melitten and 1-palmitoyl-2-oleoylglycero-3-phosphoglycerol

An understanding of the mechanism of action of antimicrobial peptides is fundamental to the development of new and more active antibiotics. In the present work, we use a wide range of techniques (SANS, SAXD, DSC, ITC, CD, and confocal and electron microscopy) in order to fully characterize the interaction of a cecropin A-melittin hybrid antimicrobial peptide, CA(1-7)M(2-9), of known antimicrobial activity, with a bacterial model membrane of POPE/POPG in an effort to unravel its mechanism of action. We found that CA(1-7)M(2-9) disrupts the vesicles, inducing membrane condensation and forming an onionlike structure of multilamellar stacks, held together by the intercalated peptides. SANS and SAXD revealed changes induced by the peptide in the lipid bilayer thickness and the bilayer stiffening in a tightly packed liquid-crystalline lamellar phase. The analysis of the observed abrupt changes in the repeat distance upon the phase transition to the gel state suggests the formation of an L

Topics: Amino Acid Sequence; Antimicrobial Cationic Peptides; Melitten; Phosphatidylethanolamines; Phosphatidylglycerols

To study the interaction between melittin peptides and lipid bilayer, we performed coarse-grained simulations on systems containing melittin interacting with a bilayer containing zwitterionic dipalmitoylphosphatidylcholine (DPPC) and anionic palmitoyloleoylphosphatidylglycerol (POPG) phospholipids in a 7:3 ratio. Eight different systems were considered: four at low and four at high peptide to lipid (P/L) ratios. In case of low P/L ratio we did not observe any pore creation in the bilayer. In two out of four of the simulations with the high P/L ratio, appearance of transient pores in the bilayer was observed. These pores were created due to an assembly of 3-5 melittin peptides. Not all of the peptides in the pores were in a transmembrane conformation; many of them had their termini residues anchored to the same leaflet, and these peptides assumed bent, U-shaped, conformations. We propose that when an assembly of melittin peptides creates pores, such an assembly acts as a "wedge" that splits the bilayer. To get a more detailed description of melittin on the bilayer surface and in transient pores, we performed coarse-grained to united-atom scale transformations and after that performed 50 ns molecular dynamics simulations using the united atom description of the systems. While these simulations did not show much of the change in the pore structure during the 50 ns time interval, they clearly showed the presence of water in the transient pores. The appearance of transient pores together with the translocation of peptides across the membranes is consistent with the mechanism proposed to explain graded dye leakage from large vesicles in the presence of melittin.

Topics: 1,2-Dipalmitoylphosphatidylcholine; Lipid Bilayers; Melitten; Molecular Dynamics Simulation; Phosphates; Phosphatidylglycerols; Pressure; Temperature

Melittin is a 26-residue bee venom peptide that folds into amphipathic α-helix and causes membrane permeabilization via a mechanism that is still disputed. While an equilibrium transmembrane pore model has been a central part of the mechanistic dialogue for decades, there is growing evidence that a transmembrane pore is not required for melittin's activity. In part, the controversy is due to limited experimental tools to probe the bilayer's response to melittin. Electrochemical impedance spectroscopy (EIS) is a technique that can reveal details of molecular mechanism of peptide activity, as it yields direct, real-time measurements of membrane resistance and capacitance of supported bilayers. In this work, EIS was used in conjunction with vesicle leakage studies to characterize the response of bilayers of different lipid compositions to melittin. Experiments were carried out at low peptide to lipid ratios between 1:5000 and 1:100. The results directly demonstrate that the response of the bilayer to melittin at these concentrations cannot be explained by an equilibrium transmembrane pore model.

Topics: Animals; Bee Venoms; Cell Membrane Permeability; Cholesterol; Dielectric Spectroscopy; Electromagnetic Phenomena; Lipid Bilayers; Melitten; Membrane Lipids; Permeability; Phosphatidylcholines; Phosphatidylglycerols; Time Factors; Unilamellar Liposomes

We have examined the kinetics of the adsorption of melittin, a secondary amphipathic peptide extracted from bee venom, on lipid membranes using three independent and complementary approaches. We probed (i) the change in the polarity of the 19Trp of the peptide upon binding, (ii) the insertion of this residue in the apolar core of the membrane, measuring the 19Trp-fluorescence quenching by bromine atoms attached on lipid acyl chains, and (iii) the folding of the peptide, by circular dichroism (CD). We report a tight coupling of the insertion of the peptide with its folding as an alpha-helix. For all the investigated membrane systems (cholesterol-containing, phosphoglycerol-containing, and pure phosphocholine bilayers), the decrease in the polarity of 19Trp was found to be significantly faster than the increase in the helical content of melittin. Therefore, from a kinetics point of view, the formation of the alpha-helix is a consequence of the insertion of melittin. The rate of melittin folding was found to be influenced by the lipid composition of the bilayer and we propose that this was achieved by the modulation of the kinetics of insertion. The study reports a clear example of the coupling existing between protein penetration and folding, an interconnection that must be considered in the general scheme of membrane protein folding.

