germanium and titanium-dioxide

We report a linear-scaling density functional theory (DFT) study of the structure, wall-polarization absolute band-alignment and optical absorption of several, recently synthesized, open-ended imogolite (Imo) nanotubes (NTs), namely single-walled (SW) aluminosilicate (AlSi), SW aluminogermanate (AlGe), SW methylated aluminosilicate (AlSi-Me), and double-walled (DW) AlGe NTs. Simulations with three different semi-local and dispersion-corrected DFT-functionals reveal that the NT wall-polarization can be increased by nearly a factor of four going from SW-AlSi-Me to DW-AlGe. Absolute vacuum alignment of the NT electronic bands and comparison with those of rutile and anatase TiO2 suggest that the NTs may exhibit marked propensity to both photo-reduction and hole-scavenging. Characterization of the NTs' band-separation and optical properties reveal the occurrence of (near-)UV inside-outside charge-transfer excitations, which may be effective for electron-hole separation and enhanced photocatalytic activity. Finally, the effects of the NTs' wall-polarization on the absolute alignment of electron and hole acceptor states of interacting water (H2O) molecules are quantified and discussed.

Topics: Aluminum Silicates; Catalysis; Chemistry, Physical; Electrons; Germanium; Humans; Models, Molecular; Molecular Structure; Nanotubes; Quantum Theory; Surface Properties; Titanium; Ultraviolet Rays; Water

The ITO (indium tin oxide) conductive glass-matrix CuS-GeO2-TiO2 composite coating was generated via EPD (electrophoretic deposition) and followed by a sintering treatment at 450°C for 40 minutes. Characterizations of the CuS-GeO2-TiO2 composite coating were taken by SEM (scanning electron microscope), XRD (X-ray diffraction), EDX (energy dispersive X-ray), UV-Vis DRS (ultraviolet-visible diffuse reflection spectrum), and FT-IR (Fourier transform infrared spectroscopy). Results showed that CuS and GeO2 had dispersed in this CuS-GeO2-TiO2 composite coating (mass percentages for CuS and GeO2 were 1.23% and 2.79%, respectively). The electrochemical studies (cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and Tafel polarization) of this CuS-GeO2-TiO2 composite coating electrode were performed in pH = 9.51 Na2CO3-NaHCO3 buffer solution containing 0.50 mol/L CH3OH under the conditions of visible light, ultraviolet light (λ = 365 nm), and dark (without light irradiation as control), respectively. Electrochemical studies indicated that this CuS-GeO2-TiO2 composite coating electrode had better photoelectrocatalytic activity than the pure TiO2 electrode in the electrocatalysis of methanol under visible light.

Topics: Catalysis; Copper; Electrochemical Techniques; Electrodes; Germanium; Methanol; Photochemical Processes; Sulfides; Tin Compounds; Titanium

Germanium doped TiO(2) was prepared by homogeneous hydrolysis of aqueous solutions of GeCl(4) and TiOSO(4) with urea. The synthesized samples were characterized by X-ray diffraction, scanning electron microscopy, EDS analysis, specific surface area (BET) and porosity determination (BJH). Ge(4+) doping increases surface area and content of amorphous phase in prepared samples. These oxides were used in an experimental evaluation of their reactivity with chemical warfare agent, sulphur mustard, soman and agent VX. Ge(4+) doping worsens sulphur mustard degradation and improves soman and agent VX degradation. The best degree of removal (degradation), 100% of soman, 99% of agent VX and 95% of sulphur mustard, is achieved with sample with 2 wt.% of germanium.

Topics: Chemical Warfare Agents; Decontamination; Germanium; Metal Nanoparticles; Mustard Gas; Organothiophosphorus Compounds; Soman; Titanium

Interest in using (68)Ga is rapidly increasing for clinical PET applications due to its favorable imaging characteristics and increased accessibility. The focus of this study was to provide our long-term evaluations of the two TiO(2)-based (68)Ge/(68)Ga generators and develop an optimized automation strategy to synthesize [(68)Ga]DOTATOC by using HEPES as a buffer system. This data will be useful in standardizing the evaluation of (68)Ge/(68)Ga generators and automation strategies to comply with regulatory issues for clinical use.

Topics: Automation; Gallium Radioisotopes; Germanium; Octreotide; Titanium

Adding a small amount of commercial GeO(2) into aqueous suspension significantly enhanced the photocatalytic activity of titania-based photocatalysts for the degradation of dyes.

Topics: Catalysis; Germanium; Photolysis; Suspensions; Titanium

This work focuses on the synthesis and characterization of gold films grown via galvanic displacement on Ge(111) substrates. The synthetic approach uses galvanic displacement, a type of electroless deposition that takes place in an efficient manner under aqueous, room temperature conditions. Investigations involving X-ray diffraction (XRD) and transmission electron microscopy (TEM) techniques were performed to study the crystallinity and orientation of the resulting gold-on-germanium films. A profound effect of HF(aq) concentration was noted, and although the SEM images did not show significant differences in the resulting gold films, a host of X-ray diffraction studies demonstrated that higher concentrations of HF(aq) led to epitaxial gold-on-germanium, whereas in the absence of HF(aq), lower degrees of order (fiber texture) resulted. Cross-sectional nanobeam diffraction analyses of the Au-Ge interface confirmed the epitaxial nature of the gold-on-germanium film. This epitaxial behavior can be attributed to the simultaneous etching of the germanium oxides, formed during the galvanic displacement process, in the presence of HF. High-resolution TEM analyses showed the coincident site lattice (CSL) interface of gold-on-germanium, which results in a small 3.8% lattice mismatch due to the coincidence of four gold lattices with three of germanium.

Topics: Crystallization; Electromagnetic Fields; Electroplating; Germanium; Gold; Macromolecular Substances; Materials Testing; Membranes, Artificial; Molecular Conformation; Nanostructures; Nanotechnology; Particle Size; Surface Properties; Titanium

Biomimetic synthesis is emerging as an advantageous alternative to the harsh synthetic conditions traditionally used in metal oxide syntheses techniques. Silaffins, proteins from the C. fusiformis diatom, form silica in an aqueous environment under benign conditions. Amine terminated PAMAM and PPI dendrimers are effective mimics of silaffins and other silica precipitating polyamines. We have expanded the scope of dendrimer mediated metal oxide formation to include titanium dioxide, a photocatalyst, and germanium dioxide, a blue photoluminescent material. The nanoparticles were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (IR), and X-ray diffraction patterns (XRD). A variable temperature XRD analysis of TiO(2) nanoparticles was conducted to study the transition from anatase to rutile. TiO(2) nanoparticles synthesized in phosphate buffer showed a 200 degrees C decrease in the anatase to rutile transition temperature relative to TiO(2) templated in water. XRD analysis of GeO(2) nanoparticles in either water or phosphate buffer reveal crystalline alpha-phase germanium oxide. To our knowledge, this is the first report of the synthesis of crystalline GeO(2) under ambient conditions.

Topics: Biomimetic Materials; Buffers; Catalysis; Dendrimers; Germanium; Microscopy, Electron, Scanning; Nanoparticles; Photochemistry; Spectroscopy, Fourier Transform Infrared; Titanium; Transition Temperature; Water; X-Ray Diffraction