linoleic-acid has been researched along with furan* in 3 studies
3 other study(ies) available for linoleic-acid and furan
Article | Year |
---|---|
Influences of Operating Parameters on the Formation of Furan During Heating Based on Models of Polyunsaturated Fatty Acids.
Furan, a possible carcinogen, is commonly produced by thermal processing in a number of heated foods. The existence of furan levels in foods has attracted considerable attention worldwide. Recent research of furan in food has focused on the possible influences of operating parameters on the furan formation during heat processing. The aim of our study was to investigate the impacts of multiple factors (pH, temperature, heating time, ferric, and glutamic acid) on furan formation using linolenic and linoleic acids-based model systems in which furan was analyzed by headspace gas chromatography-mass spectrometry (HS-GC-MS). The results revealed that the content of furan increased rapidly when the heating temperature was elevated, with the highest levels of furan in neutral buffer solutions, the furan levels were also found to be related to heating time in all model systems. Ferric promoted furan formation from polyunsaturated fatty acids, conversely glutamic acid with an optimum concentration suppressed the furan formation. The minimal level of furan in foods during thermal treatment could be achieved via adding furan formation suppressors, and/or avoidance of furan forming promoter. Topics: alpha-Linolenic Acid; Carcinogens; Fatty Acids, Unsaturated; Furans; Gas Chromatography-Mass Spectrometry; Glutamic Acid; Hot Temperature; Hydrogen-Ion Concentration; Iron; Linoleic Acid | 2015 |
Factors affecting thermally induced furan formation.
Furan, a potential carcinogen, can be induced by heat from sugars, ascorbic acid, and fatty acids. The objective of this research was to investigate the effect of pH, phosphate, temperature, and heating time on furan formation. Heat-induced furan formation from free sugars, ascorbic acid, and linoleic acid was profoundly affected by pH and the presence of phosphate. In general, the presence of phosphate increased furan formation in solutions of sugars and ascorbic acid. In a linoleic acid emulsion, phosphate increased the formation of furan at pH 6 but not at pH 3. When an ascorbic acid solution was heated, higher amounts of furan were produced at pH 3 than at pH 6 regardless of phosphate's presence. However, in linoleic acid emulsion, more furan was produced at pH 6 than at pH 3. The highest amount of furan was formed from the linoleic acid emulsion at pH 6. In fresh apple cider, a product with free sugars as the major components (besides water) and little fatty acids, ascorbic acid, or phosphate, small or very low amounts of furan was formed by heating at 90-120 degrees C for up to 10 min. The results indicated that free sugars may not lead to significant amounts of furan formation under conditions for pasteurization and sterilization. Importantly, this is the first report demonstrating that phosphate (in addition to pH) plays a significant role in thermally induced furan formation. Topics: Ascorbic Acid; Beverages; Carbohydrates; Food Handling; Furans; Hot Temperature; Hydrogen-Ion Concentration; Linoleic Acid; Malus; Phosphates | 2008 |
Quantitation of furan and methylfuran formed in different precursor systems by proton transfer reaction mass spectrometry.
Furan has recently received attention as a possibly hazardous compound occurring in certain thermally processed foods. Previous model studies have revealed three main precursor systems producing furan upon thermal treatment, i.e., ascorbic acid, Maillard precursors, and polyunsaturated lipids. We employed proton transfer reaction mass spectrometry (PTR-MS) as an on-line monitoring technique to study furan formation. Unambiguous identification and quantitation in the headspace was achieved by PTR-MS/gas chromatography-mass spectrometry coupling. Ascorbic acid showed the highest potential to generate furan, followed by glyceryl trilinolenate. Some of the reaction samples generated methylfuran as well, such as Maillard systems containing alanine and threonine as well as lipids based on linolenic acid. The furan yields from ascorbic acid were lowered in an oxygen-free atmosphere (30%) or in the presence of reducing agents (e.g., sulfite, 60%), indicating the important role of oxidation steps in the furan formation pathway. Furthermore, already simple binary mixtures of ascorbic acid and amino acids, sugars, or lipids reduced furan by 50-95%. These data suggest that more complex reaction systems result in much lower furan amounts as compared to the individual precursors, most likely due to competing reaction pathways. Topics: Ascorbic Acid; Fatty Acids, Unsaturated; Food Handling; Furans; Gas Chromatography-Mass Spectrometry; Hot Temperature; Linoleic Acid; Maillard Reaction; Mass Spectrometry; Methylation | 2006 |