2,2-bis-(4-(2-methacryloxyethoxy)phenyl)propane has been researched along with hydroxyethyl methacrylate in 13 studies
Timeframe | Studies, this research(%) | All Research% |
---|---|---|
pre-1990 | 0 (0.00) | 18.7374 |
1990's | 2 (15.38) | 18.2507 |
2000's | 0 (0.00) | 29.6817 |
2010's | 11 (84.62) | 24.3611 |
2020's | 0 (0.00) | 2.80 |
Authors | Studies |
---|---|
Eliades, GC; Kakaboura, AI; Palaghias, G | 1 |
Budzikiewicz, H; Geurtsen, W; Spahl, W | 1 |
Chersoni, S; Demarco, FF; Münchow, EA; Ogliari, FA; Piva, E; Prati, C; Zanchi, CH | 1 |
Hiller, KA; Krifka, S; Schmalz, G; Schweikl, H; Seidenader, C | 1 |
Barros, MD; Garcia, JW; Lewis, SH; Morães, RR; Pfeifer, CS; Stansbury, JW; Wilson, ND; Yang, B | 1 |
Björkman, L; Jensen, E; Kleven, IS; Kopperud, HB; Lygre, GB; Lygre, H; Michelsen, VB; Svahn, J | 1 |
Bourbia, M; Cvitkovitch, DG; Finer, Y; Ma, D; Santerre, JP | 1 |
de Oliveira, IR; Münchow, EA; Ogliari, FA; Piva, E; Silva, MG; Zanchi, CH | 1 |
Barros, MD; Dailing, EA; Lewis, SH; Stansbury, JW | 1 |
Alonso, RC; Araújo, TG; de Araújo, GS; Puppin-Rontani, RM; Sfalcin, RA | 1 |
Arrais, CA; Cuadros-Sánchez, J; da Cruz, GK; Hass, V; Loguercio, AD; Reis, A; Szesz, A | 1 |
Hickel, R; Ilie, N; Par, M; Tarle, Z | 1 |
Aguiar, FHB; Flor-Ribeiro, MD; Graziano, TS; Marchi, GM; Stipp, RN | 1 |
13 other study(ies) available for 2,2-bis-(4-(2-methacryloxyethoxy)phenyl)propane and hydroxyethyl methacrylate
Article | Year |
---|---|
Laboratory evaluation of three visible light-cured resinous liners.
Topics: Acrylic Resins; Aluminum Silicates; Bisphenol A-Glycidyl Methacrylate; Chemical Phenomena; Chemistry, Physical; Chromatography, High Pressure Liquid; Composite Resins; Dental Cavity Lining; Dentin-Bonding Agents; Evaluation Studies as Topic; Hydroxyapatites; Methacrylates; Polyurethanes; Silicate Cement; Silicon Dioxide; Sodium Fluoride; Solubility; Spectroscopy, Fourier Transform Infrared; Stress, Mechanical; Tensile Strength; Urethane; Water | 1996 |
Determination of leachable components from four commercial dental composites by gas and liquid chromatography/mass spectrometry.
Topics: 4-Aminobenzoic Acid; Biocompatible Materials; Bisphenol A-Glycidyl Methacrylate; Camphor; Chromatography, High Pressure Liquid; Composite Resins; Dental Materials; Ethylene Glycol; Fibroblasts; Gas Chromatography-Mass Spectrometry; Glycols; Humans; Mass Spectrometry; Materials Testing; Methacrylates; Methanol; para-Aminobenzoates; Pentanes; Phenylglyoxal; Polyethylene Glycols; Polymers; Polymethacrylic Acids; Polyurethanes; Water | 1998 |
Development of experimental HEMA-free three-step adhesive system.
Topics: Acid Etching, Dental; Animals; Bisphenol A-Glycidyl Methacrylate; Cattle; Composite Resins; Dental Materials; Dental Stress Analysis; Dentin; Elastic Modulus; Ethanol; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Organophosphonates; Polyethylene Glycols; Polymethacrylic Acids; Random Allocation; Resin Cements; Solvents; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Water | 2010 |
Oxidative stress and cytotoxicity generated by dental composites in human pulp cells.
Topics: Bisphenol A-Glycidyl Methacrylate; Cell Culture Techniques; Cell Survival; Cells, Cultured; Coloring Agents; Composite Resins; Dental Materials; Dental Pulp; Flow Cytometry; Gentian Violet; Glass Ionomer Cements; Humans; Methacrylates; Oxidative Stress; Polyesters; Polyethylene Glycols; Polymethacrylic Acids; Reactive Oxygen Species; Resin Cements; Silorane Resins; Siloxanes | 2012 |
Improved dental adhesive formulations based on reactive nanogel additives.
