lactoferrin and tert-butylacrylamide

Continued advance of a new temperature-controlled chromatography system, comprising a column filled with thermoresponsive stationary phase and a travelling cooling zone reactor (TCZR), is described. Nine copolymer grafted thermoresponsive cation exchangers (thermoCEX) with different balances of thermoresponsive (N-isopropylacrylamide), hydrophobic (N-tert-butylacrylamide) and negatively charged (acrylic acid) units were fashioned from three cross-linked agarose media differing in particle size and pore dimensions. Marked differences in grafted copolymer composition on finished supports were sourced to base matrix hydrophobicity. In batch binding tests with lactoferrin, maximum binding capacity (qmax) increased strongly as a function of charge introduced, but became increasingly independent of temperature, as the ability of the tethered copolymer networks to switch between extended and collapsed states was lost. ThermoCEX formed from Sepharose CL-6B (A2), Superose 6 Prep Grade (B2) and Superose 12 Prep Grade (C1) under identical conditions displayed the best combination of thermoresponsiveness (qmax,50°C/qmax,10°C ratios of 3.3, 2.2 and 2.8 for supports 'A2', 'B2' and 'C1' respectively) and lactoferrin binding capacity (qmax,50°C∼56, 29 and 45mg/g for supports 'A2', 'B2' and 'C1' respectively), and were selected for TCZR chromatography. With the cooling zone in its parked position, thermoCEX filled columns were saturated with lactoferrin at a binding temperature of 35°C, washed with equilibration buffer, before initiating the first of 8 or 12 consecutive movements of the cooling zone along the column at 0.1mm/s. A reduction in particle diameter (A2→B2) enhanced lactoferrin desorption, while one in pore diameter (B2→C1) had the opposite effect. In subsequent TCZR experiments conducted with thermoCEX 'B2' columns continuously fed with lactoferrin or 'lactoferrin+bovine serum albumin' whilst simultaneously moving the cooling zone, lactoferrin was intermittently concentrated at regular intervals within the exiting flow as sharp uniformly sized peaks. Halving the lactoferrin feed concentration to 0.5mg/mL, slowed acquisition of steady state, but increased the average peak concentration factor from 7.9 to 9.2. Finally, continuous TCZR mediated separation of lactoferrin from bovine serum albumin was successfully demonstrated. While the latter's presence did not affect the time to reach steady state, the average lactoferrin mass per peak and concentration factor b

Topics: Acrylamides; Buffers; Cations; Chemistry Techniques, Analytical; Chromatography, High Pressure Liquid; Lactoferrin; Polymers; Protein Binding; Sepharose; Temperature

A temperature-responsive ion-exchange resin (ItBA) has been prepared by grafting poly(N-isopropylacrylamide-co-acrylic acid-co-tert-butylacrylamide; ItBA) onto cross-linked agarose. A carboxymethylated ion exchanger (CM) of similar charge density was also prepared. Maximum adsorption capacities (B(max)) for lactoferrin at 20 degrees C and 50 degrees C were determined for both resins by batch adsorption procedures. Dynamic adsorption and desorption characteristics of the CM and ItBA with lactoferrin were established, as well as the ability of ItBA to selectively adsorb and desorb lactoferrin in the presence of other proteins. With the CM-agarose resin there was no significant difference between the B(max) values obtained at 20 degrees C and 50 degrees C. However, for the agarose-based ItBA resin the B(max) value at 50 degrees C was almost three times higher than the B(max) value at 20 degrees C. Dynamically, lactoferrin adsorbed to the ItBA packed column at 50 degrees C with a significant proportion of the adsorbed lactoferrin desorbed by reducing the temperature to 20 degrees C. In addition, anionic proteins did not adsorb to the ItBA packed column, and did not interfere with the dynamic adsorption/desorption behaviour of lactoferrin. These results indicate that this new temperature-responsive agarose-based ItBA resin has potential for the fractionation of whey proteins, with good selectivity for cationic proteins.

Topics: Acrylamides; Adsorption; Animals; Cattle; Chemical Fractionation; Chromatography, Ion Exchange; Cross-Linking Reagents; Ion Exchange Resins; Lactalbumin; Lactoferrin; Lactoglobulins; Magnetic Resonance Spectroscopy; Models, Chemical; Sepharose; Sodium Chloride; Solutions; Solvents; Temperature