Page last updated: 2024-08-21

aluminum oxide and methacryloyloxydecyl dihydrogen phosphate

aluminum oxide has been researched along with methacryloyloxydecyl dihydrogen phosphate in 29 studies

Research

Studies (29)

TimeframeStudies, this research(%)All Research%
pre-19900 (0.00)18.7374
1990's1 (3.45)18.2507
2000's7 (24.14)29.6817
2010's17 (58.62)24.3611
2020's4 (13.79)2.80

Authors

AuthorsStudies
Atsuta, M; Matsumura, H; Taira, Y; Tanaka, T; Yoshida, K1
Aka, PS; Atsu, SS; Kilicarslan, MA; Kucukesmen, HC1
Chen, ZX; Kawaguchi, T; Shimizu, H; Takahashi, Y; Tsue, F1
Nijhuis, H; Ozcan, M; Valandro, LF1
Akgungor, G; Aydin, M; Sen, D1
Ishikawa, Y; Koizumi, H; Matsumura, H; Yamada, K1
Almilhatti, HJ; Betiol, EA; Giampaolo, ET; Machado, AL; Pavarina, AC; Vergani, CE1
Barloi, A; Kern, M; Yang, B2
Ide, T; Matsuda, Y; Matsumura, H; Tanoue, N; Yanagida, H1
Kern, M; Kocjan, A; Kosmac, T; Lehmann, F; Zhang, S1
Gomi, H; Lin, J; Shinya, A1
da Silva, EM; de Goes, MF; Maia, LC; Miragaya, L; Sabrosa, CE1
Fazi, G; Ferrari, M; Vichi, A1
Albaladejo, A; Castillo-Oyagüe, R; Gomes, AL; Lynch, CD; Montero, J1
Carvalho, RM; Coelho, PG; Janal, MN; Lorenzoni, FC; Silva, NR; Thompson, VP; Valverde, GB; Weltemann, KD1
De Munck, J; Inokoshi, M; Kameyama, A; Minakuchi, S; Van Meerbeek, B1
Egoshi, T; Sawase, T; Soeno, K; Taira, Y1
Chen, L; Shen, H; Suh, BI1
Amaral, M; Belli, R; Cesar, PF; Lohbauer, U; Petschelt, A; Valandro, LF1
Arantes-Oliveira, S; Portugal, J; Seabra, B1
Inokoshi, M; Van Meerbeek, B1
Burgess, JO; Chavali, R; Lawson, NC1
Bielen, V; Inokoshi, M; Minakuchi, S; Munck, JD; Naert, I; Van Meerbeek, B; Vanmeensel, K; Vleugels, J; Zhang, F1
Hasankhani, A; Matinlinna, JP; Mirmohammadi, H; Samimi, P1
Anggraini, SA; Fujio, Y; Ikeda, H; Kitamura, C; Miyahara, H; Nagamatsu, Y; Shimizu, H; Yoshii, S1
Ardalani, S; Franco-Tabares, S; Franke Stenport, V; Hjalmarsson, L; Johansson, CB; Nakamura, K; Wardecki, D1
Baba, K; Kobayashi-Hisamatsu, M; Miyazaki, T; Tanaka, S1
Abd El-Sattar, NEA; Abdou, A; Koko, M; Tagami, J; Takagaki, T1

Trials

6 trial(s) available for aluminum oxide and methacryloyloxydecyl dihydrogen phosphate

ArticleYear
Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging.
    Dental materials journal, 2008, Volume: 27, Issue:1

    Topics: Aluminum Oxide; Carbon Compounds, Inorganic; Dental Bonding; Dental Cements; Dental Porcelain; Humans; Materials Testing; Methacrylates; Organophosphorus Compounds; Resin Cements; Shear Strength; Silanes; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Yttrium; Zirconium

2008
Effect of self-adhesive resin cement and tribochemical treatment on bond strength to zirconia.
    International journal of oral science, 2010, Volume: 2, Issue:1

    Topics: Aluminum Compounds; Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Fluorides; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Resin Cements; Shear Strength; Silanes; Silicon Compounds; Silicon Dioxide; Stress, Mechanical; Surface Properties; Tricarboxylic Acids; Zirconium

