5-hydroxymethylfurfural and 2-5-dimethylfuran

Recent developments in the transformation of biobased 5-hydroxymethylfurfural (HMF) into a potential liquid fuel, 2,5-dimethylfuran (DMF), are summarised. This review focuses briefly on the history of HMF conversion to DMF in terms of the feedstock used and emphasises the ideal requirements in terms of the catalytic properties needed in HMF transformation into DMF. The recent state of the art and works on HMF transformation into DMF are discussed in comparison to noble metals and non-noble metals as well as bimetallic catalysts. The effect of the support used and the reaction conditions are also discussed. The recommendations for future work and challenges faced are specified.

Topics: Biofuels; Biomass; Catalysis; Furaldehyde; Furans; Hydrogenation; Lignin; Metals

The search for non-noble metal catalysts for chemical transformations is of paramount importance. In this study, an efficient non-noble metal catalyst for hydrogenation, hexagonal close-packed cobalt (HCP-Co), was synthesized through a simple one-step reduction of β-Co(OH)

Topics: Adsorption; Cobalt; Hydrogenation

The interface site between metal and support possess unique electronic and morphological structure, providing distinct active centers for favorable reaction in catalytic conversion of biomass derivatives to valuable chemicals. In this study, a series of Cu-Co/CeO

Topics: Biofuels; Furaldehyde; Furans

Designing highly efficient and low-cost catalysts for conversion of renewable biomass into high value-added chemicals and biofuels is important and challenging. Herein, a non-noble Ni-Mn bifunctional catalyst supported on activated carbon (Ni-Mn/AC) was developed by an incipient wetness impregnation method. The catalyst was found to be economic and efficient for the selective hydrodeoxygenation of biomass-derived 5-hydroxymethylfurfural (5-HMF) to 2,5-dimethylfuran (2,5-DMF). The optimal Ni-Mn/AC (Ni/Mn=3) catalyst achieved 98.5 % 2,5-DMF yield with 100 % conversion of 5-HMF under mild reaction conditions of 180 °C, 2.0 MPa H

Topics: Catalysis; Charcoal; Furaldehyde; Furans

The development of precious-metal-free catalysts to promote the sustainable production of fuels and chemicals from biomass remains an important and challenging target. Here, we report the efficient hydrogenolysis of biomass-derived 5-hydroxymethylfurfural to 2,5-dimethylfuran over a unique core-shell structured catalyst, Co@CoO that affords the highest productivity among all catalysts, including noble-metal-based catalysts, reported to date. Surprisingly, we find that the catalytically active sites reside on the shell of CoO with oxygen vacancies rather than the metallic Co. The combination of various spectroscopic experiments and computational modelling reveals that the CoO shell incorporating oxygen vacancies not only drives the heterolytic cleavage, but also the homolytic cleavage of H

Topics: Biomass; Furaldehyde; Furans; Metals; Oxygen

Bacillus benzeovorans assisted and supported growth of ruthenium (bio-Ru) and palladium/ruthenium (bio-Pd@Ru) core@shell nanoparticles (NPs) as bio-derived catalysts. Characterization of the bio-NPs using various electron microscopy techniques and high-angle annular dark field (HAADF) analysis confirmed two NP populations (1-2 nm and 5-8 nm), with core@shells in the latter. The Pd/Ru NP lattice fringes, 0.231 nm, corresponded to the (110) plane of RuO

Topics: Bacillus; Biofuels; Catalysis; Furaldehyde; Furans; Industrial Microbiology; Metal Nanoparticles; Microscopy, Electron, Transmission; Oxidation-Reduction; Palladium; Photoelectron Spectroscopy; Recycling; Ruthenium

This work provided the first example of selective hydrodeoxygenation of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) over heterogeneous Fe catalysts. A catalyst prepared by the pyrolysis of an Fe-phenanthroline complex on activated carbon at 800 °C was demonstrated to be the most active heterogeneous Fe catalyst. Under the optimal reaction conditions, complete conversion of HMF was achieved with 86.2 % selectivity to DMF. The reaction pathway was investigated thoroughly, and the hydrogenation of the C=O bond in HMF was demonstrated to be the rate-determining step during the hydrodeoxygenation, which could be accelerated greatly by using alcohol solvents as additional H-donors. The excellent stability of the Fe catalyst, which was probably a result of the well-preserved active species and the pore structure of the Fe catalyst in the presence of H

