clay and aluminum-magnesium-silicate

The design and development of nanomaterials capable of penetrate cancer cells is fundamental when anticancer therapy is involved. The use of collagenase (Col) is useful since this enzyme can degrade collagen, mainly present in the tumor extracellular matrix. However, its use is often limited since collagenase suffers from inactivation and short half-life. Use of recombinant ultrapure collagenase or carrier systems for their delivery are among the strategies adopted to increase the enzyme stability. Herein, based on the more stability showed by recombinant enzymes and the possibility to use them in anticancer therapy, we propose a novel strategy to further increase their stability by using halloysite nanotubes (HNTs) as carrier. ColG and ColH were supramolecularly loaded onto HNTs and used as fillers for Veegum gels. The systems could be used for potential local administration of collagenases for solid tumor treatment. All techniques adopted for characterization showed that halloysite interacts with collagenases in different ways depending with the Col considered. Furthermore, the hydrogels showed a very slow release of the collagenases within 24 h. Finally, biological assays were performed by studying the digestion of a type-I collagen matrix highlighting that once released the Col still possessed some activity. Thus we developed carrier systems that could further increase the high recombinant collagenases stability, preventing their inactivation in future in vivo applications for potential local tumor treatment.

Topics: Clay; Collagenases; Excipients; Hydrogels; Minerals

SARS-CoV-2 enters the intestine by the spike protein binding to angiotensin-converting enzyme 2 (ACE2) receptors in enterocyte apical membranes, leading to diarrhea in some patients. Early treatment of COVID-19-associated diarrhea could relieve symptoms and limit viral spread within the gastrointestinal (GI) tract. Diosmectite, an aluminomagnesium silicate adsorbent clay with antidiarrheal effects, is recommended in some COVID-19 management protocols. In rotavirus models, diosmectite prevents pathogenic effects by binding the virus and its enterotoxin. We tested the trapping and anti-inflammatory properties of diosmectite in a SARS-CoV-2 model. Trapping effects were tested in Caco-2 cells using spike protein receptor-binding domain (RBD) and heat-inactivated SARS-CoV-2 preparations. Trapping was assessed by immunofluorescence, alone or in the presence of cells. The effect of diosmectite on nuclear factor kappa B (NF-kappaB) activation and CXCL10 secretion induced by the spike protein RBD and heat-inactivated SARS-CoV-2 were analyzed by Western blot and ELISA, respectively. Diosmectite bound the spike protein RBD and SARS-CoV-2 preparation, and inhibited interaction of the spike protein RBD with ACE2 receptors on the Caco-2 cell surface. Diosmectite exposure also inhibited NF-kappaB activation and CXCL10 secretion. These data provide direct evidence that diosmectite can bind SARS-CoV-2 components and inhibit downstream inflammation, supporting a mechanistic rationale for consideration of diosmectite as a management option for COVID-19-associated diarrhea.

Topics: Adsorption; Aluminum Compounds; Angiotensin-Converting Enzyme 2; Anti-Inflammatory Agents; Binding Sites; Caco-2 Cells; Chemokine CXCL10; Chromatography, Liquid; Clay; COVID-19 Drug Treatment; Diarrhea; Enterocytes; Gastroenterology; Humans; Magnesium Compounds; Mass Spectrometry; Molecular Docking Simulation; Molecular Dynamics Simulation; NF-kappa B p50 Subunit; Protein Binding; Protein Domains; Rotavirus; SARS-CoV-2; Silicates

Studying complexation between a wide variety of drugs and clay is of high importance in expanding the knowledge about controlled drug delivery and its exploitation. This study reports the use of isothermal calorimetry (ITC) in understanding the complexation process occurring between magnesium aluminium silicate (MAS) and metformin hydrochloride (MET), as a potentially controlled release drug delivery system.. To fully characterise and understand the complexes formed between MAS and MET and how that might impact on controlled release systems.. MAS and MET complex dispersions and particles were formulated and analysed using ITC, DSC, XRPD, ATR-FTIR, SEM/EDX, digital microscopy and 2D-SAXS.. The calorimetric results confirmed the binding between MET and MAS at various pHs (5, 7 and 9) and temperatures (25 ºC and 37 ºC). The overall change in enthalpy was found to be exothermic with a comparatively small entropic contribution to the total change in Gibbs free energy, implying that the binding was an enthalpically driven process. These findings suggest that the binding process was dominated by hydrogen bonding and electrostatic interactions. pH and temperature variation did not have a great impact on the binding, as observed from the similarity in enthalpy (ΔH), entropy (ΔS) or Gibbs free energy (ΔG), with the reaction being only slightly more exothermic at pH 5 and at 37 ºC. 2D-SAXS was able to differentiate between MAS particulates and MAS-MET complexes when analysed in their liquid form suggesting the importance of appropriate methodology and instrumentation used in characterisation.. ITC was successfully used in understanding the complexation process occurring between MAS and MET. Care and consideration however should thus be taken in the accurate determination and characterisation techniques for the formation of complexes for controlled release using MAS.

