nitinol and titanium-dioxide

Direct alteration of material structure/function through strain is a growing area of research that has allowed for novel properties of materials to emerge. Tuning material structure can be achieved by controlling an external force imposed on materials and inducing stress-strain responses (i.e., applying dynamic strain). Electroactive thin films are typically deposited on shape or volume tunable elastic substrates, where mechanical loading (i.e., compression or tension) can affect film structure and function through imposed strain. Here, we summarize methods for straining n-type doped titanium dioxide (TiO2) films prepared by a thermal treatment of a pseudo-elastic nickel-titanium alloy (Nitinol). The main purpose of the described methods is to study how strain affects electrocatalytic activities of metal oxide, specifically hydrogen evolution and oxygen evolution reactions. The same system can be adapted to study the effect of strain more broadly. Strain engineering can be applied for optimization of a material function, as well as for design of adjustable, multifunctional (photo)electrocatalytic materials under external stress control.

Topics: Alloys; Elasticity; Electric Impedance; Electrochemistry; Electrodes; Materials Testing; Nickel; Oxidation-Reduction; Oxides; Stress, Mechanical; Surface Properties; Tensile Strength; Titanium

Biofilm formation has been implicated as a cause of post-tympanostomy tube otorrhea in patients suffering from otitis media with effusion, and biofilms have been found to adhere to all available types of tympanostomy tubes (TT) made from silicone. In this study, we present a novel stent designed with a reduced surface area and a titanium dioxide (TiO

Topics: Alloys; Bacterial Adhesion; Biofilms; Carbenicillin; Coated Materials, Biocompatible; Drug Resistance, Bacterial; Equipment Design; Humans; Middle Ear Ventilation; Pseudomonas aeruginosa; Silicones; Stents; Titanium

NiTi alloys exhibit good properties, such as shape memory behavior, high corrosion resistant, having the closest elasticity modulus of a human bone and superior biocompatibility properties. However, the surface problems that arise during the use of this alloy limit the usage in the industry and health sector. In recent years, micro-arc oxidation method is used to improve the surface properties and increase the usage of these alloys. In this study, the TiO

Topics: Alloys; Biomimetic Materials; Corrosion; Oxidation-Reduction; Sodium Chloride; Titanium

Ti oxides formed naturally on Nitinol surfaces are only a few nanometers thick. To increase their thickness, heat treatments are explored. The resulting surfaces exhibit poor resistance to pitting corrosion. As an alternative approach to accelerate surface oxidation and grow thicker oxides, the exposure of Nitinol to strong oxidizing H(2)O(2) aqueous solutions (3 and 30%) for various periods of time was used. Using X-Ray Photoelectron Spectroscopy (XPS) and Auger spectroscopy, it was found that the surface layers with variable Ti (6-15 at %) and Ni (5-13 at %) contents and the thickness up to 100 nm without Ni-enriched interfaces could be formed. The response of the surface oxides to stress in superelastic regime of deformations depended on oxide thickness. In the corrosion studies performed in both strained and strain-free states using potentiodynamic and potentiostatic polarizations, the surfaces treated in H(2)O(2) showed no pitting in corrosive solution that was assigned to higher chemical homogeneity of the surfaces free of secondary phases and inclusions that assist better biocompatibility of Nitinol medical devices.

Topics: Alloys; Corrosion; Hydrogen Peroxide; Materials Testing; Photoelectron Spectroscopy; Titanium

XPS measurements of coarse-grained and nanostructured nitinol (Ni(50.2)Ti(49.8)) before and after chemical treatment in hydrofluoric acid (40% HF, 1 min) are presented. The nanostructured state, providing the excellent mechanical properties of nitinol, is achieved by severe plastic deformation. The near-surface layers of nitinol were studied by XPS depth profiling. According to the obtained results, a chemical treatment in hydrofluoric acid reduces the thickness of the protective TiO(2) oxide layer and induces a nickel release from the nitinol surface and an arsenic contamination, and can therefore not be recommended as conditioning to increase the roughness of NiTi-implants. A detailed evaluation of the resulting toxicological risks is given.