2010
Evaluation of self-adhesive resin cement bond strength to yttria-stabilized zirconia ceramic (Y-TZP) using four surface treatments.
    The journal of adhesive dentistry, 2011, Volume: 13, Issue:5

    Topics: Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Coated Materials, Biocompatible; Dental Bonding; Dental Cements; Dental Etching; Dental Porcelain; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Shear Strength; Silanes; Spectrometry, X-Ray Emission; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Water; Yttrium; Zirconium

2011
Influence of sandblasting granulometry and resin cement composition on microtensile bond strength to zirconia ceramic for dental prosthetic frameworks.
    Journal of dentistry, 2013, Volume: 41, Issue:1

    Topics: Aluminum Oxide; Ceramics; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Prosthesis Design; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Particle Size; Resin Cements; Self-Curing of Dental Resins; Stress, Mechanical; Surface Properties; Tensile Strength; Time Factors; Zirconium

2013
Surface characterisation and bonding of Y-TZP following non-thermal plasma treatment.
    Journal of dentistry, 2013, Volume: 41, Issue:1

    Topics: Adhesiveness; Aluminum Oxide; Argon; Carbon; Carbon Compounds, Inorganic; Cementation; Ceramics; Coated Materials, Biocompatible; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Polishing; Humans; Interferometry; Materials Testing; Methacrylates; Oxygen; Photoelectron Spectroscopy; Plasma Gases; Resin Cements; Silicon Compounds; Silicon Dioxide; Stress, Mechanical; Surface Properties; Surface Tension; Tensile Strength; Wettability; Yttrium; Zirconium

2013
Durable bonding to mechanically and/or chemically pre-treated dental zirconia.
    Journal of dentistry, 2013, Volume: 41, Issue:2

    Topics: Adhesiveness; Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Cements; Dental Etching; Dental Porcelain; Humans; Hydrophobic and Hydrophilic Interactions; Methacrylates; Microscopy, Electron, Scanning; Resin Cements; Silanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Water; Yttrium; Zirconium

2013

Other Studies

23 other study(ies) available for aluminum oxide and methacryloyloxydecyl dihydrogen phosphate

ArticleYear
Influence of surface oxidation of titanium on adhesion.
    Journal of dentistry, 1998, Volume: 26, Issue:1

    Topics: Adhesiveness; Aluminum Oxide; Boron Compounds; Dental Bonding; Dental Casting Investment; Dental Casting Technique; Dental Cements; Dental Materials; Dental Polishing; Hot Temperature; Materials Testing; Methacrylates; Methylmethacrylate; Methylmethacrylates; Oxidation-Reduction; Resin Cements; Stress, Mechanical; Surface Properties; Technology, Dental; Thermodynamics; Titanium

1998
Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin.
    The Journal of prosthetic dentistry, 2006, Volume: 95, Issue:6

    Topics: Air Abrasion, Dental; Aluminum Oxide; Ceramics; Composite Resins; Dental Bonding; Dental Materials; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Resin Cements; Shear Strength; Silanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Zirconium

2006
Bonding of autopolymerizing acrylic resins to magnetic stainless steel alloys using metal conditioner.
    Journal of dentistry, 2008, Volume: 36, Issue:2

    Topics: Acrylic Resins; Aluminum Oxide; Barbiturates; Boron Compounds; Carbon Compounds, Inorganic; Dental Alloys; Dental Bonding; Dental Etching; Dental Materials; Humans; Magnetics; Materials Testing; Methacrylates; Methylmethacrylates; Resin Cements; Shear Strength; Silicon Compounds; Stainless Steel; Stress, Mechanical; Surface Properties; Temperature; Thiones

2008
Influence of different surface treatments on the short-term bond strength and durability between a zirconia post and a composite resin core material.
    The Journal of prosthetic dentistry, 2008, Volume: 99, Issue:5

    Topics: Aluminum Oxide; Coated Materials, Biocompatible; Composite Resins; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Post and Core Technique; Resin Cements; Silanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Zirconium

