nickel has been researched along with vendex in 250 studies
| Timeframe | Studies, this research(%) | All Research% |
|---|---|---|
| pre-1990 | 0 (0.00) | 18.7374 |
| 1990's | 18 (7.20) | 18.2507 |
| 2000's | 108 (43.20) | 29.6817 |
| 2010's | 113 (45.20) | 24.3611 |
| 2020's | 11 (4.40) | 2.80 |
| Authors | Studies |
|---|---|
| Berástegui-Jimeno, E; Brau-Aguadé, E; Canalda-Sahli, C | 2 |
| Carnes, DL; Clement, DJ; Pruett, JP | 1 |
| Burgess, JO; Clement, DJ; del Rio, CE; Marsicovetere, ES | 1 |
| Bourauel, C; Broome, D; Drescher, D; Ebling, J; Kanarachos, A | 1 |
| Hicks, ML; Silvaggio, J | 1 |
| Kobayashi, C; Suda, H; Yoshioka, T | 1 |
| Campbell, D; Friedman, S; Kaufman, A; Keila, S; Nguyen, HQ | 1 |
| Hoppe, W; Schäfer, E; Tepel, J | 1 |
| Himel, VT; Wolcott, J | 1 |
| Meling, TR; Odegaard, J | 3 |
| Brau-Aguadé, E; Canalda-Sahli, C; Sentís-Vilalta, J | 1 |
| Allemann, C; Haïkel, Y; Serfaty, R; Speisser, JM; Wilson, P | 1 |
| Blum, JY; Cohen, A; Machtou, P; Micallef, JP | 1 |
| Corbett, MC | 1 |
| Kesling, CK | 1 |
| Glickman, GN; Koch, KA | 1 |
| Ceschinski, H; Henkes, H; Kühne, D; Monstadt, H; Weber, W; Weinert, HC | 1 |
| Kazemi, RB; Spångberg, LS; Stenman, E | 1 |
| Messer, HH; Palamara, JE; Sattapan, B | 1 |
| Chagneau, F; Turpin, YL; Vulcain, JM | 1 |
| Gambarini, G | 3 |
| Baratto-Filho, F; Barbizam, JV; Fariniuk, LF; Guerisoli, DM; Pécora, JD; Sousa-Neto, MD | 1 |
| Disegi, JA; Eschbach, L | 1 |
| Bou Dagher, FE; Machtou, P; Yared, GM | 2 |
| Chu, MP; Lai, Y; Vijayaraghavan, TV | 1 |
| Gerhardt, T; Heidemann, D; Leitzbach, C; Lüder, W; Szep, S | 1 |
| Zimet, PO | 1 |
| Gurgel, Jde A; Kerr, S; Pinzan, A; Powers, JM | 1 |
| Schäfer, E; Zapke, K | 1 |
| Bergmans, L; Lambrechts, P; Van Cleynenbreugel, J; Wevers, M | 1 |
| Sleiman, P; Yared, G | 1 |
| Powers, JM; Svec, TA | 1 |
| Dagher, FE; Kulkarni, GK; Machtou, P; Yared, GM | 1 |
| Ruddle, CJ | 3 |
| Barbakow, F; Peters, OA | 1 |
| Kulkarni, GK; Yared, GM | 1 |
| Kusy, RP; Thorstenson, GA | 1 |
| Yared, GM | 1 |
| Barbakow, F; Bucher, W; Kappeler, S; Peters, OA | 1 |
| Camp, JH | 1 |
| Buchanan, LS | 2 |
| Berutti, E; Chiandussi, G; Gaviglio, I; Ibba, A | 1 |
| Booth, JR; Eleazer, PD; Lemons, JE; Scheetz, JP | 1 |
| Barbakow, F; Peters, CI; Peters, OA; Schönenberger, K | 1 |
| Ahn, S; Bahillo, JG; Magán, F; Martín, B; Rodríguez, C; Varela, P; Zelada, G | 1 |
| Himel, VT; Levitan, ME | 1 |
| Gressmann, G; Hülsmann, M; Schäfers, F | 1 |
| Hartwell, GR; Suffridge, CB; Walker, TL | 1 |
| Bou Dagher, F; Kulkarni, K; Yared, G | 1 |
| Blum, JY; Machtou, P; Micallef, JP; Ruddle, C | 1 |
| Nervo, GJ | 1 |
| Kulkarni, GK; Yared, G | 4 |
| Baratto-Filho, F; da Cruz-Filho, AM; de Sousa-Neto, MD; Fariniuk, LF | 1 |
| Arens, FC; Dietz, GC; Hoen, MM; Steiman, HR | 1 |
| Barbakow, F; Hübscher, W; Peters, OA | 1 |
| Messer, HH; O'Hoy, PY; Palamara, JE | 1 |
| Ghossayn, F; Kulkarni, GK; Yared, G | 2 |
| Barbakow, F | 1 |
| Berutti, E; Lendini, M; Negro, AR; Pasqualini, D | 1 |
| Yared, G | 1 |
| Best, S; Kulkarni, GG; Pilliar, R; Watson, P; Yared, G | 1 |
| Sander, C; Sander, FG; Wichelhaus, A | 1 |
| Close, JM; Kapur Wadhwa, R; Kwon, HK | 1 |
| McSpadden, J; Mounce, R | 1 |
| Webber, J | 1 |
| Calas, P; Diemer, F | 1 |
| Gordon, I; Messer, HH; Parashos, P | 1 |
| Helm, D; Hohoff, A; Stamm, T; Sütfeld, J; Wiechmann, D | 1 |
| Hülsmann, M; Musch, U; Paqué, F | 1 |
| da Silva, FM; Kobayashi, C; Suda, H | 1 |
| Fishelberg, G; Pawluk, JW | 1 |
| Peters, OA; Schrader, C | 1 |
| Peters, OA; Ullmann, CJ | 1 |
| Eleazer, PD; Guilford, WL; Lemons, JE | 1 |
| Geserick, M; Hibst, R; Sander, FG; Wichelhaus, A | 1 |
| Dammaschke, T; Erler, M; Schäfer, E | 1 |
| Cacciafesta, V; Fortini, A; Lupoli, M | 1 |
| Del Fabbro, M; Machtou, P; Necchi, S; Rosano, G; Taschieri, S; Weinstein, R | 1 |
| Bian, Z; Cheung, GS; Peng, B; Shen, Y | 1 |
| Buchanan, LS; Mannocci, F; Peru, C; Peru, M; Pitt Ford, TR; Sherriff, M | 1 |
| Doi, H; Ebihara, A; Hayashi, Y; Miyai, K; Suda, H; Yoneyama, T | 1 |
| Eng, D; Eng, M; Xu, X; Zheng, Y | 1 |
| Bekish, D; Bussa, HI; Dosch, R; Duke, J; English, JD; Powers, J; Salas, AM | 1 |
| Bahia, MG; Buono, VT; Melo, MC | 2 |
| Roane, JB | 1 |
| Eliades, T; Pandis, N; Strigou, S | 1 |
| Bürklein, S; Schäfer, E | 1 |
| Di Fiore, PM | 1 |
| Huang, X; Jiang, J; Ling, J; Liu, L; Wei, X | 1 |
| Mounce, R | 1 |
| Giancotti, A; Greco, M | 1 |
| Baumann, MA; Peters, OA; Roehlike, JO | 1 |
| Senia, ES; Wildey, WL | 1 |
| Al-Shalan, T; Ferrari, M; Grandini, S; Ounsi, HF; Pashley, DH; Salameh, Z; Tay, FR | 1 |
| Antônio da Cunha Ponciano Gomes, J; Ormiga Galvão Barbosa, F; Pimenta de Araújo, MC | 1 |
| Anderson, ME; Parashos, P; Price, JW | 1 |
| Cheung, GS; Darvell, BW | 1 |
| Baumgartner, JC; Bui, TB; Mitchell, JC | 1 |
| Bahia, MG; Buono, VT; Fonseca, AM; Melo, MC; Pereira, ES; Viana, AC | 1 |
| Cheung, GS; Kang, SI; Kim, BM; Kim, HC; Lee, CJ; Park, JK | 1 |
| Choo, H; Chung, KR; Kim, SH; Kook, YA | 1 |
| Johnson, E; Kuttler, S; Lloyd, A; Namerow, K | 1 |
| Himuro, T; Miyake, H; Ryu, T | 1 |
| Herbison, P; Lim, Y; Quick, A; Swain, M | 1 |
| Bourauel, C; Eliades, T; Pandis, N; Partowi, S | 1 |
| Barbosa, FO; de Araújo, MC; Gomes, JA | 1 |
| Boessler, C; Paque, F; Peters, OA | 1 |
| Roberts, WE; Sander, C; Sander, FG; Sander, FM | 1 |
| Diop, A; Machtou, P; Maurel, N; Oiknine, M; Patoor, E | 1 |
| Bahia, MG; Buono, VT; Nakagawa, RK; Vieira, EP | 1 |
| Bae, KS; Baek, SH; Chang, SW; Choi, GW; Gu, Y; Kum, KY; Lee, W; Lee, Y; Lim, SM; Oh, SR; Son, WJ | 1 |
| Song, XF; Yin, L | 1 |
| Hägg, U; Hibino, K; Ikegami, T; Lee, W; Wong, RW | 1 |
| Archambault, A; Badawi, H; Carey, JP; Heo, G; Major, PW; Major, TW | 1 |
| Barletta, FB; Caldeira, CL; Gavini, G; Pessoa, OF; Vasconcellos, MA | 1 |
| Abtahi, A; Akhlaghi, NM; Kahali, R; Mehrvarzfar, P; Parirokh, M; Tabatabaee, S | 1 |
| Migliavacca, F; Necchi, S; Petrini, L; Taschieri, S | 1 |
| Chhibber, A; Nanda, R; Upadhyay, M; Uribe, F | 1 |
| Herbison, P; Juan, J; Lim, Y; Loke, C; Quick, AN; Swain, M | 1 |
| Bourauel, C; Jäger, A; Keilig, L; Partowi, S; Reimann, S | 1 |
| Bourauel, C; Chatzigianni, A; Eliades, T; Keilig, L; Reimann, S | 1 |
| Bourauel, C; Eliades, T; Makou, M; Pandis, N; Sifakakis, I | 1 |
| Hou, BX; Sun, W | 1 |
| Cheung, GS; Zhang, EW; Zheng, YF | 1 |
| Cheung, GS; Hur, B; Kim, HC; Park, JK; Yum, J | 1 |
| Barbosa, GA; Bernardes, SR; de Mattos, Mda G; de Torres, EM; Ribeiro, RF | 1 |
| Suzuki, B; Suzuki, EY | 1 |
| Hirai, M; Igarashi, Y; Kawai, N; Nakajima, A; Sakaguchi, M; Sameshima, GT; Shimizu, N; Tanaka, E | 1 |
| Abtin, H; Gao, Y; Haapasalo, M; Qian, W; Shen, Y | 1 |
| Chersoni, S; Cirulli, PP; Micele, L; Pirani, C; Prati, C; Ruggeri, O | 1 |
| Anić, I; Borčić, J; Braut, A; Glavičić, S; Miletić, I | 1 |
| Lei, G; Wu, J; Yan, M; Yu, J; Yu, Y; Zhang, G | 1 |
| Bardsley, S; Peters, CI; Peters, OA | 1 |
| Rinchuse, DJ | 1 |
| Arici, N; Arici, S; Oz, AA | 1 |
| Bergeron, BE; King, JB; Mayerchak, MJ; Roberts, HW | 1 |
| Atakan, G; Kasan, Z; Kuden, C; Yilmaz, S; Yoldas, O | 1 |
| Ammon, D; Gao, Y; Gutmann, JL; Maxwell, R; Wilkinson, K | 1 |
| Cheung, GS; Kim, HC; Kim, JW; Kim, JY; Ko, DC; Park, SH | 1 |
| Kuttler, S; West, J | 1 |
| Bouska, J; DeLong, C; Justman, B; Qian, F; Williamson, A | 1 |
| Gluskin, AK; Han, JT; Peters, OA; Weiss, RA | 1 |
| Berzins, DW; Wycoff, RC | 1 |
| Bahia, MG; Braga, LC; Buono, VT; Magalhães, RR; Nakagawa, RK; Puente, CG | 1 |
| Chen, J; Liu, SS; Mittal, N; Stewart, KT; Xia, Z | 1 |
| Berzins, DW; Ninan, E | 1 |
| Hou, B; Kaiwar, A; Liu, R; Shemesh, H; Wesselink, PR; Wu, MK | 1 |
| Benten, S; Bürklein, S; Schäfer, E | 1 |
| Adusumilli, SP; Arora, S; Maheshwari, A; Mummidi, B; Radhika, A; Sudhakar, P; Varma, DP | 1 |
| Basmaci, F; Kiyan, M; Oztan, MD | 1 |
| Bahia, MG; Buono, VT; Pereira, ES; Viana, AC | 1 |
| Bourauel, C; Jäger, A; Johannessen, L; Keilig, L; Reimann, S | 1 |
| Afkhami, F; Erfanian, M; Javidi, M; Lomee, M; Zarei, M | 1 |
| Abu El Sadat, SM; Saber, Sel D | 1 |
| Diemer, F; Mallet, JP; Michetti, J; Piquet, R | 1 |
| Campbell, L; Haapasalo, M; Shen, Y; Wang, Z; Zheng, YF; Zhou, HM | 1 |
| Alves, JL; Bahia, MG; Buono, VT; Nakagawa, RK | 1 |
| Al-Hadlaq, SM | 1 |
| Lawson, RB | 1 |
| O'Leary, L; Suda, H; Terauchi, Y; Yoshioka, T | 1 |
| Aceto, P; Borsellino, C; Cordasco, G; Fabiano, F; Gatto, E; Matarese, G; Nucera, R; Perillo, L | 1 |
| Gu, YC; Ni, LX | 1 |
| Cheung, GS; Ha, JH; Kim, HC; Kim, SK; Oh, SH; Park, SH | 1 |
| Arias, A; Pereira, ES; Peters, OA; Singh, R | 1 |
| de Figueiredo, JA; Kopper, PM; Morgental, RD; Peters, OA; Vier-Pelisser, FV | 1 |
| Ayyildiz, S; Gökçe, S; Görgülü, S; Kamburoglu, K; Ozen, T | 1 |
| Gambarini, G; Gergi, R; Grande, NM; Osta, N; Plotino, G; Testarelli, L | 1 |
| Arslan, H; Demirbuga, S; Karataş, E; Pala, K; Topçuoğlu, HS; Tuncay, Ö | 1 |
| Campbell, L; Haapasalo, M; Shen, Y; Zhou, HM | 1 |
