2,2-bis-(4-(2-methacryloxyethoxy)phenyl)propane has been researched along with bisphenol a-glycidyl methacrylate in 73 studies
Timeframe | Studies, this research(%) | All Research% |
---|---|---|
pre-1990 | 3 (4.11) | 18.7374 |
1990's | 9 (12.33) | 18.2507 |
2000's | 20 (27.40) | 29.6817 |
2010's | 38 (52.05) | 24.3611 |
2020's | 3 (4.11) | 2.80 |
Authors | Studies |
---|---|
Kagi, S; McCabe, JF | 1 |
Budzikiewicz, H; Geurtsen, W; Spahl, W | 2 |
Clarke, RL | 1 |
Bjorkner, B; Niklasson, B; Persson, K | 1 |
Hirabayashi, S; Hirasawa, T; Nakanishi, S; Nasu, I | 1 |
Faus Llacer, VJ; Ferrandez, A; Forner Navarro, L; Llena Puy, MC | 1 |
Eliades, GC; Kakaboura, AI; Palaghias, G | 1 |
Kildal, KK; Ruyter, IE | 1 |
Alanko, K; Kanerva, L | 1 |
Andreasen, JO; Farik, B; Kreiborg, S; Munksgaard, EC | 1 |
Hirschfeld, Z; Mass, E; Venezia, E; Ziskind, D | 1 |
Kanerva, L; Zwanenburg, R | 1 |
Grobler, SR; Oberholzer, TG; Rossouw, RJ | 1 |
Davidson, CL; Erickson, RL; Halvorson, RH | 1 |
Clineff, TD; DiCicco, MP; Erbe, EM; Pomrink, GJ | 1 |
D'Azevedo, MT; Marsola, FP; Nagem Filho, H; Nagem, HD | 1 |
Achilias, DS; Sideridou, ID | 1 |
Ge, J; Stansbury, J; Trujillo, M | 1 |
Feilzer, AJ; Kleverlaan, CJ | 1 |
Achilias, DS; Karabela, MM; Sideridou, ID | 1 |
Demarco, FF; Ely, C; Fortes, CB; Ogliari, FA; Petzhold, CL; Piva, E; Samuel, SM; Zanchi, CH | 1 |
Masouras, K; Silikas, N; Watts, DC | 1 |
Karabela, MM; Sideridou, ID; Vouvoudi, ECh | 1 |
Braga, RR; Ferracane, JL; Gonçalves, F; Pfeifer, CS | 1 |
Bhamra, GS; Fleming, GJ | 1 |
Correr-Sobrinho, L; Moraes, RR; Ogliari, FA; Petzhold, CL; Piva, E; Sinhoreti, MA | 1 |
Ferracane, JL; Kruzic, JJ; Shah, MB | 1 |
Hickel, R; Ilie, N | 2 |
Braga, RR; Kawano, Y; Pfeifer, CS; Silva, LR | 1 |
Braga, RR; Gonçalves, F; Kawano, Y; Pfeifer, C; Stansbury, JW | 1 |
Aalto-Korte, K; Henriks-Eckerman, ML; Jolanki, R; Jungewelter, S; Kuuliala, O | 1 |
Costella, AM; Oliveira, WS; Trochmann, JL | 1 |
Arenas, G; Asmusen, S; Cook, WD; Vallo, C | 1 |
Chersoni, S; Demarco, FF; Münchow, EA; Ogliari, FA; Piva, E; Prati, C; Zanchi, CH | 1 |
Ge, J; Lu, H; Stansbury, JW; Trujillo-Lemon, M | 1 |
Aktoren, O; Gencay, K; Oshida, Y; Tuna, EB | 1 |
Hiller, KA; Krifka, S; Schmalz, G; Schweikl, H; Seidenader, C | 1 |
Hickel, R; Huth, KC; Ilie, N; Valceanu, AS | 1 |
Brandt, WC; Correr-Sobrinho, L; Sinhoreti, MA; Tomaselli, Lde O | 1 |
Lakes, R; Papadogiannis, D; Papadogiannis, Y; Tolidis, K | 1 |
D'Ercole, S; Filippakos, A; Perrotti, V; Piattelli, A; Tripodi, D | 1 |
Karabela, MM; Sideridou, ID | 1 |
Barros, MD; Garcia, JW; Lewis, SH; Morães, RR; Pfeifer, CS; Stansbury, JW; Wilson, ND; Yang, B | 1 |
Bataglia, MP; Berger, SB; Consani, RL; Consani, S; Fugolin, AP; Guiraldo, RD; Lopes, MB; Moura, SK; Sinhoreti, MA | 1 |
Carluccio, F; D'Amario, M; D'Arcangelo, C; De Angelis, F; Vadini, M; Vitalone, LM | 1 |
Björkman, L; Jensen, E; Kleven, IS; Kopperud, HB; Lygre, GB; Lygre, H; Michelsen, VB; Svahn, J | 1 |
Atman, AP; da Costa, TR; Loguercio, AD; Reis, A; Serrano, AM | 1 |
Bradley, M; Miletic, V; Santini, A; Swift, MD | 1 |
Aref, J; Campillo, M; Sabatini, C | 1 |
Alnazzawi, A; Watts, DC | 1 |
Garcia, Lda F; Mundim, FM; Pires-de-Souza, Fde C; Silami, FD; Sinhoreti, MA | 1 |
Kumar, N; Sangi, L | 1 |
Alandia-Roman, CC; Cruvinel, DR; Panzeri, H; Pires-de-Souza, FC; Sousa, AB | 1 |
Freitas, AP; Jumaily, S; Passos, SP; Rizkalla, AS; Santos, GC; Santos, MJ | 1 |
