1-hexyl-3-methylimidazolium and sulfuric-acid

1-hexyl-3-methylimidazolium has been researched along with sulfuric-acid* in 3 studies

Other Studies

3 other study(ies) available for 1-hexyl-3-methylimidazolium and sulfuric-acid

ArticleYear
Pretreatment of yellow pine in an acidic ionic liquid: extraction of hemicellulose and lignin to facilitate enzymatic digestion.
    Bioresource technology, 2013, Volume: 134

    The acidic ionic liquid 1-H-3-methylimidazolium chloride can effectively pretreat yellow pine wood chips under mild conditions for enzymatic saccharification. Wood samples were treated at temperatures between 110 and 150°C for up to 5 h in the ionic liquid and three fractions collected; a cellulose rich fraction, lignin, and an aqueous fraction. This treatment caused the hemicellulose and the lignin to be degraded and dissolved from the cell walls of the pine wood. The lignin was depolymerized and subsequently dissolved in the ionic liquid. This process occurred more quickly at higher temperatures, although at the highest temperatures tested, significant cellulose degradation also occurred. The cellulose rich fraction was saccharified using cellulase from Trichoderma viride, with longer pretreatment times at 130°C resulting in higher glucose yields.

    Topics: Biotechnology; Borates; Cellulase; Glucose; Imidazoles; Ionic Liquids; Lignin; Mannose; Pinus; Polysaccharides; Sulfuric Acids; Trichoderma

2013
Dispersive liquid-liquid microextraction and preconcentration of thallium species in water samples by two ionic liquids applied as ion-pairing reagent and extractant phase.
    Talanta, 2012, Jan-15, Volume: 88

    In the present work, a simple and highly sensitive analytical methodology for determination of Tl(+) and Tl(3+) species, based on the use of modern and non-volatile solvents, such as ionic liquids (ILs), was developed. Initially, Tl(+) was complexed by iodide ion at pH 1 in diluted sulfuric acid solution. Then, tetradecyl(trihexyl)phosphonium chloride ionic liquid (CYPHOS(®) IL 101) was used as ion-pairing reagent and a dispersive liquid-liquid microextraction (DLLME) procedure was developed by dispersing 60 mg of 1-hexyl-3-methylimidazolium hexafluorophosphate [C(6) mim][PF(6)] with 500 μL of ethanol in the aqueous solution. After the microextraction procedure was finished, the final IL phase was solubilized in methanol and directly injected into the graphite furnace of an electrothermal atomic absorption spectrometer (ETAAS). An extraction efficiency of 77% and a sensitivity enhancement factor of 100 were obtained with only 5.00 mL of sample. The limit of detection (LOD) was 3.3 ng L(-1) Tl while the relative standard deviation (RSD) was 5.3% (at 0.4 μg L(-1) Tl and n=10), calculated from the peak height of absorbance signals. The method was finally applied to determine Tl species in tap and river water samples after separation of Tl(3+) species. To the best of our knowledge, this work reports the first application of ILs for Tl extraction and separation in the analytical field.

    Topics: Borates; Fresh Water; Hydrogen-Ion Concentration; Imidazoles; Ionic Liquids; Limit of Detection; Liquid Phase Microextraction; Methanol; Organophosphorus Compounds; Rivers; Solutions; Spectrophotometry, Atomic; Sulfuric Acids; Temperature; Thallium

2012
Conversion of hexose into 5-hydroxymethylfurfural in imidazolium ionic liquids with and without a catalyst.
    Carbohydrate research, 2011, May-15, Volume: 346, Issue:7

    Conversion of fructose and glucose into 5-hydroxymethylfurfural (HMF) was investigated in various imidazolium ionic liquids, including 1-butyl-3-methylimidazolium chloride (BmimCl), 1-hexyl-3-methylimidazolium chloride (HmimCl), 1-octyl-3-methylimidazolium chloride (OmimCl), 1-benzyl-3-methylimidazolium chloride (BemimCl), 1-Butyl-2,3-dimethylimidazolium chloride (BdmimCl), and 1-butyl-3-methylimidazolium p-toluenesulfonate (BmimPS). The acidic C-2 hydrogen of imidazolium cations was shown to play a major role in the dehydration of fructose in the absence of a catalyst, such as sulfuric acid or CrCl(3). Both the alkyl groups of imidazolium cations and the type of anions affected the reactivity of the carbohydrates. Although, except BmimCl and BemimCl, other four ionic liquids could only achieve not more than 25% HMF yields without an additional catalyst, 60-80% HMF yields were achieved in HmimCl, BdmimCl, and BmimPS in the presence of sulfuric acid or CrCl(3) in sufficient quantities.

    Topics: Borates; Catalysis; Chlorides; Chromium Compounds; Fructose; Furaldehyde; Glucose; Imidazoles; Ionic Liquids; Sulfuric Acids

2011