| Ahluwalia, KS; Brantley, WA; Iijima, M; Kohda, N; Mizoguchi, I; Muguruma, T | 1 |
| Arslan, H; Capar, ID; Ertas, ET; Ertas, H; Ok, E | 1 |
| Ernst, A; Marmodoro, A; Staunton, JB | 1 |
| Nandini, S; SaravanaKarthikeyan, B; Vadhana, S; Velmurugan, N | 1 |
| Düzgün, S; Kesim, B; Topçuoğlu, HS; Tuncay, O | 1 |
| Arslan, H; Capar, ID; Ertas, H | 1 |
| Gambarini, G; Giansiracusa Rubini, A; Grande, NM; Plotino, G; Testarelli, L | 1 |
| Bürklein, S; Poschmann, T; Schäfer, E | 1 |
| Germano, F; Giancotti, A; Greco, M; Muzzi, F | 1 |
| Arslan, H; Capar, ID; Doğanay, E; Karataş, E; Ozsu, D | 1 |
| Alves, FR; Lopes, HP; Moreno, JO; Ribeiro, TO | 1 |
| Kansal, R; Rajput, A; Roongta, R; Talwar, S; Verma, M | 1 |
| Cotti, E; Gambarini, G; Grande, NM; Plotino, G; Testarelli, L | 1 |
| Akcay, M; Arslan, H; Capar, ID; Uysal, B | 1 |
| Bürklein, S; Mathey, D; Schäfer, E | 1 |
| Akcay, M; Arslan, H; Capar, ID; Ertas, H | 1 |
| Cheung, GS; Ha, JH; Kim, HC; Kim, JW; Kwak, SW; Versluis, A | 1 |
| Hayashi, Y; Irifune, Y; Tsujimoto, M; Tsujimoto, Y; Watanabe, I; Yamada, S | 1 |
| Alovisi, M; Berutti, E; Chiandussi, G; Pasqualini, D; Pastorelli, MA; Scotti, N | 1 |
| Arreghini, A; Lombardo, L; Mollica, F; Siciliani, G | 1 |
| Boninelli, S; Grande, NM; La Rosa, G; Lo Savio, F; Pedullà, E; Plotino, G; Rapisarda, E | 2 |
| Al-Sudani, D; Di Giorgio, F; Di Giorgio, G; Gambarini, G; Giansiracusa Rubini, A; Piasecki, L; Plotino, G; Sannino, G; Testarelli, L | 1 |
| Berbert, FL; Bonetti-Filho, I; da Frota, MF; Espir, CG; Garcia, LF; Marques, AA; Sponchiado-Junior, EC; Tanomaru-Filho, M | 1 |
| Liu, Y; Liu, ZX; Wang, PL; Ww Chang, J; Yuan, CY; Zhang, CF | 1 |
| Goymen, M; Isman, E; Kurkcu, M; Taner, L | 1 |
| Arslan, H; Çapar, ID | 1 |
| Arias, A; Peters, OA; Singh, R | 1 |
| Arslan, H; Büker, M; Çapar, ID; Karataş, E; Seçkin, F | 1 |
| Bai, Y; Hu, X; Li, C; Peng, C; Wang, L; Wu, H | 1 |
| Chu, TM; Dechow, P; Kang, HK; Kyung, HM; Liu, SS; Stewart, K | 1 |
| Aun, DP; Bahia, MG; Buono, VT; Peixoto, IF; Pereira, ÉS | 1 |
| Baechtold, MS; Baratto-Filho, F; Barbieri, N; Correr, GM; Gabardo, MC; Leonardi, DP; Zielak, JC | 1 |
| Akçay, M; Arslan, H; Capar, ID; Dane, A; Uysal, B | 1 |
| Cha, JY; Choi, SH; Hwang, CJ; Jang, SH | 1 |
| Amorfini, L; Benedicenti, S; Calzolari, C; Dalessandri, D; Drago, S; Gallo, F; Migliorati, M; Silvestrini-Biavati, A | 1 |
| Abu-Tahun, IH; El Abed, R; Ha, JH; Kim, HC; Kwak, SW; Lee, CJ | 1 |
| Carvalho, CA; de Vasconcelos, RA; Govindjee, RG; Govindjee, S; Murphy, S; Peters, OA | 1 |
| Haapasalo, M; Hieawy, A; Huang, X; Maezono, H; Shen, Y; Wang, ZJ | 1 |
| Ahn, SY; Kim, E; Kim, HC | 1 |
| Capar, ID; Ertas, H; Kaval, ME; Sen, BH | 1 |
| Capar, ID; Ertas, H; Kaval, ME | 1 |
| Alfouzan, K; Jamleh, A | 1 |
| Cacchioli, A; Di Blasio, A; Galli, C; Gandolfini, M; Katsaros, C; Maino, BG; Ravanetti, F; Spadoni, D | 1 |
| Wichelhaus, A | 1 |
| Alcalde, MP; Bramante, CM; de Vasconselos, BC; Duarte, MAH; Guerreiro-Tanomaru, JM; Pinto, JC; Só, MVR; Tanomaru-Filho, M; Vivan, RR | 1 |
| Doi, H; Ebihara, A; Hanawa, T; Nishijo, M; Okiji, T; Tokita, D | 1 |
| Barros, SE; Chiqueto, K; Ferreira, E; Janson, G; Rösing, C | 1 |
| Bollero, P; Cordaro, M; Cozza, P; Di Fazio, V; Lione, R; Pavoni, C | 1 |
| Bürklein, S; Schäfer, E; Stüber, JP | 1 |
| De-Deus, G; Ha, JH; Kim, HC; Kwak, SW; Versluis, A | 1 |
| Di Nardo, D; Galli, M; Gambarini, G; Piasecki, L; Seracchiani, M; Testarelli, L; Valenti Obino, F | 1 |
| Albertini, P; Ghislanzoni, LH; Lucchese, A; Manuelli, M | 1 |
| Ebihara, A; Htun, PH; Kimura, S; Maki, K; Nishijo, M; Okiji, T; Tokita, D | 1 |
| D'Angelo, M; Di Nardo, D; Gambarini, G; Morese, A; Seracchiani, M; Testarelli, L | 1 |
| Cantore, M; Di Nardo, D; Gambarini, G; Miccoli, G; Seracchiani, M; Testarelli, L; Zanza, A | 1 |
| Barrett, AA; Jones, CT; Mecholsky, JJ; Nair, UP; Pace, KM | 1 |
| Del Giudice, A; Gambarini, G; Miccoli, G; Seracchiani, M; Testarelli, L; Zanza, A | 1 |
| Cicconetti, A; Di Nardo, D; Galli, M; Gambarini, G; Miccoli, G; Obino, FV; Seracchiani, M; Testarelli, L | 1 |
| Bourauel, C; Jäger, A; Johannessen, L; Nadal, J; Sanders, E | 1 |
| Ha, JH; Haapasalo, M; Kim, HC; Kwak, SW; Shen, Y | 1 |
| Ebihara, A; Htun, PH; Kimura, S; Kyaw, MS; Maki, K; Nakatsukasa, T; Okiji, T; Omori, S; Thu, M | 1 |
| Chen, J; Jiang, F; Liang, J; Lin, B | 1 |
| Chang, SW; Jang, JH; Kim, HJ; Lee, JE; Oh, S; Seo, JY | 1 |
8 review(s) available for nickel and vendex
| Article | Year |
|---|---|
Stainless steel in bone surgery.
Topics: Biomechanical Phenomena; Fracture Fixation, Internal; Humans; Magnetic Resonance Imaging; Materials Testing; Nickel; Prosthesis Design; Stainless Steel; Torque | 2000 |
Mechanical root canal preparation with NiTi rotary instruments: rationale, performance and safety. Status report for the American Journal of Dentistry.
Topics: Dental Alloys; Dental Bonding; Dental Pulp Cavity; Elasticity; Equipment Design; Equipment Failure; Equipment Safety; Humans; Nickel; Root Canal Filling Materials; Root Canal Irrigants; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Therapeutic Irrigation; Titanium; Tooth Crown; Torque; Touch | 2001 |
Nickel-titanium rotary systems: review of existing instruments and geometries.
Topics: Dental Alloys; Dental Pulp Cavity; Dentin; Equipment Design; Equipment Failure; Humans; Nickel; Root Canal Irrigants; Root Canal Preparation; Rotation; Smear Layer; Surface Properties; Terminology as Topic; Time Factors; Titanium; Tooth Apex; Torque | 2000 |
Use of nickel titanium instruments for cleaning and shaping root canal systems.
Topics: Dental Alloys; Dental Instruments; Elasticity; Equipment Design; Humans; Nickel; Root Canal Preparation; Titanium; Torque | 2003 |
Nickel-titanium rotary-file canal preparation and intracanal file separation.
Topics: Dental High-Speed Equipment; Dental Instruments; Equipment Design; Equipment Failure; Humans; Nickel; Root Canal Preparation; Sterilization; Titanium; Torque | 2004 |
[Advantages and limits of nickel-titanium instruments for root canal preparation. A review of the current literature].
Topics: Dental Alloys; Dental Instruments; Dental Stress Analysis; Elasticity; Equipment Failure; Humans; Materials Testing; Nickel; Pliability; Root Canal Irrigants; Root Canal Preparation; Sodium Hypochlorite; Stainless Steel; Sterilization; Titanium; Tooth Apex; Torque | 2005 |
A review of instrumentation kinematics of engine-driven nickel-titanium instruments.
Topics: Biomechanical Phenomena; Dental Instruments; Endodontics; Equipment Design; Equipment Failure; Humans; Metallurgy; Nickel; Stress, Mechanical; Titanium; Torque | 2016 |
Kinematic Effects of Nickel-Titanium Instruments with Reciprocating or Continuous Rotation Motion: A Systematic Review of In Vitro Studies.
Topics: Biomechanical Phenomena; Dental Instruments; Equipment Design; In Vitro Techniques; Materials Testing; Motion; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Titanium; Torque | 2016 |
10 trial(s) available for nickel and vendex
| Article | Year |
|---|---|
Modeling capacity of ENDOflash files in simulated root canals.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Equipment Failure; Humans; Image Processing, Computer-Assisted; Models, Anatomic; Nickel; Root Canal Preparation; Rotation; Stainless Steel; Statistics, Nonparametric; Titanium; Torque | 2001 |
A comparative scanning electron microscopic investigation of the efficacy of manual and automated instrumentation of root canals.
Topics: Automation; Dental Alloys; Dental Pulp; Dental Pulp Cavity; Dentin; Equipment Design; Humans; Microscopy, Electron, Scanning; Nickel; Root Canal Preparation; Rotation; Smear Layer; Statistics, Nonparametric; Titanium; Tooth Apex; Torque | 2000 |
Maxillary incisor torque with conventional and self-ligating brackets: a prospective clinical trial.
Topics: Adolescent; Analysis of Variance; Cephalometry; Dental Alloys; Dental Stress Analysis; Female; Humans; Incisor; Male; Maxilla; Nickel; Orthodontic Brackets; Orthodontics, Corrective; Prospective Studies; Titanium; Tooth Extraction; Torque | 2006 |
The influence of various automated devices on the shaping ability of Mtwo rotary nickel-titanium instruments.
Topics: Chi-Square Distribution; Dental High-Speed Equipment; Humans; Nickel; Root Canal Preparation; Rotation; Titanium; Torque | 2006 |
A comparison of torque expression between stainless steel, titanium molybdenum alloy, and copper nickel titanium wires in metallic self-ligating brackets.
Topics: Alloys; Copper; Dental Alloys; Dental Stress Analysis; Humans; Materials Testing; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Rotation; Stainless Steel; Stress, Mechanical; Surface Properties; Temperature; Titanium; Torque; Torsion, Mechanical; Transducers | 2010 |
Comparison of dentine removal using V-taper and K-Flexofile instruments.
