amphotericin-b and 1-2-distearoylphosphatidylethanolamine

amphotericin-b has been researched along with 1-2-distearoylphosphatidylethanolamine* in 5 studies

Reviews

1 review(s) available for amphotericin-b and 1-2-distearoylphosphatidylethanolamine

ArticleYear
Pharmaceutical design of the liposomal antimicrobial agents for infectious disease.
    Current pharmaceutical design, 2002, Volume: 8, Issue:6

    From the point of view of pharmaceutical design, development of carrier system of antimicrobial agents with functional properties should be required. We introduced here the development-process of liposomal formulations of polyene macrolide antibiotics, amphotericin B (AmB) and nystatin as injectable dosage forms. Both development of the effective encapsulation method of these drugs in liposomes and investigation of the encapsulation mechanism and the molecular states of them are important to determine the optimum lipid composition for therapeutic uses. Enhanced encapsulation of these hydrophobic drugs, long-circulation in blood and high targetability are the required functional properties for the carrier system. Low encapsulation of AmB in liposomes has been overcome by the incorporation of polyethylene glycol-lipid derivatives, DSPE-PEG. Both the hydration with 9% sucrose solution and the complex formation between AmB and DSPE-PEG contribute not only to the enhanced encapsulation of AmB in liposomes but also to the stability and long-circulation properties in blood. Encapsulation mechanism and the molecular states of AmB in liposomes were also investigated by several methods. AmB-encapsulating PEG liposomes (PEG-L-AmB) with optimum lipid composition also showed reduced toxicity and higher therapeutic efficacy on murine model of pulmonary aspergillosis than that of conventionally used AmB formulations. Further enhanced therapeutic effects was observed by using AmB-encapsulating PEG immunoliposomes (34A-PEG-L-AmB) carrying monoclonal antibodies at the distal ends of the PEG chains. On the contrary to AmB, encapsulation characteristics of nystatin were apparently different from that of AmB, though the chemical structure is very similar. Self-association of nystatin with sterol-free lipid membrane dominantly influences on the encapsulation characteristics. Many experiments about the encapsulation of antimicrobial agents in liposomes have been demonstrated by many researchers, but there are not so much drugs developed for commercially used. Optimization of the formulation of functional drug-carrier system should be important for the practical uses.

    Topics: Amphotericin B; Animals; Anti-Bacterial Agents; Communicable Diseases; Drug Carriers; Drug Design; Liposomes; Lung; Nystatin; Phosphatidylethanolamines; Polyethylene Glycols; Solvents

2002

Other Studies

4 other study(ies) available for amphotericin-b and 1-2-distearoylphosphatidylethanolamine

ArticleYear
Encapsulation and release of Amphotericin B from an ABC triblock fluorous copolymer.
    Pharmaceutical research, 2012, Volume: 29, Issue:1

    PEG-phospholipid-based micelles have been successfully used for the solubilization of several hydrophobic drugs but generally lack sustained stability in blood. Our novel PEG-Fluorocarbon-DSPE polymers were designed to increase stability and improve time-release properties of drug-loaded micelles.. Novel ABC fluorous copolymers were synthesized, characterized, and used for encapsulation release of amphotericin B. FRET studies were used to study micelle stability.. The micelles formed by the new polymers showed lower critical micelle concentrations and higher viscosity cores than those formed by the polymers lacking the fluorous block. FRET studies indicated that fluorocarbon-containing micelles had increased stability in presence of human serum. Physicochemical properties and in vitro release profile of micelles loaded with Amphotericin B (AmB) were studied.. The effect of PEG length and fluorocarbon incorporation were investigated. The shorter hydrophilic PEG2K induced greater stability than PEG5K by decreasing the proportion of hydrophilic block of the polymer. The fluorocarbon placed between hydrophilic and hydrophobic block formed a fluorous shell contributing to the enhanced thermodynamic stability of micelles and to the drug sustained release. Polymer mPEG2K-F(10)-DSPE, bearing both a fluorocarbon block and a shorter mPEG, showed the greatest stability and the longest half-life for AmB release.

    Topics: Amphotericin B; Anti-Bacterial Agents; Drug Carriers; Fluorescence Resonance Energy Transfer; Fluorocarbons; Half-Life; Humans; Hydrophobic and Hydrophilic Interactions; Micelles; Molecular Structure; Phosphatidylethanolamines; Polyethylene Glycols; Serum; Surface Tension

2012
Combination antifungal therapy involving amphotericin B, rapamycin and 5-fluorocytosine using PEG-phospholipid micelles.
    Pharmaceutical research, 2008, Volume: 25, Issue:9

    Rapamycin and 5-fluorocytosine (5-FC) are antifungal agents with unique mechanisms of activity, with potential for cooperative interaction with AmB. Combination antifungal therapy involving conventional AmB has been restricted by poor physical stability and compatibility with antifungal drugs and vehicles.. AmB and rapamycin were encapsulated in 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-methoxy poly(ethylene glycol) (PEG-DSPE) micelles using a solvent evaporation method. The physical stability of micelle encapsulated AmB and rapamycin with 5-FC and saline was evaluated using dynamic light scattering (DLS). In vitro susceptibility of Candida albicans isolates to 5-FC and PEG-DSPE micelle solubilized AmB and rapamycin has been evaluated. Interactive effects have been quantified using a checkerboard layout.. In contrast with conventional AmB, PEG-DSPE micelles encapsulating AmB and rapamycin are compatible with saline and 5-FC over 12 h. The solubilized drugs retain high level of potency in vitro. The combination of solubilized AmB and rapamycin was indifferent, as fractional inhibitory concentration (FIC) index and combination index (CI) values were approximately 1. Combinations of solubilized AmB or rapamycin with 5-FC, and the three-drug combination were moderately synergistic since the FIC index and CI values were consistent less than 1.. These results indicate that AmB solubilized in PEG-DSPE micelles is compatible with solubilized rapamycin and 5-FC. The indifferent or moderately synergistic activity of combinations is encouraging and warrants further investigation in appropriate rodent models.