Czasch, P; Ilie, N | 1 |
Bacchi, A; Cavalcante, LM; Consani, RL; Feitosa, VP; Pfeifer, CS; Schneider, LF; Sinhoreti, MA | 1 |
Lakes, RS; Papadogiannis, D; Papadogiannis, Y; Tolidis, K | 1 |
Alves, PM; de Carvalho, FG; de Sampaio, GA; dos Santos, RL; Guênes, GM; Pithon, MM | 1 |
Garoushi, S; Lassila, L; Säilynoja, E; Vallittu, PK | 1 |
Haugen, HJ; Johnsen, GF; Kleven, IS; Kopperud, HM; Lamolle, S; Wellendorf, H | 1 |
Kerby, RE; Knobloch, LA; Peregrina, A; Sharples, S | 1 |
Bauer, J; Carvalho, CN; Gama, AC; Loguercio, AD; Moraes, AG; Yamasaki, LC | 1 |
Bourbia, M; Cvitkovitch, DG; Finer, Y; Ma, D; Santerre, JP | 1 |
Alves-Júnior, C; Barreto, AS; Borges, BC; Braz, R; Gomes, CL; Montes, MA; Pinheiro, IV; Silva, TR | 1 |
de Oliveira, IR; Münchow, EA; Ogliari, FA; Piva, E; Silva, MG; Zanchi, CH | 1 |
Anami, LC; Bottino, MA; Gonçalves, Fde C; Melo, RM; Souza, AC; Valandro, LF | 1 |
Arrais, CA; Cuadros-Sánchez, J; da Cruz, GK; Hass, V; Loguercio, AD; Reis, A; Szesz, A | 1 |
Covaci, A; De Munck, J; Duca, RC; Godderis, L; Hoet, P; Poels, K; Pongprueksa, P; Van Landuyt, KL; Van Meerbeek, B | 1 |
Barszczewska-Rybarek, IM; Bociong, K; Chrószcz-Porębska, MW; Kopacz, K; Sokolowski, J; Szczesio-Wlodarczyk, A | 1 |
Johnston, WM; Leyva Del Rio, D | 1 |
Berghaus, E; Klocke, T; Maletz, R; Petersen, S | 1 |
4 trial(s) available for 2,2-bis-(4-(2-methacryloxyethoxy)phenyl)propane and bisphenol a-glycidyl methacrylate
Article | Year |
---|---|
The effect of composite resin application and radiation techniques on dye penetration in Class II direct composite resin restorations.
Topics: Bicuspid; Bisphenol A-Glycidyl Methacrylate; Coloring Agents; Composite Resins; Dental Cavity Preparation; Dental Enamel; Dental Leakage; Dental Marginal Adaptation; Dental Restoration, Permanent; Dentin; Hardness; Humans; Light; Methacrylates; Molar; Polyethylene Glycols; Polymethacrylic Acids; Surface Properties; Thermodynamics | 1999 |
Wear of dental sealing materials using the replication technique.
Topics: Bisphenol A-Glycidyl Methacrylate; Cariostatic Agents; Child; Composite Resins; Dental Impression Technique; Dental Restoration Wear; Female; Follow-Up Studies; Glass; Humans; Male; Methacrylates; Microscopy, Electron, Scanning; Molar; Pit and Fissure Sealants; Polyethylene Glycols; Polymethacrylic Acids; Replica Techniques; Silanes; Silicon Dioxide; Sodium Fluoride; Surface Properties | 2011 |
Durability of composite repair using different surface treatments.
Topics: Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Cements; Dental Etching; Dental Materials; Dental Restoration Repair; Diamond; Humans; Hydrophobic and Hydrophilic Interactions; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Resin Cements; Silver Staining; Stress, Mechanical; Surface Properties; Time Factors; Water | 2012 |
Repair bond strength in aged methacrylate- and silorane-based composites.
Topics: Aluminum Oxide; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Etching; Dental Stress Analysis; Humans; Materials Testing; Methacrylates; Polyurethanes; Silicones; Silorane Resins; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Water | 2013 |
69 other study(ies) available for 2,2-bis-(4-(2-methacryloxyethoxy)phenyl)propane and bisphenol a-glycidyl methacrylate
Article | Year |
---|---|
Mechanical properties of a composite inlay material following post-curing.