Topics: Adult; Dental Alloys; Dental Pulp Cavity; Dentin; Equipment Design; Humans; Mandible; Materials Testing; Middle Aged; Molar; Nickel; Root Canal Irrigants; Root Canal Preparation; Rotation; Sodium Hypochlorite; Stainless Steel; Surface Properties; Titanium; Tomography, X-Ray Computed; Tooth Apex; Tooth Root; Torque | 2010 |
The clinical and laboratory effects of bracket type during canine distalization with sliding mechanics.
Topics: Adolescent; Cephalometry; Child; Cuspid; Dental Alloys; Dental Implants; Elastic Modulus; Female; Friction; Humans; Male; Mandible; Materials Testing; Maxilla; Molar; Nickel; Orthodontic Anchorage Procedures; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Prospective Studies; Stainless Steel; Titanium; Tooth Movement Techniques; Torque | 2012 |
Comparison of air-driven vs electric torque control motors on canal centering ability by ProTaper NiTi rotary instruments.
Topics: Air; Dental Alloys; Dental Pulp Cavity; Dentin; Electrical Equipment and Supplies; Equipment Design; Humans; Image Processing, Computer-Assisted; Molar; Nickel; Root Canal Preparation; Rotation; Titanium; Tooth Apex; Tooth Root; Torque | 2013 |
Effect of orthodontic brackets and different wires on radiofrequency heating and magnetic field interactions during 3-T MRI.
Topics: Dental Alloys; Elastomers; Hot Temperature; Humans; Isotonic Solutions; Magnetic Fields; Magnetic Resonance Imaging; Materials Testing; Nickel; Orthodontic Brackets; Orthodontic Wires; Radio Waves; Safety; Stainless Steel; Temperature; Thermometers; Titanium; Torque | 2014 |
Immediate versus delayed loading: comparison of primary stability loss after miniscrew placement in orthodontic patients-a single-centre blinded randomized clinical trial.
Topics: Adult; Bone Screws; Dental Stress Analysis; Female; Humans; Male; Nickel; Orthodontic Anchorage Procedures; Single-Blind Method; Time Factors; Titanium; Torque; Weight-Bearing | 2016 |
232 other study(ies) available for nickel and vendex
| Article | Year |
|---|---|
Torsional and bending properties of stainless steel and nickel titanium Canal Master U and Flexogate instruments.
Topics: Dental Instruments; Equipment Design; Materials Testing; Nickel; Pliability; Root Canal Preparation; Stainless Steel; Titanium; Torque | 1996 |
A comparison of bending and torsional properties of K-files manufactured with different metallic alloys.
Topics: Alloys; Dental Alloys; Dental Instruments; Equipment Design; Materials Testing; Nickel; Pliability; Root Canal Preparation; Stainless Steel; Titanium; Torque | 1996 |
Cyclic fatigue testing of nickel-titanium endodontic instruments.
Topics: American Dental Association; Analysis of Variance; Dental Alloys; Dental Instruments; Dental Pulp Cavity; Dental Stress Analysis; Equipment Failure Analysis; Evaluation Studies as Topic; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Root Canal Preparation; Titanium; Torque; United States | 1997 |
Torsional testing of the Lightspeed nickel-titanium instrument system.
Topics: American Dental Association; Dental Alloys; Dental Instruments; Dental Stress Analysis; Equipment Failure Analysis; Materials Testing; Nickel; Root Canal Preparation; Statistics, Nonparametric; Titanium; Torque; United States | 1996 |
Superelastic nickel titanium alloy retraction springs--an experimental investigation of force systems.
Topics: Calibration; Cuspid; Dental Alloys; Elasticity; Humans; Nickel; Orthodontic Appliance Design; Orthodontic Wires; Reproducibility of Results; Stainless Steel; Stress, Mechanical; Surface Properties; Titanium; Tooth Movement Techniques; Torque | 1997 |
Effect of heat sterilization on the torsional properties of rotary nickel-titanium endodontic files.
Topics: Analysis of Variance; Dental Alloys; Equipment Failure Analysis; Hot Temperature; Nickel; Random Allocation; Root Canal Therapy; Rotation; Steam; Sterilization; Titanium; Torque | 1997 |
A new engine-driven canal preparation system with electronic canal measuring capability.
Topics: Dental Alloys; Electronics, Medical; Equipment Design; Evaluation Studies as Topic; Nickel; Odontometry; Root Canal Preparation; Rotation; Titanium; Torque | 1997 |
Apical extent of rotary canal instrumentation with an apex-locating handpiece in vitro.
Topics: Dental Alloys; Dental Cementum; Dental Pulp Cavity; Dentin; Electronics, Medical; Equipment Design; Gutta-Percha; Humans; Nickel; Pulpectomy; Root Canal Filling Materials; Rotation; Surface Properties; Titanium; Tooth Apex; Torque | 1998 |
Properties of endodontic hand instruments used in rotary motion. Part 3. Resistance to bending and fracture.
Topics: Aluminum; Dental Alloys; Dental High-Speed Technique; Dental Instruments; Equipment Failure; Materials Testing; Nickel; Pliability; Root Canal Preparation; Rotation; Stainless Steel; Titanium; Torque | 1997 |
Torsional properties of nickel-titanium versus stainless steel endodontic files.
Topics: Analysis of Variance; Dental Instruments; Equipment Design; Equipment Failure Analysis; Materials Testing; Nickel; Root Canal Preparation; Stainless Steel; Titanium; Torque | 1997 |
The effect of temperature on the elastic responses to longitudinal torsion of rectangular nickel titanium archwires.
Topics: Copper; Dental Alloys; Dental Stress Analysis; Differential Thermal Analysis; Elasticity; Materials Testing; Nickel; Orthodontic Wires; Stress, Mechanical; Temperature; Thermodynamics; Titanium; Torque | 1998 |
The effect of short-term temperature changes on the mechanical properties of rectangular nickel titanium archwires tested in torsion.
Topics: Beverages; Cold Temperature; Copper; Dental Alloys; Dental Stress Analysis; Elasticity; Materials Testing; Nickel; Orthodontic Wires; Temperature; Thermodynamics; Time Factors; Titanium; Torque | 1998 |
Short-term temperature changes influence the force exerted by superelastic nickel-titanium archwires activated in orthodontic bending.
Topics: Dental Alloys; Elasticity; Materials Testing; Nickel; Orthodontic Wires; Temperature; Time Factors; Titanium; Torque | 1998 |
The effect of sterilization on bending and torsional properties of K-files manufactured with different metallic alloys.
Topics: Alloys; Analysis of Variance; Dental Instruments; Hot Temperature; Materials Testing; Metals; Nickel; Pliability; Root Canal Preparation; Stainless Steel; Sterilization; Titanium; Torque | 1998 |
Mechanical properties of nickel-titanium endodontic instruments and the effect of sodium hypochlorite treatment.
Topics: Corrosion; Dental Instruments; Equipment Design; Materials Testing; Nickel; Pliability; Root Canal Preparation; Sodium Hypochlorite; Stainless Steel; Tensile Strength; Titanium; Torque | 1998 |
Analysis of forces developed during mechanical preparation of extracted teeth using Profile NiTi rotary instruments.
Topics: Analysis of Variance; Dental Instruments; Dental Stress Analysis; Humans; Nickel; Root Canal Preparation; Titanium; Torque | 1999 |
Molar rotation and beyond.
Topics: Humans; Malocclusion, Angle Class II; Maxilla; Molar; Nickel; Rotation; Titanium; Tooth Movement Techniques; Torque | 1996 |
Improving incisor torque control with nickel titanium Torque Bars.
Topics: Child; Dental Stress Analysis; Female; Humans; Incisor; Malocclusion, Angle Class II; Nickel; Orthodontic Appliance Design; Orthodontic Appliances; Orthodontic Wires; Orthodontics, Corrective; Titanium; Torque | 1999 |
21st-century endodontics.
Topics: Aluminum Compounds; Calcium Compounds; Dental Alloys; Dental High-Speed Equipment; Drug Combinations; Endoscopy; Equipment Design; Forecasting; Humans; Microscopy; Nickel; Oxides; Reproducibility of Results; Root Canal Filling Materials; Root Canal Irrigants; Root Canal Obturation; Root Canal Therapy; Silicates; Technology, Dental; Titanium; Torque | 2000 |
Torquability of microcatheter guidewires: the resulting torsional moment.
Topics: Algorithms; Alloys; Catheterization, Peripheral; Equipment Design; Humans; Materials Testing; Micromanipulation; Nickel; Platinum; Pliability; Rotation; Stainless Steel; Stress, Mechanical; Surface Properties; Tensile Strength; Titanium; Torque | 2000 |
A comparison of stainless steel and nickel-titanium H-type instruments of identical design: torsional and bending tests.
Topics: Dental Alloys; Dental Instruments; Equipment Design; Equipment Failure Analysis; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Pliability; Root Canal Preparation; Stainless Steel; Surface Properties; Titanium; Torque | 2000 |
Torque during canal instrumentation using rotary nickel-titanium files.
Topics: Analysis of Variance; Dental Alloys; Dental Pulp Cavity; Equipment Design; Equipment Failure; Humans; Materials Testing; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Titanium; Torque | 2000 |
Impact of two theoretical cross-sections on torsional and bending stresses of nickel-titanium root canal instrument models.
Topics: Dental High-Speed Equipment; Dental Stress Analysis; Elasticity; Equipment Design; Models, Theoretical; Nickel; Pliability; Root Canal Preparation; Titanium; Torque | 2000 |
Rationale for the use of low-torque endodontic motors in root canal instrumentation.
Topics: Computer Systems; Dental Alloys; Elasticity; Electronics; Equipment Design; Equipment Failure; Equipment Safety; Humans; Nickel; Pliability; Risk Factors; Root Canal Preparation; Stress, Mechanical; Surface Properties; Tensile Strength; Titanium; Torque | 2000 |
Influence of rotational speed, torque and operator's proficiency on ProFile failures.
Topics: Chi-Square Distribution; Clinical Competence; Dental Alloys; Dental Pulp Cavity; Disinfectants; Equipment Design; Equipment Failure; Humans; Nickel; Root Canal Irrigants; Root Canal Preparation; Rotation; Sodium Hypochlorite; Sterilization; Surface Properties; Titanium; Torque | 2001 |
Uprighting molars with twisted superelastic nickel titanium wires.
Topics: Adolescent; Child; Dental Stress Analysis; Elasticity; Female; Humans; Malocclusion; Molar; Nickel; Orthodontic Wires; Titanium; Tooth Movement Techniques; Torque | 2001 |
Preparation of severely curved simulated root canals using engine-driven rotary and conventional hand instruments.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Equipment Failure; Equipment Safety; Humans; Models, Anatomic; Nickel; Pulpectomy; Root Canal Preparation; Stainless Steel; Surface Properties; Time Factors; Titanium; Torque | 2001 |
The use of ProFile in instrumentation.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Equipment Failure; Humans; Nickel; Pulpectomy; Root Canal Irrigants; Root Canal Preparation; Rotation; Stainless Steel; Stress, Mechanical; Surface Properties; Titanium; Torque | 2000 |
Torsional properties of commercial nickel-titanium wires during activation and deactivation.
Topics: Dental Alloys; Elasticity; Humans; Materials Testing; Nickel; Orthodontic Wires; Rotation; Statistics as Topic; Stress, Mechanical; Surface Properties; Temperature; Titanium; Torque | 2001 |
Failure of ProFile instruments used with high and low torque motors.
Topics: Dental High-Speed Equipment; Dental Instruments; Equipment Failure; Humans; Molar; Nickel; Root Canal Preparation; Titanium; Torque | 2001 |
[Definitions and thermodynamic behavior of metal alloys].
Topics: Alloys; Dental Alloys; Dental Stress Analysis; Differential Thermal Analysis; Elasticity; Nickel; Orthodontic Appliance Design; Pliability; Stainless Steel; Stress, Mechanical; Tensile Strength; Terminology as Topic; Thermodynamics; Titanium; Torque | 2001 |
[Mechanical parameters of wires during tooth movement].
Topics: Dental Stress Analysis; Elasticity; Humans; Nickel; Orthodontic Wires; Pliability; Stainless Steel; Tensile Strength; Titanium; Tooth Movement Techniques; Torque | 2001 |
[Choice of orthodontic wire as a function of new alloys and different techniques].
Topics: Alloys; Dental Alloys; Dental Stress Analysis; Elasticity; Humans; Molybdenum; Nickel; Orthodontic Wires; Pliability; Stainless Steel; Titanium; Tooth Movement Techniques; Torque | 2001 |
Cyclic fatigue of nickel-titanium rotary instruments after clinical use with low- and high-torque endodontic motors.
Topics: Dental High-Speed Technique; Dental Instruments; Dental Stress Analysis; Equipment Failure; Equipment Reuse; Nickel; Root Canal Preparation; Titanium; Torque | 2001 |
Failure of ProFile instruments used with air, high torque control, and low torque control motors.
Topics: Air Pressure; Dental Equipment; Dental Instruments; Equipment Failure; Humans; Molar; Nickel; Root Canal Preparation; Titanium; Torque | 2002 |
The deterioration of rotary nickel-titanium files under controlled conditions.
Topics: Dental Instruments; Equipment Failure; Equipment Reuse; Humans; Molar; Nickel; Root Canal Preparation; Titanium; Torque | 2002 |
Influence of rotational speed, torque and operator proficiency on failure of Greater Taper files.
