protegrin-1 and 1-palmitoyl-2-oleoylphosphatidylethanolamine

Electron microscopy and atomic force microscopy images of cholesterol-dependent cytolysins and related proteins that form large pores in lipid membranes have revealed the presence of incomplete rings, or arcs. Some evidence indicates that these arcs are inserted into the membrane and induce membrane leakage, but other experiments seem to refute that. Could such pores, only partially lined by protein, be kinetically and thermodynamically stable? How would the lipids be structured in such a pore? Using the antimicrobial peptide protegrin-1 as a model, we test the stability of pores only partially lined by peptide using all-atom molecular dynamics simulations in POPC and POPE/POPG membranes. The data show that, whereas pure lipid pores close rapidly, pores partially lined by protegrin arcs are stable for at least 300 ns. Estimates of the thermodynamic stability of these arcs using line tension data and implicit solvent calculations show that these arcs can be marginally stable in both zwitterionic and anionic membranes. Arcs provide an explanation for the observed ion selectivity in protegrin electrophysiology experiments and could possibly be involved in other membrane permeabilization processes where lipids are thought to participate, such as those induced by antimicrobial peptides and colicins, as well as the Bax apoptotic pore.

Topics: Amino Acid Sequence; Antimicrobial Cationic Peptides; Lipid Bilayers; Molecular Dynamics Simulation; Molecular Sequence Data; Phosphatidylethanolamines; Phosphatidylglycerols

Domain formation in bacteria-mimetic membranes due to cationic peptide binding was recently proposed based on calorimetric data. We now use (2)H solid-state NMR to critically examine the presence and absence of domains in bacterial membranes containing zwitterionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylethanolamine (POPE) and anionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol (POPG) lipids. Chain-perdeuterated POPE and POPG are used in single-component membranes, binary POPE/POPG (3:1) membranes, and membranes containing one of four cationic peptides: two antimicrobial peptides (AMPs) of the β-hairpin family of protegrin-1 (PG-1), and two cell-penetrating peptides (CPPs), HIV TAT and penetratin. (2)H quadrupolar couplings were measured to determine the motional amplitudes of POPE and POPG acyl chains as a function of temperature. Homogeneously mixed POPE/POPG membranes should give the same quadrupolar couplings for the two lipids, whereas the presence of membrane domains enriched in one of the two lipids should cause distinct (2)H quadrupolar couplings that reflect different chain disorder. At physiological temperature (308 K), we observed no or only small coupling differences between POPE and POPG in the presence of any of the cationic peptides. However, around ambient temperature (293 K), at which gel- and liquid-crystalline phases coexist in the peptide-free POPE/POPG membrane, the peptides caused distinct quadrupolar couplings for the two lipids, indicating domain formation. The broad-spectrum antimicrobial peptide PG-1 ordered ∼40% of the POPE lipids while disordering POPG. The Gram-negative selective PG-1 mutant, IB549, caused even larger differences in the POPE and POPG disorder: ∼80% of POPE partitioned into the ordered phase, whereas all of the POPG remained in the disordered phase. In comparison, TAT rigidified POPE and POPG similarly in the binary membrane at ambient temperature, indicating that TAT does not cause dynamic heterogeneity but interacts with the membrane with a different mechanism. Penetratin maintained the POPE order but disordered POPG, suggesting moderate domain separation. These results provide insight into the extent of domain formation in bacterial membranes and the possible peptide structural requirements for this phenomenon.

Topics: Amino Acid Sequence; Antimicrobial Cationic Peptides; Bacteria; Carrier Proteins; Cell Membrane; Cell-Penetrating Peptides; Magnetic Resonance Spectroscopy; Molecular Sequence Data; Phosphatidylethanolamines; Phosphatidylglycerols; tat Gene Products, Human Immunodeficiency Virus; Temperature

Molecular dynamics (MD) simulations are used to study the pathway for the insertion of the cationic antimicrobial peptide protegrin-1 (PG1) into mixed anionic lipid bilayers composed of palmitoyl-oleoyl-phosphatidylglycerol (POPG) and palmitoyl-oleoyl-phosphatidylethanolamine (POPE) in a 1:3 ratio (POPG/POPE). We calculate the potential of mean force (PMF) during the transfer of the peptide from the bulk aqueous phase to the transmembrane (TM) configuration using the adaptive biasing force (ABF) method. We find that the PMF has two energy minima separated by an energy barrier. One minimum corresponds to the fully transmembrane inserted state, with a free energy of -20.1 kcal/mol. The second PMF minimum, which corresponds to adsorption to the membrane surface, has a value of -2.5 kcal/mol. The PMF also shows the existence of a free energy barrier of +6.3 kcal/mol for the insertion process. Using the Kramers theory Langevin equation and the Grote-Hynes theory generalized Langevin equation, we calculated the transmission coefficient for PG1 diffusion through the potential barrier. We focus on the use of the PMF and the time correlation function of the fluctuation of the instantaneous force to calculate the rate constants for insertion/deinsertion of PG1 from the mixed POPG/POPE membrane. The influence of the activation free energy barrier on the dynamics of the insertion and permeation of peptides through the membrane are discussed.

