elastin and arginyl-glycyl-aspartic-acid

Matrikines, peptides originating from the fragmentation of extracellular matrix proteins are identified to play important role in both health and disease. They possess biological activities, much different from their parent protein. Identification of such bioactive cryptic regions in the extracellular matrix proteins has attracted the researchers all over the world in the recent decade. These bioactive peptides could find use in preparation of biomaterials and tissue engineering applications. Matrikines identified in major extracellular matrix (ECM) proteins like collagen, elastin, fibronectin, and laminin are being extensively studied for use in tissue engineering and regenerative medicine. They are identified to modulate cellular activity like cell growth, proliferation, migration and may induce apoptosis. RGD, a well-known peptide identified in fibronectin with cell adhesive property is being investigated in designing biomaterials. Collagen hexapeptide GFOGER was found to promote cell adhesion and differentiation. Laminin also possesses regions with strong cell adhesion property. Recently, cell-penetrating peptides from elastin are used as a targeted delivery system for therapeutic drugs. The continued search for cryptic sequences in the extracellular matrix proteins along with advanced peptide coupling chemistries would lead to biomaterials with improved surface properties. This review article outlines the peptides derived from extracellular matrix and some of the possible applications of these peptides in therapeutics and tissue engineering applications.

Topics: Cell Adhesion; Collagen; Drug Delivery Systems; Elastin; Extracellular Matrix Proteins; Fibronectins; Humans; Laminin; Oligopeptides; Peptide Fragments

Topics: Amino Acid Sequence; Animals; Bacterial Adhesion; Binding Sites; Elastin; Extracellular Matrix; Galactosyltransferases; Glycolipids; Integrins; Laminin; Lectins; Molecular Sequence Data; Oligopeptides; Polysaccharides; Protein Binding; Protein Conformation; Receptors, Cell Surface; Receptors, Immunologic; Receptors, Laminin

In this work, we expand on our understanding of the thrombogenicity of coatings prepared with three different recombinant elastin-like polypeptides (ELPs). The bulk platelet response of the ELP coatings was characterized following whole blood contact under physiological shear flow (300 s(-1) ) using flow cytometry. Prolonged exposure to shear flow (1-h) indicated that materials coated with the longer ELP coatings (ELP2 and ELP4) had less bulk platelet activation and microparticle formation than materials coated with the shorter ELP1. Quartz crystal microbalance with dissipation (QCM-D) was used to monitor the binding of the platelet membrane receptor GPIIb/IIIa to ELP-adsorbed fibrinogen (Fg) surfaces. Compared to the shorter ELPs, a lower amount of Fg adsorbed to the ELP4 coated material and ELP4 appeared to form a softer, more structurally flexible coating layer. When Fg was adsorbed to the ELP coated surface it demonstrated an altered binding for GPIIb/IIIa that was inhibited in the presence of an AGDV-containing peptide but not an RGD-containing peptide. Conversely, on the shorter ELP coatings, binding of GPIIb/IIIa to an adsorbed Fg layer was partially inhibited in the presence of an RGD-containing peptide. These results indicate that both the quantity and conformational state of Fg varies when adsorbed to surfaces coated with ELPs of varying sequence length, which may be mediating their platelet response. Collectively, the findings reinforce the applicability of the ELPs as potential thromboresistant coatings, especially with the use of the longer polypeptide-ELP4.

Topics: Blood Platelets; Coated Materials, Biocompatible; Elastin; Female; Fibrinogen; Humans; Male; Materials Testing; Oligopeptides; Platelet Glycoprotein GPIIb-IIIa Complex

Regulating stem cell functions by precisely controlling the nanoscale presentation of bioactive ligands has a substantial impact on tissue engineering and regenerative medicine but remains a major challenge. Here it is shown that bioactive ligands can become mechanically "invisible" by increasing their tether lengths to the substrate beyond a critical length, providing a way to regulate mechanotransduction without changing the biochemical conditions. Building on this finding, light switchable tethers are rationally designed, whose lengths can be modulated reversibly by switching a light-responsive protein, pdDronpa, in between monomer and dimer states. This allows the regulation of the adhesion, spreading, and differentiation of stem cells by light on substrates of well-defined biochemical and physical properties. Spatiotemporal regulation of differential cell fates on the same substrate is further demonstrated, which may represent an important step toward constructing complex organoids or mini tissues by spatially defining the mechanical cues of the cellular microenvironment with light.

Topics: Cell Adhesion; Cell Differentiation; Dimerization; Elastin; Humans; Integrins; Ligands; Light; Luminescent Proteins; Mechanotransduction, Cellular; Mesenchymal Stem Cells; Microscopy, Atomic Force; Oligopeptides; Protein Engineering

Biomaterial design in tissue engineering aims to identify appropriate cellular microenvironments in which cells can grow and guide new tissue formation. Despite the large diversity of synthetic polymers available for regenerative medicine, most of them fail to fully match the functional properties of their native counterparts. In contrast, the few biological alternatives employed as biomaterials lack the versatility that chemical synthesis can offer. Herein, we studied the HUVEC adhesion and proliferation properties of elastin-like recombinamers (ELRs) that were covalently functionalized with each three high-affinity and selectivity α

Topics: Biocompatible Materials; Cell Adhesion; Cell Proliferation; Cells, Cultured; Elastin; Genetic Engineering; Human Umbilical Vein Endothelial Cells; Humans; Integrin alphaVbeta3; Oligopeptides; Peptides; Polymers; Protein Binding; Receptors, Vitronectin; Regenerative Medicine; Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization; Tissue Engineering