Topics: Dental Alloys; Dental Pulp Cavity; Endodontics; Equipment Design; Equipment Failure; General Practice, Dental; Humans; Matched-Pair Analysis; Materials Testing; Mechanics; Motor Skills; Nickel; Root Canal Irrigants; Root Canal Preparation; Rotation; Sodium Hypochlorite; Statistics as Topic; Sterilization; Surface Properties; Titanium; Torque | 2002 |
Finishing the apical one third. Endodontic considerations.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Equipment Failure; Equipment Safety; Humans; Lubrication; Nickel; Pressure; Root Canal Irrigants; Root Canal Preparation; Rotation; Stainless Steel; Stress, Mechanical; Surface Properties; Titanium; Tooth Apex; Torque | 2002 |
Dynamic torque and apical forces of ProFile.04 rotary instruments during preparation of curved canals.
Topics: Analysis of Variance; Computer Systems; Dental Alloys; Dental Pulp Cavity; Equipment Design; Equipment Failure; Humans; Materials Testing; Models, Anatomic; Nickel; Plastics; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Titanium; Tooth Apex; Torque; Weight-Bearing | 2002 |
Failure of ProFile Ni-Ti instruments used by an inexperienced operator under access limitations.
Topics: Air; Clinical Competence; Dental Instruments; Dental Pulp Cavity; Electricity; Equipment Failure; Humans; Molar; Nickel; Random Allocation; Root Canal Preparation; Titanium; Torque | 2002 |
Effect of archwire size and material on the resistance to sliding of self-ligating brackets with second-order angulation in the dry state.
Topics: Dental Alloys; Elasticity; Friction; Humans; Linear Models; Microscopy, Electron, Scanning; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Stainless Steel; Stress, Mechanical; Surface Properties; Titanium; Tooth Movement Techniques; Torque | 2002 |
Advantages and disadvantages of new torque-controlled endodontic motors and low-torque NiTi rotary instrumentation.
Topics: Dental Instruments; Dental Stress Analysis; Electricity; Equipment Failure; Equipment Safety; Humans; Nickel; Root Canal Preparation; Titanium; Torque | 2001 |
Behaviour of Hero NiTi instruments used by an experienced operator under access limitations.
Topics: Air; Dental Alloys; Dental Instruments; Dental Stress Analysis; Electricity; Equipment Failure; Equipment Safety; Humans; Molar; Nickel; Root Canal Preparation; Titanium; Torque | 2002 |
Engine-driven preparation of curved root canals: measuring cyclic fatigue and other physical parameters.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Dental Pulp Cavity; Dental Stress Analysis; Electricity; Equipment Failure; Equipment Safety; Humans; Nickel; Pilot Projects; Root Canal Preparation; Software; Titanium; Torque | 2002 |
The efficiency of modern endodontics. Interview by Phillip Bonner.
Topics: Dental Alloys; Efficiency; Equipment Design; Humans; Nickel; Root Canal Filling Materials; Root Canal Obturation; Root Canal Preparation; Root Canal Therapy; Rotation; Sound; Time Factors; Titanium; Torque; Ultrasonics | 2000 |
The predefined endodontic preparation: instrument and technique updates for the greater taper system.
Topics: Dental Alloys; Dental High-Speed Equipment; Dental Pulp Cavity; Equipment Design; Equipment Safety; Humans; Nickel; Pulpectomy; Root Canal Irrigants; Root Canal Obturation; Root Canal Preparation; Rotation; Surface Properties; Titanium; Tooth Apex; Torque | 2001 |
Comparative analysis of torsional and bending stresses in two mathematical models of nickel-titanium rotary instruments: ProTaper versus ProFile.
Topics: Dental Alloys; Dental Instruments; Dental Stress Analysis; Elasticity; Finite Element Analysis; Materials Testing; Models, Theoretical; Nickel; Pliability; Root Canal Preparation; Stress, Mechanical; Titanium; Torque | 2003 |
A comparison of torque required to fracture three different nickel-titanium rotary instruments around curves of the same angle but of different radius when bound at the tip.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Dental Pulp Cavity; Dental Stress Analysis; Equipment Failure; Humans; Materials Testing; Nickel; Root Canal Preparation; Titanium; Torque | 2003 |
ProTaper rotary root canal preparation: assessment of torque and force in relation to canal anatomy.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Dental Pulp Cavity; Dental Stress Analysis; Humans; Maxilla; Molar; Nickel; Regression Analysis; Root Canal Preparation; Statistics, Nonparametric; Stress, Mechanical; Titanium; Torque | 2003 |
Factors influencing the fracture of nickel-titanium rotary instruments.
Topics: Dental Alloys; Dental Instruments; Dental Pulp Cavity; Dental Stress Analysis; Equipment Design; Equipment Failure Analysis; Humans; Logistic Models; Molar; Multivariate Analysis; Nickel; Odontometry; Pliability; Root Canal Preparation; Titanium; Torque | 2003 |
A comparative study of root canal preparation using FlexMaster and HERO 642 rotary Ni-Ti instruments.
Topics: Chelating Agents; Dental Alloys; Dental Pulp Cavity; Dentin; Disinfectants; Edetic Acid; Equipment Design; Equipment Failure; Equipment Safety; Humans; Microscopy, Electron, Scanning; Nickel; Peroxides; Root Canal Irrigants; Root Canal Preparation; Rotation; Smear Layer; Sodium Hypochlorite; Statistics, Nonparametric; Time Factors; Titanium; Torque; Urea; Waxes | 2003 |
Cleaning efficiency of nickel-titanium GT and .04 rotary files when used in a torque-controlled rotary handpiece.
Topics: Dental Alloys; Dental Instruments; Humans; Nickel; Root Canal Preparation; Titanium; Torque | 2003 |
Influence of torque control motors and the operator's proficiency on ProTaper failures.
Topics: Clinical Competence; Dental Alloys; Dental Pulp Cavity; Disinfectants; Equipment Design; Equipment Failure; Humans; Matched-Pair Analysis; Molar; Nickel; Root Canal Irrigants; Root Canal Preparation; Rotation; Sodium Hypochlorite; Sterilization; Surface Properties; Titanium; Torque | 2003 |
Analysis of mechanical preparations in extracted teeth using ProTaper rotary instruments: value of the safety quotient.
Topics: Dental Alloys; Dental Materials; Dental Pulp Cavity; Equipment Design; Equipment Failure; Equipment Safety; Forecasting; Humans; Materials Testing; Nickel; Root Canal Preparation; Rotation; Stainless Steel; Stress, Mechanical; Time Factors; Titanium; Torque | 2003 |
Is rotary NiTi too e-e-e-easy?
Topics: Dental Alloys; Dental Pulp Cavity; Disinfectants; Elasticity; Equipment Design; Humans; Nickel; Root Canal Irrigants; Root Canal Preparation; Surface Properties; Titanium; Torque | 2002 |
An in vitro study of the torsional properties of new and used rotary nickel-titanium files in plastic blocks.
Topics: Analysis of Variance; Dental Instruments; Dental Stress Analysis; Equipment Failure; Equipment Reuse; Nickel; Regression Analysis; Root Canal Preparation; Rotation; Titanium; Torque | 2003 |
Histologic analysis of the cleaning capacity of mechanical endodontic instruments activated by the ENDOflash system.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Equipment Design; Humans; Molar; Nickel; Random Allocation; Root Canal Preparation; Smear Layer; Stainless Steel; Titanium; Torque | 2003 |
Evaluation of single-use rotary nickel-titanium instruments.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Dental Stress Analysis; Disposable Equipment; Equipment Failure; Humans; Nickel; Pliability; Root Canal Preparation; Titanium; Torque | 2003 |
Root canal preparation with FlexMaster: asessment of torque and force in relation to canal anatomy.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Dental Pulp Cavity; Dental Stress Analysis; Equipment Failure; Humans; Molar; Nickel; Root Canal Preparation; Statistics, Nonparametric; Stress, Mechanical; Titanium; Torque | 2003 |
The effect of cleaning procedures on fracture properties and corrosion of NiTi files.
Topics: Analysis of Variance; Corrosion; Dental Alloys; Disinfectants; Disinfection; Equipment Failure; Humans; Immersion; Materials Testing; Microscopy, Electron, Scanning; Nickel; Pliability; Root Canal Preparation; Sodium Chloride; Sodium Hypochlorite; Surface Properties; Time Factors; Titanium; Torque; Ultrasonics | 2003 |
An in vitro study of the torsional properties of new and used K3 instruments.
Topics: Analysis of Variance; Dental Alloys; Equipment Design; Equipment Failure; Equipment Reuse; Humans; Materials Testing; Nickel; Regression Analysis; Root Canal Preparation; Rotation; Surface Properties; Titanium; Torque | 2003 |
Torsional properties of new and used rotary K3 NiTi files.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Equipment Failure; Equipment Reuse; Nickel; Root Canal Preparation; Rotation; Statistics, Nonparametric; Titanium; Torque | 2003 |
The LightSpeed system.
Topics: Dental Alloys; Dental Pulp Cavity; Disinfection; Equipment Design; Equipment Failure; Humans; Nickel; Odontometry; Root Canal Preparation; Rotation; Surface Properties; Titanium; Tooth Apex; Torque | 2004 |
Influence of manual preflaring and torque on the failure rate of ProTaper rotary instruments.
Topics: Dental Alloys; Dental Instruments; Equipment Failure; Models, Dental; Nickel; Root Canal Preparation; Titanium; Torque | 2004 |
Accuracy of the Nouvag torque control motor for nickel-titanium rotary instruments.
Topics: Analysis of Variance; Dental Alloys; Equipment Design; Humans; Nickel; Root Canal Preparation; Rotation; Signal Processing, Computer-Assisted; Titanium; Torque | 2004 |
In vitro study of the torsional properties of new and used ProFile nickel titanium rotary files.
Topics: Analysis of Variance; Dental Alloys; Equipment Design; Equipment Failure; Humans; Materials Testing; Nickel; Root Canal Preparation; Rotation; Surface Properties; Titanium; Torque | 2004 |
Torsional fatigue and endurance limit of a size 30.06 ProFile rotary instrument.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Dental Stress Analysis; Equipment Failure; Equipment Failure Analysis; Equipment Reuse; Nickel; Root Canal Preparation; Statistics, Nonparametric; Titanium; Torque | 2004 |
Accuracy of the DTC torque control motor for nickel-titanium rotary instruments.
Topics: Dental Alloys; Dental Equipment; Dental Instruments; Dental Stress Analysis; Equipment Design; Equipment Failure; Nickel; Root Canal Preparation; Titanium; Torque | 2004 |
Development and biomechanical investigation of a new compound palatal arch.
Topics: Activator Appliances; Biomechanical Phenomena; Dental Alloys; Dental Arch; Dental Stress Analysis; Humans; Nickel; Orthodontic Appliance Design; Orthodontic Wires; Orthodontics, Corrective; Palatal Expansion Technique; Stainless Steel; Titanium; Tooth Movement Techniques; Torque | 2004 |
Frictional resistances of different bracket-wire combinations.
Topics: Ceramics; Dental Alloys; Dental Stress Analysis; Friction; Materials Testing; Multivariate Analysis; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Stainless Steel; Titanium; Torque | 2004 |
Accuracy of the TCM Endo III torque-control motor for nickel-titanium rotary instruments.
Topics: Analysis of Variance; Dental High-Speed Equipment; Equipment Design; Materials Testing; Nickel; Root Canal Preparation; Titanium; Torque | 2004 |
Rotary instrumentation: asking the right questions, part 1.
Topics: Dental Alloys; Elasticity; Equipment Design; Humans; Nickel; Root Canal Preparation; Rotation; Stainless Steel; Stress, Mechanical; Surface Properties; Titanium; Torque | 2004 |
ProTaper for hand use.
Topics: Dental Alloys; Dental Instruments; Equipment Failure; Humans; Nickel; Odontometry; Pliability; Root Canal Preparation; Titanium; Torque | 2004 |
Effect of pitch length on the behavior of rotary triple helix root canal instruments.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Dental Stress Analysis; Equipment Design; Humans; Nickel; Root Canal Preparation; Statistics, Nonparametric; Titanium; Torque | 2004 |
Factors influencing defects of rotary nickel-titanium endodontic instruments after clinical use.
Topics: Clinical Competence; Dental Alloys; Dental Instruments; Dental Stress Analysis; Equipment Design; Equipment Failure; Equipment Reuse; Logistic Models; Nickel; Root Canal Preparation; Titanium; Torque | 2004 |
Accuracy of third-order bends of nickel-titanium wires and the effect of high and low pressure during memorizing heat treatment.
Topics: Dental Alloys; Dental Stress Analysis; Elasticity; Hot Temperature; Materials Testing; Metallurgy; Nickel; Orthodontic Appliance Design; Orthodontic Wires; Pliability; Pressure; Random Allocation; Reproducibility of Results; Statistics, Nonparametric; Titanium; Torque | 2004 |
Comparison of root canal preparation using RaCe and ProTaper rotary Ni-Ti instruments.