Topics: Bisphenol A-Glycidyl Methacrylate; Color; Composite Resins; Dental Bonding; Dental Leakage; Dental Stress Analysis; Hardness; Hardness Tests; Hot Temperature; Humans; Inlays; Least-Squares Analysis; Materials Testing; Methacrylates; Physical Phenomena; Physics; Polyethylene Glycols; Polymethacrylic Acids; Pressure; Surface Properties; Tensile Strength | 1991 |
[Study on the residual monomer contents of different light curing hybrid composite resins].
Topics: Bisphenol A-Glycidyl Methacrylate; Chromatography, Gas; Composite Resins; Mass Spectrometry; Methacrylates; Polymethacrylic Acids; Polyurethanes; Quartz | 1991 |
Dynamic mechanical thermal analysis of dental polymers. II. Bis-phenol A-related resins.
Topics: Aziridines; Benzhydryl Compounds; Bisphenol A-Glycidyl Methacrylate; Chemical Phenomena; Chemistry, Physical; Composite Resins; Dental Materials; Elasticity; Methacrylates; Phenols; Polycarboxylate Cement; Resins, Synthetic; Temperature; Viscosity | 1989 |
The sensitizing potential of di-(meth)acrylates based on bisphenol A or epoxy resin in the guinea pig.
Topics: Acrylates; Animals; Benzhydryl Compounds; Bisphenol A-Glycidyl Methacrylate; Chemical Phenomena; Chemistry; Chromatography, High Pressure Liquid; Dermatitis, Contact; Epoxy Resins; Female; Guinea Pigs; Methacrylates; Phenols; Polymethacrylic Acids | 1984 |
[Compositions of various visible light-cured composite resins and elutions of residual monomer from these cured resins].
Topics: Acetone; Alkanes; Bisphenol A-Glycidyl Methacrylate; Chromatography, High Pressure Liquid; Composite Resins; Light; Methacrylates; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Solubility | 1984 |
Composite resin inlays: a study of marginal adaptation.
Topics: Bicuspid; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Leakage; Humans; Inlays; Methacrylates; Microscopy, Electron, Scanning; Molar; Polyethylene Glycols; Polymethacrylic Acids; Surface Properties | 1993 |
Laboratory evaluation of three visible light-cured resinous liners.
Topics: Acrylic Resins; Aluminum Silicates; Bisphenol A-Glycidyl Methacrylate; Chemical Phenomena; Chemistry, Physical; Chromatography, High Pressure Liquid; Composite Resins; Dental Cavity Lining; Dentin-Bonding Agents; Evaluation Studies as Topic; Hydroxyapatites; Methacrylates; Polyurethanes; Silicate Cement; Silicon Dioxide; Sodium Fluoride; Solubility; Spectroscopy, Fourier Transform Infrared; Stress, Mechanical; Tensile Strength; Urethane; Water | 1996 |
How different curing methods affect mechanical properties of composites for inlays when tested in dry and wet conditions.
Topics: Absorption; Adsorption; Bisphenol A-Glycidyl Methacrylate; Chemical Phenomena; Chemistry, Physical; Composite Resins; Elasticity; Evaluation Studies as Topic; Inlays; Light; Materials Testing; Methacrylates; Mouth; Pliability; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Pressure; Solubility; Stress, Mechanical; Tensile Strength; Water | 1997 |
Stomatitis and perioral dermatitis caused by epoxy diacrylates in dental composite resins.
Topics: Acrylic Resins; Benzhydryl Compounds; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Materials; Dermatitis, Perioral; Epoxy Resins; Female; Humans; Methacrylates; Middle Aged; Stomatitis | 1998 |
Determination of leachable components from four commercial dental composites by gas and liquid chromatography/mass spectrometry.
Topics: 4-Aminobenzoic Acid; Biocompatible Materials; Bisphenol A-Glycidyl Methacrylate; Camphor; Chromatography, High Pressure Liquid; Composite Resins; Dental Materials; Ethylene Glycol; Fibroblasts; Gas Chromatography-Mass Spectrometry; Glycols; Humans; Mass Spectrometry; Materials Testing; Methacrylates; Methanol; para-Aminobenzoates; Pentanes; Phenylglyoxal; Polyethylene Glycols; Polymers; Polymethacrylic Acids; Polyurethanes; Water | 1998 |
Adhesive bonding of fragmented anterior teeth.
Topics: Animals; Bisphenol A-Glycidyl Methacrylate; Dental Bonding; Dental Stress Analysis; Dentin-Bonding Agents; Incisor; Materials Testing; Methacrylates; Polyethylene Glycols; Polymethacrylic Acids; Sheep; Tooth Crown; Tooth Fractures | 1998 |
Allergic contact reactions to poly(oxy-1,2-ethanediyl) alpha,alpha'-[(1-methylethylidene)di-4, 1-phenylene]bis[omega-[(2-methyl-1-oxo-2-propenyl)oxy](BIS-EMA) .