2008
Effect of single-liquid acidic primers on bonding of a composite luting agent joined to a prefabricated alumina coping material.
    Nihon Hotetsu Shika Gakkai zasshi, 2008, Volume: 52, Issue:2

    Topics: Acrylic Resins; Aluminum Oxide; Composite Resins; Dental Bonding; Dental Materials; Materials Testing; Methacrylates; Phosphonoacetic Acid; Polyurethanes

2008
Adhesive bonding of resin composite to various Ni-Cr alloy surfaces using different metal conditioners and a surface modification system.
    Journal of prosthodontics : official journal of the American College of Prosthodontists, 2009, Volume: 18, Issue:8

    Topics: Acrylates; Aluminum Oxide; Carbon Compounds, Inorganic; Chromium Alloys; Composite Resins; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Dental Polishing; Dental Veneers; Glass Ionomer Cements; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Nickel; Resin Cements; Shear Strength; Silanes; Silicate Cement; Silicon Compounds; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Tricarboxylic Acids; Water

2009
Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin.
    Dental materials : official publication of the Academy of Dental Materials, 2010, Volume: 26, Issue:1

    Topics: Air; Aluminum Oxide; Composite Resins; Dental Bonding; Dental Etching; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Resin Cements; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Thiones; Time Factors; Water; Zirconium

2010
Surface conditioning influences zirconia ceramic bonding.
    Journal of dental research, 2009, Volume: 88, Issue:9

    Topics: Aluminum Oxide; Composite Resins; Dental Bonding; Dental Etching; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Microscopy, Confocal; Microscopy, Electron, Scanning; Pressure; Resin Cements; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Thiones; Time Factors; Water; Zirconium

2009
Bond strength of poly(methyl methacrylate) denture base material to cast titanium and cobalt-chromium alloy.
    The journal of adhesive dentistry, 2010, Volume: 12, Issue:3

    Topics: Acrylic Resins; Aluminum Oxide; Chromium Alloys; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Dental Stress Analysis; Denture Bases; Humans; Materials Testing; Methacrylates; Particle Size; Phosphonoacetic Acid; Polymethyl Methacrylate; Shear Strength; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Titanium

2010
Influence of contamination on resin bond strength to nano-structured alumina-coated zirconia ceramic.
    European journal of oral sciences, 2010, Volume: 118, Issue:4

    Topics: Acid Etching, Dental; Aluminum Oxide; Carbon Compounds, Inorganic; Coated Materials, Biocompatible; Coloring Agents; Composite Resins; Dental Bonding; Dental Materials; Dental Polishing; Dental Porcelain; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Nanostructures; Phosphates; Phosphoric Acids; Resin Cements; Saliva; Silicon Compounds; Silicones; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Water; Yttrium; Zirconium

2010
Influence of surface pretreatment on the short-term bond strength of resin composite to a zirconia-based material.
    American journal of dentistry, 2012, Volume: 25, Issue:2

    Topics: Aluminum Oxide; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Stress Analysis; Hot Temperature; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Particle Size; Resin Cements; Silanes; Stress, Mechanical; Surface Properties; Tensile Strength; Yttrium; Zirconium

2012
Effects of sandblasting, H2SO4/HCl etching, and phosphate primer application on bond strength of veneering resin composite to commercially pure titanium grade 4.
    Dental materials journal, 2013, Volume: 32, Issue:2

    Topics: Acid Etching, Dental; Adhesiveness; Aluminum Oxide; Carbon Compounds, Inorganic; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Veneers; Humans; Hydrochloric Acid; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Nanopores; Polyurethanes; Resin Cements; Shear Strength; Silicon Compounds; Stress, Mechanical; Sulfuric Acids; Surface Properties; Temperature; Thiones; Time Factors; Titanium; Water

2013
Effect of incorporating BisGMA resin on the bonding properties of silane and zirconia primers.
    The Journal of prosthetic dentistry, 2013, Volume: 110, Issue:5

    Topics: Acid Etching, Dental; Adhesiveness; Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Dental Bonding; Dental Etching; Dental Porcelain; Dental Stress Analysis; Humans; Hydrofluoric Acid; Materials Testing; Methacrylates; Resin Cements; Shear Strength; Silanes; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Wettability; Zirconium