Topics: Dental Alloys; Dental Instruments; Equipment Failure; Humans; Molar; Nickel; Root Canal Preparation; Smear Layer; Stainless Steel; Titanium; Torque | 2005 |
Analysis of forces developed during mechanical preparation of extracted teeth using RaCe rotary instruments and ProFiles.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Dental Stress Analysis; Humans; Incisor; Nickel; Root Canal Preparation; Stainless Steel; Titanium; Torque | 2005 |
Analysis of torque and force with differently tapered rotary endodontic instruments in vitro.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Dental Pulp Cavity; Dental Stress Analysis; Elasticity; Equipment Design; Equipment Failure; Nickel; Pliability; Root Canal Preparation; Statistics, Nonparametric; Stress, Mechanical; Titanium; Torque | 2005 |
Effect of cyclic fatigue on static fracture loads in ProTaper nickel-titanium rotary instruments.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Dental Stress Analysis; Equipment Design; Equipment Failure; Nickel; Root Canal Preparation; Titanium; Torque | 2005 |
A comparison of torque required to fracture rotary files with tips bound in simulated curved canal.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Dental Pulp Cavity; Dental Stress Analysis; Equipment Failure; Humans; Models, Dental; Nickel; Root Canal Preparation; Statistics, Nonparametric; Titanium; Torque | 2005 |
The effect of surface treatment and clinical use on friction in NiTi orthodontic wires.
Topics: Dental Alloys; Dental Stress Analysis; Elasticity; Friction; Humans; Materials Testing; Nickel; Orthodontic Brackets; Orthodontic Wires; Stainless Steel; Surface Properties; Titanium; Torque | 2005 |
Influence of different types of automated devices on the shaping ability of rotary nickel-titanium FlexMaster instruments.
Topics: Dental Alloys; Dental High-Speed Equipment; Dental Instruments; Dental Pulp Cavity; Equipment Design; Equipment Failure; Humans; Image Processing, Computer-Assisted; Models, Dental; Nickel; Root Canal Preparation; Titanium; Torque | 2005 |
A new low-friction ligation system.
Topics: Child; Dental Alloys; Dental Stress Analysis; Elasticity; Female; Friction; Humans; Malocclusion; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Titanium; Tooth Movement Techniques; Torque | 2005 |
Comparison of defects in ProFile and ProTaper systems after clinical use.
Topics: Dental Alloys; Dental Instruments; Dental Stress Analysis; Equipment Failure; Equipment Reuse; Humans; Nickel; Pliability; Root Canal Preparation; Titanium; Torque | 2006 |
Hand and nickel-titanium root canal instrumentation performed by dental students: a micro-computed tomographic study.
Topics: Dental Alloys; Dental Pulp Cavity; Dentin; Endodontics; Humans; Image Processing, Computer-Assisted; Mandible; Molar; Nickel; Root Canal Irrigants; Root Canal Preparation; Rotation; Sodium Hypochlorite; Students, Dental; Time Factors; Titanium; Tomography, X-Ray Computed; Torque | 2006 |
Influence of phase transformation on the torsional and bending properties of nickel-titanium rotary endodontic instruments.
Topics: Calorimetry, Differential Scanning; Dental Alloys; Equipment Design; Equipment Failure; Hot Temperature; Humans; Materials Testing; Nickel; Phase Transition; Pliability; Root Canal Preparation; Rotation; Stainless Steel; Stress, Mechanical; Surface Properties; Titanium; Torque | 2006 |
Comparative study of torsional and bending properties for six models of nickel-titanium root canal instruments with different cross-sections.
Topics: Dental Alloys; Dental Instruments; Dental Stress Analysis; Elasticity; Equipment Design; Finite Element Analysis; Materials Testing; Models, Theoretical; Nickel; Pliability; Root Canal Preparation; Titanium; Torque | 2006 |
Behavior of superelastic NiTi archwire.
Topics: Dental Alloys; Dental Stress Analysis; Elasticity; Materials Testing; Nickel; Orthodontic Wires; Titanium; Torque; Transition Temperature | 2006 |
Influence of simulated clinical use on the torsional behavior of nickel-titanium rotary endodontic instruments.
Topics: Dental Alloys; Dental Instruments; Dental Stress Analysis; Equipment Design; Equipment Failure; Equipment Reuse; Materials Testing; Nickel; Pliability; Root Canal Preparation; Titanium; Torque | 2006 |
Balanced force and rotary shaping.
Topics: Dental High-Speed Equipment; Dental Materials; Equipment Design; Equipment Failure; Humans; Nickel; Root Canal Preparation; Rotation; Titanium; Torque; Weight-Bearing | 2005 |
A dozen ways to prevent nickel-titanium rotary instrument fracture.
Topics: Clinical Competence; Dental Alloys; Dental Instruments; Dental Pulp Cavity; Dental Stress Analysis; Equipment Design; Equipment Failure; Equipment Reuse; Hardness; Humans; Lubrication; Nickel; Root Canal Preparation; Surface Properties; Titanium; Torque | 2007 |
Modes of failure of ProTaper nickel-titanium rotary instruments after clinical use.
Topics: Dental Alloys; Dental Instruments; Dental Stress Analysis; Equipment Failure Analysis; Humans; Microscopy, Electron, Scanning; Nickel; Pliability; Root Canal Preparation; Surface Properties; Titanium; Torque | 2007 |
Negotiating challenging mid root curvatures: rounding the bend.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Humans; Nickel; Odontometry; Patient Care Planning; Root Canal Irrigants; Root Canal Preparation; Rotation; Titanium; Tooth Apex; Torque | 2007 |
Sliding mechanics in extraction cases with a bidimensional approach.
Topics: Adolescent; Bicuspid; Dental Alloys; Dental Stress Analysis; Humans; Male; Malocclusion, Angle Class I; Mechanics; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Orthodontics, Corrective; Prognathism; Titanium; Tooth Extraction; Torque | 2007 |
Effect of immersion in sodium hypochlorite on torque and fatigue resistance of nickel-titanium instruments.
Topics: Analysis of Variance; Nickel; Root Canal Irrigants; Root Canal Preparation; Sodium Hypochlorite; Stress, Mechanical; Surface Properties; Titanium; Torque | 2007 |
What's new in Ni-Ti rotary instrumentation: part 1.
Topics: Dental Alloys; Dental Instruments; Equipment Design; Equipment Failure; Humans; Nickel; Root Canal Preparation; Titanium; Torque | 2007 |
Effect of clinical use on the cyclic fatigue resistance of ProTaper nickel-titanium rotary instruments.
Topics: Dental Alloys; Dental Instruments; Dental Pulp Cavity; Dental Stress Analysis; Equipment Design; Equipment Failure; Equipment Reuse; Humans; Linear Models; Nickel; Root Canal Preparation; Titanium; Torque | 2007 |
Influence of sodium hypochlorite on mechanical properties of K3 nickel-titanium rotary instruments.
Topics: Corrosion; Dental Alloys; Dental Instruments; Dental Stress Analysis; Equipment Failure; Microscopy, Electron, Scanning; Nickel; Oxidation-Reduction; Pliability; Root Canal Irrigants; Root Canal Preparation; Sodium Hypochlorite; Titanium; Torque | 2007 |
Fracture resistance of electropolished rotary nickel-titanium endodontic instruments.
Topics: Dental Alloys; Dental Polishing; Equipment Design; Equipment Failure; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Pliability; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Titanium; Torque | 2007 |
Low-cycle fatigue of rotary NiTi endodontic instruments in hypochlorite solution.
Topics: Corrosion; Dental Alloys; Disinfectants; Elasticity; Equipment Design; Equipment Failure; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Pliability; Root Canal Preparation; Rotation; Sodium Hypochlorite; Stress, Mechanical; Surface Properties; Titanium; Torque | 2008 |
Effect of electropolishing ProFile nickel-titanium rotary instruments on cyclic fatigue resistance, torsional resistance, and cutting efficiency.
Topics: Dental Alloys; Dental Polishing; Electrochemistry; Equipment Design; Equipment Failure; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Root Canal Preparation; Rotation; Surface Properties; Titanium; Torque; Torsion, Mechanical | 2008 |
Dimensional characterization and mechanical behaviour of K3 rotary instruments.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Dental Stress Analysis; Elasticity; Equipment Design; Equipment Failure; Nickel; Pliability; Root Canal Preparation; Titanium; Torque | 2008 |
The new GT Series X rotary shaping system: objectives and technique principles.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Equipment Safety; Humans; Nickel; Pulpectomy; Root Canal Preparation; Rotation; Surface Properties; Titanium; Torque | 2008 |
Comparison of forces generated during root canal shaping and residual stresses of three nickel-titanium rotary files by using a three-dimensional finite-element analysis.
Topics: Computer Simulation; Dental Alloys; Dental Instruments; Dental Stress Analysis; Elasticity; Equipment Design; Finite Element Analysis; Humans; Imaging, Three-Dimensional; Nickel; Phase Transition; Root Canal Preparation; Titanium; Torque | 2008 |
Anterior torque control using partial-osseointegrated mini-implants: biocreative therapy type II technique.
Topics: Adult; Biomechanical Phenomena; Child; Dental Alloys; Dental Implants; Female; Humans; Male; Malocclusion, Angle Class II; Nickel; Orthodontic Anchorage Procedures; Orthodontic Appliance Design; Orthodontic Wires; Osseointegration; Rotation; Stress, Mechanical; Titanium; Tooth Movement Techniques; Torque | 2008 |
Influence of cyclic torsional loading on the fatigue resistance of K3 instruments.
Topics: Dental Alloys; Equipment Design; Equipment Failure; Humans; Materials Testing; Nickel; Pliability; Root Canal Preparation; Stress, Mechanical; Surface Properties; Titanium; Torque; Torsion, Mechanical | 2008 |
Comparison between a novel nickel-titanium alloy and 508 nitinol on the cyclic fatigue life of ProFile 25/.04 rotary instruments.
Topics: Alloys; Dental Alloys; Dental Instruments; Dental Stress Analysis; Equipment Failure; Materials Testing; Nickel; Root Canal Preparation; Titanium; Torque; Torsion, Mechanical | 2008 |
Effects on the dental arch form using a preadjusted appliance with premolar extraction in Class I crowding.
Topics: Bicuspid; Cephalometry; Dental Alloys; Dental Arch; Humans; Imaging, Three-Dimensional; Malocclusion, Angle Class I; Mandible; Maxilla; Models, Biological; Models, Dental; Nickel; Odontometry; Orthodontic Appliance Design; Orthodontic Appliances; Orthodontic Brackets; Orthodontic Wires; Serial Extraction; Titanium; Tooth Crown; Torque; Young Adult | 2008 |
Temperature effects on the forces, moments and moment to force ratio of nickel-titanium and TMA symmetrical T-loops.
Topics: Alloys; Dental Alloys; Humans; Materials Testing; Nickel; Orthodontic Wires; Rotation; Stress, Mechanical; Surface Properties; Temperature; Titanium; Torque; Transducers | 2008 |
Moments generated during simulated rotational correction with self-ligating and conventional brackets.
Topics: Dental Alloys; Dental Bonding; Humans; Mandible; Materials Testing; Models, Dental; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Rotation; Stress, Mechanical; Surface Properties; Titanium; Tooth Movement Techniques; Torque | 2008 |
Influence of electrochemical polishing on the mechanical properties of K3 nickel-titanium rotary instruments.
Topics: Acetic Acid; Dental Alloys; Dental Polishing; Electrochemical Techniques; Equipment Design; Equipment Failure; Humans; Hydrofluoric Acid; Hydrogen-Ion Concentration; Materials Testing; Microscopy, Electron, Scanning; Nickel; Nitric Acid; Pliability; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Titanium; Torque; Torsion, Mechanical | 2008 |
The effect of electropolishing on torque and force during simulated root canal preparation with ProTaper shaping files.
Topics: Dental Alloys; Dental Instruments; Dental Polishing; Dental Stress Analysis; Equipment Failure; Humans; Nickel; Root Canal Preparation; Surface Properties; Titanium; Torque | 2009 |
Reprogramming the memory of superelastic nickel titanium archwires.
Topics: Adolescent; Biomechanical Phenomena; Cuspid; Dental Alloys; Elastic Modulus; Electrochemical Techniques; Female; Humans; Incisor; Malocclusion; Maxilla; Nickel; Orthodontic Wires; Orthodontics, Corrective; Palatal Expansion Technique; Rotation; Titanium; Tooth Eruption, Ectopic; Tooth Movement Techniques; Tooth, Impacted; Torque | 2009 |
A novel platform for in vitro analysis of torque, forces, and three-dimensional file displacements during root canal preparations: application to ProTaper rotary files.
Topics: Aged, 80 and over; Cadaver; Dental Instruments; Dental Stress Analysis; Humans; Imaging, Three-Dimensional; Motor Skills; Nickel; Root Canal Preparation; Titanium; Torque | 2009 |
Torsional behaviour of rotary NiTi ProTaper Universal instruments after multiple clinical use.
Topics: Dental Alloys; Dental Stress Analysis; Edetic Acid; Equipment Failure; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Peroxides; Root Canal Irrigants; Root Canal Preparation; Rotation; Sodium Hypochlorite; Sterilization; Stress, Mechanical; Surface Properties; Titanium; Torque; Torsion, Mechanical; Urea; Waxes | 2009 |
A comparison of nickel-titanium rotary instruments manufactured using different methods and cross-sectional areas: ability to resist cyclic fatigue.
Topics: Dental Alloys; Equipment Design; Equipment Failure; Humans; Manufactured Materials; Materials Testing; Microscopy, Electron, Scanning; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Titanium; Torque | 2010 |
Stress and damage at the bur-prosthesis interface in dental adjustments of a leucite-reinforced glass ceramic.
