide; Carbon Compounds, Inorganic; Ceramics; Dental Materials; Glass; Materials Testing; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Particle Size; Phase Transition; Pressure; Shear Strength; Silicon Compounds; Surface Properties; X-Ray Diffraction; Zirconium

2018
Speed of sound in the IEC tissue-mimicking material and its maintenance solution as a function of temperature.
    Ultrasonics, 2022, Volume: 118

    Topics: Aluminum Oxide; Benzalkonium Compounds; Biomimetic Materials; Calibration; Carbon Compounds, Inorganic; Equipment Safety; Glycerol; Phantoms, Imaging; Silicon Compounds; Sound; Temperature; Ultrasonic Therapy; Ultrasonography; Water

2022
Oil-in-water emulsion separation: Fouling of alumina membranes with and without a silicon carbide deposition in constant flux filtration mode.
    Water research, 2022, Jun-01, Volume: 216

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Emulsions; Filtration; Membranes, Artificial; Oils; Silicon Compounds; Water; Water Purification

2022