boron and stannic-oxide

boron has been researched along with stannic-oxide* in 2 studies

Reviews

1 review(s) available for boron and stannic-oxide

ArticleYear
Electrochemical oxidation of perfluorinated compounds in water.
    Chemosphere, 2016, Volume: 146

    Perfluorinated compounds (PFCs) are persistent and refractory organic pollutants that have been detected in various environmental matrices and municipal wastewater. Electrochemical oxidation (EO) is a promising remediation technique for wastewater contaminated with PFCs. A number of recent studies have demonstrated that the "non-active" anodes, including boron-doped diamond, tin oxide, and lead dioxide, are effective in PFCs elimination in wastewater due to their high oxygen evolution potential. Many researchers have conducted experiments to investigate the optimal conditions (i.e., potential, current density, pH value, plate distance, initial PFCs concentration, electrolyte, and other factors) for PFCs elimination to obtain the maximal elimination efficiency and current efficiency. The EO mechanism and pathways of PFCs have been clearly elucidated, which undergo electron transfer, Kolbe decarboxylation or desulfonation, hydrolysis, and radical reaction. In addition, the safety evaluation and energy consumption evaluation of the EO technology have also been summarized to decrease toxic ion release from electrode and reduce the cost of this technique. Although the ultrasonication and hydrothermal techniques combined with the EO process can improve the removal efficiency and current efficiency significantly, these coupled techniques have not been commercialized and applied in industrial wastewater treatment. Finally, key challenges facing EO technology are listed and the directions for further research are pointed out (such as combination with other techniques, treatment for natural waters contaminated by low levels of PFCs, and reactor design).

    Topics: Boron; Diamond; Electrochemical Techniques; Electrodes; Fluorocarbons; Lead; Oxidation-Reduction; Oxides; Tin Compounds; Wastewater; Water Pollutants, Chemical; Water Purification

2016

Other Studies

1 other study(ies) available for boron and stannic-oxide

ArticleYear
Electrocrystallization of Phase I, CuTCNQ (TCNQ = 7,7,8,8-Tetracyanoquinodimethane), on indium tin oxide and boron-doped diamond electrodes.
    Langmuir : the ACS journal of surfaces and colloids, 2006, Dec-05, Volume: 22, Issue:25

    The electrochemical reduction of TCNQ to TCNQ*- in acetonitrile in the presence of [Cu(MeCN)4]+ has been undertaken at boron-doped diamond (BDD) and indium tin oxide (ITO) electrodes. The nucleation and growth process at BDD is similar to that reported previously at metal electrodes. At an ITO electrode, the electrocrystallization of more strongly adhered, larger, branched, needle-shaped phase I CuTCNQ crystals is detected under potential step conditions and also when the potential is cycled over the potential range of 0.7 to -0.1 V versus Ag/AgCl (3 M KCl). Video imaging can be used at optically transparent ITO electrodes to monitor the growth stage of the very large branched crystals formed during the course of electrochemical experiments. Both in situ video imaging and ex situ X-ray diffraction and scanning electron microscopy (SEM) data are consistent with the nucleation of CuTCNQ taking place at a discrete number of preferred sites on the ITO surface. At BDD electrodes, ex situ optical images show that the preferential growth of CuTCNQ occurs at the more highly conducting boron-rich areas of the electrode, within which there are preferred sites for CuTCNQ formation.

    Topics: Boron; Copper; Crystallization; Electrochemistry; Electrodes; Indium; Nitriles; Organometallic Compounds; Particle Size; Surface Properties; Tin Compounds; X-Ray Diffraction

2006