Topics: Aluminum Silicates; Ceramics; Dental High-Speed Equipment; Dental Materials; Dental Porcelain; Dental Prosthesis Design; Diamond; Elastic Modulus; Equipment Design; Finite Element Analysis; Forecasting; Hardness; Humans; Materials Testing; Mechanical Phenomena; Microscopy, Electron, Scanning; Nickel; Pressure; Stress, Mechanical; Surface Properties; Torque | 2010 |
The Hybrid Orthodontic Treatment System (HOTS).
Topics: Bicuspid; Biomechanical Phenomena; Bone Screws; Cuspid; Dental Alloys; Female; Humans; Incisor; Malocclusion, Angle Class II; Nickel; Orthodontic Anchorage Procedures; Orthodontic Appliance Design; Orthodontic Appliances; Orthodontic Brackets; Orthodontic Space Closure; Orthodontic Wires; Patient Care Planning; Stainless Steel; Stress, Mechanical; Surface Properties; Time Factors; Titanium; Tooth Extraction; Tooth Movement Techniques; Torque; Treatment Outcome; Young Adult | 2010 |
Cyclic fatigue resistance of rotary nickel-titanium instruments submitted to nitrogen ion implantation.
Topics: Dental Alloys; Electrochemical Techniques; Equipment Failure; Humans; Materials Testing; Metallurgy; Nickel; Nitrogen; Pressure; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Titanium; Torque; Vacuum | 2010 |
A comparative computational analysis of the mechanical behavior of two nickel-titanium rotary endodontic instruments.
Topics: Computer Simulation; Dental Alloys; Dental Pulp Cavity; Elastic Modulus; Equipment Design; Finite Element Analysis; Humans; Mechanical Phenomena; Models, Theoretical; Nickel; Pliability; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Titanium; Torque; Torsion, Mechanical | 2010 |
Long-term stability of Class II correction with the Twin Force Bite Corrector.
Topics: Cephalometry; Child; Dental Alloys; Female; Follow-Up Studies; Humans; Longitudinal Studies; Male; Malocclusion, Angle Class II; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Retrognathia; Stainless Steel; Titanium; Tooth Movement Techniques; Torque; Treatment Outcome | 2010 |
Moments generated by simple V-bends in nickel titanium wires.
Topics: Alloys; Dental Alloys; Dental Stress Analysis; Humans; Materials Testing; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Stress, Mechanical; Surface Properties; Titanium; Torque; Transducers | 2011 |
Experimental analysis of torque characteristics of orthodontic wires.
Topics: Dental Stress Analysis; Humans; Nickel; Orthodontic Wires; Steel; Titanium; Torque | 2010 |
Effect of mini-implant length and diameter on primary stability under loading with two force levels.
Topics: Animals; Biomechanical Phenomena; Cattle; Dental Alloys; Dental Implants; Dental Stress Analysis; Imaging, Three-Dimensional; Lasers; Materials Testing; Nickel; Optical Devices; Orthodontic Anchorage Procedures; Orthodontic Appliance Design; Orthodontic Wires; Rotation; Stress, Mechanical; Titanium; Torque; Transducers | 2011 |
A comparative assessment of the forces and moments generated at the maxillary incisors between conventional and self-ligating brackets using a reverse curve of Spee NiTi archwire.
Topics: Biomechanical Phenomena; Dental Alloys; Humans; Incisor; Materials Testing; Maxilla; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Rotation; Stress, Mechanical; Surface Properties; Titanium; Tooth Movement Techniques; Torque | 2010 |
[Torque resistance of three different types of nickel-titanium rotary instruments].
Topics: Cross-Sectional Studies; Dental Alloys; Equipment Design; Equipment Failure; Materials Testing; Nickel; Root Canal Preparation; Stress, Mechanical; Surface Properties; Titanium; Torque | 2010 |
A numerical method for predicting the bending fatigue life of NiTi and stainless steel root canal instruments.
Topics: Dental Alloys; Dental Instruments; Dental Stress Analysis; Equipment Design; Equipment Failure; Finite Element Analysis; Nickel; Pliability; Root Canal Preparation; Stainless Steel; Titanium; Torque | 2011 |
Torsional strength and toughness of nickel-titanium rotary files.
Topics: Dental Alloys; Elastic Modulus; Equipment Design; Equipment Failure; Hardness; Humans; Materials Testing; Mechanical Phenomena; Microscopy, Electron, Scanning; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Titanium; Torque; Torsion, Mechanical | 2011 |
Correlation between vertical misfits and stresses transmitted to implants from metal frameworks.
Topics: Alloys; Biomechanical Phenomena; Chromium; Cobalt; Dental Abutments; Dental Prosthesis, Implant-Supported; Elasticity; Humans; Mandible; Materials Testing; Metals; Microscopy; Nickel; Pressure; Prosthesis Design; Titanium; Torque | 2011 |
Placement and removal torque values of orthodontic miniscrew implants.
Topics: Adolescent; Adult; Biomechanical Phenomena; Bone Screws; Child; Dental Alloys; Dental Implants; Dental Materials; Equipment Failure; Female; Humans; Male; Mandible; Maxilla; Nickel; Orthodontic Anchorage Procedures; Orthodontic Appliance Design; Orthodontic Wires; Osseointegration; Palate; Radiography, Bitewing; Stress, Mechanical; Time Factors; Titanium; Tooth Movement Techniques; Torque; Young Adult | 2011 |
Measurements of the torque moment in various archwire-bracket-ligation combinations.
Topics: Analysis of Variance; Dental Alloys; Dental Stress Analysis; Elastomers; Materials Testing; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Stainless Steel; Statistics, Nonparametric; Titanium; Torque | 2012 |
Fatigue testing of controlled memory wire nickel-titanium rotary instruments.
Topics: Dental Alloys; Dental Instruments; Dental Stress Analysis; Equipment Design; Equipment Failure; Materials Testing; Nickel; Root Canal Preparation; Stress, Mechanical; Titanium; Torque | 2011 |
Cyclic fatigue testing and metallographic analysis of nickel-titanium rotary instruments.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Dental Pulp Cavity; Dental Stress Analysis; Equipment Design; Equipment Failure; Materials Testing; Metallurgy; Nickel; Root Canal Preparation; Statistics, Nonparametric; Stress, Mechanical; Surface Properties; Titanium; Torque | 2011 |
Vertical force and torque analysis during mechanical preparation of extracted teeth using hand ProTaper instruments.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Humans; Incisor; Materials Testing; Nickel; Odontometry; Root Canal Preparation; Stress, Mechanical; Titanium; Tooth Apex; Tooth Root; Torque | 2011 |
Instrument separation analysis of multi-used ProTaper Universal rotary system during root canal therapy.
Topics: Bicuspid; Dental Alloys; Dental Pulp Cavity; Edetic Acid; Equipment Design; Equipment Failure Analysis; Equipment Reuse; Foreign Bodies; Humans; Microscopy, Electron, Scanning; Molar; Nickel; Radiography, Bitewing; Root Canal Irrigants; Root Canal Preparation; Root Canal Therapy; Rotation; Sodium Hypochlorite; Stress, Mechanical; Surface Properties; Titanium; Tooth Apex; Torque | 2011 |
The effect of three rotational speed settings on torque and apical force with vortex rotary instruments in vitro.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Friction; Humans; Materials Testing; Models, Anatomic; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Time Factors; Titanium; Torque | 2011 |
Modification of the bidimensional system.
Topics: Bicuspid; Cuspid; Dental Alloys; Humans; Incisor; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Space Closure; Orthodontic Wires; Stainless Steel; Surface Properties; Titanium; Tooth Movement Techniques; Torque | 2011 |
The effect of autoclaving on torsional moment of two nickel-titanium endodontic files.
Topics: Dental Alloys; Equipment Design; Equipment Failure; Humans; Materials Testing; Nickel; Root Canal Preparation; Rotation; Sterilization; Stress, Mechanical; Titanium; Torque; Torsion, Mechanical | 2012 |
Dentinal microcrack formation during root canal preparations by different NiTi rotary instruments and the self-adjusting file.
Topics: Dental Alloys; Dental Pulp Cavity; Dentin; Equipment Design; Humans; Materials Testing; Molar; Nickel; Root Canal Irrigants; Root Canal Preparation; Rotation; Sodium Hypochlorite; Surface Properties; Therapeutic Irrigation; Titanium; Torque; Vibration | 2012 |
Evaluation of the impact of raw materials on the fatigue and mechanical properties of ProFile Vortex rotary instruments.
Topics: Dental Alloys; Equipment Design; Equipment Failure; Hardness; Humans; Mechanical Phenomena; Nickel; Pliability; Root Canal Preparation; Rotation; Stainless Steel; Stress, Mechanical; Time Factors; Titanium; Torque; Torsion, Mechanical | 2012 |
Canal preparation: single-file shaping technique.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Equipment Failure; Equipment Safety; Humans; Metallurgy; Nickel; Pliability; Root Canal Preparation; Rotation; Stainless Steel; Surface Properties; Titanium; Torque | 2012 |
Effect from cyclic fatigue of nickel-titanium rotary files on torsional resistance.
Topics: Dental Alloys; Equipment Design; Equipment Failure; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Titanium; Torque; Torsion, Mechanical | 2012 |
Single file system: "the science of simplicity".
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Humans; Imaging, Three-Dimensional; Nickel; Pliability; Root Canal Irrigants; Root Canal Preparation; Titanium; Tooth Apex; Torque; X-Ray Microtomography | 2012 |
Resistance to cyclic fatigue failure of a new endodontic rotary file.
Topics: Dental Alloys; Equipment Design; Equipment Failure; Humans; Materials Testing; Microscopy; Models, Anatomic; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Time Factors; Titanium; Torque | 2012 |
An in vitro assessment of the physical properties of novel Hyflex nickel-titanium rotary instruments.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Dental Stress Analysis; Materials Testing; Nickel; Pliability; Root Canal Preparation; Statistics, Nonparametric; Titanium; Torque | 2012 |
An in vitro comparison of torsional stress properties of three different rotary nickel-titanium files with a similar cross-sectional design.
Topics: Dental Alloys; Dental Stress Analysis; Equipment Design; Equipment Failure; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Titanium; Torque; Torsion, Mechanical | 2012 |
Physical and mechanical properties of twisted or ground nickel-titanium instruments.
Topics: Calorimetry, Differential Scanning; Dental Alloys; Elasticity; Equipment Design; Hardness; Humans; Materials Testing; Mechanical Phenomena; Nickel; Physical Phenomena; Pliability; Root Canal Preparation; Spectrometry, X-Ray Emission; Surface Properties; Titanium; Torque; Torsion, Mechanical; X-Ray Diffraction | 2013 |
Three-dimensional quantification of pretorqued nickel-titanium wires in edgewise and prescription brackets.
Topics: Analysis of Variance; Dental Alloys; Materials Testing; Models, Dental; Nickel; Orthodontic Brackets; Orthodontic Wires; Titanium; Torque | 2013 |
Torsion and bending properties of shape memory and superelastic nickel-titanium rotary instruments.
Topics: Dental Alloys; Elasticity; Equipment Design; Equipment Failure; Humans; Materials Testing; Nickel; Pliability; Root Canal Preparation; Rotation; Surface Properties; Temperature; Titanium; Torque; Torsion, Mechanical | 2013 |
Incidence of apical root cracks and apical dentinal detachments after canal preparation with hand and rotary files at different instrumentation lengths.
Topics: Coloring Agents; Dental Alloys; Dental Pulp Cavity; Dentin; Equipment Design; Humans; Image Processing, Computer-Assisted; Incisor; Mandible; Materials Testing; Methylene Blue; Nickel; Root Canal Preparation; Rotation; Titanium; Tooth Apex; Torque | 2013 |
Shaping ability of different single-file systems in severely curved root canals of extracted teeth.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Equipment Failure; Equipment Safety; Humans; Image Processing, Computer-Assisted; Materials Testing; Nickel; Radiography, Bitewing; Root Canal Preparation; Rotation; Surface Properties; Time Factors; Titanium; Torque | 2013 |
Biomechanical and clinical considerations in correcting skeletal class II malocclusion with Forsus™.
Topics: Adolescent; Biomechanical Phenomena; Cephalometry; Dental Alloys; Female; Humans; Malocclusion, Angle Class II; Mandibular Advancement; Nickel; Orthodontic Appliance Design; Orthodontic Appliances, Functional; Orthodontic Wires; Overbite; Patient Care Planning; Titanium; Tooth Movement Techniques; Torque | 2012 |
Ex vivo evaluation of various instrumentation techniques and irrigants in reducing E. faecalis within root canals.
Topics: Bacterial Load; Dental Alloys; Dental Pulp Cavity; Edetic Acid; Enterococcus faecalis; Equipment Design; Humans; Maleates; Materials Testing; Needles; Nickel; Root Canal Irrigants; Root Canal Preparation; Rotation; Sodium Chloride; Sodium Hypochlorite; Syringes; Therapeutic Irrigation; Titanium; Torque; Vibration | 2013 |
The influence of simulated clinical use on the flexibility of rotary ProTaper Universal, K3 and EndoSequence nickel-titanium instruments.
