boron and nitrobenzene

Solutions of sulfate have often been used as background electrolytes in the electrochemical degradation of contaminants and have been generally considered inert even when high-oxidation-power anodes such as boron-doped diamond (BDD) were employed. This study examines the role of sulfate by comparing electro-oxidation rates for seven persistent organic contaminants at BDD anodes in sulfate and inert nitrate anolytes. Sulfate yielded electro-oxidation rates 10-15 times higher for all target contaminants compared to the rates of nitrate anolyte. This electrochemical activation of sulfate was also observed at concentrations as low as 1.6 mM, which is relevant for many wastewaters. Electrolysis of diatrizoate in the presence of specific radical quenchers (tert-butanol and methanol) had a similar effect on electro-oxidation rates, illustrating a possible role of the hydroxyl radical ((•)OH) in the anodic formation of sulfate radical (SO4(•-)) species. The addition of 0.55 mM persulfate increased the electro-oxidation rate of diatrizoate in nitrate from 0.94 to 9.97 h(-1), suggesting a nonradical activation of persulfate. Overall findings indicate the formation of strong sulfate-derived oxidant species at BDD anodes when polarized at high potentials. This may have positive implications in the electro-oxidation of wastewaters containing sulfate. For example, the energy required for the 10-fold removal of diatrizoate was decreased from 45.6 to 2.44 kWh m(-3) by switching from nitrate to sulfate anolyte.

Topics: Boron; Diamond; Diatrizoate; Electric Conductivity; Electrochemistry; Electrodes; Electrolysis; Hydroxyl Radical; Kinetics; Nitrates; Nitrobenzenes; Organic Chemicals; Oxidation-Reduction; Sulfates; Sulfur Oxides; tert-Butyl Alcohol; Wastewater; Water Pollutants, Chemical

Boron dipyrromethene dyes bearing nitro, amino, isocyanate and isothiocyanate functions were readily prepared under mild conditions. Various combinations allow to produce urea, diurea, thiourea, dithiourea in the 3, 4 and 5-substitution positions of the appended phenyl group. Condensation of the 3,4-substituted diamino derivative with 1,10-phenanthroline-5,6-dione and 6-formyl-2-methylpyridine allow to prepare dipyridophenazine and indole derivatives. The 3,5-dinitro-substituted indacene dye was characterized by an X-ray molecular structure showing a pronounced tilt angle of the dinitrophenyl group relative to the indacene core (approximately 84 degrees) whereas one nitro groups is basically coplanar with the phenyl ring and the second titled by approximately 21 degrees. The optical properties of these dyes reveals on/off switching of the fluorescence from the nitro to the amino compounds and further to the urea likely understood in the framework of an photoinduced electron transfer process.

Topics: Boron; Boron Compounds; Chemistry; Electrons; Fluorescence; Fluorescent Dyes; Light; Models, Chemical; Molecular Structure; Nitrobenzenes; Photochemistry; Porphobilinogen; X-Rays