cufe2o4 and peroxymonosulfate

cufe2o4 has been researched along with peroxymonosulfate* in 3 studies

Other Studies

3 other study(ies) available for cufe2o4 and peroxymonosulfate

ArticleYear
Sulfate Radical-Mediated Degradation of Sulfadiazine by CuFeO2 Rhombohedral Crystal-Catalyzed Peroxymonosulfate: Synergistic Effects and Mechanisms.
    Environmental science & technology, 2016, Mar-15, Volume: 50, Issue:6

    Copper-iron bimetallic oxides have shown great potential for powerful radical production by activating peroxides. In this work, CuFeO2 rhombohedral crystals (RCs) were synthesized and used as heterogeneous catalysts for peroxymonosulfate (PMS) activation under various conditions. Sulfadiazine, a widely used veterinary sulfonamide, was used as a target pollutant to evaluate the efficiency of this combination. The results showed that of all the catalysts tested, the CuFeO2 RCs had the greatest reactivity. Under conditions of 0.1 g L(-1) CuFeO2 RCs and 33.0 μM PMS, the nearly complete degradation of sulfadiazine occurred within 24 min. A synergistic catalytic effect was found between solid Cu(I) and Fe(III), probably due to the accelerated reduction of Fe(III). The two activation stages that produced different radicals (hydroxyl radicals followed by sulfate radicals) existed when solid Cu(I) was used as the catalyst. The CuFeO2 RCs had a higher PMS utilization efficiency than CuFe2O4, probably because the Cu(I)-promoted reduction of solid Fe(III). A total of 10 products were identified, and their evolution was explored. On the basis of the evidence of oxidative product formation, we proposed four possible pathways of sulfadiazine degradation.

    Topics: Catalysis; Copper; Ferrous Compounds; Hydroxyl Radical; Oxidation-Reduction; Peroxides; Sulfadiazine; Sulfates; Water Pollutants, Chemical

2016
Efficient degradation of carbamazepine by easily recyclable microscaled CuFeO2 mediated heterogeneous activation of peroxymonosulfate.
    Journal of hazardous materials, 2016, Nov-05, Volume: 317

    Microscaled CuFeO2 particles (micro-CuFeO2) were rapidly prepared via a microwave-assisted hydrothermal method and characterized by scanning electron microscopy, X-ray powder diffraction and X-ray photoelectron spectroscopy. It was found that the micro-CuFeO2 was of pure phase and a rhombohedral structure with size in the range of 2.8±0.6μm. The micro-CuFeO2 efficiently catalyzed the activation of peroxymonosulfate (PMS) to generate sulfate radicals (SO4-), causing the fast degradation of carbamazepine (CBZ). The catalytic activity of micro-CuFeO2 was observed to be 6.9 and 25.3 times that of micro-Cu2O and micro-Fe2O3, respectively. The enhanced activity of micro-CuFeO2 for the activation of PMS was confirmed to be attributed to synergistic effect of surface bonded Cu(I) and Fe(III). Sulfate radical was the primary radical species responsible for the CBZ degradation. As a microscaled catalyst, micro-CuFeO2 can be easily recovered by gravity settlement and exhibited improved catalytic stability compared with micro-Cu2O during five successive degradation cycles. Oxidative degradation of CBZ by the couple of PMS/CuFeO2 was effective in the studied actual aqueous environmental systems.

    Topics: Carbamazepine; Catalysis; Copper; Ferrous Compounds; Particle Size; Peroxides; Recycling; Surface Properties; Water Pollutants, Chemical; Water Purification

2016
Production of sulfate radical from peroxymonosulfate induced by a magnetically separable CuFe2O4 spinel in water: efficiency, stability, and mechanism.
    Environmental science & technology, 2013, Mar-19, Volume: 47, Issue:6

    A simple, nonhazardous, efficient and low energy-consuming process is desirable to generate powerful radicals from peroxymonosulfate (PMS) for recalcitrant pollutant removal. In this work, the production of radical species from PMS induced by a magnetic CuFe(2)O(4) spinel was studied. Iopromide, a recalcitrant model pollutant, was used to investigate the efficiency of this process. CuFe(2)O(4) showed higher activity and 30 times lower Cu(2+) leaching (1.5 μg L(-1) per 100 mg L(-1)) than a well-crystallized CuO at the same dosage. CuFe(2)O(4) maintained its activity and crystallinity during repeated batch experiments. In comparison, the activity of CuO declined significantly, which was ascribed to the deterioration in its degree of crystallinity. The efficiency of the PMS/CuFe(2)O(4) was highest at neutral pH and decreased at acidic and alkaline pHs. Sulfate radical was the primary radical species responsible for the iopromide degradation. On the basis of the stoichiometry of oxalate degradation in the PMS/CuFe(2)O(4), the radical production yield from PMS was determined to be near 1 mol/mol. The PMS decomposition involved an inner-sphere complexation with the oxide's surface Cu(II) sites. In situ characterization of the oxide surface with ATR-FTIR and Raman during the PMS decomposition suggested that surface Cu(II)-Cu(III)-Cu(II) redox cycle was responsible for the efficient sulfate radical generation from PMS.

    Topics: Aluminum Oxide; Copper; Ferrous Compounds; Hydrogen-Ion Concentration; Magnesium Oxide; Magnetics; Oxidation-Reduction; Peroxides; Sulfates; Water; Water Pollutants, Chemical; Water Purification

2013