5-hydroxymethylfurfural and 4-methylimidazole

The inhibitory effects of liquiritigenin, liquiritin and glycyrrhizic acid against the hazards during the preparation of thermal reaction beef flavoring were investigated using high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). Liquiritigenin(1.5 mM) inhibited N

Topics: Animals; Cattle; Free Radicals; Glycation End Products, Advanced; Glycyrrhizic Acid; Lysine; Meat; Pyruvaldehyde; Tandem Mass Spectrometry

Topics: Chromatography, High Pressure Liquid; Fermentation; Furaldehyde; Imidazoles; Soy Foods; Tandem Mass Spectrometry

A method for simultaneous determination of 4-methylimidazole (4-MeI), 2-methylimidazole (2-MeI) and 5-hydroxymethylfurfural (HMF) in beverages was developed using solid-phase extraction (SPE) and amino trap column coupled with pulsed amperometric detection (AMTC-PAD). A single amino trap column (P/N: 046122) was first applied to separate the targeted analytes in samples after SPE pretreatment. This method demonstrated low limit of quantification (0.030mg/L for methylimidazoles and 0.300mg/L for HMF) and excellent linearity with correlation of determination (R(2)=0.999 for 2-MeI, 0.997 for 4-MeI and 0.998 for HMF). Nearly no 2-MeI was found in all soft drinks. However, 4-MeI could be detected in cola drinks and soft drinks containing caramel colour (ranging from 0.13 to 0.34mg/L), whereas HMF were only found in cola drinks (ranging from 1.07 to 4.47mg/L). Thus, AMTC-PAD technique would be a valid and inexpensive alternative to analysis of 4-MeI, 2-MeI and HMF.

Topics: Beverages; Chromatography, High Pressure Liquid; Chromatography, Ion Exchange; Electrochemical Techniques; Furaldehyde; Imidazoles; Solid Phase Extraction

2-Methylimidazole, 4-methylimidazole (2-MI and 4-MI), 2-acetyl-4-(1,2,3,4-tetrahydroxybutyl) imidazole (THI) and 5-hydroxymethylfurfural (5-HMF) are neo-formed compounds generated during the manufacture of caramel colours and are transferred to the processed food. These contaminants are known to have a toxicological profile that may pose health risks. Hence, to characterise THI, 2- and 4-MI and 5-HMF levels in liquid foods, an ultra-high-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method was developed and sample preparation was divided into two analytical strategies depending on the concentration range expected in the type of foods targeted. For the determination of the imidazole substitutes (THI, 2- and 4-MI), a sample enrichment and clean-up step by strong cation solid-phase extraction was developed. This method is capable of quantifying over a range of 5 ng ml⁻¹ (LOQ) to 500 ng ml⁻¹ with recoveries of 75.4-112.4% and RSDs of 1.5-15%. For determination of 5-HMF, a standard addition method was applied covering the linear range of 0.25-30 µg ml⁻¹ with RSDs from 2.8% (for intraday precision) to 9.2% (for intermediate precision). The validated analytical methods were applied to 28 liquid food samples purchased from local markets. THI was found only in the beer samples at levels up to 141.2 ng ml⁻¹. For 2-MI, non-quantifiable traces were observed for all samples, while 4-MI was observed in all samples with large concentration variations (from < LOQ to 563.9 ng ml⁻¹). 5-HMF was found at expected concentrations, except for a sherry vinegar sample (113 µg ml⁻¹), which required a high level of dilution before following the standard addition protocol.

Topics: Acetic Acid; Analytic Sample Preparation Methods; Beer; Beverages; Chromatography, High Pressure Liquid; Condiments; Food Coloring Agents; Food Contamination; Food Inspection; France; Furaldehyde; Imidazoles; Limit of Detection; Molecular Structure; Reproducibility of Results; Solid Phase Extraction; Spectrometry, Mass, Electrospray Ionization; Tandem Mass Spectrometry

An ultrahigh-performance liquid chromatography (UHPLC) tandem mass spectrometric (MS/MS) method was developed for the simultaneous quantification of 2-acetyl-4-tetrahydroxybutylimidazole (THI), 2- and 4-methylimidazoles (2-MI and 4-MI), and 5-hydroxymethylfurfural (HMF) in beverage samples. A C30 reversed-phase column was used in this method, providing sufficient retention and total resolution for all targeted analytes, with an MS/MS instrument operated in selected reaction monitoring (SRM) mode for sensitive and selective detection using isotope-labeled 4-methyl-d(3)-imidazole (4-MI-d(3)) as the internal standard (IS). This method demonstrates lower limit of quantification (LLOQ) at 1 ng/mL and coefficient of determination (r(2)) >0.999 for each analyte with a calibration range established from 1 to 500 ng/mL. This method also demonstrates excellent quantification accuracy (84.6-105% at 5 ng/mL, n = 7), precision (RSD < 7% at 5 ng/mL, n = 7), and recovery (88.8-99.5% at 10, 100, and 200 ng/mL, n = 3). Seventeen carbonated beverage samples were tested (n = 2) in this study including 13 dark-colored beverage samples with different flavors and varieties and 4 light-colored beverage samples. Three target analytes were quantified in these samples with concentrations in the range from 284 to 644 ng/mL for 4-MI and from 706 to 4940 ng/mL for HMF. THI was detected in only one sample at 6.35 ng/mL.

Topics: Carbonated Beverages; Chromatography, High Pressure Liquid; Food Coloring Agents; Food Contamination; Furaldehyde; Imidazoles; Tandem Mass Spectrometry