salicylates and enzacamene

Today, topical application of sunscreens, containing ultraviolet-filters (UV-filters), is preferred protection against adverse effects of ultraviolet radiation. Evidently, use of sunscreens is effective in prevention of sunburns in various models. However, evidence for their protective effects against melanoma skin cancer is less conclusive. Three important observations prompted us to review the animal data and human studies on possible side effects of selected chemical UV-filters in cosmetics. (1) the utilization of sunscreens with UV-filters is increasing worldwide; (2) the incidence of the malignant disorder for which sunscreens should protect, malignant melanoma, is rapidly increasing and (3) an increasing number of experimental studies indicating that several UV-filters might have endocrine disruptive effects. The selected UV-filters we review in this article are benzophenone-3 (BP-3), 3-benzylidene camphor (3-BC), 3-(4-methyl-benzylidene) camphor (4-MBC), 2-ethylhexyl 4-methoxy cinnamate (OMC), Homosalate (HMS), 2-ethylhexyl 4-dimethylaminobenzoate (OD-PABA) and 4-aminobenzoic acid (PABA). The potential adverse effects induced by UV-filters in experimental animals include reproductive/developmental toxicity and disturbance of hypothalamic-pituitary-thyroid axis (HPT). Few human studies have investigated potential side effects of UV-filters, although human exposure is high as UV-filters in sunscreens are rapidly absorbed from the skin. One of the UV-filters, BP-3, has been found in 96% of urine samples in the US and several UV-filters in 85% of Swiss breast milk samples. It seems pertinent to evaluate whether exposure to UV-filters contribute to possible adverse effects on the developing organs of foetuses and children.

Topics: 4-Aminobenzoic Acid; Animals; Benzyl Compounds; Camphor; Cinnamates; Endocrine Disruptors; Humans; Hypothalamo-Hypophyseal System; Melanoma; para-Aminobenzoates; Receptors, Estrogen; Salicylates; Skin Neoplasms; Sunburn; Sunscreening Agents; Thyroid Gland; Ultraviolet Rays

Introduced in the 1930s, the sun filters (chemical screens) are very widely used as they are contained in photo-protective creams and in many other cosmetics. Allergy to sun filters seems to be rare in the general population (< 2%), but more frequent in populations which are suspected of photo-dermatosis (2 to 25%). It is composed of contact allergies, but also photo contact allergies in 45 to 85% of cases. Photo-biological exploration is comprised of application of photopatches and thus is necessary together with epidermotests. Crossed allergies, though rare, may be seen between filters, but also with substances that have a close chemical structure. Treatment such as prevention, if photo-protection is necessary, rest in discarding the causal filter and use of non-allergenic mineral screens.

Topics: 4-Aminobenzoic Acid; Benzimidazoles; Benzoates; Benzophenones; Camphor; Chalcones; Cinnamates; Cross Reactions; Dermatitis, Photoallergic; Diagnosis, Differential; Drug Eruptions; Humans; ortho-Aminobenzoates; Patch Tests; Prevalence; Salicylates; Sunscreening Agents; Ultraviolet Rays

The human population is widely exposed to benzophenone-3 (BP-3), octylmethoxycinnamate (OMC), 4-methylbenzilidenecamphor (4-MBC) and homosalate from their use in consumer goods to absorb ultraviolet (UV) light. Their oestrogenic activity and presence in human milk suggest a potential to influence breast cancer development. In this study, high-performance liquid chromatography-tandem mass spectrometry was used to measure concentrations of these UV filters in human breast tissue from three serial locations across the breast from 40 women undergoing mastectomy for primary breast cancer. One or more of these UV filters were quantifiable in 101 of 120 (84%) of the tissue samples and at least one breast region for 38 of 40 women. BP-3 was measured in 83 of 120 (69%) tissue samples and at least one breast region for 33 of 40 women (range 0-26.0 ng g

Topics: Benzophenones; Breast; Breast Neoplasms; Camphor; Cinnamates; Female; Humans; Mastectomy; Salicylates; Sunscreening Agents

A simple, sensitive and selective method for the simultaneous determination of five ultraviolet (UV) filters: benzophenone, octyl salicylate, homosalate, 3-(4-methylbenzylidene) camphor, 2-hydroxy-4-methoxybenzophenone in aqueous samples was developed. The analytes were extracted by plunger-in-needle solid-phase microextraction with graphene as sorbent, then silylated on-fiber with N-methyl-N-(trimethylsilyl)trifluoroacetamide, and analyzed by gas chromatography-mass spectrometry. Factors affecting the performance of extraction and derivatization steps were thoroughly evaluated. For the optimization of extraction conditions, six relevant factors (parameters) were investigated, including sample pH, salt concentration, extraction time, extraction temperature, stirring speed and sampling mode. In the first stage, a two-level orthogonal array design OA(8) (2(7)) matrix was employed to study the effect of six factors. Based on the results of the first stage, three factors were selected for further optimization with a univariant approach during the second stage. Under the final optimized conditions, the method limits of detection for the five UV filters were determined to be in the range of 0.5 and 6.8 ng L(-1) (at a signal/noise ratio of 3) and the precision (% relative standard deviation, n=5) was 0.8-5.6% at a concentration level of 1 μg L(-1). The linearities for different analytes were 10-10,000 or 1-5000 ng L(-1). The coefficients of determination for the calibration curves were all greater than 0.994. Finally, the proposed method was successfully applied to the extraction and determination of the UV filters in river water samples.

