1-butyl-3-methylimidazolium and 5-hydroxymethylfurfural

Mesoporous SBA-15 materials functionalized with propylsulfonic acid groups (SBA-15-SO(3)H) were synthesized through a conventional one-pot route. It was used as a catalyst for the selective synthesis of 5-hydroxymethylfurfural (HMF) from the dehydration of fructose using BmimCl as solvent. Reaction time, temperature and fructose concentration were investigated during the HMF synthesis procedure. The catalyst SBA-15-SO(3)H exhibits high fructose conversion (near 100%) and HMF selectivity (about 81%) with good stability in the HMF synthesis. It was a suitable catalyst to produce HMF from renewable carbohydrates in potential industrial process.

Topics: Catalysis; Fructose; Furaldehyde; Furans; Imidazoles; Ionic Liquids; Porosity; Silicon Dioxide; Substrate Specificity; Temperature; Time Factors; Water

5-Hydroxymethylfurfural (5-HMF) was successfully produced by the dehydration of fructose and glucose using lignin-derived solid acid catalyst in DMSO-[BMIM][Cl] (dimethyl sulfoxide and 1-butyl-3-methylimidazolium chloride) mixtures. Six solid acid catalysts were synthesized by carbonization and sulfonation of raw biomass materials, i.e., glucose, fructose, cellulose, lignin, bamboo and Jatropha hulls. It was found that lignin-derived solid acid catalyst (LCC) was the most active one in the dehydration of sugars. LCC coupled with microwave irradiation was used for the 5-HMF production, 84% 5-HMF yield with 98% fructose conversion rate was achieved at 110°C for 10 min. Furthermore, 99% glucose was converted with 68% 5-HMF yield under severer condition (160°C for 50 min). LCC was recycled for five times, 5-HMF yield declined only 7%. Use of LCC combined with DMSO-[BMIM][Cl] solution and microwave irradiation is a novel method for the effective production of 5-HMF.

Topics: Acids; Biomass; Catalysis; Dimethyl Sulfoxide; Fructose; Furaldehyde; Glucose; Imidazoles; Ionic Liquids; Lignin; Microwaves; Recycling; Time Factors

Direct conversion of carbohydrates into 5-hydroxymethylfurfural (HMF) catalyzed by germanium(IV) chloride in ionic liquids has been investigated in search of an efficient and environmentally friendly process. Monosaccharides D-fructose and D-glucose, disaccharides sucrose and maltose, and even the polysaccharide cellulose were successfully converted into HMF with good yields under mild conditions (yield up to 92 % in 5 min in the case of fructose). The structure of ionic liquids, catalyst loading, reaction temperature and water content had noticeable effects on this catalytic system. Addition of 5 Å molecular sieves during the dehydration of glucose resulted in an increase in HMF yield from 38.4 % to 48.4 %. A mechanism for glucose conversion to HMF catalyzed by germanium(IV) chloride was proposed according to ¹³C NMR spectra obtained in situ under different conditions using D-glucose-2-¹³C as the substrate.

Topics: Carbohydrates; Catalysis; Furaldehyde; Glucose; Imidazoles; Ionic Liquids; Organometallic Compounds; Salts; Temperature; Water