ascorbic-acid and cadmium-telluride

A turn-on fluorescent sensor based on CdTe quantum dots (QDs) is designed for highly sensitive and selective ascorbic acid (AA) detection. CdTe shows a strong emission centered at 578 nm. When assembled with poly(sodium 4-styrenesulfonate) (PSS) and methyl viologen (Mv

Topics: Ascorbic Acid; Cadmium Compounds; Fluorescence; Humans; Limit of Detection; Oxidation-Reduction; Paraquat; Quantum Dots; Spectrometry, Fluorescence; Tellurium

Mercaptopropionic acid (MPA) capped CdTe quantum dots (MPA-CdTe QDs) were synthesized in aqueous medium by hydrothermal method, which modified by Fe

Topics: 3-Mercaptopropionic Acid; Ascorbic Acid; Cadmium Compounds; Fluorescent Dyes; Oxidation-Reduction; Quantum Dots; Spectrometry, Fluorescence; Spectrophotometry, Ultraviolet; Spectroscopy, Fourier Transform Infrared; Tellurium

Ascorbic acid (AA) and alkaline phosphatase (ALP) serve as an important coenzyme and enzyme in multiple biological metabolism reactions, respectively, and abnormal levels of these substrates have been associated with several diseases. Herein, a new and simple fluorescence strategy has been developed for AA and ALP sensing by exploiting CdTe quantum dots (QDs) as an effective signal indicator. This method is mainly based on the selective fluorescence-quenching reaction between Ag+ and CdTe QDs, as opposed to silver nanoparticles (Ag NPs); Ag+ can be reduced to Ag NPs by AA. Furthermore, by taking advantage of AA as a mediator, this strategy is further exploited for ALP assay given that ALP can cause the hydrolysis of l-ascorbic acid-2-phosphate (AAP), which yields AA. Under optimal conditions, controlled generation of Ag NPs and the selective recognition-based sensing system exhibit high sensitivity toward AA and ALP with limits of detection (LODs) of 3 μM and 0.25 U L-1 and linear ranges of detection from 0 to 800 μM and 1 to 1000 U L-1, respectively. Moreover, the sensor was successfully used for assaying AA in fruit juice and ALP in human serum. The results demonstrate that the proposed fluorescence strategy has significant advantages, such as its simplicity, cost-effectiveness, and rapid runtime, and the operational convenience of this label-free method further demonstrates its potential for constructing effective sensors with biochemical and clinical applications.

Topics: Alkaline Phosphatase; Ascorbic Acid; Cadmium Compounds; Chemistry Techniques, Analytical; Feasibility Studies; Metal Nanoparticles; Quantum Dots; Silver; Spectrometry, Fluorescence; Tellurium; Time Factors

In the present research, a sensitive biosensing method was proposed for the detection of trace amounts of ascorbic acid (AA). Herein, colloidal silver nanoparticles (SNPs) were successfully in-situ produced by chemical reduction of silver ion in the presence of AA, as a reducing agent. The one-pot in-situ produced silver nanoparticles were characterized by UV-vis, dynamic light scattering (DLS), zeta potential and transmission electron microscopic (TEM). SNPs act as a strong fluorescence quencher for the CdTe quantum dots via an inner filter effect (IFE). Since the absorption band of SNPs entirely covered both emission and excitation bands of QDs. Therefore, the decreasing in the fluorescence signal depends on the AA concentration in the linear range of 0.2-88.0ngmL

Topics: Ascorbic Acid; Cadmium Compounds; Humans; Metal Nanoparticles; Quantum Dots; Tellurium

An automated multi-pumping flow system is proposed for the chemiluminometric determination of ascorbic acid in pharmaceutical formulations, relying on the ability of semiconductor nanocrystals to generate short-lived reactive species upon photo-irradiation. A photo-unit based on visible-light-emitting diodes is used to photo-excite cadmium telluride (CdTe) quantum dots capped with glutathione, leading to the generation of radicals that react with luminol under alkaline conditions, yielding the chemiluminescence. Ascorbic acid acts as a radical scavenger, preventing the oxidation of luminol, thus ensuring a concentration-dependent chemiluminescence quenching. After system optimization, a linear working range of 5.0 × 10(-7) to 5.0 × 10(-6) mol/L ascorbic acid (r = 0.9967, n = 5) was attained, with a detection limit of 3.05 × 10(-7) mol/L and a sampling rate of 200/h. The flow system was applied to the analysis of pharmaceutical formulations and the results were in good agreement with those obtained by the reference titrimetric procedure (RD < ± 4.3%, n = 7).

