bromochloroacetic-acid and formic-acid

Keratin regenerated from wool and fibroin regenerated from silk were mixed in different proportions using formic acid as the common solvent. Both solutions were cast to obtain films and electrospun to produce nanofibers. Scanning electron microscopy investigation showed that, for all electrospun blends (except for 100% keratin where bead defects are present), the fiber diameter of the mats ranged from 900 (pure fibroin) to 160 nm (pure keratin). FTIR and DSC analysis showed that the secondary structure of the proteins was influenced by the blend ratios and the process used (casting or electrospinning). Prevalence of beta-sheet supramolecular structures was observed in the films, while proteins assembled in alpha-helix/random coil structures were observed in nanofibers. Higher solution viscosity, thinner filaments, and differences in the thermal and structural properties were observed for the 50/50 blend because of the enhanced interactions between the proteins.

Topics: Calibration; Calorimetry, Differential Scanning; Fibroins; Formates; Humans; Keratins; Materials Testing; Microscopy, Electron, Scanning; Nanoparticles; Nanotechnology; Protein Structure, Secondary; Proteins; Silk; Solvents; Spectroscopy, Fourier Transform Infrared

Wool and silk were dissolved and used for the preparation of blended films. Two systems are proposed: (1) blend films of silk fibroin and keratin aqueous solutions and (2) silk fibroin and keratin dissolved in formic acid. The FTIR spectra of pure films cast from aqueous solutions indicated that the keratin secondary structure mainly consists of alpha-helix and random coil conformations. The IR spectrum of pure SF is characteristic of films with prevalently amorphous structure (random coil conformation). Pure keratin film cast from formic acid shows an increase in the amount of beta-sheet and disordered keratin structures. The FTIR pattern of SF dissolved in formic acid is characteristic of films with prevalently beta-sheet conformations with beta-sheet crystallites embedded in an amorphous matrix. The thermal behavior of the blends confirmed the FTIR results. DSC curve of pure SF is typical of amorphous SF and the curve of pure keratin show the characteristic melting peak of alpha-helices for the aqueous system. These patterns are no longer observed in the films cast from formic acid due to the ability of formic acid to induce crystallization of SF and to increase the amount of beta-sheet structures on keratin. The nonlinear trend of the different parameters obtained from FTIR analysis and DSC curves of both SF/keratin systems indicate that when proteins are mixed they do not follow additives rules but are able to establish intermolecular interactions. Degradable polymeric biomaterials are preferred candidates for medical applications. It was investigated the degradation behavior of both SF/keratin systems by in vitro enzymatic incubation with trypsin. The SF/keratin films cast from water underwent a slower biological degradation than the films cast from formic acid. The weight loss obtained is a function of the amount of keratin in the blend. This study encourages the further investigation of the type of matrices presented here to be applied whether in scaffolds for tissue engineering or as controlled release drug delivery vehicles.

Topics: Animals; Bombyx; Fibroins; Formates; Keratins; Protein Conformation; Silk; Spectroscopy, Fourier Transform Infrared; Surface Properties; Thermodynamics; Trypsin; Water; Wool

Egg capsules from two caenogastropod whelks, Busycon canaliculatum and Kelletia kelletii, were studied to investigate the genesis of mechanical properties of nascent capsules and to formulate a biomechanical model of this material. Scanning electron microscopy revealed that the capsules possess fibrous hierarchical arrangements at all stages during processing while the mechanical integrity is developing. This suggests that an as yet uncharacterized sclerotization mechanism occurring in the ventral pedal gland primarily binds these fibrous components together. Decomposing the mechanical behavior of WECB through various physical and chemical treatments led us to develop a model for the structure and mechanical properties of this material that supports its designation as a keratin analog. Keratin mechanical models were applied to WECB in its representation as an intermediate state between matrix-free intermediate filament (IF)-type proteins and the more complex composite materials incorporating IFs such as keratin.

Topics: Animals; Formates; Hydrogen-Ion Concentration; Intermediate Filament Proteins; Keratins; Microscopy, Electron, Scanning; Ovum; Snails; Stress, Mechanical; Temperature; Tensile Strength

Structural characteristics of keratin regenerated from water (KW) and from formic (KF) acid solutions were compared. Amino acid composition and molecular weight distribution of KW and KF samples were studied by high performance liquid chromatography (HPLC) and SDS-PAGE electrophoresis. Turbidity measurement showed that keratin dissolved in formic acid forms transparent and stable solutions and no flocculation occurs. In addition, because of its good solvation properties, studied by viscosity measurements, formic acid can be used as a co-solvent to prepare keratin-based blend solutions. Structural studies carried out by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and near infrared (NIR) suggest that formic acid stabilizes the beta-sheet structure. Thermogravimetric analysis (TGA) reveals a higher thermal stability of keratin regenerated from formic acid with respect to keratin regenerated from water.

Topics: Animals; Chromatography, High Pressure Liquid; Flocculation; Formates; Keratins; Protein Structure, Secondary; Sheep; Spectroscopy, Fourier Transform Infrared; Viscosity; Wool; X-Ray Diffraction

Converting poultry feather biomass into useful products presents a new avenue of utilization of agricultural waste material. However, not much is understood about the poultry feather structure or methods to process it. In this study, formic acid vapor is systematically allowed to penetrate the feather fiber structure, which is composed of keratin. The diffusion kinetics show Fickian behavior during absorption. After very long times, i.e., greater than 10(3)h, the absorption experiments are stopped and the formic acid is allowed to desorb from the keratin material. The desorption kinetics of formic acid out of the keratin fiber do not mirror the absorption kinetics, indicating a change in the keratin microstructure. DSC and NMR spectroscopy analyses on the keratin fiber show a reduction in the area of the crystalline melting peak and solubilization of amino acids upon formic acid exposure. This indicates that the crystallinity is disrupted resulting in more amorphous fraction in the keratin polymer.

Topics: Animals; Biomass; Feathers; Formates; Keratins; Poultry; Refuse Disposal

Keratin is abundantly present in nature and the major component of hair, wool, feather, nail and horns. Dissolution of keratin is often required when non-textile applications are demanded. However, the low solubility of keratin in water is the major problem. It becomes unstable and precipitated when stored for a long time. Therefore, it is necessary to find a good solvent that provides high stability and easy processibility. In this research, we used formic acid and dimethylformamide (DMF) to dissolve regenerated keratin protein films. It is shown that formic acid is a good solvent for regenerated keratin proteins for the purpose of storage. Transparent and stable regenerated keratin solution is obtained in formic acid.

Topics: Animals; Formates; Keratins; Wool