Successful islet transplantation critically depends on the isolation of healthy islets. However, the islet isolation procedure itself contributes to islet death due to the destruction of intra- and peri-islet extracellular matrices (ECMs) during digestion. We investigated whether an RGD-containing elastin-like polypeptide (REP) could function as a self-assembling matrix to replenish ECMs and protects islets from cell death. Immediately following isolation, islets were coated with REP coacervate particles via isothermal adsorption of an REP solution followed by thermal gelation. REP-coated islets displayed increased viability and insulin secretory capacity in pretransplant culture compared to untreated islets. Co-transplantation of REP-treated islets and REP beneath the renal sub-capsule in streptozotocin-induced diabetic mice restored normoglycemia and serum insulin levels. Mice that received co-transplants maintained normoglycemia for a longer period of time than those receiving untreated islets without REP. Moreover, co-transplantation sites exhibited enhanced β-cell proliferation and vascularization. Thus, the REP-based coacervation strategy improve the survival, function and therapeutic potential of transplanted islets. STATEMENT OF SIGNIFICANCE: 1). An artificial matrix polypeptide comprised of thermoresponsive elastin-like peptides and integrin-stimulatory RGD ligands (REP) to reconstitute damaged or lost matrices. 2). Through body temperature-induced coacervation, REP reconstitutes intra-islet environment and enhances islet viability and insulin secretion by activating the pro-survival and insulin signaling pathways. 3). REP-coated islets were transplanted together with the matrix polypeptide under the kidney sub-capsule of mice, it develops a new peri-insular environment, which protects the islet grafts from immune rejection thus extending islet longevity. 4). Our data suggest that in situ self-assembly of biomimetic islet environments become a new platform allowing for improved islet transplantation at extrahepatic sites.

Topics: Animals; Blood Glucose; Cell Line; Cell Proliferation; Cell Survival; Diabetes Mellitus, Experimental; Elastin; Gene Expression Regulation; Insulin; Insulin Secretion; Islets of Langerhans; Islets of Langerhans Transplantation; Male; Mice; Mice, Inbred C57BL; Oligopeptides; Rats, Sprague-Dawley; RNA, Messenger; Signal Transduction; Treatment Outcome

Herein we present a system to obtain fibers from clickable elastin-like recombinamers (ELRs) that crosslink in situ during the electrospinning process itself, with no need for any further treatment to stabilize them. These ELR-click fibers are completely stable under in vitro conditions. A wrinkled fiber morphology is obtained. In addition to a random fiber orientation, oriented fibers with a high degree of alignment and coherence can also be obtained by using a rotational electrode. The production of multicomponent fibers means that different functionalities, such as cell-adhesion domains (RGD peptides), can be incorporated into them. In a subsequent study, two main cell lines present in the dermis and epidermis, namely keratinocytes and fibroblasts, were cultured on top of the ELR-click fibers. Adhesion, proliferation, fluorescence, immunostaining and histology studies showed the cytocompatibility of these scaffolds, thus suggesting their possible use for wound dressings in skin tissue engineering applications.. For the first time stable electrospun bioactive fibers are obtained by the in situ mixing of two "clickable" ELR components previously described by Gonzalez et al (Acta Biomaterialia 2014). This work describes an efficient system to prepare fibrous scaffolds based on peptidic polymers by electrospinning without the need of crosslinking agents that could be harmful for cells or living tissues. These bioactive fibers support cell growth due to the inclusion of RGD motifs (Staubli et al. Biomaterials 2017). Finally, the in vitro biocompatibility of the two main cell types found in the outer layers of skin, fibroblasts and keratinocytes, indicates that this system is of great interest to prepare elastic artificial skin substitutes for wound healing applications.

Topics: Cell Line, Transformed; Click Chemistry; Dermis; Elastin; Fibroblasts; Humans; Keratinocytes; Oligopeptides; Tissue Engineering; Tissue Scaffolds

The morbidity of bone fractures and defects is steadily increasing due to changes in the age pyramid. As such, novel biomaterials that are able to promote the healing and regeneration of injured bones are needed to overcome the limitations of auto-, allo-, and xenografts, while providing a ready-to-use product that may help to minimize surgical invasiveness and duration. In this regard, recombinant biomaterials, such as elastin-like recombinamers (ELRs), are very promising as their design can be tailored by genetic engineering, thus allowing scalable production and batch-to-batch consistency, among others. Furthermore, they can self-assemble into physically crosslinked hydrogels above a certain transition temperature, in this case body temperature, but are injectable below this temperature, thereby markedly reducing surgical invasiveness. In this study, we have developed two bioactive hydrogel-forming ELRs, one including the osteogenic and osteoinductive bone morphogenetic protein-2 (BMP-2) and the other the Arg-Gly-Asp (RGD) cell adhesion motif. The combination of these two novel ELRs results in a BMP-2-loaded extracellular matrix-like hydrogel. Moreover, elastase-sensitive domains were included in both ELR molecules, thereby conferring biodegradation as a result of enzymatic cleavage and avoiding the need for scaffold removal after bone regeneration. Both ELRs and their combination showed excellent cytocompatibility, and the culture of cells on RGD-containing ELRs resulted in optimal cell adhesion. In addition, hydrogels based on a mixture of both ELRs were implanted in a pilot study involving a femoral bone injury model in New Zealand white rabbits, showing complete regeneration in six out of seven cases, with the other showing partial closure of the defect. Moreover, bone neoformation was confirmed using different techniques, such as radiography, computed tomography, and histology. This hydrogel system therefore displays significant potential in the regeneration of bone defects, promoting self-regeneration by the surrounding tissue with no involvement of stem cells or osteogenic factors other than BMP-2, which is released in a controlled manner by elastase-mediated cleavage from the ELR backbone.

