Page last updated: 2024-08-23

4-methacryloxyethyltrimellitic acid anhydride and silver

4-methacryloxyethyltrimellitic acid anhydride has been researched along with silver in 20 studies

Research

Studies (20)

TimeframeStudies, this research(%)All Research%
pre-19903 (15.00)18.7374
1990's9 (45.00)18.2507
2000's6 (30.00)29.6817
2010's2 (10.00)24.3611
2020's0 (0.00)2.80

Authors

AuthorsStudies
Atsuta, M; Matsumura, H; Tanaka, T1
Araki, Y; Endo, K; Ohno, H2
Ohno, H1
Atsuta, M; Hirano, M; Matsumura, H; Nagata, K; Tanaka, T1
Atsuta, M; Masuhara, E; Nakabayashi, N; Tanaka, T1
Motomura, M; Murakami, N; Takeya, M; Unemori, M; Yamamoto, Y1
Atsuta, M; Matsumura, H; Taira, Y; Yoshida, K1
Araki, Y; Endo, K; Iizuka, Y; Ohno, H; Yamane, Y1
Kakuta, K; Miyagawa, Y; Ogura, H; Rittapai, A; Suchatlampong, C; Urapepon, S2
Ogura, H; Urapepon, S1
Kakuta, K; Ogura, H; Rittapai, A; Suchatlampong, C; Urapepon, S1
Endo, K; Kawashima, I; Ohno, H; Yamane, Y1
Al-Ateeq, K; Al-Jasser, AM; Allen, GC; Jandt, KD; Vowles, RW1
Kakuta, K; Ogura, H; Urapepon, S1
Miyagawa, Y; Ogura, H; Soma, H1
Churnjitapirom, P; Goto, S; Miyagawa, Y; Ogura, H1
Bulbul, M; Kesim, B1
Endo, K; Furuta, K; Hashimoto, M; Kakino, K; Ohno, H1

Other Studies

20 other study(ies) available for 4-methacryloxyethyltrimellitic acid anhydride and silver

ArticleYear
Bonding fixed prosthodontic composite resin and precious metal alloys with the use of a vinyl-thiol primer and an adhesive opaque resin.
    The Journal of prosthetic dentistry, 1992, Volume: 67, Issue:3

    Topics: Adhesives; Composite Resins; Dental Alloys; Dental Bonding; Dental Cements; Dental Stress Analysis; Dental Veneers; Gold Alloys; Materials Testing; Methacrylates; Methylmethacrylate; Methylmethacrylates; Palladium; Silver; Stress, Mechanical; Surface Properties; Surface-Active Agents; Thermodynamics; Time Factors; Titanium; Triazines

1992
A new method for promoting adhesion between precious metal alloys and dental adhesives.
    Journal of dental research, 1992, Volume: 71, Issue:6

    Topics: Acrylic Resins; Adhesiveness; Adhesives; Alloys; Chromium Alloys; Dental Alloys; Dental Bonding; Dental Cements; Dental Polishing; Electroplating; Gallium; Gold Alloys; Indium; Materials Testing; Oxidation-Reduction; Silver; Surface Properties; Tensile Strength; Tin; Water

1992
ESCA study on dental alloy surfaces modified by Ga-Sn alloy.
    Journal of dental research, 1992, Volume: 71, Issue:6

    Topics: Acrylic Resins; Adhesiveness; Alloys; Boron Compounds; Chromium Alloys; Dental Alloys; Dental Bonding; Electron Probe Microanalysis; Gallium; Gold Alloys; Indium; Materials Testing; Microscopy, Electron, Scanning; Oxidation-Reduction; Silver; Surface Properties; Tensile Strength; Tin; Tin Compounds

1992
New conversion method of metal surfaces for resin bonding. Conversion effects for pure metals in dental precious metal alloys.
    Dentistry in Japan, 1990, Volume: 27, Issue:1