Topics: Catalysis; Furaldehyde; Furans; Hydrogen; Iron; Oxygen; Pressure; Solvents; Temperature

Noble-metal-free copper-zinc nanoalloy (<150 nm) is found to be uniquely suited for the highly selective catalytic conversion of 5-hydroxymethylfurfural (HMF) to potential biofuels or chemical building blocks. Clean mixtures of 2,5-dimethylfuran (DMF) and 2,5-dimethyltetrahydrofuran (DMTHF) with combined product yields up to 97 % were obtained at 200-220 °C using 20-30 bar H2 . It is also possible to convert 10 wt % HMF solutions in CPME, with an excellent DMF yield of 90 %. Milder temperatures favor selective (95 %) formation of 2,5-furandimethanol (FDM). The one-pot conversion of fructose to valuable furan-ethers was also explored. Recycling experiments for DMF production show remarkable catalyst stability. Transmission electron microscopy (TEM) characterization provides more insight into morphological changes of this intriguing class of materials during catalysis.

Topics: Alloys; Catalysis; Copper; Furaldehyde; Furans; Green Chemistry Technology; Methanol; Nanostructures; Powders; Zinc

The food processing contaminants 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP), 5-hydroxymethylfurfural (HMF) and 2,5 dimethylfuran (DMF) are potentially both mutagenic and carcinogenic in vitro and/or in vivo, although data on DMF is lacking. The PHIP metabolite N-hydroxy-PhIP and HMF are bioactivated by sulfotransferases (SULTs). The substrate specificity and tissue distribution of SULTs differs between species. A single oral dose of PhIP, HMF or DMF was administered to wild-type (wt) mice and mice expressing human SULT1A1/1A2 (hSULT mice). DNA damage was studied using the in vivo alkaline single cell gel electrophoresis (SCGE) assay. No effects were detected in wt mice. In the hSULT mice, PhIP and HMF exposure increased the levels of DNA damage in the liver and kidney, respectively. DMF was not found to be genotoxic. The observation of increased DNA damage in hSULT mice compared with wt mice supports the role of human SULTs in the bioactivation of N-hydroxy-PhIP and HMF in vivo.

Topics: Administration, Oral; Animals; Arylsulfotransferase; Comet Assay; DNA Breaks, Double-Stranded; DNA Damage; Food Contamination; Food Handling; Furaldehyde; Furans; Humans; Imidazoles; Male; Mice, Transgenic; Mutagenicity Tests

Tunable and selective hydrogenation of the platform chemical 5-hydroxymethylfurfural into valuable C6 building blocks and liquid fuel additives is achieved with copper-doped porous metal oxides in ethanol. A new catalyst composition with improved hydrogenation/hydrogenolysis activity is obtained by introducing small amounts of ruthenium dopant into the previously reported Cu(0.59) Mg2.34 Al1.00 structure. At a mild reaction temperature (100 °C), 2,5-furandimethanol is obtained with excellent selectivity up to >99%. Higher reaction temperatures (220 °C) favor selective deoxygenation to 2,5-dimethylfuran and minor product 2,5-dimethyltetrahydrofuran with a combined yield as high as 81%. Notably, these high product yields are maintained at a substrate concentration up to 10 wt% and a low catalyst loading. The influence of different alcohol solvents on product selectivity is explored. Furthermore, reaction intermediates formed at different reaction temperatures are identified. The composition of these product mixtures provides mechanistic insight into the nature of the reduction pathways that influence product selectivity. The catalysts are characterized by elemental analysis, TEM, and BET techniques before and after the reaction. Catalyst recycling experiments are conducted in batch and in a continuous-flow setup.

Topics: Catalysis; Copper; Furaldehyde; Furans; Oxides; Porosity; Pressure; Ruthenium; Solvents; Temperature

2,5-Dimethylfuran (DMF), a promising cellulosic biofuel candidate from biomass derived intermediates, has received significant attention because of its low oxygen content, high energy density, and high octane value. A bimetallic catalyst combination containing a Lewis-acidic Zn(II) and Pd/C components is effective for 5-hydroxymethylfurfural (HMF) hydrodeoxygenation (HDO) to DMF with high conversion (99%) and selectivity (85% DMF). Control experiments for evaluating the roles of zinc and palladium revealed that ZnCl2 alone did not catalyze the reaction, whereas Pd/C produced 60% less DMF than the combination of both metals. The presence of Lewis acidic component (Zn) was also found to be beneficial for HMF HDO with Ru/C catalyst, but the synergistic effect between the two metal components is more pronounced for the Pd/Zn system than the Ru/Zn. A comparative analysis of the Pd/Zn/C catalyst to previously reported catalytic systems show that the Pd/Zn system containing at least four times less precious metal than the reported catalysts gives comparable or better DMF yields. The catalyst shows excellent recyclability up to 4 cycles, followed by a deactivation, which could be due to coke formation on the catalyst surface. The effectiveness of this combined bimetallic catalyst has also been tested for one-pot conversion of fructose to DMF.

