silicon and perovskite

Perovskite quantum dots (PQDs) are extremely unstable in ambient air due to their inherent structural instability, which limits the wide application of PQDs. In this work, silicon-coated CsPbBr

Topics: Fluorescence; Glucose; Humans; Hydrogen-Ion Concentration; Oxygen; Quantum Dots; Silicon; Silicon Dioxide; Water

Topics: Calcium Compounds; Lead; Oxides; Silicon

Topics: Calcium Compounds; Oxides; Receptors, Chimeric Antigen; Silicon; Titanium

Globally, perovskite solar cells (PSCs) represent a third-generation photovoltaic technology that is being increasingly implemented and commercialized. However, the biological impacts of leachates from PSCs are poorly understood. Therefore, the aim of this study was to investigate the ecotoxicity of PSC leachates compared with that of commercial Si-based solar cell (SBSC) leachates. We performed leaching assessments and aquatic bioassays using internationally recommended test species and measured and compared the ecotoxicity of PSC and SBSC leachates. As a result of the leaching analyses, Si, Pb, and Al were found to be the most leached elements from broken PSCs and SBSCs. The bioassays indicated that polycrystalline SBSC (p-Si) and monocrystalline SBSC (m-Si) leachates were more toxic to fish embryos than the PSC leachates and that water fleas were sensitive to m-Si leachates, but less sensitive to PSC and p-Si leachates. In addition, principle component analyses indicated that the ecotoxicity of solar cell leachates was related to either the Pb or Si content. This is the first comparative study of the potential ecotoxicity of PSC and SBSC leachates in aquatic ecosystems, and the results of which can be used in the environmentally safe commercialization of solar cells.

Topics: Animals; Calcium Compounds; Ecosystem; Oxides; Silicon; Titanium; Water Pollutants, Chemical

Topics: Calcium Compounds; Oxides; Silicon; Titanium

High quality electron-transport layer (ETL) with superior optical and electrical properties is an essential part in high efficient perovskite solar cells (PSCs). In this work, SiW

Topics: Calcium Compounds; Electric Conductivity; Microscopy, Electron, Scanning; Oxides; Silicon; Spectroscopy, Fourier Transform Infrared; Thermogravimetry; Titanium; Tungsten; X-Ray Diffraction

Atomic layer deposition (ALD) is a commercially utilized deposition method for electronic materials. ALD growth of thin films offers thickness control and conformality by taking advantage of self-limiting reactions between vapor-phase precursors and the growing film. Perovskite oxides present potential for next-generation electronic materials, but to-date have mostly been deposited by physical methods. This work outlines a method for depositing SrTiO3 (STO) on germanium using ALD. Germanium has higher carrier mobilities than silicon and therefore offers an alternative semiconductor material with faster device operation. This method takes advantage of the instability of germanium's native oxide by using thermal deoxidation to clean and reconstruct the Ge (001) surface to the 2×1 structure. 2-nm thick, amorphous STO is then deposited by ALD. The STO film is annealed under ultra-high vacuum and crystallizes on the reconstructed Ge surface. Reflection high-energy electron diffraction (RHEED) is used during this annealing step to monitor the STO crystallization. The thin, crystalline layer of STO acts as a template for subsequent growth of STO that is crystalline as-grown, as confirmed by RHEED. In situ X-ray photoelectron spectroscopy is used to verify film stoichiometry before and after the annealing step, as well as after subsequent STO growth. This procedure provides framework for additional perovskite oxides to be deposited on semiconductors via chemical methods in addition to the integration of more sophisticated heterostructures already achievable by physical methods.

Topics: Calcium Compounds; Crystallization; Germanium; Oxides; Photoelectron Spectroscopy; Semiconductors; Silicon; Strontium; Titanium

Epitaxially grown functional perovskites on silicon (001) and the ferroelectricity of a 3.2 nm thick BaTiO3 barrier layer are demonstrated. The polarization-switching-induced change in tunneling resistance is measured to be two orders of magnitude. The obtained results suggest the possibility of integrating ferroelectric tunnel junctions as binary data storage media in non-volatile memory cells on a silicon platform.