Topics: Antimicrobial Cationic Peptides; Lipid Bilayers; Molecular Dynamics Simulation; Permeability; Phosphatidylethanolamines; Phosphatidylglycerols; Thermodynamics

The free energies of adsorption of the monomer or dimer of the cationic beta-hairpin antimicrobial peptide protegrin-1 (PG1) in a specific binding orientation on a lipid bilayer are determined using molecular dynamics (MD) simulations and Poisson-Boltzmann calculations. The bilayer is composed of anionic palmitoyl-oleoyl-phosphatidylglycerol (POPG) and palmitoyl-oleoyl-phosphatidylethanolamine (POPE) with ratio 1:3 (POPG/POPE). PG1 is believed to kill bacteria by binding on their membranes. There, it forms pores that lyse the bacteria. Herein we focus on the thermodynamics of binding. In particular, we explore the role of counterion release from the lipid bilayer upon adsorption of either the monomeric or the dimeric form of PG1. Twenty-two 4-ns-long MD trajectories of equilibrated systems are generated to determine the free energy profiles for the monomer and dimer as a function of the distance between the peptide(s) and the membrane surface. The MD simulations are conducted at 11 different separations from the membrane for each of the two systems, one with PG1, the second with a PG1 dimer of only a specific orientation of the monomer and dimer without taking into account the change of entropy for the peptide. To calculate the potential of mean force for each peptide/membrane system, a variant of constrained MD and thermodynamic integration is used. We observed that PG1 dimer binds more favorably to the POPG/POPE membrane. A simple method for relating the free energy profile to the PG1-membrane binding constant is employed to predict a free energy of adsorption of -2.4 +/- 0.8 kcal/mol. A corresponding PG1-dimer-membrane binding constant is calculated as -3.5 +/- 1.1 kcal/mol. Free energy profiles from MD simulation were extensively analyzed and compared with results of Poisson-Boltzmann theory. We find the peptide-membrane attraction to be dominated by the entropy increase due to the release of counterions in a POPG/POPE lipid bilayer.

Topics: Adsorption; Antimicrobial Cationic Peptides; Dimerization; Lipid Bilayers; Models, Chemical; Molecular Dynamics Simulation; Phosphatidylethanolamines; Phosphatidylglycerols; Thermodynamics

Antimicrobial peptides (AMPs) are an emerging class of antibiotics for controlling health effects of antibiotic-resistant microbial strains. Protegrin-1 (PG-1) is a model antibiotic among beta-sheet AMPs. Antibiotic activity of AMPs involves cell membrane damage, yet their membrane interactions, their 3D membrane-associated structures and the mechanism underlying their ability to disrupt cell membrane are poorly understood. Using complementary approaches, including molecular dynamics simulations, atomic force microscopy (AFM) imaging, and planar lipid bilayer reconstitution, we provide computational and experimental evidence that PG-1, a beta-hairpin peptide, forms ion channels. Simulations indicate that PG-1 forms channel-like structures with loosely attached subunits when reconstituted in anionic lipid bilayers. AFM images show the presence of channel-like structures when PG-1 is reconstituted in dioleoylphosphatidylserine/palmitoyloleoyl phosphatidylethanolamine bilayers or added to preformed bilayers. Planar lipid bilayer electrical recordings show multiple single channel conductances that are consistent with the heterogeneous oligomeric channel structures seen in AFM images. PG-1 channel formation seems to be lipid-dependent: PG-1 does not easily show ion channel electrical activity in phosphatidylcholine membranes, but readily shows channel activity in membranes rich in phosphatidylethanolamine or phosphatidylserine. The combined results support a model wherein the beta-hairpin PG-1 peptide acts as an antibiotic by altering cell ionic homeostasis through ion channel formation in cell membranes.