Topics: Animals; Bees; Cholesterol; Kinetics; Lipid Bilayers; Melitten; Membrane Proteins; Phosphatidylcholines; Phosphatidylglycerols; Protein Binding; Protein Folding; Protein Structure, Secondary; Tryptophan

Melittin (MLT), the 26-residue toxic peptide from the European honeybee Apis mellifera, is widely used for studying the principles of membrane permeabilization by antimicrobial and other host-defense peptides. A striking property of MLT is that its ability to permeabilize zwitterionic phospholipid vesicles is dramatically reduced upon the addition of anionic lipids. Because the mechanism of permeabilization may be fundamentally different for the two types of lipids, we examined MLT-induced release of entrapped fluorescent dextran markers of two different molecular masses (4 and 50 kDa) from anionic palmitoyloleoylphosphatidylglycerol (POPG) vesicles. Unlike release from palmitoyloleoylphosphatidylcholine (POPC) vesicles, which is highly selective for the 4 kDa marker, implying release through pores of about 25 A diameter [Ladokhin et al., Biophys. J. 72 (1997) 1762], release from POPG vesicles was found to be non-selective, i.e., 'detergent-like'. Oriented circular dichroism measurements of MLT in oriented POPG and POPC multilayers disclosed that alpha-helical MLT can be induced to adopt a transbilayer orientation in POPC multilayers, but not in POPG multilayers. The apparent inhibition of MLT permeabilization by anionic membranes may thus be due to suppression of translocation ability.

Topics: Circular Dichroism; Detergents; Melitten; Membranes, Artificial; Particle Size; Permeability; Phosphatidylcholines; Phosphatidylglycerols

The leakage induced by melittin, a membrane-perturbing amphipathic peptide, from large unilamellar 1-palmitoyl-2-oleoylphosphatidylcholine (POPC) vesicles was studied using calcein as fluorescent marker. The extent of leakage has been found to be regulated by the melittin/lipid molar ratio. Melittin leads to the complete release of trapped calcein from some vesicles. This all-or-none mechanism leads to the co-existence of two different vesicle populations: the 'empty' and the intact one. Intervesicular migration of melittin was not observed. The results reveal a specific targeting of the lysed vesicles by melittin. The presence of negatively charged lipids (unprotonated palmitic acid or 1-palmitoyl-2-oleoylphosphatidylglycerol) in the neutral POPC matrix inhibits the lytic power of melittin; this inhibition increases with increasing surface charge density. It is proposed that the anchorage of the peptide on the charged surface prevents the formation of defects allowing leakage. A statistical model based on a random distribution of the peptide molecules on the vesicles is proposed to describe the release induced by melittin. It is proposed that about 250 melittin molecules per vesicle are required to affect the bilayer permeability and to empty a vesicle of its content. This large number suggests that leakage is more likely due to collective membrane perturbation by the peptide rather than to the formation of a well-defined pore.

Topics: Electrochemistry; Fluoresceins; Liposomes; Melitten; Models, Statistical; Palmitic Acid; Palmitic Acids; Phosphatidylcholines; Phosphatidylglycerols; Spectrometry, Fluorescence; Structure-Activity Relationship

The helical order parameter of the 26-residue amphiphilic bee venom peptide melittin was measured by polarized attenuated total reflection infrared spectroscopy (ATR-IR) in dry phospholipid multibilayers (MBLs) and when bound to single supported planar bilayers (SPBs) under D2O. Melittin adopted an alpha-helical conformation in MBLs of dipalmitoyl-phosphatidylcholine (DPPC), 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC), a 4:1 mixture of POPC and 1-palmitoyl-2-oleoyl-phosphatidylglycerol (POPG), and when bound to SPBs of POPC:POPG (4:1). The order parameter of the alpha-helix in the bilayers depended mainly on the type of membrane preparation, and only little on the phospholipid composition of the bilayers. On hydrated SPBs, the helical order parameter was negative, indicating that the alpha-helix long axis of melittin was preferentially oriented parallel to the plane of the supported membrane. However, in dry MBLs, the helical order parameter was positive, indicating that the alpha-helix of melittin was preferentially oriented parallel to the phospholipid fatty acyl chains. It is concluded that the orientation of melittin in membranes depends on the degree of hydration of the model membranes rather than on the technique which is used for its determination. ATR-IR spectroscopy of polypeptides in or associated with supported planar membranes in D2O may become a useful tool for the determination of their orientation in and on membranes.

Topics: 1,2-Dipalmitoylphosphatidylcholine; Kinetics; Lipid Bilayers; Mathematics; Melitten; Models, Theoretical; Phosphatidylcholines; Phosphatidylglycerols; Protein Conformation; Spectrophotometry, Infrared

The binding of bee venom melittin to negatively charged unilamellar vesicles and planar lipid bilayers composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG) was studied with circular dichroism and deuterium NMR spectroscopy. The melittin binding isotherm was measured for small unilamellar vesicles containing 10 or 20 mol % POPG. Due to electrostatic attraction, binding of the positively charged melittin was much enhanced as compared to the binding to neutral lipid vesicles. However, after correction for electrostatic effects by means of the Gouy-Chapman theory, all melittin binding isotherms could be described by a partition Kp = (4.5 +/- 0.6) x 10(4) M-1. It was estimated that about 50% of the total melittin surface was embedded in a hydrophobic environment. The melittin partition constant for small unilamellar vesicles was by a factor of 20 larger than that of planar bilayers and attests to the tighter lipid packing in the nonsonicated bilayers. Deuterium NMR studies were performed with coarse lipid dispersions. Binding of melittin to POPC/POPG (80/20 mol/mol) membranes caused systematic changes in the conformation of the phosphocholine and phosphoglycerol head groups which were ascribed to the influence of electrostatic charge on the choline dipole. While the negative charge of phosphatidylglycerol moved the N+ end of the choline -P-N+ dipole toward the bilayer interior, the binding of melittin reversed this effect and rotated the N+ end toward the aqueous phase. No specific melittin-POPG complexes could be detected. The phosphoglycerol head group was less affected by melittin binding than its choline counterpart.

Topics: Bee Venoms; Choline; Circular Dichroism; Deuterium; Electrochemistry; Magnetic Resonance Spectroscopy; Melitten; Membrane Lipids; Membranes, Artificial; Phosphatidylcholines; Phosphatidylglycerols; Protein Binding; Protein Conformation