cellulase and ferric-chloride

Topics: Carbon Dioxide; Cellulase; Ethylene Glycol; Glucose; Hydrolysis; Lignin; Oryza; Polysorbates

In this study, the Fenton reaction, which is naturally used by fungi for wood decay, was employed to pretreat rice straw and increase the enzymatic digestibility for the saccharification of lignocellulosic biomass. Using an optimized Fenton's reagent (FeCl3 and H2O2) for pretreatment, an enzymatic digestibility that was 93.2% of the theoretical glucose yield was obtained. This is the first report of the application of the Fenton reaction to lignocellulose pretreatment at a moderate temperature (i.e., 25°C) and with a relatively high loading of biomass (i.e., 10% (w/v)). Substantial improvement in the process economics of cellulosic fuel and chemical production can be achieved by replacing the conventional pretreatment with this Fenton-mimicking process.

Topics: Biomass; Cellulase; Chlorides; Ferric Compounds; Fungi; Hydrogen Peroxide; Iron; Lignin; Oryza; Waste Products; Wood

Pretreatment combining FeCl3 and Tween80 was performed for cellulose-to-ethanol conversion of eucalyptus alkaline peroxide mechanical pulping waste fibers (EAWFs). The FeCl3 pretreatment alone showed a good effect on the enzymatic hydrolysis of EAWFs, but inhibited enzyme activity to some extent. A surfactant, Tween80, added during FeCl3 pretreatment was shown to significantly enhance enzyme reaction by eluting enzymatic inhibitors such as iron(III) that are present at the surface of the pretreated biomass. Treatment temperature, liquid-solid ratio, treatment time, FeCl3 concentration, and Tween80 dosage for pretreatment were optimized as follows: 180 °C, 8:1, 30 min, 0.15 mol/L, and 1% (w/v). Pretreated EAWFs under such optimal conditions provided enzymatic glucose (based on 100 g of oven-dried feedstock) and substrate enzymatic digestibility of EAWFs of 34.8 g and 91.3% after 72 h of enzymatic hydrolysis, respectively, with an initial cellulase loading of 20 FPU/g substrate.

Topics: Biomass; Cellulase; Chlorides; Eucalyptus; Ferric Compounds; Hydrolysis; Industrial Waste; Polysorbates; Spectroscopy, Fourier Transform Infrared; Textile Industry

Olive tree biomass (OTB) is an agricultural residue which can be used as raw material for bioethanol production. OTB was pretreated with 0.05-0.275 M FeCl(3) solutions at 120-180 °C for 0-30 min. Enzymatic hydrolysis yields were used for assessing pretreatment performance. Optimum FeCl(3) pretreatment conditions were found to be 152.6 °C, 0.26 M FeCl(3) for 30 min. Under such conditions, 100% of hemicellulose was removed, and enzymatic hydrolysis of pretreated solids resulted in a yield of 36.6g glucose/100g of glucose in the raw material. Hemicellulosic sugar recovery in the prehydrolysate was 63.2%. Results compare well with those obtained by other pretreatment strategies on the same raw material, confirming FeCl(3) solutions as a new, feasible approach for bioethanol production.

Topics: Cellulase; Chlorides; Ferric Compounds; Glucose; Hydrolysis; Industrial Waste; Olea; Polysaccharides