Topics: Absorbable Implants; Animals; Bone Morphogenetic Protein 2; Bone Regeneration; Elastin; Extracellular Matrix; Female; Femur; Humans; Hydrogels; Oligopeptides; Protein Domains; Rabbits

Self-assembling peptides are attractive materials for tissue engineering applications because of their functionality including high biocompatibility and biodegradability. Modification of self-assembling peptides with functional motifs, such as the cell-adhesive tripeptide sequence RGD leads to functional artificial extracellular matrices (ECMs). In this study, we developed an artificial self-assembling ECM protein tethered with a growth factor via heterotrimer triple-helix (helix A/B/C) formation. The helix A and helix C peptides, which are capable of forming a heterodimer coiled-coil structure, were fused to both ends of a matrix protein composed of the elastin-derived structural unit (APGVGV)

Topics: Cell Adhesion; Cell Proliferation; Elastin; Escherichia coli; Extracellular Matrix; Extracellular Matrix Proteins; Fibroblast Growth Factor 2; Human Umbilical Vein Endothelial Cells; Humans; Microscopy, Electron, Transmission; Oligopeptides; Plasmids; Protein Binding; Protein Conformation; Protein Engineering

The biochemical, mechanical and topographic properties of extracellular matrix are crucially involved in determining skeletal muscle cell morphogenesis, proliferation and differentiation. Human elastin-like polypeptides (HELPs) are recombinant biomimetic proteins designed to mimic some properties of the native matrix protein; when employed as myoblast adhesion substrates, they stimulate in vitro myogenesis. Given the influence that the biophysical properties of extracellular matrix have on skeletal muscle cells, the aim of this work was to investigate the effects of HELP hydrogels on myoblasts' viability and functions.. We recently synthesized a novel polypeptide, HELPc, by fusing the elastin-like backbone to a 41aa sequence present in the α2 chain of type IV collagen, containing two arginyl-glycyl-aspartic acid (RGD) motifs. To obtain hydrogels, the enzymatic cross-linking of the HELPc was accomplished by transglutaminase. Here, we employed both non-cross-linked HELPc glass coatings and cross-linked HELPc hydrogels at different monomer densities, as adhesion substrates for C2C12 cells, used as a myoblast model.. By comparing cell adhesion, proliferation and differentiation, we revealed several striking differences. Depending on support rigidity, adhesion to HELPc substrates dictated cell morphology, spreading, focal adhesion formation and cytoskeletal organization. Hydrogels greatly stimulated cell proliferation, particularly in low-serum medium, and partially inhibited myogenic differentiation.. On the whole, the results underline the potential of these genetically engineered polypeptides as a tool for dissecting crucial steps in myogenesis.

Topics: Animals; Cell Adhesion; Cell Differentiation; Cell Proliferation; Collagen Type IV; Elastin; Extracellular Matrix; Humans; Hydrogels; Mice; Myoblasts; Oligopeptides

Herein, we demonstrate a new approach for small-caliber vascular reconstruction using a non-porous elastin-like polypeptide hydrogel tubular scaffold, based on the concept of guided vascular regeneration (GVR). The scaffolds are composed of elastin-like polypeptide, (Val-Pro-Gly-Ile-Gly)

Topics: Animals; Blood Vessel Prosthesis; Blood Vessels; Cell Adhesion; Elastic Modulus; Elastin; Guided Tissue Regeneration; Human Umbilical Vein Endothelial Cells; Humans; Hydrogel, Polyethylene Glycol Dimethacrylate; Male; Materials Testing; Nanofibers; Oligopeptides; Peptides; Rats, Sprague-Dawley; Regeneration; Tissue Scaffolds

Tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) has been known as a promising agent for cancer therapy due to its specific apoptosis-inducing effect on tumor cells rather than most normal cells. However, systemically delivered TRAIL suffers from a rapid clearance from the body with an extremely short half-life. Thermally responsive elastin-like polypeptides (ELPs) are a promising class of temperature sensitive biopolymers based on the structural motif found in mammalian tropoelastin and retain the advantages of polymeric drug delivery systems. We therefore expressed RGD-TRAIL fused with ELP (RGD-TRAIL-ELP) in E. coli. Purification of RGD-TRAIL-ELP was achieved by the conveniently inverse transition cycling (ITC). The purified RGD-TRAIL-ELP without any chemical conjugation was able to self-assemble into nanoparticle under physiological condition. Non-reducing SDS-PAGE results showed that trimer content of RGD-TRAIL-ELP increased 3.4-fold than RGD-TRAIL. Flow cytometry confirmed that RGD-TRAIL-ELP 3-fold enhanced apoptosis-inducing capacity than RGD-TRAIL. Single intraperitoneal injection of the RGD-TRAIL-ELP nanoparticle induced nearly complete tumor regression in the COLO-205 tumor xenograft model. Histological observation confirmed that RGD-TRAIL-ELP induced significant tumor cell apoptosis without apparent liver toxicity. These findings suggested that a great potential application of the RGD-TRAIL-ELP nanoparticle system as a safe and efficient delivery strategy for cancer therapy.