Topics: Animals; Antimicrobial Cationic Peptides; Electric Conductivity; Lipid Bilayers; Membrane Potentials; Microscopy, Atomic Force; Molecular Dynamics Simulation; Phosphatidylethanolamines; Phosphatidylserines; Probability; Protein Structure, Secondary; Swine

We have studied the influence of four antimicrobial peptides of different secondary and ternary structure--melittin (Mel), protegrin-1 (PG-1), peptidyl-glycylleucine-carboxyamide (PGLa), and gramicidin S (GS)--on the lamellar-to-nonlamellar transition of palmitoyloleoyl phosphatidylethanolamine (POPE) applying differential scanning calorimetry and small-angle X-ray diffraction. None of the peptides studied led to the formation of an inverted hexagonal phase observed for pure POPE at high temperatures. Instead either cubic or lamellar phases were stabilized to different degrees. GS was most effective in inducing a cubic phase, whereas Mel fully stabilized the lamellar phase. The behavior of POPE in the presence of PG-1 and PGLa was intermediate to GS and Mel. In addition to the known role of membrane elasticity we propose two mechanisms, which cause stabilization of the lamellar phase: electrostatic repulsion and lipid/peptide pore formation. Both mechanisms prevent transmembrane contact required to form either an inverted hexagonal phase or fusion pores, as precursors of the cubic phase.

Topics: Animals; Anti-Infective Agents; Antimicrobial Cationic Peptides; Calorimetry, Differential Scanning; Gramicidin; Lipids; Liposomes; Melitten; Models, Molecular; Phase Transition; Phosphatidylethanolamines; Protein Precursors; Protein Structure, Secondary; Protein Structure, Tertiary; X-Ray Diffraction

We conducted over 150 ns of simulation of a protegrin-1 octamer pore in a lipid bilayer composed of palmitoyloleoyl-phosphatidylethanolamine (POPE) and palmitoyloleoyl-phosphatidylglycerol (POPG) lipids mimicking the inner membrane of a bacterial cell. The simulations improve on a model of a pore proposed from recent NMR experiments and provide a coherent understanding of the molecular mechanism of antimicrobial activity. Although lipids tilt somewhat toward the peptides, the simulated protegrin-1 pore more closely follows the barrel-stave model than the toroidal-pore model. The movement of ions is investigated through the pore. The pore selectively allows negatively charged chloride ions to pass through at an average rate of one ion every two nanoseconds. Only two events are observed of sodium ions crossing through the pore. The potential of mean force is calculated for the water and both ion types. It is determined that the chloride ions move through the pore with ease, similarly to the water molecules with the exception of a zone of restricted movement midway through the pore. In bacteria, ions moving through the pore will compromise the integrity of the transmembrane potential. Without the transmembrane potential as a countermeasure, water will readily flow inside the higher osmolality cytoplasm. We determine that the diffusivity of water through a single PG-1 pore is sufficient to cause fast cell death by osmotic lysis.

Topics: Anti-Bacterial Agents; Antimicrobial Cationic Peptides; Candida albicans; Chlorides; Computer Simulation; Escherichia coli; Ion Transport; Lipid Bilayers; Listeria monocytogenes; Magnetic Resonance Spectroscopy; Microbial Sensitivity Tests; Models, Biological; Models, Molecular; Osmolar Concentration; Phosphatidylethanolamines; Phosphatidylglycerols; Protein Conformation; Proteins; Sodium; Time Factors; Water

The site-specific motion of Arg residues in a membrane-bound disulfide-linked antimicrobial peptide, protegrin-1 (PG-1), was investigated by using magic-angle-spinning solid-state NMR spectroscopy to better understand the membrane insertion and lipid interaction of this cationic membrane-disruptive peptide. The C-H and N-H dipolar couplings and 13C chemical shift anisotropies were measured in the anionic POPE/POPG membrane, and were found to be reduced from the rigid-limit values by varying extents; this indicates the presence of segmental motion. An Arg residue at the beta-turn region of the peptide showed much weaker spin interactions, which indicates larger amplitudes of motion than an Arg residue in the beta-strand region of the peptide. This is consistent with the exposure of the beta turn to the membrane surface and the immersion of the beta strand in the hydrophobic middle of the membrane, and supports the previously proposed oligomerization of the peptide into beta barrels in the anionic membrane. The 13C T2 and 1H T(1rho) relaxation times indicate that the beta-turn backbone undergoes large-amplitude intermediate-timescale motion in the fluid phase of the membrane; this causes significant line broadening and loss of spectral intensity. This study illustrates the strong correlation between the dynamics and structure of membrane proteins, and the capability of solid-state NMR spectroscopy to provide detailed information on site-specific dynamics in complex membrane-protein assemblies.