    Topics: Amphotericin B; Antifungal Agents; Candida albicans; Chemistry, Pharmaceutical; Drug Carriers; Drug Combinations; Drug Stability; Drug Synergism; Flucytosine; Micelles; Microbial Sensitivity Tests; Phosphatidylethanolamines; Polyethylene Glycols; Sirolimus; Solubility; Technology, Pharmaceutical

2008
The study on brain targeting of the amphotericin B liposomes.
    Journal of drug targeting, 2003, Volume: 11, Issue:2

    To improve transporting drugs across the Blood Brain Barrier (BBB) into the brain, RMP-7 was conjugated to the surface of liposomes containing Amphotericin B (AmB) for cerebral inflammation, because it can selectively bound to the B2 receptors on the capillary blood vessel. First, RMP-7 was conjugated to DSPE-PEG-NHS [1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-n-[poly (ethylenegly-col)]-hydroxy succinamide, PEG M 3400] under mild condition to obtain a predominantly 1:1 conjugate (DSPE-PEG-RMP-7), as evidenced by the Matrix-Assisted Laser Desorption-Ionization Time-of-Flight Mass Spectrometry (MALDI-TOF-MS). The second, endothelium cell was cultured on the cell insert to form an in vitro BBB model and the stereoscan microscope, electric resistance and permeation of horse-radish peroxidase (HRP) across the endothelium cell monolayer were used as indicators to evaluate the integrality of the monolayer, and then the in vitro BBB model was used to determine the bioactivity of DSPE-PEG-RMP-7 "opening" BBB. The results demonstrated the in vitro BBB model was set up, RMP-7 and DSPE-PEG-RMP-7 could improve the transporting of HRP across the BBB. The third, the liposomes containing AmB (AmB-L-PEG) was prepared by modified Film-sonication method and DSPE-PEG-RMP-7 was used to modify the AmB-L-PEG to obtain AmB-L-PEG-RMP-7. The fourth, tissue distribution of AmB in the rats of three groups was determined: Group I, AmB-L-PEG; Group II, AmB-L-PEG+RMP-7 (the physical mixture of AmB-L-PEG and RMP-7); Group III, AmB-PEG-RMP-7. The drugs were transfused into the rats through the femoral vein. The concentration of AmB in the tissue was checked using High-Performance Liquid Chromatography (HPLC) method. The rank of AmB concentration in the brain were as follows: III>II>I. The AmB concentration in the liver, spleen, lung and kidney had no significant difference. The concentration of AmB in the brain of the group III was raised several times higher than that in the other two groups, because the DSPE-PEG-RMP-7 had been inserted in the surface of AmB-L-PEG. Both the RMP-7 and AmB-L-PEG could reach BBB at the same time. When RMP-7 selectively reacted with the B2 receptor, the BBB is "opened" and AmB was transported into the brain at the same time. While in group II, the RMP-7 could improve the AmB concentration in the brain a little, because the RMP-7 and liposomes could not reach BBB at the same time. The distribution of AmB in the tissues demonstrated that the RMP-7 and its

    Topics: Aminoglycosides; Amphotericin B; Animals; Anti-Bacterial Agents; Biological Transport; Blood-Brain Barrier; Bradykinin; Cell Membrane Permeability; Chromatography, High Pressure Liquid; In Vitro Techniques; Injections, Intravenous; Liposomes; Particle Size; Phosphatidylethanolamines; Polyethylene Glycols; Rats; Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization; Tissue Distribution

2003
Molecular localization and state of amphotericin B in PEG liposomes.
    International journal of pharmaceutics, 1999, Dec-20, Volume: 193, Issue:1

    We investigated the molecular localization and state of amphotericin B (AmB) encapsulated in polyethylene glycol (PEG)-coated liposomes. AmB-encapsulating PEG-liposomes composed of dipalmitoylphosphatidylcholine (DPPC), cholesterol (CH) and distearoyl-N-(monomethoxy poly(ethylene glycol)succinyl) phosphatidylethanolamine (DSPE-PEG, average MW of the PEG chain 2000) were prepared by hydration with 9% sucrose solution and extrusion. The amount of AmB encapsulated in the liposomes increased with incorporation of DSPE-PEG and decreased with that of CH. The molecular localization and state of AmB were investigated by PEG/dextran two-phase partition, potassium permeability measurement, fluorescence quenching measurement and circular dichroism (CD) spectroscopy. The results suggest that there are two types of AmB localization in PEG-liposomes, one of which corresponds to the complex of AmB with DSPE-PEG on the membrane surface, while the other corresponds to the pore form of AmB in the hydrophobic core of the liposomal membrane. AmB in PEG liposomes was present in both aggregated and monomeric states.

    Topics: 1,2-Dipalmitoylphosphatidylcholine; Amphotericin B; Cholesterol; Excipients; Fluorescence; Liposomes; Phosphatidylethanolamines; Polyethylene Glycols; Potassium; Solubility; Spectrum Analysis

1999