Topics: Ascorbic Acid; Cadmium Compounds; Chemistry, Pharmaceutical; Glutathione; Luminescent Measurements; Luminol; Molecular Structure; Photochemical Processes; Quantum Dots; Reactive Oxygen Species; Tellurium

In recent years, the number of scientific papers regarding the use of quantum dots (QDs) has increased almost exponentially, especially emphasizing their use for new applications and describing new approaches. One of the future trends in the development of new methods of analysis is the use of automated methodologies. Among them, Multicommutated Flow Injection Analysis has been here selected in order to show its potentiality in pharmaceutical and food analysis. Using water-soluble CdTe QDs modified by mercaptopropionic acid, a flow system was developed for the determination of ascorbic acid. The system was based on the quenching effect produced by ascorbic acid on the fluorescence of QDs. Under the optimized conditions, the relationship between the fluorescence intensity of the QDs and ascorbic acid concentration was linear in the range of 12-250 μg mL(-1), obtaining a sample throughput of 68 determinations per hour. The proposed method was applied to the determination of ascorbic acid in pharmaceutical formulations, goji capsules and fruit juices. The results obtained were in good agreement with those showed by a reference method, so indicating the utility of the proposed method in the clinical and alimentary fields.

Topics: 3-Mercaptopropionic Acid; Ascorbic Acid; Beverages; Cadmium Compounds; Capsules; Chemistry, Pharmaceutical; Equipment Design; Flow Injection Analysis; Food Analysis; Quantum Dots; Spectrometry, Fluorescence; Tellurium

Cysteine and triethanolamine capped CdTe nanoparticles have been synthesized using a simple aqueous solution based method. This method involves the reaction of tellurium powder with sodium borohydride (NaBH(4)) in water to produce telluride ions (Te(2-)), followed by the simultaneous addition of an aqueous solution of cadmium chloride or other cadmium source (acetate, carbonate and nitrate) and solution of L-cysteine ethyl ester hydrochloride or triethanolamine. The effect of capping agent on the size, structure and morphology of the as-synthesized nanoparticles was investigated. The particles were characterized using optical spectroscopy, transmission electron microscopy (TEM), high-resolution TEM (HRTEM), X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy.

Topics: Ascorbic Acid; Borohydrides; Cadmium; Cadmium Compounds; Cysteine; Ethanolamines; Indicators and Reagents; Luminescence; Microscopy, Electron, Transmission; Nanoparticles; Particle Size; Spectrophotometry, Ultraviolet; Spectroscopy, Fourier Transform Infrared; Tellurium; X-Ray Diffraction

The reversible electrochemical modulation of fluorescence and selective sensing of ascorbic acid has been achieved using a DCIP-CA-CdTe QD system. Ascorbic acid could be detected over a linear range from 2.33 μM to 56.49 μM, with a detection limit of 0.50 μM.

Topics: 2,6-Dichloroindophenol; Ascorbic Acid; Cadmium Compounds; Chemistry Techniques, Analytical; Electrochemistry; Quantum Dots; Spectrometry, Fluorescence; Tellurium

By controlling the reflux time and the quantity of the shell materials, different sizes of thioglycollic acid (TGA) modified CdTe/CdSe core/shell quantum dots were synthesized in aqueous solution. This type of QDs was used for sensitive and selective determination of ascorbic acid in commercial tablets. Under optimal conditions, a good linearity was observed between the relative fluorescence (FL) intensity and the concentration of ascorbic acid in the range of 4.0 to 64.0 μg/mL with a correlation coefficient of 0.9968. The limit of detection was 2.4 μg/mL. This method was applied to the determination of the ascorbic acid in Vitamin C tablets and Vitamin C Yinqiao pills, and satisfactory results were obtained.

Topics: Ascorbic Acid; Cadmium Compounds; Fluorescent Dyes; Hydrogen-Ion Concentration; Molecular Probe Techniques; Quantum Dots; Selenium Compounds; Tellurium

Most of the fluorescence resonance energy transfer (FRET)-based sensors employing quantum dots (QDs) usually use organic fluorophores and gold nanoparticles as the quenchers. However, complex processes for the modification/immobilization of the QDs are always necessary, as the generation of FRET requires strict distance between the donor and acceptor. Herein, a simple chemical redox strategy for modulating the surface chemistry of the QDs to develop a QD-based turn-on fluorescent probe is reported. The principle of the strategy is demonstrated by employing CdTe QDs with KMnO(4) as the quencher and ascorbic acid as the target analyte. The fluorescence of CdTe QDs is quenched with a blue-shift upon addition of KMnO(4) due to the oxidation of the Te atoms on the surface of the QDs. The quenched fluorescence of the QDs is then recovered upon addition of ascorbic acid due to the reduction of CdTeO(3)/TeO(2) on the surface of the QDs to CdTe. The recovered fluorescence of the QDs increases linearly with the concentration of ascorbic acid from 0.3 to 10 microM. Thus, a novel QD-based turn-on fluorescent probe with a detection limit as low as 74 nM is developed for the sensitive and selective detection of ascorbic acid in biological fluids. The present approach avoids the complex modification/immobilization of the QDs involved in FRET-based sensors, and opens a simple pathway to developing cost-effective, sensitive, and selective QD-based fluorescence turn-on sensors/probes for biologically significant antioxidants.

Topics: Ascorbic Acid; Body Fluids; Cadmium Compounds; Fluorescence; Glutathione; Humans; Oxidation-Reduction; Particle Size; Potassium Permanganate; Quantum Dots; Spectrometry, Fluorescence; Surface Properties; Tellurium; Time Factors