gma-edma and ethylene-dimethacrylate

This review summarizes the preparation and application of chromatographic separation media based on methacrylate monomers with a major focus on highly crosslinked macroporous beads prepared from 2-hydroxyethyl methacrylate and glycidyl methacrylate, respectively. The effects of process variables such as composition of the polymerization mixture that includes monomers, porogenic solvents, and free radical initiator, suspension stabilizer, reaction temperature, and stirring are detailed for both classical and templated suspension polymerization. In addition, specific features of the preparation of monodisperse beads are also discussed. The performance of methacrylate-based separation media is demonstrated on numerous separations in a variety of chromatographic modes.

Topics: Chromatography; Methacrylates; Methylmethacrylates; Microscopy, Electron, Scanning; Microspheres

Topics: Epoxy Compounds; Glycopeptides; Indoles; Isoindoles; Methacrylates; Methylmethacrylates; Organometallic Compounds; Polymers; Transferrin

In order to investigate the effect of the linking spacer on the enantioseparation ability of β-cyclodextrin (β-CD) functionalized polymeric monoliths, three β-CD-functionalized organic polymeric monoliths with different spacer lengths were prepared by using three amino-β-CDs, i.e. mono-6-amino-6-deoxy-β-CD, mono-6-ethylenediamine-6-deoxy-β-CD, mono-6-hexamethylenediamine-6-deoxy-β-CD, as starting materials. These amino-β-CDs reacted with glycidyl methacrylate to produce functional monomers which were then copolymerized with ethylene dimethacrylate. The enantioseparation ability of the three monoliths was evaluated using 14 chiral acidic compounds, including mandelic acid derivatives, nonsteroidal anti-inflammatory drugs, N-derivatized amino acids, and chiral herbicides under optimum chromatographic conditions. Notably, the poly(GMA-NH2-β-CD-co-EDMA) column provides higher enantioresolution and enantioselectivity than the poly(GMA-EDA-β-CD-co-EDMA) and poly(GMA-HDA-β-CD-co-EDMA) columns for most tested chiral analytes. Furthermore, the enantioseparation performance of triazole-linker containing monoliths was compared to that of ethylenediamine-linker containing monoliths. The results indicate that the enantioselectivity of β-CD monolithic columns is strongly related to the length and type of spacer tethering β-CD to the polymeric support.

Topics: Amination; Amino Acids; Anti-Inflammatory Agents, Non-Steroidal; beta-Cyclodextrins; Chromatography, High Pressure Liquid; Epoxy Compounds; Ethylenediamines; Mandelic Acids; Methacrylates; Methylmethacrylates; Polymerization; Stereoisomerism; Triazoles

This study is concerned with the incorporation of surface modified fumed silica nanoparticles (FSNPs) into polymethacrylate based monolithic columns for use in reversed phase chromatography (RPC) of small solutes and proteins. First, FSNPs were modified with 3-(trimethoxysilyl)propylmethacrylate (TMSPM) to yield the "hybrid" methacryloyl fumed silica nanoparticle (MFSNP) monomer. The resulting MFSNP was then mixed with glyceryl monomethacrylate (GMM) and ethylene dimethacrylate (EDMA) in a binary porogenic solvent composed of cyclohexanol and dodecanol, and the in situ copolymerization of MFSNP, GMM and EDMA was performed in a stainless steel column of 4.6 mm i.d. The silanol groups of the hybrid monolith thus obtained were grafted with octadecyl ligands by perfusing the hybrid monolithic column with a solution of 4% w/v of dimethyloctadecylchlorosilane (DODCS) in toluene while the column was maintained at 110°C for 6h (in a heated HPLC oven). One of the originalities of this study was to demonstrate MFSNP as a novel derivatized "hybrid monomer" in making RPC monolithic columns with surface bound octadecyl ligands. In this respect, the RPC behavior of the monolithic column with "covalently" incorporated FNSPs having surface grafted octadecyl ligands was evaluated with alkylbenzenes, aniline derivatives and phenolic compounds. The results showed that the hybrid poly(GMA-EDMA-MFSNP) having surface bound octadecyl ligands exhibited hydrophobic interactions under reversed phase elution conditions. Furthermore, six standard proteins were baseline separated on the column using a 10min linear gradient elution at increasing ACN concentration in the mobile phase at a flow rate of 1.0mL/min using a 10 cm×4.6mm i.d. column. The relative standard deviations (RSDs) for the retention times of the tested solutes were lower than 2.1% and 2.4% under isocratic elution and gradient elution conditions, respectively.

