ascorbic-acid and tetracyanoquinodimethane

A flexible electrochemical micro(bio)sensor has been designed for determination of several biological compounds, specifically, ascorbate, dopamine, and glucose, in human lachrymal liquid (tears). The microsensor for simultaneous determination of ascorbate and dopamine concentrations was based on a gold microwire modified with the tetrathiafulvalen-7,7,8,8-tetracyanoquinodimethane complex as a catalyst. To monitor glucose concentration in tears, glucose dehydrogenase was immobilized on a gold microwire modified with carbon nanotubes and an osmium redox polymer. A capillary microcell was constructed for sampling tears. The cell had a working volume of 60-100 nL with a sampling deviation of 6.7%. To check if the microcell was properly filled with buffer or tear sample, a control electrode was introduced into the construction. The electrode was used to measure the electrical resistance of a fully filled nanovolume cell. The mechanical flexibility is one of the most important features of the prototype and allowed direct collection of tears with minimized risk of damage to the eye.

Topics: Ascorbic Acid; Biosensing Techniques; Catalysis; Dopamine; Electrochemical Techniques; Enzymes, Immobilized; Equipment Design; Glucose; Glucose Dehydrogenases; Gold; Humans; Male; Nanotubes, Carbon; Nitriles; Sample Size; Tears

A biosensor system using flow injection analysis (FIA) has been developed for the analysis of glucose in human serum. The system consists of the enzyme glucose oxidase incorporated into graphite paste modified with the electroactive material tetracyanoquinodimethane (TCNQ). TCNQ acts as an efficient mediator for oxidation of the reduced enzyme at 200 mV vs Ag/AgCl. The flow injection assay described has detection limits of 2 mM glucose using a 100-microliters sample injection through a 250-microliters sample loop. Data are presented to show the effect of sample injection volume and flow rate on the response of the FIA sensor. The biosensor exhibited excellent reproducibility for 800 injections. The loss of response after 800 injections was due to leaching of TCNQ from the graphite paste. Each assay takes 3 min giving a sample throughput of 20 per hour at a flow rate of 30 ml/h. The sensor was applied to the determination of glucose in human serum. The glucose measurements are in good agreement with those of a commercially available spectrophotometric method. Data showing the effect of interfering substances, ascorbic acid and acetaminophen, on the response of the sensor are also reported.

Topics: Acetaminophen; Ascorbic Acid; Biosensing Techniques; Blood Glucose; Electrochemistry; Enzymes, Immobilized; Glucose Oxidase; Graphite; Humans; Nitriles