nitrogen-dioxide and copper-phthalocyanine

A new and original gas sensor-system dedicated to the selective monitoring of nitrogen dioxide in air and in the presence of ozone, has been successfully achieved. Because of its high sensitivity and its partial selectivity towards oxidizing pollutants (nitrogen dioxide and ozone), copper phthalocyanine-based chemoresistors are relevant. The selectivity towards nitrogen dioxide results from the implementation of a high efficient and selective ozone filter upstream the sensing device. Thus, a powdered indigo/nanocarbons hybrid material has been developed and investigated for such an application. If nanocarbonaceous material acts as a highly permeable matrix with a high specific surface area, immobilized indigo nanoparticles are involved into an ozonolysis reaction with ozone leading to the selective removal of this analytes from air sample. The filtering yields towards each gas have been experimentally quantified and establish the complete removal of ozone while having the concentration of nitrogen dioxide unchanged. Long-term gas exposures reveal the higher durability of hybrid material as compared to nanocarbons and indigo separately. Synthesis, characterizations by many complementary techniques and tests of hybrid filters are detailed. Results on sensor-system including CuPc-based chemoresistors and indigo/carbon nanotubes hybrid material as in-line filter are illustrated. Sensing performances will be especially discussed.

Topics: Adsorption; Air Pollutants; Indigo Carmine; Indoles; Nanoparticles; Nanotubes, Carbon; Nitrogen Dioxide; Organometallic Compounds; Ozone

Surface plasmon resonance (SPR) has been widely used in a Kretschmann configuration to study optical thickness changes of layers on a Au surface in response to an analyte. The method has been popularized and optimized for protein layers, but has also been used in the same format for other layers without further optimization including those absorbing at the incident wavelength. In this paper, we examine whether SPR remains the "best"attenuated reflectivity format for absorbing overlayers. Experimental data from the SPR response of a copper phthalocyanine film to nitrogen dioxide are used as an input example for a design process using an evolutionary algorithm. The data showed a trend toward thinner gold layer systems ( approximately 25 nm gave an contrast-enhancement of 42.9% compared with approximately 50-nm Au) or Au-free solutions including a layer with low refractive index. From the evolutionary design predictions, further modification could be tested based on available materials and "redundant layers" could be eliminated from the final selection. By inclusion of the external optics, a design could be selected to accommodate poor precision (+/-0.5 degrees ) in the incident angle and a possible multilayer solution was shown using Teflon AF 1600, with refractive index approximately 1.3. The predicted NO(2) response showed an improvement compared with the classical SPR configuration, and the incident angle chosen by the SGA for the interrogation of these layers was close to a stationary point in the absolute response curve, thus offering very good tolerance to automatic position referencing to the reflectivity minimum.

Topics: Equipment Design; Gold; Indoles; Membranes, Artificial; Models, Chemical; Nitrogen Dioxide; Optics and Photonics; Organometallic Compounds; Sensitivity and Specificity; Surface Plasmon Resonance; Surface Properties