g(m2)-ganglioside and tetramethylrhodamine

We report a system that allows the simultaneous aspiration of one or more cells into each of five capillaries for electrophoresis analysis. A glass wafer was etched to create an array of 1-nL wells. The glass was treated with poly(2-hydroxyethyl methacrylate) to control cell adherence. A suspension of formalin-fixed cells was placed on the surface, and cells were allowed to settle. The concentration of cells and the settling time were chosen so that there was, on average, one cell per well. Next, an array of five capillaries was placed so that the tip of each capillary was in contact with a single well. A pulse of vacuum was applied to the distal end of the capillaries to aspirate the content of each well into a capillary. Next, the tips of the capillaries were placed in running buffer and potential was applied. The cells lysed upon contact with the running buffer, and fluorescent components were detected at the distal end of the capillaries by laser-induced fluorescence. The electrophoretic separation efficiency was outstanding, generating over 750,000 theoretical plates (1,800,000 plates/m). In this example, AtT-20 cells were used that had been treated with TMR-G(M1). The cells were allowed to metabolize this substrate into a series of products before the cells were fixed. The number of cells found in each well was estimated visually under the microscope and was described by a Poisson distribution with mean of 0.98 cell/well. This system provides an approach to high-throughput chemical cytometry.

Topics: Animals; Cell Line; Ceramides; Electrophoresis, Capillary; Flow Cytometry; Fluorescent Dyes; G(M1) Ganglioside; G(M2) Ganglioside; Gangliosides; Nanotechnology; Rhodamines

Ganglioside GM1 and its seven potential catabolic products: asialo-GM1, GM2, asialo-GM2, GM3, Lac-Cer, Glc-Cer and Cer, were labeled with tetramethylrhodamine (TMR) to permit ultra-sensitive analysis using laser-induced fluorescence (LIF) detection. The preparation involved acylation of the homogenous C(18)lyso-forms of GM1, Lac-Cer, Glc-Cer and Cer with the N-hydroxysuccinimide ester of a beta-alanine-tethered 6-TMR derivative, followed by conversion of these labeled products using galactosidase, sialidase, and sialyltransferase enzymes. The TMR-glycolipid analogs produced are detectable on TLC down to the 1 ng level by the naked eye. All eight compounds could be separated within 4 min in capillary electrophoresis where they could be detected at the zeptomole (ca. 1000 molecule) level using LIF.

Topics: Animals; Cattle; Electrophoresis, Capillary; Fluorescent Dyes; G(M1) Ganglioside; G(M2) Ganglioside; G(M3) Ganglioside; Gangliosides; Neuraminidase; Reference Standards; Rhodamines