Topics: Barium Compounds; Calcium Compounds; Microscopy, Electron, Scanning Transmission; Oxides; Silicon; Spectrum Analysis; Titanium

Perovskite-on-silicon tandem solar cells show potential to reach > 30% conversion efficiency, but require careful optical control. We introduce here an effective light-management scheme based on the established pyramidal texturing of crystalline silicon cells. Calculations show that conformal deposition of a thin film perovskite solar cell directly onto the textured front surface of a high efficiency silicon cell can yield front surface reflection losses as low as 0.52mA/cm(2). Combining this with a wavelength-selective intermediate reflector between the cells additionally provides effective light-trapping in the high-bandgap top cell, resulting in calculated absolute efficiency gains of 2 - 4%. This approach provides a practical and effective method to adapt existing high efficiency silicon cell designs for use in tandem cells, with conversion efficiencies approaching 35%.

Topics: Calcium Compounds; Computer Simulation; Computer-Aided Design; Electric Power Supplies; Equipment Design; Equipment Failure Analysis; Lenses; Light; Models, Chemical; Oxides; Refractometry; Scattering, Radiation; Silicon; Solar Energy; Surface Plasmon Resonance; Titanium

Inspired by biological neural systems, neuromorphic devices may open up new computing paradigms to explore cognition, learning and limits of parallel computation. Here we report the demonstration of a synaptic transistor with SmNiO₃, a correlated electron system with insulator-metal transition temperature at 130°C in bulk form. Non-volatile resistance and synaptic multilevel analogue states are demonstrated by control over composition in ionic liquid-gated devices on silicon platforms. The extent of the resistance modulation can be dramatically controlled by the film microstructure. By simulating the time difference between postneuron and preneuron spikes as the input parameter of a gate bias voltage pulse, synaptic spike-timing-dependent plasticity learning behaviour is realized. The extreme sensitivity of electrical properties to defects in correlated oxides may make them a particularly suitable class of materials to realize artificial biological circuits that can be operated at and above room temperature and seamlessly integrated into conventional electronic circuits.

Topics: Animals; Artificial Intelligence; Calcium Compounds; Electric Conductivity; Electrons; Humans; Ionic Liquids; Models, Neurological; Neurons; Nickel; Oxides; Silicon; Synapses; Titanium; Transistors, Electronic

We investigate high-P,T phase equilibria of the MgSiO(3)-Al(2)O(3) system by means of the density functional ab initio computation methods with multiconfiguration sampling. Being different from earlier studies based on the static substitution properties with no consideration of Rh(2)O(3)(II) phase, present calculations demonstrate that (i) dissolving Al(2)O(3) tends to decrease the postperovskite transition pressure of MgSiO(3) but the effect is not significant ( approximately -0.2 GPa/mol% Al(2)O(3)); (ii) Al(2)O(3) produces the narrow perovskite+postperovskite coexisting P,T area (approximately 1 GPa) for the pyrolitic concentration (x(Al2O3) approximately 6 mol%), which is sufficiently responsible to the deep-mantle D'' seismic discontinuity; (iii) the transition would be smeared (approximately 4 GPa) for the basaltic Al-rich composition (x(Al2O3) approximately 20 mol%), which is still seismically visible unless iron has significant effects; and last (iv) the perovskite structure spontaneously changes to the Rh(2)O(3)(II) with increasing the Al concentration involving small displacements of the Mg-site cations.

Topics: Aluminum; Calcium Compounds; Crystallography; Earth, Planet; Geology; Magnesium; Models, Chemical; Oxides; Oxygen; Silicon; Thermodynamics; Titanium

Topics: Calcium Compounds; Materials Testing; Microscopy, Atomic Force; Nanotechnology; Oxides; Silicon; Strontium; Titanium

On the ceiling of the Oriental hornet comb cell, there are mineral granules of polycrystalline material known to belong to the group of perovskites. In a comb cell intended to house a worker hornet, the roof base usually carries one or several such perovskite granules containing titanium (Ti), whereas in the roof base of a cell housing a developing queen, there are usually several granules containing a high percentage of silicon (Si), aluminum (Al), calcium (Ca), and iron (Fe), but very little if any Ti. In worker comb cells, Ti usually appears as ilmenite (FeTiO3). Besides documenting the above-mentioned facts, this report discusses possible reasons for the appearance of ilmenite crystals in worker cells only and not in queen cells.

Topics: Aluminum; Animals; Calcium Compounds; Crystallization; Hymenoptera; Iron; Microscopy, Electron, Scanning; Oxides; Silicon; Titanium