boron and 4-hydroxyphenylethanol

Tyrosol (TY) is one of the most abundant phenolic components of olive oil mill wastewaters. Here, the degradation of synthetic aqueous solutions of 0.30 mM TY was studied by a novel heterogeneous electro-Fenton (EF) process, so-called EF-pyrite, in which pyrite powder was the source of Fe(2+) catalyst instead of a soluble iron salt used in classical EF. Experiments were performed with a cell equipped with a boron-doped diamond anode and a carbon-felt cathode, where TY and its products were destroyed by hydroxyl radicals formed at the anode surface from water oxidation and in the bulk from Fenton's reaction between Fe(2+) and H2O2 generated at the cathode. Addition of 1.0 g L(-1) pyrite provided an easily adjustable pH to 3.0 and an appropriate 0.20 mM Fe(2+) to optimize the EF-pyrite treatment. The effect of current on mineralization rate, mineralization current efficiency and specific energy consumption was examined under comparable EF and EF-pyrite conditions. The performance of EF-pyrite was 8.6% superior at 50 mA due to self-regulation of soluble Fe(2+) by pyrite. The TY decay in this process followed a pseudo-first-order kinetics. The absolute rate constant for TY hydroxylation was 3.57 × 10(9) M(-1) s(-1), as determined by the competition kinetics method. Aromatic products like 3,4-dihydroxyphenylethanol, 4-hydroxyphenylacetic acid, 4-hydroxybenzoic acid, 3,4-dihydroxybenzoic acid and catechol, as well as o-benzoquinone, were identified by GC-MS and reversed-phase HPLC. Short-chain aliphatic carboxylic acids like maleic, glycolic, acetic, oxalic and formic were quantified by ion-exclusion HPLC. Oxalic acid was the major and most persistent product found. Based on detected intermediates, a plausible mineralization pathway for TY by EF-pyrite was proposed.

Topics: Boron; Carbon; Catalysis; Diamond; Electrochemical Techniques; Electrodes; Hydrogen Peroxide; Hydrogen-Ion Concentration; Hydroxyl Radical; Iron; Kinetics; Phenylethyl Alcohol; Sulfides; Water Pollutants, Chemical