safranine-t and malachite-green

Xenobiotic pollution in environment is a potential risk to marine life, and human health. Nanobiotechnology is an advanced and emerging solution for the removal of environmental pollutants. Adsorption-based technologies are being used to alleviate the global prevalence of xenobiotics like dyes, due to their high efficacy and cost effectiveness. Current study explored the potential of nanobiochar syntehsized via ultrasonication and centrifugation from rice husk for dye removal from water. It involves the synthesis of nanobiochar from rice husk biochar for removal of Safranin, Malachite green, and a mixture of both from aqueous water. Biochar was synthesized through pyrolysis at 600 °C for 2 h. To convert it into nanobiochar, sonication and centrifugation techniques were applied. The yield obtained was 27.5% for biochar and 0.9% for nanobiochar. Nanobiochar analysis through Fourier-Transform Spectrometer (FTIR), X-ray Power Diffraction (XRD) and scanning electron microscopy (SEM) suggested its crystalline nature having minerals rich in silicon, with a cracked and disintegrated carbon structure due to high temperature and processing treatments. Removal of dyes by nanobiochar was evaluated by changing different physical parameters i.e., nanobiochar dose, pH, and temperature. Pseudo-first order model and pseudo-second order model were applied to studying the adsorption kinetics mechanism. Kinetics for adsorption of dyes followed the pseudo-second order model suggesting the removal of dyes by process of chemical sorption. High adsorption was found at a higher concentration of nanobiochar, high temperature, and neutral pH. Maximum elimination percentages of safranin, malachite green, and a mixture of dyes were obtained as 91.7%, 87.5%, and 85% respectively. We conclude that nanobiochar could be a solution for dye removal from aqueous media.

Topics: Adsorption; Coloring Agents; Humans; Hydrogen-Ion Concentration; Kinetics; Oryza; Water; Water Pollutants, Chemical

A novel nanocomposite (cl-Ch-pMAc@ZnO/CdSQDs) has been developed under microwave irradiation via fabrication of ZnO/CdS quantum dots on anionically functionalized chitosan [i.e. poly (methacrylic acid) crosslinked chitosan (cl-Ch-pMAc) in the presence of diethylene glycol dimethacrylate (DEGDMA) crosslinker]. The structural, morphological and chemical/physical properties of crosslinked chitosan and the nanocomposites have been investigated using

Topics: Anti-Bacterial Agents; Bacillus subtilis; Cadmium Compounds; Catalysis; Chitosan; Chlorophenols; Chromatography, Liquid; Drug Design; Escherichia coli; Ethylene Glycols; Magnetic Resonance Spectroscopy; Mass Spectrometry; Microbial Sensitivity Tests; Microscopy, Electron, Transmission; Nanocomposites; Phenazines; Photochemical Processes; Photoelectron Spectroscopy; Polymethacrylic Acids; Quantum Dots; Rosaniline Dyes; Sulfides; Sunlight; X-Ray Diffraction; Zinc Oxide

Marine algae Ulva lactuca (ULV-AC) and Systoceira stricta (SYS-AC) based activated carbons were investigated as potential adsorbents for the removal of hazardous cationic dyes. Both algae were surface oxidised by phosphoric acid for 2 and subsequently air activated at 600 °C for 3 h. Dyes adsorption parameters such as solution pH, contact time, carbon dosage, temperature and ionic strength were measured in batch experiments. Adsorption capacities of 400 and 526 mg/g for Malachite green and Safranine O by the SYS-AC and ULV-AC respectively were significantly enhanced by the chemical treatments. Model equations such as Langmuir, Freundlich and Temkin isotherms were used to analyse the adsorption equilibrium data and the best fits to the experimental data were provided by the first two isotherm models. BET, FT-IR, iodine number and methylene blue index determination were also performed to characterize the adsorbents. To describe the adsorption mechanism, kinetic models such as pseudo-second-order and the intra particle diffusion were applied. Thermodynamic analysis of the adsorption processes of both dyes confirms their spontaneity and endothermicity. Increasing solution ionic strength increased significantly the adsorption of Safranine O. This study shows that surface modified algae can be an alternative to the commercially available adsorbents for dyes removal from liquid effluents.

Topics: Adsorption; Carbon; Charcoal; Coloring Agents; Hydrogen-Ion Concentration; Industrial Waste; Methylene Blue; Osmolar Concentration; Phaeophyceae; Phenazines; Rosaniline Dyes; Spectroscopy, Fourier Transform Infrared; Temperature; Ulva; Waste Disposal, Fluid; Water Pollutants, Chemical

Mesoporous materials can play a pivotal role as a host material for delivery application to a specific part of a system. In this work we explore the selective adsorption and release of cationic organic dye molecules such as safranine T (ST) and malachite green (MG) on mesoporous borosilicate materials. The mesoporous silica SBA-15 and borosilicate materials (MBS) were prepared using non-ionic surfactant Pluronic P123 as template via evaporation induced self-assembly (EISA) method. After template removal the materials show high surface areas and in some cases ordered mesopores of dimensions ca. 6-7 nm. High surface area, mesoporosity and the presence of heteroatom (boron) help this mesoporous borosilicate material to adsorb high amount of cationic dye molecules at its surface from the respective aqueous solutions. Furthermore, the mesoporous borosilicate samples containing higher percentage adsorbed dyes show excellent release of ST or MG dye in simulated body fluid (SBF) solution at physiological pH=7.4 and temperature 310 K. The adsorption and release efficiency of mesoporous borosilicate samples are compared with reference boron-free mesoporous pure silica material to understand the nature of adsorbate-adsorbent interaction at the surfaces.

Topics: Adsorption; Body Fluids; Cations; Coloring Agents; Hydrogen-Ion Concentration; Phenazines; Poloxalene; Porosity; Rosaniline Dyes; Silicon Dioxide; Solutions; Surface-Active Agents; Temperature; Water