Topics: Animals; Antineoplastic Agents; Apoptosis; Cell Line, Tumor; Elastin; Female; Humans; Mice; Mice, Nude; Nanoparticles; Neoplasms, Experimental; Oligopeptides; Recombinant Proteins; TNF-Related Apoptosis-Inducing Ligand

One crucial issue in stem cell therapy used for tissue repair is often the lack of selective carriers to deliver stem cells to the site of injury where the native extracellular matrix is pathologically damaged or lost. Therefore, it is necessary to develop a biomaterial that is permissive to stem cells and is suitable to replace injured or missing matrix. The major aim of this study is to investigate the potential of an RGD-containing elastin-like polypeptide (REP) with the structure TGPG[VGRGD(VGVPG)6]20WPC to engraft adipose stem cells (ASC) to full-thickness excisional wounds in mice. We implanted REP into the wound defects via body temperature-induced in situ aggregation. Engrafted REP exhibited a half-life of 2.6days in the wounds and did not elicit any pathological immune responses. REP itself significantly accelerated wound closure and reepithelialization and upregulated the expression of dermal tissue components. A combined administration of REP and ASC formed a hydrogel-like ASC/REP composite, which provided better neovascularization than the use of ASCs alone and increased the viability of transplanted ASC, improving overall wound healing. In vitro and in vivo mechanistic investigations suggested that REP enhances ASC survival at least in part via the Fak/Src adhesion-induced upregulation of Mek/Erk and PI3K/Akt survival pathways. We conclude that REP is a promising therapeutic agent for the improvement of stem cell-based therapy for enhanced tissue regeneration and repair.

Topics: Adipose Tissue; Animals; Cells, Cultured; Elastin; Integrins; Male; Mice, Inbred C57BL; Mice, Nude; Oligopeptides; Skin; Stem Cell Transplantation; Stem Cells; Wound Healing

The linker between the targeting moiety and the nanoparticle is often overlooked when engineering targeted drug delivery vehicles. We hypothesized that pH-triggered conformational changes of an elastin-like peptide (ELP) linker, with repeating VPGVG sequences, could alter the binding affinity of the well-established targeting moiety arginine-glycine-aspartic acid (RGD), which is known to enhance the delivery of nanoparticles to tumor cells via integrin overexpression. The pH change from blood (pH 7.4) to the tumor environment (pH 6) was used to elicit a conformational change in the ELP linker, as described by circular dichroism. Atomic force microscopy confirmed that RGD-ELP resulted in stronger adhesion to both MDA-MB-231 and HCC1806 breast cancer cells at pH 6 relative to pH 7.4. No change in adhesion force was measured as a function of pH for the non-neoplastic MCF-10A cell line and the nontargeting GDR-ELP peptide. This translated to significant binding and uptake of RGD-ELP modified liposomes at pH 6.0 relative to pH 7.4. These results indicate that the pH-triggered conformational structure of the ELP linker shifts RGD-mediated cancer cell targeting from non-active (pH 7.4) to active (pH 6). The reversible shift in ELP secondary structure may be used to engineer targeted drug delivery vehicles with tunable uptake.

Topics: Amino Acid Sequence; Cell Adhesion; Cell Line, Tumor; Elastin; Humans; Hydrogen-Ion Concentration; Integrin alpha5beta1; Integrin alphaVbeta3; Liposomes; Models, Molecular; Nanoparticles; Oligopeptides; Peptide Fragments; Protein Structure, Secondary; Protein Transport

To improve cardiovascular implant success, metal-based stents are designated to modulate endothelial cells adhesion and migration in order to prevent restenosis and late thrombosis diseases. Biomimetic coatings with extra-cellular matrix adhesive biomolecules onto stents surfaces are a strategy to recover a healthy endothelium. However, the appropriate bioactive sequences to selective promote growth of endothelium and the biomolecules surface immobilization strategy remains to be elucidated. In this study, biofunctionalization of cobalt chromium, CoCr, alloy surfaces with elastin-like recombinamers, ELR, genetically modified with an REDV sequence, was performed to enhance metal surfaces endothelialization. Moreover, physical adsorption and covalent bonding were used as biomolecules binding strategies onto CoCr alloy. Surfaces were activated with plasma and etched with sodium hydroxide previous to silanization with 3-chloropropyltriethoxysilane and functionalized with the ELR. CoCr alloy surfaces were successfully biofunctionalized and the use of an ELR with an REDV sequence, allows conferring bioactivity to the biomaterials surface, demonstrating a higher cell adhesion and spreading of HUVEC cells on the different CoCr surfaces. This effect is emphasized as increases the amount of immobilized biomolecules and directly related to the immobilization technique, covalent bonding, and the increase of surface charge electronegativity. Our strategy of REDV elastin-like recombinamers immobilization onto CoCr alloy surfaces via covalent bonding through organosilanes provides a bioactive surface that promotes endothelial cell adhesion and spreading.

Topics: Adsorption; Amino Acid Sequence; Cardiovascular System; Cell Adhesion; Cell Proliferation; Chromium Alloys; Elastin; Endothelium; Fluorescein-5-isothiocyanate; Fluorescence; Human Umbilical Vein Endothelial Cells; Humans; Isoelectric Point; Microscopy, Atomic Force; Oligopeptides; Photoelectron Spectroscopy; Static Electricity; Thermodynamics; Wettability