Topics: Dental Alloys; Equipment Design; Humans; Materials Testing; Nickel; Pliability; Root Canal Preparation; Rotation; Stress, Mechanical; Titanium; Torque; Torsion, Mechanical | 2013 |
First order couples induced by nickel-titanium archwires featuring an electrochemically refined surface during simulated rotation of teeth.
Topics: Dental Materials; Dental Prosthesis Design; Electroplating; Equipment Failure Analysis; Friction; Humans; Materials Testing; Nickel; Orthodontic Brackets; Orthodontic Wires; Rotation; Surface Properties; Titanium; Tooth; Torque | 2013 |
Effect of altering the reciprocation range on the fatigue life and the shaping ability of WaveOne nickel-titanium instruments.
Topics: Cone-Beam Computed Tomography; Dental Alloys; Dental Pulp Cavity; Equipment Design; Equipment Failure; Humans; Image Processing, Computer-Assisted; Materials Testing; Molar; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Time Factors; Titanium; Tooth Apex; Torque | 2013 |
Effect of asymmetry on the behavior of prototype rotary triple helix root canal instruments.
Topics: Dental Alloys; Equipment Design; Equipment Safety; Humans; Materials Testing; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Titanium; Torque | 2013 |
Phase transformation behavior and mechanical properties of thermomechanically treated K3XF nickel-titanium instruments.
Topics: Calorimetry, Differential Scanning; Chemical Phenomena; Dental Alloys; Elasticity; Equipment Design; Hot Temperature; Humans; Materials Testing; Mechanical Phenomena; Microscopy, Electron, Scanning; Nickel; Pliability; Root Canal Preparation; Spectrometry, X-Ray Emission; Temperature; Titanium; Torque; Torsion, Mechanical; X-Ray Diffraction | 2013 |
Flexibility and torsional behaviour of rotary nickel-titanium PathFile, RaCe ISO 10, Scout RaCe and stainless steel K-File hand instruments.
Topics: Dental Alloys; Dental Instruments; Equipment Design; Equipment Failure Analysis; Materials Testing; Nickel; Pliability; Root Canal Preparation; Spectrometry, X-Ray Emission; Stainless Steel; Titanium; Torque | 2014 |
Evaluation of cyclic flexural fatigue resistance of 25/0.04 and 25/0.06 twisted file rotary nickel-titanium endodontic instruments.
Topics: Dental Alloys; Equipment Design; Equipment Failure; Materials Testing; Nickel; Pliability; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Time Factors; Titanium; Torque | 2013 |
Class II correction with the Incognito lingual appliance.
Topics: Adult; Dental Alloys; Elastomers; Humans; Male; Malocclusion, Angle Class II; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Patient Care Planning; Stainless Steel; Time Factors; Titanium; Tooth Movement Techniques; Torque | 2013 |
Comparison of the time required to create secondary fracture of separated file fragments by using ultrasonic vibration under various canal conditions.
Topics: Dental Alloys; Dental Pulp Cavity; Dentin; Elasticity; Equipment Design; Equipment Failure; Foreign Bodies; Humans; Nickel; Pliability; Root Canal Preparation; Time Factors; Titanium; Torque; Torsion, Mechanical; Ultrasonics; Vibration | 2013 |
Influence of bracket-slot design on the forces released by superelastic nickel-titanium alignment wires in different deflection configurations.
Topics: Dental Alloys; Dental Stress Analysis; Elasticity; Elastomers; Humans; Materials Testing; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Rotation; Stress, Mechanical; Surface Properties; Titanium; Tooth Movement Techniques; Torque | 2014 |
[Defects in 2061 discarded ProTaper handfiles after clinical use].
Topics: Dental Alloys; Equipment Failure; Humans; Nickel; Root Canal Preparation; Root Canal Therapy; Titanium; Torque | 2013 |
Effect of torsional loading of nickel-titanium instruments on cyclic fatigue resistance.
Topics: Dental Alloys; Elasticity; Equipment Design; Equipment Failure; Friction; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Porosity; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Time Factors; Titanium; Torque; Torsion, Mechanical | 2013 |
In vitro assessment of torque and force generated by novel ProTaper Next Instruments during simulated canal preparation.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Equipment Failure; Humans; Materials Testing; Models, Anatomic; Movement; Nickel; Plastics; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Titanium; Torque | 2013 |
Cutting efficiency of conventional and martensitic nickel-titanium instruments for coronal flaring.
Topics: Animals; Cattle; Dental Alloys; Dental Stress Analysis; Dentin; Equipment Design; Materials Testing; Nickel; Polymethyl Methacrylate; Root Canal Preparation; Rotation; Surface Properties; Time Factors; Titanium; Torque | 2013 |
Cyclic fatigue resistance of newly manufactured rotary nickel titanium instruments used in different rotational directions.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Equipment Failure; Hot Temperature; Humans; Materials Testing; Metallurgy; Models, Anatomic; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Titanium; Torque | 2013 |
The effects of Mtwo, R-Endo, and D-RaCe retreatment instruments on the incidence of dentinal defects during the removal of root canal filling material.
Topics: Bicuspid; Dental Alloys; Dental Pulp Cavity; Dentin; Epoxy Resins; Equipment Design; Gutta-Percha; Humans; Materials Testing; Nickel; Retreatment; Root Canal Filling Materials; Root Canal Preparation; Titanium; Tooth Apex; Tooth Fractures; Torque | 2014 |
Effect of fatigue on torsional failure of nickel-titanium controlled memory instruments.
Topics: Dental Alloys; Equipment Design; Equipment Failure; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Pliability; Root Canal Preparation; Stress, Mechanical; Surface Properties; Temperature; Titanium; Torque; Torsion, Mechanical; Water | 2014 |
Effects of third-order torque on frictional force of self-ligating brackets.
Topics: Alloys; Dental Alloys; Dental Stress Analysis; Friction; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Stainless Steel; Stress, Mechanical; Surface Properties; Titanium; Torque | 2014 |
Comparative study of different novel nickel-titanium rotary systems for root canal preparation in severely curved root canals.
Topics: Cone-Beam Computed Tomography; Dental Alloys; Dental Pulp Cavity; Dentin; Equipment Design; Humans; Image Processing, Computer-Assisted; Imaging, Three-Dimensional; Materials Testing; Molar; Motion; Nickel; Root Canal Preparation; Rotation; Surface Properties; Titanium; Tooth Apex; Torque | 2014 |
Using density functional theory to describe slowly varying fluctuations at finite temperatures: local magnetic moments in Gd and the 'not so local' moments of Ni.
Topics: Algorithms; Computer Simulation; Gadolinium; Magnetic Fields; Models, Chemical; Nickel; Temperature; Torque | 2014 |
Cyclic fatigue resistance of RaCe and Mtwo rotary files in continuous rotation and reciprocating motion.
Topics: Dental Alloys; Elasticity; Equipment Design; Equipment Failure; Humans; Materials Testing; Microscopy, Electron, Scanning; Motion; Nickel; Random Allocation; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Time Factors; Titanium; Torque | 2014 |
Incidence of apical crack initiation and propagation during the removal of root canal filling material with ProTaper and Mtwo rotary nickel-titanium retreatment instruments and hand files.
Topics: Dental Alloys; Dental Pulp Cavity; Dentin; Epoxy Resins; Equipment Design; Gutta-Percha; Humans; Humidity; Image Processing, Computer-Assisted; Nickel; Radiography; Retreatment; Root Canal Filling Materials; Root Canal Obturation; Root Canal Preparation; Rotation; Temperature; Time Factors; Titanium; Tooth Apex; Tooth, Nonvital; Torque | 2014 |
Comparison of cyclic fatigue resistance of nickel-titanium coronal flaring instruments.
Topics: Dental Alloys; Equipment Design; Equipment Failure; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Time Factors; Titanium; Torque | 2014 |
Cutting efficiency of Reciproc and waveOne reciprocating instruments.
Topics: Dental Alloys; Equipment Design; Humans; Materials Testing; Nickel; Polymethyl Methacrylate; Root Canal Preparation; Surface Properties; Time Factors; Titanium; Torque | 2014 |
Shaping ability of different nickel-titanium systems in simulated S-shaped canals with and without glide path.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Humans; Image Processing, Computer-Assisted; Materials Testing; Nickel; Random Allocation; Root Canal Preparation; Rotation; Surface Properties; Time Factors; Titanium; Torque | 2014 |
A miniscrew-supported intrusion auxiliary for open-bite treatment with Invisalign.
Topics: Adolescent; Bone Screws; Dental Alloys; Female; Humans; Malocclusion, Angle Class II; Mandible; Miniaturization; Molar; Nickel; Open Bite; Orthodontic Anchorage Procedures; Orthodontic Appliance Design; Orthodontic Wires; Palatal Expansion Technique; Rotation; Stainless Steel; Titanium; Tooth Movement Techniques; Torque; Young Adult | 2014 |
Effect of ProTaper Universal, Endoflare, Revo-S, HyFlex coronal flaring instruments, and Gates Glidden drills on crack formation.
Topics: Dental Alloys; Dental Pulp Cavity; Dentin; Equipment Design; Humans; Materials Testing; Molar; Nickel; Root Canal Irrigants; Root Canal Preparation; Rotation; Sodium Hypochlorite; Titanium; Torque | 2014 |
Comparison of the efficacy of nickel-titanium rotary systems with or without the retreatment instruments in the removal of gutta-percha in the apical third.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Gutta-Percha; Humans; Humidity; Nickel; Retreatment; Root Canal Filling Materials; Root Canal Irrigants; Root Canal Preparation; Rotation; Sodium Hypochlorite; Stainless Steel; Surface Properties; Temperature; Time; Titanium; Tooth Apex; Torque; Treatment Outcome; Zinc Oxide-Eugenol Cement | 2014 |
Assessment of dentinal damage during canal preparation using reciprocating and rotary files.
Topics: Dental Alloys; Dental Pulp Cavity; Dentin; Equipment Design; Humans; Materials Testing; Motion; Nickel; Pliability; Random Allocation; Root Canal Preparation; Rotation; Stress, Mechanical; Titanium; Torque | 2014 |
Blue treatment enhances cyclic fatigue resistance of vortex nickel-titanium rotary files.
Topics: Dental Alloys; Equipment Design; Equipment Failure; Humans; Materials Testing; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Titanium; Torque | 2014 |
Effects of ProTaper Universal, ProTaper Next, and HyFlex instruments on crack formation in dentin.
Topics: Dental Alloys; Dental Pulp Cavity; Dentin; Humans; Materials Testing; Nickel; Photography; Root Canal Preparation; Rotation; Titanium; Torque | 2014 |
Shaping ability of ProTaper NEXT and BT-RaCe nickel-titanium instruments in severely curved root canals.
Topics: Dental Alloys; Dental Instruments; Equipment Design; Equipment Failure; Humans; In Vitro Techniques; Nickel; Root Canal Preparation; Rotation; Titanium; Torque | 2015 |
An in vitro comparison of apically extruded debris and instrumentation times with ProTaper Universal, ProTaper Next, Twisted File Adaptive, and HyFlex instruments.
Topics: Adult; Bicuspid; Dental Alloys; Dental Pulp Cavity; Equipment Design; Humans; Materials Testing; Middle Aged; Nickel; Periapical Tissue; Root Canal Irrigants; Root Canal Preparation; Rotation; Smear Layer; Therapeutic Irrigation; Time Factors; Titanium; Tooth Apex; Torque | 2014 |
Safety of the factory preset rotation angle of reciprocating instruments.
Topics: Dental Alloys; Equipment Design; Equipment Failure; Equipment Safety; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Titanium; Torque; Torsion, Mechanical | 2014 |
Comparison of conventional and new-generation nickel-titanium files in regard to their physical properties.
Topics: Calorimetry, Differential Scanning; Chemical Phenomena; Dental Alloys; Dental Stress Analysis; Equipment Design; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Pliability; Root Canal Preparation; Stress, Mechanical; Surface Properties; Temperature; Titanium; Torque | 2014 |
Energy consumption of ProTaper Next X1 after glide path with PathFiles and ProGlider.
Topics: Dental Alloys; Dental Pulp Cavity; Efficiency; Electrical Equipment and Supplies; Electricity; Equipment Design; Humans; Materials Testing; Nickel; Root Canal Preparation; Time Factors; Titanium; Tooth Apex; Torque | 2014 |
Torque expression capacity of 0.018 and 0.022 bracket slots by changing archwire material and cross section.
Topics: Alloys; Dental Alloys; Dental Stress Analysis; Elastic Modulus; Humans; Materials Testing; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Steel; Stress, Mechanical; Surface Properties; Titanium; Torque | 2014 |
Influence of cyclic torsional preloading on cyclic fatigue resistance of nickel - titanium instruments.
Topics: Equipment Design; Equipment Failure; Materials Testing; Microscopy, Electron, Scanning; Nickel; Root Canal Preparation; Stress, Mechanical; Surface Properties; Titanium; Torque; Torsion, Mechanical | 2015 |
Cutting efficiency of nickel-titanium rotary and reciprocating instruments after prolonged use.
Topics: Dental Instruments; Equipment Design; Equipment Failure Analysis; Materials Testing; Nickel; Rotation; Stress, Mechanical; Surface Properties; Time Factors; Titanium; Torque | 2016 |
Comparison of cyclic fatigue and torsional resistance in reciprocating single-file systems and continuous rotary instrumentation systems.