Topics: Antimicrobial Cationic Peptides; Arginine; Cations; Hydrophobic and Hydrophilic Interactions; Lipid Bilayers; Magnetic Resonance Spectroscopy; Movement; Phosphatidylethanolamines; Phosphatidylglycerols; Protein Structure, Secondary; Temperature; Time Factors

The insertion of charged amino acid residues into the hydrophobic part of lipid bilayers is energetically unfavorable yet found in many cationic membrane peptides and protein domains. To understand the mechanism of this translocation, we measured the (13)C-(31)P distances for an Arg-rich beta-hairpin antimicrobial peptide, PG-1, in the lipid membrane using solid-state NMR. Four residues, including two Arg's, scattered through the peptide were chosen for the distance measurements. Surprisingly, all residues show short distances to the lipid (31)P: 4.0-6.5 A in anionic POPE/POPG membranes and 6.5-8.0 A in zwitterionic POPC membranes. The shortest distance of 4.0 A, found for a guanidinium Czeta at the beta-turn, suggests N-H...O-P hydrogen bond formation. Torsion angle measurements of the two Arg's quantitatively confirm that the peptide adopts a beta-hairpin conformation in the lipid bilayer, and gel-phase 1H spin diffusion from water to the peptide indicates that PG-1 remains transmembrane in the gel phase of the membrane. For this transmembrane beta-hairpin peptide to have short (13)C-(31)P distances for multiple residues in the molecule, some phosphate groups must be embedded in the hydrophobic part of the membrane, with the local (31)P plane parallel to the beta-strand. This provides direct evidence for toroidal pores, where some lipid molecules change their orientation to merge the two monolayers. We propose that the driving force for this toroidal pore formation is guanidinium-phosphate complexation, where the cationic Arg residues drag the anionic phosphate groups along as they insert into the hydrophobic part of the membrane. This phosphate-mediated translocation of guanidinium ions may underlie the activity of other Arg-rich antimocrobial peptides and may be common among cationic membrane proteins.

Topics: Anti-Bacterial Agents; Antimicrobial Cationic Peptides; Arginine; Guanidine; Hydrogen Bonding; Lipid Bilayers; Magnetic Resonance Spectroscopy; Membrane Proteins; Models, Molecular; Organophosphates; Phosphatidylethanolamines; Phosphatidylglycerols; Protein Conformation; Proteins

Disulfide-bonded beta-hairpin structures are common among antimicrobial peptides. Disulfide bonds are known to be important for antimicrobial activity, but the underlying structural reason is not well understood. We have investigated the membrane-bound structure of a disulfide-deleted analogue of the antimicrobial peptide protegrin-1, in which the four Cys residues were replaced by Ala. The secondary structure, dynamics, and topology of this Ala-PG1 peptide in the membrane were determined by using magic-angle-spinning NMR spectroscopy. Conformation-dependent (13)C isotropic chemical shifts of multiple (13)C-labeled residues were obtained from 1D cross-polarization and direct-polarization spectra, and from 2D J-coupling-mediated (13)C-(13)C correlation spectra. Most labeled residues exhibited two conformations: a random coil and a beta-sheet structure. The dual-conformation property was present in both anionic lipid bilayers, which mimic the bacterial membrane, and zwitterionic cholesterol-containing bilayers, which mimic the eukaryotic cell membrane. The mobility of the peptide was measured by using a 2D C-H dipolar-shift correlation experiment. The random-coil fraction was highly mobile whereas the beta-sheet component was rigid. (1)H spin diffusion from the lipid chains to the peptide indicates that the beta-sheet component was well inserted into the anionic membrane, but surface bound in the cholesterol-containing neutral membrane. Thus, the removal of disulfide bonds changed some PG-1 molecules to highly mobile random coils that were poorly associated with the lipid membrane, but other molecules retained a beta-sheet conformation and had a similar membrane-binding topology to the parent peptide. Thus, the reduced antimicrobial activity of Ala-PG1 was largely due to the reduced number of insertion-competent beta-sheet molecules, rather than uniformly weakened activity of identically structured peptides.

Topics: Alanine; Amino Acid Sequence; Anti-Infective Agents; Antimicrobial Cationic Peptides; Carbon Radioisotopes; Cell Membrane; Cholesterol; Cysteine; Disulfides; Lipid Bilayers; Magnetic Resonance Spectroscopy; Molecular Sequence Data; Phosphatidylcholines; Phosphatidylethanolamines; Phosphatidylglycerols; Protein Conformation; Proteins