2013
The potential of novel primers and universal adhesives to bond to zirconia.
    Journal of dentistry, 2014, Volume: 42, Issue:1

    Topics: Aluminum Oxide; Ceramics; Dental Bonding; Dental Cements; Dental Etching; Dental Materials; Dental Porcelain; Humans; Materials Testing; Methacrylates; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Resin Cements; Silanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Yttrium; Zirconium

2014
Influence of multimode universal adhesives and zirconia primer application techniques on zirconia repair.
    The Journal of prosthetic dentistry, 2014, Volume: 112, Issue:2

    Topics: Aluminum Oxide; Ceramics; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Prosthesis Repair; Dental Stress Analysis; Humans; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Polymerization; Resin Cements; Shear Strength; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium

2014
Adhesively luted zirconia restorations: why and how?
    The journal of adhesive dentistry, 2014, Volume: 16, Issue:3

    Topics: Aluminum Oxide; Composite Resins; Dental Bonding; Dental Etching; Dental Materials; Dental Prosthesis; Humans; Methacrylates; Resin Cements; Silanes; Surface Properties; Zirconium

2014
Bonding a veneered zirconia anterior fixed partial denture.
    Compendium of continuing education in dentistry (Jamesburg, N.J. : 1995), 2015, Volume: 36, Issue:1

    Topics: Acid Etching, Dental; Aluminum Oxide; Dental Bonding; Dental Polishing; Dental Porcelain; Dental Veneers; Denture Design; Denture, Partial, Fixed; Female; Humans; Methacrylates; Middle Aged; Surface Properties; Zirconium

2015
Bonding Effectiveness to Differently Sandblasted Dental Zirconia.
    The journal of adhesive dentistry, 2015, Volume: 17, Issue:3

    Topics: Aluminum Oxide; Ceramics; Dental Bonding; Dental Etching; Dental Materials; Elastic Modulus; Humans; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Random Allocation; Resin Cements; Silanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Water; Yttrium; Zirconium

2015
Effect of Adhesive Resin Type for Bonding to Zirconia Using Two Surface Pretreatments.
    The journal of adhesive dentistry, 2015, Volume: 17, Issue:4

    Topics: Acid Etching, Dental; Adhesiveness; Air Abrasion, Dental; Aluminum Oxide; Ceramics; Dental Bonding; Dental Cements; Dental Etching; Humans; Hydrolysis; Materials Testing; Methacrylates; Random Allocation; Resin Cements; Shear Strength; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water; Yttrium; Zirconium

2015
Adhesive bonding of alumina air-abraded Ag-Pd-Cu-Au alloy with 10-methacryloyloxydecyl dihydrogen phosphate.
    Dental materials journal, 2020, Mar-31, Volume: 39, Issue:2

    Topics: Aluminum Oxide; Dental Alloys; Dental Bonding; Dental Cements; Materials Testing; Methacrylates; Resin Cements; Shear Strength; Surface Properties

2020
Effect of airborne-particle abrasion and polishing on novel translucent zirconias: Surface morphology, phase transformation and insights into bonding.
    Journal of prosthodontic research, 2021, Feb-24, Volume: 65, Issue:1

    Topics: Aluminum Oxide; Ceramics; Dental Bonding; Dental Stress Analysis; Materials Testing; Methacrylates; Resin Cements; Shear Strength; Surface Properties; Zirconium

2021
Shear bond strength of an acrylic resin to a ceria-stabilized zirconia-alumina nanocomposite.
    The Journal of prosthetic dentistry, 2022, Volume: 128, Issue:4

    Topics: Acrylic Resins; Aluminum Oxide; Dental Bonding; Dental Stress Analysis; Humans; Materials Testing; Nanocomposites; Resin Cements; Shear Strength; Surface Properties; Zirconium

2022
MDP Salts: A New Bonding Strategy for Zirconia.
    Journal of dental research, 2022, Volume: 101, Issue:7

    Topics: Aluminum Oxide; Dental Bonding; Materials Testing; Methacrylates; Resin Cements; Salts; Shear Strength; Silanes; Surface Properties; Zirconium

2022