Topics: Dental Alloys; Dental Stress Analysis; Elasticity; Equipment Design; Equipment Failure; Humans; Materials Testing; Nickel; Pliability; Root Canal Preparation; Rotation; Stress, Mechanical; Time Factors; Titanium; Torque; Torsion, Mechanical | 2014 |
Morphological analysis of apical foramen over-instrumented by three rotary NiTi systems.
Topics: Dental Alloys; Dental Pulp Cavity; Dentin; Equipment Design; Humans; Incisor; Maxilla; Microscopy, Electron, Scanning; Nickel; Root Canal Preparation; Rotation; Titanium; Tooth Apex; Torque | 2014 |
Histomorphometric evaluation of the effects of various diode lasers and force levels on orthodontic mini screw stability.
Topics: Animals; Dental Stress Analysis; Fibula; Implants, Experimental; Lasers, Semiconductor; Low-Level Light Therapy; Male; Nickel; Orthodontic Anchorage Procedures; Rabbits; Titanium; Torque | 2015 |
Differences in torsional performance of single- and multiple-instrument rotary systems for glide path preparation.
Topics: Dental Instruments; Dental Pulp Cavity; Equipment Design; Humans; Nickel; Random Allocation; Root Canal Preparation; Titanium; Torque | 2016 |
Effect of movement kinematics on the cyclic fatigue resistance of nickel-titanium instruments.
Topics: Dental Instruments; Equipment Design; Equipment Failure Analysis; Materials Testing; Nickel; Rotation; Stainless Steel; Stress, Mechanical; Titanium; Torque | 2016 |
Shaping ability of ProTaper Universal, WaveOne and ProTaper Next in simulated L-shaped and S-shaped root canals.
Topics: Coloring Agents; Dental Alloys; Dental Pulp Cavity; Equipment Design; Humans; Image Processing, Computer-Assisted; Materials Testing; Models, Anatomic; Nickel; Photography; Random Allocation; Root Canal Preparation; Rotation; Titanium; Tooth Apex; Torque | 2015 |
Laser-treated stainless steel mini-screw implants: 3D surface roughness, bone-implant contact, and fracture resistance analysis.
Topics: Animals; Bone Screws; Bone-Implant Interface; Dental Alloys; Dental Etching; Dogs; Image Processing, Computer-Assisted; Imaging, Three-Dimensional; Lasers, Solid-State; Male; Maxilla; Nickel; Orthodontic Anchorage Procedures; Orthodontic Wires; Random Allocation; Stainless Steel; Stress, Mechanical; Surface Properties; Titanium; Torque; X-Ray Microtomography | 2016 |
Constant Insertion Rate Methodology for Measuring Torque and Apical Force in 3 Nickel-Titanium Instruments with Different Cross-sectional Designs.
Topics: Dental Alloys; Equipment Design; Humans; Nickel; Root Canal Preparation; Titanium; Torque | 2015 |
Torsional and Cyclic Fatigue Resistance of a New Nickel-Titanium Instrument Manufactured by Electrical Discharge Machining.
Topics: Dental Alloys; Equipment Design; Equipment Failure; Humans; Nickel; Root Canal Preparation; Rotation; Titanium; Torque | 2016 |
Influence of cervical preflaring on apical transportation in curved root canals instrumented by reciprocating file systems.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Humans; Image Processing, Computer-Assisted; Nickel; Radiography, Dental, Digital; Root Canal Preparation; Titanium; Tooth Apex; Tooth Cervix; Torque | 2015 |
Effect of Different Torque Settings on Crack Formation in Root Dentin.
Topics: Dental Alloys; Dental Pulp Cavity; Dentin; Equipment Design; Humans; Materials Testing; Nickel; Root Canal Preparation; Root Canal Therapy; Rotation; Titanium; Tooth Fractures; Tooth Root; Torque | 2016 |
Evaluation of the surface characteristics of anodic oxidized miniscrews and their impact on biomechanical stability: An experimental study in beagle dogs.
Topics: Alloys; Animals; Biomechanical Phenomena; Bone Screws; Bone-Implant Interface; Dental Alloys; Dogs; Electrochemical Techniques; Male; Mandible; Materials Testing; Microscopy, Atomic Force; Microscopy, Electron, Scanning; Miniaturization; Nickel; Organ Size; Orthodontic Anchorage Procedures; Orthodontic Appliance Design; Orthodontic Wires; Oxidation-Reduction; Random Allocation; Stress, Mechanical; Surface Properties; Titanium; Torque | 2016 |
Effects of Pitch Length and Heat Treatment on the Mechanical Properties of the Glide Path Preparation Instruments.
Topics: Dental Alloys; Equipment Design; Equipment Failure; Hot Temperature; Materials Testing; Microscopy, Electron, Scanning; Nickel; Pliability; Root Canal Preparation; Rotation; Stainless Steel; Stress, Mechanical; Surface Properties; Titanium; Torque; Torsion, Mechanical | 2016 |
Evidence for Reduced Fatigue Resistance of Contemporary Rotary Instruments Exposed to Body Temperature.
Topics: Analysis of Variance; Body Temperature; Calorimetry, Differential Scanning; Dental Alloys; Equipment Design; Equipment Failure; Humans; Materials Testing; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Temperature; Titanium; Torque; Torsion, Mechanical; Transition Temperature | 2016 |
Fatigue Resistance of a 3-dimensional Conforming Nickel-Titanium Rotary Instrument in Double Curvatures.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Dental Pulp Cavity; Equipment Design; Equipment Failure; Fractures, Stress; Materials Testing; Microscopy, Electron, Scanning; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Time Factors; Titanium; Torque | 2016 |
Comparative evaluation of cyclic fatigue resistance of four different nickel-titanium rotary files with different cross-sectional designs and alloy properties.
Topics: Dental Alloys; Dental Instruments; Equipment Design; Equipment Failure Analysis; Materials Testing; Nickel; Root Canal Preparation; Surface Properties; Titanium; Torque | 2017 |
Evaluation of the Cyclic Fatigue and Torsional Resistance of Novel Nickel-Titanium Rotary Files with Various Alloy Properties.
Topics: Cross-Sectional Studies; Dental Alloys; Equipment Design; Equipment Failure; Materials Testing; Nickel; Root Canal Preparation; Rotation; Stainless Steel; Stress, Mechanical; Titanium; Tooth Fractures; Torque; Torsion, Mechanical | 2016 |
Vertical Load Induced with Twisted File Adaptive System during Canal Shaping.
Topics: Bicuspid; Dental Alloys; Dental Pulp Cavity; Equipment Design; Humans; Materials Testing; Nickel; Root Canal Preparation; Rotation; Titanium; Tooth Apex; Torque | 2016 |
The integration of orthodontic miniscrews under mechanical loading: a pre-clinical study in rabbit.
Topics: Alloys; Animals; Bone Screws; Dental Implants; Male; Nickel; Orthodontic Anchorage Procedures; Osseointegration; Rabbits; Stress, Mechanical; Surface Properties; Tibia; Titanium; Torque | 2017 |
A new elastic slot system and V-wire mechanics.
Topics: Biomechanical Phenomena; Dental Alloys; Dental Stress Analysis; Elasticity; Humans; Materials Testing; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Rotation; Stainless Steel; Stress, Mechanical; Surface Properties; Titanium; Torque | 2017 |
Cyclic fatigue and torsional strength of three different thermally treated reciprocating nickel-titanium instruments.
Topics: Dental Alloys; Dental Instruments; Equipment Design; Equipment Failure Analysis; Hot Temperature; Materials Testing; Microscopy, Electron, Scanning; Nickel; Titanium; Torque; Torsion, Mechanical | 2018 |
Evaluation of selected mechanical properties of NiTi rotary glide path files manufactured from controlled memory wires.
Topics: Dental Instruments; Equipment Design; Equipment Failure; Materials Testing; Nickel; Stress, Mechanical; Titanium; Torque; Torsion, Mechanical | 2018 |
Expanding torque possibilities: A skeletally anchored torqued cantilever for uprighting "kissing molars".
Topics: Brazil; Cephalometry; Child; Dental Implants; Dental Stress Analysis; Female; Humans; Malocclusion, Angle Class II; Mandible; Molar; Nickel; Orthodontic Anchorage Procedures; Orthodontic Appliance Design; Orthodontic Appliances; Orthodontic Brackets; Orthodontic Wires; Patient Care Planning; Radiography, Panoramic; Stress, Mechanical; Titanium; Tooth Crown; Tooth Eruption; Tooth Movement Techniques; Tooth Root; Tooth, Impacted; Torque; Treatment Outcome | 2018 |
Titanium alloy vs. stainless steel miniscrews: an in vivo split-mouth study.
Topics: Adolescent; Adult; Bone Screws; Child; Female; Humans; Male; Nickel; Orthodontic Anchorage Procedures; Osseointegration; Stainless Steel; Titanium; Torque; Young Adult | 2018 |
Real-time dynamic torque values and axial forces during preparation of straight root canals using three different endodontic motors and hand preparation.
Topics: Dental Alloys; Dental Instruments; Dental Stress Analysis; Electrical Equipment and Supplies; Equipment Design; Humans; Incisor; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Titanium; Torque | 2019 |
Safe pseudoelastic limit range under torsional loading with Reciproc Blue.
Topics: Analysis of Variance; Dental Alloys; Dental Instruments; Equipment Design; Equipment Failure; Equipment Failure Analysis; Equipment Safety; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Root Canal Preparation; Rotation; Stress, Mechanical; Surface Properties; Titanium; Torque; Torsion, Mechanical | 2019 |
Measurement of torque generated during intracanal instrumentation in vivo.
Topics: Equipment Design; Germany; Nickel; Root Canal Preparation; Titanium; Torque | 2019 |
Transverse and torque dental changes after passive self-ligating fixed therapy: A two-year follow-up study.
Topics: Adolescent; Adult; Analysis of Variance; Bicuspid; Computer-Aided Design; Dental Arch; Dental Casting Technique; Female; Follow-Up Studies; Humans; Imaging, Three-Dimensional; Male; Malocclusion; Mandible; Maxilla; Models, Dental; Nickel; Orthodontic Appliance Design; Orthodontic Appliances; Palatal Expansion Technique; Software; Titanium; Tooth Crown; Tooth Movement Techniques; Torque; Treatment Outcome; Young Adult | 2019 |
Comparison of torque, force generation and canal shaping ability between manual and nickel-titanium glide path instruments in rotary and optimum glide path motion.
Topics: Dental Alloys; Dental Pulp Cavity; Equipment Design; Molar; Nickel; Root Canal Preparation; Titanium; Torque | 2020 |
Potential of Operative Torque in Evaluating NiTi Instruments.
Topics: Dental Alloys; Nickel; Root Canal Preparation; Titanium; Torque | 2020 |
Effect of Flexural Stress on Torsional Resistance of NiTi Instruments.
Topics: China; Dental Alloys; Dental Instruments; Equipment Design; Equipment Failure; Nickel; Root Canal Preparation; Titanium; Torque; Torsion, Mechanical | 2021 |
Fractographic analysis of separated endodontic file designs.
Topics: Dental Alloys; Endodontics; Equipment Design; Humans; Materials Testing; Microscopy, Electron, Scanning; Nickel; Reproducibility of Results; Rotation; Stress, Mechanical; Surface Properties; Titanium; Torque | 2020 |
Influence of shaft length on torsional behavior of endodontic nickel-titanium instruments.
Topics: Dental Alloys; Dental Instruments; Equipment Design; Equipment Failure; Materials Testing; Nickel; Root Canal Preparation; Stress, Mechanical; Titanium; Torque; Torsion, Mechanical | 2021 |
Operative Torque Analysis to Evaluate Cutting Efficiency of Two Nickel-Titanium Rotary Instruments for Glide Path: An
Topics: Alloys; Dental Alloys; Dental Instruments; Dental Pulp Cavity; Equipment Design; Germany; Nickel; Root Canal Preparation; Titanium; Torque | 2021 |
Comparison of multiforce nickel-titanium wires to multistrand wires without force zones in bending and torque measurements.
Topics: Dental Stress Analysis; Materials Testing; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Stainless Steel; Stress, Mechanical; Titanium; Torque | 2022 |
Effects of Root Canal Curvature and Mechanical Properties of Nickel-Titanium Files on Torque Generation.
Topics: Alloys; Dental Alloys; Dental Pulp Cavity; Equipment Design; Nickel; Root Canal Preparation; Rotation; Titanium; Torque | 2021 |
Effect of kinematics on the torque/force generation, surface characteristics, and shaping ability of a nickel-titanium rotary glide path instrument: An ex vivo study.
Topics: Biomechanical Phenomena; Dental Pulp Cavity; Equipment Design; Nickel; Root Canal Preparation; Titanium; Torque | 2022 |
A Comparison of the Ligation Torque Expression of a Ribbonwise Bracket-Archwire Combination and a Conventional Combination: A Primary Study.
Topics: Humans; Materials Testing; Molybdenum; Nickel; Orthodontic Appliance Design; Orthodontic Brackets; Orthodontic Wires; Stainless Steel; Titanium; Torque | 2022 |
Evaluation of design, mechanical properties, and torque/force generation of heat-treated NiTi glide path instruments.
Topics: Hot Temperature; Humans; Nickel; Titanium; Torque | 2022 |