perlite and phthalic-acid

Conventional stormwater treatment techniques such as sedimentation and filtration are inefficient for removing the dissolved and colloidal phases of hydrophobic organic compounds (HOCs) present in stormwater. Adsorption could be a promising technique for removing colloidal and dissolved pollutants. Five low-cost sorbent materials were investigated in this project, including two minerals – vermiculite and perlite – and three waste products – two pine barks and a sawdust – as potential adsorbents for removal of polycyclic aromatic hydrocarbons (PAHs), alkylphenols and phthalates; HOCs commonly found in stormwater. Adsorption capacity and kinetics were studied through batch adsorption tests using synthetic stormwater spiked with a mixture of HOCs. Vermiculite and perlite exhibited insignificant removal of the organic contaminants. The three wood-based materials retained >80% of the initial HOC concentration (10-300 μg/L). The two barks exhibited slightly higher adsorption capacities of HOCs than the sawdust. For all compounds tested, maximum adsorption onto the wood-based media was reached in <10 min. The highest adsorption capacity was found for PAHs (up to 45 μg/g), followed by alkylphenols and phthalates. No correlation was found between adsorption capacity and physical-chemical parameters such as solubility and partition coefficients (log K(ow)). Agreement between empirical data and the pseudo-second order kinetic model suggest chemisorption of HOCs onto a monolayer on wood-based media. This could lead to early saturation of the materials and should be investigated in future studies through repeated adsorption of HOCs, for example in column studies.

Topics: Adsorption; Aluminum Oxide; Aluminum Silicates; Filtration; Hydrophobic and Hydrophilic Interactions; Phthalic Acids; Polycyclic Aromatic Hydrocarbons; Silicon Dioxide; Waste Products; Water Pollutants; Water Purification