    Topics: Acrylic Resins; Dental Alloys; Dental Bonding; Dental Cements; Gallium; Gold Alloys; Silver; Spectrum Analysis; Surface Properties; Tin

1990
[Study on ion-coating surface treatment of dental alloys for adhesion. 2. Effect of Sn and Cu-Sn target on Au-Ag-Pd alloy].
    Nihon Hotetsu Shika Gakkai zasshi, 1989, Volume: 33, Issue:3

    Topics: Acrylic Resins; Adhesiveness; Copper; Dental Bonding; Dental Cements; Gold Alloys; Ions; Palladium; Silver; Tin

1989
Surface treatment of gold alloys for adhesion.
    The Journal of prosthetic dentistry, 1988, Volume: 60, Issue:3

    Topics: Acrylic Resins; Adhesiveness; Dental Bonding; Gold Alloys; Hot Temperature; Palladium; Silver; Stress, Mechanical; Surface Properties; Tensile Strength

1988
Surface preparation of the dental Au-Ag-Pd alloy for improving adhesion to 4-META/MMA-TBB resin cement.
    Dental materials journal, 1988, Volume: 7, Issue:1

    Topics: Acrylic Resins; Adhesiveness; Dental Bonding; Dental Cements; Gold Alloys; Palladium; Silver; Surface Properties

1988
Effect of adhesive metal primers on bonding a prosthetic composite resin to metals.
    The Journal of prosthetic dentistry, 1993, Volume: 69, Issue:4

    Topics: Adhesives; Chromium Alloys; Composite Resins; Copper; Dental Bonding; Dental Debonding; Dental Stress Analysis; Gold Alloys; Materials Testing; Methacrylates; Palladium; Polyethylene Glycols; Polymethacrylic Acids; Silver; Stress, Mechanical; Surface Properties; Surface-Active Agents; Titanium; Triazines

1993
Adhesion of adhesive resin to dental precious metal alloys. Part I. New precious metal alloys with base metals for resin bonding.
    Dental materials journal, 1998, Volume: 17, Issue:4

    Topics: Acrylic Resins; Adhesiveness; Copper; Dental Alloys; Dental Bonding; Gold Alloys; Indium; Materials Testing; Oxides; Palladium; Resin Cements; Silver; Tin; Zinc

1998
Development of metal-resin composite restorative material. Part 2. Effects of acid and heat treatments of silver-tin filler particles on flexural properties of metal-resin composite.
    Dental materials journal, 1999, Volume: 18, Issue:2

    Topics: Acrylic Resins; Composite Resins; Dental Alloys; Dental Restoration, Permanent; Elasticity; Electron Probe Microanalysis; Hot Temperature; Hydrochloric Acid; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Pliability; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Silver; Surface Properties; Tin

1999
Metal-resin composite restorative material using powder-liquid system.
    Dental materials journal, 1999, Volume: 18, Issue:3

    Topics: Analysis of Variance; Composite Resins; Dental Alloys; Dental Restoration, Permanent; Elasticity; Immersion; Materials Testing; Methacrylates; Pliability; Powders; Regression Analysis; Silver; Tin; Water

1999
Development of metal-resin composite restorative materia. Part 1. Experimental composite using silver-tin alloy as filler and 4-META as coupling agent.
    Dental materials journal, 1999, Volume: 18, Issue:1

    Topics: Acrylic Resins; Composite Resins; Dental Alloys; Dental Restoration, Permanent; Elasticity; Materials Testing; Methacrylates; Pliability; Silver; Tensile Strength; Tin

1999
Development of metal-resin composite restorative material. Part 3. Flexural properties and condensability of metal-resin composite using Ag-Sn irregular particles.
    Dental materials journal, 2000, Volume: 19, Issue:2

    Topics: Analysis of Variance; Chemistry, Pharmaceutical; Composite Resins; Dental Alloys; Dental Restoration, Permanent; Elasticity; Materials Testing; Methacrylates; Particle Size; Pliability; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Silver; Statistics, Nonparametric; Surface Properties; Tin

