silicon and nickel-monoxide

Bacterial infections have become a severe threat to human health and antibiotics have been developed to treat them. However, extensive use of antibiotics has led to multidrug-resistant bacteria and reduction of their therapeutic effects. An efficient solution may be localized application of antibiotics using a drug delivery system. For clinical application, they need to be biodegradable and should offer a prolonged antibacterial effect. In this study, a new injectable and visible-light-crosslinked hyaluronic acid (HA) hydrogel loaded with silicon (Si)-based nickel oxide (NiO) nanoflowers (Si@NiO) as an antibacterial scaffold was developed. Si@NiO nanoflowers were synthesized using chemical bath deposition before encapsulating them in the HA hydrogel under a mild visible-light-crosslinking conditions to generate a Si@NiO-hydrogel. Si@NiO synthesis was confirmed using scanning electron microscopy, transmission electron microscopy, and powder X-ray diffraction. As-prepared Si@NiO-hydrogel exhibited enhanced mechanical properties compared to a control bare hydrogel sample. Moreover, Si@NiO-hydrogel exhibits excellent antibacterial properties against three bacterial strains (P. aeruginosa, K. pneumoniae, and methicillin-resistant Staphylococcus aureus (>99.9% bactericidal rate)) and negligible cytotoxicity toward mouse embryonic fibroblasts. Therefore, Si@NiO-hydrogel has the potential for use in tissue engineering and biomedical applications owing to its injectability, visible-light crosslink ability, degradability, biosafety, and superior antibacterial property.

Topics: Animals; Anti-Bacterial Agents; Fibroblasts; Hyaluronic Acid; Hydrogels; Light; Methicillin-Resistant Staphylococcus aureus; Mice; Nickel; Pseudomonas aeruginosa; Silicon; Silicon Dioxide

We report a doping strategy, where nickel oxide (NiO) nanoparticle film coating is employed for graphene/Si heterojunction solar cells to improve the power conversion efficiency (PCE). NiO doping has been shown to improve the short circuit current (J(SC)) by 12%, open circuit voltage (V(OC)) by 25% and fill factor (FF) by 145% of the cells, in turn increasing the PCE from 1.37% to 4.91%. Furthermore, NiO doped graphene/Si solar cells don't show any significant performance degradation over 10 days revealing that NiO doping can be a promising approach for practical applications of graphene in solar cells.

Topics: Graphite; Nickel; Silicon; Solar Energy

A novel photoelectrochemical hydrogen peroxide (H2O2) sensor was constructed with platinum (Pt) and nickel hydroxyl-oxide (NiOOH) double layers modified n-silicon electrode (NiOOH/Pt/n-n(+)-Si). About 40nm Pt layer and about 100nm Ni layer were successively coated on the front surface of n-n(+)-Si (111) wafers by vacuum evaporating. A stable layer of NiOOH was formed through oxidation of the Ni layer on the coated silicon wafer by the electrochemical method. The surface of modified electrode was characterized by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The NiOOH/Pt/n-n(+)-Si electrode has been used for determination of H2O2 with a two-electrode cell in the absence of reference electrode by photocurrent measurement at a zero bias. The photoelectrochemical sensor showed a good linear response to H2O2 concentrations in a range from 1.0×10(-5) to 6×10(-5)M with a determination limit (S/N=3) of 2.2μM. The NiOOH/Pt/n-n(+)-Si electrode exhibited excellent reproducibility and stability. Particularly, the facile measurement requirements made this novel modified electrode promising for the development of outdoor H2O2 sensors.

Topics: Biosensing Techniques; Carbon; Electrochemical Techniques; Electrodes; Hydrogen Peroxide; Hydrogen-Ion Concentration; Hydroxyl Radical; Metal Nanoparticles; Nickel; Oxidation-Reduction; Photoelectron Spectroscopy; Silicon; Solutions

Highly ordered NiO coated Si nanowire array films are fabricated as electrodes for a high performance lithium ion battery via depositing Ni on electroless-etched Si nanowires and subsequently annealing. The structures and morphologies of as-prepared films are characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. When the potential window versus lithium was controlled, the coated NiO can be selected to be electrochemically active to store and release Li+ ions, while highly conductive crystalline Si cores function as nothing more than a stable mechanical support and an efficient electrical conducting pathway. The hybrid nanowire array films exhibit superior cyclic stability and reversible capacity compared to that of NiO nanostructured films. Owing to the ease of large-scale fabrication and superior electrochemical performance, these hybrid nanowire array films will be promising anode materials for high performance lithium-ion batteries.

Topics: Crystallization; Electric Power Supplies; Electrodes; Equipment Design; Equipment Failure Analysis; Ions; Lithium; Membranes, Artificial; Nanostructures; Nanotechnology; Nickel; Particle Size; Silicon

Two-dimensional nanostructures have various interesting applications due to their large surface areas. In this study, we propose a simple approach to synthesize two-dimensional NiO nano honeycomb by thermal annealing of Ni thin film deposited onto silicon substrate by thermal evaporation. The effects on the nano honeycomb morphology of the annealing temperature and time are investigated. Because the NiO nano honeycomb is realized onto silicon substrate, a basic material for microelectronics and micro-system, this will probably open the door to integrate the nano honeycomb into micro-system, thus leading to nano based functional devices. The as-synthesized NiO nano honeycomb is characterized by SEM, XRD, and surface area measurement.

Topics: Crystallization; Hot Temperature; Macromolecular Substances; Materials Testing; Membranes, Artificial; Molecular Conformation; Nanostructures; Nanotechnology; Nickel; Particle Size; Silicon; Surface Properties