The aim of this study was to investigate the use of bioactive RGD-containing elastin-like recombinamers (ELR-RGDs) as a substrate that can maintain human retinal pigment epithelial cell (hRPE) phenotype and growth pattern. Results obtained are compared with previously published behavior of ARPE19 cells. The extension of these results to hRPE is required because ARPE19 cells cannot be used clinically to treat age-related macular degeneration. hRPE cells were isolated, cultured, seeded, and grown on surface of glass, treated polystyrene (TCP), and solvent-cast ELR-RGD and ELR-IK film with no specific sequence. Cells were analyzed to study cell adhesion, proliferation, morphology, and RPE65 protein expression by staining with diamidino-2-phenylindole, Rhodamine-Phalloidin, and anti-RPE65 antibody at 12, 24, 72, 120, 168, and 360 h. hRPE cells always grew better on ELR-RGD than on glass and ELR-IK but not on TCP. The kinetic hRPE growth curves confirmed that growth differences started to appear at 24 h for these surfaces in ascending order of cell growths, namely glass, ELR-IK, ELR-RGD, and TCP. There was a clear difference at 360 h. ELR-RGD maintained hRPE cells stable morphology and RPE65 protein expression. ELR-RGD seems to be a good substrate for growing hRPE cells with stable morphology and RPE65 protein expression. As such, this work confirms our hypothesis regarding ELR-RGD substrates viability, which can be used as a Bruch's membrane prosthesis for further studies in animals. However, these results must subsequently be extrapolated to use of hRPE cells in animals to evaluate them as a transplantation vehicle in human.

Topics: Amino Acid Sequence; Biocompatible Materials; Cell Proliferation; Cells, Cultured; cis-trans-Isomerases; Elastin; Humans; Molecular Sequence Data; Oligopeptides; Retinal Pigment Epithelium

β-type titanium alloys with low Young's modulus are desirable to reduce stress shielding effect and enhance bone remodeling for implants used to substitute failed hard tissue. For biomaterials application, the surface bioactivity is necessary to achieve optimal osseointegration. In the previous work, the low elastic modulus (43 GPa) Ti-25Nb-16Hf (wt %) alloy was mechanically and microstructurally characterized. In the present work, the biological behavior of Ti-25Nb-16Hf was studied. The biological response was improved by surface modification. The metal surface was modified by oxygen plasma and subsequently silanized with 3-chloropropyl(triethoxy)silane for covalent immobilization of the elastin-like polymer. The elastin-like polymer employed exhibits RGD bioactive motives inspired to the extracellular matrix in order to improve cell adhesion and spreading. Upon modification, the achieved surface presented different physical and chemical properties, such as surface energy and chemical composition. Subsequently, osteoblast adhesion, cell numbers, and differentiation studies were performed to correlate surface properties and cell response. The general tendency was that the higher surface energy the higher cell adhesion. Furthermore, cell culture and immunofluorescence microscopy images demonstrated that RGD-modified surfaces improved adhesion and spreading of the osteoblast cell type.

Topics: Alloys; Cell Adhesion; Cell Line; Coated Materials, Biocompatible; Elastic Modulus; Elastin; Humans; Materials Testing; Oligopeptides; Osteoblasts; Polymers

The design of bioactive materials allows tailored studies probing cell-biomaterial interactions, however, relatively few studies have examined the effects of ligand density and material stiffness on neurite growth in three-dimensions. Elastin-like proteins (ELPs) have been designed with modular bioactive and structural regions to enable the systematic characterization of design parameters within three-dimensional (3-D) materials. To promote neurite out-growth and better understand the effects of common biomaterial design parameters on neuronal cultures we here focused on the cell-adhesive ligand density and hydrogel stiffness as design variables for ELP hydrogels. With the inherent design freedom of engineered proteins these 3-D ELP hydrogels enabled decoupled investigations into the effects of biomechanics and biochemistry on neurite out-growth from dorsal root ganglia. Increasing the cell-adhesive RGD ligand density from 0 to 1.9×10(7)ligands μm(-3) led to a significant increase in the rate, length, and density of neurite out-growth, as quantified by a high throughput algorithm developed for dense neurite analysis. An approximately two-fold improvement in total neurite out-growth was observed in materials with the higher ligand density at all time points up to 7 days. ELP hydrogels with initial elastic moduli of 0.5, 1.5, or 2.1kPa and identical RGD ligand densities revealed that the most compliant materials led to the greatest out-growth, with some neurites extending over 1800μm by day 7. Given the ability of ELP hydrogels to efficiently promote neurite out-growth within defined and tunable 3-D microenvironments these materials may be useful in developing therapeutic nerve guides and the further study of basic neuron-biomaterial interactions.

Topics: Amino Acid Sequence; Animals; Cell Adhesion; Cell Proliferation; Cell Survival; Chickens; Elastic Modulus; Elastin; Ganglia, Spinal; Hydrogels; Ligands; Molecular Sequence Data; Neurites; Oligopeptides; Protein Engineering

Extracellular matrix (ECM) plays an important role in controlling the β-cell morphology, survival and insulin secretary functions. An RGD-modified elastin-like polypeptide (RGD-ELP), TGPG[VGRGD(VGVPG)(6)](20)WPC, has been reported previously as a bioactive matrix. In this study, to investigate whether RGD-ELP affects β-cell growth characteristics and insulin secretion, β-TC6 cells were cultured on the RGD-ELP coatings prepared via thermally induced phase transition. On RGD-ELP, β-TC6 cells clustered into an islet-like architecture with high cell viability. Throughout 7days' culture, the proliferation rate of the cells within a pseudoislet was similar to that of monolayer culture. Under high glucose (25mM), β-TC6 pseudoislets showed up-regulated insulin gene expression and exhibited glucose-stimulated insulin secretion. Importantly, the mRNA and protein abundances of cell adhesion molecules (CAM) E-cadherin and connexin-36 were much higher in pseudoislets than in monolayer cells. The siRNA-mediated inhibition of E-cadherin or connexin-36 expression severely limited pseudoislet formation. In addition, the mRNA levels of collagen types I and IV, fibronectin and laminin were significantly elevated in pseudoislets. The results suggest that RGD-ELP promotes pseudoislet formation via up-regulation of the CAM and ECM components. The functional roles of RGD-ELP are discussed in respect of its molecular composition.