Topics: Adult; Allergens; Benzhydryl Compounds; Bisphenol A-Glycidyl Methacrylate; Dermatitis, Allergic Contact; Dermatitis, Occupational; Epoxy Compounds; Female; Gingivitis; Humans; Irritants; Male; Methacrylates; Middle Aged; Patch Tests; Stomatitis | 2000 |
[Polymerization shrinkage by 4 different types of dental materials].
Topics: Aluminum Silicates; Bisphenol A-Glycidyl Methacrylate; Compomers; Composite Resins; Dental Materials; Elasticity; Humans; Light; Methacrylates; Polyethylene Glycols; Polymers; Polymethacrylic Acids; Polyurethanes; Silicates; Silicon Dioxide; Statistics as Topic; Stress, Mechanical; Surface Properties; Time Factors; Zirconium | 2001 |
Energy dependent polymerization of resin-based composite.
Topics: Acrylic Resins; Aluminum Silicates; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Energy Transfer; Humans; Light; Lighting; Methacrylates; Polyethylene Glycols; Polymers; Polymethacrylic Acids; Polyurethanes; Radiation Dosage; Resin Cements; Silicon Dioxide; Spectroscopy, Fourier Transform Infrared; Statistics as Topic; Surface Properties; Time Factors; Zirconium | 2002 |
Evaluation of the reaction kinetics of CORTOSS, a thermoset cortical bone void filler.
Topics: Benzeneacetamides; Bisphenol A-Glycidyl Methacrylate; Bone Cements; Calorimetry, Differential Scanning; Composite Resins; Drug Stability; gamma-Globulins; Kinetics; Methacrylates; Models, Molecular; Molecular Conformation; Penicillin G; Polyethylene Glycols; Polymethacrylic Acids; Thermodynamics; Time Factors; Toluidines | 2003 |
Surface roughness of composite resins after finishing and polishing.
Topics: Aluminum Oxide; Analysis of Variance; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Polishing; Diamond; Humans; Methacrylates; Polyesters; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Siloxanes; Stainless Steel; Statistics as Topic; Surface Properties; Terpenes | 2003 |
Elution study of unreacted Bis-GMA, TEGDMA, UDMA, and Bis-EMA from light-cured dental resins and resin composites using HPLC.
Topics: Biocompatible Materials; Bisphenol A-Glycidyl Methacrylate; Chromatography, High Pressure Liquid; Composite Resins; Dental Materials; Dental Restoration, Permanent; Light; Materials Testing; Methacrylates; Polyethylene Glycols; Polymers; Polymethacrylic Acids; Polyurethanes; Solvents; Time Factors | 2005 |
Synthesis and photopolymerization of low shrinkage methacrylate monomers containing bulky substituent groups.
Topics: Benzhydryl Compounds; Bisphenol A-Glycidyl Methacrylate; Dental Materials; Humans; Kinetics; Light; Materials Testing; Methacrylates; Molecular Weight; Phenols; Pliability; Polyethylene Glycols; Polymers; Polymethacrylic Acids; Surface Properties; Transition Temperature | 2005 |
Polymerization shrinkage and contraction stress of dental resin composites.
Topics: Acrylic Resins; Barium Compounds; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Materials; Elasticity; Humans; Materials Testing; Methacrylates; Polyethylene Glycols; Polymers; Polymethacrylic Acids; Polyurethanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Tensile Strength; Viscosity; Zirconium | 2005 |
Sorption kinetics of ethanol/water solution by dimethacrylate-based dental resins and resin composites.
Topics: Absorption; Biocompatible Materials; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Materials; Diffusion; Ethanol; Kinetics; Methacrylates; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Silicon Dioxide; Solutions; Water; Zirconium | 2007 |
Influence of chain extender length of aromatic dimethacrylates on polymer network development.
Topics: Absorption; Adsorption; Bisphenol A-Glycidyl Methacrylate; Dental Materials; Elasticity; Ethylene Oxide; Humans; Hydrophobic and Hydrophilic Interactions; Light; Materials Testing; Methacrylates; Pliability; Polymers; Solubility; Spectroscopy, Fourier Transform Infrared; Temperature; Time Factors; Water | 2008 |
Correlation of filler content and elastic properties of resin-composites.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Materials; Elasticity; Glass; Humans; Materials Testing; Methacrylates; Polyethylene Glycols; Polymethacrylic Acids; Silicon Dioxide; Surface Properties; Titanium; Zirconium | 2008 |
Volumetric dimensional changes of dental light-cured dimethacrylate resins after sorption of water or ethanol.
Topics: Absorption; Adsorption; Algorithms; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Materials; Ethanol; Hot Temperature; Humans; Materials Testing; Methacrylates; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Solubility; Solvents; Surface Properties; Temperature; Time Factors; Water | 2008 |
Contraction stress determinants in dimethacrylate composites.