Topics: Adsorption; Algorithms; Benzophenones; Calibration; Camphor; Fresh Water; Gas Chromatography-Mass Spectrometry; Graphite; Limit of Detection; Phase Transition; Salicylates; Solid Phase Microextraction; Sunscreening Agents; Ultraviolet Rays; Water Pollutants, Chemical

A simple, inexpensive sample preparation procedure, based on the matrix solid-phase dispersion (MSPD) technique, for the determination of six UV filters: 2-ethylhexyl salicylate (EHS), 3,3,5-trimethylcyclohexyl salicylate (Homosalate, HMS), 3-(4-methylbenzylidene) camphor (4-MBC), isoamyl-p-methoxycinnamate (IAMC), 2-ethylhexyl-p-methoxycinnamate (EHMC) and octocrylene (OCR), in dust from indoor environments is presented and the influence of several operational parameters on the extraction performance discussed. Under the final working conditions, sieved samples (0.5 g) were mixed with the same amount of anhydrous sodium sulphate and dispersed with 2 g of octadecyl bonded silica (C18) in a mortar with a pestle. This blend was transferred to a polypropylene solid-phase extraction cartridge containing 2 g of activated silica, as the clean-up co-sorbent. The cartridge was first rinsed with 5 mL of n-hexane and the analytes were then recovered with 4 mL of acetonitrile. This extract was adjusted to 1 mL, filtered and the compounds were determined by gas chromatography combined with tandem mass spectrometry (GC-MS/MS). Recoveries for samples spiked at two different concentrations ranged between 77% and 99%, and the limits of quantification (LOQs) of the method between 10 and 40 ng g(-1). Analysis of settled dust from different indoor areas, including private flats, public buildings and vehicle cabins, showed that EHMC and OCR were ubiquitous in this matrix, with maximum concentrations of 15 and 41 microg g(-1), respectively. Both UV filters were also quantified in dust reference material SRM 2585 for first time. EHS, 4-MBC and IAMC were detected in some of the analyzed samples, although at lower concentrations than EHMC and OCR.

Topics: Acetonitriles; Acrylates; Air Pollution, Indoor; Camphor; Cinnamates; Dust; Gas Chromatography-Mass Spectrometry; Salicylates; Sensitivity and Specificity; Solid Phase Extraction; Sunscreening Agents; Tandem Mass Spectrometry

Stir bar sorptive extraction (SBSE) in combination with thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) was applied for the determination of 9 UV filters in water samples. The stir bar coated with polydimethylsiloxane (PDMS) was added to 20 mL of water sample at pH 2 (10% MeOH) and stirred at 1000 rpm for 180 min. Then, the stir bar was subjected to TD-GC-MS. The desorption conditions (desorption temperature and desorption time) and SBSE parameters (ionic strength, pH, presence of organic solvent and time) were optimised using a full factorial design and a Box-Behnken design, respectively. The method shows good linearity (correlation coefficients >0.994) and reproducibility (RSD<16%). The extraction efficiencies were above 63% for all the compounds. Detection limits were between 0.2 and 63 ng/L. The developed method offers the ability to detect several UV filters at ultra-low concentration levels with only 20 mL of sample volume. The effectiveness of the method was tested by analysing real samples such as lake water, river water and treated wastewater. The application of the method allowed reporting the levels of UV filters in environmental water samples.

Topics: Acrylates; Adsorption; Camphor; Chemical Fractionation; Cinnamates; Gas Chromatography-Mass Spectrometry; Hot Temperature; Reproducibility of Results; Salicylates; Sunscreening Agents; Ultraviolet Rays; Water Pollutants, Chemical

Development of photostable sunscreens is extremely important to preserve the UV protective capacity and to prevent the reactive intermediates of photounstable filter substances behaving as photo-oxidants when coming into direct contact with the skin. Thus, the objective of this study was to evaluate the photostability of four different UV filter combinations in a sunscreen by using HPLC analysis and spectrophotometry. The formulations that were investigated included four different UV filter combinations often used in SPF 15 sunscreens. The UV filter combinations were: octyl methoxycinnamate (OMC), benzophenone-3 (BP-3) and octyl salicylate (OS) (formulation 1); OMC, avobenzone (AVB) and 4-methylbenzilidene camphor (MBC) (formulation 2); OMC, BP-3 and octocrylene (OC) (formulation 3); OMC, AVB and OC (formulation 4). In the photostability studies, 40 mg of each formulation were spread onto a glass plate and left to dry before exposure to different UVA/UVB irradiation. Exposed samples were then immersed in isopropanol and the dried film dissolved ultrasonically. The filter components in the resulting solution were quantified by HPLC analysis with detection at 325 nm and by spectrophotometry. In this study, the four UV filter combinations showed different photostability profiles and the best one was formulation 3 (OMC, BP-3 and OC), followed by formulations 4, 1 and 2. In addition, OC improved the photostability of OMC, AVB and BP-3.

Topics: Acrylates; Benzophenones; Camphor; Chalcones; Chemistry, Pharmaceutical; Chromatography, High Pressure Liquid; Cinnamates; Drug Stability; Photochemistry; Propiophenones; Salicylates; Spectrophotometry; Sunscreening Agents; Time Factors; Ultraviolet Rays

An assay for testing the binding of haptens to antigen-presenting cells was developed. The test consists of consecutive incubation of macrophages with the tested hapten, followed by incubation with a radioactively labeled standard. If the first hapten occupies a certain number of binding sites, the other one (radioactively labeled standard) reveals reduced binding. The binding assay in the present modification is fully suitable for measuring the binding of water-soluble haptens. It was found that from a panel of tested haptens, DNFB, beta-bromostyrol and phenylacetaldehyde exhibit strong binding.

Topics: Acetaldehyde; Aldehydes; Animals; Binding, Competitive; Camphor; Coumarins; Dinitrofluorobenzene; Ethanol; Female; Guinea Pigs; Macrophages; Radioligand Assay; Receptors, Antigen; Salicylates; Styrenes; Surface-Active Agents