Topics: Aluminum Compounds; Calorimetry; Clay; Magnesium; Magnesium Compounds; Metformin; Pharmaceutical Preparations; Scattering, Small Angle; Silicates; Thermodynamics; X-Ray Diffraction

Obesity is a rapidly growing epidemic, with over one-third of the global population classified as overweight or obese. Consequently, an urgent need exists to develop innovative approaches and technologies that regulate energy uptake, to curb the rising trend in obesity statistics. In this study, nanostructured clay (NSC) particles, fabricated by spray drying delaminated dispersions technologies that regulate energy uptake, to curb the rising trend in obesity statistics. In this study, nanostructured clay (NSC) particles, fabricated by spray drying delaminated dispersions of commercial clay platelets (Veegum® HS and LAPONITE® XLG), were delivered as complimentary, bioactive excipients with the potent lipase inhibitor, orlistat, for the inhibition of fat (lipid) hydrolysis. Simulated intestinal lipolysis studies were performed by observing changes in free fatty acid concentration and revealed that a combinatorial effect existed when NSC particles were co-administered with orlistat, as evidenced by a 1.2- to 1.6-fold greater inhibitory response over 60 min, compared to dosing orlistat alone. Subsequently, it was determined that a multifaceted approach to lipolysis inhibition was presented, whereby NSC particles adsorbed high degrees of lipid (up to 80% of all lipid species present in lipolysis media) and thus physically shielded the lipid-in-water interface from lipase access, while orlistat covalently attached and blocked the lipase enzyme active site. Thus, the ability for NSC particles to enhance the biopharmaceutical performance and potency of orlistat is hypothesised to translate into promising in vivo pharmacodynamics, where this novel approach is predicted to lead to considerably greater weight reductions for obese patients, compared to dosing orlistat alone.

Topics: Aluminum Compounds; Anti-Obesity Agents; Clay; Dietary Supplements; Digestion; Fatty Acids; Humans; Hydrolysis; Intestinal Absorption; Lipase; Lipids; Lipolysis; Magnesium Compounds; Nanoparticles; Obesity; Orlistat; Particle Size; Silicates; Surface Properties

This work studied the influence of "maturation" conditions (time and agitation) on aggregation states, gel structure and rheological behaviour of a special kind of pharmaceutical semisolid products made of concentrated clay suspensions in mineral medicinal water. Maturation of the samples was carried out in distilled and sulphated mineral medicinal water, both in static conditions (without agitation) and with manual stirring once a week, during a maximum period of three months. At the measured pH interval (7.5-8.0), three-dimensional band-type networks resulting from face/face contacts were predominant in the laminar (disc-like) clay suspensions, whereas the fibrous (rod-like) particles formed micro-aggregates by van der Waals attractions. The high concentration of solids in the studied systems greatly determined their behaviour. Rod-like sepiolite particles tend to align the major axis in aggregates promoted by low shearing maturation, whereas aggregates of disc-like smectite particles did not have a preferential orientation and their complete swelling required long maturation time, being independent of stirring. Maturation of both kinds of suspensions resulted in improved rheological properties. Laminar clay suspensions became more structured with time, independently from static or dynamic maturation conditions, whereas for fibrous clay periodic agitation was also required. Rheological properties of the studied systems have been related to aggregation states and networking mechanisms, depending on the type of clay minerals constituents. Physical stability of the suspensions was not impaired by the specific composition of the Graena medicinal water.

Topics: Aluminum Compounds; Aluminum Silicates; Clay; Hydrogen-Ion Concentration; Magnesium Compounds; Magnesium Silicates; Mineral Waters; Particle Size; Rheology; Silicates; Suspensions; Viscosity; Water

The aim of this study was to investigate the impact of the addition of magnesium aluminum silicate (MAS), a natural clay, on the properties of polymeric films based on quaternary polymethacrylates (QPMs). Two commercially available aqueous QPM dispersions were studied: Eudragit(®) RS 30D and Eudragit(®) RL 30D (the dry copolymers containing 5 and 10% quaternary ammonium groups, respectively). The composite QPM-MAS films were prepared by casting. Importantly, QPM interacted with MAS and formed small flocculates prior to film formation. Continuous films were obtained up to MAS contents of 19% (referred to the QPM dry mass). ATR-FTIR and PXRD revealed that the positively charged quaternary ammonium groups of QPM interacted with negatively charged SiO(-) groups of MAS, creating nanocomposite materials. This interaction led to improved thermal stability of the composite films. The puncture strength and elongation at break of dry systems decreased with increasing MAS content. In contrast, the puncture strength of the wet QPM-MAS films (upon exposure to acidic or neutral media) increased with increasing MAS content. Furthermore, incorporation of MAS into QPM films significantly decreased the latter's tackiness in the dry and wet state. These findings suggest that nanocomposite formation between QPM and MAS in the systems can enhance the strength of wet films and decrease their tackiness. Thus, MAS offers an interesting potential as novel anti-tacking agent for QPM coatings.

Topics: Acrylic Resins; Aluminum Compounds; Aluminum Silicates; Clay; Drug Stability; Magnesium Compounds; Nanocomposites; Polymers; Polymethacrylic Acids; Silicates