Topics: Bisphenol A-Glycidyl Methacrylate; Calorimetry, Differential Scanning; Composite Resins; Dental Materials; Elasticity; Humans; Materials Testing; Methacrylates; Pliability; Polyethylene Glycols; Polymers; Polymethacrylic Acids; Spectroscopy, Fourier Transform Infrared; Spectrum Analysis, Raman; Stress, Mechanical; Surface Properties; Tensile Strength | 2008 |
Influence of halogen irradiance on short- and long-term wear resistance of resin-based composite materials.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Curing Lights, Dental; Dental Materials; Dental Restoration Wear; Humans; Light; Materials Testing; Methacrylates; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Time Factors; Zirconium | 2009 |
Preparation and evaluation of dental resin luting agents with increasing content of bisphenol-A ethoxylated dimethacrylate.
Topics: Bisphenol A-Glycidyl Methacrylate; Dental Restoration, Permanent; Elastic Modulus; Hardness; In Vitro Techniques; Materials Testing; Methacrylates; Molecular Structure; Polyethylene Glycols; Polymethacrylic Acids; Resin Cements; Solubility; Spectroscopy, Fourier Transform Infrared; Tensile Strength; Water | 2010 |
Mechanistic aspects of fatigue crack growth behavior in resin based dental restorative composites.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Materials; Dental Polishing; Humans; Light; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Nanocomposites; Particle Size; Photochemical Processes; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Silicon Dioxide; Stress, Mechanical; Surface Properties; Time Factors; Water; Zirconium | 2009 |
Investigations on mechanical behaviour of dental composites.
Topics: Bisphenol A-Glycidyl Methacrylate; Ceramics; Compomers; Composite Resins; Compressive Strength; Dental Materials; Dentin-Bonding Agents; Elastic Modulus; Glass; Humans; Mechanical Phenomena; Methacrylates; Nanocomposites; Organically Modified Ceramics; Pliability; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Silanes; Silorane Resins; Temperature; Tensile Strength; Time Factors; Water | 2009 |
Bis-GMA co-polymerizations: influence on conversion, flexural properties, fracture toughness and susceptibility to ethanol degradation of experimental composites.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Stress Analysis; Elastic Modulus; Ethanol; Hardness; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Phase Transition; Pliability; Polyurethanes; Solubility | 2009 |
Influence of BisGMA, TEGDMA, and BisEMA contents on viscosity, conversion, and flexural strength of experimental resins and composites.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Materials; Elastic Modulus; Fourier Analysis; Humans; Materials Testing; Methacrylates; Pliability; Polyethylene Glycols; Polymers; Polymethacrylic Acids; Spectrum Analysis, Raman; Stress, Mechanical; Viscosity | 2009 |
Contact allergy to epoxy (meth)acrylates.
Topics: Acrylates; Adult; Benzhydryl Compounds; Bisphenol A-Glycidyl Methacrylate; Dermatitis, Allergic Contact; Dermatitis, Occupational; Epoxy Compounds; Epoxy Resins; Finland; Humans; Male; Methacrylates; Middle Aged; Occupations; Patch Tests; Retrospective Studies | 2009 |
Water sorption and diffusion coefficient through an experimental dental resin.
Topics: Adsorption; Bisphenol A-Glycidyl Methacrylate; Diffusion; Drug Storage; Materials Testing; Methacrylates; Models, Theoretical; Polyethylene Glycols; Polymethacrylic Acids; Reference Values; Resins, Synthetic; Time Factors; Water; Wettability | 2010 |
Photobleaching of camphorquinone during polymerization of dimethacrylate-based resins.
Topics: 4-Aminobenzoic Acid; Absorption; Algorithms; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Materials; Energy Transfer; Humans; Hydrogen; Light; Materials Testing; Methacrylates; para-Aminobenzoates; Polyethylene Glycols; Polymers; Polymethacrylic Acids; Polyurethanes; Radiation Dosage; Reducing Agents; Terpenes; Time Factors | 2009 |
Development of experimental HEMA-free three-step adhesive system.
Topics: Acid Etching, Dental; Animals; Bisphenol A-Glycidyl Methacrylate; Cattle; Composite Resins; Dental Materials; Dental Stress Analysis; Dentin; Elastic Modulus; Ethanol; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Organophosphonates; Polyethylene Glycols; Polymethacrylic Acids; Random Allocation; Resin Cements; Solvents; Stress, Mechanical; Surface Properties; Temperature; Tensile Strength; Time Factors; Water | 2010 |
Dental resins based on dimer acid dimethacrylates: a route to high conversion with low polymerization shrinkage.
Topics: Bisphenol A-Glycidyl Methacrylate; Chemical Phenomena; Chemistry, Pharmaceutical; Composite Resins; Dental Materials; Humans; Kinetics; Methacrylates; Photochemical Processes; Polyethylene Glycols; Polymers; Polymethacrylic Acids; Polyurethanes; Stress, Mechanical; Surface Properties | 2010 |
Elution of residual monomers from dental composite materials.
