oxytetracycline--anhydrous and peroxymonosulfate

In recent years, metal-free catalysts for persulfate-mediated oxidation processes have been widely applied to remove contaminants in the aquatic environment. Herein, a simple pyrolysis approach was used to synthesize the boron doped biochars (B@TBCs) derived from boric acid mixed with tea seed shells powders. The obtained B@TBCs exhibited fantastic capability to boost PMS (0.5 mM) activation for 90%∼ removal of oxytetracycline (OTC) within 20 min. Through the correlation analysis and DFT calculations, it was concluded that the apparent rate constant of pollutants removal was greatly related to the -O-B-O- groups on the biochars, which could improve the electron-donating capacity of the biochar. In addition, the degradation process of OTC was pH-dependent because of the changed roles of ROSs under different pH. Finally, according to the DFT calculation, LC-MS and toxicological analysis, the degradation pathways of pollutants and the toxicity changes during the degradation process were obtained. These findings consolidated the theoretical basis for further boosting the catalytic activity of B-doped biochars and expanded the imagination for the modification of other metal-free biochar catalysts for PMS activation.

Topics: Boron; Charcoal; Environmental Pollutants; Metals; Oxytetracycline; Peroxides

In this work, magnetic CuFe

Topics: Carbon; Magnetic Phenomena; Nanoparticles; Oxytetracycline; Peroxides; Water

It has been previously reported that pre-magnetization could enhance the efficacy of zero-valent iron (ZVI) in removing contaminants. However, little is known about the effects and persistence of different magnetization methods on pre-magnetized ZVI (Pre-ZVI) when used in advanced oxidation processes (AOPs). Gaining a comprehensive understanding of the durability of various pre-magnetization methods in enhancing the removal efficiency of different pollutants will significantly impact the widespread utilization of Pre-ZVI in practical engineering. Herein, we investigated the efficiency of dry and wet Pre-ZVI-activated peroxymonosulfate (PMS) in eliminating oxytetracycline (OTC) and evaluated the durability of Pre-ZVI. Additionally, we examined several factors that influence the degradation process's efficiency. Our results found that the reaction constant k values corresponding to the dry Pre-ZVI/PMS system at the pH values of 3, 7, and 9 varied from approximately 0.0384, 0.0331, and 0.0349 (day 1) to roughly 0.0297, 0.0278, and 0.0314 (day 30), respectively. Meanwhile, the wet Pre-ZVI/PMS system exhibited k values ranging from approximately 0.0392, 0.0349, and 0.0374 (day 1) to roughly 0.0380, 0.0291, and 0.0322 (day 30), respectively. Moreover, we proposed four OTC degradation pathways using LC-MS/MS and density functional theory calculations. The toxicity of the degradation products was assessed using the ecological structure activity relationship and the toxicity estimation software tool. Overall, this study provides insights into the application of Pre-ZVI/PMS that can be selectively used to eliminate tetracycline antibiotics from water.

Topics: Chromatography, Liquid; Iron; Oxytetracycline; Tandem Mass Spectrometry; Water Pollutants, Chemical

Oxytetracycline (OTC) is a broad-spectrum antibiotic that resists biodegradation and poses a risk to the ecosystem. This study investigated the degradation of OTC by heat-activated peroxydisulfate (PDS) and peroxymonosulfate (PMS) processes. Response surface methodology (RSM) was used to evaluate the effect of process parameters, namely initial pH, oxidant concentration, temperature, and reaction time on the OTC removal efficiency. According to the results of the RSM models, all four independent variables were significant for both PDS and PMS processes. The optimum process parameters for the heat-activated PDS process were pH 8.9, PDS concentration 3.9 mM, temperature 72.9°C, and reaction time 26.5 min. For the heat-activated PMS process, optimum conditions were pH 9.0, PMS concentration 4.0 mM, temperature 75.0°C, and reaction time 20.0 min. The predicted OTC removal efficiencies for the PDS and PMS processes were 89.7% and 84.0%, respectively. As a result of the validation experiments conducted at optimum conditions, the obtained OTC removal efficiencies for the PDS and PMS processes were 87.6 ± 4.2 and 80.2± 4.6, respectively. PDS process has higher kinetic constants at all pH values than the PMS process. Both processes were effective in OTC removal from aqueous solution and RSM was efficient in process optimization.

Topics: Ecosystem; Hot Temperature; Oxytetracycline; Peroxides; Sulfates; Water Pollutants, Chemical

Metal-free carbonaceous catalysts have gained growing interest because of their excellence in organic pollutant degradation. However, most of them suffer from deactivation after use, and the origins have not been investigated or understood. In this study, the changes in the characteristics after multiple uses of a carbonaceous catalyst, i.e., oxygen-doped graphitic carbon nitride (O-gCN), were investigated to identify the key factors affecting its reactivity. The O-gCN was repeatedly used to remove an antibiotic (oxytetracycline, OTC) in the presence of peroxymonosulfate (PMS). OTC removal was significantly reduced as the O-gCN was repeatedly used. The reactivity of O-gCN used five times (O-gCN5) corresponded well with the decreased signals of DMPO-X, DMPO-O

Topics: Anti-Bacterial Agents; Environmental Pollutants; Graphite; Nitrogen Compounds; Oxygen; Oxytetracycline; Peroxides