Topics: Animals; Cadherins; Cell Adhesion Molecules; Cell Proliferation; Cell Shape; Cell Survival; Collagen; Connexins; Elastin; Extracellular Matrix Proteins; Fibronectins; Gap Junction delta-2 Protein; Gene Expression Regulation; Insulin; Insulin Secretion; Islets of Langerhans; Laminin; Mice; Oligopeptides; RNA, Messenger; RNA, Small Interfering; Spheroids, Cellular; Transition Temperature; Up-Regulation

Topics: Amino Acid Sequence; Animals; Biocompatible Materials; Biomimetic Materials; Cell Adhesion; Cross-Linking Reagents; Elastic Modulus; Elastin; Electrochemistry; Extracellular Matrix; Humans; Materials Testing; Molecular Sequence Data; Oligopeptides; Protein Engineering; Rotation

Recombinant elastin-like protein (ELP) polymers display several favorable characteristics for tissue repair and replacement as well as drug delivery applications. However, these materials are derived from peptide sequences that do not lend themselves to cell adhesion, migration, or proliferation. This report describes the chemoselective ligation of peptide linkers bearing the bioactive RGD sequence to the surface of ELP hydrogels. Initially, cystamine is conjugated to ELP, followed by the temperature-driven formation of elastomeric ELP hydrogels. Cystamine reduction produces reactive thiols that are coupled to the RGD peptide linker via a terminal maleimide group. Investigations into the behavior of endothelial cells and mesenchymal stem cells on the RGD-modified ELP hydrogel surface reveal significantly enhanced attachment, spreading, migration and proliferation. Attached endothelial cells display a quiescent phenotype.

Topics: Amino Acid Sequence; Animals; Biocompatible Materials; Cell Adhesion; Cell Movement; Cell Proliferation; Cells, Cultured; Elastin; Human Umbilical Vein Endothelial Cells; Humans; Hydrogel, Polyethylene Glycol Dimethacrylate; Maleimides; Mesenchymal Stem Cells; Microscopy, Confocal; Molecular Sequence Data; Oligopeptides; Peptides; Sulfhydryl Compounds; Sus scrofa

The human fibulin family consists of seven complex extracellular glycoproteins originally characterized as components of elastic fibers in connective tissue. However, beyond its structural role, fibulins are involved in complex biological processes such as cell adhesion, migration or proliferation. Indeed, they have proved to be essential elements in normal physiology, as shown by mouse models lacking these proteins, that evidence several developmental abnormalities and pathological features. Their relevance is also apparent in tumorigenesis, an aspect that has started to be intensely studied. Distinct fibulins are expressed in both tumor and stromal cells and are subjected to multiple expression regulations with either anti or pro-tumor effects. The mechanistic insights that underlie these observations are now commencing to emerge, portraying these proteins as very versatile and active constituents of connective tissue. The aim of this review is to highlight the most relevant connections between fibulins and cancer.

Topics: ADAM Proteins; ADAMTS1 Protein; Animals; Calcium-Binding Proteins; Cell Transformation, Neoplastic; Elastic Tissue; Elastin; Extracellular Matrix; Extracellular Matrix Proteins; Gene Silencing; Humans; Mice; Mice, Knockout; Microfibrils; Neoplasm Proteins; Neoplasms; Oligopeptides; Protein Isoforms

Integrin-mediated interaction of neuronal cells with extracellular matrix (ECM) is important for the control of cell adhesion, morphology, motility, and differentiation in both in vitro and in vivo systems. Arg-Gly-Asp (RGD) sequence is one of the most potent integrin-binding ligand found in many native ECM proteins. An elastin-mimetic recombinant protein, TGPG[VGRGD(VGVPG)6]20WPC, referred to as [RGD-V6]20, contains multiple RGD motifs to bind cell-surface integrins. This study aimed to investigate how surface-adsorbed recombinant protein can be used to modulate the behaviors and differentiation of neuronal cells in vitro. For this purpose, biomimetic ECM surfaces were prepared by isothermal adsorption of [RGD-V6]20 onto the tissue culture polystyrene (TCPS), and the effects of protein-coated surfaces on neuronal cell adhesion, spreading, migration, and differentiation were quantitatively measured using N2a neuroblastoma cells.. The [RGD-V6]20 was expressed in E. coli and purified by thermally-induced phase transition. N2a cell attachment to either [RGD-V6]20 or fibronectin followed hyperbolic binding kinetics saturating around 2 μM protein concentration. The apparent maximum cell binding to [RGD-V6]20 was approximately 96% of fibronectin, with half-maximal adhesion on [RGD-V6]20 and fibronectin occurring at a coating concentration of 2.4 × 10-7 and 1.4 × 10-7 M, respectively. The percentage of spreading cells was in the following order of proteins: fibronectin (84.3% ± 6.9%) > [RGD-V6]20 (42.9% ± 6.5%) > [V7]20 (15.5% ± 3.2%) > TCPS (less than 10%). The migration speed of N2a cells on [RGD-V6]20 was similar to that of cells on fibronectin. The expression of neuronal marker proteins Tuj1, MAP2, and GFAP was approximately 1.5-fold up-regulated by [RGD-V6]20 relative to TCPS. Moreover, by the presence of both [RGD-V6]20 and RA, the expression levels of NSE, TuJ1, NF68, MAP2, and GFAP were significantly elevated.. We have shown that an elastin-mimetic protein consisting of alternating tropoelastin structural domains and cell-binding RGD motifs is able to stimulate neuronal cell behaviors and differentiation. In particular, adhesion-induced neural differentiation is highly desirable for neural development and nerve repair. In this context, our data emphasize that the combination of biomimetically engineered recombinant protein and isothermal adsorption approach allows for the facile preparation of bioactive matrix or coating for neural tissue regeneration.

