boron and ceric-oxide

boron has been researched along with ceric-oxide* in 4 studies

Other Studies

4 other study(ies) available for boron and ceric-oxide

ArticleYear
Chitosan Hydrogel Beads Supported with Ceria for Boron Removal.
    International journal of molecular sciences, 2019, Mar-28, Volume: 20, Issue:7

    In this study, a chitosan hydrogel supported with ceria (labelled Ce-CTS) was prepared by an encapsulation technique and used for the efficient removal of excess B(III) from aqueous solutions. The functionalisation of chitosan with Ce(IV) and the improvement in the adsorptive behaviour of the hydrogel were determined by SEM-EDS, FTIR, XRD, and inductively coupled plasma optical emission spectrometer (ICP-OES) analyses and discussed. The results demonstrate that Ce-CTS removes boric acid from aqueous solutions more efficiently than either cerium dioxide hydrate or raw chitosan beads, the precursors of the Ce-CTS biosorbent. The maximum adsorption capacity of 13.5 ± 0.9 mg/g was achieved at pH 7 after 24 h. The equilibrium data of boron adsorption on Ce-CTS fitted the Freundlich isotherm model, while the kinetic data followed the Elovich pseudo-second-order model, which indicated that the process was non-homogeneous. The dominant mechanism of removal was the reaction between boric acid molecules and hydroxyl groups bound to the ceria chelated by chitosan active centres. Due to its high efficiency in removing boron, good regeneration capacity and convenient form, Ce-CTS may be considered a promising biosorbent in water purification.

    Topics: Adsorption; Boric Acids; Boron; Cerium; Chitosan; Hydrogels; Hydrogen-Ion Concentration; Kinetics; Water; Water Pollutants, Chemical; Water Purification

2019
Nutritional quality assessment of tomato fruits after exposure to uncoated and citric acid coated cerium oxide nanoparticles, bulk cerium oxide, cerium acetate and citric acid.
    Plant physiology and biochemistry : PPB, 2017, Volume: 110

    Little is known about the effects of surface modification on the interaction of nanoparticles (NPs) with plants. Tomato (Solanum lycopersicum L.) plants were cultivated in potting soil amended with bare and citric acid coated nanoceria (nCeO

    Topics: Acetates; Boron; Calcium; Carbohydrates; Carotenoids; Cerium; Citric Acid; Food Analysis; Fruit; Iron; Lycopene; Manganese; Metal Nanoparticles; Nutritive Value; Solanum lycopersicum; Starch; Surface Properties

2017
Physiological and biochemical responses of sunflower (Helianthus annuus L.) exposed to nano-CeO
    Plant physiology and biochemistry : PPB, 2017, Volume: 110

    Little is known about the interaction of nanoparticles (NPs) with soil constituents and their effects in plants. Boron (B), an essential micronutrient that reduces crop production at both deficiency and excess, has not been investigated with respect to its interaction with cerium oxide NPs (nano-CeO

    Topics: Antioxidants; Boron; Catalase; Cerium; Helianthus; Nanoparticles; Oxidative Stress; Plant Leaves; Plant Physiological Phenomena; Plant Proteins; Plant Roots; Plant Shoots; Soil; Soil Pollutants; Superoxide Dismutase

2017
[Preparation and photocatalytic activity of boron doped CeO2/TiO2 mixed oxides].
    Huan jing ke xue= Huanjing kexue, 2006, Volume: 27, Issue:7

    Boron doped CeO2/TiO2 mixed oxides photocatalysts were prepared by adding boric acid and cerous nitrate during the hydrolyzation of titanium trichloride and tetrabutyl titanate. XRD, UV-Vis DRS and XPS techniques were used to characterize the crystalline structure, light absorbing ability and the chemical state of Boron element in the photocatalyst sample. The photocatalytic activities were evaluated by monitoring the degradation of acid red B under UV irradiation. These results indicate that the wavelengths at adsorbing edge are affected by the content of cerous nitrate and the maximum absorption wavelength is about 481 nm when the mole ratio of Ce/Ti is 1.0. For higher dosage of Cerium, the absorbance edge shifts to blue slightly. The prepared photocatalyst is composed of anatase TiO2 and cubic CeO2 when calcined at 500 degrees C. An increase in the calcination temperature transforms the crystalline structure of the titanium oxides from anatase to rutile, and has no obvious influence on crystalline structure of CeO2 but crystallites growth up. The absorbance edge decreases drastically with the increase of calcination temperature. With a view to the stability of photocatalyst and utilization of sun energy, 500 degrees C of calcination temperature is recommended. The XP spectrum for B1s exhibits that only a few boron ions dope into titania and ceria matrix, others exist in B2O3. The photocatalytic activity increases with increase of cerous nitrate dosage, and decreases drastically due to higher dosage (the mol ratio of Ce/Ti > 0.5). After 10 min UV irradiation, 96% of acid red B is degraded completely over photocatalyst under optimum reaction condition.

    Topics: Boron; Catalysis; Cerium; Environmental Pollutants; Oxidation-Reduction; Photochemistry; Rhodamines; Titanium

2006