Topics: Bisphenol A-Glycidyl Methacrylate; Chromatography, High Pressure Liquid; Composite Resins; Curing Lights, Dental; Light-Curing of Dental Adhesives; Methacrylates; Particle Size; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyurethanes; Saliva, Artificial; Semiconductors | 2010 |
Investigations on a methacrylate-based flowable composite based on the SDR™ technology.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Materials; Dental Restoration, Permanent; Elastic Modulus; Elasticity; Hardness; Humans; Materials Testing; Methacrylates; Photoinitiators, Dental; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyurethanes; Silorane Resins; Siloxanes; Stress, Mechanical; Surface Properties; Technology, Dental; Viscosity | 2011 |
Oxidative stress and cytotoxicity generated by dental composites in human pulp cells.
Topics: Bisphenol A-Glycidyl Methacrylate; Cell Culture Techniques; Cell Survival; Cells, Cultured; Coloring Agents; Composite Resins; Dental Materials; Dental Pulp; Flow Cytometry; Gentian Violet; Glass Ionomer Cements; Humans; Methacrylates; Oxidative Stress; Polyesters; Polyethylene Glycols; Polymethacrylic Acids; Reactive Oxygen Species; Resin Cements; Silorane Resins; Siloxanes | 2012 |
Fracture toughness of dental restorative materials.
Topics: Algorithms; Bisphenol A-Glycidyl Methacrylate; Ceramics; Compomers; Composite Resins; Dental Materials; Glass; Glass Ionomer Cements; Humans; Materials Testing; Methacrylates; Nanocomposites; Organically Modified Ceramics; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Resin Cements; Silanes; Siloxanes; Stress, Mechanical; Surface Properties; Time Factors; Water | 2012 |
Can phenyl-propanedione influence Knoop hardness, rate of polymerization and bond strength of resin composite restorations?
Topics: Bisphenol A-Glycidyl Methacrylate; Chalcones; Composite Resins; Curing Lights, Dental; Dental Bonding; Dental Materials; Dental Restoration, Permanent; Glass; Hardness; Humans; Materials Testing; Methacrylates; Photochemical Processes; Photoinitiators, Dental; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyurethanes; Reducing Agents; Silanes; Silicon Dioxide; Spectrophotometry, Infrared; Stress, Mechanical; Terpenes | 2011 |
Viscoelastic properties of low-shrinking composite resins compared to packable composite resins.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Desiccation; Elastic Modulus; Elasticity; Hardness; Humans; Materials Testing; Methacrylates; Pliability; Polymerization; Shear Strength; Silorane Resins; Siloxanes; Surface Properties; Temperature; Viscosity; Water | 2011 |
Sorption of water, ethanol or ethanol/water solutions by light-cured dental dimethacrylate resins.
Topics: Absorption; Acrylic Resins; Bisphenol A-Glycidyl Methacrylate; Desiccation; Diffusion; Ethanol; Hydrophobic and Hydrophilic Interactions; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Solubility; Water | 2011 |
Improved dental adhesive formulations based on reactive nanogel additives.
Topics: Acid Etching, Dental; Bisphenol A-Glycidyl Methacrylate; Camphanes; Chemistry, Pharmaceutical; Composite Resins; Dental Bonding; Dentin; Dentin-Bonding Agents; Elastic Modulus; Humans; Hydrophobic and Hydrophilic Interactions; Materials Testing; Methacrylates; Nanoparticles; Pliability; Polymerization; Polyurethanes; Resin Cements; Solubility; Stress, Mechanical; Temperature; Tensile Strength; Time Factors; Transition Temperature; Viscosity; Water | 2012 |
Evaluation of the light energy transmission and bottom/top rate in silorane and methacrylate-based composites with different photoactivation protocols.
Topics: Bisphenol A-Glycidyl Methacrylate; Carbon Compounds, Inorganic; Composite Resins; Curing Lights, Dental; Hardness; Humans; Light; Materials Testing; Methacrylates; Photochemical Processes; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyurethanes; Radiation Dosage; Silicon Compounds; Silorane Resins; Siloxanes; Surface Properties; Temperature; Time Factors | 2011 |
Influence of curing time, overlay material and thickness on three light-curing composites used for luting indirect composite restorations.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Materials; Dental Restoration, Permanent; Dentin-Bonding Agents; Glass; Hardness; Humans; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyurethanes; Resin Cements; Surface Properties; Time Factors | 2012 |
Detection and quantification of monomers in unstimulated whole saliva after treatment with resin-based composite fillings in vivo.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Cavity Preparation; Dental Materials; Dental Restoration, Permanent; Dentin-Bonding Agents; Female; Follow-Up Studies; Gas Chromatography-Mass Spectrometry; Humans; Male; Methacrylates; Middle Aged; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Resin Cements; Saliva | 2012 |
Degree of conversion and microhardness of TPO-containing resin-based composites cured by polywave and monowave LED units.