Topics: Adsorption; Animals; Biomimetic Materials; Cell Adhesion; Cell Differentiation; Cell Line, Tumor; Cell Movement; Elastin; Escherichia coli; Fibronectins; Mice; Neurons; Oligopeptides; Polystyrenes; Recombinant Proteins

The aim of this study is to investigate the use of elastin-like recombinamers (ELRs) as a substrate that can maintain the growth, phenotype, and functional characteristics of retinal pigment epithelial (RPE) cells efficiently and as a suitable carrier for the transplantation of autologous RPE cells for treatment of age-related macular degeneration (AMD). ELR films containing a bioactive sequence, RGD (ELR-RGD), and one with no specific sequence (ELR-IK) as control, were obtained by solvent-casting onto glass and subsequent cross-linking. ARPE19 cells were seeded on sterilized ELR films as well as on the control surfaces. Cells were analysed after 4, 24, 72, and 120 h to study cell adhesion, proliferation, cell viability, morphology, and specificity by staining with Trypan blue, DAPI, Rhodamin-Phalloidin and RPE65, ZO-1 antibodies and observing under fluorescence as well as electron microscope. ARPE19 cells seeded on both ELR films and controls were 100% viable and maintained their morphology and set of characteristics at the different time points studied. Cell proliferation on ELR-RGD was significantly higher than that found on ELR-IK at all time points, although it was less than the growth rate on polystyrene. ARPE19 cells grow well on ELR-RGD maintaining their phenotype. These results should be extended to further studies with fresh human RPE cells and in vivo studies to determine whether this ELR-RGD matrix could be used as a Bruch's membrane prosthesis and carrier for transplantation of RPE cells in patients suffering with AMD.

Topics: Amino Acid Sequence; Carrier Proteins; Cell Adhesion; Cell Line; Cell Proliferation; cis-trans-Isomerases; Elastin; Epithelial Cells; Eye Proteins; Gene Expression; Humans; Macular Degeneration; Molecular Sequence Data; Oligopeptides; Regeneration; Retinal Pigment Epithelium; Tissue Scaffolds

Transfection arrays are useful to analyze multiple genes at one time. In order to carry out gene transfection, cells are cultured on a plate on which genes are spotted to make extracellular matrix. However, this method is limited by low cell adhesion and transfection efficiency. To overcome these problems, we attempted to construct a novel extracellular matrix protein consisting of a variety of functional peptides. Here we fused the elastin derived peptide Ala-Pro-Gly-Val-Gly-Val (APGVGV) with the cell adhesive peptides, Pro-His-Ser-Arg-Asn (PHSRN) and Arg-Gly-Asp (RGD). The resulting fusion proteins, E12PSGR, had high cell adhesive activity, transfection efficiency, and thermal stability.

Topics: Animals; Cell Adhesion; Cell Line; Elastin; Escherichia coli; Extracellular Matrix Proteins; Fibronectins; Hot Temperature; Mice; Oligopeptides; Peptide Fragments; Protein Stability; Recombinant Fusion Proteins; Transfection

The development of different techniques based on natural and polymeric scaffolds are useful for the design of different biomimetic materials. These approaches, however, require supplementary steps for the chemical or physical modification of the biomaterial. To avoid such steps, in the present study, we constructed a new multifunctional protein that can be easily immobilized onto hydrophobic surfaces, and at the same time helps enhance specific cell adhesion and proliferation onto collagen substrates. A collagen binding domain was fused to a previously constructed protein, which had an epidermal growth factor fused to a hydrophobic peptide that allows for cell adhesion. The new fusion protein, designated fnCBD-ERE-EGF is produced in Escherichia coli, and its abilities to bind to collagen and promote cell proliferation were investigated. fnCBD-ERE-EGF was shown to keep both collagen binding and cell growth-promoting activities comparable to those of the corresponding unfused proteins. The results obtained in this study also suggest the use of a fnCBD-ERE-EGF as an alternative for the design of multifunctional ECM-bound growth factor based materials.

Topics: Biomimetic Materials; Cell Adhesion; Cell Line; Cell Proliferation; Collagen; Elastin; Epidermal Growth Factor; Escherichia coli; Humans; Hydrophobic and Hydrophilic Interactions; Immobilized Proteins; Models, Molecular; Oligopeptides; Recombinant Fusion Proteins; Tissue Engineering

Elastin-like peptides (ELPs) sequences are repeats of the pentapeptide GVGVP, and they have the ability to coaggregate reversibly, depending on the temperature. By exploiting this characteristic, a novel extracellular matrix protein (ECM) containing ELP was developed genetically to harvest a cell sheet from a culture dish. One of the ELP constructs, G288, consisted of 288 repeats of the sequence GVGVGP (G); it was attached to a hydrophobic dish surface. Next, cells with the sequence His-G36RG36, which has a His tag and an RGD sequence (R) that promotes attachment of the cell between the G36 sequences, consisted of 36 repeats of the sequence GVGVP, were added to the dish. After these cells became confluent, the temperature was changed to 20 degrees C in order to reverse the coaggregation. At this temperature, cells could be detached from the dish as a cell sheet. This genetically engineering method for construction of thermoresponsive ECM would be suitable to modify ECM with further functional domains.