Topics: Chemistry Techniques, Analytical; Chromatography, Reverse-Phase; Glycerides; Hydrophobic and Hydrophilic Interactions; Ligands; Methacrylates; Methylmethacrylates; Nanoparticles; Polymerization; Polymethacrylic Acids; Proteins; Silicon Dioxide; Solutions; Solvents

A new thermally switchable molecularly imprinted monolith for the selective capture and release of proteins has been designed. First, a generic poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolith reacted with ethylenediamine followed by functionalization with 2-bromoisobutyryl bromide to introduce the initiator for atom transfer radical polymerization. Subsequently, a protein-imprinted poly(N-isopropylacrylamide) layer was grafted onto the surface of the monolithic matrix by atom transfer radical polymerization. Scanning electron microscopy and energy-dispersive X-ray spectroscopy of the cross-sections of imprinted monoliths confirmed the formation of dense poly(N-isopropylacrylamide) brushes on the pore surface. The imprinted monolith exhibited high specificity and selectivity toward its template protein myoglobin over competing proteins and a remarkably large maximum adsorption capacity of 1641 mg/g. Moreover, this "smart" imprinted monolith featured thermally responsive characteristics that enabled selective capture and easy release of proteins triggered only by change in temperature with water as the mobile phase and avoided use of stronger organic solvents or change in ionic strength and pH.

Topics: Adsorption; Chromatography; Epoxy Compounds; Hydrogen-Ion Concentration; Methacrylates; Methylmethacrylates; Microscopy, Electron, Scanning; Molecular Imprinting; Myoglobin; Osmolar Concentration; Polymerization; Polymers; Temperature

A facile and efficient "one-pot" copolymerization strategy was used for the preparation of sulfonamide drug (SA) functionalized monolithic columns. Two novel SA-immobilized methacrylate monolithic columns, i.e. poly(GMA-SMX-co-EDMA) and poly(GMA-SAA-co-EDMA) were prepared by one-pot in situ copolymerization of the drug ligand (sulfamethoxazole (SMX) or sulfanilamide (SAA)), the monomer (glycidyl methacrylate, GMA) and the cross-linker (ethylene dimethacrylate, EDMA) within 100 μm i.d. capillaries under optimized polymerization conditions. The physicochemical properties and column performance of the fabricated monolithic columns were characterized by elemental analysis, scanning electron microscopy and micro-HPLC. Satisfactory column permeability, efficiency and separation performance were obtained on the optimized poly(GMA-SMX-co-EDMA) monolithic column for small molecules, such as a standard test mixture and eight aromatic ketones. Notably, it was found that the poly(GMA-SMX-co-EDMA) monolith showed a selective affinity to trypsin, while the poly(GMA-SAA-co-EDMA) monolith containing sulfanilamide did not exhibit such affinity at all. This research not only provides a novel monolith for the selective isolation and purification of trypsin, but it also offers the possibility to easily prepare novel drug functionalized methacrylate monoliths through a one-pot copolymerization strategy.

Topics: Chemistry Techniques, Analytical; Chromatography, High Pressure Liquid; Epoxy Compounds; Methacrylates; Methylmethacrylates; Microscopy, Electron, Scanning; Permeability; Polymerization; Sulfamethoxazole; Trypsin

The protein modified monolithic column in affinity capillary electrochromatography (CEC) has attracted considerable attention over the past decades because of its great enantioseparation ability. A porous polymethacrylate ester-based capillary monolithic column poly (glycidyl methacrylate-co-ethyleneglycol dimethacrylate) (poly (GMA-co-EDMA)) was prepared by in situ co-polymerization. The process was initiated thermally by azobisisobutyronitrile (AIBN). The polymerization mixture contained GMA as the function monomer and EDMA as the crosslinking agent with 1,4-butanediol and 1-propanol as the binary porogen solvent. Under the optimized reaction conditions, including the proportion of monomer and porogens, reaction temperature etc, the column exhibited a uniform structure, sufficient permeability and excel- lent pressure resistance. The separation of alkyl benzenes on the column was mainly based on typical reversed-phase chromatographic retention mechanism. The reproducibility and stability were good with RSDs less than 9. 0%. A pepsin functionalized organic polymer monolith was prepared by covalently bonded pepsin to poly(GMA-co-EDMA) monolith with glutaraldehyde as a spacer based on the activity of epoxide group. The enantioseparation performance of the pepsin affinity monolith for basic enantiomers has been investigated by CEC. Nefopam, amlodipine, citalopram and chlorpheniramine were resolved, and baseline separations of nefopam, amlodipine, citalopram were achieved. The influences of pH, operating voltage, temperature and sample quantity used on the chiral separation were studied. The chiral recognition mechanism of enantiomers on the monolithic column in CEC is discussed. This work developed a new method for the prepataion and application of protein affinity monolith in CEC.

Topics: Butylene Glycols; Capillary Electrochromatography; Chromatography, Reverse-Phase; Epoxy Compounds; Methacrylates; Methylmethacrylates; Pepsin A; Polymers; Polymethacrylic Acids; Porosity; Reproducibility of Results; Stereoisomerism