2000
XPS study on the weakest zone in the adhesion structure between resin containing 4-META and precious metal alloys treated with different surface modification methods.
    Dental materials journal, 2001, Volume: 20, Issue:1

    Topics: Acrylic Resins; Adhesiveness; Boron Compounds; Dental Alloys; Dental Bonding; Dentin-Bonding Agents; Electron Probe Microanalysis; Electroplating; Gold Alloys; Materials Testing; Methacrylates; Methylmethacrylates; Oxidation-Reduction; Resin Cements; Silanes; Silver; Surface Properties; Surface-Active Agents; Triazines; Water

2001
Mechanical properties and radiopacity of experimental glass-silica-metal hybrid composites.
    Dental materials : official publication of the Academy of Dental Materials, 2002, Volume: 18, Issue:6

    Topics: Algorithms; Analysis of Variance; Bisphenol A-Glycidyl Methacrylate; Cermet Cements; Composite Resins; Confidence Intervals; Contrast Media; Copper; Glass Ionomer Cements; Humans; Materials Testing; Methacrylates; Particle Size; Pilot Projects; Polyhydroxyethyl Methacrylate; Resin Cements; Silver; Statistics as Topic; Stress, Mechanical; Surface Properties; Tensile Strength; Tin; Titanium

2002
Development of metal-resin composite restorative material. Part 5: Evaluation of the bonding between Ag-Sn particle and 4-META coupling agent of the metal-resin composite.
    Dental materials journal, 2003, Volume: 22, Issue:2

    Topics: Acid Etching, Dental; Adhesiveness; Composite Resins; Dental Alloys; Dental Bonding; Hot Temperature; Humans; Materials Testing; Methacrylates; Oxides; Pliability; Resin Cements; Silver; Spectrometry, X-Ray Emission; Stress, Mechanical; Surface Properties; Tin; Tin Compounds

2003
Setting and flexural properties of metal-resin composite using Ag-Cu particles as filler and chemical accelerator.
    Dental materials journal, 2003, Volume: 22, Issue:4

    Topics: Analysis of Variance; Benzoyl Peroxide; Composite Resins; Copper; Dental Alloys; Dental Restoration, Permanent; Elasticity; Materials Testing; Methacrylates; Pliability; Polymers; Polyurethanes; Silver

2003
Effect of additive metals, Sn, Ga, and In in Ag-Pd-Au-Cu alloys on initial bond strength of 4-META adhesive cement to these alloys.
    Dental materials journal, 2008, Volume: 27, Issue:5

    Topics: Acrylic Resins; Boron Compounds; Copper; Dental Alloys; Dental Bonding; Dental Stress Analysis; Gallium; Gold Alloys; Humans; Indium; Materials Testing; Methacrylates; Methylmethacrylates; Palladium; Resin Cements; Silver; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Tin; Water

2008
The effect of primers on shear bond strength of acrylic resins to different types of metals.
    The Journal of prosthetic dentistry, 2010, Volume: 103, Issue:5

    Topics: Acrylic Resins; Aluminum Oxide; Chromium Alloys; Dental Alloys; Dental Etching; Dental Materials; Dental Polishing; Dental Stress Analysis; Gold Alloys; Humans; Materials Testing; Methacrylates; Methylmethacrylates; Platinum; Resin Cements; Self-Curing of Dental Resins; Shear Strength; Silver; Stress, Mechanical; Surface Properties; Temperature; Thiones; Time Factors; Titanium; Water

2010
Visualization study on distortion of a metal frame by polymerization shrinkage and thermal contraction of resin.
    Dental materials journal, 2014, Volume: 33, Issue:1

    Topics: Acrylic Resins; Alloys; Copper; Gold; Hot Temperature; Lead; Materials Testing; Methacrylates; Polymerization; Silver; Surface Properties

2014