Topics: Bisphenol A-Glycidyl Methacrylate; Camphor; Chromatography, High Pressure Liquid; Composite Resins; Curing Lights, Dental; Dental Materials; Hardness; Humans; Magnetic Resonance Spectroscopy; Materials Testing; Methacrylates; Microspectrophotometry; Phosphines; Photoinitiators, Dental; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyurethanes; Resin Cements; Spectrum Analysis, Raman | 2012 |
Color stability of ten resin-based restorative materials.
Topics: Analysis of Variance; Bisphenol A-Glycidyl Methacrylate; Color; Colorimetry; Composite Resins; Dental Restoration, Permanent; Light-Curing of Dental Adhesives; Methacrylates; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Water | 2012 |
Simultaneous determination of polymerization shrinkage, exotherm and thermal expansion coefficient for dental resin-composites.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Materials; Humans; Light-Curing of Dental Adhesives; Methacrylates; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyurethanes; Surface Properties; Temperature; Thermodynamics; Time Factors | 2012 |
Color stability of experimental composites containing different photoinitiators.
Topics: Algorithms; Aluminum Silicates; Bisphenol A-Glycidyl Methacrylate; Camphor; Chalcones; Color; Composite Resins; Curing Lights, Dental; Dental Materials; Dental Polishing; Light-Curing of Dental Adhesives; Methacrylates; Particle Size; Photoinitiators, Dental; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Silicon Dioxide; Steam; Temperature; Time Factors; Ultraviolet Rays | 2013 |
Water sorption, solubility, and resultant change in strength among three resin-based dental composites.
Topics: Absorption, Physicochemical; Adsorption; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Materials; Materials Testing; Methacrylates; Pliability; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Silicon Dioxide; Solubility; Stress, Mechanical; Time Factors; Water; Zirconium | 2014 |
Effect of cigarette smoke on color stability and surface roughness of dental composites.
Topics: Algorithms; Bisphenol A-Glycidyl Methacrylate; Color; Composite Resins; Dental Materials; Dental Polishing; Methacrylates; Nanocomposites; Nicotiana; Polyesters; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Silorane Resins; Smoke; Surface Properties; Toothbrushing | 2013 |
Comparison of mechanical properties of five commercial dental core build-up materials.
Topics: Algorithms; Barium Compounds; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Materials; Dental Stress Analysis; Elastic Modulus; Hardness; Humans; Materials Testing; Mechanical Phenomena; Methacrylates; Polyethylene Glycols; Polymethacrylic Acids; Post and Core Technique; Silicon Dioxide; Stress, Mechanical; Tensile Strength; Urethane | 2013 |
In vitro comparison of mechanical properties and degree of cure of a self-adhesive and four novel flowable composites.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Elastic Modulus; Glass; Hardness; Humans; Light-Curing of Dental Adhesives; Materials Testing; Mechanical Phenomena; Methacrylates; Microscopy, Electron, Scanning; Nanocomposites; Pliability; Polymerization; Resin Cements; Spectroscopy, Fourier Transform Infrared; Stress, Mechanical; Surface Properties; Temperature; Time Factors; Water | 2013 |
Mechanical viscoelastic behavior of dental adhesives.
Topics: Acrylates; Bisphenol A-Glycidyl Methacrylate; Dental Cements; Dentin-Bonding Agents; Elastic Modulus; Elasticity; Humans; Materials Testing; Mechanical Phenomena; Methacrylates; Pliability; Polymerization; Resin Cements; Shear Strength; Silorane Resins; Surface Properties; Temperature; Torque; Torsion, Mechanical; Viscosity; Water | 2013 |
Influence of degree of conversion on the biocompatibility of different composites in vivo.
Topics: Animals; Biocompatible Materials; Bisphenol A-Glycidyl Methacrylate; Cellulitis; Collagen; Composite Resins; Edema; Fibroblasts; Fourier Analysis; Giant Cells; Granulation Tissue; Male; Materials Testing; Methacrylates; Necrosis; Polyethylene; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Rats; Rats, Wistar; Resin Cements; Spectrophotometry, Infrared; Subcutaneous Tissue; Time Factors | 2014 |
Physical properties and depth of cure of a new short fiber reinforced composite.
Topics: Bisphenol A-Glycidyl Methacrylate; Chemical Phenomena; Composite Resins; Dental Materials; Elastic Modulus; Glass; Humans; Materials Testing; Methacrylates; Pliability; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polymethyl Methacrylate; Stress, Mechanical; Surface Properties | 2013 |
Effect of short LED lamp exposure on wear resistance, residual monomer and degree of conversion for Filtek Z250 and Tetric EvoCeram composites.