Topics: Biomass; Carbon; Catalysis; Furaldehyde; Furans; Palladium; Recycling; Zinc

RuC ees' transfer: Transfer hydrogenation using alcohols as hydrogen donors and supported ruthenium catalysts results in the selective conversion of hydroxymethylfurfural to dimethylfuran (>80% yield). During transfer hydrogenation, the hydrogen produced from alcohols is utilized in the hydrogenation of hydroxymethylfurfural.

Topics: Carbon; Catalysis; Furaldehyde; Furans; Hydrogenation; Ruthenium; Temperature

Car-Parrinello based ab initio molecular dynamics (CPMD) coupled with metadynamics (MTD) simulations were carried out to investigate the mechanism and energetics for acid-catalyzed β-d-glucose conversion to 5-hydroxymethylfurfurl (HMF) in water. HMF is a critical intermediate for biomass conversion to biofuels. It was found that protonation of the C2-OH on glucose, the breakage of the C2-O2 bond, and the formation of the C2-O5 bond is the critical rate-limiting step for the direct glucose conversion to HMF without converting to fructose first, contrary to the wide-spread assumption in literature that fructose is the main intermediate for glucose conversion to HMF. The calculated reaction barrier of 30-35 kcal/mol appears to be solvent-induced and is in excellent agreement with experimental observations.

Topics: Acids; Biofuels; Catalysis; Chemistry, Organic; Furaldehyde; Furans; Glucose; Molecular Dynamics Simulation; Protons; Solvents; Thermodynamics; Water

Polyethylene terephthalate (PET) is a polymeric material with high global demand. Conventionally, PET is produced from fossil-fuel-based materials. Herein, we explored the feasibility of a sustainable method for PET production by using solely bio-renewable resources. Specifically, 2,5-dimethylfuran (derived from lignocellulosic biomass through 5-(hydroxymethyl)furfural) and acrolein (produced from glycerol, a side product of biodiesel production) were converted into the key intermediate p-xylene (a precursor of terephthalic acid). This synthesis consists of a sequential Diels-Alder reaction, oxidation, dehydration, and decarboxylation. In particular, the pivotal first step, the Diels-Alder reaction, was studied in detail to provide useful kinetic and thermodynamic data. Although it was found that this reaction requires low temperature to proceed efficiently, which presents a limitation on economic feasibility on an industrial scale, the concept was realized and bio-derived p-xylene was obtained in 34% overall yield over four steps.

Topics: Acrolein; Biofuels; Biomass; Catalysis; Furaldehyde; Furans; Glycerol; Molecular Structure; Polyethylene Terephthalates; Xylenes

Lignocellulosic biomass is a plentiful and renewable resource for fuels and chemicals. Despite this potential, nearly all renewable fuels and chemicals are now produced from edible resources, such as starch, sugars, and oils; the challenges imposed by notoriously recalcitrant and heterogeneous lignocellulosic feedstocks have made their production from nonfood biomass inefficient and uneconomical. Here, we report that N,N-dimethylacetamide (DMA) containing lithium chloride (LiCl) is a privileged solvent that enables the synthesis of the renewable platform chemical 5-hydroxymethylfurfural (HMF) in a single step and unprecedented yield from untreated lignocellulosic biomass, as well as from purified cellulose, glucose, and fructose. The conversion of cellulose into HMF is unabated by the presence of other biomass components, such as lignin and protein. Mechanistic analyses reveal that loosely ion-paired halide ions in DMA-LiCl are critical for the remarkable rapidity (1-5 h) and yield (up to 92%) of this low-temperature (

Topics: Acetamides; Bioelectric Energy Sources; Biomass; Fructose; Furaldehyde; Furans; Glucose; Lignin; Lithium Chloride