Topics: Alloys; Arsenic; Hydrofluoric Acid; Nanostructures; Titanium

The stability of Ni in titanium oxide surface layers on nitinol wires known to release certain amounts of Ni was investigated by first principles density functional theory and transmission electron microscopy. The oxides were identified as a combination of TiO and TiO(2) depending on the thickness of the layer. The calculations indicate that free Ni atoms can exist in TiO at ambient temperature while Ni particles form in TiO(2), which was confirmed by the transmission electron microscopy observations. The results are discussed with respect to surface stability and Ni release due to free Ni atoms and Ni particles.

Topics: Alloys; Microscopy, Electron, Transmission; Models, Chemical; Nickel; Oxides; Surface Properties; Titanium

Ion implantation into nitinol had been shown previously to decrease the surface nickel concentration of this alloy and produce a titanium oxide layer. Nothing is known yet about the blood compatibility of this surface and the suitability for implants in the blood vessels, like vascular stents. Nickel depletion of superelastic nitinol was obtained by oxygen or helium plasma-immersion ion implantation. The latter leads to the formation of a nickel-poor titanium-oxide surface with a nanoporous structure, which was used for comparison. Fibrinogen adsorption and conformation changes, blood platelet adhesion, and contact activation of the blood clotting cascade have been checked as in vitro parameters of blood compatibility; metabolic activity and release of cytokines IL-6 and IL-8 from cultured endothelial cells on these surfaces give information about the reaction of the blood vessel wall. The oxygen-ion-implanted nitinol surface adsorbed less fibrinogen on its surface and activated the contact system less than the untreated nitinol surface, but conformation changes of fibrinogen were higher on the oxygen-implanted nitinol. No difference between initial and oxygen-implanted nitinol was found for the platelet adherence, endothelial cell activity, or cytokine release. The nanoporous, helium-implanted nitinol behaved worse than the initial one in most aspects. Oxygen-ion implantation is seen as a useful method to decrease the nickel concentration in the surface of nitinol for cardiovascular applications.

Topics: Alloys; Biocompatible Materials; Blood Cells; Blood Coagulation; Cells, Cultured; Cytokines; Endothelial Cells; Fibrinogen; Humans; Ions; Nickel; Platelet Adhesiveness; Prostheses and Implants; Titanium

The surface conditions of Nitinol wires and tubing were evaluated with the use of X-ray photoelectron spectroscopy, high-resolution Auger spectroscopy, electron backscattering, and scanning-electron microscopy. Samples were studied in the as-received state as well as after chemical etching, aging in boiling water, and heat treatment, and compared to a mechanically polished 600-grit-finish Nitinol surface treated similarly. General regularities in surface behavior induced by the examined surface treatments are similar for wires, tubing, and studied as-cast alloy, though certain differences in surface Ni concentration were observed. Nitinol wires and tubing from various suppliers demonstrated great variability in Ni surface concentration (0.5-15 at.%) and Ti/Ni ratio (0.4-35). The wires in the as-received state, with the exception of those with a black oxide originating in the processing procedure, revealed nickel and titanium on the surface in both elemental and oxidized states, indicating a nonpassive surface. Shape-setting heat treatment at 500 degrees C for 15 min resulted in tremendous increase in the surface Ni concentration and complete Ni oxidation. Preliminary chemical etching and boiling in water successfully prevented surface enrichment in Ni, initially resulting from heat treatment. A stoichiometric uniformly amorphous TiO(2) oxide generated during chemical etching and aging in boiling water was reconstructed at 700 degrees C, revealing rutile structure.

Topics: Alloys; Elements; Hot Temperature; Materials Testing; Nickel; Surface Properties; Titanium

This study investigated a passivation process for polished nitinol wires and vascular stent components, after being given a typical shape setting heat treatment. Heat treated samples were passivated in a nitric acid solution and a series of corrosion tests, surface analysis and chemical analysis was performed. Potentiodynamic polarization tests demonstrated a significant increase in breakdown potential for passivated samples, compared to heat treated surfaces. Surface analysis indicated that the passivation reduces Ni and NiO content in the oxide and increases TiO2 content. Chemical analysis of passivation solutions suggests that the improvement in corrosion resistance is proportional to the quantity of nickel removed. Long term immersion tests demonstrate that nickel release from the surface of the material decreases with time and the quantity of nickel released is lower for passivated samples. The improved corrosion resistance is maintained after extended periods of immersion in saline solution.

Topics: Alloys; Animals; Blood Vessels; Hot Temperature; Humans; Materials Testing; Nickel; Oxygen; Prostheses and Implants; Sodium Chloride; Stents; Titanium