Topics: Acid Etching, Dental; Bisphenol A-Glycidyl Methacrylate; Camphanes; Chemistry, Pharmaceutical; Composite Resins; Dental Bonding; Dentin; Dentin-Bonding Agents; Elastic Modulus; Humans; Hydrophobic and Hydrophilic Interactions; Materials Testing; Methacrylates; Nanoparticles; Pliability; Polymerization; Polyurethanes; Resin Cements; Solubility; Stress, Mechanical; Temperature; Tensile Strength; Time Factors; Transition Temperature; Viscosity; Water | 2012 |
Detection and quantification of monomers in unstimulated whole saliva after treatment with resin-based composite fillings in vivo.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Cavity Preparation; Dental Materials; Dental Restoration, Permanent; Dentin-Bonding Agents; Female; Follow-Up Studies; Gas Chromatography-Mass Spectrometry; Humans; Male; Methacrylates; Middle Aged; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Resin Cements; Saliva | 2012 |
Cariogenic bacteria degrade dental resin composites and adhesives.
Topics: Bisphenol A-Glycidyl Methacrylate; Chromatography, High Pressure Liquid; Composite Resins; Culture Media; Dental Caries; Dental Materials; Esterases; Humans; Methacrylates; Microscopy, Electron, Scanning; Photoelectron Spectroscopy; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Resin Cements; Spectroscopy, Fourier Transform Infrared; Streptococcus mutans; Surface Properties; Wettability | 2013 |
Replacing HEMA with alternative dimethacrylates in dental adhesive systems: evaluation of polymerization kinetics and physicochemical properties.
Topics: Adsorption; Bisphenol A-Glycidyl Methacrylate; Chemical Phenomena; Chemistry, Pharmaceutical; Composite Resins; Dental Materials; Elastic Modulus; Ethanol; Humans; Kinetics; Materials Testing; Methacrylates; Pliability; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyurethanes; Rheology; Solubility; Solvents; Stress, Mechanical; Viscosity; Water | 2014 |
Construction of monomer-free, highly crosslinked, water-compatible polymers.
Topics: Acetone; Biocompatible Materials; Butanones; Dental Materials; Elastic Modulus; Gels; Humans; Hydrophobic and Hydrophilic Interactions; Isocyanates; Materials Testing; Mercaptoethanol; Methacrylates; Nanostructures; Nitriles; Pliability; Polyethylene Glycols; Polymerization; Polymers; Polymethacrylic Acids; Stress, Mechanical; Surface Properties; Water | 2014 |
Bond Strength of Experimental Low-viscosity Resin Materials to Early Enamel Caries Lesions: Effect of Diluent/Solvent Addition.
Topics: Acid Etching, Dental; Composite Resins; Dental Bonding; Dental Caries; Dental Enamel; Dental Materials; Dental Stress Analysis; Ethanol; Humans; Humidity; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Phosphoric Acids; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Solvents; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors | 2015 |
Influence of delivered radiant exposure values on bonding of fiber posts to root canals.
Topics: Bicuspid; Bisphenol A-Glycidyl Methacrylate; Cementation; Dental Leakage; Dental Pulp Cavity; Humans; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyurethanes; Post and Core Technique; Radiation Dosage; Resin Cements; Silver Staining; Spectrum Analysis, Raman; Stress, Mechanical; Surface Properties; Tooth Apex | 2015 |
Real-time curing characteristics of experimental resin composites containing amorphous calcium phosphate.
Topics: Barium Compounds; Biocompatible Materials; Calcium Phosphates; Chemical Phenomena; Composite Resins; Curing Lights, Dental; Dental Materials; Kinetics; Materials Testing; Methacrylates; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Silicon Dioxide; Spectroscopy, Fourier Transform Infrared; Surface Properties; Time Factors; Zirconium | 2018 |
Effect of iodonium salt and chitosan on the physical and antibacterial properties of experimental infiltrants.
Topics: Analysis of Variance; Anti-Bacterial Agents; Chitosan; Composite Resins; Elastic Modulus; Flexural Strength; Lactobacillus acidophilus; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Microbial Sensitivity Tests; Polyethylene Glycols; Polymethacrylic Acids; Reference Values; Reproducibility of Results; Salts; Solubility; Statistics, Nonparametric; Streptococcus mutans | 2019 |