Topics: Bisphenol A-Glycidyl Methacrylate; Chromatography, High Pressure Liquid; Composite Resins; Curing Lights, Dental; Equipment Design; Humans; Light-Curing of Dental Adhesives; Materials Testing; Mechanical Phenomena; Methacrylates; Microscopy, Electron, Scanning; Polymerization; Polyurethanes; Spectrophotometry, Ultraviolet; Spectroscopy, Fourier Transform Infrared; Surface Properties; Tandem Mass Spectrometry; Time Factors; Toothbrushing | 2013 |
Mechanical properties of urethane and bis-acryl interim resin materials.
Topics: Acrylic Resins; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Materials; Dental Stress Analysis; Elastic Modulus; Humans; Materials Testing; Mechanical Phenomena; Methacrylates; Pliability; Polymerization; Polyurethanes; Stress, Mechanical; Temperature; Time Factors; Water | 2013 |
Properties of composite materials used for bracket bonding.
Topics: Acid Etching, Dental; Adhesiveness; Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Bonding; Dental Cements; Dental Enamel; Dental Stress Analysis; Elastic Modulus; Humans; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Orthodontic Appliances; Phosphoric Acids; Pliability; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Resin Cements; Shear Strength; Stress, Mechanical | 2013 |
Cariogenic bacteria degrade dental resin composites and adhesives.
Topics: Bisphenol A-Glycidyl Methacrylate; Chromatography, High Pressure Liquid; Composite Resins; Culture Media; Dental Caries; Dental Materials; Esterases; Humans; Methacrylates; Microscopy, Electron, Scanning; Photoelectron Spectroscopy; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Resin Cements; Spectroscopy, Fourier Transform Infrared; Streptococcus mutans; Surface Properties; Wettability | 2013 |
Preheating of resin-based flowable materials in a microwave device: a promising approach to increasing hardness and softening resistance under cariogenic challenge.
Topics: Acrylates; Bisphenol A-Glycidyl Methacrylate; Cariogenic Agents; Composite Resins; Dental Materials; Hardness; Hot Temperature; Humans; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Microwaves; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyurethanes; Root Canal Filling Materials; Surface Properties; Temperature; Time Factors | 2013 |
Replacing HEMA with alternative dimethacrylates in dental adhesive systems: evaluation of polymerization kinetics and physicochemical properties.
Topics: Adsorption; Bisphenol A-Glycidyl Methacrylate; Chemical Phenomena; Chemistry, Pharmaceutical; Composite Resins; Dental Materials; Elastic Modulus; Ethanol; Humans; Kinetics; Materials Testing; Methacrylates; Pliability; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyurethanes; Rheology; Solubility; Solvents; Stress, Mechanical; Viscosity; Water | 2014 |
Influence of insertion techniques for resin cement and mechanical cycling on the bond strength between fiber posts and root dentin.
Topics: Animals; Bisphenol A-Glycidyl Methacrylate; Cattle; Composite Resins; Dental Bonding; Dental Pulp Cavity; Dental Stress Analysis; Dentin; Glass; Materials Testing; Methacrylates; Polyethylene Glycols; Polymethacrylic Acids; Post and Core Technique; Random Allocation; Resin Cements; Stress, Mechanical; Surface Properties; Syringes; Temperature; Time Factors; Tooth Apex; Tooth, Nonvital; Water | 2015 |
Influence of delivered radiant exposure values on bonding of fiber posts to root canals.
Topics: Bicuspid; Bisphenol A-Glycidyl Methacrylate; Cementation; Dental Leakage; Dental Pulp Cavity; Humans; Light-Curing of Dental Adhesives; Materials Testing; Methacrylates; Microscopy, Electron, Scanning; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyurethanes; Post and Core Technique; Radiation Dosage; Resin Cements; Silver Staining; Spectrum Analysis, Raman; Stress, Mechanical; Surface Properties; Tooth Apex | 2015 |
Monomer elution in relation to degree of conversion for different types of composite.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Dental Materials; Ethanol; Materials Testing; Methacrylates; Polyethylene Glycols; Polymerization; Polymethacrylic Acids; Polyurethanes; Surface Properties; Tandem Mass Spectrometry | 2015 |
Can Modification with Urethane Derivatives or the Addition of an Anti-Hydrolysis Agent Influence the Hydrolytic Stability of Resin Dental Composite?
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Materials Testing; Methacrylates; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes; Sodium Hydroxide; Water | 2023 |
Effect of monomer composition and filler fraction on surface microhardness and depth of cure of experimental resin composites.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Materials Testing; Methacrylates; Polyethylene Glycols; Polymethacrylic Acids; Polyurethanes | 2023 |
Degree of conversion and residual monomer elution of 3D-printed, milled and self-cured resin-based composite materials for temporary dental crowns and bridges.
Topics: Bisphenol A-Glycidyl Methacrylate; Composite Resins; Crowns; Dental Materials; Ethanol; Materials Testing; Printing, Three-Dimensional; Water | 2023 |