Topics: Base Sequence; Biocompatible Materials; Cell Adhesion; Cell Line, Tumor; Culture Media; Elastin; Extracellular Matrix; Genetic Engineering; Humans; Molecular Sequence Data; Oligopeptides; Plasmids; Protein Engineering; Proteins; Temperature

An elastin-mimetic polypeptide, (EMM)(7), with the amino-acid sequence GRDPSS [VPGVG VPGKG VPGVG VPGVG VPGEG VPGIG](7) was used for chemical conjugation of various integrin ligands (RGD peptides) to prepare bioactive hydrogels. The chemical approach involved (1) chemical protection of lysine residues with Fmoc or Boc groups, (2) chemical ligation of a protected linear or cyclic RGD ligand, with or without a hexanoic-acid spacer to the glutamic acid residue, (3) deprotection of the lysine functionalities and the RGD moieties and (4) cross-linking to form a bioactive hydrogel. (1)H NMR spectroscopy was used to quantify the multiple steps in the reaction. The chemical protection was found to be between 65 and 93% for Fmoc and Boc, respectively. The ligands studied included linear RGD cell-binding [H-FGRGDS-OH (1-l-RGD), H-Ahx--FGRGDS-OH (2-Ahx-FGRGDS) and a cyclic -H(2)N-(CH(2))(6)COHN-cyclo(-RGDfK-) (H-Ahx-c(-RGDfK-)) peptide also with a hexanoic-acid spacer. Cell adhesion with mouse osteoblast cells was dependent on the ligand type, ligand density and the use of a spacer.

Topics: Animals; Biomimetic Materials; Cell Adhesion; Cell Line; Cross-Linking Reagents; Elastin; Hydrogels; Magnetic Resonance Spectroscopy; Mice; Oligopeptides; Osteoblasts; Peptides; Recombinant Proteins

Extracellular elastic fibres provide mechanical elasticity to tissues and contribute towards the processes of organ remodelling by affecting cell-cell signalling. The formation of elastic fibres requires the assembly and crosslinking of tropoelastin monomers, and organization of the resulting insoluble elastin matrix into functional fibres. The molecules and mechanisms involved in this process are unknown. Fibulin-5 (also known as EVEC/DANCE) is an extracellular matrix protein abundantly expressed in great vessels and cardiac valves during embryogenesis, and in many adult tissues including the aorta, lung, uterus and skin, all of which contain abundant elastic fibres. Here we show that fibulin-5 is a calcium-dependent, elastin-binding protein that localizes to the surface of elastic fibres in vivo. fibulin-5-/- mice develop marked elastinopathy owing to the disorganization of elastic fibres, with resulting loose skin, vascular abnormalities and emphysematous lung. This phenotype, which resembles the cutis laxa syndrome in humans, reveals a critical function for fibulin-5 as a scaffold protein that organizes and links elastic fibres to cells. This function may be mediated by the RGD motif in fibulin-5, which binds to cell surface integrins, and the Ca2+-binding epidermal growth factor (EGF) repeats, which bind elastin.

Topics: Amino Acid Sequence; Animals; Aorta; Elastic Tissue; Elastin; Extracellular Matrix Proteins; Gene Targeting; Lung; Male; Mice; Molecular Sequence Data; Oligopeptides; Protein Binding; Recombinant Proteins

Altered vascular mechanics resulting from changes in collagen and integrins may influence resistance artery structure and function and, therefore, peripheral resistance and blood pressure in spontaneously hypertensive rats (SHR).. Effects of age, angiotensin-converting enzyme inhibition (fosinopril, 10 to 30 mg/kg per day), and AT(1)-receptor antagonism (irbesartan, 50 mg/kg per day) on vascular structure, mechanics, and composition were assessed in SHR. Systolic blood pressure was elevated in young SHR (130+/-2 mm Hg) compared with Wistar-Kyoto (WKY) rats (106+/-2 mm Hg). In adult SHR, the rise in systolic blood pressure (44+/-3 mm Hg) was blunted by fosinopril (18+/-1 mm Hg) and irbesartan (9+/-3 mm Hg). Lumen diameter of mesenteric resistance arteries was smaller and media/lumen ratio was greater in young and adult SHR versus WKY rats. Growth index was 24% in untreated adult SHR versus WKY rats; these values were -35% for fosinopril-treated and -29% for irbesartan-treated SHR versus untreated SHR. Isobaric wall stiffness was normal despite increased stiffness of wall components in adult SHR vessels. Irbesartan partially prevented stiffening of wall components in SHR. The collagen/elastin ratio was greater in adult SHR vessels (6.5+/-1.3) than in WKY (3.2+/-0.4) vessels. Expression of alpha(v)beta(3) and alpha(5)beta(1) integrins was increased in SHR aged 20 versus 6 weeks. Expression of alpha(5)beta(1) integrins was lower in young SHR, and alpha(v)beta(3) integrins were overexpressed in adult SHR versus WKY rats. Irbesartan and fosinopril attenuated differences in the collagen/elastin ratio and integrin expression.. Wall components of mesenteric resistance arteries stiffen with age in SHR. Interrupting the renin-angiotensin system has normalizing effects on integrin expression and composition, stiffness, and growth of the arterial wall.

Topics: Angiotensin Receptor Antagonists; Angiotensin-Converting Enzyme Inhibitors; Animals; Biphenyl Compounds; Blood Pressure; Body Weight; Collagen; Elastin; Fosinopril; Hypertension; Integrins; Irbesartan; Male; Mesenteric Arteries; Oligopeptides; Rats; Rats, Inbred SHR; Rats, Inbred WKY; Receptor, Angiotensin, Type 1; Receptor, Angiotensin, Type 2; Tetrazoles; Vascular Resistance